Used High Pressure Coolant Systems for sale (51,836)

Condition: used, 2 no. LNS Chipblaster SA-34K year 2019 and 2022, high pressure coolant system Ihodpfxjwz Iipe Abreu

Year of construction: 2011, condition: like new (used), Offer on request 2 pieces available Motor power: 3 KW Voltage: 400 V Maximum capacity: 40 LM Pressure: 20 Bar Tank capacity: 980 Lt. Weight: 900 kg with cooling system EUROCHILLER GC-B A 009 SP - year 2011 400 V 50 HZ Ijdpfodtyx Eex Abrshu 6 Kw 9 A 24 Vaux 500 VI 54 IP R407c gas Air condenser: 25°C Water process: 15°C Weight: 4 kg

Condition: good (used), water pressure: 1,500 bar, Aquablast DUO surface cleaner. Clean, demolish, and strip surfaces with high-pressure water. Clean, strip, remove, demolish, and roughen Isdsv S Ep Aspfx Abrjhu The Aquablast offers numerous applications for every surface. Different results are achieved depending on the pressure and flow rate. Applications range from thorough surface cleaning to targeted removal of solids.

Condition: refurbished (used), Year of construction: 2003, operating hours: 7,951 h, functionality: fully functional, total width: 2,450 mm, total length: 7,600 mm, pressure: 1,000 bar, operating pressure: 1,000 bar, fuel: diesel, overall weight: 9,000 kg, rotational speed (max.): 2,100 rpm, empty load weight: 9,000 kg, year of last overhaul: 2025, water pressure: 1,000 bar, pump capacity: 205 l/min, Equipment: rotational speed infinitely variable, type plate available, Hochdruck pump unit Hammelmann HDP 402 in WAB container. Similar but not Kamat, Uraca, or Woma. Pump type: Hammelmann HDP 402 PRESSURE STAGE 1: Operating pressure: 880 bar Flow rate: 242 l/min. PRESSURE STAGE 2: Operating pressure: 1000 bar Flow rate: 205 l/min. Drive speed: 2100 rpm Plunger: dia. 50 mm Drive power: 400 kW With 442 kW Caterpillar C-15 2CPXL14.6ESK diesel engine With workshop and changing room included. Dimensions (LxW): approx. 7600x2450 mm Weight: approx. 9000 kg Iedpfsipadxjx Abrohu Year of construction: 2003 Operating hours: 7951 Condition: High-pressure pump has received new valves. New batteries. In good used condition.

Condition: excellent (used), Year of construction: 2007, operating hours: 3,114 h, functionality: fully functional, total width: 2,500 mm, total length: 7,100 mm, total height: 2,800 mm, pressure: 1,120 bar, operating pressure: 1,120 bar, fuel: diesel, overall weight: 12,000 kg, rotational speed (max.): 2,100 rpm, water tank capacity: 1,600 l, empty load weight: 12,000 kg, power: 286 kW (388.85 HP), year of last overhaul: 2024, water pressure: 1,120 bar, pump capacity: 111 l/min, Equipment: rotational speed infinitely variable, type plate available, High-pressure pump unit Hammelmann HDP 233 in BDF / WAB container. Similar but not Kamat, Uraca, or Woma. Pump type: Hammelmann HDP 233 PRESSURE STAGE 1: Operating pressure: 1120 bar Flow rate: 111 l/min. Ijdpfx Aswyw Dtjbrshu PRESSURE STAGE 2: Operating pressure: 920 bar Flow rate: 131 l/min. Selector/diverter valve with manual switch installed. Drive speed: 2100 rpm Plunger: d30 mm Drive power: 230 kW With 286 kW Deutz BF 6M 1015 C diesel engine With workshop and changing room. Dimensions (LxWxH): approx. 6000x2500x2800 mm Weight: approx. 12,000 kg Year of manufacture: 2007 (HD pump from 2005) Operating hours: 3114 Condition: New plunger seals, fuel and oil filters. The high-pressure pump is in very good used condition.

Condition: like new (used), Year of construction: 2024, operating hours: 140 h, functionality: fully functional, total width: 1,900 mm, total length: 3,800 mm, total height: 2,000 mm, operating pressure: 2,500 bar, fuel: diesel, overall weight: 3,000 kg, rotational speed (min.): 1,950 rpm, empty load weight: 2,500 kg, fuel tank capacity: 140 l, noise level: 109 dB, power: 148 kW (201.22 HP), Equipment: type plate available, Den-Jet CDT200-2500 Pressure: 2500 bar Flow rate: 25L Engine power: 200 hp A lease purchase is also possible. The full manufacturer's warranty is still available. Contact: +436677994594 Ihodsxawf Iopfx Abrsu

Condition: excellent (used), Year of construction: 2012, Reading Bakery Systems Low Pressure Extruder 2012, Stainless, accurate production of a wide range of products including pretzels, shapes, sticks, braids, sushki, and other co extruded products, touch screen controls, twin hopper, efficient and precise dough forming, consistent and accurate piece weights, quick and easy product changeover, jacketed extrusion housing for temperature control, lightweight plastic hoppers for easy sanitisation, bandcutter operates 275 cuts per min or in a cycle mode up to 50 cpm, capable of 1500Kgs per hour, mobile, with pallet of spares, 3Ph Ihodpfx Asx Edfxsbrou

Condition: good (used), Technical Data for the Pallet Racking System: Racking System: Feralco Type: NS Technical Data for Installation: Number of racking runs: 01 pcs. Length per racking run: 22,455 mm Number of bays per run: 08 pcs. Number of levels plus floor level: 02 pcs. Scope of delivery includes: 09x pallet rack frames, used Material finish: Sendzimir galvanized Type: 20 M Profile dimensions: 95 x 60 x 2 mm Incl. horizontal and diagonal braces, base plates Frames are pre-assembled (bolted truss) 2,550 mm high 1,250 mm deep 32x pallet rack beams, used Material finish: RAL 2004 orange Box profile: 80 x 50 mm Beam type: 80 E15 Connector: 3 HK (hooks) Clear span: 2,700 mm Max. load per beam pair: 1,500 kg, with evenly distributed load 64x safety pins, used Material finish: Sendzimir galvanized For securing the longitudinal beams against accidental lifting 36x wedge anchors, new Manufacturer: Hilti Model: HST2 V3 M12x105 5-25 Execution: Carbon steel, galvanized Approved for: cracked concrete 18x shim plates, used Finish: completely galvanized For leveling the rack frames installed on uneven floors 01x load sign Indicating bay and compartment loads, manufacturer, and job number Dimensions: 420 x 297 x 3 mm Iedeyknl Iopfx Abrehu Your contact persons in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is only offered for collection. Any transport or shipping beyond this must be arranged separately and will incur additional costs, which can be requested from us depending on the delivery location and order volume.

Condition: like new (used), Year of construction: 2024, operating hours: 260 h, functionality: fully functional, cutting width (max.): 530 mm, cutting length (max.): 750 mm, total width: 2,000 mm, input current: 32 A, total height: 2,400 mm, working width: 510 mm, total length: 6,100 mm, input voltage: 400 V, space requirement height: 3,000 mm, space requirement length: 7,500 mm, space requirement width: 2,500 mm, Equipment: documentation/manual, MOTIONCUTTER® 530 – Fully Loaded 450W Digital Laser Finishing System Installed December 2024 | Only 260 Operating Hours | As-New Condition Available immediately in the UK. This is a fully equipped MOTIONCUTTER® 530 high-speed digital laser system with Automation Suite, Position Sensor, Waste Separation and Shingling Belt — essentially the complete production configuration originally supplied fully installed and trained at approx. €317,000 Installed December 2024. Only 260 total operating hours since new. This machine is barely run-in. What You’re Getting Core Machine 450W CO₂ sealed-off laser (600W guaranteed output) 510 x 510 mm working area Up to 18,000 mm/s deflection speed ±0.2 mm dynamic tolerance 20,000 hour expected laser lifetime Mistral 530 pile feeder 80–500 gsm Sheet size up to 530 x 750 mm (extendable to 1000 mm) Conveyor System Patented metal mesh belt 0–45 m/min speed Integrated cleaning station Fully Loaded Options Included ✅ Automation Suite Barcode job recognition Automated job handling Workflow XML integration 100% production control on every sheet ✅ Position Sensor Iedpfx Abeyk Ip Tsrehu On-the-fly X/Y correction to printed mark Critical for precision packaging alignment ✅ Manual Waste Separation Mechanical stripping of finished product from waste ✅ Shingling Belt High-capacity delivery system Software-controlled separation of jobs This is the configuration serious packaging converters buy. Capabilities Cut | Filigree Cut | Kiss Cut Crease | Micro Perforate | Engrave Variable Data Finishing NAMECUT® Personalisation from CSV All in one pass. No tooling. No dies. Ideal For Folding carton short runs Cartonboard packaging Personalised packaging Luxury packaging prototypes High-value sheet finishing Indigo / sheet-fed digital press finishing If you’re currently outsourcing die-cutting for short runs, this replaces that dependency overnight. Condition Installed December 2024 Only 260 hours total runtime Clean production environment Fully operational Available for inspection & test runs in the UK Reason for sale: strategic production shift. Why This Is Attractive Skip 8–10 week factory lead time Skip installation delays Skip international shipping Get a fully proven, calibrated machine Save significant capital vs buying new Serious enquiries only. Available immediately.

Condition: ready for operation (used), Year of construction: 1993, Flow rate: 180 - 1000 l/h Iedpeyh Hpqefx Abrohu Working pressure at delivery volume 16 l/min max.: 180 bar Drive motor: 380 V, 7.5 kW Space requirement: 900 x 420 x 870 mm

Condition: used, NC High-Pressure Vice, High-Pressure Machine Vice RÖHM NC Precision Machine Vice Iodpfxoxxmf Uo Abrjhu Type: RKD-125 ID No.: 180467 / D2950 Year of manufacture: approx. 2010 Jaw width, step jaws: 125 mm Jaw height, step jaws: 40 mm Jaw width, attachment jaws: 135 mm Jaw height, attachment jaws: 49 mm Machine vice base width: 126 mm Opening width, max.: 141 mm per side (only with step jaws, without attachment jaws) Clamping force: 4 tons Guideway height: 105 mm - High-pressure vice with mechanical force amplifier - Clamping force adjustable in 4 stages from 1 to 4 tons - 2 clamping functions: single clamping with dummy and double clamping - Various clamping ranges via 3 guide grooves in each base jaw - Step jaws (reversible) - Stable base body, ground on all sides - Can be mounted horizontally, vertically and laterally - Center jaw dimensions (L x W x H): 125 x 40 x 40 mm - Attachment jaw dimensions (L x W x H): 135 x 20 x 49 mm Dimensions (L x W x H): 680 x 135 x 155 mm Weight: 56 kg Good condition

Condition: used, Hydraulic machine vice, high-pressure clamp KESEL ARNO Jaw width: 200 mm Ihedpfjd Amwiex Abrsu Jaw height: 60 mm Clamping force: 8 tons Clamping range: 0 to 370 mm Opening width: max. 373 mm Guideway height: 140 mm - 2 clamping ranges adjustable via locking pin - Swivel base plate Dimensions (L x W x H): 900 x 400 x 210 mm Net weight: 125 kg Good condition

Condition: used, Hydraulic machine vice, high-pressure clamp ARNOLD / FRESMAK Jaw width: 160 mm Jaw height: 50 mm Clamping force: 5 tons Clamping range: 0 to 305 mm Maximum opening: 308 mm Guideway height: 112 mm - 2 clamping ranges adjustable via locking pin, 0 to 158 and 148 to 308 mm - with rotary plate Dimensions (L x W x H): 580 x 325 x 165 mm Own weight: 65 kg Ijdpfexp R E Tjx Abrshu Good condition

Condition: like new (used), Year of construction: 2019, Air-operated double-acting high-pressure pump The Resato P200-100-2 is an air-operated, double-acting high-pressure pump used for pressurizing liquids in various industrial applications such as hydrostatic testing and chemical injection. The Resato P200-100-2 pump operates on the principle of an automatically reciprocating differential piston to convert compressed air into a high-pressure liquid flow. Manufacturer: Resato Type: P200-100-2/U/V Type: Air-operated, double-acting high-pressure pump Air piston diameter: 200 mm Torque ratio: 100 Flow rate: 6.6 l/min Weight: 21 kg Year of manufacture: 2019 Max. outlet pressure Regulated by the air supply pressure. At 7 bar (100 psi) air pressure, the static ultimate pressure is up to 700 bar (~10,000 psi) (based on the Resato type table for P200-100-1/P200-100-2). Compatible media Suitable for water, oil, or an emulsion of both. Can also be used for a wide range of chemical fluids. Materials (wetting parts) All wetted parts are made of specially selected stainless steel. Operating Medium (Drive) Can be operated with compressed air or nitrogen at a maximum pressure of 7 bar (100 psi). Features Reduced noise, minimized downtime due to easy maintenance of seals and check valves, and prevention of pump freezing. Applications The P-Series, to which the P200-100-2 belongs, is used in various industries, including oil and gas, automotive, and research. Typical applications include: Hydrostatic testing of hoses, valves, pipes, and pressure vessels. Pressurization of hydraulic components. (Chemical) injection. Disassembly of bearings and bolt tensioning. Research and development. Isdjyk Uc Hspfx Abrshu Find more items—new and used—in our shop! International shipping costs on request!

Condition: excellent (used), filter area: 50 m², suction capacity: 650 m³/h, negative pressure: 38,000 Pa, High-pressure fume extractor, dust extractor, TEKA self-cleaning filter. Ijdporhidmsfx Abrohu Filter for plasma, laser. Due to its design, the system is particularly recommended for processing greasy, sticky fumes and dust. The device is equipped with an automatic system for impregnating cartridge filters and an activated carbon filter for neutralizing odors generated during processing. The filter is cleaned pneumatically with impulses of compressed air during operation, which results in high efficiency of the device. The extraction is designed for special applications where the filtered fumes and dusts may be soggy and sticky. By feeding the impregnant, moisture is captured from the smoke, which helps protect the filters from sticking. In this case, the life of the patron filters is extended. After the cleaning process, the control gives a pulse to the magnetic valve, located on the top cover of the powder-filled barrel. The applied magnetic pulse swirls the impregnant, which enters the suction pipeline. The powder covers the working surface and provides a protective coating for the filters. Unit like new - worked only 126 hours !!! Turbine with a power of 7.5 Kw. in a sound-absorbing housing with a silencer Capacity 650 m3/h at a vacuum of up to 38 000 Pa !!! Filtration area of 50m2 Inlet diameter : 100 mm Complete with , pneumatic gate valve , silencer and partial piping.

Condition: good (used), Technical Data of the Pallet Racking System: Racking system: SSI Schäfer Type: PR 600 Technical Data – Installation: Number of racking rows: 01 unit Length per racking row: 17,040 mm Number of bays per row: 06 units Number of levels plus ground level: 06 units Technical Data – Capacity: Pallet spaces per bay: 21 units Pallet spaces per racking row: 126 units Total pallet spaces: 126 units Max. bay load: 19,000 kg Lowest clear shelf height: 1,080 | 880 mm Assumptions: Load carrier: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Total height incl. pallet: n.d. Weight per pallet (max.): 1,055 kg Scope of supply: 07x pallet rack frames, used Material finish: sendzimir galvanized Frame type: P215 Profile dimensions: 120 x 100 x 2.5 mm Including horizontal and diagonal braces, and base plates Ihedpfx Abeyfg Hmorou The frames are pre-assembled (bolted lattice) Height: 14,100 mm Depth: 1,050 mm 72x pallet rack beams, used Material finish: RAL 4002 red violet Box profile: 120 x 50 mm Beam type: TRV1-270-125-30 CE Clear span: 2,700 mm Connector: 5 HK (hooks) Maximum load per pair of beams: 3,165 kg, with uniformly distributed load Note: The functionality of the beams is fully ensured in spite of holes. SSI project with heat baffles mounted as per manufacturer's specifications! 144x safety pins, used Material finish: sendzimir galvanized For securing beams against inadvertent lifting 28x wedge anchors, new Manufacturer: Hilti Model: HST2 V3 M12x105 5-25 Design: carbon steel, galvanized Approved for: cracked concrete 14x shims, used Finish: fully galvanized For leveling the rack frames when installing on uneven surfaces 01x load capacity sign with field and shelf load details, manufacturer and job number dimensions: 420 x 297 x 3 mm Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is only available for collection. Delivery or shipment is possible at extra cost, which can be quoted separately depending on the delivery location and the scope of delivery.

Condition: good (used), Technical data for the pallet racking system: Racking system: Alser Type: NS Technical data for installation: Number of racking rows: 01 pc Length per racking row: approx. 11,720 mm Number of bays per row: 06 pcs at 1,860 mm each Number of levels plus ground level: 03 pcs Ihsdpfxeydpdrj Abrju Technical data on capacity: Pallet spaces per bay: 06 pcs Number of pallet spaces per row: 48 pcs Total number of pallet spaces: 48 pcs Based on: Load carrier: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Total height including pallet: n/a Max. weight per pallet: approx. 1,000 kg Included in scope of delivery: 07x pallet racking frames, used Colour: brown Profile section: C80 x 40 x 15 x 2.00 mm Including horizontal and diagonal braces, base plates The frames are pre-assembled Max. bay load: 4,000 kg at buckling height: 1,250 mm (min. 5 bays per row) (welded truss design) 4,900 mm high, 1,050 mm deep 36x pallet racking beams, used Colour: orange Profile section: S 110 x 55 mm Beam type: B113 Connector: 2 HK Clear span: 1,860 mm Max. load per pair of beams: 1,500 kg with evenly distributed load 72x locking pins, used Finish: sendzimir galvanized For securing the beams against unintentional lifting 28x anchor bolts, new Manufacturer: Hilti Model: HST2 V3 M12x105 5-25 Finish: carbon steel, galvanized Approved for: cracked concrete 14x shims, used Material: sendzimir galvanized For leveling racking frames installed on uneven surfaces 01x load capacity sign Indicating bay and shelf loads, manufacturer, and order number Dimensions: 420 x 297 x 3 mm Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered exclusively for collection. Any additional transport or shipping of this item is subject to additional costs, which can be quoted according to delivery location and scope upon request.

Condition: used, Year of construction: 2007, machine/vehicle number: 1369, Einbrenn-System Kodak TSO-850 High-Speed Thermo-System / Baking-System Kodak-TSO-850 High-Speed Thermo-SystemYear 2007 - Serial-No. 1369 Arbeitsbreite / Working width max. 850mm Elektrischer Anschluss / Power supply: 400V / 50Hz / 40A Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Ijdpjh Aya Iofx Abrshu Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: good (used), Resato HBU-B160 Gas High-Pressure Workshop Test System The oil and gas industry revolves around the production of crude oil and natural gas. One of the challenges is to optimally utilize the equipment to produce more from the available resources. Various high-pressure applications can contribute to this. Pressure testing guarantees the quality and safety of oil and gas production components. The well is stimulated by injecting a chemical fluid. High-pressure systems control and regulate back pressure and fluids with the control system. This allows oil and gas to be produced more safely. Ihedpfx Absr Hmihjrju Manufacturer: Resato HBU Test System Type: HBU-B160 Max. pressure: 200 bar Max. capacity: 1570 cc / Max. pressure: 7 bar 2 x Gas cylinder holders 3 x Gas cylinder trolleys Digital control panel missing Financing through our bank is also possible. komplett-konzept.leasingo.de Find more items - new and used - in our shop! International shipping costs on request!

Condition: good (used), Technical Data for the Pallet Racking System: Racking System: SSI Schäfer Type: PR 600 Technical Data for Installation: Number of rack rows: 01 pc Length per rack row: 22,440 mm Number of bays per rack row: 06 pcs Number of levels incl. ground level: 06 pcs Technical Data for Capacity: Pallet spaces per bay: 28 pcs Pallet spaces per rack row: 168 pcs Total pallet spaces: 168 pcs Assumptions: Load carrier: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Total height incl. pallet: n.d. Max. pallet weight: 900 kg Max. bay load: 19,000 kg Lowest clear storage height: 1,080 | 880 mm Scope of delivery includes: 07x Pallet rack frames, used Material finish: Sendzimir galvanized Frame type: P215 Profile dim.: 120 x 100 x 2.5 mm Including horizontal and diagonal braces, and base plates Frames are pre-assembled (bolted construction) Height: 14,100 mm Depth: 1,050 mm Ihedpfoyc S Tajx Abrju 72x Pallet rack beams, used Material finish: RAL 5010 gentian blue INP profile: 120 x 58 mm Beam type: TRV1-360-12-l Connector: 4 hooks Clear width: approx. 3,600 mm Max. load per pair of beams: 3,600 kg, with evenly distributed load 144x Locking pins, used Material finish: Sendzimir galvanized For securing the beams against unintentional removal 28x Bolt anchors, new Manufacturer: Hilti Model: HST2 V3 M12x105 5-25 Design: Carbon steel, galvanized Approved for: cracked concrete 14x Levelling plates, used Design: fully galvanized For leveling rack frames that are set up on uneven floors 01x Load sign with specifications for bay and compartment loads, manufacturer, and commissioning number Dimensions: 420 x 297 x 3 mm Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is available for collection only. Transportation or shipping of this item is subject to additional costs, which can be quoted separately depending on the delivery location and order volume.

Year of construction: 1989, condition: ready for operation (used), High pressure pump ABEL PC57.1S Article no.: RE-HU-2019-1102-P51e Machine: High pressure pump Type: ABEL PC57.1S Ihjdpfx Abed Hiwijrou Mach.-Nr.: 12042E9 Capacity: 18 m3/h Pressure: 100 bar Motor: 75 kW

Condition: ready for operation (used), Year of construction: 2005, operating hours: 6,671 h, functionality: fully functional, pressure: 2,500 bar, operating pressure: 2,500 bar, fuel: diesel, rotational speed (max.): 1,800 rpm, Hammelmann HDP484 with Caterpillar C16, 2500 bar, 89 l/min Ihsdpfeyidgpjx Abrsu

Condition: excellent (used), Year of construction: 2008, operating hours: 530 h, HDP 253 Year 2008 1650/80 Ihjdsylb Urepfx Abrou 1350/96

Condition: as good as new (ex-display), Used High Pressure Concrete Nailer HN 25 C2 MAX Powerlite The HN25C2 is a compact nailer for concrete and steel, allowing you to work as close as 6 mm from the edge, making it ideal for tight corners. Its main area of application is work on metal stud framing. The nose of the HN25C2 is compact, meaning you can also work with thin metal profiles. With special nails, it can penetrate steel up to 5.0 mm thick or drive nails into concrete with a compressive strength of 60 N. Technical specifications: • Operating pressure: 12–25 bar • Nail length: 15–25 mm • Magazine capacity: 100 nails • Air consumption: 1.6 ℓ/cycle at 18 bar operating pressure • Weight: 2.0 kg The nailer was used for demonstration purposes and is therefore classified as used. It is in perfect technical condition. Supplied in a transport case with user manual. For further details, please refer to the pictures. You will receive an invoice with VAT shown separately. Payment in advance (bank transfer) only – no PayPal! Ihodpfx Abeyizrforou Collection from our shop is of course also possible. Shipping by UPS – shipping costs €8.90. If you have any questions, please do not hesitate to contact us.

Condition: excellent (used), Technical data for the pallet racking system: Racking system: Nedcon Type: NS Technical data for installation: Number of racking rows: 01 unit Length per racking row: 14,100 mm Number of bays per row: 05 units Number of levels incl. ground level: 05 units Technical data on capacity: Pallet spaces per bay: 18 units Number of pallet spaces per row: 90 units Total number of pallet spaces: 90 units Based on: Load carrier: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Total height incl. pallet: n.d. Max. weight per pallet: 1,000 kg Scope of delivery includes: 06x pallet rack uprights, used Material color: cream white Frame profile: 1007825 Profile dimension: 100 x 78 x 2.5 mm Adjustment grid: 50|50 mm Incl. horizontal and diagonal braces, foot plates The uprights are pre-assembled (bolted lattice design) Upright height: 9,000 mm Upright depth: 1,100 mm 50x pallet rack beams, new Material color: RAL 2008 light red orange Box profile: 110 x 40 mm Beam type: CC1104015A Steel quality: 275 MPa Connector type: PR2-4HK40 L 198 mm Weld-on height: 40.00 mm Clear span: 2,700 mm Max. load per pair of beams: 3,000 kg (with evenly distributed load) 100x safety pins, new Material finish: sendzimir galvanized For securing the longitudinal beams against unintentional lifting 24x anchor bolts, new Iedpfoyb Ib Djx Abrjhu Manufacturer: Hilti Model: HST2 M12x105/10 Specification: carbon steel, galvanized Approved for: cracked concrete 12x leveling plates, used Specification: fully galvanized For leveling the racking uprights installed on uneven floors 01x load sign With details regarding bay and shelf loads, manufacturer, and order number Dimensions: 420 x 297 x 3 mm Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for collection only. Transport or shipping beyond this is associated with additional costs, which can be requested separately from us depending on the delivery location and scope of delivery.