Condition: good (used), Year of construction: 1999, AXOMATIC OPTIMA 1000 Tube Filling and Sealing Machine (Plastic Tubes) This compact machine has a capacity of up to 70 plastic tubes per minute and is used for filling and sealing tubes. With the appropriate format and pump sets, the machine can be adjusted to handle the following specifications: Tube diameter: 10 - 60 mm Tube length: up to 280 mm Filling volume: 2 - 300 ml The machine is offered with the following format parts: Njdpfx Aaex Rqlfetown Tube holders for plastic tubes Ø 35 mm and 48 mm Manufacturer: Optima Year of manufacture: 1999 Required floor space: approx. 180 x 160 x 240 cm

Condition: used, Year of construction: 2022, operating hours: 100 h, functionality: fully functional, type of input current: three-phase, input current: 30 A, input frequency: 50 Hz, input voltage: 400 V, Fully automatic filling machine from the Boloni brand. ATEX-certified. Suitable for filling 25L containers. Filling by weight using load cells. The machine fills 4 containers simultaneously. Automatic capping and palletizing robot. Nedpfx Aajzx Urijtswn Connection between the various components via conveyor belts (steel). The machine has only been used for a limited number of hours. The machine is available for immediate delivery.

Year of construction: 2012, condition: used, machine/vehicle number: AT105, Used Diversey automatic CIP systemTechnical Specifications & Performance DataThis Clean-In-Place (CIP) system is designed to deliver reliable, repeatable sanitation for beverage production and industrial packaging processes. With three dedicated tanks and fully automatic operation, it streamlines cleaning cycles across process circuits, fillers, pasteurizers, and associated pipelines. The system’s electric heating ensures precise temperature control for effective caustic and rinse phases, supporting consistent hygiene standards on second hand and used bottling line installations.System type: Clean-In-Place (CIP)Year of manufacture: 2012Automation level: Fully automaticHeating method: Electrically heatedPower rating: 15 kWElectrical requirements: 380V / 50 HzNo. of tanks: 3Tank volumes: 2 x 1.0 m³ and 1 x 0.5 m³Total tank capacity: 2.5 m³Application: Beverage production and industrial packaging linesAdvanced Automation & Control SystemsThe fully automatic control architecture enables consistent, programmable cleaning sequences with minimal operator intervention. Electric heating supports stable thermal profiles during detergent and rinse steps, improving repeatability and cleaning efficiency. The system layout is compatible with standard PLC/HMI integration practices used in beverage production facilities, facilitating recipe management, cycle timing, and data logging when connected to a plant control network.Production Line Integration CapabilitiesEngineered for seamless integration, this CIP system connects to fillers, piping manifolds, heat exchangers, tanks, and ancillary process equipment. It supports inline or centralized cleaning concepts and can be deployed as a standalone sanitation module serving multiple circuits via automated valve routing. Format and product changeovers are simplified by recipe-driven cycles, making it suitable for facilities handling diverse SKUs within a used bottling line or broader packaging machinery environment.Machine Condition & Maintenance HistoryWith fully automatic operation and electric heating, this CIP system is configured for dependable day-to-day sanitation. Routine preventive maintenance focuses on pump seals, valves, gaskets, temperature probes, and conductivity/flow instrumentation typically used in CIP applications. The three-tank arrangement supports efficient scheduling of cleaning cycles and straightforward upkeep of wetted parts to maintain long-term performance and hygiene.Operational Performance & VersatilityThe multi-tank configuration supports core CIP steps such as pre-rinse, detergent wash, and final rinse, enabling effective removal of residues and biofilms commonly encountered in beverage production. Electrically heated operation enhances the dissolution and action of cleaning agents, helping achieve target sanitation outcomes across a wide range of processing equipment. The system’s automation improves consistency between cycles, reduces manual handling, and supports quality assurance requirements in second hand and used bot... Nedpj Adyz Refx Aatswn

Condition: used, Year of construction: 2004, operating hours: 33,411 h, machine/vehicle number: M308, Aseptic Carton Filling Monoblock CFA406-32 This used SIG Combibloc aseptic carton filling monoblock is engineered for reliable, high-quality filling of fruit juices and still drinks into SIG COMBIBLOC cartons. Built in 2004 and maintained in professional industrial packaging environments, it offers stable performance at 2.0L format with consistent output suitable for beverage production. With a complete set of auxiliary equipment, it integrates smoothly into a used bottling line or second hand industrial packaging setup seeking aseptic carton filling capability. Nodpfe Adt Rfsx Aatswn Manufactured by SIG Combibloc, the CFA 406 series is known for precise dosing, hygienic design, and dependable operation in high-demand beverage production. This unit is accompanied by a sterile air system and downstream handling including evacuation and buffer tables, conveyors, and a Combiswift cap applicator, making it a compact solution for carton packaging lines. Technical Specifications & Performance Data Manufacturer: SIG Combibloc Model: CFA406-32 Year: 2004 Packaging/carton: SIG COMBIBLOC Container volume: 2.0L Capacity: 5000 pieces/hour Operating hours: 33411 h Products: fruit juices and still drinks Equipment composition: CFA 406 filler (2004); Sterile air system (2004); Evacuation table (2004); Buffer table (2004); Cap applicator/Combiswift (2002); Tray packer (2004); Conveyors (2004) Last service: 12/2019 Shutdown: 06/2020 Advanced Automation & Control Systems Designed for aseptic operation, the line features a sterile air system to maintain controlled, hygienic conditions in the filling zone. The equipment supports stable, repeatable filling performance suitable for 2.0L carton formats with precise handling through integrated tables and conveyors. Quick format handling within the CFA series allows efficient setup aligned with industrial packaging standards. Production Line Integration Capabilities This aseptic carton filler integrates seamlessly with upstream and downstream packaging machinery. The included evacuation table, buffer table, conveyors, and tray packer streamline product flow and accumulation, supporting smooth line balancing. The Combiswift cap applicator enhances closure application on cartons, enabling comprehensive line functionality for beverage production focused on cartons. Machine Condition & Maintenance History The machine underwent its last service in December 2019 and was shut down in June 2020. It is currently dismantled and stored. During removal, certain components were taken off and are now missing: 9 switches, 3 photocells, and 10 sensor cables. Overall, the unit presents as a well-maintained, second hand aseptic filling solution with documented service and clear storage status. Operational Performance & Versatility Optimized for fruit juices and still drinks, this carton filling monoblock supports consistent 2.0L SIG COMBIBLOC packaging. The integrated cap applicator allows closure application suited to carton systems, while the sterile air module supports aseptic standards for sensitive beverage categories. Its throughput of 5000 piec...

Year of construction: 2021, condition: used, machine/vehicle number: AT95, Used Posimat bottle unscrambler - year 2021Technical Specifications & Performance DataThis Bottle Unscrambler POSIFLEX-A-20 is a proven solution for high-efficiency bottle handling at the start of a used bottling line. Manufactured by Posimat, it is engineered to orient and feed empty bottles reliably into downstream industrial packaging equipment, supporting beverage production environments that demand consistent uptime and gentle container treatment.Manufacturer: PosimatModel/Type: POSIFLEX-A-20Manufacturing year: 2021Production speed: up to 100 bpm (bottles per minute)Application: Automatic bottle unscrambling and infeed to conveyorsCompliance: CE marked; designed according to 2006/42/CE (Machinery), 2014/30/CE (EMC), 2014/35/CE (Low Voltage)Container handling: Optimized for bottle feeding in beverage production linesUse case: Ideal for second hand installations and upgrades of existing used bottling line layoutsAdvanced Automation & Control SystemsThe POSIFLEX-A-20 is built for automated operation with coordinated control of the hopper, orienting system, and discharge. Operators benefit from intuitive control interfaces and precise speed regulation to match downstream equipment, improving changeover efficiency and minimizing stops.Integrated control panel for speed and function managementAutomated bottle orientation with high repeatabilitySensor-based jam detection and bottle flow monitoringRecipe-friendly setup for rapid format adjustmentDesigned for continuous-duty operation in industrial packaging environmentsProduction Line Integration CapabilitiesThis unscrambler integrates seamlessly at the head of a beverage production line, feeding containers to air or tabletop conveyors leading to rinsing, filling, capping, and labeling machines. It supports standalone or inline operation and can be configured to accommodate a wide range of bottle sizes.Compatible with standard conveyor interfacesFlexible layout options for compact or extended linesFormat change capability for different bottle heights and diametersSuitable for integration into water, juice, wine, beer, and general beverage production processesMachine Condition & Maintenance HistoryBuilt in 2021, this second hand unit presents a modern design life and is offered in ready-for-operation condition. Its contemporary engineering and CE-compliant construction make it a strong candidate for facilities seeking to expand or modernize their used bottling line with minimal risk and reduced commissioning time.Operational Performance & VersatilityEngineered for stable performance at up to 100 bpm, the POSIFLEX-A-20 provides gentle bottle handling, consistent orientation, and smooth discharge to conveyors. This enhances downstream efficiency by reducing starved or blocked infeed conditions at rinsers, fillers, and labelers, improving overall line OEE.Gentle handling for lightweight bottlesConsistent bottle orient... Nodpe Adt Nusfx Aatewn

Year of construction: 2016, condition: used, machine/vehicle number: AT65, Technical Specifications & Performance Data The PakTech CCA 120 is a compact, high-reliability can holder applicator designed to apply plastic carriers to beverage cans with consistent accuracy. As part of a used bottling line or canning line, this second hand unit brings proven PakTech engineering to industrial packaging environments seeking dependable multipack presentation. Manufacturer: PakTech Model: CCA 120 Year: 2016 Machine type: Can Holder Applicator Nominal speed: up to 120 cans per minute (format and line conditions dependent) Container types: Aluminum beverage cans Formats: Compatible with common PakTech carrier styles and multipack configurations (subject to tooling and kit; verify in manuals) Dimensions: Width 2440 mm, Length 1230 mm, Height 1500 mm Electrical: 220V Njdpfx Ao Adyxcoatewn Safety features: Integrated guarding and protections Documentation: Manuals available Advanced Automation & Control Systems Engineered for continuous, reliable operation in beverage production, the CCA 120 delivers automatic carrier application synchronized with upstream and downstream conveyors. An operator-friendly control interface and robust logic control typical of PakTech systems support straightforward setup, monitoring, and troubleshooting. The 220V electrical configuration simplifies integration into existing packaging halls, while comprehensive safety guarding and interlocks protect operators during operation and changeover. Emergency stop circuitry, safety shields, and clear access points are designed to meet modern industrial packaging practices. The included manuals support parameter configuration, maintenance, and format adjustments. Production Line Integration Capabilities This applicator is ideal for positioning downstream of can rinsing and filling, after seaming/capping and labeling/coding, and before case packing, palletizing, or tray loading. It integrates seamlessly with conveyors and control signals on a used bottling line and is suitable for second hand systems handling a variety of beverage SKUs. Changeovers between carrier formats are supported with appropriate tooling, enabling agile response to production needs for beer, cider, soft drinks, energy drinks, water, juice-based RTDs, and similar products. While optimized for aluminum cans, the applicator complements broader lines that may also process PET and glass containers upstream in filling, labeling, capping, and rinsing stages. Machine Condition & Maintenance History Condition is in storage, with the machine currently disassembled. Safety features are included, and manuals are available to facilitate re-commissioning. Assorted spare parts are noted as available. As with any second hand equipment, inspection and verification of specific format kits, wear parts, and controls are recommended prior to integration into your industrial packaging environment. Operational Performance & Versatility The CCA 120 is designed to apply PakTech-style carriers accurately and gently, promoting product stability and consistent pack appearance. Its compact footprint makes it ...

Condition: used, Year of construction: 2011, machine/vehicle number: M327, Used GANGLOFF filling triblock 23000 BPHTechnical Specifications & Performance DataThis rotary Filling Monoblock CX 6/12 is engineered for high-efficiency beverage production and industrial packaging. Manufactured by Gangloff, it integrates precise filling with reliable capping to support demanding used bottling line and second hand equipment projects without compromising quality. Optimized for PET bottles and still water, the machine combines robust construction with a compact rotary footprint and neck-handling transfer for stable container control at high speeds.Manufacturer: GangloffModel: CX 6/12Year of manufacture: 2011Production speed: up to 23000 bottles/hourFiller configuration: 54 valvesCapper configuration: 13 heads (Zalkin)Current bottle format: 1.5LCompatible container material: PETNeck finish: 29/25Transfer type: Neck-handlingMachine type: RotaryWork direction: CounterclockwiseMaximum bottle height: 340 mmOperating pressure: 6 barControl platform: Schneider PLC and HMIAdvanced Automation & Control SystemsThe monoblock is equipped with Schneider PLC and HMI for stable, intuitive operation and simplified diagnostics. Automated sequences manage filling and capping synchronization, while recipe-based adjustments support quick format transitions. The neck-handling architecture reduces mechanical adjustments when switching bottle heights, enhancing uptime and repeatability. Operator interfaces provide clear status visualization and alarms to maintain consistent beverage production quality.Production Line Integration CapabilitiesDesigned for seamless integration in a complete bottling line, the machine can operate inline with upstream rinsing machines and downstream labeling, inspection, and packaging machinery. The neck-handling conveyor interface ensures gentle container transfer, minimizing scuffs and misalignment. Format flexibility centers on PET bottles with 29/25 necks, with the current setup optimized for 1.5L water. The rotary monoblock layout conserves floor space while delivering continuous, stable throughput for industrial packaging applications.Machine Condition & Maintenance HistoryThe unit is ready for operation and has been overhauled. It is supplied with compatible spare parts and includes a 6-month guarantee. Its current configuration supports immediate deployment in beverage production environments, particularly for still water in PET bottles. The maintained condition and recent service provide a reliable starting point for second hand line upgrades or capacity expansions.Operational Performance & VersatilityThis monoblock is ideal for Water production in PET containers. The 54-valve filler delivers uniform fills at high speeds, while the 13-head Zalkin capper ensures precise torque application and consistent sealing for 29/25 neck finishes. Neck-handling transfer enhances stability across tall form... Nodpfxs Adt Nbo Aatswn

Condition: used, Year of construction: 2016, machine/vehicle number: M296, Used Filling Monoblock ALFATEK Elvira for beer 2000 bph General Characteristics of the Used Filling Monoblock ALFATEK Elvira for beer 2000 bph The Used Filling Monoblock ALFATEK Elvira for beer 2000 bph serves as a filling system specifically designed for bottling beer in glass containers, ideal for artisanal or semi-industrial production lines. Alfatek built the unit in 2016, and the Elvira 3/9/1 model handles a production speed of 2000 bottles per hour in the 33 cl format, while also supporting the 75 cl format. Therefore, it meets the needs of breweries with varying product volumes. Moreover, its configuration allows easy integration into existing lines. In particular, this monoblock suits breweries focused on maintaining product quality. Nodpfx Aj Adt Taoatjwn Mechanical Configuration and Working Direction The machine operates with a clockwise rotation and includes certified safety guards, which ensure compliance with workplace safety regulations. Furthermore, the safety system prevents accidental operator contact with moving parts. Currently, the Used Filling Monoblock ALFATEK Elvira for beer 2000 bph remains offline but fully functional. In addition, all technical manuals are available, and the system has undergone regular maintenance and revision. As a result, the machine retains its mechanical integrity. Thus, it stands ready for immediate use upon installation. Light Pressure Filling System At the core of the Used Filling Monoblock ALFATEK Elvira for beer 2000 bph lies the filler with 9 valves, configured for light pressure filling. Notably, this system is ideal for beer, as it preserves carbonation and minimizes agitation. Consequently, it prevents foaming and ensures a clean fill level. The system ensures precision, consistency, and compatibility with 33 cl and 75 cl glass bottles. Additionally, operators can clean and maintain the valves with ease. In other words, this machine simplifies process control. Therefore, it supports stable and hygienic production. Single-Head Capper for Two Cap Sizes The capping unit, integrated into the monoblock, features a single head for crown caps, compatible with 26 mm and 29 mm diameters. The capper, manufactured by AROL, offers high reliability and synchronizes perfectly with the filling phase. Moreover, its construction ensures durability even under regular use. As such, it guarantees a secure seal for each container. Besides that, the capper minimizes the risk of misalignment. For this reason, many small breweries prefer this model for its simplicity and efficiency. Product Application and Container Type Manufacturers designed the Used Filling Monoblock ALFATEK Elvira for beer 2000 bph specifically for beer bottling in glass containers. The machine does not support plastic or can formats. Because of this, it best suits craft breweries seeking high-quality packaging solutions. The light pressure filling system preserves the beer’s organoleptic properties and maintains its effervescence. In contrast, gravity filling would compromise carbonation. Therefore, this setup remains optimal for delicate products. Furthermore, the glass packaging ensures longer shelf life and consumer appeal. Operational Condition and Spare Parts The monoblock remains in good working condition and is available for functional testing. Even though it is no longer in production, it maintains its full operability. A full set of origi...

Condition: used, Year of construction: 2003, operating hours: 10,000 h, machine/vehicle number: PAL48, Used palettizer KEBER AXO4 700 bph General System Description The Used palettizer KEBER AXO4 700 bph delivers a robotic palletizing solution for high-volume operations in demanding industrial environments. KEBER built this model in 2003. The unit currently operates  under stable and verifiable conditions, with 10,000 recorded hours of use confirming its reliability. Moreover, the machine has shown consistent mechanical performance, which adds value to its operational lifespan. Nwjdpfx Aas Adyvuoton Production Capacity and Format Flexibility The Used palettizer KEBER AXO4 700 bph handles 4 to 6 cycles per minute, achieving an output of approximately 700 bottles per hour. As a result, it fits medium- to high-capacity bottling lines. The machine processes up to 20 container formats, allowing operators to switch between different product types with minimal reconfiguration. Consequently, production teams can meet varying packaging requirements without costly downtime. Robotic Handling System The palletizer uses a neck-gripping clamp system to transfer containers with precision and care. Unlike conventional palletizers, this robotic design eliminates mechanical limitations, improving adaptability across various layout configurations and container types. In addition, its gripping system maintains stability throughout the transfer cycle, reducing potential damage. Therefore, the unit ensures safe and accurate palletizing, even under continuous operation. Safety Features and Technical Documentation KEBER equipped the Used palettizer KEBER AXO4 700 bph with compliant safety protections, ensuring operator safety and adherence to current industrial standards. Importantly, the machine meets the safety requirements for CE-certified environments. The manufacturer also provides a complete set of technical manuals, enabling technicians to install, configure, and maintain the system effectively. Furthermore, these documents facilitate preventive maintenance scheduling and error diagnostics. Production Line Integration The palletizer incorporates a floor-level slip-sheet dispenser and a pallet magazine, both integrated into the frame. Thanks to this configuration, the system requires no elevated structure or platform. The unit supports 1200×800 mm and 1200×1000 mm pallet sizes, allowing users to align it with common European and international logistics platforms. As such, integration into existing layouts becomes straightforward. Automation and Process Control The automation system relies on a Siemens S7-300 PLC, which offers seamless integration into SCADA and HMI environments. Consequently, engineers can control, monitor, and adjust operations from central control systems. The unit operates on 400V / 50Hz and draws 15 kW of electrical power, ensuring compatibility with standard industrial infrastructures. Moreover, the powe...

Condition: used, Year of construction: 2011, machine/vehicle number: M318, Used Mesal Filling triblock 12000 BPH - year 2011Technical Specifications & Performance DataThis is an automatic isobaric filling monoblock engineered for PET bottle handling and optimized for carbonated beverage production. Manufactured by MESAL in 2011, model E30-30-10IA1, it combines rinsing, isobaric filling, and capping in a compact rotary platform suitable for medium-speed beverage production. As a versatile second hand asset for a used bottling line, it provides reliable industrial packaging performance with efficient changeover and robust construction.Manufacturer: MESALModel: E30-30-10IA1Year: 2011Production speed: up to 12,000 bottles/hour (format dependent)Container type: PETBottle format: 0.24L (240 ml)Neck finish: 28 mmFilling technology: Isobaric (for carbonated products)Operating mode: AutomaticElectrical data: 400 V, 60 HzPLC/HMI: Omron controlAdvanced Automation & Control SystemsThe monoblock integrates advanced automation to ensure repeatable filling accuracy and stable carbonation control. The Omron PLC coordinates the rinsing carousel, isobaric filling carousel, and capping turret with synchronized drives. Operator-friendly controls help streamline format changes and reduce setup time.Omron PLC automation for reliable machine coordinationCentralized control of rinse, fill, and cap turretsAutomatic operation with format-dependent parametersIsobaric process control for carbonated beverage handlingInterlocked guards and access doors for safe operationProduction Line Integration CapabilitiesDesigned for seamless integration in a beverage production environment, this monoblock is suitable for embedding into a complete used bottling line or operating as a core station within an industrial packaging system. It can be coupled upstream with depalletizing and air conveyors and downstream with labeling, inspection, packing, and palletizing equipment.Inline integration with conveyors and accumulation systemsCompatible with standard PET handling componentsFlexible for carbonated beverage applicationsOptimized for 0.24L PET; adaptable across similar small-format PETMachine Condition & Maintenance HistoryThis second hand monoblock is presented in ready-for-operation condition, suitable for beverage producers seeking dependable performance. The robust engineering typical of MESAL equipment supports consistent uptime when correctly maintained and commissioned.Ready for operation with standard commissioningIndustrial-grade construction for durabilitySuitable for inclusion in a used bottling line upgradeOperational Performance & VersatilityEngineered for carbonated beverage filling, the isobaric system maintains product CO2 content and fill-level stability. The PET handling components support 28 mm neck finishes, common in CSD applicatio... Njdpj Adt Nzofx Aatown

Year of construction: 2006, condition: used, Complete Automatic PET Edible Oil Bottling and Packaging Line – 8,000 Bottles/Hour Complete fully automatic production and packaging line for filling edible oil into 1.0 L PET bottles, with a production capacity of approximately 8,000 bottles per hour. Our asking price is EUR 520,000 net, ex works Shtip, North Macedonia. The price is negotiable, and we are open to considering reasonable offers. The line covers the complete production and packaging process, from PET preforms to finished automatically palletized products. The complete line includes: SIAPI EAS 50.100/8 – PET stretch blow moulding machine, 8 cavities Bottle air conveyor and conveying system AVE Industries RVM 30/8 – filling and capping monoblock, 30 filling stations and 8 capping stations Nitrogen injection system Bottle conveyor system AVE Industries 8T H/M E1 – automatic labelling machine AVE Industries CP3-20 – automatic shrink wrapping / packaging machine with heat tunnel Conveyor systems AVE Industries PABR-80 – automatic palletizing system Main specifications: Application: Edible oil Nedezmd Uiopfx Aatswn Bottle material: PET Bottle size: 1.0 L Line production capacity: approx. 8,000 bottles/hour Main equipment year of manufacture: 2006 Fully automatic production and packaging line The equipment is offered as a complete integrated production line for PET bottle blowing, edible oil filling, capping, labelling, shrink wrapping and automatic palletizing. The complete line is currently installed, in operation and fully functional. Interested buyers can inspect the line and see it running under actual production conditions by prior arrangement. The line is located in Shtip, North Macedonia. Additional technical documentation, photographs and videos of the equipment are available upon request. The complete line is offered for sale as one unit.

Condition: good (used), Year of construction: 2005, Denius modular container, type 840-k-x T 90 -2 Nedpfx Aao Ad Uxwetewn External dimensions WxLxH 2965x8550x2910 mm Clear internal width 2650 mm Clear internal depth 8240 mm Clear internal height 250 mm Catchment volume 2800 l Permissible load per compartment 1000 kg/m³ Weight approx. 7400 kg Fire-resistant steel door, 2000x2000 mm, on the end face Inside, Bito shelving systems with a load capacity of 135 kg per shelf are installed. Complete with technical documentation and plans.

Condition: new, Year of construction: 1971, machine/vehicle number: M126, Technical Specifications & Performance Data The New Filling / Capping Monoblock 24.6 is engineered for accurate, high-speed oil filling and secure press-on capping in a compact, hygienic frame. Designed for modern industrial packaging environments, it combines weight-based filling precision with consistent closure application to maximize uptime and quality. Rated output: up to 11,000 bottles/hour (application-dependent) Filling system: load cell–controlled, gravity-fed, contactless nozzles; atmospheric operation with weight-based dosing Accuracy: per-valve weigh control; gram-level resolution per liter for consistent net-weight results Filler configuration: 24 filling valves Capper configuration: integrated press-on capper, 6 heads Closure type and size: plastic press-on caps, 28–30 mm Bottle formats: 0.06 L, 0.375 L, 0.50 L, 0.75 L Container material: PET (primary compatibility) Products: oils and oil-based liquids appropriate for gravity/weight filling Condition: NEW Documentation: operating and maintenance manuals included Safety: integrated guards and protections Advanced Automation & Control Systems Nedo Adyw Sspfx Aatewn Each filling station uses an individual load cell to measure and control product dose in real time. The system runs at atmospheric pressure with contactless nozzles to reduce cross-contamination risks and mechanical wear. Typical features include recipe selection for bottle formats and targets, automatic tare, drift compensation, and out-of-tolerance detection with reject signaling. A modern control panel with clear operator interface supports production counters, alarms, and changeover guidance. The electrical cabinet is designed for industrial duty and can be configured to common plant standards; integration with line controls and upstream/downstream interlocks is supported. Safety features include interlocked access doors, emergency stops, and jam diagnostics. Production Line Integration Capabilities This monoblock integrates seamlessly into complete lines alongside rinsing, labeling, coding, case packing, and palletizing systems. It is suitable for both new installations and upgrades where it must connect to an existing used bottling line or second hand equipment. Quick-change format parts support fast shifts among the available bottle sizes, while the cap feeder and 6-head press-on capper are tuned for 28–30 mm closures. The weight-filling architecture is versatile for oil applications and maintains accuracy across minor density or temperature changes. The machine communicates effectively with upstream rinsers and downstream labeling machines common in beverage production and food-grade industrial packaging environments. Machine Condition & Maintenance History The machine is in NEW condition and ready for commissioning. It is supplied with manuals to support installation, operation, and preventive maintenance. Wear components are designed for straightforward access, and the contactless, gravity-based design minimizes mechanical complexity. A recommended spare parts list can be...

Year of construction: 2000, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 68370, SMB Technik Multima 9R/9L/3K automatic beer bottling monobloc for rinsing, counter-pressure filling and crown capping of glass bottles. The machine was previously in operation at a Norwegian brewery. Following the sale and removal of the labelling machine, an electric motor is required to drive the bottling line. The electric motor is not included in the sale. Nsdoz Dhrqjpfx Aatown The SMB rinsing, filling and capping monobloc was operational prior to this change and can be inspected at its current location in Norway. CONFIGURATION * 9-station bottle rinser * 9-head counter-pressure filler * 3-head crown capper * Automatic bottle transfer through rinsing, filling and capping sections * Conveyor sections * CO₂ counter-pressure / isobaric filling * Long-tube bottom-up filling * Separate bottle pressurising and return-gas system * Automatic filler bowl level and pressure control * High-pressure injection / jetter before capping * Electrically interlocked safety doors * Automatic bottle presence monitoring FILLING PROCESS The Multima is designed for bottling beer in glass bottles. Bottles are rinsed before being transferred to the filling section. Before filling, the bottles are pressurised, normally using CO₂. Beer is then filled from the bottom through long filling tubes. The system uses separate channels for bottle pressurising gas and return gas and is designed to minimise turbulence, foaming and oxygen uptake. After filling, the bottles pass a high-pressure injection device (jetter), which produces controlled foaming to help displace air from the bottle neck immediately before crown capping. TECHNICAL DATA Manufacturer: SMB Technik GmbH, Mannheim, Germany Model: Multima 9R/9L/3K Year: 2000 Serial number: 68370 Electrical supply: 400 V / 50 Hz Current: 12 A Container: Glass bottles Product: Beer Closure: Crown caps Filling principle: Counter-pressure / isobaric Rinser: 9 stations Filler: 9 filling valves Capper: 3 heads A 400 V to 230 V converter is included in the sale. DOCUMENTATION Extensive original SMB technical documentation is available, including operating instructions, setup and adjustment procedures, bottle changeover information, cleaning and sanitising procedures, maintenance and troubleshooting information, as well as filling-valve technical documentation. IMPORTANT The labelling machine has been sold separately and is NOT included. An electric motor is required to operate the bottling line and is NOT included. Tanks and other brewery equipment visible in the photographs are not included unless specifically agreed. The machine is located in Norway and can be inspected by appointment. Dismantling, loading and transport can be discussed separately.

Condition: like new (used), Year of construction: 2021, operating hours: 100 h, functionality: fully functional, machine/vehicle number: 13902, Equipment: low noise, Groninger MFCS 201 RH – Filling, closing, and labeling machine – Year of manufacture: 2021 – Like new For sale is a high-quality, fully automatic filling, closing, and labeling machine from the German manufacturer Groninger GmbH & Co. KG. Type: MFCS 201 RH, machine no. 13902, year of manufacture 2021. The machine was installed and put into operation at our location in Solingen in 2022. Nodpsz R A Sgefx Aatewn The machine has been used very little and is in almost new condition. In total, only approximately 300,000 containers have been filled with it. For the majority of the time, the system was idle and not used in continuous or multi-shift operation. Individual components, in particular the integrated labeling system, were not used at all in our production facility. The verifiable new price of the machine without laminar flow was €630,000 net. The machine is sold without the laminar flow unit. The system is designed for a capacity of up to 60 units/min or approximately 3,600 units/hour. The existing format is designed for micro-screw caps. The documented filling volume is approximately 0.3 ml. The existing container has a diameter of approximately 11 mm and a height of approximately 43.9 mm; the screw cap has a diameter of approximately 13 mm. Other formats are possible; however, format parts would then need to be manufactured. The machine features a Groninger peristaltic/hose pump filling system with a filling needle and automatic filling needle movement. The containers are automatically fed via a vibrating hopper and sorting unit and transported through the machine via a timed conveyor. The screw caps are also sorted and fed fully automatically. The system features pre-closing and final closing stations, closure control, and automatic good/bad part sorting. Integrated is a fully automatic all-round labeling station with a servo-motorized CAB labeling system. In addition, a Markem thermal transfer printer is integrated for variable markings such as batch and date, as well as a check for "print present." The system also features recipe management, user management, diagnostics and service functions, a piece counter, alarm/event displays, and remote maintenance capabilities via a VPN router. An original Groninger EC/EU declaration of conformity is available. The machine complies with, among other things, Machinery Directive 2006/42/EC and the EMC Directive 2014/30/EU. The complete, extensive Groninger original documentation is available, including operating, maintenance, and repair documents, spare parts and wear parts lists, format documents, pneumatic and layout plans, and FAT documentation. The machine has been professionally disassembled by us and is currently stored safely. The disassembly was documented in a video. We can support the buyer in reassembling the machine and explain the operation and functionality of the machine. Alternatively, Groninger can, of course, be brought in for assembly, commissioning, and service. There is also an existing order for this machine that the new buyer can fulfill if the client wishes. The client is from Switzerland and has an order volume of €60,000 per year. Location: 42699 Solingen, Germany. Inspection possible by appointment. We will gladly provide further technical documents upon request from a seriously interested buyer.

Condition: used, Year of construction: 2006, machine/vehicle number: M324, Used SACMI VOLOMAS 3S10020 filling triblockTechnical Specifications & Performance DataThis rotary isobaric filling monoblock is engineered for high-speed PET bottle applications in beverage production and industrial packaging. Designed and manufactured by Sacmi, it combines precise filling with integrated capping to deliver reliable performance in a used bottling line or second hand packaging environment. With neck-handling transfer and CO2 capability, it is suitable for both still and carbonated products, including soft drinks.Production speed: up to 40,000 bottles per hourCurrent bottle format: 1.0LContainer type: PET bottles, neck-handling transferFiller valves: 100Capper heads: 20Machine type: Rotary, counterclockwise rotationCO2 capability: Yes (isobaric filling for carbonated products)Maximum container height: 350 mmMachine pitch: 113.1 mmOverall dimensions (mm): 8,964 x 6,663Electrical supply: 400V, 3Ph + Earth, 50 HzInstalled power: 25 kWWorking pressure: 6 barModel code: VOLOMAS 3S/100/20Advanced Automation & Control SystemsThe monoblock integrates robust automation for stable, repeatable operations and quick format handling. Operator-friendly controls and diagnostics streamline changeovers and daily production tasks.Control system: PLC and HMI by leading industrial automation platformsAutomation: Fully integrated monoblock with synchronized filling and capping turretsQuick change: Neck-handling design to minimize mechanical adjustments between formatsElectrical specs: 400V, 50 Hz, 25 kWOperator protection: Enclosed guardings with interlocks and emergency stopsProduction Line Integration CapabilitiesOptimized for in-line operation within complete bottling lines, this monoblock interfaces seamlessly with upstream and downstream equipment in beverage production and industrial packaging environments.Integration: Compatible with conveyors, premix/carbonation systems, and downstream labeling/packagingOperation modes: In-line with synchronized transfer at the neckFlexibility: Suited for PET bottle ranges including typical sizes such as 0.5L and 1.0LAccessories included: Cap elevator, premix interface, and CIP connectionMachine Condition & Maintenance HistoryThis second hand filling monoblock is presented refurbished and guaranteed, ready for operation with compatible spare parts. It is configured for 1.0L PET and is prepared for rapid commissioning within a used bottling line.Status: Ready for operationCondition: Refurbished and guaranteedSpare parts: Delivered with c... Nwjdpfx Aao Adyy Hoton

Condition: used, Year of construction: 2004, machine/vehicle number: PAL55, Used OCME PERSEUS L12 palletizer 22680 BPHTechnical Specifications & Performance DataThe OCME Perseus L12 Palletizer is a conventional automatic palletizing system engineered for wrap-around packs and cases. Built in 2004 and featuring a robust mechanical design with Siemens automation, it delivers reliable performance for high-volume beverage and food packaging environments. Designed to handle products packed in cartons coming from upstream wrap-around or case packing machines, it supports standardized pallet formats for streamlined logistics and warehousing.Manufacturer: OCMEModel: Perseus L12Machine type: Palletizer (conventional, low-level infeed)Year of manufacture: 2004Maximum speed: 22680 (3x2 pattern)Handled unit: Wrap-around packs / casesSupported pallets: EPAL 800x1200 mmContainer materials downstream of packs: PET, Glass, Aluminum cansAutomation: Siemens PLCCompressed air: 6 barLayer pad inserter: AutomaticCompliance: CE-markedAdvanced Automation & Control SystemsThe Perseus L12 integrates a Siemens PLC for dependable control, recipe management, and precise coordination of infeed, layering, and discharge operations. The HMI-driven interface enables quick format selection and parameter adjustments to minimize downtime. Safety interlocks and a multi-color stack light provide clear visual status and enhance operator awareness. Modular programming supports stable layer formation and accurate placement of interlayer pads to ensure load integrity.Siemens PLC with user-friendly HMIRecipe-based format management for rapid changeoversIntegrated safety interlocks and emergency stop circuitsAutomated layer pad insertion synchronizationProduction Line Integration CapabilitiesEngineered for seamless integration into a used bottling line or second hand industrial packaging setup, the Perseus L12 accepts cartons from wrap-around or case packers and forms stable pallet loads. It interfaces easily with standard conveyor systems and can be configured for various layout constraints due to its low-level infeed design. It is suitable for beverage production handling of PET, glass, and aluminum can packs, making it ideal for water, CSD, beer, wine, milk, oil, and spirits applications.Inline operation with wrap-around packers and case packersDesigned for PET, Glass, and Aluminum can packsOptimized for EPAL 800x1200 palletsMulti-format flexibility for diverse product SKUsMachine Condition & Maintenance HistoryThis palletizer is ready for operation, overhauled, and offered with compatible spare parts. It includes a warranty period to ensure dependable startup and performance. The overall condition supports immediate deployment into beverage or food packaging lines with minimal commissioning effort.Ready for immediate useOverhauled with compatible spare partsWarrant... Nwedpo Adyu Rsfx Aatjn

Condition: used, Year of construction: 2005, machine/vehicle number: M272, Used Filling Monoblock GAI 2405 1500 bph pre-owned monoblock filler / used bottle filling triblockThis Monoblock offers, therefore, a highly specialized solution for bottling still wine in glass containers, designed to meet the needs of technical precision and production continuity for industry operators. GAI manufactured this machine in 2005, and it achieves a filling speed of 1500 bottles per hour, which ensures, in turn, high efficiency for medium-capacity production lines. As a monoblock filling machine (often searched as a used bottle filling triblock integrating rinser, filler, and capper), this pre-owned solution is ideal for wineries seeking a compact, reliable monoblock filler within a single frame.Filling Specifications of the Used filling monoblock GAI The filling system of the GAI 2405 monoblock, meanwhile, delivers high precision in handling the product, maintaining consistent operating conditions. This model, in particular, uses 12 gravity or light depression filling valves, which effectively prevent turbulence or alteration of the still wine during processing. The filling valves, consequently, stay in a fixed position, reducing the risk of contamination or leaks. As a gravity/light-depression system, it is not an isobaric configuration, making it well-suited to still products while remaining compatible with ancillary options such as a nitrogenator upstream or downstream if the line owner wishes to manage dissolved oxygen more tightly. These traits make it highly competitive among monoblock filling machines for still beverages.Rinsing Section The Used Filling Monoblock GAI 2405 1500 bph rinsing system includes 12 grippers that perform a cleaning treatment for each bottle. The system, thus, completes rinsing in a single phase, which removes any residual particles inside the containers before filling. This single-treatment configuration, additionally, optimizes processing time and improves overall speed without compromising quality. In the context of a compact used bottle filling triblock, this integrated rinser enhances hygiene while maintaining a streamlined footprint.Capping Features The capping section of this model of Used filling monoblock GAI supports straight corks and includes one head for cork insertion, which enables the production of still wine in formats of 0.75 L, 1.0 L, and 1.5 L. This head is specifically designed to drive the corks into a flush-fitting position. This feature of operating with straight corks, as a result, ensures adherence to the traditional characteristics of the final product and, in turn, meets specific market demands. Within a monoblock filling machine architecture, this single-head corker provides dependable, repeatable cork application aligned with premium still-wine presentation.Design and Structure The Monoblock features a design that ensures long operational life and easy maintenance. Operators can access each component for cleaning and inspection, allowing for safe and efficient management of the machine. Moreover, the integration of rinsing, filling, and capping sections into a single unit reduces the machine’s footprint, which, therefore, optimizes space in the facility. The turret rotation is clock... Njdpfe Adywrsx Aatjwn

Year of construction: 2006, condition: used, machine/vehicle number: PX20, Used KHS INNOPRO CMX-18 mixer 18 m³-h - Year 2006Technical Specifications & Performance DataThe KHS INNOPRO CMX-18 is a premix mixer designed for beverage production and integration into an industrial packaging or used bottling line. Manufactured in 2006, this process unit has a nominal capacity of 18 m³/h and is engineered to prepare, deaerate, mix and transfer beverage product toward the filling area.Manufacturer: KHSModel: INNOPRO CMX-18Manufacturing year: 2006Nominal capacity: 18 m³/hBuffer tank capacity: 850 LMaximum pressure: 8 barTest pressure: 11.44 barTemperature range: 20 / 100 °CAdvanced Automation & Control SystemsThe premix system includes process instrumentation for pressure, flow and level monitoring. Flow transmitters, flow-indicating controllers, pressure indicators, pressure alarms, pressure switches, level switches and level alarms support controlled product handling through the deaeration, transfer and buffer stages.Control air is supplied at 4–5 bar, with an associated gas or air line indicated at 6–6.5 bar. The process arrangement includes controlled flow sections and valve manifolds for product routing, CIP circulation and syrup-return functions.Production Line Integration CapabilitiesThis KHS premix mixer is suited to installation upstream of a filler in a beverage production line. The process schematic shows a dedicated outlet connection to the filler, allowing the prepared product to be transferred from the buffer tank to downstream filling equipment.Water and CIP connections are integrated into the valve manifold, while dedicated CIP syrup-return branches support cleaning and product-return operations. The system uses carbon dioxide supply connections for deaeration and beverage preparation, making it appropriate for production environments where controlled mixing and gas management are required.Water connection: Ø2.1/2"CIP connection: Ø2.1/2"CIP syrup-return connections: Ø1.1/2"Filler outlet connection: Ø4"Sealing-water connection: DN15Machine Condition & Maintenance HistoryThis second hand KHS premix mixer was manufactured in 2006. The available technical documentation identifies the process configuration, vessel ratings, utility connections and instrumentation layout. The equipment is configured as a complete mixing and transfer unit with deaeration, buffer storage, pumps and process-control instruments.Operational Performance & VersatilityThe INNOPRO CMX-18 incorporates a deaeration vessel, buffer tank, six pumps and a product-transfer circuit. Product passes through controlled flow sections before entering the buffer tank and being pumped toward the filler. Carbon dioxide connections, deaeration capability and a dedicated buffer stage support stable product preparation before packaging.The integrated CIP and syrup-return manifold enables cleaning circulation through the process circuit. This configuration is valuable for beverage production operations requiring hygienic product changeover and e... Nwedpfxs Adtqre Aaton

Condition: used, Year of construction: 2004, machine/vehicle number: DEPAL41, Used ACMI RASAR D200 depalletizerTechnical Specifications & Performance DataThis ACMI RASAR D200 depalletizer is a reliable solution for high-efficiency bottle handling within a used bottling line or second hand industrial packaging environment. Engineered for beverage production and general industrial packaging, it processes layers of bottles from standard pallets with precise and gentle handling. Designed for glass and PET bottle applications, it offers stable performance for multiple beverage categories, ensuring dependable operation in demanding production schedules.Manufacturer: ACMIModel: RASAR D200Year: 2004Machine type: DepalletizerMaximum speed: 16,200 bph (application dependent)Container materials: Glass, PETPallets handled: EPAL 800x1200 mmWorking height: 1200 mmOperating pressure: 6 barSupply voltage: 400 V (3PH + N)Frequency: 50 HzRated current: 51 AAuxiliary voltage: 24 V DCShort-circuit rating: 6 kAElectrical schematic code: EOC3691Approx. layout dimensions: length 14,367 mm; width 4,915 mmAdvanced Automation & Control SystemsThe ACMI RASAR D200 features an industrial-grade automation package centered on a Siemens PLC, delivering robust control, diagnostic capability, and stable operation. The control system supports automatic layer handling with coordinated movements for layer separation and transfer to downstream conveyors. Electrical architecture uses a 400 V three-phase supply with 24 V DC auxiliaries for sensors and control devices, ensuring safe and reliable low-voltage control.Siemens PLC-based control for dependable automation24 V DC auxiliary circuits for instrumentationClear operator interface and status signaling for quick troubleshootingIntegrated interlocks for safe operation and process controlProduction Line Integration CapabilitiesThe depalletizer integrates seamlessly into beverage production lines and broader packaging machinery systems. It interfaces with infeed/outfeed conveyors and can operate as a standalone depalletizing cell or as part of a complete bottling line. The RASAR D200 handles EPAL 800x1200 mm pallets and can be set up for multiple bottle patterns and sizes within glass and PET ranges, supporting flexible changeovers for different end products.Inline or standalone operation modesCompatible with upstream pallet handling and downstream bottle conveyorsDesigned for Glass and PET bottle handling across various sizesSuitable for Water, CSD, Wine, Beer, Spirits, Milk, and Oil applicationsMachine Condition & Maintenance HistoryThis unit is ready for operation and presented in excellent working order. It has been overhauled and is supplied with compatible spare parts. A warranty support period of 6 months is indicated, reinforc... Nwodj Adtz Rjpfx Aatjn

Condition: used, Year of construction: 2007, machine/vehicle number: PAL53, Used COMACO PA4B palletizer 10800 BPHTechnical Specifications & Performance DataThe Comaco PA4B is a second hand, overhauled palletizer engineered for reliable end-of-line handling in beverage production and industrial packaging. Built in 2007 and professionally refurbished, this unit delivers robust performance with a maximum throughput of up to 10,800 bottles per hour (3x2 configuration), making it a strong fit for used bottling line upgrades where efficiency and footprint matter.Model: PA4BManufacturer: ComacoYear: 2007Maximum speed: 10,800 bottles per hour (3x2 pattern)Container materials supported: Aluminum cans, PET bottles, Glass bottlesPallet formats: Eur-Epal 800x1200 mm; 1000x1200 mmInstalled power: 1.4 kWElectrical supply: 400 V, 50 HzWorking pressure: 6 barApproximate footprint: 8165 x 7777 mmLayout note: Working height H = 1100 mm (as indicated on layout)Configuration: Conventional automatic palletizer with automatic layer-pad inserterAdvanced Automation & Control SystemsDesigned for dependable automation, the PA4B integrates proven Siemens control technology for stable operation and easy diagnostics. A Siemens Simatic HMI provides intuitive operator interaction, while the Siemens S7 PLC ensures precise motion control and sequencing.HMI: Siemens SimaticPLC: Siemens S7Operational mode: Conventional automatic palletizing with layer-pad applicationChangeover: Practical adjustments for varying pack patterns and container typesProduction Line Integration CapabilitiesThe Comaco PA4B integrates smoothly with upstream packaging machinery such as shrink wrappers, wrap-around case packers, and conveyors. It handles a wide range of secondary packaging units, including bundles, cases, and tray-packs, supporting both PET and Glass bottle lines as well as Aluminum cans.Inline/standalone: Suitable for inline integration or standalone operationHandled units: Bundles, cases, tray-packsMulti-product flexibility: Compatible with water, CSD, beer, wine, milk, oil, and spirits workflowsPallet formats: Eur-Epal 800x1200 mm; 1000x1200 mmMachine Condition & Maintenance HistoryThis palletizer is overhauled, tested, and ready for operation. Supplied in excellent working order with a commercial guarantee, it is an ideal choice for facilities seeking a reliable second hand upgrade with minimized commissioning risk.Status: Ready for immediate useCondition: Overhauled and guaranteedWarranty: 6 monthsSpare parts: Compatible spare parts availableOperational Performance & VersatilityThe PA4B addresses diverse end-of-line need... Nwjdpj Adtzqjfx Aatsn

Condition: used, Year of construction: 2005, operating hours: 16,412 h, machine/vehicle number: R96, Used Tetra Pak A3Flex 1000 Base - Year 2005Technical Specifications & Performance DataThe Tetra Pak A3/Flex 1000 Base is an aseptic carton filling machine designed for industrial packaging and beverage production. It forms, fills and seals carton packs in a controlled filling process, supporting efficient integration into an aseptic carton packaging operation.Manufacturer: Tetra PakModel: A3/Flex 1000 BaseDrawing specification: 648576-0100Year of manufacture: 2005Advanced Automation & Control SystemsThis filling machine is intended for automated carton handling, forming, filling and sealing within an industrial packaging line. The A3/Flex platform supports coordinated operation with upstream product preparation and downstream conveying, packing and coding equipment.Production Line Integration CapabilitiesSuitable for use as the central filling station in an aseptic carton production line, this machine can be integrated with carton handling conveyors, accumulation systems, secondary packaging machinery and line control equipment. Aseptic carton filling technology is widely applied in beverage production and other liquid-food packaging operations where sealed carton packs are required.The machine can be positioned downstream of product processing and upstream of conveying, coding and final packaging equipment. Integration should account for product supply, carton material handling, discharge conveyors and synchronization with downstream industrial packaging machinery.Machine Condition & Maintenance HistorySpare parts will be replaced as needed. This maintenance approach supports continued machine serviceability and helps maintain operational readiness for a second hand aseptic filling installation.Operational Performance & VersatilityThe Tetra Pak A3/Flex 1000 Base is built for automated carton filling applications. As part of a used bottling line or carton packaging operation, this type of equipment provides a dedicated solution for producing filled and sealed carton packs while supporting consistent handling through the filling and discharge stages.Installation Requirements & Site PreparationInstallation requires a suitably prepared production area with access for product feeding, packaging-material supply, electrical connection and discharge conveyor integration. Site planning should also allow adequate access for operation, cleaning, maintenance and replacement of service parts.Safety Standards & Compliance CertificationSafe installation and operation require the machine to be integrated with appropriate guards, operator access controls and emergency-stop provisions for the complete production line. Before commissioning, all safety devices, utility connections and hygiene-related operating procedures should be checked as part of the site acceptance process. Nwjdpfx Aaj Adttyotjn

Condition: used, Year of construction: 2004, machine/vehicle number: M284, Used filling monoblock OCIM for oil tins 1000 bph The used OCIM filling monoblock for oil tins 1000 bph efficiently bottles oil in metal containers. Notably, OCIM manufactured this plant in 2004, ensuring high operational reliability with its robust mechanical structure. Moreover, its optimized filling system delivers precision and continuity in the production process. Technical specifications of teh Filling monoblock OCIM for oil Tins The OCIM monoblock model 8.5 fills 1000 tins par hour, thus maintaining efficient and stable production. Additionally, the system applies a gravity or light vacuum filling method, effectively handling viscous liquids such as oil. Furthermore, 8 fixed valves distribute uniform doses into each container. The machine processes different oil tin formats, specifically: 1-liter oval-shaped tin 3- and 5-liter rectangular tins Consequently, with its adaptable configuration, the OCIM monoblock quickly adjusts to various formats, thereby enhancing production line efficiency. Capping system and safety features For sealing containers, the monoblock utilizes a system with 1 capping head, specifically designed for pull-out spout caps. In particular, the machine supports a 38.5 mm cap diameter, a standard in the edible oil bottling industry. Additionally, the machine incorporates safety devices that protect operators and ensure compliance with industrial regulations. As a result, these systems reduce operational errors and maintain reliable long-term performance. Current state and operational configuration of the Filling monoblock OCIM for oil Tins Nodpj Adt T Tofx Aatswn Currently, the used OCIM filling monoblock for oil tins 1000 bph operates continuously in production, meaning it functions without significant interruptions. Furthermore, the system’s clockwise rotation integrates smoothly into existing lines without requiring complex mechanical adaptations. Given these advantages, this machine provides an optimal solution for companies seeking a reliable, precise, and high-performance bottling plant for oil in metal containers. Moreover, with its modular design and compatibility with various formats, the OCIM monoblock maximizes production efficiency and minimizes machine downtime, which are crucial factors in the industrial bottling sector. Consequently, businesses can ensure continuous and cost-effective operations. Similarly, its adaptability makes it a viable choice for various production demands. In conclusion, this monoblock stands out as a dependable asset in the bottling industry.

Condition: used, Year of construction: 1998, machine/vehicle number: M310, Technical Specifications & Performance Data Nsdpfx Ae Ady Ecjatewn This Rinsing-Filling-Capping Triblock by FIMER is a robust rotary monoblock engineered for glass bottle handling and precision filling. Built on the model SRT 24-24-6, it integrates a 24-clamp rinser with mobile nozzle, a 24-valve gravity/light depression filler, and a 6-head aluminum screw capper. Designed for reliable operation in beverage production and industrial packaging, it is suitable for second hand and used bottling line upgrades where consistent performance and compact footprint are priorities. Manufacturer: FIMER Model: SRT 24-24-6 Year: 1998 Rinser: 24 grippers, mobile nozzle Filler: 24 valves, gravity/light depression (slight vacuum) Capper: 6 heads, aluminum screw caps 31,5 x 18 Cap handling: Complete with cap elevator Electrical power: 6.5 kW Power supply: 380 V, 50 Hz Compressed air: Max 6 bar Construction: Rotary triblock for glass bottles Advanced Automation & Control Systems The triblock integrates coordinated rotary turrets for synchronized rinsing, filling, and capping. It is designed for straightforward operation with clear machine status visibility and quick access to critical areas for adjustments. The filler operates on gravity/light depression principles for stable liquid level control, ideal for products like vinegar in glass bottles. Electrical configuration: 380 V, 50 Hz Installed power: 6.5 kW Filling technology: Gravity/light depression for accurate, low-turbulence filling Safety systems: CE-marked with protective guarding and emergency stop circuits Changeover: Format changes supported via standard change parts Production Line Integration Capabilities This unit can be integrated into a complete used bottling line or operate as a standalone monoblock in glass bottling applications. It interfaces easily with upstream bottle conveyors and downstream inspection, labeling, and packaging machinery in beverage production and industrial packaging environments. Operation mode: Inline integration or standalone Container handling: Designed for glass bottles Cap logistics: Integrated cap elevator for continuous feeding Applications: Suitable for vinegar and similar still products Machine Condition & Maintenance History The triblock comes from a professional bottling context and is presented as a second hand solution in working condition, ready for operation. The configuration and components indicate routine industrial use with standard maintenance practices typical of glass bottling environments. Status: Ready for operation Usage: Previously used to fill vinegar into glass bottles Operational Performance & Versatility With 24 rinsing grippers and 24 filling valves, the machine provides balanced throughput, while the 6-head capper ensures consistent aluminum screw cap applicat...

Condition: excellent (used), Year of construction: 2025, operating hours: 6 h, machine/vehicle number: ZS-AFC37, total width: 1,300 mm, total length: 1,650 mm, total height: 1,500 mm, filling weight (max.): 40 g, filling weight (min.): 10 g, We offer this very good ZONESUN ZS-AFC37 tube filling machine, year of construction 2025. RRP is 13,799 USD The machine has only been used to fill 9000 tubes, so is almost brand new. Unfortunately our client decided to stop this product so we no longer have a use for it. Priced very low for a quick sale to avoid storage costs. It can be used to fill any liquid, including viscous liquids. We used it for olive oil, and the tubes are food safe. Also suitable for cosmetic gels and creams. It can do 1,800 tubes or bottles in an hour. Nedpfxsz R Rkxo Aatewn The machine does everything automatically, it is incredible, and very easily adjusted using the touch screen controls. The user only needs to add tubes to the input tray, and take the tubes off the out-tray. Compressor and long lead included if you wish. More details on ZONESUN's website. The ZONESUN ZS-AFC37 is a fully automated monoblock rotary filling and capping machine designed for precise liquid vial packaging. Featuring dual peristaltic pumps and servo-driven control, it delivers ±1% filling accuracy and a throughput of 30–35 bottles per minute. Ideal for chemical, cosmetic, and pharmaceutical applications, it supports customizable filling volumes and uses #17 hoses for hygienic, contamination-free dispensing. Compact and efficient, this system integrates filling and capping into one streamlined unit, reducing labor and maximizing output in cleanroom or production environments. Manufacturer: ZONESUN Model: ZS-AFC37 Filling volume: 10ml - 40ml Filling accuracy: ±1 % Working capacity: 30-35 BPM Machine voltage: 110/220 V Frequency: 50-60 Hz Filling pump type: Peristaltic pump Filling hose: #17 Machine dimensions (L×W×H): 1650×1300×1500 mm Package dimensions (L×W×H): 1470×1650×1700 mm Package weight: 644 kg If you have any questions or need more information, feel free to send us a message or give us a call.