Used High Pressure Coolant Systems for sale (56,387)

Condition: used, Year of construction: 2022, filter unit . . make HYDAC Gjdpfxezfqgie Am Esbw type FLND KS 400 DDF 50 C 1.2 /-B7 operating pressure max. 25 bar Receiver 2x 3,10 L make GRUNDFOS type MTR3-27/27 A-W-A-HUUV frequency 50 Hz Power 2,20 kW turning speeds 2.863 U/min Headroom 131 m Headroom max. 179 m feed pressure max. 25 bar Temperature max. 90 °C 0 Counter-Clockwise (CCW) dimensions of the machine ca. 0,6 x 0,6 x 1,2 m High-pressure Cooling Retrofit / Conversion Kit for NLX Machines Filter Pump Combination 15 bar GRUNDFOS / HYDAC - NEW and in original packaging consisting of: - HYDAC filter unit 15 bar - GRUNDFOS pump 15 bar - Electrical component kit - pre-assembled

Condition: used, Year of construction: 2011, operating hours: 3,690 h, functionality: fully functional, machine/vehicle number: W09D500THBAD43025, operating pressure: 500 bar, total length: 3,695 mm, high-pressure hose length: 50,000 mm, total height: 2,026 mm, total width: 2,050 mm, pressure: 500 bar, empty load weight: 1,695 kg, input voltage: 12 V, fuel: diesel, heating capacity: 115 kW (156.36 HP), overall weight: 2,900 kg, water tank capacity: 1,000 l, fuel tank capacity: 50 l, power: 32.4 kW (44.05 HP), temperature: 150 °C, DGUV certified until: 11/2028, Dynajet 500TH Gbodpfjz Eg Dhox Am Esw 28 l/min at cold water Maximum pressure: 500 bar 3695 operating hours Recently serviced Imported to Sweden in 2026 WITH HOT WATER UP TO 150°C!!!

Year of construction: 2025, condition: as good as new (ex-display), IMMEDIATELY AVAILABLE!! Manual cleaning is performed using special gloves in the front area. The effectiveness of the cleaning process is ensured by a high-pressure pump and a special spray nozzle. In these devices, a temperature of up to 60 °C can be set for the cleaning fluid. The pressure is adjustable from 1 to 80 bar. Technical data: Working area: 950 x 700 mm Internal height: 450 mm Load capacity: 70 kg, optionally up to 150 kg Godpfxjf A Nqqe Am Ejbw Spray pressure: adjustable from 1 to 80 bar Tank volume: 75 liters / heating power 2 kW Standard version: • Blow gun inside the chamber • Frame, feet, lid, and housing made of stainless steel • Removable stainless steel sheets above the tank • Upward-opening flap with 2 handles and gloves • Window made of tempered glass • Door opening/closing system with gas spring support • Door opening monitoring via safety limit switch • Filter on the suction side of the pump (500 microns) • Foot switch for operating the cleaning pump • Internal lighting • Neoprene gloves, length 600 mm (chemical resistant) • Adjustable feet +/- 50 mm • External mini pneumatic oil separator

Condition: new, Year of construction: 2022, functionality: fully functional, Start-stop automatic system with a 30-second after-run time Crankshaft pump with fully ceramic pistons and stainless steel valves, coarse dirt filter, pressure regulator valve. Gsdez Sq Irepfx Am Eobw 70kW green boiler for increased efficiency >92% Low CO2 emissions, low CO emissions, Up to 18% fuel savings, low maintenance costs With electric preheating up to 40°C. Includes 10m high-pressure hose, stainless steel spray lance with high-pressure nozzle and swivel fitting, gun with swivel fitting. Pressure: 30-220 bar, Water flow rate: 180-960 l/h, Temperature control: 30-150°C Power consumption: max. 7 kW Voltage: 400V, 50Hz, max. 13A Speed: 1450 rpm Fuel tank: 50 liters Weight: 240 kg Dimensions: 119.8 x 72.6 x 115.2 cm

Condition: used, 3D Systems Type: ProX™ 800 ProX™ 800 3D production printer from 3D Systems – high-performance SLA printer The system has been regularly maintained. Operating hours: 18,700 (as of April 18, 2023) Not in operation after April 18, 2023. Note: Annual maintenance performed until decommissioning. For sale is a used ProX 800 stereolithography (SLA) production printer from 3D Systems. This large-format SLA system is equipped with state-of-the-art print head technology and is suitable for highly precise components and industrial applications (e.g., automotive, aerospace, medical technology). Additional features: Automatic material replenishment system and pre-configured material supply module (fast module change, uninterrupted operation) 3D-Manage™ software for CAD model and print job control Touchscreen control on the device (Print3D Pro™) Status/signal light module, central user guidance Comprehensive safety system including laser safety monitoring (Class I), emergency stop switches, and locking mechanisms Detailed maintenance and troubleshooting functions Material container (MDM) Technical data: Printing technology: Stereolithography (SLA) with frequency-tripled Nd:YVO4 UV solid-state laser (355 nm, max. 3 W) Maximum build volume: approx. 650 × 750 × 550 mm Dimensions (L × W × H): approx. 1370 × 1600 × 2260 mm Weight: approx. 907 kg Resolution: up to 0.00127 mm (laser spot size), 4000 DPI Accuracy: ± 0.025–0.05 mm per inch Materials: wide selection of Accura resins (durable, transparent, high-temperature resistant, biocompatible, etc.) Electrical connection: Power supply: 200–240 V AC Gsdpfx Aszii Umsm Ejbw Frequency: 50/60 Hz Phase: single-phase connection Fuse: 30 A Weight: approx. 1200 kg including material module Condition: used Scope of delivery: (See image) (Subject to changes and errors in the technical data!) We would be happy to answer any further questions you may have over the phone.

Condition: used, Year of construction: 2010, fuel type: diesel, power: 88 kW (119.65 HP), gearing type: mechanical, color: white, number of standing places: 3, Equipment: 3rd hydraulic function, ABS, airbag, all-season tires, lighting, trailer coupling, I am offering a Peugeot Boxer diesel panel van, 2.2 / 88 kW, first registered in July 2010, with 171,000 km, a 6-speed manual transmission, and a trailer hitch. It is being sold because I am switching to different technology. !The vehicle does not have a valid MOT (technical inspection), is registered, and is ready to drive. Godpfozwmfrjx Am Esbw It has green license plates! The vehicle is equipped with a belt-driven auxiliary drive and a Dynaset HPW hydraulic high-pressure water pump. It includes a high-pressure cleaning system up to 180 bar, a high-pressure lance, a 1000-liter tank, and automatic hose retraction. Signs of wear are present.

Year of construction: 1996, condition: good (used), machine/vehicle number: 96.01112.1496, Stationary high-pressure pump unit Hammelmann HDP 112, mounted on a base frame. Similar to, but not a Kamat, Uraca, or Woma. Pump type: HDP 112 Operating pressure: 300 bar Flow rate: 153 l/min Drive speed: 1500 rpm Drive power: 90 kW with VEM motor 90 kW, 3-phase, IP55 with pressure regulating valve with safety valve with oil cooling system Dimensions L x W x H: approx. 2300 x 1000 x 1400 mm Weight: approx. 1500 kg Godpfx Amjhtnnis Ejbw Year of manufacture: 1996 Condition: in good used condition.

Condition: good (used), Year of construction: 2020, operating hours: 217 h, functionality: fully functional, machine/vehicle number: 62006078, operating pressure: 2,800 bar, total length: 4,670 mm, high-pressure hose length: 10,000 mm, total height: 2,540 mm, total width: 1,970 mm, pressure: 2,800 bar, empty load weight: 2,750 kg, fuel: diesel, overall weight: 2,750 kg, water tank capacity: 160 l, fuel tank capacity: 200 l, power: 160 kW (217.54 HP), volume flow: 1.62 m³/h, noise level: 111 dB, Equipment: crane, DYNAJET UHP 220 2800 | 2020 | Low Hours This DYNAJET UHP 220 2800 from 2020 is available in excellent condition and has only 396 engine hours and 216 high-pressure hours, making it a highly attractive alternative to a new unit. Delivering up to 2,800 bar and 27 l/min, the UHP 220 is designed for the most demanding water jetting applications, including paint removal, rust removal, concrete rehabilitation, and industrial surface preparation. Powered by a reliable 220 HP Volvo industrial diesel engine, the machine combines exceptional performance with low operating costs and proven durability. The integrated DYNAJET Easy Control II system allows precise pressure adjustment and simple operation, while the twin-axle trailer ensures easy transport between job sites. With its low operating hours and robust DYNAJET construction, this machine is ready for immediate work and many years of productive service. Key Features and Advantages: *Model year 2020 *Only 396 engine hours *Only 216 high-pressure hours Godpfx Amoz D Ew Ro Ejbw *Operating pressure up to 2,800 bar *Maximum flow rate 27 l/min *220 HP Volvo industrial diesel engine *DYNAJET Easy Control II with colour display *Low-speed high-pressure pump with carbide plungers *Large fuel tank for extended operation *Twin-axle trailer for easy transport *Ideal for paint removal, rust removal and concrete removal *Fully operational and ready for immediate use For pricing, availability, or further technical information, please contact us.

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 10 h, functionality: fully functional, machine/vehicle number: 240202088, total width: 1,300 mm, total length: 700 mm, total height: 2,550 mm, overall weight: 350 kg, water tank capacity: 120 l, noise level: 70 dB, input voltage: 400 V, water pressure: 200 bar, pump capacity: 14 l/min, working width: 1,100 mm, Equipment: type plate available, High-pressure washing booth (new installation), working area 1100mm x 650mm. Temperature range adjustable from 0-45°C. Gbsdpezlp Ifjfx Am Ejw The system features a chip screen and filter. In the washing area, the system is equipped with a high-pressure lance and an air blow gun. Stainless steel AISI304, steam extraction, water level sensor.

Condition: excellent (used), Year of construction: 2008, Stationary high-pressure pump unit Hammelmann HDP 127 on a base frame. Similar to, but not a Kamat, Uraca, or Woma. Pump type: HDP 127 Operating pressure: 600 bar Flow rate: 66 l/min Drive speed: 1500 rpm Drive power: 74 kW with SCHORCH KA7280S-BB01B-Z 3~ IP55 75kW electric motor, with pressure regulating valve, with safety valve, Gsdpfx Aeh Uc Iujm Eobw with oil cooling system. Dimensions L x W x H: approx. 1,700 x 1,000 x 1,300 mm Weight: approx. 1,300 kg Year of manufacture: 2008 Condition: In very good used condition.

Condition: used, High-pressure industrial water pumps – 90 kW – 55 bar – 33 m³/h Available: No. 2 high-pressure multistage industrial pumps for water lifting, complete with three-phase asynchronous electric motor and installation base. The pumps are from a snowmaking plant and are in good overall condition, ideal for reuse in pumping stations, process systems, or pressurization plants. Technical data Pump: Flow rate: 33 m³/h Head: 55 bar Type: High-pressure multistage pump Mounted on skid with flexible coupling Electric motor: Type: Three-phase asynchronous Power: 90 kW Voltage: 400 V Current: 167 A Speed: 2970 rpm Duty: S1 (continuous) Equipment supplied: - Industrial mounting base - Motor-to-pump flexible coupling - Complete assembly ready for installation - Identification nameplates present Typical applications: - Industrial water pumping stations Gbsdpfxoytgvws Am Ejw - Pressurization systems - Process plants - Fire-fighting systems - Artificial snowmaking plants - Industrial washing installations 2 identical units available.

Condition: used, Year of construction: 2016, Coolant cleaning system Manufacturer: Zyklomat Type: ZKR 14/350 Year of manufacture: 2016 For cleaning grinding emulsion Supply with max. approx. 250 L/min. at approx. 3.5 bar water Pumping to the filter system is carried out on-site, air and foam-free. Temperature max.: 50°C Cleaning capacity: 350 L/min. Recirculation from the clean tank to the dirty tank: 100-350 L/min. Machine supply max.: 250 L/min. Filtration principle: ZYKLOMAT high-performance hydrocyclone Z1B-9/3 Particle separation limit: approx. 5 µm Medium: Emulsion 3-6% Operating temperature: Ambient temperature Solid particle volume: approx. 5.14 m3 Operating volume max.: approx. 4.58 m3 Operating volume min.: approx. 3.60 m3 Process sequence: fully automatic full-flow filtration Sludge discharge: fully automatic, with consistent texture The dirty liquid is supplied via on-site pumping stations. The chips and fine sludge produced during grinding (grinding swarf, scale, corundum) are discharged via a scraper conveyor. In the upper scraper section, the sludge is pre-dried. Filtration takes place via ZYKLOMAT high-performance hydrocyclones. The system operates fully automatically. Maintenance: annual maintenance Availability: 10-2026 Double scraper tank for discharging grinding sludge Type: KR 1.75-5.1 Total volume: approx. 5.14 m3 Volume max.: approx. 4.58 m3 Length: approx. 4,000 mm, incl. 70 mm stiffening Width: approx. 1,890 mm, incl. 140 mm stiffening Height: approx. 1,105 mm, incl. 100 mm base profile Neck height: approx. 2,300 mm Theoretical discharge volume max.: 15 kg/h Function: Coolant storage tank with integrated clean tank, sedimentation and flotation tank with fully automatic sludge discharge. 1 spur gear motor Voltage 400 V, 50 Hz, IP 54 as scraper drive 3 connection nozzles for return lines from three machines 1 clean liquid tank, integrated in the rear of the scraper tank. Oil-tight welded, with an internal circumferential bevel gear, various cover plates (non-walkable plates screwed onto an angle frame), without ladder, without railing, without internal access rungs Volume max.: approx. 0.55 m3 121126ä Gbodpfx Ajzwccmom Ejw

Year of construction: 2010, operating hours: 1,480 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: 1873076, We are offering this very well-maintained Uhde high-pressure pump for waterjet, HPS 4022, year of manufacture 2010. Manufacturer: Uhde High-Pressure Pump for Waterjet Model: HPS 4022 Year of Manufacture: 2010 Condition: Very good Category ID: 34 Machine Type: Uhde HPS Waterjet High-Pressure Pump If you have any questions or require further information, please feel free to send us a message or give us a call. Gedpfx Ameygmhto Eobw

Condition: used, Year of construction: 2011, operating hours: 8,176 h, functionality: fully functional, machine/vehicle number: WPUD500H0B2000955, operating pressure: 500 bar, total length: 3,650 mm, high-pressure hose length: 50,000 mm, total width: 2,070 mm, pressure: 500 bar, empty load weight: 1,630 kg, input voltage: 12 V, fuel: diesel, overall weight: 2,900 kg, water tank capacity: 1,000 l, fuel tank capacity: 50 l, power: 34.5 kW (46.91 HP), DGUV certified until: 10/2026, Dynajet 500TH 30 l/min Gbjdpfx Amoz Egw Uo Eew Maximum pressure: 500 bar 8176 operating hours Regularly maintained, recently serviced, not in operation during winter (only April–October) Owned by the same operator since new For cold water only; can be retrofitted for heating water.

Condition: used, Year of construction: 2019, operating hours: 3,420 h, functionality: fully functional, machine/vehicle number: W09FAL226KMF14072, operating pressure: 500 bar, total length: 2,700 mm, total height: 2,100 mm, total width: 2,100 mm, pressure: 500 bar, empty load weight: 2,600 kg, input voltage: 12 V, fuel: diesel, heating capacity: 198 kW (269.20 HP), overall weight: 2,600 kg, water tank capacity: 400 l, fuel tank capacity: 220 l, temperature: 100 °C, volume flow: 1.8 m³/h, noise level: 100 dB, pressure (max.): 500 bar, Falch Trail jet 30 500-30-95-d high-pressure cleaner, year of construction 2019. The machine runs at a pressure of 100 - 500 bar and a temperature of 10⁰c - 100⁰c. Its has a remote control feature to remotely control temp, pressure and on and off. Also it comes with the front storage box. The machine has been fully serviced and maintained by falch. It has been well looked after with one owner from new. Manufacturer: Falch Model: Trail jet 30 500-30-95-d Godjy Sazfjpfx Am Ejbw Construction year: 2019 Serial number: G57200378 EU type number: e1*2007/46*0386*01 Identification number: W09FAL226KMF14072 Weight: 2600 kg Vertical load: 120 kg Axle 1 load: 1300 kg Axle 2 load: 1300 kg If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: like new (used), functionality: fully functional, Year of construction: 2024, operating hours: 100 h, control type: manual, degree of automation: semi-automatic, actuation type: electric, controller manufacturer: ABB, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, type of cooling: water, compressed air connection: 8 bar, Equipment: centralized greasing system, cooling unit, documentation/manual, emergency stop, High Pressure Unit 90PW3 for Sale Model: 90PW3 (explosion-proof motor) Manufacturer: Power (Tianjin) Technology Co. Key Technical Specifications - Maximum pressure: 140 MPa (extendable to 276 MPa by changing the hydraulic head) - Rated flow: 30 L/min - Rated power: 90 kW - Transmission ratio: 2.75:1 - Rated speed: 530 RPM Gsdpfx Amjyxy D To Esbw - Plunger diameter: 18 mm - Dimensions: 2000 × 1200 × 800 mm - Weight: 1200 kg Main Components Included - 90PW3 high-pressure triplex pump - Explosion-proof motor - Flexible pin coupling - Booster centrifugal pump (feed) - Bag filter + Y-strainer - Pneumatic valve (automatic opening at 55 MPa) - Control panel with indicators - ABB soft starter - Water storage tank with level control (IFM sensor), PLC-controllable pneumatic intake valves Technical Advantages - Forced lubrication – prevents overheating due to friction - "Super simple" maintenance: quick removal of packing and valves

Condition: like new (used), Year of construction: 2026, operating hours: 40 h, functionality: fully functional, pressure: 2,500 bar, year of last overhaul: 2026, We are selling our IBAK MicroGator with a UHP high-pressure water cleaning system for main pipelines DN 200–DN 800. The robot was only used for one project and has not been used since. * Only 4 months old * Used for only 5 working days * No signs of wear – like new * Equipped for Ultra High Pressure (600–2500 bar), compatible with Falch and Hammelmann * Original price: €66,000 * Our price: €50,000 (negotiable) The robot is currently located in the Czech Republic. However, after prior arrangement, it can also be made available in the Cham area in Bavaria. Gsdpfx Aoz Aupijm Esbw Filip Khol rohrsanierung1a.de

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: UH9D034K0SADY1001, operating pressure: 500 bar, total length: 3,710 mm, high-pressure hose length: 500 mm, total height: 2,080 mm, total width: 2,070 mm, pressure: 500 bar, fuel: diesel, heating capacity: 91 kW (123.73 HP), overall weight: 1,525 kg, water tank capacity: 1,000 l, warranty duration: 12 months, fuel tank capacity: 70 l, power: 42 kW (57.10 HP), temperature: 95 °C, volume flow: 1.8 m³/h, noise level: 108 dB, pressure (max.): 500 bar, Equipment: chassis, We currently have 3 units of this machine in stock and available for immediate delivery. This diesel-powered turnkey hot water high-pressure unit is built for demanding professional and industrial cleaning applications where performance, durability, and reliability are essential. With an operating pressure of 500 bar and hot water output of up to 95°C, the machine is designed for efficient removal of heavy dirt, coatings, and industrial residues. Mounted on a robust heavy-duty chassis, the unit is suitable for use in challenging working environments within construction, industry, and professional service operations. The integrated 1000 L water tank and 70 L fuel tank allow for long operating intervals with reduced downtime, while the 91 kW heating system ensures a stable hot water supply during continuous operation. The machine combines strong cleaning performance with practical mobility and a durable construction, making it a reliable solution for customers who require high efficiency and consistent results in daily use. Key features and advantages: * 3 units available from stock * 500 bar operating pressure Gbodpjzat T Nefx Am Esw * Hot water temperature up to 95°C * Large integrated 1000 L water tank * 70 L fuel tank * Powerful diesel heating system with 91 kW heating capacity * Heavy-duty chassis for easy transport and onsite flexibility * Suitable for demanding industrial and professional cleaning tasks * New machine – fully functional and ready for operation Please contact us for further information, pricing, or availability.

Condition: used, Band filter system, coolant treatment system, coolant filter AME - AMADA type PS 100 Gravity-fed paper band filter Manufacturer's number 12918, year of manufacture 2017 Filter capacity for emulsion: approx. 100 l/min. Filter capacity for oil: approx. 70 l/min. Tank capacity: max. 300 liters Width of the filter fleece roll: 710 mm Overall height of the filtration unit: 560 mm Submersible pump motor power: 0.24 kW Submersible pump flow rate: 100 l/min. Submersible pump pressure: 0.7 bar Power connection: 400 Volt, 50 Hz. - Submersible pump BRINKMANN, type TB 100 - Tank with 3 float switches - Sight glass for fill level - Filter fleece roll housed in a box with a lid - Float switch for filter fleece chain drive - Contamination collection container for filter fleece - Can be moved with a pallet truck, both longitudinally and transversely Space requirement: L x W x H 1700 x 920 x 1100 mm Weight: 230 kg Very good condition Application: Compact filter for coolant, equipped with a roll of filter fleece for cleaning coolants in machining operations. Self-contained cleaning unit, also in combination with chip conveyors, e.g. on machining centers, or as a local filter for several machine tools. Also suitable for grinding machines. Function: Dirty liquid flows into the filter basin and, after passing through the filter fleece and support belt, flows into the clean tank. The retained dirt particles build up a filter cake and increase the flow resistance – the level rises. When a defined height is reached (via a float switch), the band drive is activated, bringing clean filter fleece onto the filter surface. The flow rate increases, and the level of the dirty liquid decreases again. Gbedpfx Amo Agw Ege Eow The contaminated fleece ends up in a dirt and sludge container.

Condition: used, Ecat ovo compact EG10 In-Ovo vaccination pressure injection system, embryo injection system. For modern hatcheries, the Egginject® Compact, thanks to its dual-pressure injection system, enables safe in-ovo vaccination. The Egginject dual-pressure injection system is a patented technology that allows for individual adjustment of the injection depth for each individual embryo, regardless of size and age. The compact Egginject allows for vaccination in small and medium-sized hatcheries. - Adaptable to all types of incubation trays. - Reliable and robust design for high loads. - Easy to use: simple and user-friendly. - Can be used as a stand-alone unit or fully integrated into the hatchery automation line. Gjdpfx Amsdx Axlo Eebw Year of manufacture: 2013 Item condition: used

Condition: reconditioned (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: B5.00172.1454, total width: 850 mm, total length: 2,000 mm, total height: 1,450 mm, pressure: 340 bar, operating pressure: 340 bar, type of input current: three-phase, overall weight: 1,700 kg, rotational speed (max.): 1,500 rpm, empty load weight: 1,700 kg, power: 147 kW (199.86 HP), year of last overhaul: 2026, pump capacity: 239 l/min, Equipment: type plate available, Stationary high-pressure pump unit Hammelmann HDP 172 mounted on a base frame. Similar, but not Kamat, Uraca, or Woma. Pump type: HDP 172 Operating pressure: 340 bar Flow rate: 239 l/min Drive speed: 1500 rpm Drive power: 147 kW with SIEMENS 160 kW 3-phase motor, IP55 Gsdpfxsyablme Am Ejbw Dimensions (LxWxH): approx. 2000x850x1450 mm Weight: approx. 1700 kg Year of manufacture: 2015 Condition: New piston seals installed and valves inspected in January 2026. In very good used condition.

Condition: used, Year of construction: 2015, operating hours: 5,201 h, functionality: fully functional, machine/vehicle number: W09HKF1011SHB8027, operating pressure: 550 bar, total length: 3,950 mm, high-pressure hose length: 50 mm, total height: 1,880 mm, total width: 1,870 mm, empty load weight: 1,200 kg, fuel: diesel, overall weight: 1,800 kg, water tank capacity: 500 l, noise level: 93 dB, DGUV certified until: 03/2027, Oertzen PT500 30 l/min Maximum pressure: 500 bar 5200 operating hours Gbjdez Ega Nspfx Am Ejw Regularly maintained, recently serviced, not operated in winter (only April–October) Owned by the same operator since new For cold water only; heating element has been removed.

Year of construction: 2018, condition: excellent (used), machine/vehicle number: B8.01142.0395, Stationary high-pressure pump unit Hammelmann HDP 142 on a base frame. Similar to, but not a Kamat, Uraca, or Woma. Pump type: HDP 142 Operating pressure: 610 bar Flow rate: 78 l/min Drive speed: 1500 rpm Drive power: 86 kW with AC M 280 M-4/HE electric motor, 90 kW, IP55, with pressure regulating valve, with safety valve, with oil cooling system. Gedpeh E Dgzjfx Am Ejbw Dimensions L x W x H: approx. 1,700 x 850 x 1,450 mm Weight: approx. 1,200 kg Year of manufacture: 2018 Condition: after service by Hammelmann in October 2020, it has only been in operation for a few weeks and has been out of service for more than a year. In very good used condition.

Condition: ready for operation (used), Year of construction: 1982, machine/vehicle number: 16-176-82, power: 50 kW (67.98 HP), input voltage: 380 V, input current: 12 A, input frequency: 50 Hz, type of input current: AC, control type: manual, actuation type: electric, fuel type: electric, Equipment: documentation/manual, Two used high-frequency (HF) machines from the manufacturer AMYSA-YVERDON SA, type AM 176, are for sale. These machines are particularly suitable as sources of spare parts, for retrofitting, or as a basis for a customized rebuild. They are offered in their current condition, as shown in the photos. Machine 1 Manufacturer: AMYSA-YVERDON SA Type: AM 176 Machine number: 16-176-82 Voltage: 380 V / 50 Hz Power: 7.5 kVA Current consumption: 12 A Machine 2 Manufacturer: AMYSA-YVERDON SA Type: AM 176 Machine number: 03-176-82 Voltage: 380 V / 50 Hz Power: 6.5 kVA Gjdpez A E Ersfx Am Eebw Current consumption: 10 A The existing mechanical, hydraulic, and electrical components, as well as the installed control systems, are included in the offer. The HF generators and resonant circuits are not included in the offer. These are older, used industrial machines. Complete functionality is not guaranteed. An inspection can be arranged by appointment. The machines are currently being disassembled. Collection by the buyer at the location in the Basel region, Switzerland. Price: CHF 2,500 per machine, negotiable Package price for both machines available upon request. Sale from the location, without warranty and excluding any liability for defects.

Year of construction: 2018, condition: excellent (used), functionality: fully functional, Dust control/high-pressure misting system 2 misting cannons, each with 30 nozzles Gbjdpfx Aoz A Tclsm Eow Separate container with central unit, electrical system, IBC water tank, and high-pressure line.