Used Si 68 for sale (7,307)

Condition: used, machine/vehicle number: 007676, Position 1: Brushing Machines BARBERAN-ECO-1700-H-SI Position 2: Gluing Machine BARBERAN-ECO-1700-H-SI Position 3: Continuous Cycle Presses BARBERAN-ECO-1700-H-SI Position 4: Continuous Cycle Presses BARBERAN-ECO-1700-H-SI Dodpfewuzzrjx Ap Ioku

Condition: ready for operation (used), Year of construction: 2022, Stitch type: double lockstitch, number of needles: 2, max. stitch length: 12mm, sewing speed: 2500stitches/min, presser foot lift height: 9mm, clearance A/B: 10mm/20mm, needle spacing range: 3mm-30mm, needle system: 134-35. Machine dimensions X/Y/Z: approx. 1100mm/600mm/1700mm, weight: approx. 75kg. On-site inspection is possible. Djdpfx Aeyg Nvgsp Ieku

Condition: excellent (used), functionality: fully functional, SIMPLACUTTER (CAUHE) IV – 1680x1160 Machine lightly used, in very good condition, with new upgraded electronics + laser safety guard. Equipment: - heated plate - pneumatic clutch and brake - operator control panel - 3 operating modes: single, continuous, time-delayed opening - central lubrication - additional safety covers - maintenance tools - hardened pressure sheet Dkodpfx Aoy Rumyjp Iju

Condition: as good as new (ex-display), Year of construction: 2025, machine/vehicle number: AB00035080, input voltage: 400 V, input current: 35 A, input frequency: 50 Hz, type of input current: three-phase, overall weight: 1,112 kg, Equipment: CE marking, documentation/manual, saw blade guard, SCM Class SI 400ep panel saw with blade guard, CE version, manufactured in 2025. Equipped with a miter fence with 3 LCD screens for positioning the stops, automatic adjustment with 2 axes for the scoring unit, a chassis for miter operations with the CompeX system, and an extended support table for panels with a roller conveyor on the side of the parallel fence. Dksdsz Nggljpfx Ap Iju

Condition: good (used), Year of construction: 1999, machine/vehicle number: 68-410235, functionality: fully functional, year of last overhaul: 2025, Equipment: CE marking, documentation/manual, SCHMIDT HydroPneumatic Press No. 68 including safety control system (KLEINIG Engineering) and machine base frame. For sale is a SCHMIDT HydroPneumatic Press No. 68, manufactured in 1999, which underwent a complete overhaul in 2019 and was last fully inspected in 07/2025 (inspection report available). The press is equipped with a KLEINIG press safety control system KPS-SPS with two-hand operation and emergency stop. The safety control system is EC type-approved. Technical data: Manufacturer: SCHMIDT Press type: HydroPneumatic Press No. 68 Year of manufacture: 1999 Overhaul: 2019 Machine No.: 68-410235 Serial No.: 1-014-99 Pressing force: 62 kN Stroke: 100/12 mm Safety distance: 150 mm Post-travel time: 1 sec. Post-travel distance: 15 mm Cylinder working side: 2967/1998 Cylinder translator: 3723/1999 Safety control system: KLEINIG KPS-SPS Serial No.: KE00633-011 Two-hand safety control system EC type-approved Control cabinet IP54 Display with touch panel Mains connection 85–264 V / 50/60 Hz Programmable digital inputs/outputs Programming port including USB cable and PLC software 2-channel pneumatic control block Dksdpfx Ajz Duhxop Iou Two-hand buttons and emergency stop X1/X2 sockets for connection to SCHMIDT presses Including machine base frame KE 10 heavy_AL: Aluminum profile design Height-adjustable screwed feet Glare-free workstation lamp Compressed air storage tank 5-way 230 V socket strip Height-adjustable footrest Plastic worktop The press is offered complete with the described safety control system and machine base frame. Documents, operating instructions, etc. are all available. Inspection possible by arrangement.

Condition: used, Year of construction: 2018, saw blade diameter: 550 mm, Panel saw Manufacturer: SCM GROUP spa Brand: SCM Type: SI 5 Year of manufacture: 2018 Main saw blade diameter: 550 mm Saw blade swivel angle: 46 degrees Max. saw blade cutting height at 90 degrees: 200 mm Max. saw blade cutting height at 45 degrees: 130 mm Cutting width with parallel fence: 1,500 mm Dkedpfx Asz Iqg Eep Ieu Purchase price (net): €16,000 plus applicable VAT. VAT will be shown separately on our invoice. Note: The equipment text or equipment description is taken from the original purchase invoice and has not been checked for accuracy or completeness. Deviations are possible! Financing possible If desired, we can arrange suitable financing through our company. Please contact us. Subject to change, errors and prior sale. Sale is made without warranty and guarantee, and only to commercial businesses. Inquiries will be processed from Monday to Friday between 8 a.m. and 4 p.m.

Condition: ready for operation (used), Year of construction: 1996, machine/vehicle number: 0-261-03-6806, functionality: fully functional, input voltage: 400 V, input current: 20 A, input frequency: 50 Hz, type of input current: three-phase, workpiece height (max.): 50 mm, edge thickness (max.): 8 mm, height adjustment type: mechanical, feed rate X-axis: 11 m/min, actuation type: pneumatic, total height: 1,610 mm, total length: 4,000 mm, total width: 1,680 mm, overall weight: 1,000 kg, Equipment: documentation/manual, The Brandt edge banding machine has provided excellent service for 30 years in a small business and is now to be passed on to new owners. Dkedpfoz Db N Nox Ap Iju

Condition: used, Year of construction: 2010, operating hours: 11,700 h, Machine 1 – SI-G200MK5: equipped with 2 heads, each with 12 nozzles. Machine 2 – SI-F209: equipped with 1 head, intended for the placement of components such as ICs, BGAs, QFPs, etc. Total operating ca 11,700 hours Djdpfxjz Hxxgo Ap Ieku

Condition: used, PLC control, central module, memory, CPU, central device, positioning module Dedpfx Ash Db Idep Isku -Manufacturer: Siemens, positioning module Simatic S5-100U CPU 102 -Type: 6ES5 266-8MA11 -Quantity: 1 piece available -Dimensions: 100/45/H135 mm -Weight: 0.3 kg

Condition: used, Year of construction: 2022, PANEL SAW WITH TILTING SAW BLADE Linvincibile SI 5 KEY FEATURES SLIDING TABLE: GUARANTEED SUPERIOR CUTTING QUALITY OVER THE LONG TERM TELESCOPIC ARM: AN “UNBEATABLE” SMOOTH MOVEMENT SAW UNIT: FOR A PERFECT CUT Technical Data SI 5 Main saw blade diameter (mm): 550 Cutting capacity with extendable fence - with table 3200 mm - with table 3800 mm 3200x3200 3800x3200 Saw blade tilt (degrees): 46 Max. cutting height at 90° (mm): 200 Max. cutting height at 45° (mm): 130 Saw blade speed (rpm): 2500-3500-5000 Scoring blade speed (rpm): 8500 - Extractor port diameter: - on frame - on blade guard 120 100 Main motor power [S6 -40%] Hz50 kW: 7 Scoring motor power [S6 -40%] Hz50 kW: 0.9 Cutting width at rip fence (mm): 1600 Standard equipment and accessories - Optimizer/Process control app for tablets: SCM Thundercut. The app can be downloaded from the App Store or Play Store for tablets compatible with iPadOS or Android. It can be activated via the QR code supplied with the machine. The app enables: * Management of machine fleet and material/panel storage * Creation and editing of projects, importing projects from main furniture design software (file format "cpout"), importing cutting lists * Optimization of cutting lists by selecting one or more proposals from the optimization software integrated into the app * Correct machine settings for each cut, thanks to the simple and intuitive graphics of the 3D sequencer, guiding the operator step by step * Printing barcode labels to identify the various parts, via Bluetooth connection with compatible label printers. - 10-year warranty on the sliding table guide system - Sliding carriage entirely made of aluminum structure with guidance on crimped, hardened and arc-ground steel rails with large contact area - Max. saw blade diameter* up to 450mm with scoring blade mounted* up to 550mm without scoring blade - eye-S 15" electronic control including: * 15" touchscreen monitor * Direct control of the following working axes with manual, semi-automatic, automatic, and incremental modes: - Height adjustment of the main saw blade - Tilt adjustment of the saw unit - Rip fence adjustment - Height and lateral adjustment of the scorer (the scorer is automatically raised to the set position on activation and lowered on deactivation) * Operator assistance functions for complex cuts * Ability to store up to 1000 programs with associated image * Ability to store up to 1000 different tools with associated image * Cutting process management of preloaded parametric machining programs * Environment for creating and storing new sequenced working programs * Automatic import of working dimensions from Thundercut app * USB port * Ready for network connection - Auxiliary function of the electronic control, including: * Determination of correct fence position on rip fence for format processing with tilted saw blade * Determination of correct fence position on rip fence for angle cuts with mitre fence on the work table with or without tilted saw blade - Pivoting control panel above the table - Scoring unit with independent Dkodpfxsz Hb Nbo Ap Iou

Condition: excellent (used), functionality: fully functional, SIMPLACUTTER (CAUHE) IV – 1680x1160 Machine lightly used, in very good condition, new upgraded electronics + laser protection Equipment: – pneumatic clutch and brake – control panel – new upgraded electronics + laser protection Dedpfxsy Rulve Ap Ijku – 3 operating modes: single, continuous, delayed opening – central lubrication – additional safety guards – operation tools – hardened pressure plate

Condition: as good as new (ex-display), Year of construction: 2023, functionality: fully functional, power: 8 kW (10.88 HP), input voltage: 400 V, input current: 18 A, input frequency: 60 Hz, type of input current: three-phase, cutting height (max.): 140 mm, cutting width (max.): 1,500 mm, saw blade diameter: 400 mm, tilt adjustment saw blade: 45 °, height adjustment type: electric, saw blade bore: 30 mm, actuation type: electric, rotational speed (max.): 3,000 rpm, rotational speed (min.): 5,000 rpm, total length: 7,250 mm, total width: 4,460 mm, total height: 1,770 mm, overall weight: 923 kg, table height: 900 mm, Equipment: documentation/manual, saw blade guard, scorer, • Electronically programmable circular panel saw for professional woodworking, combining the highest precision and user-friendliness. • Sliding table with aluminum roller table and hardened precision guides for consistently accurate cuts. • Flexibility: Manual, semi-automatic, and fully automatic operation possible. • Rip fence carriage with CompeX device, anodized aluminum profile with guide made of hardened, ground, and dovetailed steel guides. • Scoring unit with independent motorization, adjustable from the outside, and stops for easy saw blade positioning. • “SCM Thundercut” optimizer/sequencing control app for tablets. • Electronic 2-axis control: Vertical adjustment and tilting of the saw unit. • Eccentric clamping device. Dodpfozvd T Dex Ap Ijku • Electronic display of the parallel fence position.

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, controller model: Fanuc Series 18-M, spindle speed (max.): 10,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 500 mm Travel range, Y-axis: 500 mm Travel range, Z-axis: 500 mm Rapid traverse rate, X-axis: 30,000 mm/min Rapid traverse rate, Y-axis: 30,000 mm/min Rapid traverse rate, Z-axis: 30,000 mm/min Djdsz Ir Iwspfx Ap Ijku Table length: 650 mm Table width: 500 mm Spindle speed: 10,000 rpm Speed ranges: 2 Spindle interface: ISO 40 Tool positions: 30 Tool selection: Random MACHINE DETAILS Control system: Fanuc Series 18-M Coolant pressure: 20 bar Dimensions & Weight Dimensions (L x W x H): 3,140 x 2,090 x 2,900 mm Weight: 7,000 kg

Condition: ready for operation (used), Year of construction: 1962, functionality: fully functional, type of input current: three-phase, overall weight: 1,500 kg, input voltage: 380 V, Cylindrical roll grinder, VEB Schleifmaschinenwerk Berlin (WMW), type SI 40×70, manufactured in 1962 (factory number 1383/62). The machine is complete, with the original control panel (ON/OFF/STOP), and is in working condition. It can be inspected and tested on-site before purchase. Technical specifications: Type / construction size: SI 40×70 Factory number / year of manufacture: 1383/62 Total weight: 1.5 t Current circuit: SI 40-8DT Wiring diagram: SI 41-002 Djdpfx Aoznu Trjp Ioku Type of current: 3-phase alternating current (3~) Frequency: 50 Hz Operating voltage (input): 380 V Distribution voltage: 220 V Connected power: 2.8 kW Slow-blow fuse: 20 A Manufacturer: WMW / VEB Schleifmaschinenwerk Berlin – a German brand known for its robust, industrial-grade cylindrical grinders from that era. Transportation throughout Europe is available upon agreement. We provide a VAT invoice or receipt.

Year of construction: 2017, condition: used, Professional rotary oven for bakery use, designed for the production of pastries and baked goods. The rotor is an oven with a rear burner and heat exchanger, which allows for a reduction in the overall dimensions of the unit. Balanced hot air, combined with the rotation of the rack and controlled steam injection, ensures consistent and even baking, promoting rise and imparting a full aroma to the product. Perfectly stable baking allows for the production of voluminous and soft bread of any shape and type. Manufacturer: MECH - MASZ Dsdpfjzt Ab Iox Ap Ieku Model: ROTOR 68 Tray size: 60 x 80 cm Baking area: 8.6 m2 Weight: 1450 kg Power supply: oil burner Year of manufacture: 2017

Condition: good (used), Year of construction: 1986, Grinding depth: 500 mm Internal diameter: 20...400 mm Workpiece spindle speed: 40...400 rpm Table speed: 0.1...8 m/min Dkjdez Izgispfx Ap Iju Rapid traverse: 10 m/min Total power consumption: 17 kW Machine weight approx.: 6.5 t Additional information: grindable diameter within the workpiece guard: internal: 20..400 mm; external: 500 mm max. workpiece diameter within the workpiece guard: 500 mm max. grinding depth: 315 mm grindable taper angle: 60° Internal grinding spindle speeds: 2640...16500 rpm Drive power for surface grinding unit: 4 kW Drive power for workpiece motor: 1.5 kW Workpiece spindle speeds: 40...400 rpm Table speed: 0.1...8 m/min Rapid traverse: 10 m/min Table travel: 630 mm max. distance from the workpiece spindle flange to the grinding spindle support: 1250 mm

Condition: good (used), functionality: fully functional, overall weight: 955 kg, type of input current: three-phase, input voltage: 400 V, manual hydraulic sealant applicatior for SILICONE Dsdpfsz Ahtuex Ap Ieku power : 4 Kw

Condition: like new (used), Year of construction: 2022, functionality: fully functional, power: 2.21 kW (3.00 HP), input voltage: 400 V, input current: 19 A, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 140 mm, cutting width (max.): 1,270 mm, saw blade diameter: 400 mm, tilt adjustment saw blade: 45 °, height adjustment type: mechanical, saw blade bore: 30 mm, actuation type: electric, rotational speed (max.): 3,700 rpm, total length: 3,200 mm, total width: 5,155 mm, total height: 1,550 mm, overall weight: 691 kg, table height: 900 mm, Equipment: CE marking, documentation/manual, saw blade guard, Year of manufacture: 2022 9 kW motor Dkedpfxsy Shx Se Ap Isu Scoring unit Panel processing up to 3.2 m length Squaring fence with 2 digital readouts Parallel fence with 1 digital readout Excellent condition

Condition: good (used), Year of construction: 2001, functionality: fully functional, Used BRANDT KD 68 CF Optimat edge banding machine from 2001. The machine is equipped with several processing units for complete edge processing. Among other things, it features pre-milling units, trimming units, radius milling cutters, corner copying devices, and pull knives for radius and surface finishing. Technical data / Equipment Manufacturer: BRANDT Type: KD 68 CF Optimat Year of manufacture: 2001 Machine no.: 0-261-02-8154 Control system: BRANDT NC 9 Feed speed: approx. 11 m/min Edge thickness: up to approx. 40 mm Voltage: 400 V Frequency: 50 Hz Control voltage: 24 V Equipment: Djdozxy Nyepfx Ap Isku BRANDT NC 9 control system Pre-milling Trimming units Radius milling Corner copying Pull knives for radius processing Surface pull knife pneumatically controlled units Roller magazine / edge feeder Workpiece transport via feed chain Dust extraction connections on the processing units Central control via control panel Emergency stop The machine is currently still at the customer's site but would be immediately available! Transport is possible for an extra charge! The machine will be inspected before sale. For used machines with a year of manufacture of 2009 or earlier, the warranty is excluded when sold to commercial customers. Technical data and equipment may vary. Errors, prior sales and changes are subject to change. All information without guarantee.

Condition: good (used), Year of construction: 2011, functionality: fully functional, Make: BWF, type: SI 6/1 AS-N X710, serial no. 1114, control: Siemens, type 840 Dsl, machining diameter 40-400 mm, machining depth 710 mm, workpiece diameter 500-600 mm, max. workpiece length 1,000 mm, WSTK head swiveling -5/+30°, belt filter system, oil mist filter, make Unifil, retrofit 2011. Dkodpfx Apsyfii Ds Isu

Condition: ready for operation (used), Year of construction: 2013, operating hours: 12,486 h, functionality: fully functional, travel distance X-axis: 3,400 mm, travel distance Y-axis: 2,300 mm, travel distance Z-axis: 1,000 mm, spindle speed (max.): 18,000 rpm, controller model: Siemens 840D sl, TECHNICAL DETAILS Travel range X-axis: 3,400 mm Travel range Y-axis: 2,300 mm Travel range Z-axis: 1,000 mm Rapid traverse X-axis: 60 m/min Rapid traverse Y-axis: 60 m/min Rapid traverse Z-axis: 40 m/min Design: C3 swivel head Swivel range C-axis: 200° Swivel range A-axis: 120° Spindle motor power: 24 kW Spindle mounting: HSK 63 A Spindle speed: 18,000 rpm Spindle cooling: Water cooling Design: Disc tool changer Tool magazine positions: 20 Pick-up positions: 1 Tool diameter: up to Ø 500 mm Table length: 2,000 mm Table width: 1,500 mm Table thickness: 30 mm Grid spacing: 100 x 100 mm Maximum load capacity: 2,000 kg Repeatability: approx. 0.012 mm MACHINE DETAILS Dksdpjz Izduefx Ap Ieu CNC control: Siemens 840D sl Spindle operating time: approx. 12,486 hours Power-on hours: approx. 37,297 hours EQUIPMENT 5-axis package: included Advanced Surface: included TCP: included Control panel size: 15 inches Remote maintenance: prepared Workpiece measuring probe: m&h wireless measuring probe Tool measurement: BLUM laser Minimum quantity lubrication: internal and external lubrication Central lubrication: automatic Spray mist extraction: with electrostatic separation Full protective cabin: included Tool changing chamber: separate Technical documentation Operating manual Omlat spare spindle included

Condition: used, machine/vehicle number: 008708, Position 1: Continuous Cycle Presses BIELE-FRAME ASSEMBLY + PRESSING LINE Dkodeztaufspfx Ap Ieu

Condition: good (used), Code: 0322 Brand: SCM Model: L'INVINCIBILE SI 3 - CE Standard Electronic panel saw with controlled axis, tilting blade and scoring unit, for furniture, panels, custom-made furnishings, doors, wooden window frames, kitchens, bathroom furniture, plastics, composite materials and various - CE Standard - Year 2017 Technical data: Carriage made entirely of aluminium with contact sliding system on hardened and ground steel guides Electronic control EASY TOUCH 12: 12-inch flat colour screen - Direct management of the following working axis using manual, manual incremental, semi-automatic and automatic methods: main blade lifting, blade unit tilting, parallel guide movement, scoring blade lifting and translation. Operator assistance with graphics support. Tool database Operator assistance function on electronic control Adjustable wall-mounted control panel Scoring unit with independent motorisation Squaring carriage length 3800 mm Main blade diameter 400 mm Scoring blade diameter 120 mm Blade tilt 0-45 degrees Max cutting height at 90 degrees 140 mm Max cutting height at 45 degrees 97 mm Blade rotation speed rpm 3000/4000/5000 Scoring rotation speed rpm 8500 Main blade motor power Hp 9,5 Scoring blade motor power Hp 1,7 Cutting width at parallel guide 1500 mm Parallel guide programmed with THK sliding Electronic adjustment of the scoring unit Djdpfx Ajytufgsp Ioku Squaring frame with ‘COMPEX’ device for angled cuts with automatic compensation of the stop position. Start/stop buttons integrated into the carriage Eccentric workpiece clamping arm Extension to the work surface Squaring guide with 3 LCD readers for stop positions Full support and Wireless: adjustable frame for angled cuts complete with wireless function Suction mouth diameter: at the base 120 mm - at the suspended guard 100 mm Overall dimensions of assembled machine mm 4200 x 4300 x 1800 h Overall dimensions for transport mm 4200 x 2350 x 1800 h + Pallet mm 1600 x 1000 x 800 h Weight kg 1140

Condition: excellent (used), Table length: 320 cm Cutting height: 9 cm Dsdpfx Apjzykwko Ijku Motor power: 7.5 kW

Condition: used, Year of construction: 1963, overall weight: 1,050 kg, type of input current: three-phase, input voltage: 380 V, power: 2.8 kW (3.81 HP), input frequency: 50 Hz, input current: 7 A, CYLINDRICAL GRINDING MACHINE VEB BWF BERLIN SI 40x70 Model: SI 40X70 Serial number: 1436 Year of manufacture: 1963 Total weight: 1.05 t Circuit arrangement: SI40-60.0 Sp Wiring diagram: SI40-60.0 Lp Type of current: 3-phase AC Frequency: 50 Hz Operating voltage: 380 V Distribution voltage: 220 V Connected power: 2.8 kW Machine rated current: 7 A Rated current (fast): 25 A Dkjdpfozl Sn Ujx Ap Iou Permissible protection (slow): 20 A If you have any questions or require further information, please send a message or contact us by phone.