Used Npb 40 for sale (21,701)

Condition: used, maximum load weight: 1,950 kg, overall weight: 2,700 kg, axle configuration: 2 axles, first registration: 02/2026, loading space length: 4,000 mm, loading space width: 2,010 mm, loading space height: 115 mm, total width: 2,540 mm, total height: 640 mm, A26 GW26NGA00003 Duedpsyn Ubqefx Ahnju Passenger Car Transport Trailer, Manufacturer: STEMA, Model: FTAK 27-40-21.2 Gross Weight: 2,700 kg, inertia-braked, WAP901 hand winch, low-loader, hydraulically tiltable. Base frame: Extremely robust and torsion-resistant with crash-tested safety V-drawbar. Tiltable, sturdy frame design with safety locks. All frame components are hot-dip galvanized for corrosion resistance. Running rails: Extra-wide, perforated, non-slip zinc-plated running rails with large elongated holes for securely fastening tie-down straps. The extra-wide rail makes it easy to transport vehicles with different wheelbases. Integrated ramps allow for easy loading and unloading. Side walls: Signal red powder coating (corrosion-proof and scratch-resistant) for enhanced safety. Vehicle not refurbished ...and much more. Errors and prior sale excepted.

Condition: used, maximum load weight: 1,950 kg, overall weight: 2,700 kg, axle configuration: 2 axles, first registration: 02/2026, loading space length: 4,000 mm, loading space width: 2,010 mm, loading space height: 115 mm, total width: 2,540 mm, total height: 500 mm, A25 GW26NG000031 Dusdpfxjyn Ucbo Ahnju Car transport trailer, manufacturer STEMA, type FTAK 27-40-21.2, Gross weight: 2,700 kg, with overrun brake, WAP901 hand winch, low loader, hydraulically tiltable. Main frame: Extremely sturdy and torsion-resistant with crash-tested safety V-drawbar. Tiltable, robust frame construction with safety locks. All frame parts are hot-dip galvanized for corrosion resistance. Running rails: Extra wide, perforated, non-slip running rails made of galvanized sheet with large elongated holes for secure fixing of tie-down straps. The extra-wide track allows easy transport of vehicles with different wheelbases. Integrated drive-on ramps facilitate easy loading and unloading. Side panels: Signal red powder-coated (corrosion-free and scratch-resistant) for enhanced safety. Vehicle not reconditioned ...and much more. Errors and prior sale reserved.

Condition: good (used), Year of construction: 1987, Drying oven, drying cabinet, chamber dryer oven, heating oven, heating chamber, drying oven, drying cabinet, drying and heating cabinet -Manufacturer: GFO, chamber dryer oven type KE-SO -Useful space: 1 m³ / 1000x1000x1000 mm -Heating power: 40 kW -max temperature 350°C -Working temperature: 100 to 300°C -Individual components: see photos -Setup dimensions: 2510/1600/H3760 mm Dsdjryalbjpfx Ahneuu -Transport dimensions: 2510/1600/H2380 mm -Weight: 1500kg

Year of construction: 1979, condition: good (used), Crimping tool, crimping machine, crimping jaws, crimping tool, hydraulic hose crimper, hose crimper -Manufacturer: Aeroquip, Hydraulic hose press type SQM 40 -Pressing pliers: size Ø 14 to 35 mm -Accessories: see photos -Transport dimensions: 635/420/H220 mm Djdpfx Ahezbirkonjuu -Weight: 32.8 kg

Condition: good (used), Short-stroke heavy-duty cylinders, high-pressure hydraulics, compact cylinders, light alloy cylinders, high-pressure cylinders, universal cylinders, hydraulic cylinders, straightening cylinders, hydraulic rams, hydraulic pressure cylinders, lifting cylinders, hydraulic short-stroke cylinders, hydraulic flat cylinders -Manufacturer: VEB Madix, single-acting short-stroke heavy-duty cylinder type SKF 40 -Stroke: 50 mm Dusdjzbiq Hjpfx Ahnju -Lifting capacity: 40 t -Stamp diameter: 100 mm -Dimensions: Ø 145 x 130 mm -Weight: 13.1 kg

Condition: used, maximum load weight: 28,560 kg, overall weight: 38,000 kg, axle configuration: 3 axles, first registration: 02/2023, next inspection (TÜV): 03/2026, loading space length: 12,032 mm, loading space width: 2,352 mm, loading space height: 2,698 mm, loading space volume: 68 m³, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2023, Equipment: ABS, FLIEGL 3-axle container chassis rigid with 40 FT Highcube container First registered in 2023 Total weight (technical) 38,000 kg Empty weight of chassis 3,640 kg Empty weight of HighCube container 5,800 kg SAF axles with large disc brakes, 430 mm 1st axle LIFT AXLE, with starting aid Duodevzk Najpfx Ahneu with vehicle driving stability system Axle load detection Tires 6-fold 385/55 R 22.5 40 FT Highcube container right side wall can be opened as doors (multiple wings), door dimensions L 2,340 x W 2,585 mm Portal doors at the rear Dimensions i.L. (LxWxH) 12,032 x 2,352 x 2,698 mm Volume 68 cbm 25 Euro pallets Accessible with pallet truck and forklift 1-A condition RENT is the new BUYING, also available from us as a full-service rental-----

Condition: used, Demag plasticising unit IU mm - removed from Demag Ergotech system 200-560-320 - removed from running machine - fully functional - displacement: 231 cm³ - injection pressure: 1855 bar - moulded part weight max. PS: 210 g - cylinder E: .01 mm, A: .01 mm   - screw E: 39.55 mm, A: 39.8 mm, RSP 39.92 mm - Ø - 06--DEM-001 - year of manufacture 2005 - also suitable for IU320 and IU610 - nut and coupling must be exchanged Dsdsh Nv Itepfx Ahnsuu manufacturer: Demag Dition: gebraucht

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: 2026, warranty duration: 24 months, input voltage: 400 V, DGUV certified until: 07/2027, total width: 580 mm, total length: 840 mm, total height: 1,380 mm, input frequency: 50 Hz, electrical fuse: 16 A, NEW Planetary Mixer PL 40 Planeto NEW Professional machine with robust technology! For the best results! LED display 10 power levels and timer Mixer with the following attachments: 1 whisk, 1 dough hook, 1 flat beater 1 40-liter stainless steel bowl Manual bowl lift DGUV V3 certified – available only from us Dusdpfxozbzz Ro Ahnsu Connection: 400V, 16A-CEE plug Dimensions: 580 x 840 x 1380 mm, W x D x H New machine & SAB tested 24 months warranty + spare parts service Top quality and price in one machine! Your partner with added service!

Condition: reconditioned (used), functionality: fully functional, LVD 4000 x 200T Press Brake Type PPBL 200/40 Duedpfx Ajwtmi Eehnou Capacity 4000 x 200T Maximum stroke 150 mm Weight 13.5T With mobile blade rack

Condition: new, Year of construction: 2026, functionality: fully functional, warranty duration: 12 months, type of input current: AC, product width (max.): 400 mm, input voltage: 230 V, MINIPACK REPLAY 40 EVO The Minipack Replay 40 EVO is a mobile, manual shrink film packaging machine with hood, ideal for small to medium batch sizes. ▢ Mobile, manual shrink film packaging machine with hood ▢ Output up to 300 units per hour ▢ Usable sealing bar dimensions: 420 × 280 mm Dedpfx Ahjx Tqf Denouu ▢ Max. product dimensions: 400 × 250 × 160 mm ▢ Max. film roll size: Ø 250 × 500 mm ▢ Working table height: 925 mm ▢ Machine dimensions (closed): 1,160 × 700 × 1,120 mm ▢ Machine dimensions (open): 1,160 × 700 × 1,220 mm ▢ Machine weight (net/gross): 90 / 111 kg

Condition: good (used), Year of construction: 2014, functionality: fully functional, input voltage: 400 V, overall weight: 195 kg, electrical fuse: 16 A, input frequency: 50 Hz, empty load weight: 195 kg, Mixing and beating machine Duedpjyw Eawsfx Ahneu Rego model: SM 40 with timer control 1 mixing beater, 1 whisk beater 1 32-liter stainless steel container Connection: 400V, 16A-CEE plug Used machine

Condition: good (used), Year of construction: 1994, Manufacturer FRAMAR – Italy Vertical machining: 0 - 180 mm Cross travel: 0 - 150 mm Longitudinal stroke: 0 - 270 mm Table size: 540 / 110 mm Dedpsyxx A Ijfx Ahnjuu Vertical table travel: 0 - 90 mm Work table tilt: 0 – 45 degrees Milling unit angle adjustment: 0 – 45 degrees Maximum door width: 950 mm Motor power: 1.5 kW Operating speed: 2800 rpm Location: in stock at 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2026, Pneumatic double diaphragm pump Cobra 40 -10 Its unique design allows low pulsation operation Uniform ink flow for perfect spray and highest surface quality Ideal for processing shear and moisture sensitive materials Minimal shear forces - ideal for processing e.g. UV varnishes Ideal for processing small quantities of material and for frequent colour changes Dsdpfx Ahebuqn Hjnouu Scope of delivery: Basic unit on stand, HD double hose 7,5m, upper container 5l Ex, AirCoat gun AC 4600 Professional including red air cap and holder, Air Coat nozzle ACF 3000 11/40 Technical data: Conversion ratio: 40:1 Volume flow per double stroke: 10 cm3 Flow rate at 200 double strokes: 2 l/min max. Operating pressure: 250 bar Weight: 23 kg Location: 54634 Bitburg At a special price - immediately available

Condition: new, Year of construction: 2024, Chopper Knife 40 x 40 concave Knife for Weima, Large ..... For almost all common chippers / shredders Duodjbxu Dhepfx Ahnou From stock Bitburg Subject to prior sale

Condition: excellent (used), functionality: fully functional, Year of construction: 2012, operating hours: 3,296 h, load capacity: 4,000 kg, lifting height: 4,650 mm, free lift: 1,700 mm, fuel type: electric, mast type: triplex, construction height: 2,350 mm, battery capacity: 930 Ah, battery voltage: 80 V, DGUV certified until: 06/2027, fork length: 1,500 mm, Equipment: CE marking, UVV, cabin, full service history, lighting, sideshift, Still RX 60-40 Electric Forklift with the following specifications: - Operating hours: 3,296 - Lifting capacity: 4,000 kg - Lifting height: 4,650 mm - Overall height: 2,350 mm - Year of manufacture: 2012 STILL 4.0-ton electric forklift with semi-cab, battery from 2019, non-marking tyres (new at the rear), triplex mast with full free lift, side shifter, 4th hydraulic valve, four-lever control, road-legal lighting (StVZO compliant), 1,500 mm fork length, and charger included. Dujdpoywd Awjfx Ahneu Price includes service according to STILL manufacturer specifications and valid UVV safety inspection upon sale. The following options are available at additional cost: - Full cab - Other attachments (fork positioner, rotator, etc.) - Different fork length Viewing, demonstrations, and test drives available by prior telephone arrangement. Sale exclusively to businesses. Subject to prior sale, errors, and typing mistakes. We can deliver your new forklift cost-effectively with our own low-loader ramp trailer (transport costs upon request). For further information and offers, please visit our website.

Condition: used, total width: 800 mm, total height: 1,600 mm, total length: 1,200 mm, Empty weight: 500 kg - Documentation available: No Dusdpfx Ajwyktnohnou - CE certificate present: No - Serial number: 4234 - Power [A]: 450 - Power [kVa]: 50 - Transport dimensions: 1200mm x 800mm x 1600mm (l x w x h) - Transport weight [kg]: 500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: ready for operation (used), Year of construction: 1977, machine/vehicle number: 212355, functionality: fully functional, pressing force: 40 t, stroke length: 50 mm, table width: 510 mm, table length: 700 mm, ram adjustment: 80 mm, rotational speed (max.): 400 rpm, No reserve price – guaranteed sale to the highest bidder! Placing a bid obligates you to collect the machine within the specified period between 23.06.2026 and 26.06.2026! TECHNICAL DETAILS Pressing force: 40 t Speed range: 65 – 400 rpm Ram stroke: 8 – 50 mm Maximum ram adjustment: 80 mm Table dimensions: 700 mm x 510 mm Decoiler Model: KEMMERICH V 500 AE Diameter: 1,200 mm Dedpsza Tdbjfx Ahnouu MACHINE DETAILS Drive power: 7.5 kW Dimensions & Weight Dimensions (L x W x H): 4,000 x 1,200 x 2,100 mm Machine weight: 4,000 kg External reference: 60

Condition: good (used), The scope of delivery includes: 01x shelf connector, used ( for lateral fastening to the shelf uprights ) Manufacturer: Jung Heinrich Type: Esmena material color: sendz. galvanized Dedpfxji Enx Ts Ahneuu for shelf distance: approx. 250 mm L - profile: 85 x 40 mm weight: 0,68 kg | pcs.

Condition: good (used), We offer you here a used shelf connector of the manufacturer Jung Heinrich for sale. Technical data of the shelf connector: Manufacturer: Jung Heinrich Type: Esmena for upright profile width: 76.2 mm Included in delivery: Djdpfsd Ttzfjx Ahneuu 01x shelf connector used material colour: green Shelf spacing: approx. 245 mm Profile: approx. 80 x 40 mm Weight/pc: approx. 0.98 kg/pc. 04x hexagon head screws, M8 x 20 04x hexagon nut, M8 04x washers, M8

Condition: as good as new (ex-display), Technical data for the wide span racking traverse: Racking system: SSI Schäfer Type: WR 600 Included in delivery: 01x wide span shelf truss, II. choice Material color: RAL 5010 gentian blue box profile: 60 x 40 x 1.25 mm Type of truss: TR4-240-064-25CEL QV71|71|3 clear width: 2.400 mm 02x safety pins, used execution: compl. galvanized To secure the longitudinal beams against unintentional lifting out General information about the article: This article is offered for pickup only. A desired transport or a shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery with us. Djdpfxshtipps Ahneuu

Condition: good (used), The scope of delivery includes: 16x shelf connectors, used Manufacturer: Nedcon Dodpei Euu Uofx Ahnsuu Type: NS Material color: orange head plate dim.: approx. 140 x 117 mm for a shelf distance of: approx. 500 mm suitable for a frame profile: 120 mm profile dim.: approx. 60 x 40 mm Drill hole diameter: approx. 10 mm Weight: 1,75 kg/ pcs.

Condition: used, Technical data for the shelf panel: Shelving system: Meta Type: Clip Included in delivery: 01x Shelf panel, used Panel designation: MS150-III Material finish: Sendzimir galvanized Dimensions: 1,000 x 600 x 40 mm Weight: 3.93 kg|pc. Max. load per shelf panel: 150 kg with evenly distributed load Your contacts at our company: Dedpfx Aeyk T E Tjhnouu Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information on the item: This item is only available for collection. If transportation or shipping of this item is required, additional costs will apply. These costs can be queried separately with us depending on the delivery location and the scope of delivery.

Condition: good (used), The scope of delivery includes: 1x used grating Material color: hot-dip galvanized Total depth: approx. 1,110 mm (support bar direction) Total width: approx. 1,130 mm (cross bar direction) Support bar: TS30/2.00 Frame height: approx. 30 mm Mesh width: approx. 35 x 40 mm Weight per piece: approx. 22.18 kg Internal designation: GR-125 Note: - The grating may have damage, scratches, dents, and welds. Your contact person in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch Dusdpfxewmb Aas Ahneu General information about the item: This item is available for pickup only. Any additional transport or shipping of this item will incur additional costs, which can be requested separately from us depending on the delivery location and scope of delivery.

Condition: used, Your contact person in our home: Men: Andre Evering Mr: Marcel Brahms Mr: Simon blank specifications to the wide clamping shelf traverse: Manufacturer: Nimar Type: MI 50 Included in the scope of delivery: 01 x wide clamping rack crossbar, used Material color: grey Traverse type: MI 50 Box profile: 80 x 40 mm inside width: 2.600 mm 02 x locking pins, used Construction: fully galvanized To secure the beam against unintentional lifting Our services at a glance: (Prices on request) Duodpfodh Ub Aex Ahneu -Installation, construction our general conditions of erection are to be observed -Shelf testing Shelf inspection according to DIN EN 15635 carried out to comply with the BGR 234 Visual inspection for all shelf systems -Delivery with our own fleet of vehicles (without discharge)

Condition: used, Your contact person in our home: Djdsdl D T Iopfx Ahneuu Mr: André evening Mr: Marcel Brahms Mr: Simon blank Included in the scope of delivery: 01 x shelf connectors, used Material color: white for a Regal distance from: approx. 850 mm Profilabm.: approx. 60 x 40 mm Kopfplattenabm.: approx. 140 x 116 mm 08 x screws M10 x 35 mm 08 x nuts M10 08 x washers M10 Are two consecutive single shelves with shelf connectors to Double shelves connected. Our services at a glance: (Prices on request) -Installation, construction our general conditions of erection are to be observed -Shelf testing Shelf inspection according to DIN EN 15635 carried out to comply with the BGR 234 Visual inspection for all shelf systems -Delivery with our own fleet of vehicles (without discharge)