Used Canned Filling for sale (25,792)

Condition: used, Year of construction: 2003, machine/vehicle number: LC644, Used SIG CSD can filling line 30000 BPHTechnical Specifications & Performance DataThis used bottling line features industrial components engineered by Krones and SIG Simonazzi, suitable for second hand industrial packaging and beverage production environments. Verified data plates provide key technical values to support integration and qualification.Year of construction: 2003Electrical supply: 400 V, 3-phaseFrequency: 50 HzRated current: 37 AShort-circuit rating (ICW/ICU): 1.26 kAPressure vessel volume: 504 litersTest pressure (PT): 11.44 barAllowable temperature range (TS): -4 °C to 50 °CCompliance: CE 0036Manufacturers: Krones, SIG SimonazziAdvanced Automation & Control SystemsThe line incorporates an industrial-grade power and control architecture designed for reliable 24/7 operation in beverage packaging. Three-phase power distribution at 400 V and 50 Hz supports stable performance of key units, with a 37 A rated current on the main controlled section referenced. Protective coordination and short-circuit withstand ratings (ICW/ICU) are identified to 1.26 kA, aligning with robust switchgear and control cabinet design. Operator interfaces, interlocks, and modular controls can be paired with upstream/downstream equipment to streamline changeovers and routine operation.Production Line Integration CapabilitiesEngineered for seamless integration into complete packaging lines, the equipment accommodates conventional upstream and downstream modules such as rinsing, filling, capping, labeling, conveying, inspection, and end-of-line packaging. The documented pressure vessel capacity (504 liters) supports process stability for buffer or service functions within a bottling layout. Modular connectivity enables inline operation with standard conveyor systems and synchronizes with typical line controls used in beverage production.Machine Condition & Maintenance HistoryThe components carry CE markings and documented nameplate data confirming construction year and key safety/pressure parameters. Industrial construction by Krones and SIG Simonazzi is indicative of long service life and high reliability when maintained according to OEM guidelines. Actual runtime, service records, and overhauls should be verified during inspection to align with targeted performance and validation requirements.Operational Performance & VersatilityThis second hand bottling equipment is suitable for a wide range of industrial packaging applications in beverage production. The pressure-rated vessel supports stable process conditions, while the electrical configuration is appropriate for common European plant utilities. The line can be configured with compatible modules to match target output, quality controls, and packaging formats as required by the specific production program.Installation Requirements & Site PreparationInstallation requires 400 V, 3-phase, 50 Hz power. Site preparation should consider adequate space for line layout, access for operation and maintenance, and routing for utilities such... Pgsdpfx Abszd Uftsbon

Condition: ready for operation (used), Can filling machine diameter 77 mm and 99 mm. VEMAG type FKF for filling in cans. Note: Pgodpoimblqofx Abbjn The byer will another machine- same as the offered for spare parts.

Condition: used, Year of construction: 2018, operating hours: 3,500 h, machine/vehicle number: LC636, Used filling KHS Innofill can line 16000 CPH - year 2018Technical Specifications & Performance DataThis complete used bottling line is a second hand beverage canning system engineered around a KHS can filler block, integrated with high-quality upstream and downstream packaging machinery. Designed for industrial packaging and beverage production, it delivers reliable performance for aluminum cans.Production speed: up to 16000 cph (cans per hour)Primary filler: KHS Innofill Can C (2018)Can seamer: Ferrum FC03 (2018)Depalletizer: SKA Fabricating Can-I-BusInspector: Heuft fill level detectorRinser: AV-C500 can air rinserDryer: Air Control Industries can dryerLabeller: Pack Leader (Advanced Dynamics system)Case packer: Atlanta Rafaello 726Case coding: SATO S86-EX printerConveyors: KHS and AE Conveyors, plus KBR outfeed belt conveyor with PCUtilities/auxiliaries: Conveyor lubricator (Loewados)Container type: Aluminum cansDocumentation: Hard‑copy manuals includedAdvanced Automation & Control SystemsThe line is equipped with dedicated control cabinets for conveyors and labeling, supporting coordinated start/stop logic and smooth product handling. The KHS Innofill Can C filler block provides modern automation architecture with line-friendly integration, recipe handling, and synchronized drives for consistent filling and seaming operations. Safety interlocks and guarding are present across key stations for operator protection and process reliability.Production Line Integration CapabilitiesThis packaging line offers end-to-end integration from depalletizing to case packing, enabling seamless flow of cans through rinsing, filling, seaming, inspection, drying, labeling, and secondary packaging. Modular conveyors by KHS, AE Conveyors, and KBR facilitate balanced accumulation and stable transfer, helping maintain throughput at rated speeds. The configuration is suitable for a wide range of beverage production scenarios and can be adapted to different aluminum can sizes with appropriate change parts and guides.Machine Condition & Maintenance HistoryAs a second hand used bottling line, the core process equipment includes 2018-generation KHS Innofill Can C filler and Ferrum FC03 seamer. The asset list indicates a complete, coherent set of stations with hard‑copy manuals available, supporting efficient commissioning, maintenance, and spare parts management. The line is presented in working condition and ready for operation, subject to standard site preparation and utilities.Operational Performance & VersatilityDesigned for high-efficiency can handling, the line features a SKA Fabricating depalletizer for automated infeed, an air rinser for internal container preparation, precise isometric filling via KHS Innofill Can C, and robust double seaming with the Ferrum FC03. Quality assurance is enhanced by a Heuft fill level detector. Downstream, an Air Control Industries dryer pre... Psdpfxjy Szbye Abbjgn

Year of construction: 2014, condition: excellent (used), 1- 250 ml slim 330 ml sleek 500 ml base Ektam filler mega block 40/6 CFT seamer made in Italy 6 heads 2014 model Pedpfx Asyxg Irjbbsgn Line is in or working condition

Condition: ready for operation (used), Year of construction: 2012, A large-format can filling and closing machine JBT FoodTech from the food industry is available. Can weight: 750g/1000g, can content: sweetened condensed milk, max. throughput capacity: 600cans/min, filling heads: 22, closing heads: 5, design: monoblock, control system: Siemens. Documentation available. An on-site inspection is possible. Psdoy N Uv Sepfx Abbegn

Condition: ready for operation (used), Year of construction: 1987, A fully automatic Ferrum can filling and sealing machine is available. Can weight: 397g, can content: sweetened condensed milk, sealing heads: 6, throughput capacity: approx. 250cans/min, machine dimensions X/Y/Z: approx. 2300mm/1550mm/2300mm, weight: approx. 3500kg. The filling bowl has been repaired several times. Documentation available. An on-site inspection is possible. Expected to be available around September 2026. Psdpfx Aey N Uvxjbbegn

Year of construction: 2020, condition: new, Counter-pressure can filling machine Eurostar Canfill 6 One Filling capacity: 2000 cans/h with 0.33 liter cans Psdpoq H Azljfx Abbogn 1500 cans/h for 0.50 liter cans Sleek and standard cans can be filled and sealed with the same lid (type 202).

Condition: used, Manufacturer : Indosa Origin : Suisse Year: 1990 (completely upgraded in 2006 with Siemens PLC)   Pgsdpfxsx R Dype Abbon Main machine: Indosa Matic 100 automatic seamer Filling / dosing: AW7/500 module Vacuum / dust collector: CK-V09 system Accumulation table: ZT800 Transport: 12-station star wheel Product feed: pneumatic transfer   Machine type: Automatic filling and sealing line for cans Box type: metal or composite Applications : Dry and granular products Examples: Tobacco, powder, granules, dry foods, solid products   Capacity: up to 40-50 units/min (integrated speed control) Can diameter Ø 80 mm standard (other sizes available on request) Box heights from 20 to 320 mm Dosing type : Weight (vibrator + bucket) Product supply : Pneumatic transfer Metal cover seaming, integrated seaming module Vacuum Integrated dust collection module CK-V09 Lid storage feeder : Yes Automatic control   Documents available in digital format.   Status / Additional information: video available in operation

Condition: like new (used), The can seamer is the machine used to hermetically seal the lid to the can body before sterilization. Depending on the product, sterilization can also be performed before filling. The can is sealed by deforming and subsequently overlapping the metal layers of the can body and the lid through compression. The result is a type of hook between the two, which achieves a hermetic seal and, consequently, the airtightness of the container. This sealing requires a rubber gasket (sealing gasket) inserted into the rim of the lid to achieve the most effective bonding of the metal layers. Psdpozbi Niefx Abbogn Production will depend on the format and the product to be sealed.

Condition: used, Year of construction: 2022, Linearly aligned can filler with rinser, filler, lid depositor and seamer in one block. Counter-pressure filling is controlled volumetrically. Format changeover for all standard can sizes. Capacity: 2000 cans/h for carbonated drinks Max. oxygen pickup on the filler: 25 ppb Compressed air: IG 1/2", 6-10 bar Length: 2774 mm Pjdexbn Icspfx Abbogn Width: 1100 mm Height: 2000 mm Formats: 12 oz and 16 oz cans, lid type 202 B64, conversion to other formats possible Operation / Control: Siemens Simatic S7 Features: 6 filling stations, 7 inch touchscreen with swivel arm, infeed screw, product buffer tank (3 bar), servo driven seamer, tunnel for can rinsing after filling, motors by SEW

Condition: used, Year of construction: 2019, Overview  This isobaric can filling monoblock was manufactured in 2019 by Italy GAI. The GAI MLE 6661 CAN is designed for filling beverages into cans. The machine is already dismantled and stored and is available immediately. Technical data  Capacity: up to 1,600 cph (33 cl); output up to 650 L/h Formats: 33 cl standard, 33 cl sleek, 50 cl standard Application: Can filling Configuration: Linear monoblock with 6 rinsing valves, 6 filling valves, 1 single-head lid seamer, weight control with expeller, cans washing tunnel, lids storing columns Lid format: CDL202 Can diameter: 50 mm – 85 mm Pjdpfx Absyudacjbegn

Condition: new, Filling machine designed for packing delicate vegetables into any type of container. This machine is capable of operating with round, oval, square, or other shaped containers. Product is loaded into the machine via the elevator hopper, utilizing the thermoplastic mesh and its buckets, which transport the product to the loading conveyor, progressively unloading it and distributing it across the entire effective width of the belt. The loading belt transfers the product to the filling hopper, which is pre-adjusted according to the container type, and the container is filled by gravity and volume; any surplus product is diverted to the transfer conveyor. * The specified output rates may vary depending on the container and product types. Equipped with: * Filling vibrator * 4 speed variators in the control panel * Modular belt elevator. Dimensions: - Paddle height: 5 cm Pgsdpexp Rhzsfx Abbsn - Belt width: 40.5 cm - Paddle pitch: 20 cm - Discharge height: 1.65 m - Loading height: 62 cm * Production output may vary depending on the format and type of product being packed.

Condition: ready for operation (used), Can diameter range: 52 mm – 99 mm Can height range: 50 mm – 140 mm Pgedpfx Abeyyq D Hjbjn Number of pockets: 15 Capacity: up to 200 cans per minute

Condition: used, Can filler for beverages, manufacturer: KHS, model: 4 SVF 120 / D, for 80,000 cans/hour with 0.33 l cans for carbonated soft drinks, with can seamer, manufacturer: Angelus, model: 121 L (202), year of manufacture: 1991 Pgsdpfx Absyzhl Rjbon

Condition: new, Stainless steel filling container, tank, canister Article number: 10261 Safety filling container made of stainless steel, FM-approved, 19 liters volume - for safe dispensing of liquids - safety container made of stainless steel - flame arrestor screen in the filling opening - self-closing lid and overpressure valve - FM-approved - equipped with a self-closing tap 3/4" Application: Dispensing Length (external) (mm): 410 Width (external) (mm): 280 Height (external) (mm): 400 Diameter (external) (mm): 280 Pjdsd Dwtujpfx Abbjgn Weight (kg): 4.09 Volume (l): 19

Condition: good (used), Line was filling jars with chutneys and fruit sauces. Lovely condition. Pgjdpfx Ajtux H Ijbbon

Condition: used, Year of construction: 2020, Monoblock for rinsing, filling and capping glass bottles. 1. Rinser: Rinsing tower with 6 grippers for single-stage rinsing of empty bottles. 2. Filler: Filling tower with 6 electro-pneumatic backpressure valves. 3. Capping machine: Stainless steel cap container with cap conveyor and capping head 4. Bottle exterior washer Additional title: Counterpressure filler with 6 filling valves, sealer with one sealing head Capacity: 1100 bo/h referring to 0,33 l bottles Filling temperature: 2 °C Length: 2,20 m Width: 1,90 m Height: 2,10 m Pjdpfx Aew Tbgdsbbsgn Formats: Euro 0.5 l and 0.33 l; 26 mm crown caps Running direction: clockwise Operation / Control: Schneider Electric Base construction: Monobloc; Stainless steel housing on feet with plexiglass doors Features: Rinser with 6 grippers, filler with 6 filling valves, capper with one capping head, bottle exterior washer, beer pump, free bottle transport

Condition: used, Year of construction: 2020, Cold glue labelling machine for wrap-around labelling of glass bottles. The glue is applied to the bottle in horizontal strips. A roller affixes the labels to the bottle. Additional title: cold glue labeling Capacity up to: 6000 bo/h for cylindrical glass bottles Max. label length: 285 mm Formats: Euro 0.5 l and 0.33 l; wrap-around labels Operation / Control: control panel on machine side Pgsdpfew Ta Rhsx Abben Base construction: Stainless steel housing on feet with plexiglass doors Features: Label magazine, 2.5 m motorised bottle conveyor belt, pneumatic glue pump, control panel on the side of the machine

Condition: ready for operation (used), functionality: fully functional, outer diameter: 3,500 mm, usable tank capacity: 50,000 l, TECHNICAL DETAILS Number of silos: 2 Gross volume: 50 m³ Cylinder diameter: 3,500 mm Cylinder height: 5,000 mm Discharge diameter: 200 mm Podoy Hiuwopfx Abbogn Roof shape: Conical 15° Cone-shaped floor, apex angle: 60° EQUIPMENT Lifting lugs Hinged manhole, 600 mm diameter with safety grid Mount for pressure/vacuum relief DN80 PN10 nozzle for filling line Nozzle with blind flange Nozzle for overflow Nozzle for level switch

Condition: like new (used), Year of construction: 2014, Complete Bottle Filling Line for non-aseptic milk and other dairy product Capability 270, 540 ml PET/Plastic bottles with the cap D- 38 mm Bottle size: 270mm: D-60mm, H-132mm 540mm: D-70mm, H-180mm Capacity: 270mm: 2500 bottles per hour 540mm: 2000 bottles per hour Made by SELO, Netherlands. YOM 2014 Consisting of: 1. 2x Accumulation Tables 150 cm diameter Motorised 2. Rotary Bottle Washer 15 bottle capacity Siemens Logo TD touch screen With Associated Conveyor 3. Selo 6 Head Filling Machine 6 head fully automated filling station With Selo pressure tank Schneider touch screen control Pump and associated pipework 4. Capper Rotary 3 Head fully automated bottle capper with Mobile Cap Hopper/ Swan Neck cap Feeder 5. Albertina/Etipak In Line Labeller Pgedpfxeyiptqj Abbjn 6. Associated conveyors AS NEW CONDITION

Condition: good (used), functionality: fully functional, Lubeca LW792 filler and LW303 seamer Diameter range: 50 - 160 mm Height range: 65 - 300 mm Production capacity: up to 70 c.p.m. Pgodetqmwgopfx Abbon Tooling for approx.: 160 x 90 mm Lubeca LW792 can filler Lubeca LW303 can seamer

Condition: used, Automatic Bag Filling Line Bag weights from 5kg to 1000kg Infeed with product de-clumper / product breakup breaker and sieve. Pedsyq Tb Ijpfx Abbogn Incline screw auger to high level hopper and mixer. Delivery system to bag filler where weighing takes place and metal detection before bag filling point. This system comes with a second mobile screw auger for filling 1000kg big bag / sacks Complete with all the controls for the smooth running of this bagging line. After Bagging the bags are sealed with a Saxon Bag Sealer and then stitched with a Singer Bag Stitcher.

Condition: good (used), functionality: fully functional, Glass jar filling and closing line. 12 filling heads and 4 closing heads. Pgedpstqmvrsfx Abbjn

Condition: ready for operation (used), Can diameter range: 50 mm - 100 mm Can height range: 28mm - 120mm Capacity: up to 200 cans per minute Tooling for approx.: 73mm No. or seaming heads: 6 Pgedpswnriasfx Abben No. of filling pistons: 16 Single knive member separator Driven lifters Siemens touchscreen

Condition: excellent (used), ELOPAK SHIKOKU ASEPTIC FILLING LINE Model S-PS80HA YOM 2008 Working hours - 9,000 hours. Line capacity for 3 streams - 8100 pcs./h, for two 7100 pcs./h for one 6000 pcs./h Carton format: 500ml, 750ml, 1000ml The line includes: - Elopak filler S-PS80HA for Pure Pak classic packaging material - 3 units of PURE-PACK PLA-S30 cap applicators for Pure-Twist 2U cap Pgodpfxjxdbwij Abbon - WA-Flex-30 packer - Conveyor system. - Conveyor lubrication station. - Spare parts a total of 4,000 dollars.