Used Pressure Intensifier for sale (14,011)

Condition: good (used), Mixing Tank, Mixer, Pressure Vessel, Heating Jacket, Chemical Industry, Used Equipment Design: Cylindrical tank with shallow dished bottom and top, equipped with an agitator. The tank bottom and shell are double-walled with a heating jacket. The tank lid is removable with a flanged bolt connection. The lid has a cleaning opening. Material Quality: Carbon steel with painted surface. Manufacturer: Robert Hinkel & Co Crjdpfxstrdyre Ab Usa Type: 9601 Volume: 200L Operating Pressure: 3 bar Electrical Data: 380V; 0.75kW; 2.0A

Year of construction: 2020, condition: new, PLC microprocessor control Crsdpfxofz Dvvs Ab Uoa • HMI operator panel • Phases changed manually or automatically - temporarily • Two separate circuits for water and chemistry, closed circuit • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible The control box is made of IP54 technology User manual, Declaration of conformity, 12 months warranty. ROMER pressure washers use metal sheet that provides protection against chemicals. The washer walls protect against splashing, thanks to the closed chemistry loop, the process can be carried out with small amounts of chemistry. Due to the small amount of refrigerant required, it is easy to heat and cheaper to buy, it also allows you to wash large dimensions impossible to wash in bath tubs. Filtration system Thanks to the filtration system, the chemistry works in a closed circuit, 3 filters of different thickness are used, which prevent garbage and grease from entering the circulation. The chemistry is stored in heated stainless steel tanks from where it is fed by a pump under pressure to the lance Washing of dimensions The pressure washer allows washing of large elements, optionally has a rotating platform that allows rotation of the cleaned element, elements can be applied to it with a forklift or crane. High pressure pumps The car wash has two preparation phases, both treatments have separate sets of pipes, pumps, wires and guns to minimize mixing of these agents during phase change. Drains have separate valves that manage the return of funds. The carwash is equipped with a logic controller that controls all components. The chemistry is pumped up to 20 bar using a very durable, acid-resistant AISI304 pump with several stages, 3 kW. The rinsing phase uses a high pressure piston pump with ceramic pistons with a capacity of 3kW and provides 160 - 200 bar.

Year of construction: 2020, condition: new, PLC microprocessor control • HMI operator panel • Phases changed manually or automatically - temporarily • Two separate circuits for water and chemistry, closed circuit • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible The control box is made of IP54 technology User manual, Declaration of conformity, 12 months warranty. ROMER pressure washers use metal sheet that provides protection against chemicals. The washer walls protect against splashing, thanks to the closed chemistry loop, the process can be carried out with small amounts of chemistry. Due to the small amount of refrigerant required, it is easy to heat and cheaper to buy, it also allows you to wash large dimensions impossible to wash in bath tubs. Filtration system Thanks to the filtration system, the chemistry works in a closed circuit, 3 filters of different thickness are used, which prevent garbage and grease from entering the circulation. The chemistry is stored in heated stainless steel tanks from where it is fed by a pump under pressure to the lance Washing of dimensions Cedpfx Abefz Ax Ss Uora The pressure washer allows washing of large elements, optionally has a rotating platform that allows rotation of the cleaned element, elements can be applied to it with a forklift or crane. High pressure pumps The car wash has two preparation phases, both treatments have separate sets of pipes, pumps, wires and guns to minimize mixing of these agents during phase change. Drains have separate valves that manage the return of funds. The carwash is equipped with a logic controller that controls all components. The chemistry is pumped up to 20 bar using a very durable, acid-resistant AISI304 pump with several stages, 3 kW. The rinsing phase uses a high pressure piston pump with ceramic pistons with a capacity of 3kW and provides 160 - 200 bar.

Year of construction: 2020, condition: new, PLC microprocessor control • HMI operator panel • Phases changed manually or automatically - temporarily • Two separate circuits for water and chemistry, closed circuit • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible The control box is made of IP54 technology User manual, Declaration of conformity, 12 months warranty. ROMER pressure washers use metal sheet that provides protection against chemicals. The washer walls protect against splashing, thanks to the closed chemistry loop, the process can be carried out with small amounts of chemistry. Due to the small amount of refrigerant required, it is easy to heat and cheaper to buy, it also allows you to wash large dimensions impossible to wash in bath tubs. Filtration system Thanks to the filtration system, the chemistry works in a closed circuit, 3 filters of different thickness are used, which prevent garbage and grease from entering the circulation. The chemistry is stored in heated stainless steel tanks from where it is fed by a pump under pressure to the lance Washing of dimensions The pressure washer allows washing of large elements, optionally has a rotating platform that allows rotation of the cleaned element, elements can be applied to it with a forklift or crane. Credpfx Ajflpmqob Uea High pressure pumps The car wash has two preparation phases, both treatments have separate sets of pipes, pumps, wires and guns to minimize mixing of these agents during phase change. Drains have separate valves that manage the return of funds. The carwash is equipped with a logic controller that controls all components. The chemistry is pumped up to 20 bar using a very durable, acid-resistant AISI304 pump with several stages, 3 kW. The rinsing phase uses a high pressure piston pump with ceramic pistons with a capacity of 3kW and provides 160 - 200 bar.

Year of construction: 2020, condition: new, PLC microprocessor control Crodpfxefzrapj Ab Uea • HMI operator panel • Phases changed manually or automatically - temporarily • Two separate circuits for water and chemistry, closed circuit • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible The control box is made of IP54 technology User manual, Declaration of conformity, 12 months warranty. ROMER pressure washers use metal sheet that provides protection against chemicals. The washer walls protect against splashing, thanks to the closed chemistry loop, the process can be carried out with small amounts of chemistry. Due to the small amount of refrigerant required, it is easy to heat and cheaper to buy, it also allows you to wash large dimensions impossible to wash in bath tubs. Filtration system Thanks to the filtration system, the chemistry works in a closed circuit, 3 filters of different thickness are used, which prevent garbage and grease from entering the circulation. The chemistry is stored in heated stainless steel tanks from where it is fed by a pump under pressure to the lance Washing of dimensions The pressure washer allows washing of large elements, optionally has a rotating platform that allows rotation of the cleaned element, elements can be applied to it with a forklift or crane. High pressure pumps The car wash has two preparation phases, both treatments have separate sets of pipes, pumps, wires and guns to minimize mixing of these agents during phase change. Drains have separate valves that manage the return of funds. The carwash is equipped with a logic controller that controls all components. The chemistry is pumped up to 20 bar using a very durable, acid-resistant AISI304 pump with several stages, 3 kW. The rinsing phase uses a high pressure piston pump with ceramic pistons with a capacity of 3kW and provides 160 - 200 bar.

Year of construction: 2020, condition: new, PLC microprocessor control • HMI operator panel • Phases changed manually or automatically - temporarily • Two separate circuits for water and chemistry, closed circuit • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible The control box is made of IP54 technology Crodpfx Abefz A D No Uea User manual, Declaration of conformity, 12 months warranty. ROMER pressure washers use metal sheet that provides protection against chemicals. The washer walls protect against splashing, thanks to the closed chemistry loop, the process can be carried out with small amounts of chemistry. Due to the small amount of refrigerant required, it is easy to heat and cheaper to buy, it also allows you to wash large dimensions impossible to wash in bath tubs. Filtration system Thanks to the filtration system, the chemistry works in a closed circuit, 3 filters of different thickness are used, which prevent garbage and grease from entering the circulation. The chemistry is stored in heated stainless steel tanks from where it is fed by a pump under pressure to the lance Washing of dimensions The pressure washer allows washing of large elements, optionally has a rotating platform that allows rotation of the cleaned element, elements can be applied to it with a forklift or crane. High pressure pumps The car wash has two preparation phases, both treatments have separate sets of pipes, pumps, wires and guns to minimize mixing of these agents during phase change. Drains have separate valves that manage the return of funds. The carwash is equipped with a logic controller that controls all components. The chemistry is pumped up to 20 bar using a very durable, acid-resistant AISI304 pump with several stages, 3 kW. The rinsing phase uses a high pressure piston pump with ceramic pistons with a capacity of 3kW and provides 160 - 200 bar.

Condition: not inspected (used), Year of construction: 2020, operating hours: 4,809 h, functionality: unexamined, operating pressure: 2,500 bar, overall weight: 2,030 kg, rotational speed (min.): 650 rpm, rotational speed (max.): 1,800 rpm, water tank capacity: 80 l, TECHNICAL DETAILS Working pressure: 600 - 2,500 bar Flow rate: 9 - 26 l/min Drive power: 160 kW / 132 kW motor Speed range: 650 - 1,800 rpm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 2,240 x 1,550 x 1,780 mm Total weight: 2,030 kg Input voltage: 400 V Power connection: 400 V / 50 Hz Fuse protection: 250 A Operating pressure water inlet: 2.0 - 8.0 bar Max. inlet temperature: +40 °C Water tank capacity: 80 l Pump speed range: 220 - 610 rpm Engine oil capacity: 10 l Noise level: 75 dB Operating hours: 4,809 h Codpfsyx Uwusx Ab Uora EQUIPMENT High-pressure pump with frequency converter (continuous operation 24 h/day) Standard accessories

Condition: good (used), Contact pressure gauge, pressure switch, pressure gauge, test pressure gauge, differential pressure switch, pressure switch, low pressure switch -Manufacturer: VDO, contact pressure gauge 0 - 400 bar -Voltage: up to 380 V -Switching capacity: 30W 50VA -Quantity: 1x pressure gauge available -Dimensions: 220/210/H140 mm -Weight: 1.8 kg Crsdpjyffm Eefx Ab Uja

Year of construction: 2020, condition: used, tank capacity: 2,700 l, GENERAL INFORMATION Equipment: Disc valve, spray head Design: upright Crsdpfxox Dlpcj Ab Uea Year of construction: 2020 Notes: Stated total height according to drawing; CE marking and declaration of conformity available only for 2 vessels External diameter: 1,650 mm Internal diameter: 1,450 mm Total height: 2,550 mm Heating/cooling: available Insulation: available Max. allowable operating overpressure: 3.0 bar Max. overpressure: 3.0 bar Base type: height-adjustable feet Location: outdoor storage Technical documentation: drawing, CE marking and declaration of conformity Cylinder temperature control: double jacket Nameplate: Volume: 2,700 litres Double jacket volume: 10.0 litres Product-contact material: V2A 1.4301 (AISI304) Condition: used Cylindrical height: 1,250 mm Previous application: brewery VESSEL Number of feet: 4 pcs HEATING/COOLING JACKET Bottom temperature control: double jacket INSULATION Insulation jacket: hermetically welded Insulation material: stainless steel EQUIPMENT Manhole / dome: in cylinder Outlet: DN32 DIN 11851 MATERIAL SPECIFICATION Temperature control system material: V2A 1.4301 (AISI304) Foot material: stainless steel

Condition: used, tank capacity: 10,000 l, GENERAL INFORMATION Equipment: Level indicator (without guarantee) Credpfx Aboxqcpye Uja Design: vertical External diameter: 2,000 mm Internal diameter: 1,800 mm Total height: 5,200 mm Insulation: present Max. excess pressure: 5.00 bar Support type: height-adjustable feet Location: Bremen Technical documents: Drawing, TÜV certificates Nameplate: Volume: 10,000 liters Cylinder wall thickness: 5 mm Product-contacting material: V2A 1.4301 (AISI304) Condition: used Cylindrical height: 4,000 mm Previous use: Ice water tank in a dairy plant TANK Max. permitted operating temperature: 20 °C Number of feet: 4 pcs INSULATION Insulation jacket: hermetically welded Insulation jacket material: stainless steel EQUIPMENT Manhole / dome: in the cylinder Outlet: pipe end approx. Ø 40 mm Note: slight residues, outlet end cut off MATERIAL SPECIFICATION Feet material: stainless steel TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 7 mm

Year of construction: 2015, condition: used, tank capacity: 1,195 l, GENERAL Equipment: Level indicator (not guaranteed), spray head, lifting lugs Design: vertical Year of manufacture: 2015 External diameter: 1,200 mm Internal diameter: 1,000 mm Overall height: 2,340 mm Heating/Cooling: available Insulation: available Max. permissible operating temperature: 50 °C Max. permissible operating overpressure: 6.0 bar Max. overpressure: 3.00 bar Mounting type: on feet Location: Bremen Codexqcp Tjpfx Ab Uora Technical documentation: Drawing, TÜV certificates, CE marking and declaration of conformity, operating manual Cylinder temperature control: Thermoplate Nameplate: Capacity: 1,195 litres Double jacket volume: 2.0 litres Double jacket material: V2A 1.4301 (AISI 304) Product contact material: V2A 1.4301 (AISI 304) Condition: unused Cylindrical height: 1,250 mm VESSEL Max. permissible operating temperature: 50 °C Number of feet: 3 pcs INSULATION Insulation jacket: hermetically welded Insulation material: mineral wool Insulation jacket material: stainless steel Insulation thickness: 80 mm EQUIPMENT Manhole / Dome: in cylinder Outlet: DN40 DIN 11851 MATERIAL SPECIFICATION Internal surface: polished (high-gloss finish) Feet material: stainless steel

Condition: used, tank capacity: 500 l, GENERAL INFORMATION Construction type: upright Remarks: Slight variations in the design of the containers, e.g., 2 containers are mobile on castors, the rest are on fixed V2A frames; maximum pressure in some cases up to 3 bar; variations in the connections on the manhole cover; overall height is in part slightly lower (depending on the connections on the manhole cover) Inner diameter: 800 mm Total height: 1,780 mm Max. overpressure: 2.5 bar Support type: Frame Location: Bremen Nameplate: Volume: 500 liters Product-contact material: V4A 1.4435 (AISI316) Condition: Used Previous application: Pharmaceutical EQUIPMENT Manhole / Dome: on the top head (DN 400) Outlet: present Cjdpfx Asxqc Hreb Ujra MATERIAL SPECIFICATION External surface: ground Internal surface: ground

Condition: used, tank capacity: 2,500 l, GENERAL Equipment: Spray head, crane lugs Design: vertical Remarks: Foot ends cut off (see photos) Internal diameter: 1,190 mm Total height: 3,850 mm Csdpfxsyckfbo Ab Ujra Max. overpressure: 1.0 bar Agitator: propeller Location: Bremen Nameplate: Volume: 2,500 liters Cylinder wall thickness: 4 mm Product-contacting material: V4A 1.4401/04 (AISI316) Condition: used Cylindrical height: 2,500 mm Last application: cosmetics TANK Support type: feet Number of feet: 4 pcs EQUIPMENT Manhole / dome: in top head (DN 600) Outlet: 34 mm Note: Motor/gearbox missing, outlet end cut off MATERIAL SPECIFICATION Feet material: stainless steel AGITATOR Agitator arrangement: eccentric in top head TECHNICAL DATA / DIMENSIONS Head wall thickness: 5 mm

Condition: used, tank capacity: 92 l, GENERAL Design: suspended Outer diameter: 610 mm Inner diameter: 406 mm Total height: 1,100 mm Insulation: available Max. overpressure: 1.0 bar Location: Bremen Technical documentation: Drawing, test certificate Nameplate: Vacuum: 6.5 bar Volume: 92 liters Cylinder wall thickness: 4 mm Product-contact material: steel Condition: used Cylindrical height: 600 mm Last application: pharmaceutical chemistry TANK Max. allowed operating temperature: 200 °C Credpfx Aoyck Naeb Usa INSULATION Insulation jacket material: aluminum Insulation thickness: 100 mm EQUIPMENT Outlet: flange DN65 TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 4 mm

Year of construction: 2007, condition: used, tank capacity: 1,027 l, 1027 liter pressure vessel made of V2A stainless steel Cedpeyfwtqofx Ab Uera

Condition: used, tank capacity: 1,600 l, GENERAL Construction type: horizontal Remarks: 4 stainless steel feet, bolted to 4 stainless steel base plates; manhole DN 400; slight metallic discoloration inside; further technical documentation available External diameter: 1,060 mm Internal diameter: 900 mm Total height: 2,100 mm Total length: 2,700 mm Insulation: available Max. overpressure: 2.0 bar Mounting type: feet Location: Bremen Cedpexqc Ezefx Ab Ujra Technical documentation: drawing Nameplate: Vacuum: 1.0 bar Volume: 1,600 liters Cylinder wall thickness: 4 mm Product-contact material: V4A 1.4435 (AISI316) Condition: used Last application: pharmaceutical chemicals VESSEL Max. permissible operating temperature: 95°C Number of feet: 4 pcs INSULATION Insulation jacket: riveted Insulation jacket material: aluminum EQUIPMENT Manhole / dome: on the vessel Outlet: flange DN65 Note: dents on the insulation jacket, manhole cover missing MATERIAL QUALITY Feet material: stainless steel TECHNICAL DATA / MEASUREMENTS Bottom wall thickness: 4 mm

Condition: used, tank capacity: 130 l, GENERAL Design: vertical Remarks: Handhole diameter approx. 150 mm; immersion tubes inside the tanks; some minor dents Crsdpjxqc Nyjfx Ab Uja Internal diameter: 508 mm Total height: 1,000 mm Max. overpressure: 3.00 bar Location: Bremen Technical documentation: Drawing Nameplate: Vacuum: 1.00 bar Volume: 130 liters Cylinder wall thickness: 2.5 mm Product-contact material: V4A 1.4401/04 (AISI316) Condition: used Cylindrical height: 488 mm Previous application: pharmaceutical industry VESSEL Max. permissible operating temperature: 200°C EQUIPMENT Manway / Dome: handhole Outlet: not available TECHNICAL DATA / DIMENSIONS Head wall thickness: 2.5 mm

Condition: used, tank capacity: 10,500 l, GENERAL Features: Spray head, crane lugs Design: vertical Remarks: 1 stainless steel sheet inside at the bottom (see photos); Wall thickness of the lowest cylinder segment: 3 mm Internal diameter: 1,500 mm Total height: 6,800 mm Max. overpressure: 1.5 bar Support design: height-adjustable feet Location: Bremen Technical documentation: drawing, TÜV certificates, various documents Nameplate: Volume: 10,500 liters Cylinder wall thickness: 2.5 mm Product-contact material: V2A 1.4301 (AISI304) Condition: used Cylindrical height: 5,500 mm Previous use: brewery TANK Max. permissible operating temperature: 20 °C Number of feet: 3 pcs EQUIPMENT Manhole / dome: in cylinder (approx. 350 x 450 mm) Outlet: DN80 DIN 11851 Note: pressure marks on the cylinder Credpoxqcn Nofx Ab Uea MATERIAL SPECIFICATION Feet material: stainless steel TECHNICAL DATA / DIMENSIONS Wall thickness bottom: 2.5 mm Wall thickness top: 2.1 mm

Condition: used, tank capacity: 13,700 l, GENERAL Features: Disc valve, spray head, crane lugs Design: vertical Remarks: Cone height approx. 1,300 mm Internal diameter: 2,600 mm Total height: 4,650 mm Heating/cooling: available Max. allowable operating temperature: 2 °C Max. allowable operating overpressure: 3.0 bar Max. overpressure: 1.0 bar Support type: Height-adjustable feet Location: Bremen Technical documents: Drawing Cylinder tempering: Rectangular half-pipe coil Name plate: Volume: 13,700 liters Volume double jacket: 40.0 liters Wall thickness cylinder: 3 mm Product-contact material: V4A 1.4571 (AISI316) Condition: used Cylindrical height: 1,800 mm Previous application: Yeast tank in a brewery TANK Max. allowable operating temperature: 20 °C Bottom: Conical bottom Number of feet: 4 pcs EQUIPMENT Manhole / access hatch: on top (DN 400) Outlet: DN65 DIN 11851 MATERIAL SPECIFICATION Material tempering system: V2A 1.4301 (AISI304) Crjdoxqcptepfx Ab Uea Feet material: Stainless steel TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 4 mm

Condition: used, tank capacity: 1,175 l, GENERAL Equipment: Spray head, crane lugs Design: vertical Internal diameter: 1,000 mm Total height: 2,050 mm Heating/Cooling: available Max. permissible operating temperature: 50 °C Max. permissible operating overpressure: 3.0 bar Max. overpressure: 2.50 bar Support type: height-adjustable feet Location: Bremen Technical documentation: drawing Cylinder temperature control: Thermoplate Nameplate: Volume: 1,175 liters Double jacket volume: 7.0 liters Double jacket material: V2A 1.4301 (AISI 304) Product-contacting material: V2A 1.4301 (AISI 304) Condition: factory new Cylindrical height: 1,250 mm VESSEL Csdpsxqcqdsfx Ab Uera Max. permissible operating temperature: 50 °C Number of feet: 4 pcs HEATING/COOLING JACKET Bottom heating/cooling: Thermoplate EQUIPMENT Manhole / Access hatch: on cylinder Outlet: DN50 DIN 11851 MATERIAL SPECIFICATION Surface outside: ground/polished Surface inside: ground/polished Feet material: stainless steel

Condition: used, tank capacity: 1,235 l, GENERAL Design: Container Remarks: Pneumatic butterfly valve; welded piping inside the tank (see photos); cone height approx. 530 mm; minor differences in individual tank design possible Internal diameter: 1,200 mm Total height: 2,150 mm Max. overpressure: 0.5 bar Support type: Feet Location: Bremen Technical documentation: Drawing, various documents, operating manual Nameplate: Vacuum: 1.0 bar Volume: 1,235 liters Cylinder wall thickness: 4 mm Product-contact material: V2A 1.4301 (AISI304) Condition: used Cylindrical height: 660 mm Previous application: Pharmaceutical TANK Max. permissible operating temperature: 100 °C Lower head: Conical bottom Number of feet: 4 Csdpfxexqc Iio Ab Usra EQUIPMENT Manhole / Dome: in the top head (DN 400) Outlet: 250 mm MATERIAL SPECIFICATION Foot material: Stainless steel TECHNICAL DATA / DIMENSIONS Head wall thickness: 4 mm

Condition: used, tank capacity: 36,000 l, 36,400 liter heatable/coolable pressure vessel made of V2A stainless steel Credpfjyfwrasx Ab Uea

Year of construction: 2018, condition: used, tank capacity: 570 l, 570 liter heatable/coolable pressure vessel made of V2A stainless steel Cjdpfx Aeyfwryob Uora

Condition: used, tank capacity: 1,000 l, 1000 liter pressure vessel made of V2A stainless steel Cjdpfxeyfwtwj Ab Uera

Condition: used, tank capacity: 1,000 l, GENERAL INFORMATION Cedpoycix Tsfx Ab Usra Construction: upright Remarks: Manhole diameter approx. 420 mm Internal diameter: 1,190 mm Total height: 2,550 mm Max. overpressure: 2.0 bar Location: Bremen Nameplate: Vacuum: 1.0 bar Volume: 1,000 litres Product-contact material: V4A 1.4429 (AISI316) Condition: used Cylindrical height: 950 mm Previous use: biochemistry TANK Max. permissible operating temperature: 200 °C Stand type: feet Number of feet: 4 pcs EQUIPMENT Manhole / dome: in top head Outlet: 53 mm Note: slight residues, manhole cover plated MATERIAL SPECIFICATION Foot material: steel