Used Pressure Relief Valve for sale (19,444)

Condition: used, Line regulating valve, shut-off valve, ball shut-off valve, ball valve, ball valve, pressure relief valve -Manufacturer: Superior, pressure relief valve, unused original packaging Nwsdpjfyh Dpefx Af Ieb -Type: 3220-360/360 PSI -Dimension box: 105/50/H50 mm -Weight: 0.3 kg

Condition: good (used), Pressure control valve, pressure control directional control valves -Manufacturer: Festo -Type: MS4-LRB-1/4-D6-A8-AS -Operating pressure: 0-10 bar Nwjdpfx Afjcqvprs Iob -Number: 1x valves available -Price: per piece -Dimensions: 130/60/H40 mm -Weight: 0.22 kg

Condition: good (used), Pressure regulating directional valve, solenoid valve, pneumatic valve, air valve, pressure valve, valve block, control block -Type: 5350210030 -Price: per piece -Quantity: 10 available Nwedpfx Afsb S Htpj Ieb -Weight: 0.2 kg

Condition: good (used), Balancing valve, shut-off valve, pressure relief valve, shut-off valve, safety shut-off valve, safety relief valve, pressure monitor, pressure switch, pressure regulator, gas pressure regulator -Manufacturer: Dungs, safety relief valve -Type: FRSBV 1010 -Connection: DN 25 Nwodpog St I Tjfx Af Ieb -Dimensions: Ø143 x 190 mm -Weight: 1.2 kg

Condition: used, Proportional pressure regulating directional valves, solenoid valve, pneumatic valve, air valve, pressure valve, valve block, control block Njdpfx Aeb Nfc Rof Iewb -Operating pressure: 0-6 bar -Number: 2x valves available -Price: per piece -Dimensions: 110/45/H55 mm -Weight: 0.4 kg

Condition: used, Screw compressor, compressor, compressed air unit, stationary compressed air compressor, screw compressor, suction regulator relief valve, relief valve Nwjdpfoppdhnjx Af Ieb -Manufacturer: Boge, screw compressor intake regulator relief valve from compressor type SL 270 -Type: 644 0041 01 -Pressure: 0.5 - 10 bar bar -Dimensions: 195/100/H140 mm -Weight: 2.0 kg

Condition: used, Line regulating valve, shut-off valve, pressure relief valve, shut-off valve, safety shut-off valve, safety relief valve, pressure monitor, pressure switch, pressure regulator, gas pressure regulator -Manufacturer: ltron, safety relief valve -Type: 275-D -PN: 16 bar -Connection: DN G 1 " -Quantity: 2 pieces Nwjdpog St Nqjfx Af Isb -Price per piece -Dimension: Ø190 x 205 mm -Weight: 5.7 kg / piece

Condition: good (used), Proportional pressure control directional control valves, solenoid valves, pneumatic valves, air valves, pressure valves, valve blocks, control blocks Nsdpfjb A R Hpjx Af Ijwb -Operating pressure: 8 bar 120 psi -Dimensions: 200/85/H75 mm -Weight: 2 kg

Condition: good (used), Proportional pressure control directional valve, solenoid valve, pneumatic valve, air valve, pressure valve, valve block, control block -Operating pressure: 8 bar 120 psi Nedpfx Aeb A Sf Eef Iswb -Dimensions: 200/85/H75 mm -Weight: 2 kg

Condition: good (used), Proportional pressure control directional control valves, solenoid valves, pneumatic valves, air valves, pressure valves, valve blocks, control blocks Nwedpfxeb A Simo Af Iob -Operating pressure: 8 bar 120 psi -Dimensions: 200/85/H75 mm Price: per piece -Quantity: 2 available -Weight: 2 kg/piece

Condition: excellent (used), Pressure valve, pressure gauge, pressure indicator, manometer -Measuring range: 0-6 bar -Fitting: Ø 63 mm -Thread: M12/1.5 mm Nwjdpfxeb A Nhae Af Ieb -Price: per piece -Quantity: 10 available -Weight: 0.2 kg

Condition: refurbished (used), Refurbished and pressure tested. Lot of 45 flanged safety relief valves, spring loaded. Pressure ratings between 0.5 - 9 Bar. Nwedev Dw R Nspfx Af Ijb

Condition: used, This listing is for the Spectrum Labs Krosflo Research 11 TFF System Nwodpfx Ajxv Axxof Isb The unit is in full working condition and is ready for immediate use The KrosFlo® Research II TFF System by Spectrum Laboratories is a laboratory-scale filtration system designed for microfiltration and ultrafiltration applications. It is particularly suited for research and development processes involving volumes ranging from 2 mL to 15 L. The system is ideal for biotechnology, pharmaceuticals, and academic research laboratories where precise and controlled filtration processes are required.

Condition: good (used), Mixing Tank, Mixer, Pressure Vessel, Heating Jacket, Chemical Industry, Used Equipment Design: Cylindrical tank with shallow dished bottom and top, equipped with an agitator. The tank bottom and shell are double-walled with a heating jacket. The tank lid is removable with a flanged bolt connection. The lid has a cleaning opening. Material Quality: Carbon steel with painted surface. Njdpotrdyrofx Af Iswb Manufacturer: Robert Hinkel & Co Type: 9601 Volume: 200L Operating Pressure: 3 bar Electrical Data: 380V; 0.75kW; 2.0A

Year of construction: 2020, condition: new, PLC microprocessor control • HMI operator panel • Phases changed manually or automatically - temporarily • Two separate circuits for water and chemistry, closed circuit • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible The control box is made of IP54 technology User manual, Declaration of conformity, 12 months warranty. Nwjdpfx Aefz Dvvef Ieb ROMER pressure washers use metal sheet that provides protection against chemicals. The washer walls protect against splashing, thanks to the closed chemistry loop, the process can be carried out with small amounts of chemistry. Due to the small amount of refrigerant required, it is easy to heat and cheaper to buy, it also allows you to wash large dimensions impossible to wash in bath tubs. Filtration system Thanks to the filtration system, the chemistry works in a closed circuit, 3 filters of different thickness are used, which prevent garbage and grease from entering the circulation. The chemistry is stored in heated stainless steel tanks from where it is fed by a pump under pressure to the lance Washing of dimensions The pressure washer allows washing of large elements, optionally has a rotating platform that allows rotation of the cleaned element, elements can be applied to it with a forklift or crane. High pressure pumps The car wash has two preparation phases, both treatments have separate sets of pipes, pumps, wires and guns to minimize mixing of these agents during phase change. Drains have separate valves that manage the return of funds. The carwash is equipped with a logic controller that controls all components. The chemistry is pumped up to 20 bar using a very durable, acid-resistant AISI304 pump with several stages, 3 kW. The rinsing phase uses a high pressure piston pump with ceramic pistons with a capacity of 3kW and provides 160 - 200 bar.

Year of construction: 2020, condition: new, PLC microprocessor control • HMI operator panel • Phases changed manually or automatically - temporarily • Two separate circuits for water and chemistry, closed circuit • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible The control box is made of IP54 technology User manual, Declaration of conformity, 12 months warranty. ROMER pressure washers use metal sheet that provides protection against chemicals. The washer walls protect against splashing, thanks to the closed chemistry loop, the process can be carried out with small amounts of chemistry. Due to the small amount of refrigerant required, it is easy to heat and cheaper to buy, it also allows you to wash large dimensions impossible to wash in bath tubs. Filtration system Thanks to the filtration system, the chemistry works in a closed circuit, 3 filters of different thickness are used, which prevent garbage and grease from entering the circulation. The chemistry is stored in heated stainless steel tanks from where it is fed by a pump under pressure to the lance Nodpjfz Ax Sjfx Af Iewb Washing of dimensions The pressure washer allows washing of large elements, optionally has a rotating platform that allows rotation of the cleaned element, elements can be applied to it with a forklift or crane. High pressure pumps The car wash has two preparation phases, both treatments have separate sets of pipes, pumps, wires and guns to minimize mixing of these agents during phase change. Drains have separate valves that manage the return of funds. The carwash is equipped with a logic controller that controls all components. The chemistry is pumped up to 20 bar using a very durable, acid-resistant AISI304 pump with several stages, 3 kW. The rinsing phase uses a high pressure piston pump with ceramic pistons with a capacity of 3kW and provides 160 - 200 bar.

Year of construction: 2020, condition: new, PLC microprocessor control • HMI operator panel • Phases changed manually or automatically - temporarily • Two separate circuits for water and chemistry, closed circuit Nedpfsflpmqjx Af Iswb • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible The control box is made of IP54 technology User manual, Declaration of conformity, 12 months warranty. ROMER pressure washers use metal sheet that provides protection against chemicals. The washer walls protect against splashing, thanks to the closed chemistry loop, the process can be carried out with small amounts of chemistry. Due to the small amount of refrigerant required, it is easy to heat and cheaper to buy, it also allows you to wash large dimensions impossible to wash in bath tubs. Filtration system Thanks to the filtration system, the chemistry works in a closed circuit, 3 filters of different thickness are used, which prevent garbage and grease from entering the circulation. The chemistry is stored in heated stainless steel tanks from where it is fed by a pump under pressure to the lance Washing of dimensions The pressure washer allows washing of large elements, optionally has a rotating platform that allows rotation of the cleaned element, elements can be applied to it with a forklift or crane. High pressure pumps The car wash has two preparation phases, both treatments have separate sets of pipes, pumps, wires and guns to minimize mixing of these agents during phase change. Drains have separate valves that manage the return of funds. The carwash is equipped with a logic controller that controls all components. The chemistry is pumped up to 20 bar using a very durable, acid-resistant AISI304 pump with several stages, 3 kW. The rinsing phase uses a high pressure piston pump with ceramic pistons with a capacity of 3kW and provides 160 - 200 bar.

Year of construction: 2020, condition: new, PLC microprocessor control • HMI operator panel Nwjdpofzrapofx Af Ijb • Phases changed manually or automatically - temporarily • Two separate circuits for water and chemistry, closed circuit • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible The control box is made of IP54 technology User manual, Declaration of conformity, 12 months warranty. ROMER pressure washers use metal sheet that provides protection against chemicals. The washer walls protect against splashing, thanks to the closed chemistry loop, the process can be carried out with small amounts of chemistry. Due to the small amount of refrigerant required, it is easy to heat and cheaper to buy, it also allows you to wash large dimensions impossible to wash in bath tubs. Filtration system Thanks to the filtration system, the chemistry works in a closed circuit, 3 filters of different thickness are used, which prevent garbage and grease from entering the circulation. The chemistry is stored in heated stainless steel tanks from where it is fed by a pump under pressure to the lance Washing of dimensions The pressure washer allows washing of large elements, optionally has a rotating platform that allows rotation of the cleaned element, elements can be applied to it with a forklift or crane. High pressure pumps The car wash has two preparation phases, both treatments have separate sets of pipes, pumps, wires and guns to minimize mixing of these agents during phase change. Drains have separate valves that manage the return of funds. The carwash is equipped with a logic controller that controls all components. The chemistry is pumped up to 20 bar using a very durable, acid-resistant AISI304 pump with several stages, 3 kW. The rinsing phase uses a high pressure piston pump with ceramic pistons with a capacity of 3kW and provides 160 - 200 bar.

Year of construction: 2020, condition: new, PLC microprocessor control • HMI operator panel • Phases changed manually or automatically - temporarily • Two separate circuits for water and chemistry, closed circuit • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible The control box is made of IP54 technology User manual, Declaration of conformity, 12 months warranty. ROMER pressure washers use metal sheet that provides protection against chemicals. The washer walls protect against splashing, thanks to the closed chemistry loop, the process can be carried out with small amounts of chemistry. Due to the small amount of refrigerant required, it is easy to heat and cheaper to buy, it also allows you to wash large dimensions impossible to wash in bath tubs. Filtration system Thanks to the filtration system, the chemistry works in a closed circuit, 3 filters of different thickness are used, which prevent garbage and grease from entering the circulation. The chemistry is stored in heated stainless steel tanks from where it is fed by a pump under pressure to the lance Washing of dimensions The pressure washer allows washing of large elements, optionally has a rotating platform that allows rotation of the cleaned element, elements can be applied to it with a forklift or crane. High pressure pumps Nedofz A D Nopfx Af Iswb The car wash has two preparation phases, both treatments have separate sets of pipes, pumps, wires and guns to minimize mixing of these agents during phase change. Drains have separate valves that manage the return of funds. The carwash is equipped with a logic controller that controls all components. The chemistry is pumped up to 20 bar using a very durable, acid-resistant AISI304 pump with several stages, 3 kW. The rinsing phase uses a high pressure piston pump with ceramic pistons with a capacity of 3kW and provides 160 - 200 bar.

Condition: used, Used Schenk model ZHF-S70-Z-C3 stainless steel pressure leaf filter. Unit measures approximately 2400mm straight side X 1350mm diameter. Has (60) 1200mm diameter horizontal filter/scavenge elements on 30mm spacing. Total approximately 70 square meter filtration area with approximately 1850 litre cake capacity. Filter elements bottom driven by a Hydrokraft model PVG 130-ES/11 hydraulic drive with a 37 kW, 415 volt, 1400 rpm, 3 phase, 50 HZ motor. Unit has an approximately 200mm slurry outlet. Welded dished bottom and clamped dished top head. Approximately 4300 litre capacity rated 9 bar design pressure at 20°C. Material of construction 321/304 stainless steel. Mounted on (3) legs. Also includes a 3000 litre 304 stainless steel Kieselguhr discharge tank rated 0.5 bar at 20°C. And a Kieselguhr Dosing tank with a 2-tier 2-blade pitched paddle type agitator driven by a 1.1 kW motor. Dosing tank includes feed pump driven by a 1.4/1.8 kW, 415 volt, 1410/2870 rpm, 3 phase variable speed motor. Nwodjyanvrepfx Af Ieb

Condition: used, tank capacity: 313 l, GENERAL Design: upright Notes: 3-legged frame, steel (painted; 1 leg shortened); clamp screws steel (with signs of corrosion) Internal diameter: 700 mm Total height: 3,050 mm Heating/Cooling: present Power: 4 kW Max. allowable operating overpressure: 10.0 bar Max. overpressure: 3.00 bar Top cover: removable / liftable top cover Agitator: anchor agitator Location: Bremen Cylinder temperature control: half-pipe coil Nameplate: Volume: 313 liters Jacket volume: 90.0 liters Jacket material: V2A 1.4301 (AISI 304) Product-contact material: V4A 1.4439 (AISI 316) Nodjxqbbhopfx Af Iewb Condition: used Cylindrical height: 630 mm Previous use: chemicals VESSEL Support type: frame HEATING/COOLING JACKET Bottom temperature control: half-pipe coil EQUIPMENT Manhole / Dome: handhole Outlet: present Note: slight residues AGITATOR Voltage Volts: 220/380 Volts Agitator arrangement: centrally mounted on the top cover

Condition: used, tank capacity: 630 l, GENERAL Design: suspended Remarks: Support ring and vessel flange made of Fe; handhole cover plated Internal diameter: 1,000 mm Total height: 2,000 mm Heating/cooling: available Max. admissible operating temperature: 300 °C Max. admissible operating overpressure: 32.0 bar Max. overpressure: 6.00 bar Top cover: removable / hinged top cover Agitator: anchor agitator Location: Bremen Cylinder temperature control: half-pipe coil Nameplate: Vacuum: 1.00 bar Volume: 630 liters Jacket volume: 14.5 liters Cylinder wall thickness: 7.8 mm Jacket material: V4A 1.4571 (AISI316) Product-contact material: V4A 1.4571 (AISI316) Condition: used Cylindrical height: 800 mm Previous application: chemical industry VESSEL Max. admissible operating temperature: 300 °C Stand type: ring HEATING/COOLING JACKET Bottom temperature control: half-pipe coil Nedpfx Aexqba Dsf Ijwb EQUIPMENT Manhole/Dome: handhole Outlet: flange DN50 AGITATOR Agitator arrangement: centrally mounted on top cover Agitator equipment: motor/gear unit missing TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 15.3 mm Top cover wall thickness: 15.8 mm

Condition: used, tank capacity: 1,150 l, GENERAL Equipment: Crane lugs Design: hanging Remarks: Halar coating inside (very good resistance to acids, alkalis, and solvents); no nameplate available; several connections have been modified by the previous operator, including one new outlet that was welded in (no coating in the weld area of the bottom plate and in the new outlet itself; no coating on the manway cover either); 5-legged frame made of Fe (galvanized; one leg slightly bent) Outer diameter: 1,250 mm Inner diameter: 1,100 mm Overall width: 1,660 mm Overall height: 2,600 mm Overall length: 1,850 mm Heating/cooling: available Insulation: available Max. overpressure: 0.60 bar Top head: bolted cover Agitator: agitator flange Location: Bremen Technical documentation: drawing Cylinder temperature control: half-pipe coil Vacuum: 1.00 bar Volume: 1,150 liters Cylinder wall thickness: 4.0 mm Nwedpfoxqbakox Af Ijb Jacket material: V4A 1.4571 (AISI316) Product contact material: Halar E-CTFE coating Condition: used Cylindrical height: 870 mm Previous application: gasoline TANK Max. permissible operating temperature: 120 °C Support style: frame HEATING/COOLING JACKET Bottom temperature control: half-pipe coil INSULATION Insulation shell: bolted Insulation shell material: aluminum EQUIPMENT Manhole / dome: on top head (DN 400) Outlet: flange DN100 Note: minor residues, dents on insulation shell MATERIAL SPECIFICATION Head material: AISI316 (V4A) 1.4571 Cylinder material: AISI316 (V4A) 1.4571 AGITATOR Agitator arrangement: eccentric in top head TECHNICAL DATA / DIMENSIONS Head wall thickness: 4.0 mm

Condition: used, tank capacity: 720 l, GENERAL Equipment: crane lugs Design: suspended Remarks: 3 feet made of Fe; bolts for the top flange mostly missing Internal diameter: 790 mm Total height: 2,250 mm Heating/cooling: present Max. permissible operating temperature: 200 °C Max. permissible operating overpressure: 6.0 bar Max. overpressure: 2.00 bar Top closure: bolted lid Agitator: beam agitator Location: Bremen Cylinder jacket temperature control: half-pipe coil Nameplate: Volume: 720 liters Double jacket volume: 52.0 liters Cylinder wall thickness: 6.2 mm Nsdpfxsxqa U Hj Af Iowb Double jacket material: V4A 1.4401 (AISI316) Product-contacting material: V4A 1.4571 (AISI316) Condition: used Cylindrical height: 1,220 mm Last application: chemicals VESSEL Max. permissible operating temperature: 150 °C Support type: feet HEATING/COOLING JACKET Bottom temperature control: half-pipe coil EQUIPMENT Outlet: available Note: motor/gearbox missing AGITATOR Baffle: Agitator arrangement: centrally mounted on top cover TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 5.9 mm Top cover wall thickness: 8.2 mm

Condition: used, tank capacity: 1,333 l, GENERAL Design: vertical Notes: Handhole DN 200 Speed: 49 rpm External diameter: 1,250 mm Internal diameter: 1,188 mm Total height: 2,850 mm Heating/Cooling: equipped Power: 0.75 kW Max. permissible operating temperature: 143 °C Nwodpfx Asxqa Ugjf Iob Max. permissible operating overpressure: 3.0 bar Max. overpressure: 3.00 bar Top cover: removable/top-hinged Agitator: beam agitator Location: Bremen Technical documentation: drawing of a similar vessel Cylinder temperature control: double jacket Nameplate: Vacuum: 1.00 bar Volume: 1,333 liters Double jacket volume: 100.0 liters Double jacket material: V2A 1.4301 (AISI304) Product-contacting material: V4A 1.4571 (AISI316) Condition: used Previous application: pharmaceutical VESSEL Max. permissible operating temperature: 143 °C Base design: height-adjustable feet Number of feet: 3 HEATING/COOLING JACKET Bottom temperature control: double jacket EQUIPMENT Manhole / Dome: handhole Outlet: available Note: slight residues/adhesions MATERIAL SPECIFICATION Feet material: stainless steel AGITATOR Voltage: 220/380 Volts Agitator arrangement: centrally in the top cover