Used Npb 40 for sale (21,994)

Condition: good (used), Year of construction: 2000, functionality: fully functional, travel distance X-axis: 2,200 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, spindle speed (max.): 8,000 rpm, TECHNICAL DETAILS Travel range X-axis: 2,200 mm Travel range Y-axis: 600 mm Travel range Z-axis: 600 mm Number of T-slots: 5 T-slot width: 18 mm T-slot spacing: 125 mm Distance from spindle nose to table: min. 200 mm Tool holder: SK 40 DIN 69871 Pull stud: DIN 69872 Tool clamping force: 12,000 N Inner bearing diameter: 80 mm Spindle speed: max. 8,000 rpm Main spindle motor at 100% duty cycle: 29 kW Dcedpfj Afx Hhjx Ak Aop Main spindle motor (intermittent): 38.5 kW Speed range with constant power from: 1,500 rpm Feed force X, Y and Z axes at 100% duty cycle: 13,000 N Feed force X, Y and Z axes (intermittent): 16,000 N Rapid traverse rate X, Y and Z axes: 30 m/min Working feed rate X, Y and Z axes: max. 10 m/min Milling performance in steel St 60: 650 cm³/min Drilling diameter in steel St 60: 60 mm Threading performance in steel St 60: M36 Tool places: 24 Tool length: max. 300 mm Tool weight: max. 10 kg Tool diameter with full magazine: max. 85 mm Tool diameter with free adjacent positions: max. 125 mm Tool change time: 3.5 s Tool change time chip-to-chip: 7 s MACHINE DETAILS Electrical connection: 55 kW Operating voltage: 400 V / 50 Hz Compressed air connection: 6 bar Coolant pump capacity: 0.75 kW EQUIPMENT Tool magazine with random tool management Coolant pump

Condition: used, Year of construction: 2017, COMPLETE HOOKAH TOBACCO PACKAGING PLANT - TWO LINES + MIXING EQUIPMENT Fixed package: two complete, lightly used hookah (shisha / molasses tobacco) packaging lines with all support equipment, sold together as one lot at one price: - 50g line: up to 120 packs per minute, built 2017, European (mainly Italian) machinery - 250g line: up to 40 packs per minute, built 2018, U.S. and European machinery - Barrel mixing, barrel loading and storage equipment, spare parts and dosing screws Each line runs from bulk tobacco feeding through dosing, flow-pack sealing, check weighing, cartoning and film wrapping. The lines were used from 2017-2018 to 2019 and have been idle since 2020. Location: Gaithersburg, Maryland, USA. Available for inspection by appointment. Reason for sale: the owner stopped plans for U.S. tobacco production because of FDA regulatory requirements. The equipment is not being sold because of any fault. LINE 1 - 50g LINE - UP TO 120 PACKS PER MINUTE (BUILT 2017) 1. Main control cabinet (HMI + PLC) - synchronizes the complete line 2. Manual loading table and feed hopper with twin augers 3. Dosing machine - GB Automazioni (Italy), screw/auger dosing 4. Horizontal flow-pack machine - sealed 50g pouches 5. Inline checkweigher 6. Cartesian robot loader 7. Stepper (indexing) conveyor 8. Case box machine (cartoner) with its own control panel 9. Carpet transfer conveyor 10. Box wrapping machine - film overwrap of each carton 11. Superimpose box unit - carton grouping and stacking 12. Case cross box machine - GB Automazioni (Italy) 13. Overwrapping cross machine - film overwrap of carton bundles 14. Roller exit conveyor LINE 2 - 250g LINE - UP TO 40 PACKS PER MINUTE (BUILT 2018) 1. Material feed hopper 2. Dosing machine - GB Automazioni (Italy) 3. Horizontal flow-pack machine - Delfin 4. Inline checkweigher - Mettler Toledo 5. Stepper conveyor 6. Case box machine (cartoner) 7. Carpet transfer conveyor 8. Box wrapping machine - Barrington Packaging Systems (USA) MIXING AND STORAGE EQUIPMENT (INCLUDED) - 2 barrel mixing / tumbling machines with control panels - Barrel loading machine (lift and tipper) - Blue storage barrels - Stainless steel storage tubs with lids SPARE PARTS (INCLUDED) - Interchangeable dosing screws in several sizes (for setting pack weight) - Spare parts and stainless steel fittings ELECTRICAL AND UTILITIES - 50g line: 220V / 60Hz, 3-phase + PE, approx. 22.5 kW total across 7 supply points (see layout drawing) - 250g line: electrical details available on request - Pneumatic components: compressed air supply required Dcedpfxsz Rtwao Ak Ajp - The equipment has been operated on U.S. 60Hz power DOCUMENTS AVAILABLE - Brochure for each line - 50g line layout drawing with power supply schedule - Additional photos - Videos of the lines running in production and recent walk-arounds PRICE AND TERMS - USD 550,000 for the complete package as described (both lines + mixing and storage equipment + spare parts) - Sold as-is, where-is (EXW Gaithersburg, Maryland) - Buyer arranges rigging, crating and shipping unless otherwise agreed - Inspection welcome: in person, by video call, or by a third-party inspector

Condition: excellent (used), Year of construction: 2020, operating hours: 6,403 h, functionality: fully functional, travel distance X-axis: 3,048 mm, travel distance Y-axis: 813 mm, travel distance Z-axis: 762 mm, nominal power (apparent): 35 kVA, controller model: Haas NGC-Steuerung, total height: 3,300 mm, total length: 7,400 mm, total width: 2,600 mm, table load: 1,814 kg, overall weight: 13,500 kg, spindle speed (max.): 15,000 rpm, spindle motor power: 22 W, number of spindles: 1, number of slots in tool magazine: 51, input voltage: 400 V, type of input current: AC, Equipment: chip conveyor, documentation/manual, HAAS VF-10/40 – CNC Vertical Machining Center – Year of Manufacture 2020 High-performance CNC vertical machining center with a large work area, a 15,000 RPM high-speed spindle, and a side-mounted tool changer with 50+1 magazine positions. The machine features a modern HAAS NGC control system with numerous activated functions, including high-speed machining, macro programming, rigid tapping, and rotation/scaling. Technical Data: • Manufacturer: HAAS • Model: VF-10/40 • Year of Manufacture: 2020 • Control System: HAAS NGC (Next Generation Control) • X-axis Travel: 3,048 mm • Y-axis Travel: 813 mm • Z-axis Travel: 762 mm • Table Size: 3,048 × 711 mm • Maximum Table Load: 1,814 kg • T-slots: 5 × 16 mm • Spindle Speed: 15,000 RPM • Spindle Power: 22.4 kW • Tool Holder: BT40 • Tool Magazine: 50+1 positions • Tool Changer: Side-mounted tool changer • Coolant Tank: 360 liters • Through-spindle coolant (TSC): Activated via control system • Power Supply: 400 V / 50 Hz / 3 phases • Machine Weight: approx. 13,654 kg • Shipping Dimensions (L × W × H): approx. 7,320 × 2,600 × 3,380 mm Control System and Equipment: • HAAS CNC control system with widescreen monitor • High-speed machining • Macro programming • VPS – Visual Programming System • Rotation and scaling • Rigid tapping • M19 spindle orientation • Fourth axis activated via control system • Coolant supply through the spindle activated via control system • Extended program memory: 1 GB • Correction tables • Media display Dedj Ahyvyspfx Ak Aecp Operating Hours (as of October 30, 2026): • Power-on hours: 15,717 h • Cycle start hours: 6,403 h • Feed hours: 3,735 h • Tool changes: 127,433 • Spindle hours: Not listed separately Technical specifications based on available information and control system photos. Model designation and individual equipment features subject to confirmation. Errors, changes, and prior sale are subject to change.

Condition: good (used), functionality: fully functional, Capacity: 40 mm, with a fixed table - Forward and reverse rotation - Infinitely variable speed adjustment: 60 - 1600 rpm Djdpfj Ah Rbyox Ak Ascp - Speed indicator (tachometer) - Threading device - Feed device - Coolant system - Emergency stop

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, Universal lathe – cycle-controlled / Brand: WEILER / Type: E 40 x 1000 Year of manufacture: 2008 A lathe designed for high-performance / highly efficient applications in manufacturing, toolmaking, research institutes, repair work, as well as for training and further education. Operating hours (November 2026): 39.160 h The machine can be inspected under power by prior appointment. TECHNICAL SPECIFICATIONS: - Control system: Siemens SINUMERIK 810D powerline Working range: - Centre-to-centre distance/turning length: 1.000 mm - Swivel diameter over bed: 435 mm - Swivel diameter over cross slide: 200 mm - Maximum travel of cross slide: 260 mm - Bed width: 330 mm - Turning tool cross-section (H x W): 25 x 25 mm Main / turning spindle: - Speed range: 1 – 3.500 rpm - Gear stages: continuously variable - Drive power: 20,5/17 kW - Spindle head to DIN 55027, size 6 - Spindle diameter at front bearing: 110 mm - Spindle bore: 66 mm Dcodps Aic Daefx Ak Aop - Internal taper of the main spindle: metric 70 - Maximum chuck diameter: 200/250 mm - Maximum torque: 450 Nm Feeds: - Feed force (longitudinal/transverse): 8.000/5.000 N - Feed range: 0 – 20 mm/min - Maximum rapid traverse speed: 10/5 m/min Thread cutting: - Metric: 0.1 – 400 mm - Inch: 1/4 – 56 threads per inch - Module: 0,125 – 28 mm Tailstock: - Quill diameter: 65 mm - Quill stroke: 110 mm - Quill taper: MK 4 - Total power rating: 30 kVA - Operating voltage: 400 V, frequency: 50 Hz - Machine weight: 2,7 tons - Space requirements: 2,6 x 2,2 x 1,85 m ACCESSORIES/EQUIPMENT: - 2 mobile chip protective covers - PARAT 4-position quick-change holder - 3-jaw wedge-bar chuck (manual chuck with quick-change jaws), SCHUNK ROTA-S plus 250-62, center hole: 62 mm, spindle mount: Z235 - Documentation - CE marking No guarantee is given as to the completeness or accuracy of the technical specifications or the equipment. - Subject to prior sale.

Condition: refurbished (used), battery capacity: 775 Ah, battery voltage: 80 V, total height: 784 mm, total length: 1,024 mm, total width: 852 mm, Tested forklift battery for your truck - 80V 5PZS 775Ah - DIN A + 1 year warranty + Includes aquamatic watering system + Includes end cell connector & REMA 320 plug (other plugs can be installed on request) + Capacity: min. 90–100% (C5 capacity protocol included upon delivery) + Year of manufacture: 2024 Dimensions: Length 1,024 mm Width 852 mm Height 784 mm Weight: approx. 1,920 kg Suitable for the following models and others: Linde E25-325-00 Linde E25/600-336-00 Linde E25/600 HL-387-00 Linde E25/600 RHL-387-00 Linde E25/600 S -336-00 Linde E25 H-387-00 Linde E25 Hoch-336-00 Linde E25 SH-1276-00 Linde E30-325-00 Linde E30/600-336-00 Linde E30/600-RHL/HL-387-00 Linde E30/600 S-336-00 Linde E30 H-387-00 / Hoch Linde E30P -325-00 Linde E30 SH-1276-00 Linde E35/600H -388-00 Linde E35 H-/HL -387-00 Linde E35 P -337-00 Linde E35 RHL -387-00 Linde E35 SH-1276-00 Linde E40 -337-00 Linde E40 C -388-00 Linde E40 P -337-00 Linde E45/C/600H -388-00 Linde K 5231-00 / side shift Linde P250 -127-00 Linde P250L -127-05 Still R60-30 Still RX60-25/-30/-30L/-35/-40 Crown TSP 6000-C/-D Crown TSP 7000 Jungheinrich EFG 430 Jungheinrich EFG 530 Jungheinrich EFG 535 Jungheinrich EFG 540 Jungheinrich EFG 545 K Jungheinrich EFG 550S Jungheinrich EFG V25 Jungheinrich EKX 516 Toyota 7FBMF30/35 Toyota 8FBMKT20 Toyota 8FBMT25/30 Atlet EH20/25/30 Caterpillar EP30K/FB30/35KPAC Cesab B635A Cesab Blitz350 Clark GEX30 Daewoo B30-32X Daewoo B35X-5 Dodpfey Rnqfox Ak Aocp Hubtex MQ Hyundai 30BHA-7 Magaziner EK1500/2000 Mitsubishi FB25N Mitsubishi FB30K PAC Mitsubishi FB35K Mitsubishi FB35N Nissan QX30 Steinbock-Boss PE30D TCM FHB25-E1L Yale ERP 30VL Standard battery sizes available on request. Transport possible.

Condition: excellent (used), Year of construction: 2012, operating hours: 6,000 h, functionality: fully functional, machine/vehicle number: 21534, travel distance X-axis: 850 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 500 mm, workpiece weight (max.): 2,000 kg, table width: 700 mm, table length: 1,070 mm, overall weight: 12,500 kg, spindle speed (max.): 18,000 rpm, operating hours of spindle: 5,000 h, spindle motor power: 15,000 W, number of slots in tool magazine: 38, Equipment: chip conveyor, documentation/manual, Very good condition, used for light milling. High-pressure coolant flushing through the center of the tool, 80 bar. HSK63A tool holder. Blum tool breakage detection. iTNC530 control system. Includes two vices and a pneumatic clamping device ITS100/P WT. Dcsdpfxezw Rl Ao Ak Ajp Direct sale to end-users only. W-Technology s.r.o. Polní 8 79201 Bruntál Czech Republic

Condition: used, Year of construction: 2015, functionality: fully functional, type of input current: three-phase, tank capacity: 200 l, input current: 70 A, input frequency: 50 Hz, power: 70 kW (95.17 HP), INDUCTOR IH-40-HNK 40 kW Induction Aluminium Melting / Holding Furnace For sale is an INDUCTOR IH-40-HNK industrial induction melting and holding furnace manufactured in 2015. The system features a modern medium-frequency induction power supply with water-cooled induction coil and insulated stainless-steel melting vessel. Dcedpfx Akszy N Iho Aop The induction coil is mounted underneath the crucible, providing efficient and uniform bottom heating. The furnace is suitable for melting and holding aluminium and aluminium alloys in foundry and industrial production environments. Technical Specifications Manufacturer: INDUCTOR Ltd. Model: IH-40-HNK Year of manufacture: 2015 Power: 40 kW Supply voltage: 3 × 400 V / 50 Hz Rated current: 70 A Water-cooled induction system Insulated stainless-steel melting vessel Approximate vessel capacity: 200 litres Medium-frequency IGBT inverter technology PLC / HMI control system Control cabinet weight: 190 kg Applications Aluminium melting Aluminium holding Foundry operations Metal processing Casting lines The machine is offered complete with the control cabinet and induction power supply.

Condition: good (used), functionality: fully functional, Year of construction: 2004, overall weight: 32,500 kg, empty load weight: 3,800 kg, total length: 12,200 mm, total width: 2,440 mm, total height: 2,600 mm, load capacity: 28,700 kg, door opening width: 2,280 mm, door opening height: 2,260 mm, inner dimension height: 2,350 mm, inner dimension length: 12,000 mm, inner dimension width: 2,330 mm, STANDARD 40 FEET CONTAINER CSC VALID MARCH 24 SEALING IN WORKING CONDITION Dcjdsrk Eqvspfx Ak Aop 2 UNITS AVAILABLE

Condition: good (used), functionality: fully functional, type of input current: three-phase, overall weight: 800 kg, total width: 600 mm, total length: 820 mm, total height: 1,600 mm, input voltage: 400 V, Used Liebert NX 40kVA / 32kW 3-phase UPS battery backup system (tested and includes good batteries) Rated power: 0.8 PF: 40 kVA Output power 32KW Battery Battery type VRLA 40x YUASA NPL24-12 I 12V 24 AH Width mm 600 Depth mm 825 Height mm 1600 Weight (approx.) without battery kg 341 Input Parameters Rectifier Type IGBT-based Vector Controlled PFC (PF Corrected) Input Voltage to Rectifier Vac 380 / 400 / 415 (400V : Nominal) 3-ph, 3-w Input Voltage to Bypass Vac 380 / 400 / 415 (400V : Nominal) 3-ph, 4-w (Ph+N) Permissible Input Voltage Range for Rectifier Vac 305 to 477 Input Frequency Hz 50 or 60 Permissible Input Frequency Range for Rectifier Hz 40 to 70 Input Current THD at nominal voltage % < 3* without any Filter Input Power Factor at nominal voltage ≥ 0.99* without any Filter Flexi Power Walk-In seconds 5 to 30 (selectable) Output Parameters Inverter Type IGBT-based Vector, Repetitive & PI Controlled Output Power kW 24 32 48 64 Output Voltage Vac 380 / 400 / 415 (400V : Nominal) 3-ph, 4-w (Ph+N) Dcedpfx Akst H Irls Aop Output Voltage Regulation % +/- 0.5 (3-phase RMS average) Output Frequency Hz 50 or 60 Output Frequency Regulation % +/- 0.05 Output Voltage THD at nominal voltage % 1% (max) Capability to handle High Crest Factor Load 3 : 1 (compliant with IEC 62040-3) Capability to handle Step Load 0-100 or 100-0 Transient Recovery mseconds < 0.5 (recovery to 95% of the voltage level) 10 (recovery to 99% of the voltage level)

Condition: like new (used), Year of construction: 2009, functionality: fully functional, ASCO APM 40 Automatic Dry Ice Block & Slice Wrapping Machine. For sale: a used ASCO APM 40 automatic wrapping machine, specifically designed for wrapping dry ice blocks and slices. The machine is in fully functional condition. Product-contact parts are made of stainless steel. It features automatic conveyor pitch adjustment, torque-controlled motors, and electronically controlled sealing temperature, displayed on the screen. The control panel includes visual alarms and a self-diagnostic function. Technical specifications: - Manufacturer: ASCO - Model: APM 40 - Year of manufacture: 2009 - Condition: Used, fully functional - Working speed: Up to 25 wraps per minute - Film speed: Up to 25 meters per minute - Maximum wrapping width: 250 mm - Maximum wrapping height: 60 mm - Wrapping lengths: 40–260 mm, 140–580 mm, or 200–800 mm Dcjdpfxjzxggle Ak Asp - Compressed air: 4–5 bar - Standard version: Right-hand operation - Location: Noordwijkerhout, Netherlands Suitable for dry ice producers and suppliers who want to automatically wrap dry ice blocks or slices. Contact us for more information. ASCO APM 40, ASCO APM40, ASCO automatic wrapping machine, ASCO dry ice wrapping machine, dry ice block wrapping machine, dry ice slice wrapping machine, dry ice disc wrapping machine, dry ice packaging machine, dry ice block packaging machine, dry ice slice packaging machine, automatic dry ice wrapper, dry ice block wrapper, dry ice slice wrapper, dry ice packaging equipment, dry ice wrapping equipment, dry ice film wrapping machine, dry ice block packer, dry ice packaging line, industrial dry ice packaging machine, used dry ice wrapping machine, used ASCO wrapping machine, dry ice CO2 block wrapping machine. Cold Jet dry ice machine for sale, dry ice machine for sale, dry ice blasting machine for sale, buy dry ice blasting machine, dry ice blaster for sale, dry ice blasting machine for sale, industrial dry ice blaster for sale, CO2 cleaning machine for sale, Cold Jet Aero 30 for sale, Cold Jet Aero 40FP for sale, Cold Jet Aero 40HP for sale, Cold Jet Aero 75 for sale, Cold Jet Aero 75 DX for sale, Cold Jet Aero75 DX, Cold Jet 75DX, used Cold Jet machine, used dry ice blasting machine, Cold Jet Aero series, Cold Jet i3 MicroClean, Cold Jet E-CO2, Cold Jet SDI Select 60, Cold Jet IceRocket, Cold Jet Elite 20, Cold Jet Dry Icepress, Cold Jet pelletizer, dry ice blaster, dry ice cleaning machine, industrial dry ice cleaning system, pellet dry ice blaster, dry ice blasting equipment, cryogenic cleaning machine, CO2 blasting machine, carbon dioxide blaster, industrial cleaning, machine cleaning, maintenance cleaning, production line cleaning, mold cleaning without disassembly, paint removal dry ice, coating removal dry ice, rust removal, fire and soot damage cleaning, electrical cabinet cleaning, food industry cleaning, automotive cleaning, printing press cleaning, dry ice blaster 20 bar, high-pressure dry ice blaster, non-abrasive cleaning machine, refurbished dry ice machine, 20 ft blasting hose, dry ice blasting gun, venturi nozzle, Kärcher Ice Blaster, Kärcher IB 7/40, Kärcher IB 15/120, ASCO Jet, Cryoblaster, ICS Dry Ice, Nozzitec, Triventek, Cryonomic, Südstrahl, White Lion dry ice blaster, ICEsonic dry ice blaster, dry ice blasting machine Netherlands, dry ice machine Noordwijkerhout, industrial cleaning equipment Europe, export dry ice machine, DrDryice.

Condition: used, Year of construction: 2019, operating hours: 9,327 h, functionality: fully functional, machine/vehicle number: Roboter: 4600-108236 / Steuerung: 4600-108236, overall weight: 654 kg, load capacity: 40 kg, arm reach: 2,550 mm, ABB industrial robot with IRB 4600-40/2.55 Type C manipulator and IRC5 Single controller for industrial automation applications. Condition is used and tested. Typical applications include handling, assembly, machining, and general automation. The payload is 40 kg with a reach of 2550 mm. It was manufactured in 2019 and has 9327 operating hours. The software version is RobotWare 6.08.00.01. It is equipped with an ABB FlexPendant programming device, a cable set, and the software options Multitasking and HomePosRunning. Dcsdezak E Nspfx Ak Ajp

Condition: used, Year of construction: 2010, We offer this used Flow Mach 4 4020b Dynamic XD waterjet cutting system, manufactured in 2010. Manufacturer: Flow Model: Mach 4 4020b Dynamic XD Year of manufacture: 2010 Condition: used Machine type: waterjet cutting system Flow Mach 4 4020b waterjet cutting system | 6,000 bar HyperJet | Dynamic XD | Service 01/2026 Description: For sale is a powerful and recently serviced precision waterjet cutting system from the world market leader FLOW, model Mach 4 4020b. The system is equipped with Flow's high-end technology (6,000 bar instead of the usual 3,800 bar) and features the Dynamic XD cutting head, which automatically compensates for angular errors and enables complex 3D cuts as well as bevel cuts. A special highlight for buyers: In January 2026, a comprehensive technical service was carried out by the manufacturer (Flow Europe GmbH). This included the installation of an official drive controller retrofit kit. Since original replacement controllers for this model year are often no longer available, this upgrade provides long-term spare parts security and a modernized electronic control system. A test cut was successfully performed after the conversion. Dedpfjzwpfhex Ak Aecp Technical data: • Manufacturer: Flow International Corporation • Model: Mach 4 4020b • Year of manufacture: 2010 (Service & electronics upgrade 01/2026) • Working area: approx. 4,000 mm x 2,000 mm • Cutting head: Dynamic XD (5-axis technology with angular error correction) • Abrasive system: Flow Paser 4 • High-pressure pump: Flow HyperJet 100 (94iD) • Max. operating pressure: 6,000 bar (87,000 PSI) • Pump power: 100 hp / 75 kW • Operating hours (pump): approx. 10,409 h • Control software: FlowMaster / FlowCUT 7.0 • Connection values: 400V, 50Hz, 3 phases (120A full load) Condition & Equipment: • Technical condition: Very good, ready for immediate use. • Maintenance history: Current technical service report from the manufacturer is available (January 2026). • Upgrades: New drive controllers (retrofit kit) and refurbished wiring of the C-axis. • Productivity: The 6,000 bar technology enables up to 50% faster cuts compared to standard systems. Scope of delivery: • Waterjet cutting system Flow Mach 4 4020b • High-pressure pump HyperJet 100 • Control terminal incl. software • Technical acceptance report / service report from 01/2026 Location & Inspection: 78549 Spaichingen (Germany) An inspection of the system under power is possible by prior arrangement from September 15, 2026. Sales & Legal notes: The sale is exclusively in the B2B sector (commercial sale) with the exclusion of any liability for defects, guarantee and warranty ("sold as is"). Returns, exchanges and renegotiations are excluded. All information, data and descriptions are provided to the best of our knowledge and belief, but without guarantee of completeness, accuracy and topicality. The buyer is required to check the technical data, equipment features and the condition of the system on site before the purchase. Dismantling, loading and transport are the sole responsibility of the buyer and at his expense. If you have any questions or require further information, please feel free to send us a message or call us. Waterjet cutter, Waterjet cutting machine, Découpe jet d'eau, Taglio a getto d'acqua, Wycinarka wodna, Rezanie vodným lúčom, 5-axis waterjet, Dynamic XD, Flow HyperJet, 4000x2000, Large format cutting system.

Condition: used, Year of construction: 2007, functionality: fully functional, machine/vehicle number: NV501GG5056, travel distance X-axis: 1,020 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 550 mm, total height: 2,850 mm, total length: 2,800 mm, total width: 2,450 mm, overall weight: 7,300 kg, spindle speed (max.): 14,000 rpm, spindle nose: CAT40, MORI SEIKI NV5000 α1B/40 - Year: 2007 - CNC Vertical Machining Center - Serial Number: NV501GG5056 - CNC Control: Mori Seiki MSX-501 / Fanuc based* - X-Axis Travel: 1,020 mm - Y-Axis Travel: 510 mm - Z-Axis Travel: 510 mm - Table Size: 1,320 × 600 mm - Maximum Table Load: 1,200 kg - Spindle Taper: BT40 Dcjdpfx Ako Ah Dxbo Ajp - Spindle Speed: 14,000 rpm standard* - Automatic Tool Changer: 30 positions standard* - Rapid Traverse X/Y/Z: 42 m/min - Spindle Nose to Table: 150–660 mm - Electrical Supply: 220 V / 60 Hz / 3 Phase - Power Requirement: 48 kVA - Made in Japan - Approx. Machine Weight: 7,300 kg - Approx. Machine Dimensions: 2,823 × 2,450 × 2,850 mm - Equipped with Multi-Position Tool Magazine - Chip Conveyor Included - Coolant System Included Free loading at customer's truck*

Condition: reconditioned (used), Year of construction: 2003, functionality: fully functional, For sale is a refurbished Gillardon pillar drill press. The machine has been completely disassembled and refurbished (including a new spindle bearing). Gillardon GB 40 VE Year of manufacture 2003 Electromagnetic feed 0.1/0.16/0.25 on the joystick at the touch of a button Infinitely variable speeds 2-speed motor Work light Emergency stop button 200mm spindle stroke 350mm throat Table size 630x535mm Clamping surface 400x500mm MT 4 chuck Dcjdpfj Ah Dztsx Ak Aop Keyless chuck 3-16mm Total height 2060mm Weight 500 kg Pickup and inspection in 89558 Böhmenkirch possible by arrangement. Shipping for an additional charge. Forklift available for loading.

Condition: excellent (used), operating hours: 8,640 h, Maximum height 260 mm Turning length 600 mm Maximum turning diameter over the bed cover 400 mm Maximum turning diameter over the compound slide 225 mm Cross travel 260 mm Longitudinal travel 660 mm Spindle head DIN Size 140 h5 Spindle bore 68 mm Dedpfjz Icuzsx Ak Ajcp Speed range 25 – 4000 rpm Feed range, longitudinal and cross 0.5 – 5000 mm/min Rapid traverse, longitudinal and cross 9 m/min Taper in spindle MK 4 Tailstock quill stroke 100 mm Main drive 22 kW Dimensions L x W x H approx. 3600 x 1720 x 1650 mm Weight 3200 kg Accessories / Special features: • CNC control GILDEMEISTER EPL 2 • Electronic handwheel • RS 232 interface • Manual 3-jaw chuck, diameter 200 mm • 12-station tool turret, manufacturer SAUTER, internal coolant supply, VDI 30, tool holder bore Ø 30 mm, DIN 69880 • Swiveling chip conveyor with coolant system • Electric foot switch for hydraulic 3-jaw chuck and hydraulic tailstock quill • Various tool holders • Lighting Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: good (used), Year of construction: 2008, bore capacity in steel (diameter) 40.0 / 50.0 mm throat 320 mm bore stroke 160 mm turning speeds 70 - 4000 U/min table: 770 x 760 mm T-slots 3x 14 x 112 mm table height 780 mm distance spindle /table 988 / 304 mm bore spindles - Morse Taper 4 Kurzspindel MK feed 0.1-0.2-0.3-0.4 mm/U column diameter 145 mm engine output 1.5 / 2.4 kW weight 315 kg Current new price approx. 20.000 euros Special price upon request Features: - Robust pillar drilling machine * ??Drive: V-belt – VARIO system * Height-adjustable drill head Dedpfx Ake Agw Suj Aocp * Constant table height - Automatic spindle feed * With electromagnetic feed clutch * And electrical control via the feed handle * 4 feed rates: 0.1–0.2–0.3–0.4 mm/rev - Infinitely variable speed adjustment * With digital speed display - Multi-speed (pole-changing) drive motor - Clockwise rotation of the drill spindle - Coolant system with a separate tank - 1x machine vise * Jaw width 150 mm / opening width 160 mm - EMERGENCY STOP button on the front - Operating manual (PDF)

Condition: new, Year of construction: 2026, functionality: fully functional, Equipment: foot remote control, Protec container rotating device, 40-ton load capacity, complete set including foot and hand remote control Component diameter 600 - 4200 mm Dcedpfxjzxxkce Ak Asp Speed continuously variable from 100 - 1000 mm/min. Motor power 3.0 kg Dual drive Drive wheel diameter approx. 350 mm Drive wheel width approx. 160 mm

Condition: used, Year of construction: 1987, functionality: fully functional, Surface grinding machine Manufacturer: Geibel & Hotz, Model: FS 40 Primus Year of manufacture: 1987 Technical data Manufacturer: Geibel & Hotz Model: FS 40 Primus Year of manufacture: 1987 Grinding area (L x W): 400 x 200 mm Table width: 600 mm Djdpo Ahif Tsfx Ak Ajcp Max. workpiece weight: 150 kg Magnetic chuck: 400 x 200 mm Longitudinal travel (X-axis): max. 420 mm Transverse travel (Z-axis): 205 mm Table speed: stepless, hydraulically adjustable Grinding wheel dimensions: Ø 225 x 25 x 51 mm Voltage: 3 x 380 V / 50 Hz Dimensions: approx. 1.50 x 1.30 x 2.20 m Weight: approx. 1,200 kg Equipment - Automatic transverse feed (Z-axis) - Rapid traverse for the vertical axis (Y-axis), combined with fine adjustment via handwheel - Central lubrication - Operating manual All information is provided without warranty. A demonstration under power is possible at any time in our showroom.

Condition: used, Year of construction: 2011, travel -x axis 850 mm travel -y axis 700 mm travel -z axis 500 mm Dcjdpfx As Ah Uabjk Asp control HEIDENHAIN - iTNC 530 turning speeds 10.000 U/min numbers of positions in the tool changer 38 tool taper SK40 5-axis simultaneous machining center | HERMLE - C 40 U equipped with internal coolant supply (80 bar), a 38-tool changer, a swivel axis, and a rotary table (ø 800). Additional equipment: - Swivel axis - rotary table (ø 800) - Blum Tool breakage control / -measurement The machine is in a well-maintained condition and can be inspected at any time under power. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: C 40 | C40 | C-40 | C40U

Condition: used, functionality: fully functional, Year of construction: 1998, operating hours: 35,000 h, machine/vehicle number: H981224, stroke length: 180 mm, throat depth: 410 mm, operating speed: 8 mm/s, reverse speed: 80 mm/s, table height: 960 mm, oil tank capacity: 150 l, overall weight: 13 kg, total length: 4,500 mm, total width: 2,200 mm, total height: 2,900 mm, power: 11 kW (14.96 HP), pressing force: 170 t, clearance between the columns: 3,760 mm, table length: 4,230 mm, table width: 180 mm, Equipment: CE marking, documentation/manual, safety light barrier, This machine can still be inspected in its current operational state at the factory in Northern Germany. Working length: 4100 mm Distance between columns: 3650 mm Pressing force: 170 tons Controlled axes: Y1/Y2; X1/X2; R1/R2; Z1/Z2 Motor-adjustable rear back gauge Overhang: 300 mm Stroke: 200 mm Crowning Working height: 960 mm Motor power: 13 kW Dimensions (length x width x height): approx. 4500 x 2200 x 2900 mm Weight: approx. 14 tons Accessories: Dcsdpfxj Ahfnuo Ak Aep Includes tool cabinet with tools.

Condition: good (used), Year of construction: 2017, Traverses X Y Z: 2134 x 1016 x 762mm, Table 2134 x 914mm, table load 1814 kgs, Dcodpfj Ahww Dex Ak Asp Spindle Speed 8,100 rpm, Spindle taper BT40, Spindle Motor 30Hp, HAAS Control, 24 Station ATC, coolant, low volt light, swarf auger

Condition: used, Year of construction: 2012, controller manufacturer: Siemens, controller model: 840 D, _____ Description: Year of manuf. : 2012 Control : Siemens 840 D Pre-processing Manufacturer:Index Type:A 200 Year of construction:2012 Control system:Siemens 840 D Number of slides:5 pieces Bar feeder:IEMCA Master 880 Chip disposal:Chip conveyor Dsdpfxo Ah Nc Us Ak Ajcp Processing 1 (OP10): Manufacturer:Index Type:MS 40 C Year of construction:2012 Control system:Siemens 840 D Number of spindles:6 pieces Parts handling:Streuli robot Chip disposal:Chip conveyor Coolant supply:IKZ system Processing 2 (OP20): Manufacturer:Index Type:MS 40 C Year of construction:2012 Control system:Siemens 840 D Number of spindles:6 pieces Parts handling:Streuli robot Chip disposal:Chip conveyor Coolant supply:IKZ system Linkage: Robots:Kuka Parts transport:Conveyor belts

Condition: new, Year of construction: 2026, functionality: fully functional, Protec Container Rotating Device, 40-ton load capacity, complete set, new with warranty Includes foot and hand remote control with digital display Component diameter: 600 - 4200 mm Speed, continuously variable: 100 - 1000 mm/min Dual drive motor power: 2 x 1.1 kW Dcsdpez Hvwmjfx Ak Aop Dual drive Drive wheel, PU, diameter 400 mm Drive wheel width approx. 200 mm

Condition: excellent (used), functionality: fully functional, Year of construction: 2017, operating hours: 49,641 h, control type: CNC control, actuation type: hydraulic, controller manufacturer: Bystronic, bending force (max.): 40 t, working width: 60 mm, stroke length: 200 mm, oil tank capacity: 100 l, travel distance X-axis: 300 mm, back gauge speed R-axis: 500 mm/s, back gauge travel distance R-axis: 100 mm, back gauge travel distance Z-axis: 955 mm, Equipment: CE marking, documentation/manual, emergency stop, finger protection, safety light barrier, Used Bystronic Xpert 40ton x 1metre cnc pressbrake for sale Model: Xpert 40/1030 Tonnage 400 kn Bending length 1030 mm Standard stroke [S] 200 mm Open height [D] 515mm Distance between side frames 1060mm Table Width 60mm Max. back gauge range X-axis 500mm X-axis travel 300 mm X-axis speed 1500 mm/s R-axis travel 100 mm R-axis speed 500 mm/s Z-axis travel 955 mm Z-axis speed 2000 mm/s Y-approach speed (up to) 300 mm/s Y-working speed (up to) 25 mm/s Accuracy Y-axis 0.004 mm Oil capacity 100 l Electric supply 7.5 kw Weight 4t Length, approx. [L] 1520 mm Width, approx. [W] 1584 mm Height, approx. [H] 2449 mm 1.1 Xpert 40/1030 1.2 ByVision Bending control with 22 Inch Full HD display and touch technology Dcjdpfx Aksxtf A Ie Asp 1.3 Dynamic drive system (DDS) with Energy Saver 1.4 Automatic tool protection 1.5 Ergo foot switch 1.6 Rear protection sliding door electrically controlled 1.7 User manual (on CD) 1.8 Ambient air temperature 7°C up to 35°C 1.9 Voltage: 400/480 V, 50/60 cycles, 3 Ph (other parameters available on request)