liter capacity: - l
filtration performance: 1200 l/min
control: SPS S7-313
tank capacity: 7000 l
container volume: 9 m³
total power requirement: 41 kw
weight of the machine ca.: 2800 kg
dimensions L x W x H: 4,4 x 2,0 x 3,01 m
Deep bed filtration system
Filtration of coolants for up to three machining centers
Control PLC with Operator Panel OP 7 Simatic
Medium 4% water - oil emulsion
machine consists of:
- deeb bed filter type TBF 1300; filter size area 1,55m², fleece wid... more
Suitable for cleaning of carbide from coolant oil
Capacity approx. 790 l, volumetric flow rate max. 50 - 60 l/min., Filter unit: larger than 0,003 mm, connected load approx. 25 kVA (400 V / 50 Hz), dimensions w x d x h= 1940 x 1190 x 1497 mm, weight approx. 900 kg, colour grey.
1 filter tower,
automatic back flushing,
Submersible chiller unit. more
Coolant plant / coolant filter
Main pump 5.5 kw
Printing performance of up to 40 bar
Tank contents approx. 1,300 litres
Filter fleece roll width 700 mm
Height of the filtration 1.400 mm
-simple auxiliary pumps approximately 1.5 kw
-Level indicator via transparent display
-Recording the filter fleece roll in the box with lid
-Float switch for filter fleece chain drive
Space requirement (Lxwxh): 1,700 x 1150 x 2,100 mm
Weight: 600 kg
-hardly in use, was bought about 4 years ago, never used due to job loss, if only trial
-Max 3 bar operating pressure
-max 50 ° C operating temperature
-possible including battery and charger - sightseeing by appointment in Mannheim
-In addition there also the appropriate rods and extensions
Is for sale:
1 piece used coolant cleaning equipment manufacturer: Knoll
Type: AE 1058
Technical data see rating plate.
System could not be tested. Engine was removed only for transport.
Can be visited.
Water treatment system from Merck
Water treatment Millipore Elix essential 3 TPK from Merck.
Optimized processing sequence, excellent water quality, eco-friendly technology, self regenerating resin beds, minimal power consumption, no additional water softener, controlled water consumption thanks to intelligent technology of RO , Storage of clean water in a polyethylene tank, effective protection against air-borne contaminants, preventing bio-films by ASM module, Entnehmung of water through val... more
Water purification system / water treatment Fabr. Rösler type AWA 500 C-SF
Fabr.# 7124-91-04, year 1991
Capacity 500 l / batch
Duennschlammentwaesserunng tandem bag filter
Filter size 2 x 120 l
electrical connection 400 V / 50 Hz
Dimensions L x W x H 1200 x 1200 x 1900 mm
Weight approx. 400 kg
Sturdy reinforced plastic containers made of high-quality polyethylene
-Mixer for processing container
-Compressed air diaphragm pump for sewage promotion
Here we offer a water purification system. Flow rate: 70 L / hr Water Purification Method: RO ASTM Type: ASTM Type II TOC: 30 ppb Depth: 17.4 in Height: 28.9 in Width: 26.1 in Weight: 123 lbs (operational) Additional Specifications Power Supply: 117 V / 60 Hz, 10A, (10A Slo-Blo fuse) 230 V / 50 Hz, 5 A, (10A Slo-Blo fuse) 110 V / 50/60 Hz, 10A, (10A Slo-Blo fuse) system performance Water recovery: up to 50% Water resistivity *: 5 M -cm Water conductivity: 99.9% * CO2 5 M -cm * (Typically 10 -15 ... more
coolant System -second hand-
SCHIMPKE Mod. DK 170V S0
cooling capacity: 17200kcal/h or 20000Watt
P = 6,65kW
coolant medium R 134A - volume 10KILO
Abmessungen L x B x H = 165 x 100 x 160cm
weight: 500kg more
R 565 filter system "Progresso 60P" the medium is forced under pressure through the filter, since I do not know whether the device is completely or if it brings all funtionen I give it a special price of 280th - from Euro (that's the container worth!!!!!)
consisting of Draabe components, Installationschiene, Draabe water purification system pure water to the supplies of process water and the air humidification plant in the pressure hall, water softener, -2 expansion memory, water reservoirs of 400 litres with operating pressure 10 bar, pipework system, increase in pressure (divided), -4 Vernebler CSV simply, -4 Vernebler CSV doubly, note: Container the pure water system must be rented separately by Draabe and every 6-8 months in the piece for m... more
total power requirement:2,0 kW
weight of the machine ca.:0,5 t
dimensions of the machine ca.:12 x 0,6 m
Pipe-diameter on the chuck:20 - 200 mm
Tube length:max. 6000 mm
Pipe cutting machine including a 100 AMP plasma cutting torch and a filter unit.. After a simple input of the cutting dimensions into the machine control, the various cutting shapes of the pipes are burnt out with a plasma burning cut . The powerful and compact pipe cutting machine is especially well suited for small s... more
tank system for Diesel / heating oil 2,000 litres
tank drip pan CHEMO - year of construction 2008
barrel pump Horn with counter and nozzle
performance of pump system 55 litres / minute
electrical data 220 V
space requirements length - 2,800 x depth - 880 x height -
weight approx. 420 kg more
Length of roller conveyors - infeed 0 mm
Length of roller conveyors - outfeed 0 mm
Numbers of cross transfers Stck.
* 3-strand-sling chain RUD VIP
* load capacity 3-strand 42.000 kg
* load capacity at 45° to 60° 3-strand 30.000 kg
* thickness of chain 22 mm
* with shortening hook
* 2 strands with VIP-length adjustment VLE-22
Immediately, the tilting table can be attached before a case sealer. He works as a packing table at an angle of 20 °. When the box is full, the packing table can be tilted automatically in the horizontal position. The tilting of the table using a compressed air cylinder. Then moves the packaged goods on the roller conveyor of the tilt table in the carton sealers.
This solution saves valuable space and implemented an ergonomic working position.
For example, round packages or bottle... more
working length 75 m
Working width 330 mm
Working height 740 mm
roll diameter 48 mm
Wheel width 330 mm
Well-maintained, belt-driven roller track system with steel rollers.
Total length: approx. 75 meters, 25 individual elements per 3 meters,
Width of the track 410 mm, 30 rollers per track.
Since the system is dismantled, not all dimensions can be precisely determined.
1 curvilinear element, 2 inclined conveyor belts, 2 hinged doors for the runway,
1 Packing table with the... more
The engine of a German manufacturer working with ready-made bags. It is suitable E.g. for the packaging of textiles, household and toys, technical articles, as well as printing and paper products. The machine is suitable to the packaging of products with bulky side dishes. It was used for packaging of underwear, pajamas, T-Shirts, shirts, socks and towels.
-Very narrow and high-quality packaging.
Pack resealable or permanently closed depending on the selection of the labels.
-Multiple pack ... more
We have a Buhrs - W+D BB700 14K servo envelope inserting system available. The condition of this machine is excellent. Other feeders and camera's optional possible!
At this moment the original display is broken, Of course this will be replaced and the machine will get the maintenance it requires before being sold.
6 station base
Year of built: 2009
- 6 station base
- Envelope station autoloader
- 3x RF2 rotary feeder
- 1x HF vacuum friction feeder
- Divert bin
- Turning belt
operating pressure: 160 bar
distance between columns: 2000 mm
throat: 1000 mm
operating pressure: pneum. min/max 6/8 bar
operating pressure: hydr. min/max 160/210 bar
voltage: 380/50 V /Hz
table surface area: 1900x1000 mm
height over floor: 1000 mm
tool clamping area: 1600x350 mm
quantity of oil : 400 l
total power requirement: 25,0 kW
weight of the machine ca.: 7,1 t
dimensions of machine: ca. L:2,2xB:3,4xH:2,2 mm
dimensions electric cabinet LxWxH: 1,0x0,3x1,4 m
There are two machines on sale!
Gathering machine Duplo 4000
-with additional equipment and lots of accessories
-Year of construction: 2004
-Dimensions: 36 x 50 cm
-Collator System 4000
-1xZusammentragturm with 10 stops and step,
-mess with suction air flow.
-Duplo brochure plastic - system 3000
-Duplo - trimmer - system 3000
-Machine technically and visually in a good condition
-Delivery by arrangement
-with standard accessories and documents
-Machine in production
Length of roller conveyors - infeed 0 mm
Length of roller conveyors - outfeed 0 mm
Numbers of cross transfers 0 Stck.
weight of the machine ca. 2,3 t
dimensions of the machine ca. 2,3 m
adjustable spreader bar with boom.
cap. of spreader: 30 t
own weight: 2,4 t
cap. of frame: 2,5 t
own weight: 310 kg
sizes of hanging: 190x350 and 140x260. for single hook Nr. 10 und 4 DIN 15401
working length: 2500-4500 mm
working width: 1100-2500 mm
adjusting steps main beam: 10x100 mm
adjusting s... more
5-color-system, incl. clear ink
Speed: up to 100 ppm (A4)
Resolution: 2.400 x 2.400 dpi
Controller/Interface: RIP EFI Fiery
Additions: high capacity feeder, high capacity stacker, various new spare parts, full service
output: 3,5 kVA
current: 7,8 A
voltage: 400/440 V
Cooling capacity: 6000 W
flow temperature ,max.: 20-30 °C
temperature range: 19°- 20° °C
weight of the machine approx.: 130 kg
dimensions L x W x H: 0,45x0,6x1,15 m
2 units available
water pressure max. 10bar
filling weight max. 1,5 kg
connection tube each 1/2"
watertroughput 25l/min with 7,5 bar
on sale as is! more
Emulsion splitting plant oil-water separation system, the cost and long-term reliable solution to the problem is usually the Oel-/Wasser- separation for dispersed condensates. The purified water meets the legal requirements regarding discharge dimensions 750/600HH950 mm Weight 80 kg
Impregnation dip system HOLTEC
good condition, still in operation
Tank internal dimensions 12000 x 1300 x 1500 mm (LWH)
Frame edition 8000 mm long, suitable several short packages
with controls for fully automatic operation
Programming for number of dives and time
Manual operation is also possible
Sale from location Thuringia
Dismantling and shipping optional
5 color system
Speed: up to 67 ppm (A4, 4 col.), up to 267 ppm (A4 black/white)
Resolution: 812 x 812 dpi, 812 x 1,624 dpi im HDI Modus
Interface/Controller:HP Smart Stream Production Pro IN 50
Additions: Chiller, Bidwasher, Full service more
feed pressure: 2 bar
liter capacity: 86-89 l/min
total power requirement: 1;8 kW
weight of the machine approx.: 100 kg
space requirements of the machine approx.: L:.2;1xB:0;75xH.0;29 m
as good as new swarf basins available.
From manufacturer DMG usable for example parts such as machining centers or CNC lathes.
The swarf basins are including 3 pieces coolant pumps (1,9 / 2,0 bar; 50/60Hz; 400V - 1,85A; 0,6/0,9 KW)
swarf basins are mobile
pump capacity for volume flow = 86-89 l/min
Tube clamping system clamps for butt welding machine, butt welding machine mirror welding machine, pipe welding machine, mounting device for pipes-intake of 100-400 mm double-clamping device for pipe mounting dimensions 1000/450/H260 mm Weight 22 kg
Hydraulical dipping plant MÜLLER & SOHN Type 8 HA
used, year of construction 1990
Diemsion of the tank 13,00 x 1,50 x 1,50 m
Raising and lowering hydraulically
more packages can be processed
lifting ramp is 9 m long
13,60 x 2,30 x 3,45 m (LWH)
Ex location nearby Bonn
dismantling and loading on request
liter capacity 250 l/min
tank capacity 2800 l
Coolant high preasure pump 40 bar
Coolant high preasure pump 38,80 l
total power requirement 22,00 kW
weight of the machine ca. 1,50 t
dimensions of the machine ca. 3,30 x 2,00 x H2,00 m
Unit for max. 3 machines.
1x pump 250 l/min
3x High-Pressure-Pump 38,8l/min - 40bar
Flow-Coat System Heine + Range Flowcomat
pouring chamber RANGE + HEINE Flowcomat P,
year of construction 2012
passage height 3100 mm
cabin height approx. 3200 mm
for impregnation, priming, and undercoats
price ex location in Baden-Wuerttemberg, GERMANY
dismantling by us and shipping on demand
Please see our video!
DIDN'T FIND ANYTHING SUITABLE?
Save this search now and we will inform you about new machines free of charge!
All information, offers and prices on this site are subject to change and non-binding!
By using this website, you acknowledge and agree to our Terms & Conditions and Privacy Statement.
All brand names are the property of their respective owners. Thorsten Muschler GmbH
does not accept any liability for the content of linked websites.