Exhaust air cleaning system

KMA SR2200

Condition: new, AGRE ALUP ALLEGRO 14+ 13 270 Speed controlled. Space-saving. Inexpensive. Efficient 1:1 direct drive. Easy operation. Low energy consumption. High performance. Suitable for a wide range of applications. Convincing compressed air quality. Cyclone separator and refrigeration dryer built in. Kedpfjixt I Hox Ab Ujdw Equipment in detail: Compression concept: Oil-lubricated screw compressor Cooling: Air-cooled design Drive: High frequency motor, with 1:1 direct drive Control: Speed controlled with frequency converter Control: Graphic control C55DD Refrigerant dryer: Integrated, refrigerant R513A Filtration: incl. cyclone separator Container: horizontal, painted Performance data: Volume flow at operating pressure 7.0 bar = 0.26-2.26 m³/min Operating pressure min. / max. 5.0 / 12.5 bar Total power consumption at 10.0 bar / full load 16.2 kW Rated power motor 15 kW Oil quantity 5.2 lt Dimensions and weight: L x W x H = 1655 x 655 x 1550 mm weight 400 kg Compressed air outlet G 3/4'' Capacity compressed air tank 270 lt

Condition: like new (used), Year of construction: 2016, Cleaning system type W 60 C Machine body, internal pipe system, switch cabinet and washing basket in stainless steel Combination machine - turntable system with removable turning device and small parts basket - Basket diameter turntable wash basket 600 mm - Usable interior height 370 mm - Basket load rotary plate wash basket 100 kg - Usable interior height 530 mm - Dimensions of small parts basket 375 x 220 x 200 mm Mesh size 12 mm - Basket load small parts basket 20 kg Complete stainless steel design Pump(s) and external piping/fittings Version for operation with Liquids with a density of 1.3 due to reinforced pump with frequency converter Chip/particle filter with bath cover plate ECO flushing (loss of sink) for minimum water consumption Water supply from the operator's mains supply with hot water supply on the machine side Hot air drying 1 x 4 KW Oil skimmer Pumping device/floor flushing Kdsdpfxeq Ewgkj Ab Uow with pump and pipe system in stainless steel

Year of construction: 2022, condition: excellent (used), functionality: fully functional, We are selling an Instron tensile and compression testing machine in excellent condition. Instron 34TM-50 benchtop model Config: E1-F1-G1 50KN Year of manufacture: 2022 Weight: 151Kg Load transducer: 50KN 2530-50kN/165541 Load transducer: 5kN 2530-5kN/166885 Last service and calibration August 2024 Next service and calibration August 2026 Ksdpfowz Iktex Ab Uedw The 3400 Series universal testing machines cover a test force range from 500 N to 300 kN. Featuring the patent-pending Instron operator protection architecture, the 3400 Series testing machines are easier to use, smarter, and safer than ever before. The testing systems are suitable for performing tensile, compression, bending, peeling, puncture, friction, shear, and numerous other tests and can be used with a wide range of clamping devices and testing fixtures from our extensive accessories catalog. Total height: 1604mm Maximum vertical test space (daylight test - from base to bottom of crosshead): 1198mm Test type: Tension, compression, and zero-crossover operation Basic control mode: Displacement control Load capacity - kN (lbf): 50 (11240) Maximum speed - mm/min (in/min): 508 (20) Minimum speed - mm/min (in/min): 0.05 (0.002) Maximum force at maximum speed - kN (lbf): 25 (5620) Maximum speed at maximum force - mm/min (in/min): 254 (10) Return speed - mm/min (in/min): 508 (20) Crosshead speed accuracy: ± 0.2% of the set speed at a steady rate and without Load Travel (Crosshead Position) Display Accuracy: In no-load condition, ±0.02 mm (0.0008 in) or ±0.10% of the displayed reading, whichever is greater. Travel (Crosshead Position) Repeatability - mm (in): ±0.015 (0.0006) Load measurement accuracy: ±0.5% of the reading up to 1/200 of the force transducer's rated force. Strain measurement accuracy: ±0.5% of the displayed reading up to 2% of the full scale value, with an ASTM E83 Class B or ISO 9513 Class 0.5 strain transducer.

Condition: used, Year of construction: 2001, operating hours: 9,000 h, functionality: unexamined, CHP in insulated container Plant control cabinet Kodetrfhrjpfx Ab Ujdw CHP control cabinet Gas flare Agitator Emergency cooler Various pipes and small parts System was only in operation for 1 year See photos for condition

Condition: used, Year of construction: 2009, Technical details: basket dimensions: 1160 x 600 x 500 mm heating capacity: 4 kW rated capacity: 16 kW rated current: 400V / 50/60 Hz A heating capacity: 4 kW temperature range: 0 - 60 °C weight of the machine ca.: 0,308 to dimensions L x W x H: 1,5 x 1,0 x 0,95 m Industrial Washing Plant The ultrasonic washing system (bath) is composed of external generator for two inserts. Type MW 2000 GT with 25 kHz sound power 2x2000 Watt with 9 levels adjustable continuous/pulse operation ultrasonic time adjustable Ksdpfsu Nu Iysx Ab Uedw The housing, the insert basket and the cover are made of stainless steel. The washing unit stands on a lower tub. Inner dimensions: L:1160 x W:600 x D:500mm (to drain 410mm) Protection class IP23 *

Condition: new, Year of construction: 2025, General: -Temperature range max. 150°C for OeL (heat transfer fluid) -robust sheet steel housing -device on rollers Hydraulics: -sealless immersion pump -Qmax. 60 l/min. - Pmax. 3,8 bar -Tank and heater made of stainless steel -Heating capacity 9 kW -Tank capacity ~20 liters -fittings made of brass/stainless steel -manual oil filling Kedpeddv Itjfx Ab Uedw -mechanical level control -indirect cooling system (tubular spiral heat exchanger) -cooling capacity ~40.000 kcal/h -manometer -bypass -solenoid valves for cooling Electrical and control system: -Electronic PCB control -Solid State Relay -Safety thermostat -failure monitoring -Connection cable with plug Available in approx. 4 weeks!

Condition: as good as new (ex-display), Year of construction: 2025, Ultrasonic Cleaning System ULTRA200 Platform dimensions: 850 x 450 mm Max. usable height: 400 mm Max. load weight: 100 kg Volume: 380 liters + 55 liters (oil separator) Heating: 2 x 4 kW Made entirely of stainless steel Heat and sound insulated External dimensions approx.: L 1,500 x W 950 x H 1,750 mm Control system: Fatek, HMI: Weintek Electrical power: 10.55 kW Includes: - Automatic pneumatic goods lift Kedov U A Izjpfx Ab Uedw - Surface washing/oil separator for bath maintenance - Ultrasonic immersion transducer with 2-way sound - Power: 2,000 watts eff. / 4,000 watts peak - Multifrequency: 20 kHz / 40 kHz - Manual blow-off gun Demonstration system from the Glogar Technology Center, available immediately

Condition: refurbished (used), Year of construction: 2020, pressure:500 t passage width:1100 mm stroke:600 mm weight of the machine ca.:ca. 22,8 t Table area:1100 x 800 mm Kedpfoffamvjx Ab Uodw ram surface:1100 x 800 mm Daylight Opening:800 mm Hydraulic:300 bar closing speed:60-200 mm/sec pressing speed:0 - 9,5 mm/sec opening speed:28-200 mm/sec Table height above ground level:900 mm height over floor:5100 mm workpiece weight max.:2000 kg workpiece weight top:1000 kg halls height:min. 6500 mm Number of pressing cylinders:1 St. number of driving cylinders:2 St. :ca. 270 Lt./min. Oil Tank Capacity:600 l main drive:75 kW Control technology from Siemens:S 7 Safety control:PILZ Multi

Condition: excellent (used), Year of construction: 1988, manufacturer: LÖDIGE year of construction: 1988 type: FKM 4200 D e-engine: 75 kW Siemens Kdsdperywvdofx Ab Ujw

Year of construction: 2012, condition: excellent (used), Nozzle pipe system/s three-dimensional basket diameter 600 mm Basket load 100 kg Usable inner height 370 mm incl. accessories for CE certification: - Direct drive for the washing basket - weekly timer - water shortage protection - chip/particle filter with bath cover plate - vapour extraction Automatic filling level supplementation: - automatic filling level supplementation Blow-off / drying function: Impulse compressed air blow-off three-dimensional Leach maintenance: Disc oil skimmer - discontinuous oil discharge -. For floating/demulsifying oils Bag filter unit type Sʺ With 2 pieces of pressure gauge on the bag filter housing ʺafterʺ filtration Draining and cleaning of the system (occupational safety): Pump out/flush the bottom of the tank. Hosing/tap valve in aluminum/plastic Option - AM version: AM version for additional manual cleaning (high pressure) of wash ware with complicated geometries or in hard-to-reach places / undercuts, such as long bores, channels, heavily soiled surfaces, e.g. oil carbon removal, without contamination of the operator, by means of: - Cover with viewing window, lighting and gauntlet gloves. - Washing brush device - Hand pistol via pump 3 - 6 bar - Blow-off pistol compressed air - front insulation Kdjdpfx Asidxzdeb Ujw High pressure cleaning AM: High pressure unit for individual cleaning of specific part geometries: Version with 100 bar