Used Condensate Valve for sale (7,554)

Condition: used, Ultrafilter ultraaqua autoclean 0016 AC Nljdpfx Asidx Uisi Ash Donaldson Ultrafilter ultrafiltration system for compressed air compressor condensate Oil/water separator for compressed air condensate ● Treatment system for separating compressed air condensate and condensates with difficult separation properties (e.g., stable emulsions) using cross-flow filtration. ● Physical separation principle guarantees residual oil content of < 5 mg/l in water. ● Intelligent control concept with programmable controller for safe system operation, including plain text display via a text display, fault monitoring via alarm messages with potential-free contacts, and optional external network connection. ● Optimized cleaning through comparison of input/output extends cleaning intervals and saves operating costs. ● Thermally and chemically highly resistant ceramic membrane with a long service life. ● Frost protection with integrated heating. ● High-quality, corrosion-resistant materials for tanks, pipelines, pumps, seals, and valves. Manufacturer: Donaldson Ultrafilter System type: ultraaqua autoclean 0016 AC Electrical data: 3 x 380 V, 50 Hz, 2.6 kW Compressed air: pmin: 5.5 bar, pmax: 8.5 bar, Pneurop 4 Water: pmax: 5 bar Membrane: pHmin: 1, pHmax: 11, tmin: 5°C, tmax: 70°C You can find other filtration systems in various sizes – new and used – in our shop! International shipping costs available upon request!

Condition: used, MyRef MY-ZB26-TFD Refrigeration Unit MyRef MY-ZB26-TFD Condensing Unit suitable for refrigeration applications Typical applications include: Freezer chests in supermarkets and mini-markets Cold storage warehouses Beer cellars Milk cooling systems Standard features: Copeland Scroll M compressor ZB series with sound-dampening shroud Nljdpfsvtl T Dex Ai Ajh Oil sump heater Liquid receiver with burst protection Filter drier Externally visible sight glass Ball shut-off valves Component-tested combined HD/ND safety pressure switch Electrical equipment: Control box IP 55, compressor contactor, DIN rail mounting Condenser is protected and integrated into the housing Condenser fins coated with epoxy resin phenol (gold lacquer*) High-quality housing: solid construction in 1.5 mm galvanized and powder-coated steel sheet, base plate and feet in 2 mm steel sheet Frame construction with individually removable panels; all screws and components are easily accessible from the front with minimal effort Blind rivet nuts with locking screws for secure, durable fastening without rust problems Pressure-controlled speed regulator with EMC filter Space-saving mounting of several units side by side is possible; required mounting distance 25 mm Type: MyRef -ZB26-TFD Copeland Scroll Condensing unit type: MyRef -ZB26-TFD Built-in compressor type: ZB19-KQE-TFD-525 Sound pressure level: 39 dbA-10 m Receiver volume: 6 liters Air flow: 4500 m³/h Refrigerating capacity: 9 kW Voltage: 400V, 3PH, 50Hz Current consumption: 8.9 A Dimensions: H x W x D 715 x 1120 x 450 mm Weight: 102 kg You can find more items – new and used – in our shop! International shipping costs on request!

Condition: new, I am selling new valves, dampers, and condensate pots, everything shown in the picture, also available individually. Purchased from Textilka, Switzerland. High-quality products, total weight approximately 4.5 tons. Nodpozzfdzjfx Ai Aelh

Condition: good (used), Year of construction: 2005, functionality: fully functional, cooling capacity: 47 kW (63.90 HP), type of input current: three-phase, overall weight: 240 kg, noise level: 34 dB, input frequency: 50 Hz, Equipment: freezer, Ciat Dynaciat LGN 120 CIAT DYNACIAT LGN120 liquid chiller without condenser. manufacturer: CIAT DYNACIAT year of manufacture: 2005 Electronic control cooling capacity: 34/47kw Compressor 1pc - Hermetic SCROLL type SZ125S4CC refrigerant R407C Evaporator - Brazed plate heat exchanger heat exchanger capacity: 4.2 liters - Plate patterns optimized for high efficiency - 19 mm armaflex thermal insulation connection: 1.5" machine dimensions: height: 121cm full core: 160cm width:79cm length:88cm weight: 190kg Nljdpfx Aovzrxcoi Aoh - Electronic expansion valves - Service valves on the liquid line ■ Control and safety devices - Water temperature control sensors - Evaporator frost protection sensor - Factory-installed evaporator water flow regulator - 24V control circuit - Connect the Touch microprocessor-controlled electronic control

Condition: used, machine/vehicle number: FN535356, Year of construction: 2017, operating hours: 3,483 h, load capacity: 3,500 kg, lifting height: 3,600 mm, fork length: 1,800 mm, Equipment: UVV, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 3,500 kg Lifting height: 3,600 mm Fork length: 1,800 mm MACHINE DETAILS Mast type: Duplex mast Drive type: LPG Dimensions & Weight Dimensions (L x W x H): 5,700 x 1,300 x 2,420 mm Own weight: 4,896 kg UVV certification valid until: 05/2027 Next service due in: 516 hours Starter battery: new in 05/2027 Operating hours: 3,483 hours EQUIPMENT Former Jungheinrich full-service unit Side shifter Free-lift mast without center hydraulic cylinder 3rd valve Full cabin Heater Windshield wiper LED work light (front) LED work light (rear) Comfort seat LPG cylinder exchange system All dimensions are rounded values. No warranty is given for typing or measurement errors. Collection conditions: Nlodpfxsz S Nrio Ai Ash Lateral loading up to 6 tons is possible with a large forklift on site. Loading is at your own risk. Rear loading via ramp is possible for truck heights of 100–150 cm, up to 15 tons, and up to a width of 230 cm. Collection is only possible after receiving payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If collection is not carried out on time, a storage fee of €20 per machine per day will be charged. Outstanding storage fees must be paid in full before collection. Lot number: 172

Condition: good (used), Condensate drain, pressure reducing valve, condensate drain, valve, check valve, control valve -Manufacturer: Bekomat Ecoair, condensate drain type KA02 ACO AO / AK 05 -Voltage: 230 VAC/50 Hz Njdjvuzpkepfx Ai Ajlh Temperature: 1 °C/ 60 °C -Nominal pressure: max. 16 bar -Quantity: 2 available Price: per piece -Transport dimensions: 220/140/H150 mm -Weight: 1.6 kg/pc.

Condition: used, Year of construction: 2015, operating hours: 12,091 h, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 8,000 kg Lifting height: 5,450 mm Mast: Triplex mast with full free lift Fork length: 2,000 mm Fork adjustment: Hydraulically adjustable Nljdoz S Nm Tjpfx Ai Ajh MACHINE DETAILS Machine type: Diesel forklift UVV certificate valid until: 05/2027 Dimensions & Weight Dimensions (L × W × H): 6,300 × 2,400 × 3,200 mm Dead weight: 15,000 kg Operating hours: 12,091 h EQUIPMENT 3rd and 4th valve Formerly a Linde full-service unit Full cabin Heater Windshield wiper LED work light front LED work light rear Safety light rear Comfort seat Lumbar support Seat heating If requested, a mast that is too high can be disassembled for transport and loaded accordingly. All dimensions are approximate values. No guarantee is given for typing or measurement errors. Collection conditions: Lateral loading up to 6 t is possible with a large forklift on site. Loading is at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 t and up to a width of 230 cm. Collection is only possible after receipt of the payment confirmation by email. Collection without prior notification from Monday to Friday between 07:00 and 16:00. If collection is not carried out on time, a storage fee of €20 per machine per day will be charged. Outstanding storage fees must be paid in full before collection. Lot number: 3

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, operating hours: 11,000 h, 1. Applications & Design Designed as a horizontal bandsaw with a table layout, this machine is ideally suited for use in forges, rolling mills, die casting operations, steel finishing facilities, and tool & mold manufacturing environments. Its low table height enables installation directly on standard shop floors, simplifying material transport and handling. 2. Cutting Capacity Cutting range for round material (90°): up to 1,100 mm Cutting range for flat material (90°): up to 1,100 × 1,100 mm (Approximately 43.3 × 43.3 inches) 3. Performance & Drive System Drive power: 15 kW Saw blade speed: Infinitely adjustable between 8 – 84 m/min Total installed power: 30 kW Saw blade dimensions: 14,330 × 80 × 1.6 mm 4. Table Specifications Table size (L × W): 3,000 × 1,500 mm Maximum table load: up to 30,000 kg Workpiece support height: 700 mm 5. Machine Footprint & Weight Overall length: 6,000 mm (approximate) Width: 8,100 mm (approximate) Height: 3,850 mm (approximate) Machine weight: around 16,000 kg Nlodpfx Asw Tulgji Aoh 6. Notable Features & Options Independent traversable clamping system: Both the material clamping vice and the blade guide arms are independently movable, allowing large or oversized workpieces to be securely clamped without manual repositioning to a fixed side. Robust gantry frame: Two solid columns and support bars provide excellent stability, high load capacity, low vibration operation, and long service life. Optional 90° blade guide rotation: Allows both vertical and horizontal cutting, especially useful for notching sample workpieces. Powered duplex chip brushes: These automatically adapt to keep the saw blade clean during operation, enhancing blade life and reducing maintenance of the brushes. Integrated chip conveyor with coolant tank: Located beneath the cutting zone – collects chips and coolant, can be pulled out easily for cleaning. Open-access design for easy maintenance: All wear and maintenance parts are easily accessible, simplifying servicing, blade changes, and minor repairs. No foundation work required for installation.

Condition: used, Year of construction: 2014, Belt conveyors GF 2250-680/600 with 2 x 90° pushers (from slides) Make: Kannegiesser like new, showroom machine Year 2014 Length: 2.250 mm Belt width: 600 mm Nlsdpfsk Aa D Esx Ai Ash Total width: 680 mm incl. 2 piece pneumatic 90° off valves Wxh = 550 x 320 mm incl. 2 PCs. supports, height OK belt + 1000 mm Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartner für Intralogistik

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, cooling capacity: 680 kW (924.54 HP), type of cooling: air, Equipment: cooling unit, condenser Manufacturer: Güntner GVH 090.1.D/5-M(D) Year of manufacture:2004 Nominal power 680.4 /579.2 kw Refrigerant:R404 Refrigerant content:218.9+25 liters Flow rate: Temperature range: -50°C- +100°C Max pressure: Operating pressure: 28bar/-1bar (performance depends on usage parameters) Number of fans: 5 pcs, diameter 900 mm, Air flow:162500 /131000 m3/h Motor power consumption:17.60/11.50 Kw Heat exchanger aream2 Operating noise 52 dB Nedpfevllxdjx Ai Aelh Length: mm Height: mm Width: mm Weight: ca kg The radiator has been technically inspected, fully functional

Condition: good (used), functionality: fully functional, Year of construction: 2016, operating hours: 3,312 h, load capacity: 2,500 kg, lifting height: 5,450 mm, free lift: 1,750 mm, load center: 500 mm, fuel type: electric, mast type: triplex, battery capacity: 625 Ah, battery voltage: 80 V, DGUV certified until: 10/2027, tire condition: 95 %, front tire type: cushion tires (black), rear tire type: cushion tires (black), total height: 2,480 mm, Equipment: 3rd hydraulic function, 4th hydraulic function, CE marking, UVV, cabin, full service history, lighting, sideshift, Still RX 60-25 electric forklift with the following technical specifications: · Operating hours: 3,312 · Lifting capacity: 2,500 kg · Lifting height: 5,450 mm Nlodpfxs Adny Ij Ai Ajh · Overall height: 2,480 mm · Year of manufacture: 2016 STILL 2.5-ton electric forklift with full cabin and heater, very good battery, tires in new condition, triplex mast with full free lift, side shifter, fork positioner, lighting, single-pedal operation, mini joystick, fork length 1,200 mm (other fork lengths available on request), charger. Includes 1,000 hours of service according to STILL manufacturer specifications and a valid UVV inspection upon sale. Inspection, demonstration, and test drive are available by appointment. Sale is exclusively to commercial businesses; subject to prior sale, errors, and omissions. We can deliver your new forklift cost-effectively using our own ramp-type low-bed trailer (transport costs upon request). You can find more information and offers on our website!

Condition: used, input voltage: 230 V, operating pressure: 6 bar, Remeha / Heizbösch Gas 210 ECO 200 used condensing gas boiler for commercial and central heating systems. Nominal heat output range: 20–200 kW. Nsdpj Afbraefx Ai Ajlh Output at 40/30 °C: 22.7–214 kW. Maximum operating pressure: 6 bar. Electrical connection: 230 V / 50 Hz, 110 W, IP20. Aluminium sectional heat exchanger and modulating gas/air control. Nameplate gas category: AT-I2H; factory setting: 20 mbar. Adaptation to the local gas supply, installation and commissioning must be carried out by a qualified professional. Net price: EUR 5,000. Exact scope of delivery by agreement. Inspection by appointment in Mosonmagyaróvár, Hungary. Loading and transport by arrangement.

Condition: excellent (used), For sale: a functional Rexroth hydraulic pump with a mounted Rexroth control valve. The condition of the housing, shaft, connections, and other components is shown in the photos. Nljdpfez Spfrox Ai Aeh The following markings were read from the nameplates: Component Designation / Number Pump Type SY2DFEE-20/100-100 Pump Material Number (MNR) R901073415 Pump Serial Number 31132779 Additional Number on the Pump Nameplate Pump Designation FD 07W02, SN 000001 Valve Type VT-DFPE-A-22/G24K0/2D0V/V-019 Valve Material Number (MNR) R901031176 Additional Number on the Valve Nameplate Valve Designation SN 000002 The pump is used and shows signs of wear, as visible in the photos. Before purchasing, it is recommended to compare the complete markings on the nameplates, as well as the shaft and connections, with the requirements of your machine.

Condition: ready for operation (used), functionality: fully functional, power: 0.37 kW (0.50 HP), DMN BL-150 Nledez Rpn Uopfx Ai Ajh Rotor: stainless steel (scraping blades) Housing: steel 2.5 liters per revolution 20 rpm Motor: 0.37 kW 1380/20 rpm 1.24 A 4 units available

Condition: good (used), functionality: fully functional, Year of construction: 1998, operating hours: 2,619 h, load capacity: 2,000 kg, lifting height: 4,000 mm, free lift: 1,900 mm, load center: 500 mm, fuel type: electric, mast type: duplex, battery capacity: 500 Ah, remaining battery capacity: 86 %, battery voltage: 80 V, DGUV certified until: 10/2027, fork length: 1,200 mm, total height: 2,550 mm, Equipment: 3rd hydraulic function, 4th hydraulic function, CE marking, UVV, full service history, lighting, sideshift, Linde E 20 electric forklift with the following specifications: · Operating hours: 2,619 · Lifting capacity: 2,000 kg · Lifting height: 4,000 mm · Overall height: 2,550 mm · Year of manufacture: 1998 LINDE 2.0-ton electric forklift with a semi-cabin, very good tires (rear tires new), duplex mast with full free lift, battery with 86% capacity, side shifter, 4th valve, multi-lever, two-pedal control, lighting, fork length 1,200 mm, charger. Includes service according to LINDE manufacturer's specifications and a valid UVV inspection upon sale. Inspection, demonstration, and test drive are available upon request by telephone appointment. Sale is exclusively to commercial businesses; subject to prior sale, errors and omissions. Njdpfx Aijzrr H De Aolh We can deliver your new forklift cost-effectively with our own ramp-type low-bed trailer (transport costs on request). Further information and offers can be found on our website!

Condition: good (used), Year of construction: 2012, Approx. 170 units, pneumatic drive, spool valve, M&S, PAMS1 – used: Price per unit, ex works: €300.00 (net)! Manufacturer: M&S Type: PAMS1 Year of manufacture: 2012 Spring (normally closed) Operating pressure: 4.8 - 8 bar Njdpfsz Sdyiox Ai Aelh Air consumption: 1.2 – 2 L/stroke Condition: good Available: immediately Location: Bünde, North Rhine-Westphalia

Condition: used, Year of construction: 2009, Control system for dust extraction systems, with slide gate control including 7 motorized shut-off slide gates: 4 units with a diameter of 140 mm, 3 units with a diameter of 120 mm. Nedez R Dupepfx Ai Aslh Storage location:

Year of construction: 1993, condition: used, functionality: fully functional, APV Rosista DELTA D2 Valve Manifold – 199 Double-Seat Valves Manufacturer: APV Rosista Model: DELTA D2 Valve Manifold Year of Manufacture: approx. 1993 Condition: used Nlsdpfxoz Ib T Ao Ai Ajh Application: Dairy Industry / Food Processing Total number of valves: 266 pcs. Double-seat valves: 199 pcs. Nominal sizes: DN65 / DN100 Composition of the valve manifold: - 84 pcs. APV Rosista DELTA D2 Double-Seat Valves – DN100 - 115 pcs. APV Rosista DELTA D2 Double-Seat Valves – DN65 - 67 pcs. pneumatically actuated APV shut-off valves - 4 pcs. Endress+Hauser Promag P magnetic-inductive flow meters - 4 pcs. Fischer & Porter flow meters - 7 pcs. APV centrifugal pumps - extensive stainless steel piping - pneumatic actuation of the valves - valve controls / pneumatic connections - complete stainless steel substructure In total, the valve manifold has 266 pneumatically actuated APV valves, including 199 APV DELTA D2 double-seat valves.

Year of construction: 2023, condition: used, functionality: fully functional, machine/vehicle number: EF2UA23105068402, This is an UltraVent condensation hood from the premium manufacturer Rational, type UV 202E. This hood can be used with iCombi appliance sizes 20-2/1 in an electric version. Thanks to the condensation technology, the UltraVent binds escaping vapors. An external connection or the extension of an existing exhaust system is not required for this recirculating hood. The hood has been inspected in our in-house workshop and is fully functional. The stated price is the gross price, including 19% VAT. Nedpszu R Ufsfx Ai Aelh The recommended retail price for this hood is €7,233.00 net. Service: We will gladly connect you with a certified Rational customer service representative throughout Germany. Are you looking for a specific Rational appliance type? Ask us; we have access to an extensive range of used and new products. We will gladly advise you on all appliance types, whether SCC, CM, CMP, VCC, iVario, iCombi Classic, and Pro. Our appliance service for you: 6-month warranty on all electrical parts High-quality branded appliances at fair prices Professional overhaul/inspection & expert cleaning Inspected & fully functional - or your money back Flexible shipping or self-collection options Competent advice - before and after purchase Provision of operating instructions, connection diagrams & spare parts Inspection according to DGUV V3 Technical data: External dimensions WxDxH: 1084x1134x337mm Electrical connection: 1NAC 230V 50Hz 0.16kW Serial number: EF2UA23105068402 Year of manufacture: 2023 Maximum extraction rate: 705 m3/h Operating noise: Average: 50-65 dB(A) Condition: Used, inspected, and fully functional. SHIPPING: Delivery or self-collection by arrangement Worldwide shipping on request Shipping to islands or mountain stations only by arrangement Do you have any questions, would you like to receive advice, or would you like to see something on-site? You can reach us by telephone during our opening hours: Monday to Friday, 09:00 - 13:00 and 14:00 - 17:00. The sale is exclusively subject to our general terms and conditions (GTC), which can be found at the link "Legal Information".

Condition: used, Caterpillar D6T LGP crawler, year of manufacture: 2014, operating hours: 16,261 h, last service at 16,013 h, undercarriage: 65%, engine: CAT [169 kW/230 hp], air conditioning, ripper valve, battery master switch, in good condition, ready for immediate use! Upon request, we can provide you with a leasing or financing offer. Mr. Mihm (Tel. will be happy to assist you. Further information can be found on our website. Subject to errors and prior sale! = More information = Year of manufacture: 2014 Operating hours: 16,261 Drive type: Crawler Nedpfsy H Uupsx Ai Aolh Please contact Tobias Ebert for further information.

Condition: used, Year of construction: 2004, machine/vehicle number: PMPM000167, for Sparkling wine, wine and other beverages with CO2 Sekt, Wein und andere Getränke mit CO2. Nsdpfsz Ri T Rjx Ai Aelh Rinsing Machine NOVA 20/1050 Counterpressure filler ELETTRA 1400/23 with 28 filling valves Capper-cork Machine DELTA 804 Eletrical Panel Pre-evacuation Pump Bottle format parts 375ml to 1500ml

Condition: used, Used Matra valve grinding machine with double-cone collets as shown, 380 Volt electric motor fully functional. Nedpfx Aisz R Nptj Aslh Please do not send email enquiries! If you have any questions, we are happy to assist you by phone. Viewing and collection only possible by prior telephone appointment! Subject to alterations, prior sale, and errors.

Condition: new, Year of construction: 2026, functionality: fully functional, VSM3.0DRO A-M Valve seat milling machine - new machine. Digital display valve seat milling machine. High precision valve seat milling machine specifically designed for multi-valve cylinder heads. Machining capacity from 16 mm to 90 mm. Variable speed from 100 to 1200 RPM. Max. cylinder head width: 500/19,7 mm/inch Max. cylinder head height: 450/17,7 mm/inch Tilt degree of cylinder head: +42°- -42° Max. tilt degree of spindle: 5° Travel: -Cross: 930/37 mm/inch -Longitudinal: 40/1,6 mm/inch -Spindle: 200/8 mm/inch Spindle power: 1.8 kw Max. rotation speed of spindle: 0-1000 RPM Power supply: 380V/50Hz 3ph vagy 220V/60Hz 3ph Nodpevmpnlefx Ai Ajlh Air compressor supply: 6/87 Bar/psi Noisy level: at 400 RPM 72dBA; at 1200 RPM 82dBA Weight: 1050/2310 kg/lb Dimension (L x W x H): 1040 mm x 1050 mm x 2170 mm

Year of construction: 2021, condition: used, Removes oil from your compressor condensate The Alup OWS 18 collects the condensate from a screw compressor, dryer or receiver and separates out the oil. The water that is left can then usually go straight into the drain, so you do not have to have oily condensate taken away. The separator was built in 2021, weighs 6.8 kg empty and is compact enough to sit next to the compressor. Located in Emmeloord, the Netherlands. Immediately available, price on request. Nljdsz Ndazjpfx Ai Ajh More photos and full specifications: / Type: Oil-water separator for compressor condensate Filtration: Oil filter and activated carbon filter Weight: 6.8 kg (empty)

Condition: used, Year of construction: 1991, Output of 6,000 x 0.75 l Nedpfx Aioz Sdl Es Aslh