Used Coolant for sale (4,600)

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: 1539000208A, travel distance X-axis: 1,035 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 510 mm, controller model: Heidenhain TNC 620, rotational speed (max.): 10,000 rpm, Note: The seller can offer disassembly and loading for an additional charge. TECHNICAL DETAILS Travel range, X-axis: 1,035 mm Travel range, Y-axis: 560 mm Travel range, Z-axis: 510 mm Rapid traverse rate: 25 m/min Table size: 1,200 × 560 mm Motor spindle speed: 10,000 rpm AC main drive power: 13/9 kW at 40/100 % duty cycle Tool positions: 20 Tool holder: SK 40 MACHINE DETAILS Control system: Heidenhain TNC 620 Connected load: 17 kVA Rated current: max. 28 A Lrjdpoztb Imofx Aglor Fuse rating: 35 A Supply voltage: 400 V Supply frequency: 50 Hz Input voltage: 230 V Output voltage: 24 V Weight: 4,100 kg EQUIPMENT Electronic handwheel Chip conveyor with extended coolant tank Coolant air blast switchover Coolant spray gun Heidenhain TS 649 touch probe

Condition: ready for operation (used), Year of construction: 2010, operating hours: 7,672 h, functionality: fully functional, machine/vehicle number: 0040000281C, turning length: 500 mm, spindle speed (max.): 6,000 rpm, overall weight: 4,300 kg, controller model: Heidenhain Plus IT DinPlus/TurnPlus V7, Note: The seller can offer disassembly and loading for an additional charge. TECHNICAL DETAILS Turning length: 500 mm Y-axis stroke for cross slide: ±40 mm Spindle type: Integrated spindle motor ISM 52 Plus Drive power: 20/27 kW at 100/40% duty cycle Spindle speed: 6,000 rpm Turret: 12-station disc turret Sauter Tool holder: VDI 30, DIN 69880-30 Tool drive: Connection/drive according to DIN 5480 MACHINE DETAILS Control: Heidenhain Plus IT DinPlus/TurnPlus V7 Clamping system: Hydraulic sub-collet chuck Draw tube inner diameter: 52 mm Measuring system: Direct measuring system Glass scale: X-axis Connection power: 25 kVA Rated current: max. 40 A Fuse: 44 A Lrjdpfx Agoztb Adeler Mains voltage: 400 V Mains frequency: 50/60 Hz Input voltage: 230 V Output voltage: 24 V Weight: 4,300 kg Operating hours (according to counter) Spindle hours: 7,672 h 2nd counter: 22,936 h EQUIPMENT C-axis Hydraulic spindle brake Tailstock Chip conveyor with coolant system Connection nozzle for oil mist separator including electrical connection Coolant spray gun Separate speed limiting device for the main spindle for power chucks with reference speeds below the maximum machine speed Documentation Tool case for disc turret Ø 30

Condition: like new (used), Year of construction: 2004, operating hours: 10 h, functionality: fully functional, machine/vehicle number: 2011-004, pressure (max.): 80 bar, operating pressure: 80 bar, coolant tank capacity: 900 l, Like-new, compact filter system INTERLIT SPB 4/900, high-pressure system with 40/80 bar pumps, switchable pressure stage with a polishing filter, communication via Profibus with the machine. Lrodpszva Hyjfx Agler

Condition: ready for operation (used), Year of construction: 2014, operating hours: 15,662 h, functionality: fully functional, travel distance X-axis: 620 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 460 mm, controller model: Heidenhain TNC530i, spindle speed (max.): 12,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 620 mm Travel range, Y-axis: 520 mm Travel range, Z-axis: 460 mm C-axis: 360° B-axis: -50° / +110° Rotary table diameter: 500 mm Spindle speed (max.): 12,000 rpm Spindle type: SK40 Number of spindles: 1 Lredpfx Aezr Nmbeglsr Number of tool positions in the tool magazine: 30 MACHINE DETAILS Control system: Heidenhain TNC530i Operating hours (see image) Control system operating hours: 38,569 h Machine operating hours: 37,263 h Spindle operating hours: 15,662 h EQUIPMENT Documentation/Manual Speed infinitely adjustable Chip conveyor Scraper-type chip conveyor Workpiece measuring probe Coolant system Compressed air via M-command Heidenhain handwheel Kinematic optimization cycle Note: The machine is sold without tools, vise, and clamping plate.

Condition: ready for operation (used), Year of construction: 2001, operating hours: 27,267 h, functionality: fully functional, turning length: 180 mm, turning diameter: 100 mm, spindle bore: 43 mm, spindle speed (max.): 6,000 rpm, travel distance X-axis: 125 mm, travel distance Z-axis: 195 mm, TECHNICAL DETAILS Turning diameter: 190 mm Turning length: 180 mm Max. turning diameter: 100 mm Travel X-axis: 125 mm Travel Z-axis: 195 mm Rapid traverse X-axis: 15 m/min Rapid traverse Z-axis: 20 m/min Spindle bore: 43 mm Spindle bearing diameter: 80 mm Spindle speed range: 60–6,000 rpm Tailstock diameter: 40 mm Tailstock taper: MK 3 Tailstock travel: 45 mm Number of tool positions: 10 MACHINE DETAILS Transformer: 400 V / 200 V Data interface: V.24 / RS-232-C Operating hours: 27,267 h EQUIPMENT Bar feeder Integrated CNC control Space-saving, compact design Inductively hardened flat guideways for bed and carriage Continuously variable AC main spindle drive Constant cutting speed programming Integrated cold light Ammeter for main spindle drive Swiveling central control panel Controls for automatic, manual, and CNC programming modes Three-phase servo motors for X and Z axes Backlash-free, pre-tensioned precision ball screws for X and Z axes Automatic central lubrication with electrical monitoring Coolant system with tank, pump, lines, and spray nozzle Electric 10-position turret system, MORI SEIKI Automatic turret indexing logic Direct coolant supply through the turret disk Fixed hydraulic unit for power chuck Front sliding door with large viewing window Ljdpfxozul T Ne Aglsrr Electrical connection for chip conveyor, prepared Electrical equipment according to VDE 0113 Attached control cabinet Freestanding transformer

Condition: repair required (used), Year of construction: 1998, functionality: limited functionality, turning length: 330 mm, turning diameter: 248 mm, spindle speed (max.): 6,000 rpm, travel distance X-axis: 190 mm, travel distance Z-axis: 370 mm, The machine’s control system is defective. TECHNICAL DETAILS Turning diameter: 248 mm Turning length: 330 mm Travel distance X-axis: 370 mm Travel distance Z-axis: 190 mm Spindle bore: 45 mm Spindle speed: 6,000 rpm Tailstock quill travel: 120 mm MACHINE DETAILS Transformer: 400 V / 200 V EQUIPMENT Integrated CNC control Machine and control as a closed transport unit Linear guides in the X and Z axes Continuously variable AC main spindle drive Programming for constant cutting speed Integrated cold light Power meter for the main spindle drive Lredpfx Ajzul Utjglor Controls for automatic, manual operation and CNC programming Central control panel on the right side of the machine High-dynamic three-phase servo motors for the X and Z axes Backlash-free, pre-tensioned precision lead screws for the X and Z axes Automatic central lubrication with electrical monitoring for bed, cross slide and ball screw drives Coolant system with tank, pump, lines and nozzle Electric 12-station turret system MORI SEIKI with automatic direction logic Direct coolant supply through the turret Fixed hydraulic unit for the power chuck Full enclosure of the working area Front sliding door with large viewing window Electrical connection for chip conveyor prepared Data interface V.24 / RS-232-C Control cabinet Freestanding transformer 400 V / 200 V

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, number of spindles: 2, spindle speed (max.): 4,500 rpm, turning length: 145 mm, turning diameter: 240 mm, travel distance X-axis: 130 mm, travel distance Z-axis: 145 mm, Horizontal, twin-spindle CNC lathe with 2 turrets in two working areas and 2 loading portals! The machine underwent an overhaul in 2023! TECHNICAL DETAILS Turning diameter max.: 240 mm Turning length max.: 145 mm Travel X-axis: 130 mm Travel Z-axis: 145 mm Distance between spindles: 340 mm Rapid traverse X/Z-axis: 24 m/min Guidance X-axis: Roller linear guide Guidance Z-axis: Round guide, 145 mm Number of spindles: 2 Spindle drive power: 11 / 7.5 kW Max. spindle speed: 4,500 rpm Torque: 93 Nm Spindle nose: JIS A2-5 Chuck size: 210 mm (8 inches) Number of turrets: 2 Turret type: BT turret Tool positions per turret: 8 Shank size for external turning tools: 20 × 20 mm Max. shank diameter for boring bars: 40 mm MACHINE DETAILS Control: Fanuc 32i-B Working areas: 2 Power connection: 30 kVA Dimensions & Weight Footprint: 4,500 × 2,440 mm Overall height with loader: 2,550 mm Weight: 4,400 kg Loading portal GT Twin with two independent portals Dual gripper for raw and finished parts Turning station Control unit with cable Max. workpiece diameter: 120 mm Max. workpiece length: 80 mm Max. workpiece weight: 3 kg EQUIPMENT Stack magazine, on the left side Parts conveyor belt, on the right side Chip conveyor, on the rear side Coolant tank Coolant supply through both spindles for flushing the clamping devices Various tool holders Various clamping devices Documentation and wiring diagrams Lrodpfx Asztxlcjglsr

Condition: used, Year of construction: 2016, Coolant cleaning system Manufacturer: Zyklomat Type: ZKR 14/350 Ledpfx Ajzwccmeglorr Year of construction: 2016 For cleaning grinding emulsions Supply of max. approx. 250 L/min. at approx. 3.5 bar water Transfer to the filter system is carried out by the customer, air and foam-free. Temperature max.: 50°C Cleaning capacity: 350 L/min. Recirculation from clean tank to dirty tank: 100-350 L/min. Machine supply max.: 250 L/min. Filtration principle: ZYKLOMAT high-performance hydrocyclone Z1B-9/3 Separation particle size: approx. 5 µm Medium: Emulsion 3-6% Operating temperature: Ambient temperature Solid particles: approx. 5.14 m3 Operating volume max.: approx. 4.58 m3 Operating volume min.: approx. 3.60 m3 Process flow: Fully automatic full-flow filtration Sludge discharge: Fully automatic, with consistent consistency The dirty liquid is fed via customer-provided lift stations. The swarf and fine sludge produced during grinding (grinding debris, scale, corundum) are discharged via a scraper conveyor. In the upper scraper section, the sludge is pre-dried. Filtration takes place via ZYKLOMAT high-performance hydrocyclones. The system runs fully automatically. Maintenance: annual maintenance Availability: 10-2026 Double scraper tank for discharge of grinding sludge Type: KR 1.75-5.1 Total volume: approx. 5.14 m3 Volume max.: approx. 4.58 m3 Length: approx. 4,000 mm, including 70 mm stiffening Width: approx. 1,890 mm, including 140 mm stiffening Height: approx. 1,105 mm, including 100 mm base profile Neck height: approx. 2,300 mm Theoretical discharge volume max.: 15 kg/h Function: Coolant tank with integrated clean tank, sedimentation and flotation tank with fully automatic sludge discharge. 1 Bevel gear motor Voltage 400 V, 50 Hz, IP 54 as scraper drive 3 connection nozzles for return lines from three machines 1 clean liquid tank, integrated at the rear into the scraper tank. Oil-tight welded, with an internal, circumferential bevel gear, various cover plates (non-walkable plates screwed onto an angle frame), without ladder, without handrail, without internal rungs Volume max.: approx. 0.55 m3 25826

Condition: ready for operation (used), Coolant – Filter System KNOLL KF 600 / 1500 -CE marking -Coolant tank -Paper band filter -Control system – OP 3 -Coolant pumps Lrsdpfx Aeztyfdjgljr -Electrical diagrams Dimensions: L x W x H 2.4 x 1.2 x 1.5 meters / Weight 1200 kg Errors and omissions excepted.

Condition: used, Year of construction: 1984, machine/vehicle number: 0278, type of input current: three-phase, input voltage: 400 V, Mitre cold circular saw EISELE type VMS-III-S-HYD Type No. 430 Machine. No. 0278 Year of construction 1984 Sawing range at 90°: (round) Ø 120 mm Sawing area at 90°: (flat) 150 x 110 mm Sawing range at 45°: (round) Ø 100 mm Sawing range at 45°: (flat) 120 x 100 mm Saw blade diameter: 350 mm Saw blade speed: 8, 16, 33, 66 rpm. (2 gear stages + 2 motor speeds) Lredpjt A Arlofx Agljr Mitre cut 45° to the left, 90° and up to 30°(60°) to the right, infinitely variable Motor power: 2 and 2.6 kW Mains connection: 380 Volt, 50 Hz Features: - Semi-automatic vertical cold circular saw - Hydraulic material quick clamping device - Infinitely adjustable hydraulic saw blade feed - Convenient miter adjustment with fixed stops - Saw carriage on very stable rectangular guide - Convenient and stepless stroke adjustment of the saw unit via clamping lever - Generously dimensioned gearbox - with Eisele rotation compensation for long saw blade service life - Simple saw blade change - High productivity with minimum space requirement (less than 1 m²) - Coolant system in the machine base - Central lubrication (manually operated) Space requirement: 1100 x 710 x 1900 mm (L x W x H) Weight 490 kg The machine can be tested / demonstrated under power on site. All information without guarantee. Subject to prior sale. The object of purchase is sold under exclusion of any warranty. The exclusion does not apply to claims for damages arising from grossly negligent or intentional breach of obligations by the seller or for any injury to life, limb or health.

Condition: ready for operation (used), Year of construction: 2003, operating hours: 4,256 h, functionality: fully functional, turning length: 570 mm, turning diameter: 176 mm, travel distance X-axis: 245 mm, travel distance Z-axis: 570 mm, controller model: MSG-805 V, TECHNICAL DETAILS Turning diameter: 176 mm Turning length: 570 mm Swinging diameter: 510 mm Machining diameter: 420 mm Travel X-axis: 245 mm Travel Z-axis: 570 mm Rapid traverse X/Z-axis: 24 m/min Spindle bore: 43 mm Spindle speed: 60–6,000 rpm Tailstock diameter: 85 mm Tailstock travel: 120 mm MACHINE DETAILS Control system: MSG-805 V Total power requirement: 5.5 kW Dimensions & Weight Footprint: approx. 2,000 × 1,700 × 1,800 mm Machine weight: approx. 3,400 kg Operating hours: 4,256 h EQUIPMENT Integrated CNC control system Inductively hardened flat guides for bed and cross slide Continuously variable AC main spindle drive Programming of constant cutting speed Integrated cold light Power meter for main spindle drive Operator controls for automatic and manual operation CNC programming and control panel Tailstock with hydraulically actuated quill, MK 4 Continuously variable quill pressure Programmable actuation of the tailstock quill via toggle switch and M function High-dynamic three-phase servomotors for X and Z axes Backlash-free, pre-tensioned precision ball screws for X and Z axes Automatic central lubrication with electrical monitoring Coolant system with tank, pump, lines, and nozzle Electric 12-station turret system MORI SEIKI Automatic direction logic on the turret Ljdpfx Agszul Tvolsrr Direct coolant supply through the turret disk Fixed hydraulic unit for power chuck Full enclosure of the work area Front sliding door with large viewing window Electrical preparation for chip conveyor Electrical equipment according to VDE 0113 Data interface V.24 / RS-232-C Mounted control cabinet Freestanding transformer: 400 V / 200 V

Condition: ready for operation (used), Year of construction: 2003, operating hours: 28,000 h, functionality: fully functional, turning diameter: 309 mm, spindle speed (max.): 6,000 rpm, travel distance X-axis: 89 mm, travel distance Z-axis: 406 mm, controller model: Fanuc Typ 18i-T, TECHNICAL DETAILS Maximum turning diameter: 309 mm Spindle speed range: 25 – 6,000 rpm Travel in X-axis: 89 mm Travel in Z-axis: 406 mm Collet diameter: 42 mm MACHINE DETAILS Control system model: CNC Fanuc Type 18i-T Spindle motor drive power: 11 kW Operating hours: 28,000 h Machine weight: approx. 5,000 kg EQUIPMENT C-axis Lredpfx Agozu Rz Ejler Y-axis 12-station turret VDI 30 Powered tools at each station Power chuck, diameter 140 mm Hydraulic steady rest Workpiece collection system Chip conveyor Coolant system

Condition: good (used), Year of construction: 2013, Table size 3200 x 1100 mm, table load 4,000 kgs, traverses XYZ 2600 x 110 x 900mm, Spindle power 35Kw, spindle speed 10,000rpm, 30 station ATC, Spindle taper SK50, Heidenhain TNC530 Control, B axis +/- 100 degrees, rotary table 1050mm, Lsdpfxozwdtms Agljrr Through spindle coolant, swarf conveyor, probing

Condition: used, Year of construction: 1998, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 430 mm, total height: 2,150 mm, total length: 1,900 mm, total width: 1,400 mm, rotational speed (max.): 2,500 rpm, rotational speed (min.): 50 rpm, type of input current: three-phase, table length: 400 mm, table width: 800 mm, MEXPOL D40A1 Universal Tool Milling Machine with HEIDENHAIN Digital Readout and Counter Support For sale is a robust MEXPOL D40A1 universal tool milling machine, manufactured in 1998. This machine is ideally suited for toolmaking, general mechanical engineering, single-part and small-series production, as well as repair and training workshops. Lrodpfxjzfxubs Aglor The milling machine is equipped with a HEIDENHAIN ND 780 digital readout, which enables precise and convenient operation. The sturdy cross table with T-slots offers versatile clamping options. In addition, the machine features a coolant system and a counter support for supporting milling arbors during horizontal milling operations. The swiveling milling head expands the range of applications and enables flexible machining of various workpieces. The machine is in a well-maintained, used condition and was in operation until recently. Technical data: Manufacturer: MEXPOL Type: D40A1 Year of manufacture: 1998 Factory number: 50443 Machine type: Universal/Tool Milling Machine Spindle mount: SK 40 Speed range: 50 - 315 + 400 - 2500 rpm (9 steps) Feed rate range: 10 - 63 + 80 - 500 mm/min (9 steps) Travel (X / Y / Z): 600 × 400 × 430 mm Table dimensions: 800 x 400 mm T-slots: 7 pcs, 14 mm wide 3-axis digital readout: HEIDENHAIN ND 780 Coolant system Counter support Swiveling milling head Equipment: HEIDENHAIN ND 780 3-axis digital readout, swiveling Swiveling control panel Coolant system Hydraulic tool clamping Drilling quill Counter support for milling arbor operation Work light Handwheels for all axes Fold-up, all-around chip guard with gas springs Total weight: approx. 1,500 kg Machine dimensions: approx. 1900 × 1400 × 2150 mm (L x W x H) Subject to prior sale and errors.

Condition: used, Year of construction: 2016, 1) Zyklomat coolant cleaning system, application: cleaning of grinding emulsion, cleaning capacity: 350l/min, recirculation clean tank-dirty tank: 100-350l/min, max. machine supply: 250l/min, supply pressure: 3.5bar, filtration principle: ZYKLOMAT high-performance hydrocyclone Z1B-9/3, separation limit: approx. 5µm, medium: emulsion 3-6%, max. medium temperature: 50°C, solid particles: brass particles, max. solids quantity: 15kg/h, total volume: 5.14m³, operating volume: 3.6-4.58m³, process: fully automatic full-flow filtration, sludge discharge: fully automatic, with non-flowing consistency, 2) double scraper tank for grinding sludge KR 1.75-5.1, total volume: 5.14m³, max. volume: 4.58m³, length: 4,000mm, including 70mm reinforcement, width: 1,890mm, including 140mm reinforcement, height: 1,105mm, including 100mm base profile, neck height: 2,300mm, max. theoretical discharge capacity: 15kg/h, function: coolant storage tank with integrated clean tank, sedimentation and flotation tank with fully automatic sludge discharge, serviced annually, fully functional, no known defects, with documentation. An on-site inspection is possible. Ljdpszvghkofx Agljrr

Condition: ready for operation (used), Year of construction: 2018, operating hours: 14,317 h, functionality: fully functional, travel distance X-axis: 520 mm, travel distance Y-axis: 360 mm, travel distance Z-axis: 350 mm, controller model: Fanuc i, spindle speed (max.): 12,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 520 mm Travel range, Y-axis: 360 mm Travel range, Z-axis: 350 mm Spindle speed: 12,000 rpm Distance spindle to base plate: min. 150 mm / max. 500 mm Table area: 650 × 375 mm Table load: 2 × 200 kg Tool weight: max. 2.8 kg Tool magazine: 14 positions MACHINE DETAILS Control system: Fanuc i Dimensions & Weight Dimensions (L x W x H): 3,230 × 1,620 × 2,507 mm Machine weight: approx. 5,200 kg Operating hours: 14,317 h EQUIPMENT Rigid tapping – thread drilling without compensation chuck Spindle overspeed and power display Telescopic guards on the X, Y, and Z axes Rapid traverse in the X, Y, and Z axes Door safety switch 3-color indicator light Lrsdpfozul R Ijx Aglsr Work area lighting Coolant supply from a 200-liter tank via adjustable coolant nozzles at the spindle nose Internal cooling Machine cover, closed on top / Top cover Oil skimmer Pneumatic clamping system A, 1 pair per pallet Automatic work area door with safety strip Coolant system with delivery pressure: 4.5 bar

Condition: excellent (used), Year of construction: 1986, functionality: fully functional, Universal milling machine Deckel FP4M with 3-axis digital display Heidenhain in special light gray paint!!! Technical data: >> Year of manufacture 1986, machine no. 2203-2308 >> Fixed angular table >> Speed: 50 - 2500 RPM >> Feed rate: 8 – 630 mm/min >> Drive power: 3.7 / 4.4 kW Lodpfx Agozv Sdqolorr >> Spindle brake >> Rapid traverse rate: 1300 mm/min >> Travels X/Y/Z: 500/400/400 mm >> Vertical milling head on spindle head, adjustable by 150 mm >> Vertical quill and horizontal quill - SK40 >> Vertical quill extendable by 90 mm >> Clamping system M16 >> Weight approx. 1500 kg Accessories and equipment: >> 3-axis digital display Heidenhain >> Coolant system >> Chip tray >> Central lubrication About the machine: Offered is a Deckel FP4M universal milling machine in very good condition. The machine has little backlash and all spindles can be moved easily and smoothly. Even at maximum speeds, the milling machine runs smoothly. Rapid traverse in all axes. A reliable and user-friendly machine. An oil change has been performed. Mechanically and electrically inspected. The Heidenhain digital display makes the work easier and even more precise. Take advantage of the opportunity to inspect and test the machine on site while it is powered up. CE marking available for an additional charge.

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, turning length: 145 mm, turning diameter: 168 mm, travel distance X-axis: 130 mm, travel distance Y-axis: 110 mm, controller model: FANUC 31i-TA, TECHNICAL DETAILS Turning diameter: 168 mm Turning length: 145 mm X-axis travel: 130 mm Z-axis travel: 110 mm Spindle speed: 45–6,000 rpm MACHINE DETAILS Control system: FANUC 31i-TA EQUIPMENT 2 × Portal clamping system 2 × Part chute for inspected parts Lredpfezul Rujx Agler 2 × 3-jaw chuck, SMW Autoblok, Type BHM 165, 152.4 mm (6 inches) SMW Autoblok hydraulic cylinder, Type SIN-S 100, left SMW Autoblok hydraulic cylinder, Type VNK 70/37, right Chip conveyor, discharging to the rear of the machine Air-controlled part clamping monitoring, right Part clamping monitoring, on both sides 4-position spindle orientation, on both sides Coolant injection in the chuck via Deublin rotary distributor, on both sides Automatic coolant pump with 200 l tank capacity 2 × 8-station turret Signal light with traffic light design Preparation for oil mist extraction Automatic machine shutdown Automatic central lubrication RS-232-C interface External transformer 10 × Boring bar holders 3 × Turning tool holders, right 3 × Turning tool holders, left Customer macro B Turning cycles

Condition: like new (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: 25582, Equipped with: Fanuc 30ia Control Hydraulic System Coolant System Chip Conveyor Pneumatics Lube System Jib Crane Change Gears Mist Collector Transformer Work Light Stack Light Lrsdpfx Agjzn Aymsler Specifications: Extreme Ratio: 10:1 Root Angle Range (B-Axis): -5 deg. TO 90 deg. Equivalent Root Angle Range: -8 deg. to 90 deg. (Equivalent refers to cradle type machine.) Face Hobbing: Examples of Maximum Gear Pitch Diameter -35 Degree Spiral -152 mm TRI-AC Cutter w/13 Blade Groups Max. Full Depth: 0.550" Max. Face Width: 1.6" Face Milling: Examples of Maximum Gear Pitch Diameter -35 Degree Spiral -7.5" Diameter Cutter Max. Full Depth: 0.625" Max. Face Width: 1.6" Max. Swinging Base Travel (B-Axis): -5 deg. to 90 deg. Max. Vertical Travel (Y-Axis): -4" to 7" Max. Horizontal Travel (X-Axis): -6" to 4" Sliding Base Travel (Z-Axis): 2" to 12" Machine Center to Work Spindle Face (Fixed): 4.5" Tooth Number: 5 to 200 Inclusive Cutting Diameters: Conventional Face Milling: 1.1" to 7.5" Helixact: 100mm to 200mm Fine Pitch: 102mm to 152mm Coarse Pitch: 152mm only Speeds: B-Axis--Swinging Base (Degrees per Second): 30deg./sec. A-Axis--Work Spindle (Face Milling)(RPM): 0-75 A-Axis--Work Spindle (Face Hobbing)(RPM): 0-375 C-Axis--Cutter Spindle (RPM): 30-500 X-Axis--Horizontal (Inches per Second): 4.92"/sec. Y-Axis--Vertical (Inches per Second): 4.92" Z-Axis--Sliding Base (Inches per Second): 4.92"/sec. Work Spindle: Diameter of Taper at Large End (#39 Taper): 3-29/32" Taper per Foot: 39/64" Depth of Taper: 3" Floor Space: 95.75" x 63.5" Height (less mist collector): 90.75" Approx. Weight: 22,000 lbs

Condition: used, Drawing machine / stretching machine KARL KLINK RSI 2.5 EH -Pulling force 2500 kg -Stretching speed 1 mm to 9 mm/min (infinitely variable) -Stroke length 800 mm -Max. workpiece diameter approx. 250 mm -Motor power approx. 3 kW -Coolant system -Pulling force indicator -Pulling force limitation -Various guide bushings (see pictures) Lrjdjzwdrvjpfx Agler -Machine feet Dimensions: L x W x H 1.1 x 0.7 x 2 meters / Weight 1600 kg Errors and omissions excepted.

Condition: good (used), Year of construction: 2019, machine/vehicle number: 25667, Equipped with: Hydraulic Unit Sinumerik 840D sl CNC Control Slim Line Operator Panel OP012 W/12 TFT-Color Display 19" Machine Control Panel 20 Tool ATC CAPTO C6 Multifunctional Tool Carrier For Turning and Driven Tools One Fixed Tool Unit Assembled To The Compound Slide W/Coolant Thru The Turning And Drilling Tools, Coolant For The Driven Spindle From The Outside Drilling Spindle Additional Drill Spindle For Orientation Chip Conveyor Coolant Equipment -Including piping and shut-off valve and flow control switch -To supply coolant to tools for coolant and flushing through the cutting tools -To supply coolant for flushing the work piece and chuck -To supply coolant for flushing the working area Paper Band Filter Immersion Cooler High Pressure Coolant Pump, 40 Bar Through Tools Flushing Pistol, Hand Held Air Cleaner - Mechanical Separation "Mist Collector" Tool Life Display Remote Diagnostics Signal Lamp Automatic Door For Loading W/Shuttle Load and Unload Shuttle Swivel Loader Automation Cell Tuned for Part Pallet Conveyor For 20 Raw And Finished Parts Pallets Pallets Designed for Part 596500 Handling System SPC Station (Maximum O 270 mm, Maximum H 150 mm, Maximum Wt. 12 kg) NIO Station (Closing forward leading gravity) Skiving Software (Hardware: Software and user surfaces for skiving technology) Measuring Probe (For measuring diameters and length of the workpiece in the machine) Measuring Software for Teeth Measuring (MDK and Flank Line, Software and User) Measuring Program (Automatically measuring program for measure the position of the two gears to each other, after using sister tools) SPC (Every X workpieces the MDK needs to be measured) Tool Changer (Precut, measurer and final cut) Skiving Tool Identification (Hardware, software for the identification of the skiving tool after tool change) Hydraulic Diagrams Coolant Diagrams Lubrication Diagrams Electrical Wiring Diagrams Hardcopy of Diagrams CF Certificates Specifications: Workpiece Spindle: -Speed: 0-7000 l/min -Power: 55,2 - 59,7 kW Tool: Capco C6 Tool Spindle: -Speed: 0-6000 l/min -Power: 29 - 41 kW Machine Weight, Floor Space and Voltage Supply: -Operating Voltage: 400V, 3 Phases, 50 Hz -Control Voltage: 24 V -Lighting Voltage: 240 V, 50 Hz -Floor Space: 2,700 x 2,600 mm -Height: 4,000 mm -Total Weight, Approximate: 16,000 kg Longitudinal, Z-Axis: -Stroke: 800 mm -Rapid Rate: 24 m/min -Feed Force: 12 kN Transverse, X-Axis: -Stroke: 900 mm -Rapid Rate: 24 m/min -Feed Force: 12 kN Tool Spindle, B-Axis: -Range: -20 / +90 Degree Y-Axis for Spindle Unit: -Stroke: 200 mm -Rapid Rate: 12 m/min -Feed Force: 6 kN C-Axis Main Spindle: -Positioning Accurace: 9" Multifunctional Tool Carrier: -Power: 29 kW at 100% ED -Power: 41 kW at 44% ED -Torque: 141 Nm at 100% ED -Torque: 212 Nm at 44% ED Ljdpfxey Tybne Aglerr -Spindle Speed: 0-6000 min-1 -B-Axis for Stepless Motion in a Range Of: -20/+90 Degree Tool Magazine: -Maximum Tool Diameter: 100 mm -Approximate Tool Length: 300 mm -Approximate Tool Weight: 12 kg Swivel Loader: -Maximum Workpiece Diameter: 270 mm -Height: 150 mm -Weight: 16 kg

Condition: used, Year of construction: 2005, Serial Number 177554 YOM 2005 Mazatrol 640m Control EIA & Mazatrol Programming 30 Tool Magazine CAT Tooling 4th Axis Swarf Conveyor Mazak Tool length measuring unit Spindle thru coolant Ljdpfszilp Tex Aglorr UK Buyers - Price £42,000 +VAT Carriage/delivery is additional

Year of construction: 2024, condition: good (used), functionality: fully functional, We are offering this well-maintained em machines Liquid Mate Sense Premium monitoring and control system for cutting fluids, manufactured in 2024, featuring a completely new set of sensors. Manufacturer: em machines Model: Liquid Mate Sense Premium Lrjdpozm Hahofx Agljr Year of manufacture: 2024 Condition: good Category ID: 661 Type: Monitoring and control of cutting fluids The LiquidMate Sense Premium is an innovative, standalone plug-and-play solution for fully automated monitoring and control of cutting fluids in individual machines and central systems. It precisely measures concentration, pH value, and temperature, monitors the fill level, and actively regulates the cutting fluid. A major advantage is the circulation monitoring, which ensures regular movement of the cutting fluid and prevents bacterial growth and fungal contamination. The solution is low-maintenance, easy to install, and offers versatile connectivity, including an integrated online dashboard for convenient remote monitoring. LiquidMate is CE and UKCA certified and works with all common cutting fluids, contributing to environmentally friendly and cost-effective operation. If you have any questions or require further information, please send us a message or call us. We have 11 of these units available, and the machines can also be inspected. We can also offer them as a package.

Condition: good (used), Year of construction: 2012, functionality: fully functional, tank capacity: 4,000 l, pump capacity: 2,000 l/min, coolant tank capacity: 4,000 l, delivery pressure: 4 bar, RESY central filtration system, 2 x KBF 1001/2000 Year of manufacture: 2012 Total volume: 4,000 liters Filtration: Filter fleece System: 2 x 62/1000-KBF10001/2000-9.5-0 System flow rate: 2000 l/min (1000 l/min + 1000 l/min) System volume: 19 cubic meters (9.5 + 9.5 cubic meters) Supply capacity: 2000 l/min at 4 bar, medium: emulsion Filter system: 2 x KBF 1001/2000, filter principle: compact belt filter Purity: 20 microns Filter flow rate: 2 x 1000 l/min (system-specific) Heating: 0 kW Cooling: 0 kW Machines: 8 cylindrical grinding machines, material: chrome-plated steel, cast iron, operating mode: fully automatic Color: RAL 7016, voltage: 400 V, frequency: 50 Hz The system was only in operation for a short period due to a relocation of production. Now, the site is to be rebuilt. Lodszbvpispfx Aglerr Further technical data available upon request.

Condition: good (used), Year of construction: 2004, Overall dimensions: 3300 x 2100 x 2200 mm Lodpfsiuxmvox Aglsrr Year of manufacture: 2004 Processing and filtering capacity: 700 l/min Filter fineness: 40 ppm > 20 µm Filling volume: 7250 l Pump capacity: 7,5 kW; 550 l/min; 5 bar