Used Dmg Milling for sale (376)

Condition: ready for operation (used), Year of construction: 2016, operating hours: 38,452 h, controller manufacturer: SIEMENS, controller model: 840D, spindle speed (max.): 24,000 rpm, This 3-axis DMG MILLTAP 700 was manufactured in 2016. It features a 24,000 rpm spindle, 60 m/min rapid traverse, and a quick tool change system. Equipped with a Siemens 840D control and a Renishaw 3D probe, it offers precision and efficiency. Consider the opportunity to buy this DMG MILLTAP 700 vertical machining centre. Contact us for more information about this machine. Additional information • Quick tool change • Tool breakage detection • 25 tool positions • Renishaw 3D probe • AFS extraction system • High pressure • Belt filter system • Rapid traverse speed: 60 m/min Bedox D Nkkopfx Apbelh

Condition: ready for operation (used), Year of construction: 2010, operating hours: 17,250 h, functionality: fully functional, travel distance X-axis: 710 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 520 mm, controller model: Heidenhain Mill Plus, spindle speed (max.): 18,000 rpm, In 2015, a new spindle was installed! TECHNICAL DETAILS Travel range X-axis: 710 mm Travel range Y-axis: 520 mm Travel range Z-axis: 520 mm Maximum spindle speed: 18,000 RPM Number of tool magazine slots: 30 Tool holder: SK40 Distance between T-slots: 63 mm Rotational speed of the 4th axis max.: 40 RPM Rotational speed of the 5th axis max.: 40 RPM Blodpfx Apey Thlnoboh 4th axis swivel range: 360 x 0.001 degrees 5th axis swivel range: 0 ± 102 x 0.001 degrees MACHINE DETAILS Control system model: Heidenhain - Mill Plus Operating hours: currently 36,500 hours Spindle hours: currently 17,250 hours EQUIPMENT Programmable coolant nozzles Coolant gun Chip conveyor 40 bar internal coolant system with 600 l paper filter system Measuring probe 3D Quickset Laser tool measurement Visiport Handwheel Signal light Operating mode 4

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 450 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 460 mm, controller model: HEIDENHAIN ITNC 530, spindle speed (max.): 28,000 rpm, TECHNICAL DETAILS Number of axes: 5 Travel range, X-axis: 450 mm Travel range, Y-axis: 650 mm Travel range, Z-axis: 460 mm Swivel angle (A-axis): -10 / +110 ° Tool magazine Number of positions: 60 Maximum tool diameter: 80 mm Maximum tool length: 250 mm Maximum tool weight: 6 kg Tool holder and spindle Tool holder: HSK 63 Minimum spindle speed: 2 rpm Maximum spindle speed: 28,000 rpm MACHINE DETAILS Operating time according to counter: 94,552 h Operating hours according to counter: 24,219 h Connection voltage: 400 V Spindle power: 38 / 28 kW Total power consumption: 70 kVA Dimensions & Weight Bsdpfxozaqhqe Apbjlh Dimensions (L x W x H): 3,210 x 2,930 x 2,900 mm Machine weight: approx. 9,500 kg

Condition: excellent (used), Year of construction: 2016, operating hours: 10,800 h, functionality: fully functional, travel distance X-axis: 2,600 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 900 mm, rapid traverse X-axis: 80 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 60 m/min, feed rate X-axis: 80 m/min, feed rate Y-axis: 60 m/min, feed rate Z-axis: 60 m/min, workpiece weight (max.): 4,000 kg, spindle speed (min.): 20 rpm, spindle speed (max.): 10,000 rpm, operating hours of spindle: 10,800 h, spindle nose: HSK 100, number of slots in tool magazine: 60, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, DMG MORI DMF 260/11 with CELOS and Siemens 840D SL Operate in well-maintained condition. Technical data can be found in the appendix. Equipment / Features: - Siemens 840DSL Operate with Celos - HSK 100 motor spindle with 10,000 rpm - Linear drive - 5-axis - IKZ 40 bar / 600 liters - Chip conveyor - Coolant nozzle - Measuring probe - B-axis - Recessed C-axis The machine is being sold on behalf of a customer and will be available from 10/2026. Bledezbacaspfx Apbsh We guarantee full functionality and geometry within new machine tolerances upon acceptance at the customer's site / commissioning at your location. We will gladly plan the delivery, loading, transport, and commissioning for you, all from a single source, with our qualified service technicians. Please contact us. We are not a traditional machine dealer but support our customers in the search for and sale of high-quality used machines throughout the entire process. (Inspection, purchase, refurbishment, transport, disassembly, loading, etc.) Everything from a single source, with a guarantee and transparent processes. If you are also looking for a used DMG MORI machine or want to sell your machine in the best possible way, please do not hesitate to contact us.

Condition: used, Year of construction: 2002, travel -x axis 3.000 mm Bodpfx Aey A Tb Hjpbelh travel -y axis 560 mm travel -z axis 720 mm control Siemens - 840D number of spindle speeds 18.000 U/min numbers of positions in the tool changer 100 tool taper HSK 63 Milling machining centers - vertical | DMG - DMF 300 Linear The machine has exclusively processed aluminum and is in a well-maintained condition. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: DMF300Linear | DMF300 | DMF-300 Linear | DMF-300Linear

Condition: used, Year of construction: 2002, travel -x axis 3.000 mm travel -y axis 560 mm Bjdpfxey A Tbto Apbolh travel -z axis 720 mm control Siemens - 840D number of spindle speeds 18.000 U/min numbers of positions in the tool changer 100 tool taper HSK 63 Milling machining centers - vertical | DMG - DMF 300 Linear The machine has exclusively processed aluminum and is in a well-maintained condition. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: DMF300Linear | DMF300 | DMF-300 Linear | DMF-300Linear

Condition: ready for operation (used), Year of construction: 2022, operating hours: 1,030 h, spindle speed (max.): 4,000 rpm, travel distance X-axis: 260 mm, travel distance Y-axis: 120 mm, travel distance Z-axis: 800 mm, spindle motor power: 22,000 W, total height: 2,100 mm, total width: 1,900 mm, overall weight: 5,900 kg, controller manufacturer: SIEMENS, controller model: SINUMERIK 840 D, product length (max.): 4,400 mm, number of axes: 4, This 4-axis DMG MORI CLX 450 V4 was manufactured in 2022. It features a maximum turning diameter of 400 mm and a turning length of 800 mm. The machine is equipped with a Siemens Sinumerik 840D control and includes a turret with 12 stations, all with driven tools. If you are looking to get high-quality turning capabilities, consider the DMG MORI CLX 450 V4 CNC turning center we have for sale. Contact us for further details. • Working range: • Max. turning diameter: 400 mm • Max. turning length: 800 mm • Swing over cross slide: 320 mm • C-axis: full interpolation • Main spindle: Bljdjzbcp Nspfx Apbeh • Spindle nose: A8 • Spindle motor power: approx. 22/18 kW • Turret and tools: • Turret: 12 stations • All stations with driven tools • Performance: • Rapid traverse (X/Y/Z): approx. 24 / 10 / 30 m/min • Equipment: Tailstock • Power supply: 400 V / 50 Hz • Condition: Checked by DMG service before disconnection; very good condition with all functions working properly. Service report available for review. Additional equipment • Turning tools installed on the machine and included in the offer. Technical Specification Counter Spindle No Driven Tools Yes

Condition: excellent (used), Year of construction: 2009, x-travel 500 mm y-travel 450 mm z-travel 400 mm control Siemens 840 D tool adaptor SK 40 spindle turning speed - stepless 2 U/min feed speeds mm/min tool change unit 16 surface area 700 x 500 mm workpiece weight max. 500 kg weight of the machine ca. 4,4 t Overall size 2,8 x 2,6 x 2,5 mm Full coverhing/ housing cooling device Bljdpfx Apjzawmajboh only about 1.500 h

Condition: used, Year of construction: 2022, controller manufacturer: Siemens, controller model: 840 DSL - Celos, _____ Description: Year of manuf. : 2022 Control : Siemens 840 DSL - Celos Speed : 20000 rpm Movement X/Y/Z : 2600/1100/900 mm Tool holder : SK 40 In General: Year of manufacture:2022 Control system:Siemens 840 Dsl - Celos Travel ranges X/Y/Z:2,600/1,100/900 mm Spindle speed:20,000 rpm Tool holder:SK 40 Spindle: Technology:Direct drive spindle Speed:20,000 rpm Max. power:35 kW Max. torque:120 Nm Tool holder:SK 40 NC swivel head: Technology:Swivel axis (B-axis) Bedpfx Apjzbgcgobslh Travel range:+/- 100° Work table: Technology:Fixed table with integrated NC rotary table Total clamping area:3,200 x 1,100 mm Total table load capacity:4,000 kg/m Clamping area of NC rotary table:1,050 mm Max. table load capacity of NC rotary table:1,200 kg/m C-axis:360° Tool magazin: Technology:Chain magazine Number of stations:120 Tool changer:Double gripper with ATC shuttle Max. tool diameter:130 mm Max. tool length:300 mm Equipment: Position measurement systems:Direct on all axes (glass scales) Chip removal:Chip conveyor Coolant supply:CTS system, 80 bar Tool measurement:BLUM laser Workpiece measurement:Heidenhain TS 460 Kinematics measurement:3D quickSET ready Emulsion mist separators:2 units, mechanical Process monitoring:Operating mode 4 Set-up mode:Electronic handwheel

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, DMG MORI ecoMill 600 V Year of manufacture: 2016 Control unit: SIEMENS 840D Travels: 600 x 560 x 510 mm Bledpfeza Abcex Apboh Table size: 900 x 560 mm Spindle mount: SK40 Max. spindle speed: 12,000 rpm Tool changer: 30 positions Total weight: 5,000 kg Various accessories

Condition: ready for operation (used), Year of construction: 2015, operating hours: 6,361 h, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 510 mm, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, rapid traverse Z-axis: 30 m/min, controller manufacturer: Siemens, controller model: 840D ShopMill, workpiece length (max.): 900 mm, workpiece width (max.): 560 mm, workpiece height (max.): 630 mm, workpiece weight (max.): 600 kg, total height: 3,000 mm, total length: 4,000 mm, total width: 5,000 mm, table width: 900 mm, table length: 560 mm, table load: 600 kg, overall weight: 5,000 kg, spindle speed (max.): 12,000 rpm, operating hours of spindle: 6,361 h, spindle nose: SK40 (DIN69871), number of spindles: 1, number of slots in tool magazine: 30, input voltage: 400 V, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, We have acquired this Japanese DMG MORI ecoMill 600V directly from production and it is in very good condition. The CMX 600V (ecoMill 600V) features a C-frame design (classic configuration) and a movable table (X-axis), which makes it suitable for general/all-round milling tasks. Additional options & accessories: - Siemens 840D SlimLine including 3D simulation. Bljdpfx Apey Dg Euobjh - PROGRESSLine (indicates the remaining production time and quantity for a complete machining process). - Chip conveyor - Rinsing gun - Preparation for internal cooling - Original documentation

Condition: ready for operation (used), Year of construction: 2004, operating hours: 31,960 h, controller manufacturer: HEIDENHAIN, number of axes: 2, This 2-axis DMG GILDEMEISTER CTX 320 linear V3 was manufactured in 2004. A versatile turn-mill centre, it offers robust construction and precision for complex machining tasks. If you are looking to get high quality turning and milling capabilities consider the DMG CTX 320 linear V3 machine we have for sale. Contact us for more information. Additional equipment • Bar package with a pick-up device and parts conveyor belt • Bar guide for 1.5 metre bars and workpiece stop • Hainbuch SK 65 clamping top • Indicator light for machine's operating status • Cooling unit for air conditioning the control cabinet • OPTIONAL: A basic tool kit / A large selection of Hainbuch SK 65 clamping heads Machine Benefits Technical Machine Benefits • 12-position tool turret with driven tools at all stations Extra Information Bedpfsx Nr T Uex Apbolh Machine still under power

Condition: ready for operation (used), Year of construction: 2005, operating hours: 37,064 h, travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,000 mm, controller manufacturer: SIEMENS, controller model: 840D powerline + Shopmill, spindle speed (max.): 8,000 rpm, spindle motor power: 44,000 W, number of axes: 5, This 5-axis DMG DMC 100 H was manufactured in 2005. It features a Siemens 840D powerline control with Shopmill, a 1,000 mm travel in X, Y, and Z axes, and a speed range up to 8,000 rpm. The machine includes a HSK 100 tool holder, 270/360 tool positions, and two 800 x 800 mm pallets. Consider the opportunity to buy this DMG DMC 100 H horizontal machining centre. Contact us for more information. Additional equipment • Electronic handwheel • Operating mode 4 • Oil mist extraction • Internal cooling (IKZ): 40 bar • Paper band filter • Chip flushing gun Machine Benefits Technical Machine Benefits • Number of pallets: 2 Blodpeyaaugofx Apboh • Pallet size: 800 x 800 mm • Tool positions: 270 / 360 • Measuring probe: renishaw omp 60 • Spindle power: 44 kW (40% duty cycle) or 32 kW (100% duty cycle) • Maximum torque: 1241 Nm (40% duty cycle) or 827 Nm (100% duty cycle) Extra Information Machine still under power

Condition: ready for operation (used), Year of construction: 2006, operating hours: 15,869 h, travel distance X-axis: 1,035 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 510 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530 E, spindle speed (max.): 12,000 rpm, number of axes: 4, This 3-axis DMG DECKEL MAHO 1035V was manufactured in 2006. It features an X-axis travel of 1,035 mm, Y-axis travel of 560 mm, and Z-axis travel of 510 mm. The machine is equipped with a Heidenhain iTNC 530 control unit and has a tool magazine capacity of 30 positions. If you are looking to get high-quality machining capabilities, consider the DMG DECKEL MAHO 1035V vertical machining centre we have for sale. Contact us for further details. - PLC Software-Nummer: 4B0000_HEDR_02C- Development status: L3- DSP1: 340514 03.1- ICTL1: 340517 01- Control On Time: 40,697 hours- Machine On Time: 38,700 hours- Program Run Time: 15,863 hours- 1st Axis Reference Point Time: 14,213 hours / 15,835 hours- Tool Changer Cycles Time: 1,585 hours- Spindle Taper: SK 40- Tool Magazine Capacity: 30 positions (Chain type)- Touch Probe: Heidenhain TS640- Electronic Handwheel: Heidenhain- Power Capacity: 35 kVA- Maximum Nominal Current (A Jn max): 50 A- Fuse / Input Current: 63 A- Mains Voltage: 400 V- Frequency: 50/60 Hz- Control Voltage: 230 V- Direct Current Supply: 24 V- Central Lubrication System: Vogel pump unit utilizing Divinol Lithogrease 000 fluid grease- Pneumatic Regulation Assembly: Integrated SMC / Festo air filtration and regulation unit Blodpfxsy Uvnyj Apbeh

Condition: defective spare-parts repository (used), Year of construction: 2000, 5-axis machining center DMG Type:DMU125 P Year 2000 Control Heidenhain TNC430 Machine with HV milling head and NC swivel rotary table. Spindle holder ISO 50 Blsdpfx Apeuwnzvebeh Spindle speeds up to : 8000 rpm Travel X 1250 mm Y 880 mm Z 800 mm A-axis and B-axis Tool magazine pos.120 . Machine documentation available Machine is not ready for use without chip conveyor .

Condition: good (used), Year of construction: 1993, CNC universal milling machine DMG MORI Type: MH 600 C Control MAHO 532 year 1993. with automatic swivel milling head G17/G18 and B -axis rotary table. Without tool changer. Further data see data sheet. Complete machine documentation and data backup available. Bjdpfx Aeiihxhepbjlh Good general condition.

Condition: ready for operation (used), Year of construction: 2012, operating hours: 27,000 h, travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 1,000 mm, overall weight: 21,000 kg, spindle speed (max.): 18,000 rpm, number of axes: 5, This 5-axis DMG MORI DMC 100U duoBlock was manufactured in 2012. It features a pallet clamping surface of 1000 × 800 mm, rapid traverse rates up to 60 m/min, and a high-speed spindle at 18,000 rpm. The machine includes a 60-position tool changer and a 980-litre coolant system. Accessories like a chip conveyor, oil mist collector, and BLUM laser tool measurement enhance its functionality. If you are looking to get high-quality milling capabilities consider the DMG MORI DMC 100U duoBlock machine we have for sale. Contact us for more information. • Working table: • Number of pallets: 2 (working/preparation area) • Pallet clamping surface: 1000 × 800 mm • Pallet weight: 630 kg • Axis travels: • B: 210° • C: 360° • Movements: • Acceleration (X/Y/Z): 7.0 / 6.5 / 6.5 m/s² • Resolution (X/Y/Z): 0.001 mm • Position tolerance (X/Y/Z): 0.006 mm • Position tolerance (A/B/C): 8 / 6 / 5 arcsec • Workpiece capacity: • Max diameter: 1000 mm • Max height: 1600 mm • Max weight: 2000 kg • Spindle: • Torque: 119 Nm (40% ED) • Tool changer: 60 positions • Coolant system: 980-litre high-pressure through-spindle with paper band filter • Availability: In excellent condition, available for demo (video available) Additional equipment • 7 extra pallets • Chip conveyor • Oil mist collector Bledpfxox D Eh Es Apboh • Infrared measuring sensor • BLUM laser tool measurement • 3D Quick Set preparation • Cooling unit • Air blast through spindle • Maintenance kit (filters, wipers, installation tools) • Full manuals (English, Estonian, and digital copy)

Condition: used, Year of construction: 2012, functionality: fully functional, travel distance X-axis: 1,035 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 560 mm, controller manufacturer: Siemens, controller model: 810D, table width: 600 mm, table length: 1,200 mm, spindle speed (max.): 10,000 rpm, operating hours of spindle: 7,600 h, Equipment: chip conveyor, rotational speed infinitely variable, Very nice DMC 1035 V ECO with Siemens control system Blodpfx Aex Dci Topbeh Year of manufacture: 2012 Program run hours: 7,600 h SK 40 with 10,000 rpm spindle 30-position tool changer Production package with measuring probe and tool length measuring device in the work area Internal cooling Chip conveyor Available immediately.

Condition: ready for operation (used), Year of construction: 2015, operating hours: 43,196 h, functionality: fully functional, travel distance X-axis: 165 mm, travel distance Y-axis: 80 mm, controller model: Fanuc 310 is, spindle speed (max.): 5,000 rpm, counter spindle speed (max.): 5,000 rpm, No minimum price – guaranteed sale to the highest bidder! CNC turning center with comprehensive accessories! A wide range of like-new spare parts is also available! TECHNICAL DETAILS Travel X1 axis: 165 mm Travel X2 axis: 165 mm Travel Y1 axis: 80 (+50 / -30) mm Travel Z1 axis: 678 mm Travel Z2 axis: 640 mm Travel W2 axis: 690 mm Rapid traverse X/Y/Z/W axis: 30 m/min Acceleration X/Y/Z/W axis: 5 m/s² Main and counter spindle Power main spindle: 20 / 25 kW Power counter spindle: 17 kW Speed main spindle max.: 5,000 rpm Speed counter spindle max.: 5,000 rpm Bar diameter main spindle max.: 65 mm Bar diameter counter spindle max.: 45 mm Number of turrets: 2 Number of rotating tools per station: 12 driven positions Tool system: VDI 30 Speed driven tools: max. 4,000 rpm MACHINE DETAILS Control: Fanuc 310 is Coolant tank capacity: approx. 650 l Bljdoza Alhepfx Apbeh Coolant pump capacity per turret: max. 20 l/min Pump pressure: 7 bar Connected power: 91 kVA Dimensions & Weight Machine dimensions (L x W x H): 4,500 x 1,990 x 2,300 mm Machine weight: approx. 9,500 kg Operating hours Power-on hours: 64,274 h Operating hours: 43,196 h EQUIPMENT IEMCA MASTER 865 MP 43 L bar loader Drive for slides 1 and 2, all 12 positions C-axis for main and counter spindle Y-axis for slide 1 Chip conveyor, belt type Counter spindle collet cleaning with coolant Workpiece discharge including belt Mechanical preparation for oil mist filter Electrical and software interface for bar loader Angular synchronization between main and counter spindle Automatic machine shutdown 2 additional inputs/outputs, 4 M-functions Thread drilling without compensation chuck Piece and time counter Software for polygonal turning for slides 1 and 2 Constant cutting speed Helical interpolation for slide 1 Spindle speed monitoring Four-color warning light Cooling unit for control cabinet Collet chuck type MPF 65/140 without axial feed for main spindle, max. diameter 65 mm Manual collet changer type SACO MPT65/140 and MPF65/140 Differential pressure for counter spindle with the possibility of setting two different clamping pressures 1 set of soft jaws for collet chuck type SMW 175-BBD Collet chuck type SMW 175-BBD for counter spindle including adapter for spindle adjustment Tool wear monitoring system for CNC FANUC Sister tool selection system for Tool Monitor CNC FANUC External flushing of jaws and collets with coolant on main and counter spindle

Condition: used, Year of construction: 2001, machine/vehicle number: IntNr231491, Manufacturer: DECKEL MAHO, Model: DMF 220 linear, Year of manufacture: 2001 Control system: Siemens 840D Powerline Travel and Axes X-axis (longitudinal): 2,200 mm Y-axis (transverse): 560 mm Z-axis (vertical): 720 mm Rapid traverse X/Y/Z: 50 m/min X-axis drive: High-dynamic linear drive Work Table Clamping surface: 2,600 x 600 mm Max. table load: 2,200 kg Main Spindle Speed range: 20 - 12,000 rpm (standard) Drive power (100% duty cycle): 35 / 25 kW (S1/S6) Max. torque: 130 / 87 Nm (at 100% duty cycle) Tool holder: SK 40 according to DIN 69871 Tool Changer Bljdpfx Apjy U Hklobsh Number of stations: 30-position magazine Tool change time (chip-to-chip): approx. 4-6 seconds (depending on model) Dimensions & Weight Space requirement approx.: 6,500 x 3,500 mm Machine weight approx.: 12.5 t The machine can be inspected under power by appointment. Technical data and specifications subject to change and error; prior sale reserved! Refurbished 5-axis CNC machining center Deckel MAHO DMF 250 linear in good condition. Year of manufacture: 2004. Control: Heidenhain iTNC 530. Technical data: X travel: 2,500 mm. Y travel: 920 mm. Z travel: 820 mm. B-axis: x/- 105° Worktable: 3,100 x 900 mm Spindle interface: HSK 63 Spindle speeds: 20 - 18,000 rpm Tool changer: 30 positions Equipped with: - Chip conveyor - Through-spindle coolant 40 bar - Operating manual Country of origin: Germany Motor power: 35 kW Machine dimensions (LxWxH): 6,000 x 3,800 x 2,950 mm Machine weight: 25,000 kg The machine can be viewed by appointment. Technical data and specifications subject to change and error, as well as prior sale!

Condition: used, Year of construction: 2012, operating hours: 20,000 h, machine/vehicle number: IntNr231536, High-end CNC turning centre with 2 turrets, 2 Y-axes and IRCO bar feeder Control: SIEMENS 840D SolutionLine with ShopTurn interface Year of manufacture: 2012 Spindle hours: 20,000 Maximum turning diameter: approx. 390 mm Maximum turning length: 1,250 mm Bar capacity: 76 mm (standard) X-axis travel: 300 mm Bledpfsy U Hkfox Apbjh Z-axis travel: 1,250 mm Y-axis travel: +/- 60 mm (both turrets) Spindle specifications: Speed: up to 5,000 rpm Drive power: 34 kW (40% duty cycle) Torque: up to 380 Nm 4-axis kinematics 2 x 12-position turrets (all stations suitable for driven tools) Speed up to 6,000 rpm, power 11.3 kW Gear cutting software, including specialised tool holders for gear hobbing/cutting. IRCO MUK short bar loader Hinged belt chip conveyor 20 bar high-pressure coolant system with paper belt filter Subject to prior sale. Specifications subject to change and errors excepted!

Condition: used, Year of construction: 2004, operating hours: 145,113 h, machine/vehicle number: IntNr231565, For sale: Highly dynamic CNC production turning center Gildemeister Speed 12-5 with IEMCA Smart 316 bar feeder Year of manufacture: 2004 Control: Fanuc 16i-TB Technical data MAIN SPINDLE - Max. bar diameter: 12 (15) mm - Travel: 120 mm - Spindle speed: 12,000 rpm - Spindle drive power: 3.7 kW - Torque: 6 Nm COUNTER SPINDLE - Max. bar diameter: 12 (15) mm - Spindle speed: 12,000 rpm - Spindle drive power: 3.7 kW - Torque: 6 Nm Driven tools: - Tool drive power: 1.1 kW - Max. speed: 6,000 rpm Tools: - Number of tools: up to 20 (some driven) - Driven tools: 4–6, for milling, drilling, and threading operations - Tool holder: ER collet chucks or similar systems - Rear machining: 4 stations for backworking IEMCA Smart 316 / 32L bar feeder Year of manufacture: 2006 Bar diameter: 5–32 mm Bar length: 3,200 mm Small extinguishing system / Kraft & Bauer fire suppression system Operating manual Parts separator Chip conveyor system Bsdpfx Ajy U Hh Djpbolh The machine can be inspected under power by appointment. Subject to technical changes and errors, as well as prior sale!

Condition: used, Year of construction: 2019, operating hours: 23,121 h, machine/vehicle number: 14505774804, Catalog No.: 1.1, chip conveyor, HEIDENHAIN TNC-640 control system (5 axes/simultaneous), 60-position tool changer SK40, table surface/simultaneously controllable rotary table: 630x500 mm, max. table load: 200 kg, travel ranges X/Y/Z: 650/520/475 mm, direct measuring systems for B- and C-axes, plane transformation, connection to central oil mist extraction system, external programming option via Mastercam, with 1 workpiece automation system from HALTER, type: LoadAssistant U-35, year of manufacture: 2019, serial number: DCH0284, item code: X92850, sales order no.: DS09801, with 3D robot Assistant Automation S180-20 handling robot from FASTEMS, subject to prior sale. Bledpoy T Nxpofx Apboh

Condition: used, Year of construction: 2021, operating hours: 14,800 h, machine/vehicle number: 14505787934, Catalog No.: 1.6, with automatic loading, DMG MORI DMU 50, control system HEIDENHAIN TNC-640 (5 axes/simultaneous), tool holder SK40, clamping surface/simultaneous rotary table: 630x5,000 mm, max. table load: 200 kg, travel distances X/Y/Z: 650/520/475 mm, special features: direct measuring systems for B and C axes, plane transformation, connection to a central oil mist extraction system, external programming option via Mastercam, chip conveyor, subject to prior sale. Bedpfx Asy T Nwlepbelh

Condition: used, Year of construction: 2020, operating hours: 17,031 h, machine/vehicle number: 00830004341, Catalog No.: 2.2, as a twin-spindle machine, SIEMENS 840D sl Operate control system, max. speed of turning and milling spindle: 10,000 rpm, max. drive power: 20 kW, max. torque: 120 Nm (100% ED), largest turning diameter: 360 mm, largest turning length: 1,200 mm, bar capacity: 102 mm, Capto C6 tool changer, tool magazine chain with 80 magazine positions, Y-axis travel: +/- 120 mm for eccentric machining, swivel range of the B-axis: +/- 110°, special equipment: hydraulic self-centering steady rest (25-199 mm), counter-spindle with tailstock function, fine chip removal system for cast iron machining, groove milling function, connection to central oil mist extraction system, external programming option via Mastercam, chip conveyor, subject to prior sale. Blsdpfxoy T Nw Ej Apboh