1
Container content: 400 l
Flow rate: max. 60 l / min
Filter fineness: greater than 0.003 mm
Connected load: approx. 2.0 kW (400 V / 50 Hz)
Dimensions W x D x H: 1000 x 1000 x 1370 mm
Bvagwip0zc
Weight: approx. 200 kg
colour: Gray
Description: Suitable for cleaning cooling oil used for grinding of carbide metals.
4
Cleaning fluid, cooling fluid for spindle oil cooler, spindle cooling for machining center
-Number: 9x containers with 200 liter cleaning fluid
-Price: complete
-packed on: EURO pallet
Bbf2gipd9i
-Weight: 252 kg
6
cooling capacity: kW
drive power: kW
voltage: 400 V
operating pressure: bar
volume: 179 l
Number of motors: 3 Stück
motor capacity: 0,18 kW
Number of ventilators: 8 St.
total power requirement: kw
weight of the machine ca.: 1,1 t
Gxb7nc
dimensions L x W x H: 5,9 x 2,3 x 1,5 m
Table cooler/refrigerator/heat exchanger on supports
-operating temperature 82°C
-volume 112 litres
-with water connection: 1x inlet pipe Ø 50mm; 2x outlet pipe Ø 40mm
5
liter capacity 400 l
----- /
CAPACITY, RATING /
Bjyhnlgaiz
- volumetric flow rate 400 l/min
- feed pressure 3.5 bar
- tank volume 4300 ltr
DIMENSIONS / WEIGHTS
- space requirements -left/right- 4800 mm
- space requirements -front/back- 1800 mm
- total height 1950 mm
DIMENSIONS / WEIGHTS
- total weight approx. 1500 kg
coolant tank 16 l
connected load frequency 230 V
D8bk0z7vu
Motor capacity kW
weight of the machine ca. 11 Kg
dimensions 400 x 300 x 400 mm
Complete coolant system
4
Coolant pump, submersible pump, suitable for
emulsion or thin-bodied oils.
Delivery rate: up to 4000 litres/hour
= 66 litres/minute
Delivery pressure: 12,9 bar !
Power : 3 kw
Immersion depth: 530mm
Balqvkyc
Power connection: 400 Volt
A test run was carried out with low viscosity oil !
No guarantee / warranty
Only pickup from location- no shipping
2
for surface grinding machine or similar
Dimensions 770 x 500 x 500 mm
with pump
Qslcsemr
mobile
7
Shelf pan, collecting pan, floor pan, pallet pan, collecting container, collecting pallet, floor element, flat steel pan, collecting pan for coolant liquid
-Collecting tray: for chips with coolant liquid, 1200 x 800 mm
-Trough height: 400 mm, can be shortened
-Rectangular cutout: 420 x 215 mm
-Dimensions: 1200/800 / H400 mm
Bzlmfwuc3p
-Weight: 10 kg
8
2.piece high pressure coolant system
MAHLE year 2013
Lbp3pf0e
Pressure max.50 Bar
Tank capacity ca.500l
Dimensions:L1.2mW0.8mH2,5m
Weight approx. 1.5t For mounting on machine tools.
Price per 1.piece.
3
Coolant pump
Make Optimum
Canister : 370 x 250 x H.170 mm
Type 3352001
Bhhywxqtvq
Motor 32 W/400 V -50 Hz
min.2800
Amp.0,08
Series BJ 201006
6
cooling capacity: kW
drive power: kW
voltage: V
operating pressure: bar
volume: l
motor capacity: kW
Vssrgi
Number of ventilators: St.
voltage: 360-730 / 50 V / Hz
total power requirement: kw
weight of the machine ca.: 0,150 t
dimensions L x W x H: m
3
coolant capacity 30 l/min
Capacity 70 Watt
conveying height 4,5 m
voltage 400 V
Suction depth 85 mm
Submersible pump in various depths
Of 85, 120, 150, 180, 200, 250, 300 mm
Option:
To7oi83f
You can also get the PA 35 with 230 V (PA 35 M) operating voltage,
The loss of performance is then about 10%.
5
The system was used for a Deckel machining centre DMC 70V.
Bikp2s7rj7
3
liter capacity l
2rgosq
3
Water cooling serial. KKT KRAUS type KWC S 38
Masch.# IK 16-44-01-99 built in 1999
Gxqfood
Technical data:
Refrigerant 407 C.
Liquid drinking water
Commercial performance 45.2 kW
Temperature nominal/min/max 15/13/35 ° C
Kuehlfluessigkeitstemeratur nominal/min/max 23/5/25 ° C
Hysteresis + 2 K
Tank 350 l
Coolant flow 6500 m³/H
Sound pressure level 65 dB(A) at 5 m
Weight empty / mode 420/770 kg
Primary pumps (evaporator) MHI 404
Power connection 11 kW
External dimensions approx. 1600 x 1400 x 1800...
3
Bandskimmer
Bcqdshcybc
Brand Polo filter Bremen
Immersion depth maximum 600 mm
Band width 100 mm
220 volt
Operating voltage 24 volt
Weight 11,5 kg
Shipping dimensions: L. 420 x B. 260 x H. 550 mm
5
Chiller cooling machine from Termotek
As good as new condition
Cooling capacity 15000 W at 20 degrees water and 35 degrees environment
Pump 35 l/min at 2 bar
400 Volt
Year of manufacture 2013
Location Aachen
Bpiri2natx
3
coolant capacity 14 l/min
Capacity 60 Watt
conveying height 4,2
voltage 230 / 400 V
0 3/8" mm
Suction depth 150 mm
Submersible pump in various depths
Of 85, 120, 150, 180, 200, 250, 300 mm
Option:
Bxg27nlnap
You can also get the PA 35 with 230 V (PA 35 M) operating voltage,
The loss of performance is then about 10%.
7
coolant tank 10 l
connected load frequency 230 V
Motor capacity 0,09 kW
weight of the machine ca. 7 Kg
dimensions 390 x 270 x 310 mm
Bhz7vecso2
Complete coolant system
5
bestehend aus :
Jxdwru
Kompaktfilter KF 900 ,Filterleistung 900 L/min ,mitb Filtervlies PW 70/70,
und Kühlmittelanlage FKA/5800 , Inhalt 5800 Liter,Kreiselpumpe - Volumenstrom 200L/min mit 4 bar, Spülpumpe - Volumenstrom 100 Liter/min mit 1 bar , Niederdruckpumpe
Hochdruckpumpe Volumenstrom 400 L/min bei 50 ba
8
Collection is not organized
Hjudeoj7
6
Triomed emulsions care unit
Vsb00
Emulsion splitting plant, oil-water separation system, high performance separator
10
Knoll coolant filter system KF1000-E / 5000
Suitable for the following materials:
- Steel
- casting
- aluminum
Tank volume:
approx. 4,000 l
Mains voltage:
400V
Motor voltage:
380V to 440V
Mains frequency:
50Hz
Bw0rtnewzm
5
coolant capacity 65 l/min
Eh3ebw3h3
Capacity 0,12 Watt
conveying height 5 m
liter capacity 65 l/min
total power requirement 0,16 kW
voltage 400 (230) V
depth 85, 120, 150, 170,190 usw mm
0 1/2" mm
voltage 230 V
Suction depth ab 85 bis 400 mm
11
Do not hesitate to ask, if there are any questions.
Bykxbhvkfs
8
High performance belt filter system for oil
very good condition because almost not used
Byctsaoa07
incl. 2kW cooling unit Hyfra Chilly25 (not integrated)
incl. level control
incl. lifting pump (116l/12bar)
8
Knoll filter system consisting of
Bw9l0vue83
Coolant basin FKA 2300
with 2300l volume for coolant
Filter system KF400
without pumps
Year of construction: 2017
Control: Siemens Simatic HMI
3
Cooling lubricant pump TA1302-1070 from company Brinkmann
(Submersible pump /Centrifugal pumps)
Technical data:
Type TA1302-1070
Manufacturer Brinkmann Pumpen
Year of manufacture
Power 7,5 kW
rated current 13,6 A
voltage 575 V
Jxa90u
Speed 345000 rpm.
Protection class IP55
Frequency 60 Hz
Weight 99 Kg
Pump body cast iron
Cover cast iron
Impellers Cast steel
Shaft Steel
h = 1070
The pump is fully functional and was last overhauled by Becsi. Since then it is stored with us.
An inspection under po...
3
Flow rate: 5 800 L/h
Bnfydxnpe
Pressure: 25 bar
Max. Temperature: 90 °C
Power: 4 Kw
Immersion depth: 450 mm
Height above tank 1 000 mm
Pump has been installed with KNOLL compact filter unit year 20213,
after commissioning it was replaced as new.
3
coolant capacity 65 l/min
Capacity 0,12 Watt
conveying height 5 m
liter capacity 60 l/min
Brxcjcevd9
total power requirement 0,16 kW
voltage 230 V
0 1/2" mm
Suction depth 150 mm
1
filtration plant for whole kieselguhr oil, complete with 600 lt. tank. filtration capacity 80lt/min.
Bxz0huai88
1
Coolant delivery device consisting of metal tank (capacity 16 litres), coolant pump, hoses and fitting.
Jvcsvi
3
Cooling 20 - 55 °
Cooling medium R 134
Total cooling DIN EN 14511
Djmi9gb
3
Cooling lubricant pump TG50-10/40 840 from Knoll
The offered cooling lubricant pump is a pure medium pump which can convey media with light contamination. This pump is able to supply machines with cleaned cooling lubricant (incl. residual dirt).
Advantages:
Very high efficiency due to aerodynamically favorably shaped impeller.
High load capacity due to solid shaft-hub connection.
Very long service life with robust cast iron casing.
Dry-running safety due to overhung shaft.
Long service life tha...
4
138 bar - 8 output lines - flow rate 16 l/min -
Blvqz8dp0e
motor 3.75 kW - weight 377 kg - 3 phase 400 V -
type of coolant oil only
it was fitted to Star SR-20RIII
3
coolant capacity 16 l/min
Capacity - Watt
conveying height 2,5
total power requirement 60 Watt
Benmdwfhts
voltage 24 V
depth kompl. mm
0 11,5 mm
A submersible pump that has been developed to be completely in the cooling fluid
To be submerged.
It is mainly used in small machines with
Low coolant use (for example, sawing and drilling machines).
8
Knoll high pressure coolant system
with filter
Suction in bypass procedure for cooling channel drill etc.
can be operated independently
was intended for an indexing plate automatic lathe
so far only in "trial operation"
M8nvc2
High pressure pump
KTS 25-38 T
Turbo Filter
70-215
separate suction pump
approx. 250l coolant tank
Pneumatic chip separation
Was operated with thin oil
4
Coolant tank including pump 27-06-302
Delivery time: immediately
Number: 27-06-302
Machine data
L x W x H: approx. 800 x 500 x 250 mm
Weight: approx. 15 kg
*NEW*
** Housing powder-coated outside RAL 7035 **
O03tt
Equipment:
- submersible pump
-removable lid
Price and further technical data on reques
6
Paper filter unit: RESY KBF 452/500
Filtration takes place in a semicircular filtration tank with a hydrostatic pressure of approx. 200 mm. Two filter wheels cause the lateral sealing of the filtration tank. Between the pair of wheels several sludge drivers are attached, which eject all dirt. The filter inlet is centric. The filtrate outlet is over the entire footprint vertically downwards.
with:
1 pcs. Pump GRUNDFOS
1 pcs. High pressure pump BRINKMAN PUMPS 30 bar
M9juz
1 pcs. submersible pump...
3
Cooling lubricant pump TG50-42/55 840 by Knoll
The offered cooling lubricant pump is a pure medium pump which can convey media with light contamination. This pump is able to supply machines with cleaned cooling lubricant (incl. residual dirt).
Advantages:
Very high efficiency due to aerodynamically favorably shaped impeller.
High load capacity due to solid shaft-hub connection.
Very long service life with robust cast iron casing.
Dry-running safety due to overhung shaft.
Long service life thank...
OILEX Mini 25 coalescence- oil separater to care watermixed coolant.
Foreign oil is a main reason for bacterium growth!
Range of application: Coolant- volume up to max. 300 litres and low level fluctuations. Only partially for use with plastic chips!
Bymu3vgh
Technical datas:
- Dimensions L x W X H ca. 200 x 200 x 400 mm
- Electrical swimmer pump 230V/50Hz/AC with hose package and magnets for assembly
- Variable flow capicity from 150- 250 l/h
- Washable labyrinth filter (coalescence step...
3
coolant capacity 16 l/min
Capacity - Watt
conveying height 2,5
total power requirement 60 Watt
voltage 230 V
depth kompl. mm
0 11,5 mm
Nll9t
A submersible pump that has been developed to be completely in the cooling fluid
To be submerged.
It is mainly used in small machines with
Low coolant use (for example, sawing and drilling machines).
7
Here we offer you an order cooler.Hydac Cooling System Liquid cooling system as add-on device400 V - 10% 8%/440V - 10% 14PH 50 HzCooling capacity: 25 kWRefrigerant: IWPump capacity: 75 l/min at 3 barDimensions: approx. 1230 x 601 x 2125 mmmax. 34,0ATyp: RFCS-G6-0025000-W-W-R24-4-IWCondition: used / usedScope of supply: (See picture)(Changes and errors in the technical data, specifications are reserved!)We are happy to answer further questions for you on the phone.
Bft7lujbzv
4
Coolant tank including pump 27-06-301
Delivery time: immediately
Number: 27-06-301
Machine data
L x W x H: approx. 600 x 400 x 350 mm
Weight: approx. 15 kg
Mezg78y
*NEW*
** Housing powder-coated outside RAL 7035 **
Equipment:
- submersible pump
-removable lid
Price and further technical data on request
5
Parker filter F17ZP filter element 3075ZP
New with accessories, 2 STK. in stock, available for immediate delivery
Bbb0eiixgg
2
MTR 10-20/6 A-W-A-HQQE from the company Grundfos
This submersible pump is suitable for machining, washing and cleaning. It is a vertical, multi-stage cooling lubricant pump made of stainless steel for tank mounting.
It is a new product!
Technical data
speed 2899 1/min
Bxz8vzber2
Nominal volume flow 10 m³/h
Nominal head 47.4 m
Number of stages 20
Number of impellers 6
Mechanical seal HQQE
Pump head material Stainless steel 1.4408
Impeller material Stainless steel 1.4301
Max. Operating pressure 25...
4
Danfoss Compressor for Okuma spindle cooling
Bujsp9iw2c
3
Bottrop-Grafenwald, Germany
(dealership location)