Used High Pressure Washer Engine for sale (41,497)

Condition: good (used), Year of construction: 2017, Gasoline-powered high-pressure cleaner with a tubular frame. Extremely robust. Ideal for construction sites where there is no electricity yet. Ppsdek Dz R Topfx Abrew 100% ready for use. High-quality Honda engine. High-pressure hose and spray unit in excellent condition. Shipping within Germany is possible. Transport costs are approximately €110 plus VAT. The device can be inspected and tested on-site at any time. Technical data: Pressure: 150 bar Flow rate: 650 liters/hour Weight: 39.5 kg Further information in the attached data sheet.

Condition: new, Year of construction: 2026, functionality: fully functional, Mobile high-pressure waste container washers Autonomous container unit, independent from the chassis. Specifications: - Hydraulic lifting and lowering, - Washes either two small containers (120–240 L) or one large container (1100 L), - Two washing nozzles, - Programmable washing cycles, - Honda engine or equivalent, - Power generator Low operating costs: - 3.5 t permissible gross vehicle weight for the chassis, - Only a few liters of petrol for an entire working day, - Water recycling system (average 800–1000 liters per day), - Up to 100–150 containers (120–240 L) cleaned per day, - Biodegradable cleaning and disinfecting agents (EU-certified). Versatile applications: - The unit can be removed from the truck bed and used separately (especially important during winter). Additional options: - Cleaning of construction machinery, gardens, parks, playgrounds, kindergartens, schools, offices, traffic signs, facades, parking lots, and much more. - Hot water function. Pedpfxjwmln Ts Abrepw - Power sockets (mobile generator) for your electric tools. - Quick couplings for an additional water tank. More photos and videos available on request.

Condition: new, Year of construction: 2024, operating pressure: 140 bar, total length: 800 mm, total height: 1,700 mm, total width: 1,000 mm, water tank capacity: 95 l, power: 3 kW (4.08 HP), temperature: 45 °C, TurboClean Evo II is a professional high-pressure washer made of stainless steel. The washing process takes place in closed circuit with water with special detergent with max. temperature 45oC. Working pressure is 140 bar, thereby hard to reach places and heavily soiled items of carbon deposits, grease or oil can be thoroughly washed. The flap is equipped with pneumatic drives, to increase the safety and the quality of work the washing machine. It is also equipped with oil skimmer, a brush and an air gun. There are cleaning nozzles installed on the window, which improve visibility and ease of work. It is a perfect solution for workshops and parts remanufacturing. Manufactured in Poland. Pedpjq Ru Amjfx Abrepw

Year of construction: 2020, condition: new, PLC microprocessor control • HMI operator panel • Phases changed manually or automatically - temporarily • Two separate circuits for water and chemistry, closed circuit • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible The control box is made of IP54 technology User manual, Declaration of conformity, 12 months warranty. ROMER pressure washers use metal sheet that provides protection against chemicals. The washer walls protect against splashing, thanks to the closed chemistry loop, the process can be carried out with small amounts of chemistry. Due to the small amount of refrigerant required, it is easy to heat and cheaper to buy, it also allows you to wash large dimensions impossible to wash in bath tubs. Filtration system Thanks to the filtration system, the chemistry works in a closed circuit, 3 filters of different thickness are used, which prevent garbage and grease from entering the circulation. The chemistry is stored in heated stainless steel tanks from where it is fed by a pump under pressure to the lance Washing of dimensions The pressure washer allows washing of large elements, optionally has a rotating platform that allows rotation of the cleaned element, elements can be applied to it with a forklift or crane. High pressure pumps The car wash has two preparation phases, both treatments have separate sets of pipes, pumps, wires and guns to minimize mixing of these agents during phase change. Drains have separate valves that manage the return of funds. The carwash is equipped with a logic controller that controls all components. Pedofz Dvvopfx Abrepw The chemistry is pumped up to 20 bar using a very durable, acid-resistant AISI304 pump with several stages, 3 kW. The rinsing phase uses a high pressure piston pump with ceramic pistons with a capacity of 3kW and provides 160 - 200 bar.

Year of construction: 2020, condition: new, PLC microprocessor control • HMI operator panel • Phases changed manually or automatically - temporarily • Two separate circuits for water and chemistry, closed circuit • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible The control box is made of IP54 technology User manual, Declaration of conformity, 12 months warranty. ROMER pressure washers use metal sheet that provides protection against chemicals. The washer walls protect against splashing, thanks to the closed chemistry loop, the process can be carried out with small amounts of chemistry. Due to the small amount of refrigerant required, it is easy to heat and cheaper to buy, it also allows you to wash large dimensions impossible to wash in bath tubs. Filtration system Thanks to the filtration system, the chemistry works in a closed circuit, 3 filters of different thickness are used, which prevent garbage and grease from entering the circulation. The chemistry is stored in heated stainless steel tanks from where it is fed by a pump under pressure to the lance Washing of dimensions Ppodjfz Ax Sspfx Abrjw The pressure washer allows washing of large elements, optionally has a rotating platform that allows rotation of the cleaned element, elements can be applied to it with a forklift or crane. High pressure pumps The car wash has two preparation phases, both treatments have separate sets of pipes, pumps, wires and guns to minimize mixing of these agents during phase change. Drains have separate valves that manage the return of funds. The carwash is equipped with a logic controller that controls all components. The chemistry is pumped up to 20 bar using a very durable, acid-resistant AISI304 pump with several stages, 3 kW. The rinsing phase uses a high pressure piston pump with ceramic pistons with a capacity of 3kW and provides 160 - 200 bar.

Year of construction: 2020, condition: new, PLC microprocessor control • HMI operator panel • Phases changed manually or automatically - temporarily • Two separate circuits for water and chemistry, closed circuit • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible The control box is made of IP54 technology User manual, Declaration of conformity, 12 months warranty. ROMER pressure washers use metal sheet that provides protection against chemicals. The washer walls protect against splashing, thanks to the closed chemistry loop, the process can be carried out with small amounts of chemistry. Due to the small amount of refrigerant required, it is easy to heat and cheaper to buy, it also allows you to wash large dimensions impossible to wash in bath tubs. Filtration system Thanks to the filtration system, the chemistry works in a closed circuit, 3 filters of different thickness are used, which prevent garbage and grease from entering the circulation. The chemistry is stored in heated stainless steel tanks from where it is fed by a pump under pressure to the lance Washing of dimensions The pressure washer allows washing of large elements, optionally has a rotating platform that allows rotation of the cleaned element, elements can be applied to it with a forklift or crane. High pressure pumps The car wash has two preparation phases, both treatments have separate sets of pipes, pumps, wires and guns to minimize mixing of these agents during phase change. Drains have separate valves that manage the return of funds. The carwash is equipped with a logic controller that controls all components. Podpfeflpmqex Abrspw The chemistry is pumped up to 20 bar using a very durable, acid-resistant AISI304 pump with several stages, 3 kW. The rinsing phase uses a high pressure piston pump with ceramic pistons with a capacity of 3kW and provides 160 - 200 bar.

Year of construction: 2020, condition: new, PLC microprocessor control • HMI operator panel • Phases changed manually or automatically - temporarily • Two separate circuits for water and chemistry, closed circuit • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible The control box is made of IP54 technology User manual, Declaration of conformity, 12 months warranty. Ppsdpfjfzrapjx Abrew ROMER pressure washers use metal sheet that provides protection against chemicals. The washer walls protect against splashing, thanks to the closed chemistry loop, the process can be carried out with small amounts of chemistry. Due to the small amount of refrigerant required, it is easy to heat and cheaper to buy, it also allows you to wash large dimensions impossible to wash in bath tubs. Filtration system Thanks to the filtration system, the chemistry works in a closed circuit, 3 filters of different thickness are used, which prevent garbage and grease from entering the circulation. The chemistry is stored in heated stainless steel tanks from where it is fed by a pump under pressure to the lance Washing of dimensions The pressure washer allows washing of large elements, optionally has a rotating platform that allows rotation of the cleaned element, elements can be applied to it with a forklift or crane. High pressure pumps The car wash has two preparation phases, both treatments have separate sets of pipes, pumps, wires and guns to minimize mixing of these agents during phase change. Drains have separate valves that manage the return of funds. The carwash is equipped with a logic controller that controls all components. The chemistry is pumped up to 20 bar using a very durable, acid-resistant AISI304 pump with several stages, 3 kW. The rinsing phase uses a high pressure piston pump with ceramic pistons with a capacity of 3kW and provides 160 - 200 bar.

Year of construction: 2020, condition: new, PLC microprocessor control • HMI operator panel • Phases changed manually or automatically - temporarily • Two separate circuits for water and chemistry, closed circuit • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible The control box is made of IP54 technology Pedpfjfz A D Nox Abrspw User manual, Declaration of conformity, 12 months warranty. ROMER pressure washers use metal sheet that provides protection against chemicals. The washer walls protect against splashing, thanks to the closed chemistry loop, the process can be carried out with small amounts of chemistry. Due to the small amount of refrigerant required, it is easy to heat and cheaper to buy, it also allows you to wash large dimensions impossible to wash in bath tubs. Filtration system Thanks to the filtration system, the chemistry works in a closed circuit, 3 filters of different thickness are used, which prevent garbage and grease from entering the circulation. The chemistry is stored in heated stainless steel tanks from where it is fed by a pump under pressure to the lance Washing of dimensions The pressure washer allows washing of large elements, optionally has a rotating platform that allows rotation of the cleaned element, elements can be applied to it with a forklift or crane. High pressure pumps The car wash has two preparation phases, both treatments have separate sets of pipes, pumps, wires and guns to minimize mixing of these agents during phase change. Drains have separate valves that manage the return of funds. The carwash is equipped with a logic controller that controls all components. The chemistry is pumped up to 20 bar using a very durable, acid-resistant AISI304 pump with several stages, 3 kW. The rinsing phase uses a high pressure piston pump with ceramic pistons with a capacity of 3kW and provides 160 - 200 bar.

Condition: good (used), axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 10/2023, total length: 14,040 mm, total width: 2,550 mm, tire size: 385/65R22.5, wheelbase: 9,060 mm, Year of construction: 2023, = Additional Options and Accessories = - Lifting axle - Air suspension = Notes = Knapen Walking floor XPNK0C100PD97220 {01} 19-10-2023 2 water tanks high-pressure pump lift axle rear closing mechanism = Further Information = Podpfxezqc Dko Abrepw Axle configuration Tire size: 385/65R22.5 Rear axle 1: Lifting axle; Max. axle load: 9000 kg; Tire tread depth left: 60%; Tire tread depth right: 60% Rear axle 2: Max. axle load: 9000 kg; Tire tread depth left: 60%; Tire tread depth right: 60% Rear axle 3: Max. axle load: 9000 kg; Tire tread depth left: 60%; Tire tread depth right: 60% Weights Unladen weight: 8,050 kg Payload: 33,950 kg GVW: 42,000 kg Maintenance, History, and Condition APK (Technical Inspection): valid until 02.2027 Technical condition: good Optical condition: good Identification License plate: OX-68-BT

Condition: like new (used), 2021, 264 operating hours, like new Podpfxoy Aguae Abropw

Condition: excellent (used), Year of construction: 1990, High pressure fan, dust extraction fan, pressure fan, vacuum fan, high pressure fan VRU 15-100-30H2.8 Condition: Used Drive motor: 3.5 kW p1:1.15kg/m3 Speed: 2880 rpm Volume output: 0.315m³/s Pjdpfxsvlz Are Abrepw Pressure point:62 mbar Connection input: Ø 100mm Connection output: Ø 100mm Dimensions: 1000x600x700 mm Mass: 180 kg Location: from stock 54634 Bitburg - immediately available -

Condition: used, Year of construction: 2012, operating hours: 1,861 h, functionality: fully functional, total length: 4,100 mm, total height: 1,950 mm, total width: 1,930 mm, pressure: 600 bar, empty load weight: 1,320 kg, fuel: diesel, overall weight: 1,800 kg, power: 36.5 kW (49.63 HP), temperature: 55 °C, SDAH industrial machine, high-pressure pump: + Woma + Ecotherm 600 Ppedpfx Abezpycbjrew + First registered: 21.11.2012 + 1,861 operating hours + 4-cylinder Kubota diesel engine, 2400ccm; 48 hp + WOMA high-pressure pump, 600 bar + 2 burners (1 burner disconnected) + 55°C heating temperature + Ball head coupling + Single-axle chassis + Tool box at the front + Storage compartment at the rear + 200l water tank + Foot switch + 2 x cable reel + connection cable + HD hose + Woma gun + 410cm x 193cm x 195cm (l x w x h) + Unladen weight: 1,320 kg; permissible GVW: 1,800 kg + High-pressure cleaner, from first owner Receive all newly listed vehicles by email – subscribe to our NEWSLETTER! Errors and typos possible, subject to prior sale!

Condition: excellent (used), functionality: fully functional, overall weight: 60 kg, total height: 175 mm, jaw width: 200 mm, total length: 615 mm, total width: 200 mm, jaw height: 60 mm, clamping width: 200 mm, clamping range: 435 mm, Equipment: type plate available, Allmatic-NC machine vice, high-pressure clamping device Type LC 200 Jaw width 200 mm Base body type LC 160/200 Base body width 164 mm Ppjdpezfimuofx Abrew Clamping force adjustable, max. 60 kN Level 0: direct Level 1: 15 kN Level 2: 30 kN Level 3: 45 kN Level 4: 60 kN Clamping range a: 0-250 mm Clamping range b: 189 – 435 mm Jaw height 60 mm Base body length 530 mm Overall length 615 mm Base body height 115 mm Weight 60 kg Used, in good condition.

Condition: used, Centrifugal pump, high pressure pump, water pump, multi-stage vertical centrifugal pump, booster pump, booster pump -Manufacturer: KSB, high pressure pump Movichrom - G 9/2 PN16 G2 -Drive: 1.1 kW Ppsdpfxsd Sntbo Abrsw -Speed: 2825 rpm -Max. Delivery rate: 9 m³/h -Max. Delivery head: 22 m -Price: per piece -Number: 1 pieces -Dimensions: 250/210/H555 mm -Weight: 37 kg/piece

Condition: good (used), Year of construction: 2019, Centrifugal pump, water pump, stainless steel pump, food-grade pump, vertical centrifugal pump, multi-stage vertical centrifugal pump -Manufacturer: CNP, Multistage Vertical Centrifugal Pump -Type: CDMF5-7FSWSC Ppodpoylif Ejfx Abrew -Motor: 1.1 kW / 2870 rpm Protection class: IP55 -Flow rate: max. 5 m³/h -Pipe connection inlet/outlet Ø32 mm -Dimensions: 250/240/H670 mm -Weight: 27.5 kg

Condition: used, Centrifugal pump, high pressure pump, water pump, multistage vertical centrifugal pump, booster pump, booster pump -Manufacturer: KSB, Movichrom high pressure pump - G 3/5 PN25 G2 -Drive: 0.75 kW -Speed: 2810 rpm -max. delivery rate: 3 m³/h -max. head: 33 m Pjdpef S Nchjfx Abrspw -Dimensions: 220/250/H580 mm -Weight: 34 kg

Condition: good (used), Centrifugal pump, high pressure pump, water pump, multistage vertical centrifugal pump, booster pump, booster pump -Manufacturer: KSB, inline pump MOVI -V 25/1Drive: 0.55 kW Pjdpfx Aef S Ncpsbrspw -Speed: 2840 rpm -max. delivery rate: m³/h -max. head: 39-24 m -Dimensions: 185/185/H555 mm -Weight: 22 kg

Condition: used, Centrifugal pump, high pressure pump, water pump, multistage vertical centrifugal pump, booster pump, pressure amplifier pump Podpfxet E D N Ro Abropw -Manufacturer: KSB, high pressure pump type Movichrom CN 9/2 PN25 CN1 -Drive: 1.1 kW -Speed: 2900 rpm -max. flow rate: 9 m³/h -max. discharge head: 22 m -Dimensions: 280/250/H540mm -Weight: 43 kg

Condition: good (used), Centrifugal pump, high-pressure pump, water pump, multi-stage vertical centrifugal pump, pressure booster pump, pressure intensifier pump -Manufacturer: Brinkmann, pressure booster pump type FH 45-54-05 -Drive: 3.3 kW -Speed: 2900 rpm -Max. flow rate: 30 l/min Ppedoy Ti E Aspfx Abrew -Max. delivery head: 168 m -Dimensions: 285/220/H1010 mm -Weight: 46 kg

Condition: good (used), Centrifugal pump, high-pressure pump, water pump, multi-stage vertical centrifugal pump -Drive: 0.75 kW 2810 rpm -Max. flow rate: 9.0 m³/h -Max. pressure: 18 mWS Ppsdpfx Abscxq Atjrew -Quantity: 1 available -Dimensions: 380/225/H565 mm -Weight: 36 kg

Condition: good (used), Centrifugal pump, high-pressure pump, water pump, multi-stage vertical centrifugal pump Pjdpfxohn S Sle Abrjpw -Manufacturer: Siemens Hinsch, side channel pump type CEHF 3104 -Motor: AEG 22 kW / 2915 rpm -Dimensions: 1680/800/H990 mm -Weight: 394 kg

Condition: good (used), High-pressure standpipe -Pressure: maximum 30 bar -Predos is a special high-pressure stainless steel standpipe with a burst pressure of 70 bar. Podpfxob A Shpj Abrspw -Pressures of up to 30 bar may be required when clearing blocked drains. -High-pressure gauge -with lid lifter type: Hercules -in the suitcase -Dimensions: 1200/360/H200 mm -Weight: 16 kg

Condition: good (used), centrifugal pump, water pump, multi-stage vertical centrifugal pump Ppodpfx Aob A Syuobrsw -Max. flow rate: 5.0 m³/h -Pressure: max. 25 bar -Motor power: 3 kW -Speed: 2840 rpm -Housing and impeller made of: stainless steel -Weight: 45 kg

Condition: good (used), Centrifugal pump, high-pressure pump, water pump, multi-stage vertical centrifugal pump -Drive: 0.37 kW 2900 rpm -Max. flow rate: 2.0 m³/h Ppsdob A Ni Nopfx Abrow -max. H: 14.8 m -Dimensions: 200/210/H420 mm -Weight: 15 kg

Condition: good (used), Centrifugal pump, high-pressure pump, water pump, multi-stage vertical centrifugal pump -Voltage: 380-415 V 690 W -Max. flow rate: 2 m³/h -max. H: 36/46 m -Max. pressure: 6 bar -Maximum temperature: 90 °C -Price: per piece Pedpjd Tk Sqjfx Abrjpw -Quantity: 2 pieces -Dimensions: 400/143/H203 mm -Weight: 12.4 kg