Used Valve for sale (6,561)

Condition: used, machine/vehicle number: FN535356, Year of construction: 2017, operating hours: 3,483 h, load capacity: 3,500 kg, lifting height: 3,600 mm, fork length: 1,800 mm, Equipment: UVV, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 3,500 kg Lifting height: 3,600 mm Fsdpfx Alsz Iwrho Uegh Fork length: 1,800 mm MACHINE DETAILS Mast type: Duplex mast Drive type: LPG Dimensions & Weight Dimensions (L x W x H): 5,700 x 1,300 x 2,420 mm Own weight: 4,896 kg UVV certification valid until: 05/2027 Next service due in: 516 hours Starter battery: new in 05/2027 Operating hours: 3,483 hours EQUIPMENT Former Jungheinrich full-service unit Side shifter Free-lift mast without center hydraulic cylinder 3rd valve Full cabin Heater Windshield wiper LED work light (front) LED work light (rear) Comfort seat LPG cylinder exchange system All dimensions are rounded values. No warranty is given for typing or measurement errors. Collection conditions: Lateral loading up to 6 tons is possible with a large forklift on site. Loading is at your own risk. Rear loading via ramp is possible for truck heights of 100–150 cm, up to 15 tons, and up to a width of 230 cm. Collection is only possible after receiving payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If collection is not carried out on time, a storage fee of €20 per machine per day will be charged. Outstanding storage fees must be paid in full before collection. Lot number: 172

Condition: used, machine/vehicle number: H2X386J03885, Year of construction: 2018, operating hours: 7,399 h, load capacity: 2,000 kg, lifting height: 4,625 mm, fuel type: electric, fork length: 1,200 mm, No minimum price – guaranteed sale to the highest bidder! Fodpfxjz Iwq Do Al Usgh TECHNICAL DETAILS Lifting height: 4,625 mm Load capacity: 2,000 kg Fork length: 1,200 mm MACHINE DETAILS Mast design: Triple mast Drive type: Electric Battery voltage: 48 V Battery capacity: 775 Ah Battery type: 5 PzS Battery year of manufacture: 2018 Measured idle voltage: 50.4 V Battery equipment: Aqua + EUW Dimensions & Weight Dimensions (L x W x H): 3,200 x 1,150 x 2,100 mm Own weight: 4,000 kg Operating hours according to display: 7,399 h EQUIPMENT Former Linde full-service unit 3rd additional valve: with side shifter 4th additional valve: present, available for fork positioner Free lift Side shifter Full cab Cab heater Windshield wiper Comfort seat LED work light, front LED work light, rear Road traffic lighting with turn signals Orange warning light Safety Light, front Safety Light, rear Note: Occasional error message displayed All dimensions are approximate. No guarantee is given for typographical or measurement errors. Collection conditions: Side loading up to 6 tons is possible with a large forklift on site. Loading is at your own risk. Rear loading via ramp is possible for truck heights of 100–150 cm, up to 15 tons and up to a width of 230 cm. Collection is only possible after receipt of payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If collection is not carried out within the stipulated time, a storage fee of €20 per machine and day will be charged. Any outstanding storage fees must be paid in full before collection. Lot number: 161

Condition: used, Year of construction: 2015, operating hours: 12,091 h, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 8,000 kg Lifting height: 5,450 mm Mast: Triplex mast with full free lift Fork length: 2,000 mm Fork adjustment: Hydraulically adjustable MACHINE DETAILS Machine type: Diesel forklift UVV certificate valid until: 05/2027 Dimensions & Weight Dimensions (L × W × H): 6,300 × 2,400 × 3,200 mm Dead weight: 15,000 kg Operating hours: 12,091 h EQUIPMENT 3rd and 4th valve Formerly a Linde full-service unit Full cabin Heater Windshield wiper LED work light front LED work light rear Safety light rear Comfort seat Lumbar support Seat heating If requested, a mast that is too high can be disassembled for transport and loaded accordingly. All dimensions are approximate values. No guarantee is given for typing or measurement errors. Collection conditions: Fgedpfsz Iwi Hex Al Uoh Lateral loading up to 6 t is possible with a large forklift on site. Loading is at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 t and up to a width of 230 cm. Collection is only possible after receipt of the payment confirmation by email. Collection without prior notification from Monday to Friday between 07:00 and 16:00. If collection is not carried out on time, a storage fee of €20 per machine per day will be charged. Outstanding storage fees must be paid in full before collection. Lot number: 3

Condition: used, machine/vehicle number: E11401004015, Year of construction: 2019, operating hours: 3,410 h, load capacity: 10,000 kg, lifting height: 3,500 mm, fuel type: diesel, fork length: 1,200 mm, Equipment: UVV, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 10,000 kg Lifting height: 3,500 mm Fork length: 1,200 mm Fork cross-section: 145 x 90 mm Fork radius: 105 mm Fork adjustment range: 0 to 1,980 mm MACHINE DETAILS Drive type: Diesel Number of wheels: 6 Fgsdpsz Iwimsfx Al Uoh Dimensions & Weight Dimensions: 5,600 x 2,550 x 3,155 mm Own weight: 17,510 kg Protective roof height: 3,000 mm UVV certification valid until: 08/2027 Starter batteries renewed: 01/2025 Operating hours: 3,410 h EQUIPMENT Former Linde full-service unit 3rd and 4th hydraulic valve Hydraulic fork adjuster Side shifter Full cab Air conditioning Heater Windshield wiper Multi-function display with touch function LED work light, front LED work light, rear Road traffic lighting with turn signals Additional work lights Rotating beacon Safety light, rear Motec camera with view of the fork tip (currently not functioning) Air-suspended comfort seat Comfort seat can be swivelled 17° to the right If the mast is too high, it can be disassembled for transport upon request and loaded accordingly. All dimensions are approximate values. No guarantee is given for typographical or measurement errors. Collection conditions: Lateral loading up to 6 t possible with a large forklift on site. Loading is at your own risk. Rear loading via ramp possible with a truck height of 100–150 cm, up to 15 t and up to a width of 230 cm. Collection is only possible after receipt of the payment confirmation by email. Collection without prior notification from Monday to Friday between 07:00 and 16:00. If collection is not made within the specified timeframe, a storage fee of €20 per machine per day will be charged. Outstanding storage fees must be paid in full before collection. Lot number: 1

Condition: used, Year of construction: 2004, machine/vehicle number: PMPM000167, for Sparkling wine, wine and other beverages with CO2 Fjdpfx Aloz Ri T Re Usgh Sekt, Wein und andere Getränke mit CO2. Rinsing Machine NOVA 20/1050 Counterpressure filler ELETTRA 1400/23 with 28 filling valves Capper-cork Machine DELTA 804 Eletrical Panel Pre-evacuation Pump Bottle format parts 375ml to 1500ml

Year of construction: 2022, condition: used, functionality: fully functional, MIX s.r.l. ATEX dust collection filter unit, dust separator, and rotary airlock Receiving filter + hopper, type A-SELD, size 5B12 Year of construction: 2022 Filter housing diameter: approx. 950 mm Filter surface area: approx. 11 m2 Equipped with pneumatic filter cleaning, Hoerbiger explosion pressure relief, and Vaga Wave S61 level indicator Rotary airlock at the bottom: MD200 EX Details Brand: MIX s.r.l. Description: ATEX Filter unit Type: A-SELD Dimensions Approx. 115 x 110 x 300 cm Material and design Material: Stainless steel 304 Design: cylindrical filter unit on a frame Location Location: 4th floor Fgjdpfx Ajz Iq Ntjl Ueh Condition Condition: used

Condition: used, Year of construction: 1998, machine/vehicle number: 09025018, 25 valves Filler Bertolaso for PET and glass (18 mm, hot filling ecologic with HEPA filter) (1998) Capacity: approx. 6000 bph different format parts Optional ID6103 - 24 grippers Rinser Procomac for PET and glas Fgjdpfx Alsz Ri Ihs Ush ID6011 - Screw capper Bertolaso 28 mm for PET (Plastic) (1998) with screw cap feeding

Condition: used, Year of construction: 2017, machine/vehicle number: 472447, LEIBINGER TRANSVASA 12/6 EK – monobloc counter-pressure bottle emptying / transfer machine for carbonated beverages in glass bottles IDENTIFICATION - Manufacturer: LEIBINGER - Model: TRANSVASA 12/6 EK - Year of manufacture: 2017 - Serial/order number: 472447 - Previous application: cider FUNCTION AND OUTPUT - 12 emptying valves - Counter-pressure emptying with long-tube technology - 6 decapping stations - Direction of operation: clockwise - Nominal output: 2,500 bottles/h for 0.75 l bottles - Adjustable range: 560–2,800 bottles/h - Designed for carbonated beverages, e.g. traditionally produced cider - Automatic removal and collection of pierced bottle closures - Integrated through conveyor PRODUCT AND UTILITY DATA - Maximum product temperature: 20 °C - Compressed air: 6 bar; connection R 1/2" - CO₂ product pressure: 8 bar; gas connection R 1/2" - Product outlet: DN 40 - Gas discharge: DN 40 - Buffer tank: 100 l nominal volume according to the order confirmation; 108 l according to the rating plate - Product pump: stainless-steel rotary lobe pump, material 316L - Conveyor height: 1,000 mm ± 50 mm Fgodpfxez Icc Sj Al Ush ELECTRICAL DATA - Operating voltage: 400 V - Control voltage: 24 V DC - Frequency: 50 Hz - Main drive: max. 0.75 kW MATERIALS AND DESIGN - Product-contact parts mainly made of stainless steel 316Ti and 316L - Main pipework made of stainless steel 316L - Emptying tubes made of stainless steel 304 - Food-grade plastics, e.g. POM and PTFE - Food-grade elastomers, e.g. EPDM - Hygienic tubular frame design without horizontal collection surfaces - Frameless Makrolon safety guarding with interlocked doors and removable covers - CIP connections - Mechanical lifting pistons press the bottles against the emptying valves - Bottle-presence monitoring at the infeed and jam monitoring at the discharge - Central safety clutch - Height-adjustable machine feet - CE-compliant design at the time of delivery ACCESSORIES AND DOCUMENTED BOTTLE FORMATS - SOWEC SO filter, year 2017 - Order confirmation: guide parts for one bottle format included - Lightweight 75 cl cider bottle: height 290 ± 1.8 mm, body diameter 82.8 ± 1.5 mm, 29 mm crown finish, approximate brimful capacity 78.5 cl, approximate glass weight 540 g - Méthode Traditionnelle 75 cl bottle, model 1164/320: height 300 ± 1.8 mm, body diameter 85.9 ± 1.5 mm, 29 mm crown finish, filling capacity 750 ± 10 cm³ at 72 mm, approximate glass weight 775 g, maximum carbonation 5.0 volumes CO₂ The original order confirmation, operating manual and bottle data sheets are available. The completeness and condition of the format parts and accessories currently present must be verified before use.

Condition: good (used), functionality: fully functional, Year of construction: 1998, operating hours: 2,619 h, load capacity: 2,000 kg, lifting height: 4,000 mm, free lift: 1,900 mm, load center: 500 mm, fuel type: electric, mast type: duplex, battery capacity: 500 Ah, remaining battery capacity: 86 %, battery voltage: 80 V, DGUV certified until: 10/2027, fork length: 1,200 mm, total height: 2,550 mm, Equipment: 3rd hydraulic function, 4th hydraulic function, CE marking, UVV, full service history, lighting, sideshift, Linde E 20 electric forklift with the following specifications: · Operating hours: 2,619 · Lifting capacity: 2,000 kg · Lifting height: 4,000 mm · Overall height: 2,550 mm · Year of manufacture: 1998 LINDE 2.0-ton electric forklift with a semi-cabin, very good tires (rear tires new), duplex mast with full free lift, battery with 86% capacity, side shifter, 4th valve, multi-lever, two-pedal control, lighting, fork length 1,200 mm, charger. Includes service according to LINDE manufacturer's specifications and a valid UVV inspection upon sale. Inspection, demonstration, and test drive are available upon request by telephone appointment. Fodpfxjzrr H De Al Usgh Sale is exclusively to commercial businesses; subject to prior sale, errors and omissions. We can deliver your new forklift cost-effectively with our own ramp-type low-bed trailer (transport costs on request). Further information and offers can be found on our website!

Condition: new, Year of construction: 2026, functionality: fully functional, VSM3.0DRO A-M Valve seat milling machine - new machine. Digital display valve seat milling machine. High precision valve seat milling machine specifically designed for multi-valve cylinder heads. Fsdpfx Aevmpnlsl Uogh Machining capacity from 16 mm to 90 mm. Variable speed from 100 to 1200 RPM. Max. cylinder head width: 500/19,7 mm/inch Max. cylinder head height: 450/17,7 mm/inch Tilt degree of cylinder head: +42°- -42° Max. tilt degree of spindle: 5° Travel: -Cross: 930/37 mm/inch -Longitudinal: 40/1,6 mm/inch -Spindle: 200/8 mm/inch Spindle power: 1.8 kw Max. rotation speed of spindle: 0-1000 RPM Power supply: 380V/50Hz 3ph vagy 220V/60Hz 3ph Air compressor supply: 6/87 Bar/psi Noisy level: at 400 RPM 72dBA; at 1200 RPM 82dBA Weight: 1050/2310 kg/lb Dimension (L x W x H): 1040 mm x 1050 mm x 2170 mm

Year of construction: 1993, condition: used, functionality: fully functional, APV Rosista DELTA D2 Valve Manifold – 199 Double-Seat Valves Manufacturer: APV Rosista Model: DELTA D2 Valve Manifold Year of Manufacture: approx. 1993 Condition: used Application: Dairy Industry / Food Processing Total number of valves: 266 pcs. Double-seat valves: 199 pcs. Fgsdpjz Ib T Aefx Al Uoh Nominal sizes: DN65 / DN100 Composition of the valve manifold: - 84 pcs. APV Rosista DELTA D2 Double-Seat Valves – DN100 - 115 pcs. APV Rosista DELTA D2 Double-Seat Valves – DN65 - 67 pcs. pneumatically actuated APV shut-off valves - 4 pcs. Endress+Hauser Promag P magnetic-inductive flow meters - 4 pcs. Fischer & Porter flow meters - 7 pcs. APV centrifugal pumps - extensive stainless steel piping - pneumatic actuation of the valves - valve controls / pneumatic connections - complete stainless steel substructure In total, the valve manifold has 266 pneumatically actuated APV valves, including 199 APV DELTA D2 double-seat valves.

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, operating hours: 11,000 h, 1. Applications & Design Designed as a horizontal bandsaw with a table layout, this machine is ideally suited for use in forges, rolling mills, die casting operations, steel finishing facilities, and tool & mold manufacturing environments. Its low table height enables installation directly on standard shop floors, simplifying material transport and handling. 2. Cutting Capacity Cutting range for round material (90°): up to 1,100 mm Cutting range for flat material (90°): up to 1,100 × 1,100 mm (Approximately 43.3 × 43.3 inches) 3. Performance & Drive System Drive power: 15 kW Saw blade speed: Infinitely adjustable between 8 – 84 m/min Total installed power: 30 kW Saw blade dimensions: 14,330 × 80 × 1.6 mm 4. Table Specifications Fjdpfx Alsw Tulge Uogh Table size (L × W): 3,000 × 1,500 mm Maximum table load: up to 30,000 kg Workpiece support height: 700 mm 5. Machine Footprint & Weight Overall length: 6,000 mm (approximate) Width: 8,100 mm (approximate) Height: 3,850 mm (approximate) Machine weight: around 16,000 kg 6. Notable Features & Options Independent traversable clamping system: Both the material clamping vice and the blade guide arms are independently movable, allowing large or oversized workpieces to be securely clamped without manual repositioning to a fixed side. Robust gantry frame: Two solid columns and support bars provide excellent stability, high load capacity, low vibration operation, and long service life. Optional 90° blade guide rotation: Allows both vertical and horizontal cutting, especially useful for notching sample workpieces. Powered duplex chip brushes: These automatically adapt to keep the saw blade clean during operation, enhancing blade life and reducing maintenance of the brushes. Integrated chip conveyor with coolant tank: Located beneath the cutting zone – collects chips and coolant, can be pulled out easily for cleaning. Open-access design for easy maintenance: All wear and maintenance parts are easily accessible, simplifying servicing, blade changes, and minor repairs. No foundation work required for installation.

Condition: used, Machine: Primus Vaculi 6 valve row filler Fodpfxez Icq Ao Al Ujgh

Year of construction: 2025, condition: new, Manufacturer: Consolidated / Baker Hughes Fjdpfsz Nh Idox Al Usgh Model: 1910-00K-1-CC-MS-31-RF-LA-HP-PED Year of manufacture: 2025 Quantity available: 3 units Condition: New surplus equipment, visually in excellent condition We offer three Consolidated 1910 Series industrial safety relief valves, manufactured in July 2025 by Dresser Italia S.r.l. The valves are designed for liquid service and feature original manufacturer identification plates with CE, ASME UV, and NB markings. Technical specifications: Series: Consolidated 1910 Outlet size: 3" / DN80 Service medium: Liquid Set pressure: 9.5 bar / 10.7 bar Nominal lift: 15.37 mm Flow area: 1,379.35 mm² Manufacturer: Dresser Italia S.r.l., Italy Manufacturing date: 07/2025 Available units: Serial number: N-25-006784 – Set pressure: 9.5 barg – Tag: SVP773 Serial number: N-25-006986 – Set pressure: 10.7 barg – Tag: SVP1122 Serial number: N-25-006785 – Set pressure: 9.5 barg – Tag: SVP775 Condition and documentation: The valves are in visually excellent condition. Previous installation or operating history has not been confirmed. Individual test certificates are not currently available. Available from our warehouse in Rotterdam, the Netherlands. Worldwide shipping can be arranged upon request. Please contact us for additional pictures, technical information, or a quotation.

Condition: used, machine/vehicle number: PMAM010000, Bertolaso Athena 40/8 Fruit Juice Filler with Adjustable Stars Fgjdpfx Asz Icgwjl Uoh consisting of: - Jucie Filler 40/8 - 8 Head Screw Capper for: 28 TS RO PP (MCA28),  VC 30x60 (BVS 30/60 , Pick & Place Plastic Caps 38mm

Condition: used, Used Matra valve grinding machine with double-cone collets as shown, 380 Volt electric motor fully functional. Fgjdpoz Ig U Eefx Al Ueh Please do not send email enquiries! If you have any questions, we are happy to assist you by phone. Viewing and collection only possible by prior telephone appointment! Subject to alterations, prior sale, and errors.

Condition: used, Füller 4 Ventile motor für Vakuum Edelstahlausführung Fsdpfsz N D Hvex Al Ujgh

Condition: new, Year of construction: 2013, Internal valve, Petrol Valves, Body - A995-4A/UNS, J92205 NACE, Class ASME 2500, 8inch, Serial 39275. API 6D, ISO 14313, 3pcs. Fjdpevvh H Ejfx Al Uegh

Condition: excellent (used), For sale: a functional Rexroth hydraulic pump with a mounted Rexroth control valve. The condition of the housing, shaft, connections, and other components is shown in the pictures. Readings from the nameplates: Component Designation / Number Pump Type SY2DFEE-20/100-100/01073331+01073331 Pump Material Number (MNR) R901073415 Fedpfjz Ezv Eex Al Usgh Pump Serial Number 31132779 Additional Number on Pump Nameplate 000121315715 Pump Designation FD 07W02, SN 000001 Valve Type VT-DFPE-A-22/G24K0/2D0V/V-019 Valve Material Number (MNR) R901031176 Additional Number on Valve Nameplate 000121122273 Valve Designation SN 000002 The pump is used and shows signs of wear, as visible in the pictures. Before purchasing, it is recommended to compare the complete designations from the nameplates, the shaft, and the connections with the requirements of your machine.

Condition: new, Moog Servo Valve Unit D665-5703 & D661-5623C – High-Performance Valve Module Fgsdpfexltkkjx Al Ush For sale is a fully functional, industrial-grade, high-performance servo valve unit from MOOG, consisting of two perfectly matched valves. Also available as individual components! Moog D661-5623C – High-Response Valve | Technical Characteristic | Value | Model Designation | D661-5623C | Type Code | G18H0A0NSA0HP | Valve Type | 4-way, 2-stage with spool | Nominal Flow Rate | 120–200 l/min (depending on the version) | Operating Pressure P, A, B | max. 350 bar | Return Pressure T (internal) | 210 bar | Return Pressure T (external) | 280 bar | Control Pressure | 25–350 bar | Spool Stroke | ±0.13 mm | Control Area (AK) | 1.35 cm² | Response Time (0–100%) | approx. 14 ms | Hysteresis | < 0.6 % | Null Shift | < 1 % | Supply Voltage | ±15 V DC | Input Signal | ±10 V | Protection Class | IP65 | Weight | approx. 5.7 kg | Connection Diagram | ISO 4401 Moog D665-5703 – High-Performance Valve | Technical Characteristic | Value | Model Designation | D665-5703 | Type Code | K15HXJW4NSM0-P | Valve Type | 4-way, 3-stage, ServoJet | Nominal Flow Rate | 1500 l/min @ Δp = 5 bar per control edge | Operating Pressure P, A, B | max. 350 bar | Return Pressure T (internal) | max. 100 bar | Return Pressure T (external) | max. 280 bar | Control Pressure min/max | min. 25 bar above T / max. 350 bar | Control Piston Stroke | ±8 mm | Control Area (AK) | 9.6 cm² | Hysteresis | < 0.2 % | Null Shift (55K ΔT) | < 2 % | Null Leakage (total) | max. 11 l/min | Supply Voltage | ±15 V DC | Input Signal | ±10 V | Protection Class | IP65 | Weight | approx. 73.5 kg | Connection Diagram | ISO 4401-10 | Connections | X and Y external (ServoJet required) Description & Application: Condition: new (see pictures). Note: For detailed technical data and processing instructions, we strongly recommend consulting the original data sheets or contacting the manufacturer directly. You can find more new and used items in our shop! International shipping costs upon request!

Condition: good (used), functionality: fully functional, Year of construction: 2010, operating hours: 8,805 h, load capacity: 4,000 kg, lifting height: 4,450 mm, free lift: 150 mm, load center: 500 mm, fuel type: electric, mast type: other, construction height: 3,150 mm, battery capacity: 870 Ah, remaining battery capacity: 78 %, battery voltage: 80 V, DGUV certified until: 10/2027, fork length: 2,400 mm, total height: 3,150 mm, Equipment: 3rd hydraulic function, 4th hydraulic function, CE marking, UVV, cabin, full service history, lighting, sideshift, Still RX 60-40 electric forklift with the following specifications: Fgodpfszivgcjx Al Ueh Lifting capacity: 4,000 kg Lifting height: 4,450 mm Overall height: 3,150 mm Year of manufacture: 2010 Operating hours: 8,805 STILL 4.0-ton electric forklift with a full cabin and heating, 78% battery life, good tires (new rear tires), telescopic mast for unobstructed visibility, side shifter, 4th hydraulic valve, pre-equipment according to StVZO (German Road Traffic Licensing Regulations), fork length 2,400 mm, charger Additional attachments such as fork positioners, rotators, etc., as well as other fork lengths, are available upon request. Price ex works, including 1,000 hours of service according to STILL manufacturer specifications and a valid FEM (UVV) inspection upon sale. Inspection, demonstration, and test drive are available by telephone appointment. Sale is exclusively to commercial businesses; subject to prior sale, errors and omissions excepted. We can deliver your new forklift cost-effectively with our own ramp-equipped low-loader (transport costs upon request). You can find more information about us and our other offers on our newly designed website!

Condition: used, Hydraulic valve, servo valve, proportional valve Hydraulic servo valve, continuously variable valve, PARKER DFplus type D3FPE02YC9NB00 20 Manufacturer: Parker Hannifin GmbH Operating voltage: 24 VDC Operating pressure: max. 350 bar Length = 245 mm Fedpfxoz Eu E Hs Al Usgh Width = 70 mm Height = 155 mm Weight: 6.2 kg Good condition

Condition: excellent (used), Colotronik two-component mixing unit for plastic granules. The mixing unit can be used in conjunction with commercially available conveyor systems. It receives a start signal from the conveyor system and then mixes the two granule components independently. Fgedpfx Alsz H Sbns Ueh The unit was hardly used, or possibly not used at all. If it was used, only polypropylene (PP) was processed. Glass fiber reinforced materials were not used.

Condition: new, Year of construction: 2014, machine/vehicle number: 44704, Petrol Valves A182-F51, type BALL, 12", class ASME 600, body A182-F51 NACE. New. Fgodpfxevvh Szo Al Uoh

Condition: excellent (used), functionality: fully functional, Year of construction: 2014, operating hours: 3,845 h, load capacity: 3,500 kg, lifting height: 3,600 mm, load center: 500 mm, fuel type: electric, mast type: other, battery capacity: 775 Ah, remaining battery capacity: 76 %, battery voltage: 80 V, DGUV certified until: 10/2027, fork length: 1,200 mm, Equipment: 3rd hydraulic function, 4th hydraulic function, CE marking, UVV, cabin, full service history, lighting, sideshift, Still RX 60-35 electric forklift with the following specifications: Fjdpfxozvxvmo Al Usgh * Lifting capacity: 3,500 kg * Lifting height: 3,600 mm * Overall height: 2,550 mm * Year of manufacture: 2014 * Operating hours: 3,844 STILL 3.5-ton electric forklift, good battery, good tires (rear tires new), telescopic mast with clear view, side shifter, 4th valve, single-pedal control, mini joystick, lighting compliant with StVZO (German Road Traffic Licensing Regulations), fork length 1,200 mm, charger Price ex works, including 1,000 hours of service according to STILL manufacturer's specifications and a valid FEM (UVV) inspection upon sale. Inspection, demonstration, and test drive are available by prior telephone appointment. Sales are exclusively to commercial businesses; subject to prior sale, errors and omissions excepted. We can deliver your new forklift cost-effectively with our own ramp-equipped low-loader (transport costs on request). You can find more information and offers on our newly designed website!