Used Pressure Regulator for sale (16,505)

Condition: good (used), Control unit, control valve, hydraulic pressure regulator, pressure switch, PressureController -Manufacturer: Parker i, Hydraulic Pressure Controller Type SCPSD-250-14-152 -Pressure range: 250 bar Nksdok Aubiepfx Afzot -Accessories: including attachments, see photos -Total dimensions: 210/90/H50 mm -Weight: 0.7 kg

Condition: good (used), Pressure regulating directional valve, solenoid valve, pneumatic valve, air valve, pressure valve, valve block, control block Nkedpfsb S Htpex Afzot -Type: 5350210030 -Price: per piece -Quantity: 10 available -Weight: 0.2 kg

Condition: good (used), Pressure regulator intermediate plate -Manufacturer: Festo -Type: LR-ZP-AD-2 -From: 0 bar to: 12 bar -Number: 1x valve available -Price: per piece -Dimensions: 250/60/H55 mm Nedpfx Aect Nvijfzjkt -Weight: 1 kg

Condition: good (used), pressure monitor, pressure switch, pressure regulator, gas pressure regulator, dial air regulator -Manufacturer: Wilkerson, pressure regulator Dial-Air-Regulator -Type: R21-C4-L00 B -Control range: 0-3 bar / 0-40 psi Njdpfxjvy Enuj Afzekt -Inlet pressure: max. 21 bar / 300 psi -Dimensions: 81/68/H103 mm -Weight: 0.9 kg

Condition: used, Heating, gas and oil burners, gas burner control, gas relay, control box, burner control, burner management, pressure monitor, pressure switch, pressure regulator, gas pressure regulator -Manufacturer: Fisher, LPG pressure regulator series 912 unused OVP -Type: 912H-108 FS912H-108 Nedpfsubfxqox Afzskt -Control range: 0.5-2.5 psi / 3.4-17.2 kPa -p max.: 250 psi / 17,2 bar -Number: 5x pressure regulators available -Price: per piece -Carton dimensions: 90/85/H75 mm -Weight: 0.5 kg/piece

Condition: used, Heating, gas and oil burners, gas burner control, gas relay, control box, burner control, burner management, pressure monitor, pressure switch, pressure regulator, gas pressure regulator -Manufacturer: Fisher, LPG pressure regulator series 912 -Type: 912H-108 -Control range: 0.5-2.7 psi -p max.: 250 psi / 17.2 bar Nkedpfx Afjuxg Nzezjt -Dimensions total: 165/70/H85 mm -Weight: 0.5 kg

Condition: used, heating, gas and oil burner, automatic burner control, gas relay, control box, burner control, burner management, pressure monitor, pressure switch, pressure regulator, gas pressure regulator Nkjdpfsghtpbex Afzet -Manufacturer: Kromschroder, gas pressure regulator unused OVP -Type: GDJ15R04-0 -p max.: 400 mbar -Dimension box: 110/130/H100 mm -Weight: 0.6 kg

Condition: good (used), Pressure regulator intermediate plate -Type: LR-ZP-A/B-D2 35428 -From: 0 bar to: 12 bar -Price: per piece -Quantity: 8x Available Njdpfx Aob A Ixnefzekt -Weight: 2 kg

Condition: good (used), Year of construction: 1992, functionality: fully functional, cutting height (max.): 130 mm, cutting length (max.): 400 mm, overall weight: 1,400 kg, Monitored saw blade cover; Nksdpfx Afjxnzf Uozst cuts at 90° profile height 130 mm and profile width 400 mm, at 45° = 130 x 280 mm at 30° = 130 x 195 mm. Acute angle cutting at 30° right and left. - hydraulic material clamping vertically and horizontally - hydraulic stepless saw feed - clamping pressure adjustment - original Trennjaeger stops are available. .

Condition: good (used), Mixing Tank, Mixer, Pressure Vessel, Heating Jacket, Chemical Industry, Used Equipment Design: Cylindrical tank with shallow dished bottom and top, equipped with an agitator. The tank bottom and shell are double-walled with a heating jacket. The tank lid is removable with a flanged bolt connection. The lid has a cleaning opening. Material Quality: Carbon steel with painted surface. Manufacturer: Robert Hinkel & Co Type: 9601 Volume: 200L Njdpetrdyrofx Afzskt Operating Pressure: 3 bar Electrical Data: 380V; 0.75kW; 2.0A

Year of construction: 2020, condition: new, PLC microprocessor control • HMI operator panel • Phases changed manually or automatically - temporarily • Two separate circuits for water and chemistry, closed circuit • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible The control box is made of IP54 technology User manual, Declaration of conformity, 12 months warranty. Nodpfxsfz Dvvj Afzjkt ROMER pressure washers use metal sheet that provides protection against chemicals. The washer walls protect against splashing, thanks to the closed chemistry loop, the process can be carried out with small amounts of chemistry. Due to the small amount of refrigerant required, it is easy to heat and cheaper to buy, it also allows you to wash large dimensions impossible to wash in bath tubs. Filtration system Thanks to the filtration system, the chemistry works in a closed circuit, 3 filters of different thickness are used, which prevent garbage and grease from entering the circulation. The chemistry is stored in heated stainless steel tanks from where it is fed by a pump under pressure to the lance Washing of dimensions The pressure washer allows washing of large elements, optionally has a rotating platform that allows rotation of the cleaned element, elements can be applied to it with a forklift or crane. High pressure pumps The car wash has two preparation phases, both treatments have separate sets of pipes, pumps, wires and guns to minimize mixing of these agents during phase change. Drains have separate valves that manage the return of funds. The carwash is equipped with a logic controller that controls all components. The chemistry is pumped up to 20 bar using a very durable, acid-resistant AISI304 pump with several stages, 3 kW. The rinsing phase uses a high pressure piston pump with ceramic pistons with a capacity of 3kW and provides 160 - 200 bar.

Year of construction: 2020, condition: new, PLC microprocessor control Nkodpfx Afefz Ax Sjzot • HMI operator panel • Phases changed manually or automatically - temporarily • Two separate circuits for water and chemistry, closed circuit • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible The control box is made of IP54 technology User manual, Declaration of conformity, 12 months warranty. ROMER pressure washers use metal sheet that provides protection against chemicals. The washer walls protect against splashing, thanks to the closed chemistry loop, the process can be carried out with small amounts of chemistry. Due to the small amount of refrigerant required, it is easy to heat and cheaper to buy, it also allows you to wash large dimensions impossible to wash in bath tubs. Filtration system Thanks to the filtration system, the chemistry works in a closed circuit, 3 filters of different thickness are used, which prevent garbage and grease from entering the circulation. The chemistry is stored in heated stainless steel tanks from where it is fed by a pump under pressure to the lance Washing of dimensions The pressure washer allows washing of large elements, optionally has a rotating platform that allows rotation of the cleaned element, elements can be applied to it with a forklift or crane. High pressure pumps The car wash has two preparation phases, both treatments have separate sets of pipes, pumps, wires and guns to minimize mixing of these agents during phase change. Drains have separate valves that manage the return of funds. The carwash is equipped with a logic controller that controls all components. The chemistry is pumped up to 20 bar using a very durable, acid-resistant AISI304 pump with several stages, 3 kW. The rinsing phase uses a high pressure piston pump with ceramic pistons with a capacity of 3kW and provides 160 - 200 bar.

Year of construction: 2020, condition: new, PLC microprocessor control • HMI operator panel • Phases changed manually or automatically - temporarily • Two separate circuits for water and chemistry, closed circuit • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible The control box is made of IP54 technology User manual, Declaration of conformity, 12 months warranty. ROMER pressure washers use metal sheet that provides protection against chemicals. The washer walls protect against splashing, thanks to the closed chemistry loop, the process can be carried out with small amounts of chemistry. Due to the small amount of refrigerant required, it is easy to heat and cheaper to buy, it also allows you to wash large dimensions impossible to wash in bath tubs. Filtration system Thanks to the filtration system, the chemistry works in a closed circuit, 3 filters of different thickness are used, which prevent garbage and grease from entering the circulation. The chemistry is stored in heated stainless steel tanks from where it is fed by a pump under pressure to the lance Washing of dimensions The pressure washer allows washing of large elements, optionally has a rotating platform that allows rotation of the cleaned element, elements can be applied to it with a forklift or crane. Njdjflpmqjpfx Afzjkt High pressure pumps The car wash has two preparation phases, both treatments have separate sets of pipes, pumps, wires and guns to minimize mixing of these agents during phase change. Drains have separate valves that manage the return of funds. The carwash is equipped with a logic controller that controls all components. The chemistry is pumped up to 20 bar using a very durable, acid-resistant AISI304 pump with several stages, 3 kW. The rinsing phase uses a high pressure piston pump with ceramic pistons with a capacity of 3kW and provides 160 - 200 bar.

Year of construction: 2020, condition: new, PLC microprocessor control • HMI operator panel • Phases changed manually or automatically - temporarily • Two separate circuits for water and chemistry, closed circuit • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible The control box is made of IP54 technology User manual, Declaration of conformity, 12 months warranty. Njdpfxsfzraps Afzokt ROMER pressure washers use metal sheet that provides protection against chemicals. The washer walls protect against splashing, thanks to the closed chemistry loop, the process can be carried out with small amounts of chemistry. Due to the small amount of refrigerant required, it is easy to heat and cheaper to buy, it also allows you to wash large dimensions impossible to wash in bath tubs. Filtration system Thanks to the filtration system, the chemistry works in a closed circuit, 3 filters of different thickness are used, which prevent garbage and grease from entering the circulation. The chemistry is stored in heated stainless steel tanks from where it is fed by a pump under pressure to the lance Washing of dimensions The pressure washer allows washing of large elements, optionally has a rotating platform that allows rotation of the cleaned element, elements can be applied to it with a forklift or crane. High pressure pumps The car wash has two preparation phases, both treatments have separate sets of pipes, pumps, wires and guns to minimize mixing of these agents during phase change. Drains have separate valves that manage the return of funds. The carwash is equipped with a logic controller that controls all components. The chemistry is pumped up to 20 bar using a very durable, acid-resistant AISI304 pump with several stages, 3 kW. The rinsing phase uses a high pressure piston pump with ceramic pistons with a capacity of 3kW and provides 160 - 200 bar.

Year of construction: 2020, condition: new, PLC microprocessor control • HMI operator panel • Phases changed manually or automatically - temporarily • Two separate circuits for water and chemistry, closed circuit • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible The control box is made of IP54 technology User manual, Declaration of conformity, 12 months warranty. ROMER pressure washers use metal sheet that provides protection against chemicals. The washer walls protect against splashing, thanks to the closed chemistry loop, the process can be carried out with small amounts of chemistry. Due to the small amount of refrigerant required, it is easy to heat and cheaper to buy, it also allows you to wash large dimensions impossible to wash in bath tubs. Filtration system Thanks to the filtration system, the chemistry works in a closed circuit, 3 filters of different thickness are used, which prevent garbage and grease from entering the circulation. The chemistry is stored in heated stainless steel tanks from where it is fed by a pump under pressure to the lance Washing of dimensions The pressure washer allows washing of large elements, optionally has a rotating platform that allows rotation of the cleaned element, elements can be applied to it with a forklift or crane. High pressure pumps Nedpfx Aefz A D Nofzekt The car wash has two preparation phases, both treatments have separate sets of pipes, pumps, wires and guns to minimize mixing of these agents during phase change. Drains have separate valves that manage the return of funds. The carwash is equipped with a logic controller that controls all components. The chemistry is pumped up to 20 bar using a very durable, acid-resistant AISI304 pump with several stages, 3 kW. The rinsing phase uses a high pressure piston pump with ceramic pistons with a capacity of 3kW and provides 160 - 200 bar.

Condition: used, Used Schenk model ZHF-S70-Z-C3 stainless steel pressure leaf filter. Unit measures approximately 2400mm straight side X 1350mm diameter. Has (60) 1200mm diameter horizontal filter/scavenge elements on 30mm spacing. Total approximately 70 square meter filtration area with approximately 1850 litre cake capacity. Filter elements bottom driven by a Hydrokraft model PVG 130-ES/11 hydraulic drive with a 37 kW, 415 volt, 1400 rpm, 3 phase, 50 HZ motor. Unit has an approximately 200mm slurry outlet. Welded dished bottom and clamped dished top head. Approximately 4300 litre capacity rated 9 bar design pressure at 20°C. Material of construction 321/304 stainless steel. Mounted on (3) legs. Also includes a 3000 litre 304 stainless steel Kieselguhr discharge tank rated 0.5 bar at 20°C. And a Kieselguhr Dosing tank with a 2-tier 2-blade pitched paddle type agitator driven by a 1.1 kW motor. Dosing tank includes feed pump driven by a 1.4/1.8 kW, 415 volt, 1410/2870 rpm, 3 phase variable speed motor. Nsdsyanvrspfx Afzekt

Condition: used, tank capacity: 313 l, GENERAL Design: upright Notes: 3-legged frame, steel (painted; 1 leg shortened); clamp screws steel (with signs of corrosion) Internal diameter: 700 mm Total height: 3,050 mm Heating/Cooling: present Power: 4 kW Max. allowable operating overpressure: 10.0 bar Max. overpressure: 3.00 bar Top cover: removable / liftable top cover Agitator: anchor agitator Location: Bremen Cylinder temperature control: half-pipe coil Nameplate: Volume: 313 liters Jacket volume: 90.0 liters Jacket material: V2A 1.4301 (AISI 304) Product-contact material: V4A 1.4439 (AISI 316) Condition: used Cylindrical height: 630 mm Previous use: chemicals VESSEL Support type: frame HEATING/COOLING JACKET Bottom temperature control: half-pipe coil EQUIPMENT Manhole / Dome: handhole Outlet: present Note: slight residues AGITATOR Voltage Volts: 220/380 Volts Agitator arrangement: centrally mounted on the top cover Nkjdpfxexqbbhs Afzet

Condition: used, tank capacity: 630 l, GENERAL Design: suspended Remarks: Support ring and vessel flange made of Fe; handhole cover plated Internal diameter: 1,000 mm Total height: 2,000 mm Heating/cooling: available Max. admissible operating temperature: 300 °C Max. admissible operating overpressure: 32.0 bar Max. overpressure: 6.00 bar Top cover: removable / hinged top cover Agitator: anchor agitator Location: Bremen Cylinder temperature control: half-pipe coil Nameplate: Vacuum: 1.00 bar Volume: 630 liters Jacket volume: 14.5 liters Cylinder wall thickness: 7.8 mm Jacket material: V4A 1.4571 (AISI316) Product-contact material: V4A 1.4571 (AISI316) Nkjdpsxqba Dsfx Afzst Condition: used Cylindrical height: 800 mm Previous application: chemical industry VESSEL Max. admissible operating temperature: 300 °C Stand type: ring HEATING/COOLING JACKET Bottom temperature control: half-pipe coil EQUIPMENT Manhole/Dome: handhole Outlet: flange DN50 AGITATOR Agitator arrangement: centrally mounted on top cover Agitator equipment: motor/gear unit missing TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 15.3 mm Top cover wall thickness: 15.8 mm

Condition: used, tank capacity: 1,150 l, GENERAL Equipment: Crane lugs Design: hanging Remarks: Halar coating inside (very good resistance to acids, alkalis, and solvents); no nameplate available; several connections have been modified by the previous operator, including one new outlet that was welded in (no coating in the weld area of the bottom plate and in the new outlet itself; no coating on the manway cover either); 5-legged frame made of Fe (galvanized; one leg slightly bent) Outer diameter: 1,250 mm Inner diameter: 1,100 mm Overall width: 1,660 mm Overall height: 2,600 mm Overall length: 1,850 mm Heating/cooling: available Insulation: available Max. overpressure: 0.60 bar Top head: bolted cover Agitator: agitator flange Location: Bremen Technical documentation: drawing Cylinder temperature control: half-pipe coil Vacuum: 1.00 bar Volume: 1,150 liters Cylinder wall thickness: 4.0 mm Jacket material: V4A 1.4571 (AISI316) Product contact material: Halar E-CTFE coating Condition: used Cylindrical height: 870 mm Nsdpfx Asxqbaksfzokt Previous application: gasoline TANK Max. permissible operating temperature: 120 °C Support style: frame HEATING/COOLING JACKET Bottom temperature control: half-pipe coil INSULATION Insulation shell: bolted Insulation shell material: aluminum EQUIPMENT Manhole / dome: on top head (DN 400) Outlet: flange DN100 Note: minor residues, dents on insulation shell MATERIAL SPECIFICATION Head material: AISI316 (V4A) 1.4571 Cylinder material: AISI316 (V4A) 1.4571 AGITATOR Agitator arrangement: eccentric in top head TECHNICAL DATA / DIMENSIONS Head wall thickness: 4.0 mm

Condition: used, tank capacity: 720 l, GENERAL Equipment: crane lugs Design: suspended Remarks: 3 feet made of Fe; bolts for the top flange mostly missing Internal diameter: 790 mm Total height: 2,250 mm Heating/cooling: present Nsdpfx Ajxqa U Hefzekt Max. permissible operating temperature: 200 °C Max. permissible operating overpressure: 6.0 bar Max. overpressure: 2.00 bar Top closure: bolted lid Agitator: beam agitator Location: Bremen Cylinder jacket temperature control: half-pipe coil Nameplate: Volume: 720 liters Double jacket volume: 52.0 liters Cylinder wall thickness: 6.2 mm Double jacket material: V4A 1.4401 (AISI316) Product-contacting material: V4A 1.4571 (AISI316) Condition: used Cylindrical height: 1,220 mm Last application: chemicals VESSEL Max. permissible operating temperature: 150 °C Support type: feet HEATING/COOLING JACKET Bottom temperature control: half-pipe coil EQUIPMENT Outlet: available Note: motor/gearbox missing AGITATOR Baffle: Agitator arrangement: centrally mounted on top cover TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 5.9 mm Top cover wall thickness: 8.2 mm

Condition: used, tank capacity: 1,333 l, GENERAL Nksdpfxjxqa Uge Afzot Design: vertical Notes: Handhole DN 200 Speed: 49 rpm External diameter: 1,250 mm Internal diameter: 1,188 mm Total height: 2,850 mm Heating/Cooling: equipped Power: 0.75 kW Max. permissible operating temperature: 143 °C Max. permissible operating overpressure: 3.0 bar Max. overpressure: 3.00 bar Top cover: removable/top-hinged Agitator: beam agitator Location: Bremen Technical documentation: drawing of a similar vessel Cylinder temperature control: double jacket Nameplate: Vacuum: 1.00 bar Volume: 1,333 liters Double jacket volume: 100.0 liters Double jacket material: V2A 1.4301 (AISI304) Product-contacting material: V4A 1.4571 (AISI316) Condition: used Previous application: pharmaceutical VESSEL Max. permissible operating temperature: 143 °C Base design: height-adjustable feet Number of feet: 3 HEATING/COOLING JACKET Bottom temperature control: double jacket EQUIPMENT Manhole / Dome: handhole Outlet: available Note: slight residues/adhesions MATERIAL SPECIFICATION Feet material: stainless steel AGITATOR Voltage: 220/380 Volts Agitator arrangement: centrally in the top cover

Condition: used, tank capacity: 2,130 l, GENERAL Equipment: spray head, crane lugs Design: vertical Remarks: Total height including base platforms and motor cover; double outlet pipe inner diameter approx. 35 mm; insulation jacket with minor damage; one crack at the upper double jacket connection Speed: 201 rpm External diameter: 1,500 mm Internal diameter: 1,260 mm Total height: 4,050 mm Heating/cooling: available Insulation: available Power: 4 kW Max. permissible operating temperature: 140°C Max. permissible operating overpressure: 4.0 bar Max. overpressure: 3.00 bar Agitator: inclined blade agitator Location: Bremen Cylinder temperature control: double jacket Nameplate: Vacuum: 1.00 bar Volume: 2,130 liters Double jacket volume: 400.0 liters Product contact material: V4A 1.4401/04 (AISI316) Condition: used Last intended use: pharmaceutical VESSEL Max. permissible operating temperature: 140°C Support type: feet HEATING/COOLING JACKET Bottom temperature control: double jacket INSULATION Nsdpfx Afjxqa Uajzskt Insulation jacket: hermetically welded Insulation jacket material: stainless steel EQUIPMENT Manhole / dome: in top head (Ø 450 mm) Outlet: available MATERIAL CHARACTERISTICS Inner surface: ground Temperature control system material: V2A 1.4301 (AISI304) Foot material: stainless steel AGITATOR Voltage: 230/400 V Agitator arrangement: centrally mounted on top head

Condition: used, tank capacity: 650 l, GENERAL INFORMATION Equipment: Spray head Design: upright Remarks: Metallic discoloration on the inside Speed: 1415 rpm Outer diameter: 1,040 mm Inner diameter: 900 mm Explosion protection: Motor is explosion-proof (compliance with applicable ATEX regulations under local conditions must be verified) Total height: 2,380 mm Heating/Cooling: present Insulation: present Power: 1 kW Max. permissible operating temperature: 170 °C Max. permissible operating overpressure: 8.0 bar Max. overpressure: 1.50 bar Agitator: Propeller Location: Bremen Technical documentation: Drawing, acceptance certificate Cylinder temperature control: Half-pipe coil Nameplate: Volume: 650 liters Cylinder wall thickness: 6.0 mm Double jacket material: V2A 1.4301 (AISI304) Product contact material: V2A 1.4301 (AISI304) Condition: used Cylindrical height: 900 mm Nkodpoxqa T Nefx Afzet Previous application: Pharmaceuticals VESSEL Max. permissible operating temperature: 170 °C Base design: on feet Number of feet: 4 HEATING/COOLING JACKET Bottom temperature control: Half-pipe coil INSULATION Insulation jacket: hermetically welded Insulation jacket material: stainless steel FITTINGS Manhole / dome: in the top lid (DN 400) Discharge outlet: 25 mm MATERIAL SPECIFICATION Feet material: stainless steel AGITATOR Voltage: 220/380 Volt Agitator position: eccentric, in top lid TECHNICAL DATA / DIMENSIONS Base wall thickness: 5.0 mm

Condition: used, tank capacity: 265 l, GENERAL INFORMATION Design: vertical Remarks: Cone height approx. 1200 mm; handhole approx. 220 x 315 mm; handhole collar and handhole cover made of Fe; one vessel is missing the handhole cover; handhole cover fastenings are incomplete on the other vessels Speed: 90 - 546 rpm Explosion-proof: Motor is explosion-proof (compliance with applicable ATEX regulations under local conditions must be verified) Total height: 3,350 mm Heating/cooling: available Power: 1.5 kW Max. permissible operating temperature: 100 °C Max. permissible operating overpressure: 0.49 bar Max. overpressure: 20.5 bar Agitator: propeller Location: Bremen Nameplate: Volume: 265 liters Double jacket volume: 25.0 liters Double jacket material: V2A 1.4301 (AISI304) Product-contact material: V2A 1.4301 (AISI304) Condition: used Last application: steel alloys VESSEL Max. permissible operating temperature: 100 °C Lower head: conical bottom Support type: on feet Number of feet: 4 pcs HEATING/COOLING JACKET Lower head temperature control: double jacket EQUIPMENT Manhole/dome: handhole Outlet: available Note: slight residues MATERIAL SPECIFICATION Feet material: steel AGITATOR Njdpfx Afjxqa T Aezjkt Voltage: 290/500 V Agitator arrangement: eccentric in upper head Agitator equipment: 1 agitator 59 - 363 rpm

Condition: used, tank capacity: 280 l, GENERAL Design: vertical Remarks: No warranty on the functionality of the jacket and agitator (not tested) Outer diameter: 780 mm Inner diameter: 600 mm Heating/cooling: available Insulation: available Max. overpressure: 2.5 bar Agitator: disc agitator Agitators: 1 agitator Location: external storage Volume: 280 litres Product contact material: V2A 1.4301 (AISI304) Condition: used Cylindrical height: 1,000 mm VESSEL Bottoms: Klöpper bottom Mounting type: height-adjustable feet Number of feet: 3 pieces EQUIPMENT Nkodpfexqa Tvex Afzot Outlet: 32 mm MATERIAL PROPERTIES Feet material: stainless steel