Used Coolant Valve for sale (10,482)

Year of construction: 2012, condition: good (used), Separator sluice / cell wheel sluice Nestro, year of manufacture 2012, for the separation / differentiation of paper chips or paper edge sections. Technical data: Manufacturer: Nestro Lufttechnik GmbH Year of manufacture: approx. 2012 Motor: 4 kW Volume flow rate max. 28000 m³/h Inlet diameter max.: 450 mm Speed: 22 rpm Rotor width: 1500 mm Rotor diameter: 1200 mm Dimensions: 2200 x 2200 x 2500 mm (L x W x H) Weight: approx. 3000 kg Note: Fpsdjzt Ipkspfx Aa Rjk The machine is in good condition. It was inspected and tested by us in 28816 Stuhr. The video can be found at the top of our website or on our YouTube channel. Inspections, including under power, are possible at any time by arrangement. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or for any errors. The offers are non-binding, subject to prior sale, and can be revoked at any time. Inspections are possible by arrangement. The sale is made against advance payment, ex works, without any warranty.

Condition: used, Rotary valve, rotary airlock Manufacturer: TrennSo Type: AS 600x1400-6 Fsdpfx Aeztm H Isa Rjpk Working width: approx. 1400 mm Rotor with flexible, replaceable rubber lips With free shaft end, without drive Condition: unused

Condition: used, Rotary valve, rotary airlock Manufacturer: TrennSo Type: AS 600x1400-6 Working width: approx. 1400 mm Rotor with flexible, replaceable rubber lips With free shaft end, without drive Condition: unused Fedpfx Aaoztmxqj Rjpk

Condition: good (used), functionality: fully functional, Year of construction: 2010, operating hours: 8,806 h, load capacity: 4,000 kg, lifting height: 4,450 mm, free lift: 150 mm, load center: 500 mm, fuel type: electric, mast type: other, construction height: 3,150 mm, battery capacity: 870 Ah, remaining battery capacity: 80 %, battery voltage: 80 V, DGUV certified until: 08/2027, fork length: 2,400 mm, total height: 3,150 mm, Equipment: CE marking, UVV, cabin, full service history, lighting, sideshift, Still RX 60-40 electric forklift with the following specifications: Lifting capacity: 4,000 kg Lifting height: 4,450 mm Overall height: 3,150 mm Fpodezivgcopfx Aa Rjk Year of manufacture: 2010 Operating hours: 8,806 STILL 4.0-ton electric forklift with full cabin and heater, 80% battery, good tires (new rear tires), telescopic mast for unobstructed visibility, side shifter, 4th valve, pre-installation for StVZO (German Road Traffic Act), fork length 2,400 mm, charger. Additional attachments such as fork positioners, rotators, etc., as well as other fork lengths are available upon request. Price ex works, including 1,000 hours of service according to STILL manufacturer's specifications and a valid FEM (UVV) inspection upon sale. Inspection, demonstration, and test drive are available by appointment. Sale is exclusively to commercial businesses; subject to prior sale, errors and omissions excepted. We can deliver your new forklift cost-effectively using our own ramp-type low-bed trailer (transport costs upon request). You can find more information about us and other offers on our redesigned website!

Condition: good (used), functionality: fully functional, Year of construction: 1998, operating hours: 2,618 h, load capacity: 2,000 kg, lifting height: 4,000 mm, free lift: 1,900 mm, load center: 500 mm, fuel type: electric, mast type: duplex, battery capacity: 465 Ah, battery voltage: 80 V, DGUV certified until: 08/2027, fork length: 1,200 mm, total height: 2,550 mm, Equipment: CE marking, UVV, full service history, lighting, sideshift, Linde E 20 electric forklift with the following specifications: * Operating hours: 2,618 * Lifting capacity: 2,000 kg * Lifting height: 4,000 mm * Overall height: 2,550 mm * Year of manufacture: 1998 LINDE 2.0-ton electric forklift with a semi-cabin, very good tires (rear tires new), duplex mast with full free lift, side shifter, 4th valve, multi-lever, two-pedal control, lighting, fork length 1,200 mm, charger. Fpjdpfezrr H Djx Aa Rjk Includes service according to LINDE manufacturer's specifications and a valid UVV inspection upon sale. Inspection, demonstration, and test drive are available by appointment only. Please call to schedule. Sale is exclusively to commercial businesses. Subject to prior sale, errors and omissions excepted. We can deliver your new forklift cost-effectively with our own ramp-equipped low-loader (transport costs upon request). You can find more information and offers on our website!

Condition: excellent (used), Kongskilde cyclone separator with rotary valve For sale is a Kongskilde cyclone separator, including an installed rotary valve with gear motor and connecting hose. Fpodpozrlznsfx Aa Rsk This unit is suitable for separating and discharging chips, granules, dust, or similar materials in dust extraction and conveying systems. The cyclone is mounted on a sturdy frame and stands on a transport pallet. Scope of supply as shown in the photos: Kongskilde cyclone separator Rotary valve with drive Frame Connecting pipe and flexible hose Inspection at our warehouse is possible by appointment. If you have any questions or are interested, please do not hesitate to contact us.

Condition: used, Inlet diameter: 260 mm Fsdszr Hg Sepfx Aa Rspk with sprocket and drive shaft

Condition: used, Inlet cross-section approximately 450 mm Fsdpfx Aszr Hglsa Rspk with SEW gearmotor, 3 kW.

Condition: used, Tool sharpening machine with coolant pump. Once the correct grinding angle has been set, the tool is ground using a manual/linear feed. Fpsdpszrx Ihsfx Aa Rok Technical data: - Tool shank: 35 mm - Clamping length: 65 mm

Condition: used, Norgren I374997 Technical data: - Condition: As new Fodpfxszrxtqe Aa Repk

Condition: used, Technical data: Fpsdpjzrxtkjfx Aa Rok - Length: approx. 435 mm - Width: approx. 210 mm - Height: approx. 160 mm - Hole spacing: 120 mm - Clearance height: approx. 85 mm - Condition: As new

Condition: used, 2 items as good as new Fedpezrxnzefx Aa Rspk

Condition: used, New Technical data: Fpodszrxmdjpfx Aa Rjk - Type: 2431.52.00.36.05

Condition: used, New Technical data: - Type: 2431.52.00.35.05 Fpodpfxezrxl Ts Aa Rek

Condition: used, Pneumatic valves suitable for WEINIG type UNIVAR 10 or similar Standard operation on both sides or spring-return Fjdszrxlajpfx Aa Rjpk Technical data: - Number: 27

Condition: used, Coolant Filtration Unit,Coolant treatment unit, Industrial Liquid Filter System, LOSMA Spring F3, Used Machine Manufacturer: LOSMA S.p.A. (Curno, Italy) Model: Fpjdpfx Aajzgh S Ss Rjk SPRING F3 Overall Dimensions: Width: 2050 mm Depth: 1020 mm Height: 1350 mm Technical Specifications: Manufacturer (Main Unit): LOSMA S.p.A. (Curno, Italy) Series / Model: SPRING F3 Year of Manufacture: 2005 Serial Number: 0001 Control Panel Manufacturer: effegi impianti s.r.l. (Industrial Electrical Distribution & Automation) Power Supply: 380 V, Three-phase Maximum Current: 16 A Control Voltage (Auxiliary): 24 Vac / 24 Vdc Protection Rating: IP65 (Dust-tight and protected against water jets) Standard: CEI 17-13/1

Condition: good (used), Year of construction: 2004, Overall dimensions: 3300 x 2100 x 2200 mm Year of manufacture: 2004 Fodpfx Aoiuxmvea Rjpk Processing and filtering capacity: 700 l/min Filter fineness: 40 ppm > 20 µm Filling volume: 7250 l Pump capacity: 7,5 kW; 550 l/min; 5 bar

Condition: excellent (used), Safety valve for refrigeration compressor, refrigeration unit, cooling compressor, refrigeration unit, cooling compressor, compressor, filter dryer housing, shut-off valve, ball valve, temperature switch, thermostat, expansion valve, safety valve -Manufacturer: Hansa, safety valve, unused, original packaging Fpjdefyfxbopfx Aa Rjk -Type: KSV 28 bar 2442280050 -Connection: G1/2" -Number: 5 safety valves available -Price: per piece -Package dimensions: 150/80/H55 mm -Weight: 0.6 kg/piece

Condition: used, 24x Neway Check Valves, Various Sizes, Ratings and Materials (Unused) 3x 10" CL900 Flanged Swing Check Valves ASTM A105 / A216-WCB/WCC MESC 7710051661 7x 10" CL150 Flanged Swing Check Valves 5x ASTM A105 / A216-WCB/WCC MESC 7710200161 2x ASTM A182-F316 / A351-CF8M MESC 7713030161 8x 6" CL900 SCH 40S Butt Weld Swing Check Valves Fjdpfx Ajzn Rc Asa Rspk ASTM B564 UNS N06625 Inconel 625 MESC SPI-NLMF01588-1426 4x 10" CL150 Lug-Style Dual-Plate Check Valves ASTM A216-WCB/WCC MESC 7767263161 1x 16" CL150 Lug-Style Dual-Plate Check Valve ASTM A216-WCB/WCC MESC 7767110191 1x 24" CL150 Double Flanged Dual-Plate Check Valve ASTM A351-CF8M MESC 7768140231

Condition: used, input voltage: 400 V, input frequency: 50 Hz, cooling capacity: 5.5 kW (7.48 HP), immersion depth: 460 mm, Equipment: type plate available, Spandau Pump, SKF Lubrication Systems Germany GmbH Submersible centrifugal pump, submersible pump, coolant submersible pump, centrifugal pump unit, immersion pump TYPE PSL0303GBS460N05BA Immersion depth: 460 mm, 400 V, 50 Hz Delta connection 5.5 kW IE2 Tmax 80°C Qmax 1200 l/min, Hmax 49 m Weight 80 kg The coolant pump is used and was mounted on a filter system. The nameplate on the centrifugal pump states "Made in Germany". Fedpfxjw Rvhdj Aa Rspk Price negotiable. Our asking price is €1,880 net, ex works, plus packaging costs. All technical data is subject to printing errors and errors. We only sell to countries within the European Community.

Condition: ready for operation (used), Coolant – Filter System KNOLL KF 600 / 1500 -CE marking -Coolant tank -Paper band filter -Control system – OP 3 -Coolant pumps -Electrical diagrams Fsdpfx Aajztyfde Repk Dimensions: L x W x H 2.4 x 1.2 x 1.5 meters / Weight 1200 kg Errors and omissions excepted.

Condition: used, Year of construction: 2003, machine/vehicle number: M338, Used Crown Bevcorp 40 valve filling monoblockTechnical Specifications & Performance DataThis used can filling monoblock combines a Bevcorp UB40 rotary can filler with an Angelus 61H seamer, delivering dependable performance for industrial packaging and beverage production. The system is configured for aluminum cans and is supplied with tooling for multiple can body styles. It is an excellent option for a second hand solution within a used bottling line where reliability and ease of integration are essential.Filler model: UB40 rotary can fillerFiller valves: 40Seamer model: 61HOverhauled in 2019Containers: Aluminum cans (standard and sleek)Ends: 202 can endsSpeed: 20.000 BPHConfigured can sizes: 12 oz (approx. 0.355L) and 16 oz (approx. 0.473L)Included components: Can transfer conveyor, electrical panel, lubrication panel system, stainless steel mechanical safety guarding, handling parts, operator manualElectrical: 480 V, 3 Ph, 60 HzNitrogen dosing: Vacuum barrier nitrogen dosing systemCondition: Used – good; regularly maintainedAdvanced Automation & Control SystemsThe monoblock includes an integrated electrical panel to manage coordinated operation of the filler and seamer. Safety interlocks and stainless steel safety guarding support operator protection during beverage production. Variable speed drive elements are supported by a dedicated lubrication approach for reliable operation under continuous duty. Quick access to guarding and panels facilitates routine adjustments and preventive maintenance in industrial packaging environments.Production Line Integration CapabilitiesDesigned to operate inline with upstream and downstream equipment, this filler–seamer block integrates smoothly into a used bottling line or a new beverage production layout. The included can transfer conveyor simplifies synchronization between the 40-valve filler and the 61H seamer. Existing handling parts and tooling accommodate both standard and sleek aluminum cans with 202 ends, supporting efficient format changes between 12 oz and 16 oz. The monoblock can operate as part of a complete packaging machinery setup alongside depalletizing, rinsing, coding, and case packing systems.Machine Condition & Maintenance HistoryThe equipment is described as used – good and has been regularly maintained. Mechanical safety guarding, lubrication panel, and operator manual are included, indicating a machine that has been cared for and kept in service-ready condition. This makes it a strong second hand choice for plants seeking to expand or refresh beverage production capacity with minimal downtime.Operational Performance & VersatilityEngineered for flexibility, the monoblock is capable of running carbonated and non-carbonated beverages. The 40-valve filler supports steady throughput and consistent fill accuracy, while the Angelus 61H seamer is recognized for robust end application and seam integrity. The vacuum barrier nitrogen dosing system enhances product quali... Fpodpfxjzcf Ido Aa Rek

Condition: used, Used Matra valve grinding machine with double-cone collets as shown, 380 Volt electric motor fully functional. Fpodpfxjzti Uzj Aa Rsk Please do not send email enquiries! If you have any questions, we are happy to assist you by phone. Viewing and collection only possible by prior telephone appointment! Subject to alterations, prior sale, and errors.

Condition: used, Year of construction: 2018, weight 582 kg operating pressure 16,0 bar capacity 36,0 l/min viscosity VG10 voltage 400/50 V/50 control voltage 24 VDC Continuous flow recooling unit for boring machines - Cooling capacity 9.0 kW at 40° ambient temperature - Permissible ambient temperature: +10°C to +40°C - Pressure loss: 0.5 bar - Refrigerant type: R134a - Refrigerant charge weight: 2.1 kg - Permissible operating pressure: 24 bar - Total electrical connection: 3.19/11.81 kW/A - Continuous sound pressure level: 75 dB Fodpfxjznnf Ie Aa Repk

Condition: ready for operation (used), Year of construction: 2009, Armin Gries coolant recycling system OS 240 / coolant processing system - Year of manufacture: 2009 - Conveying/circulation pump - Oil separator - Filter system - Sludge separation - Tank container - Control unit Fpjdpfxsztfnws Aa Rjk - Return of the cleaned coolant Dimensions: L x W x H 0.6 x 0.3 x 0.9 meters / Weight 50 kg Subject to errors and omissions.