Used Mvf 44 for sale (3,531)

Condition: used, Year of construction: 2007, Morbidelli / SCM Author X5 44 EVO, manufactured in 2007. 5-axis CNC machining center with a console table and vacuum clamping system. Working area X × Y during milling: 4,400 × 1,780 mm Console depth: 1,500 mm Milling and drilling operations Creds Ahzqaepfx Aktoi Tool magazine and automatic tool changer Separate control panel with screen and handheld device Vacuum pump Machine weight according to the nameplate: approx. 5,000 kg Xilog Plus 1.13.988, as shown in a screenshot from 2023. Expected availability from December 2026. Images from 2023 and April 2026; PC/software photos and video recordings from 2023. Scope of supply and viewing by appointment. Price upon request.

Condition: used, Year of construction: 1978, Liter per hour: 7000 Cedpfx Aks Ahlh Toteri

Condition: used, mileage: 958,238 km, power: 210 kW (285.52 HP), first registration: 12/2008, fuel type: diesel, number of seats: 41, gearing type: automatic, next inspection (TÜV): 02/2027, emission class: euro5, color: white, Equipment: ABS, air conditioning, electronic stability program (ESP), soot filter, In accordance with our "General Terms and Conditions," without any guarantee or warranty, we can offer you the following vehicle, subject to final sale, errors, typos, and prior sale: Mercedes Benz Citaro O530 Ü (41+44+1+2 emergency seats), fully air-conditioned (Vehicle 727) First registration: 05.12.2008 958,238 km Engine: 6,374 ccm 210 kW / 286 hp Bluetec 5 EEV MOT valid until 10/2026, TÜV (technical inspection) valid until 02/2027 Permissible total weight: 19,000 kg, unladen weight: 11,960 kg, payload: 7,040 kg Overall length: 12,000 mm x overall width: 2,550 mm x overall height: 3,100 mm Tires: 275/70R22.5, front approximately 40/60%, rear approximately 40/40% Single door at the front, double door at the rear Driver's cab with door Ramp Fully automatic transmission Microphone 2 x electric and heated mirrors Fully air-conditioned Auxiliary heater + 2nd heater Stop brake 41+44+1+2 emergency seats Emergency exit 12-volt socket Chassis with slight rust 07.02.2024: ECAS height sensor, rear axle, right side, new 03.05.2024: Handbrake valve, new 24.07.2024: Front axle, brake disc + pads, new 13.05.2024: Steering knuckle, front axle, left side, new 24.07.2024: Crankshaft oil seal, transmission side, new 18.09.2024: Upper triangular arm, front axle, right side, new 07.10.2024: Lower triangular arm, front axle, right side, new 08.04.2025: Front axle, left side, 2 x triangular arms + bearings, new 22.04.2025: Pressure regulator/air dryer, new 13.05.2025: Belt tensioner + V-belt, air conditioning, new; air conditioning refilled, actuator, flap, roof, right side, new; wheel brake cylinder, rear axle, right side, new 09.07.2025: 2 x condenser fan, new 05.08.2025: Coolant reservoir, new; 2 x alternator, new 12.05.2026: Front axle, right side, air spring, new; rear axle, right side, shock absorber, new + shock absorber mount, new; Haldex valve, overhauled 03.08.2026: Brake caliper, front axle, left side, new Cjdpfsz H Ecxjx Aktsri Various signs of wear, consistent with age Last inspection on 05.08.2025 at 913,055 km, next inspection at 973,055 km Price: €5,000.00 (net) All information is provided without any guarantee or warranty. Our "General Terms and Conditions" apply. The place of jurisdiction for both parties for disputes up to a value of €10,000 is the District Court of Ludwigslust; for disputes exceeding this value, it is the Regional Court of Schwerin. Errors, typos, and prior sale are reserved.

Condition: used, Year of construction: 2006, - 528345 Safety device - 528110 CNC central lubrication system - 529166 Central extraction system - 529214 24-position tool changer - 528837 Work table with supports Crodpfx Akoz Algfetei - 528716 16x TV vacuum cups, 145x145 mm - 528717 8x TV vacuum cups, 145x50 mm - 528719 6 positioning aids - 528200 2 cross lasers - 528715 Preparation for clamping cylinder - 528600 Clamping cylinder, Morbidelli - 528121 Vacuum pump - 529207 Reinforced inverter - 528487 Drilling head speed controlled via machine inverter - 523025 Dongle for Xilog - 528409 Software preparation for teleservice - 529334 Clearance height 280 mm - 528525 PC control Storage location: Nattheim

Condition: used, machine/vehicle number: 006710, Type of edging: Thin edge, Thick edge, Solid wood, Veneer Gluing System: EVA Hotmelt, Hot Air Premilling Unit: yes Corner Rounding Unit: yes Crsdpfxsqy Em To Aktsi Max feed speed: 11 m/min

Condition: used, Year of construction: 2000, Motor: 7.5 kW Tersa cutterhead, Z = 4 2x sliding rollers in the thicknessing table, height-adjustable Steel feed roller, ribbed Infeed roller before and after the thicknessing table Safety bar Cutterhead speed: 5000 rpm Planing height: 2.8 - 250 mm with digital display Planing width: 630 mm Max. chip removal: 8 mm Dust extraction port: 160 mm Crsdpfx Ake Aay D Retji Weight: approx. 1115 kg Dimensions: 1140 x 1260 x 1200 mm Storage location: Nattheim

Condition: used, mileage: 839,600 km, power: 210 kW (285.52 HP), first registration: 11/2009, fuel type: diesel, gearing type: automatic, emission class: euro5, color: white, brakes: retarder, Equipment: air conditioning, parking heater, * Mercedes-Benz Ciatro O530K * Transmission recently renewed * 30+44 seats Crsdpfx Ajxc Rxysktji * 10.6m length * EVOBUS * LAWO destination display * Wheelchair ramp * Air conditioning * Auxiliary heater * Tachograph * Euro 5 * Subject to prior sale, errors and alterations excepted

Condition: ready for operation (used), bar length: 4,400 mm, overall weight: 900 kg, Bar diameter Ø 5-45 mm Magazine capacity 280 Min. bar changeover time 27 sec. Feed rate 150 mm/sec., adjustable Return speed 950 mm/sec. Csdpfx Akjw Rfkbstori Supply voltage 230/400 Volt Installed power 3 KW Compressed air 6 bar Weight 900 kg

Condition: used, mileage: 1,020,000 km, power: 324 kW (440.52 HP), first registration: 06/2016, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 12/2026, brakes: retarder, gearing type: automatic, emission class: euro6, Year of construction: 2016, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, soot filter, tail-lift, * MAN TGX 26.440 BDF Standard * First registration: 06-2016 * Automatic transmission * Retarder * Drive: 6x2 Ceds Ah N Dmepfx Aktori * Lift axle * 2 bunks * 1,000-liter tank * Palfinger LBW 1,500 kg * Air suspension * More pictures and videos available via WhatsApp * Specifications subject to change without notice; errors and prior sale excepted.

Condition: used, Year of construction: 2011, X-Y working area: 4,422 x 1,753 mm X-Y travel: 4,955 x 1,918 mm Z-axis travel: Z = 400 mm 5-axis MORBIDELLI milling spindle C-axis rotation: 650° B-axis tilt: 290° (-10°) Power: 11 kW at 20,000 rpm, adjustable via inverter Liquid cooling HSK 63F interface Chip conveyor Automatic CNC central lubrication RAPID 24 tool changer (24 tool positions) Drill head extension with 30 + 6 spindles 8 positioning aids 2 cross lasers Vacuum pump 250 m³/h PC control with Windows Office Weight approx. 5,000 kg Storage location: Customer Cedpfx Ajy D Rv Dskteri

Condition: excellent (used), Year of construction: 2015, Extraction unit HURRICAN JSS-3-6-44-800, year of manufacture 2007/2015. Current air volume flow: 87,900 m3/h. Filter area: 796 m2. Maximum surface load: 130 m3/m2/h. Reserve capacity: 15,800 m3/h. Length approx. 8,950 mm + return air. Width: 2,950 mm. Height: 9,720 mm. Dust type: wood chips/dust. Crsdpfx Akev Dfr Ustei

Condition: used, mileage: 1,022,000 km, power: 315 kW (428.28 HP), first registration: 09/2019, fuel type: diesel, overall weight: 41,000 kg, brakes: retarder, color: red, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, Mercedes-Benz Antos 2443 Car Transporter, Kässbohrer Supertrans, Retarder, Euro 6 For inquiries: 1126976 * Condition: very good * Unladen weight: 13,500 kg * Permissible total weight: 23,000 kg * Engine: 315 kW / 430 hp * Displacement: 10,677 cm3 * Euro standard: Euro 6 * Retarder * ABS * ASR * ESP * Differential lock, rear axle * AdBlue, left side * Auxiliary drive * Hydraulics * Distance control cruise control with emergency braking assistant * Lane keeping assist * Air-suspended comfort driver's seat / driver * Seat heating, driver * Manual roof hatch * Light and rain sensors * Electric windows, driver / passenger * Electrically heated and adjustable mirrors * Automatic climate control * Sleeper cab * Auxiliary heater * On-board computer * Multifunction steering wheel * Radio / CD / AUX / USB * Suspension: Air / Air (full air suspension) * Tank, left: 390 L * Tank, right: 330 L * Fog lights * Lift axle Tires: 1st axle: 315 / 60 R 22.5 / 20% air suspension 2nd axle: 245 / 70 R 17.5 / 30% air suspension, lift axle 3rd axle: 295 / 60 R 22.5 / 20% air suspension Codps Ah Uy Nsfx Aktsri Trailer: Car transporter, Kässbohrer APT 012 SuperTrans For inquiries: 1126977 * ABS * Condition: very good * Unladen weight: 8,500 kg * Permissible total weight: 18,000 kg * BPW axles * 2-axle air suspension * Hydraulic operation, right side Tires: 1st axle: 245 / 70 R 17.5, 30% air suspension 2nd axle: 245 / 70 R 17.5, 30% air suspension ----Price: ,- Euro + 19% VAT For further questions, you can reach us at the following telephone numbers: We speak: German, English, French, and...? Typographical errors, errors and prior sale are subject to change.

Condition: used, mileage: 567,000 km, power: 309 kW (420.12 HP), first registration: 10/2007, fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, brakes: retarder, color: white, gearing type: mechanical, loading space length: 5,350 mm, loading space width: 2,450 mm, loading space height: 800 mm, Year of construction: 2007, Equipment: ABS, crane, Renault Kerax 420 DCI Tipper 5,35 m + CRANE + REMOTE CONTROL Accident-FREE IN GOOD CONDITION! ? YEAR OF PRODUCTION: 2007 ? MILAGE: 567 000 km Crodpfx Akszrkm Aetei EQUIPMENT: ? ABS ? C. LOCKING ? EL. WINDOWS ? EL. MIRRORS ? POWER STEERING ? TACHOGRAPH TIPPER: 535 x 245 x 80 cm (L x W x H) CAPACITY: 14 000 kg TOTAL WEIGHT: 32 000 kg WHEELBASE: 175/247/135 cm TIRE SIZE: 13R22,5 SPRING SUSPENSION ON BOTH AXLE CRANE: PALFINGER PK 44 002 + REMOTE CONTROL TEL: KUBA - POLSKI, ENGLISH, DEUTSCH, ITALIANO SEBASTIAN - POLSKI, DEUTSCH, ITALIANO, ????? LASZLO - MAGYAR COSTEL - ROMÂN? (Romana facem toate formalitatile pt export inclusiv nr) RADEK - ????? : 4521

Condition: used, mileage: 436,340 km, power: 206 kW (280.08 HP), first registration: 12/2015, fuel type: diesel, number of seats: 45, gearing type: automatic, next inspection (TÜV): 06/2027, emission class: euro6, color: white, brakes: retarder, Equipment: ABS, electronic stability program (ESP), soot filter, In accordance with our "General Terms and Conditions," without any guarantee or warranty, we can offer you the following vehicle, subject to finalization, errors, typos, and prior sale: MAN Lions City UE A20, 45+44+1 + 2 emergency seats (Vehicle 80) First registration: December 16, 2015 436,340 km Engine: 10,518 ccm 205 kW / 279 hp Euro 6 MOT valid until 12/2026, TÜV (technical inspection) valid until 06/2027 Permissible gross vehicle weight: 19,500 kg, unladen weight: 11,687 kg, payload: 7,813 kg Overall length: 11,980 mm x overall width: 2,500 mm x overall height: 2,985 mm Single door at the front, double door at the rear Driver's cabin with door 45+44+1+2 emergency seats Fold-out ramp Auxiliary heater + 2nd heater Retarder Fully automatic transmission Microwave 2 x electric mirrors + mirror heating 12-volt socket Emergency exit Stop brake Driver's seat ISRI with heating and ventilation Lawo system with ticket machine Tires 275/70R22.5, front approx. 60%, rear approx. 30/40% March 26, 2024: New oil filler tube, December 9, 2024: Upper axle strut on the right rear axle new, left engine mount new, serpentine belt for the alternator new, December 9, 2024: Brake chamber on the right front axle new, brake caliper on the left front axle overhauled, brake caliper on the left rear axle new, December 10, 2024: Pressure relief valve next to the gearbox new, tie rod end new, June 3, 2025: Left engine mount new, December 15, 2025: Left engine mount new. Various signs of wear and tear, commensurate with the age of the vehicle. Codpfxjz E Abie Aktori Good overall condition. Last inspection at 428,444 km on March 3, 2026, next inspection at 498,464 km. Price: € 40,000.00 (net) All information is provided without any guarantee or warranty. Our "General Terms and Conditions" apply. The place of jurisdiction for both parties for disputes up to a value of € 10,000 is the Ludwigslust District Court; for disputes exceeding this value, it is the Schwerin Regional Court. Errors, typos, and prior sale are subject to change.

Condition: good (used), Stephan Cutter, Model 44 Csdpfx Akoz D Dvxstjri 400 V

Condition: used, mileage: 450,175 km, power: 182 kW (247.45 HP), first registration: 12/2017, fuel type: diesel, number of seats: 44, gearing type: automatic, next inspection (TÜV): 07/2027, emission class: euro6, color: white, Year of construction: 2017, Equipment: ABS, air conditioning, 7 UNITS AVAILABLE. Crjdpoz I H Irjfx Aktji

Condition: new, functionality: fully functional, !!! We have two pcs in stock. Price is for one pc only !!! Performance & Measurement • Measurement Principle: Thermal mass flow bypass sensor with a laminar flow element. • Flow Range (10K Sub-code): Configured for low to mid-range capacities, nominal 0.08 to 10 ln/min (up to 15 ln/min max depending on the specific gas calibration). • Accuracy: ±0.5% of Reading plus ±0.1% of Full Scale (standard for dry/clean gases). • Repeatability: < ±0.2% of Reading. • Settling Time: Standard 1 to 2 seconds. • Turndown Ratio: 1:50 in analog mode (digitally extendable up to 1:187.5). Mechanical & Environmental • Ingress Protection: IP65 dust-tight and water-jet proof rugged housing. • Pressure Rating: Up to 64 bar abs (PN64). • Operating Temperature: -10°C to +70°C. • Wetted Materials: Stainless steel 316L or equivalent. • Weight: 1.4 kg. Electrical & Communication Cjdpfxjz Hq Rbe Akteri • Power Supply: +15…24 Vdc (±10%). • Power Consumption: Max 320 mA (approx. 3.5 W typical at 24V). • Analog I/O: 0…5 (10) Vdc or 0 (4)…20 mA. • Digital Interfaces: Standard RS232 with configurable fieldbus options (e.g., PROFIBUS DP, DeviceNet, Modbus RTU, EtherCAT, PROFINET). Model code breakdown: • AGD: Represents the precise hardware configuration configuration, internal control valve size, and basic orifice profile. • 44: Specifies the primary electrical connection setup (typically an 8-pin DIN male connector for power/analog/RS232 plus secondary M12 fieldbus options optimized for IP65 environments). • V: Denotes Viton (FKM) internal elastomer seals and plunger materials. Brand new never used. Please check out our other listings as well.

Condition: used, gearing type: automatic, lifting height: 44,000 mm, Sennebogen 673e Crawler Telescopic Crane Year of manufacture: 2018 Operating hours: 4,093 h Lifting height including boom: 44 m (36 m + 8 m) Lateral reach: 38.5 m Pick & Carry with up to 100% of rated load capacity incl. folding jib tip 8,000 mm (can be mounted without auxiliary equipment) Adjustable undercarriage up to 4,800 mm (transport width: 2,980 mm) Electro-hydraulic emergency power unit Radio remote control Radio Programmable work area limitation Tiltable cab up to 20° Rear and side cameras Diesel heater Fuel transfer pump Air conditioning system Central lubrication system Engine: Cummins B6.7 [168 kW/228 hp] Stage 5 Total weight: 71,500 kg Undercarriage ballast: 8 tons Rear ballast: 17.8 tons Upon request, we will provide you with a leasing or financing offer. Mr. Mihm (Tel. ) will be happy to assist you. Further information can be found on our website. Subject to errors and prior sale! Cab, rental possible = Further information = Year of manufacture: 2018 Operating hours: 4,093 Engine brand: Diesel Lifting capacity: 70,000 kg Crodjzg Abhjpfx Aktji Please contact Tobias Ebert for further information.

Condition: excellent (used), Year of construction: 2001, Complete skid mounted unit with: 1) Infeed trolley/Wagon with 2 stainless steel augers pushing the product into a Positive Rotary piston Pump for ingredients like: Grinded cheese, butter, vegetable fatt, salts etc a cold premixed blend. 2) Steam injection system to heat to 80°C with pump on outlet. 3) 2de heating: 95/140°C This high Ultra high heating module can by by-passed by switching 2 swingbend panels 4) Holding tube 5) Flow diversion valve (no product can pass if temperature not achieved) 6) Flashcreaming module, Vessel of 44ltr combined cooler for rapid cooling and creaming in one. 7) Viscosity measuring system with pump and sensor to check the viscosity. 8) Centrifugal CIP pump 9) Scid mounted with all needed inter connecting piping, sensors and valves. 10) Controls Siemens S5 and operator panel. The UHT System is a compact, skid mounted modular line-process system designed especially for lab or small scale industrial production Cedszdrufjpfx Aktsri

Condition: used, Flat Pile Folding Machine Stahl T52/4-4-SAK66 Falzmaschine - Flat Pile Folding Machine Stahl T52/4-4-SAK66 Year 1988 - Serial-No. 36336-88-148120 Folding Size min. 100 x 150mm Folding Size max. 520 x 820mm Folding Type: 1. Unit 4 Buckles - folding width 500mm 2. Unit 4 Buckles - folding width 500mm Pile height max. 690mm Stream delivery SAK 66 Include Compressor Crsdpfe Af Amlox Aktji Counter - Control PCS 100 Manuals Included Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, Year of construction: 1975, functionality: fully functional, overall weight: 10,000 kg, total length: 2,745 mm, total width: 2,360 mm, total height: 2,700 mm, type of cooling: air, BBC BROWN BOVERI (nowadays ABB) – Pouromat, pouring furnace, type XCQ 44 TECHNICAL DATA - crucible capacity: 4.4t - tilting furnace - inductor 120kW - inductor voltage 380/425V - 2 operating modes: preheating, heating mode 1 - pouring rate: 1-20kg/s - dimensions:  height: approx. 2700mm  length: 2745mm  width: 2360mm - weight: approx. 10,000kg - furnace equipped with a bottom-pour stopper - average inductor lifespan: 12 weeks - average bottom-pour stopper lifespan: 1 week - average crucible lifespan: 4 – 6 months - furnace equipped with an additional device used to modify the liquid metal with ferrosilicon CONSTRUCTION The pouring furnace consists of four basic groups: - First group – longitudinal travel (orbit motor) - Second group – transverse travel, including the bottom-pour stopper - Third group – inductor with a power of 120 kW, voltage 380 V 50Hz, whose main task is to heat the liquid metal. The inductor is constantly air-cooled during operation. - Fourth group – switchboard with a built-in transformer, contactors and control station. POURING PROCESS The pouring process proceeds as follows: DISAMATIC 2032 A displays the molds on the conveyor in the correct position. The correct position means that the open pouring basin in the mold is located in a position compatible with the bottom-pour stopper at the bottom of the crucible. If the desired position is achieved, the operator manually (by means of a lever) lifts the bottom-pour stopper in order to fill the mold, until the liquid metal is visible in the outflow. The speed of pouring the molds can be adjusted depending on the diameter of the ceramic block and the orientation of the bottom-pour stopper towards the ceramic block. CERAMICS The manufacturer, BBC, recommends using a two-layer firebrick lining, where one layer is permanent, but the second is expendable. The permanent lining consists of an insulating layer, which is a lightweight burned stone, and a sillimanite layer. The expendable layer consists of a corundum material, meaning a concrete with a high clay content (94%). Both parts are connected together by means of a special cement. The crucible inductor is located in a lining of Al₂O₃ or MgO and SiO₂, depending on the requirements. The material used to seal the bottom-pour stopper has the quality of chamotte with different clay content. The inductor is assembled to the pouring furnace by means of screws and a sealing compound with the proper plasticity and heat resistance. The entire device consists of three stopper rod sleeves, a bot, and a ceramic block, where the bot and stopper rod sleeves are connected together. The bottom-pour stopper is seated on a threaded bar. The bottom-pour stopper is continuously air-cooled. Recommended air pressure: 6 atm. CERAMICS LIFESPAN 1. crucible: approx. 4 – 6 months 2. inductor: approx. 12 weeks The lifespan of the ceramics depends on many factors. The most important are: production frequency, pouring temperature, cleanliness of the liquid metal, and alloy type. The lifespan of the upper cover and rotating cover is much longer because these parts have no direct contact with the liquid metal. PRICE *44,100 EUR Credpfx Aszfyu Aoktji *disassembly of the furnace, transportation costs, and assembly at the customer's location are paid by the Buyer; the price includes additional equipment: - additional (replaceable) inductors (without induction coil): 2 pcs.

Condition: like new (used), functionality: fully functional, HBS 840-44-E Bark Shredder totally renovated and as good as new Csdpfei E Tkwsx Akteri

Condition: used, Radial Drilling Machine GSP type 44 T 12 Spindle: CM4 Spindle exit: 300 mm Arm travel: 1000 mm Csdpfoz Nxplex Akteri Max height swivel table/spindle nose in height position: 700 mm Max height table/spindle nos ein height position: 1300 mm Swivel table +/- 90 Swivel table dimensions: 1000 x 400 mm Spindle motor: 3,7 kW False table Length 1000 mm x Width 800 mm Auto descent Mechanical locking Lubricant pump Spindle rotation left/right Rotation at 360° around the column Voltage: 380 V Length: 2100 mm Width: 1000 mm Total height in height position: 2700 mm Total height in low position: 2400 mm Weight: approx 2,5 T

Condition: excellent (used), Year of construction: 2006, USED HOMAG HPP250R/44/44 PANEL SAW TECHNICAL CHARACTERISTICS. Specifications: Cutting width of (4,400 mm) maximum cutting height (72 mm) of the main saw; 10 HP (7.5 kW) and 3 HP (2.2 kW) scoring motor, 4400 RPM main blade and 5100 RPM scoring blade. saw cart working speed of (80 M/min), return speed of (80 M/min), driven by AC electronically controlled inverter drive; Quick blade release "Power-Lock" system. automatic cut length controlled by optical sensor that detects the blade through the cut Crjdpfxsixz A Es Aktoi Pliers pusher: (7) material grippers, (0-60M/min) forward speed and (0-60M/min) return speed, AC inverter driven, center mounted rack and pinion servo motor; Friction-free contact measurement system, magnetic measurement system. Control and machine operator: Controller software PC with: Homag "CAD MATIC " Operating system + "Windows"; full "REAL TIME" user friendly operating menu; 15" full-color graphics monitor, standard optical mouse and keyboard for data entry; basic on-board "Easy Cut Optimizer" organizes up to (15) pieces of (3) different materials, data loading from a PC from the office is possible, the possibility to link third party optimization software. With complete : (4) air float tables (600 x 1,800 mm), tables are individually selectable with a common 5 HP (4 kW) blower motor HOMAG MODEL HPP250 R 44/44 USEFUL CUT 4,400 X 4,400 MM USEFUL CUTTING HEIGHT 72 MM Nº4 FRONT AIR TABLES Nº 7 PNEUMATIC PLIERS TO FIX BOARDS LOWER PNEUMATIC SIDE LAYER SILENT DRIVE CARRIAGE SYSTEM ACTUATED BY RACK AND PINION ELECTRICAL PANEL WITH AIR CONDITIONING OPTIMIZATION SYSTEM WITH LABELING MACHINE

Year of construction: 2018, condition: used, machine/vehicle number: AT89, Used Tetra Pak helix accumulator 44 meters year 2018 The Used Tetra Pak helix accumulator 44 meters year 2018 efficiently accumulates and manages the production flow in aseptic packaging lines. Notably, Tetra Pak manufactured this model, identified as ACHX10-0400-44, in 2018 to handle brick-type carton containers. Technical and Functional Features To begin with, the Used Tetra Pak helix accumulator 44 meters year 2018 accumulates containers using a helical system that extends 44 meters. Its primary function is to compensate for speed variations between upstream and downstream machines. As a result, it optimizes production flow and prevents plant downtime. Furthermore, the ACHX10-0400-44 model provides high temporary storage capacity and maintains a continuous container flow without compromising structural integrity. Additionally, the helical architecture optimizes available space and reduces footprint compared to other linear accumulation systems. Consequently, thanks to this configuration, the Used Tetra Pak helix accumulator 44 meters year 2018 ensures high operational efficiency with a reduced footprint, making it particularly suitable for lines with complex layouts. Materials and Compatibility Moreover, the accumulator handles brick-type carton containers, ensuring gentle treatment that prevents deformations or damage to the packaging. In addition, the structure uses corrosion-resistant and easily sanitizable materials, thereby complying with food industry regulations. Similarly, the conveyor belts and internal components minimize friction, ensuring smooth container movement. Integration with the Production Line Importantly, the Used Tetra Pak helix accumulator integrates easily into existing packaging lines. This is primarily due to its compatibility with Tetra Pak filling and sealing machines. In particular, the advanced electronic control system synchronizes with production, dynamically adjusting the accumulation and release speed of containers based on operational needs. Consequently, this mechanism optimizes production flow management and significantly reduces the risk of congestion or slowdowns in the line. Crsdpfxsyhbxps Aktoi Operational Advantages By using the Used Tetra Pak helix accumulator manufacturers can significantly improve production efficiency. Specifically, it reduces machine downtime and optimizes overall plant performance. Furthermore, the compact and modular structure simplifies installation and maintenance, thus lowering operational costs. On top of that, Tetra Pak’s high-quality construction ensures system reliability, reinforcing the robustness and durability of its equipment. Conclusion of this Tetra Pak Accumulator All things considered, the Used Tetra Pak helix accumulator provides an advanced solution for managing production flow in aseptic packaging lines. Thanks to its storage capacity, operational efficiency, and compatibility with Tetra Pak systems, this model serves as an ideal option for plants requiring high performance and reliability in handling brick-type carton containers. Ultimately, it represents a reliable and effective investment for streamlining production processes.