Used Counter Bracket for sale (3,690)

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2010, operating hours: 21,713 h, machine/vehicle number: 007, laser power: 4,000 W, sheet thickness steel (max.): 12 mm, sheet thickness stainless steel (max.): 10 mm, sheet thickness aluminum (max.): 8 mm, travel distance X-axis: 2,520 mm, travel distance Y-axis: 1,550 mm, travel distance Z-axis: 300 mm, No minimum price – guaranteed sale to the highest bidder! The machine has been serviced annually (most recently in December 2025); service records are available. Ndedpfx Ajzrnhwslmea The Laser Turbo-Blower was replaced in 2021. The X-axis and Y-axis were renewed in 2023 after 27,066 operating hours. TECHNICAL DETAILS Travel range X-axis: 2,520 mm Travel range Y-axis: 1,550 mm Travel range Z-axis: 300 mm Travel range B-axis: 17 mm Cutting capacity, normal steel: max. 12 mm Cutting capacity, stainless steel: max. 10 mm Cutting capacity, aluminum: max. 8 mm Laser power: 4 kW Wavelength: 10.6 µm Laser beam diameter at the outlet of the laser resonator: 27 mm Cutting speed X-axis: 0 to 20 m/min Cutting speed Y-axis: 0 to 20 m/min Travel speed X-axis: max. 80 m/min Travel speed Y-axis: max. 80 m/min Travel speed Z-axis: max. 60 m/min Workpiece weight: max. 330 kg Material size: max. 1,500 × 5,000 mm Table height: 820 mm MACHINE DETAILS Control system: AMNC-F (FS-160I LPB) Minimum measuring unit: 0.001 mm Memory capacity: 10 MB Dimensions & Weight Machine dimensions (L × W × H): 5,745 × 2,630 × 2,151 mm Net weight: 7,700 kg Operating hours (according to counter) Operating hours: 34,401 h Runtime: 21,713 h Cutting time: 11,111 h EQUIPMENT Loading and unloading system Filtration system Manuals The seller can offer dismantling and loading of the machine for an additional fee. Within Germany, the seller can also offer an installation service at the new location.

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, Clamping length 2500 mm Clamping height 2200 mm 8 pcs. roller supports with clamping element and counter bearing Njdpjxdtrrsfx Almeda 4 pcs. pressure brackets for suspension with spindle locking Mobile version Equipped on both sides 1 pc. heating rail 60x60x2500 mm

Condition: good (used), Year of construction: 2019, functionality: fully functional, Design: Tabletop machine - Manual operation via 2-hand start - Ergonomic working with comfortable mushroom-shaped push buttons - Innovative emergency stop on the machine table - Emergency stop lighting visualizes machine status - Machine table 300 x 300 mm - Overhang (to the center of the sonotrode) 197 mm Model: FUSION CONSOLE P 1 Deflection-free machine stand - Patented brackets for maximum parallelism between the sonotrode and the workpiece - Ensures drive tracking for a stable process SERVO DRIVE 1 Fully electric servo drive - Height adjustment completely electric - Freely selectable start position for the shortest cycle time - High speed up to 240 mm/s - Stroke 300 mm with absolute position measurement POWER PACK P 1 High-precision force measurement with force sensor - Force 5 – 1000 N - Fast force control over the entire force range PROCESS MONITORING 1 Welding process control model FUSION - Industrial PC with 17.3" color touchscreen Njdpfozil I Aox Almsda - Welding types: distance relative, distance absolute, energy, time, power - Amplitude, force, or speed profiling with up to 5 steps - Comprehensive quality control with graphical display - Reliable monitoring of welding and process parameters - Easy setting of tolerance limits with setup assistant - Sequence setup for clear configuration of additional functions - 25 user levels with password protection - Productivity overview with piece and shift counters - Recipe management for up to 300 welding parts 1 UPS – uninterruptible power supply - Secure process documentation even in the event of a power outage 1 Standard control cabinet with electrical components and main switch - Dimensions approx. 450 x 600 x 300 mm PRODUCTIVITY 1 Vibrating tool holder, screwed - With indexing of the sonotrode alignment - Ergonomic holder made of aluminum - Easy replacement of the entire vibrating tool 1 Adjustment plate - Size 280 x 280 mm - Easy planar-parallel alignment of the workpiece to the sonotrode - Universal hole pattern for easy fixing of the fixture CONNECTIVITY 4.0 Comprehensive connection options and machine interfaces - Variable interfaces for up to 4 peripherals - USB & LAN connection for easy process data processing - Troubleshooting and assistance via remote service from MS Service Ultrasonic: 20 kHz with 1000 W 1 Digital ultrasonic generator soniGEN 20 /1000 - Frequency 20 kHz - Power 1000 W - Amplitude stabilization - Automatic sonotrode scan - Load compensation 1 Piezoelectric ultrasonic converter soniCON 20 kHz - Protection class IP54 - High-quality HF connector 1 Amplitude transformation piece soniAMP 20 kHz - Ratio 1:1 - Material: Titanium Please refer to the data sheet for technical specifications.

Condition: used, Year of construction: 2017, operating hours: 8,340 h, Beautiful machine - Well equipped - No play in the joints - No oil leaks! Ndodpfx Alsyqn Hlemsa VIN: VATZ1265CZB044737 Year of manufacture: 2017 Original operating hours: 8,350 hours Liebherr dealer maintained Special factory paint RAL 1027 curry yellow 4-cylinder inline engine, water-cooled with turbocharging, 103 hp Hydrostatic travel drive with 2 speed ranges – max. 32 km/h * Standard Z-bar linkage * Ride control / boom suspension * Hydraulic quick coupler with installation kit * Liebherr factory-installed central lubrication system * 3rd hydraulic control circuit for high-tip / grab bucket / or 4-in-1 bucket * Steel lamp brackets instead of plastic * Rear tow hitch * "Comfort" suspended driver’s seat * Comfort radio * 2 LED work lights at rear of cab roof * 2 LED work lights at front of cab roof * Adjustable steering column * Rotating beacon / warning strobe on the center of the cab roof * Crane / lashing eyes at rear and front frame * Fire extinguisher * Road approval 32 km/h Tires 17.5 x 25 L3, front axle: 2 tires, 95% tread, like new!! Tires 17.5 x 25 L3, rear axle: 2 tires, 95% tread, like new!!! Permissible total weight approx. 10,500 kg Operating weight approx. 8,500 kg Offer includes quick coupler and 1.6 cbm standard bucket – Price: €46,900 net (export), plus 19% VAT for domestic sales Optional attachments at additional cost: · Folding bucket 2 cubic meters from €3,550 · High-tip bucket · Screening / mixing bucket, manufacturer "Wolf" · 5-ton pallet fork from €2,190 Prices net plus VAT or for export Sale only to businesses or for export. Sale in as-is condition. No guarantee or warranty. The indicated operating hours or kilometer readings are taken from the hour or odometer counter; we do not guarantee their accuracy! Subject to prior sale. The vehicle description does not represent a binding offer and the details provided should not be regarded as warranted characteristics. The description and information serve only for general identification of the vehicle and do not constitute a legal warranty. Information is not guaranteed to be complete. Any details/descriptions and images are non-binding and do not represent assured properties. Only the stipulations in the order confirmation and invoice are binding. The seller assumes no liability or warranty. The advertisement may contain typing or data transmission errors. The seller has not inspected the machine. Equipment needs to be checked separately if necessary. We gladly accept your vehicle as a trade-in. For further questions, please contact us. For our international customers, we can prepare all customs and export documents for smooth transfer abroad.

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, Equipment: freezer, lighting, ISA PROFESSIONAL ice cream display case ice counter ice cream parlor ice cream refrigerated display case 24 types of ice. Different advertising in front - the model remains the same. Ice cream display case with air-cooled indoor unit for the presentation of 24 ice cream bowls 5 liters. Weight: 480kg Width / length ~ 218,3 cm Depth ~ 106,9 cm Height ~ 130,8 cm Plastic / metal bracket accessories Freight costs depend on the weight, volume and above all on the distance, the following information is relevant for inquiries: Delivery address (postcode and name of the town), but further details require a telephone call, so we ask you to inquire about transport costs and other delivery modalities to contact us by phone. Our contact details can be found under the legal information of the seller. Ndodey Tnc Topfx Almsa Payment in cash, possible upon delivery on site. Used machine - very good condition - checked and fully functional. We sell and export worldwide, due to our very large storage capacity we can also deliver larger quantities flexibly and quickly. Please contact us before purchasing. We issue intra-community invoices - excluding VAT. opening hours Mon-Fri: 8 a.m.-4 p.m. sat .: closed

Condition: ready for operation (used), Year of construction: 2008, operating hours: 10,294 h, functionality: fully functional, machine/vehicle number: P087WH855, travel distance X-axis: 700 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 300 mm, table load: 300 kg, spindle speed (max.): 10,000 rpm, TECHNICAL DETAILS Travel range X-axis: 700 mm Travel range Y-axis: 400 mm Travel range Z-axis: 330 mm Rapid traverse speed: 54 m/min Spindle speed: 100–10,000 rpm Distance spindle–baseplate: 250–580 mm Main spindle power: 5.5 kW Table area: 650 × 400 mm Table load: 300 kg Ndodozul Tcepfx Almoa Tool positions: 21 MACHINE DETAILS Dimensions & Weight Dimensions: 1,565 × 2,027 × 2,336 mm Machine weight: approx. 2,200 kg Operating hours: 10,294 h EQUIPMENT Central oil interval lubrication 100 mm column extension Interior lighting 16 additional I/O Rapid traverse with bell-shaped acceleration and deceleration Manual handwheel feed Directory display from memory card 1,000 storable programs Multilingual display Thermal compensation of the XYZ axes Parameter backup function Retraction cycle for tapping without a compensating chuck MANUAL GUIDE Background editing Extended part program editing Coordinate system selection G92 Workpiece coordinate system G52–G59 48 additional workpiece coordinate systems G54.1 Return to reference point G28 Quick Editor Setup file Production counter Tool correction memory C for D/H code and wear Threading without a compensating chuck M29 Subprogram call M98/M198/M99 Customer macro B G65, G66/G67 Drilling cycle G73, G74, G76, G81, G89/G80 Coordinate system rotation G68/G69 Circular interpolation with R programming AI Contour Control I G05.1 Helical interpolation Skip function G31 Multi-step skip G31 P1–P4 Verification of travel limit before movement Verification of stored travel limit 1 Verification of stored travel limit 2 G22/G23 Customer-specific PMC Real-time customer macro

Condition: ready for operation (used), Year of construction: 2022, spindle motor power: 10,500 W, spindle speed (max.): 10,000 rpm, overall weight: 2,400 kg, total width: 1,300 mm, total height: 1,720 mm, bar diameter (max.): 25 mm, controller manufacturer: FANUC, controller model: Series 0i-TF Plus, product length (max.): 2,166 mm, number of axes: 5, This 5-axis TORNOS Swiss DT 26 S was manufactured in 2022. It features a maximum bar capacity of 25.4 mm and a main spindle speed of 10,000 rpm. The machine includes a total tool capacity of up to 22 tools and live tool positions of up to 8. If you are looking to get high-quality turning capabilities, consider the TORNOS Swiss DT 26 S swiss type turning machine we have for sale. Contact us for further details. Ndedpfxjzl A Sds Almoa • Max bar capacity: 25.4 mm (up to 26 mm depending on collets) • Main spindle (Z1): 10,000 rpm; 8.2 kW nominal / 10.5 kW peak; 26 Nm; liquid-cooled • Counter-spindle (X4/Z4): 10,000 rpm; 1.5 kW nominal / 2.2 kW peak • Linear axes: 5 (X1, Y1, Z1, X4, Z4) • C-axes: 2 (C1 on main spindle, C4 on counter-spindle) • Operation mode: With or without guide bush (direct drive guide bush) • Total tool capacity: up to 22 tools • Live (driven) tool positions: up to 8 • Electrical connection: 400 V, 3-phase, 50/60 Hz • Installed power: 24 kVA • Nominal current: 35 A • Fuse rating: 50 A • Auxiliary voltage: 24 V DC • Control voltage: 220 V Additional equipment • Bar feeder: Tornos Robobar SBF 326 • Bar diameter range: 3–26 mm • Guidance: Hydrodynamic oil-filled guide channels • Interface: Delta HMI touch screen independent control panel • Quick change: Tool-less replacement of pusher and guide bushings • Chip conveyor: Ring Sun RSCW50 • Model: RSCW50; Serial: TA39614110 • Motor power: 0.2 kW • Operating voltage: 400 V, 50/60 Hz • Weight: 313 kg • YOM: 2022-06 • Mist extraction/filtration: Micronfilter Kube Series oil mist collector (mounted on top-left bracket system) Technical Specification Counter Spindle Yes

Condition: ready for operation (used), Year of construction: 2014, operating hours: 100 h, spindle speed (max.): 5,000 rpm, travel distance X-axis: 260 mm, travel distance Z-axis: 800 mm, total height: 1,800 mm, overall weight: 2,200 kg, controller manufacturer: FANUC, controller model: 31i B, number of axes: 3, This 3-axis EMCO MaxxTurn 65 SMY was manufactured in 2014, featuring a robust FANUC 31i B control system and a dual spindle setup with C and Y axes for complex machining. It includes a 12-position tool turret and a bar feeder with a capacity of 65 mm diameter and 3200 mm length. Ideal for precision turning and milling, this machine offers a comprehensive solution for advanced metalworking. Contact us for more information about this machine. Additional equipment • Automatic bar loading magazine with adjustable part length and bar diameter • Remnant extraction system • Guide channel made of polyurethane plastic • Displacement system for longitudinal movement Machine Benefits Qualitative Machine Benefits Ndedpfex D H Sfex Almja • No spindle reduction required Technical Machine Benefits • Cooling: thermocompensation system • Axes: c-axis and y-axis • System: linear guide system, digital drive system • CATCHING DEVICE Pneumatically operated precast catching device for the gentle unloading of precast elements. The precast elements are transported into a catching box (standard) or onto a conveyor belt (optional). Max. precast element length: 175 mm Max. precast element diameter: 65 mm Max. • Tool system: 12-position tool turret, vdi30 radial • Driven tools: up to 12 driven tools • Sub-spindle speed range: 0–7000 rpm • Bar length capacity: 1200 – 3200 mm • Diameter passage: 20 – 65 mm • Feed speed: 0 – 627 mm/sec • Turning length is 650mm Extra Information Control Unit Control: Integrated PLC Features: Fully automatic work cycle, Monitoring and error diagnostics (display output) Tools Max Power: 6.7 kW Max Torque: 25 Nm Speed Range: 0–5000 rpm C-Axis: Available Media Power Supply: 200/220/400 V AC Air Requirements: Min. 7 bar Air Consumption: 45 L/min Mount Position (Assembly) Installation Kit includes vibration-absorbing, height-adjustable leveling shoes, and mounting brackets. Machine History Note: Machine like new with only 100 hours of use Dimensions Machine Depth 4500 mm Technical Specification Counter Spindle Yes Driven Tools Yes

Year of construction: 2019, condition: used, functionality: fully functional, machine/vehicle number: 460923-80034645-001, This is an under-counter refrigeration unit from the manufacturer NordCap, which is perfectly suited for installation under existing cooking ranges or grill stations. The unit was manufactured by the premium manufacturer Ideal. The under-counter refrigeration unit features a built-in stainless steel evaporator and is equipped with 4 full-extension drawers. The usable height is 90 mm per drawer. Two identical units are available for sale. The unit has been inspected in our in-house workshop and is fully functional. The unit was only used for 6 months and was stored due to the business closure. Condition: very good (used). The list price is €5,500 net. You will receive an invoice with VAT shown. Our used equipment service for you: * 6 months warranty on all electrical parts, limited to the replacement of defective parts, excluding installation and removal costs * High-quality brand-name equipment at fair prices * Professional overhaul/inspection & expert cleaning * Inspected & fully functional - or money back * Shipping or self-collection can be flexibly selected * Competent advice - before and after purchase * Provision of operating instructions, connection diagrams & spare parts * Inspection according to DGUV V3 Technical data: * W x D x H: approx. 1380 x 660 x 410 mm * Power connection: V: 230 / kW: 0.265 * Serial number: 460923-80034645-001 * Year of manufacture: 2019 Condition: used, inspected, fully functional Shipping: * Delivery or self-collection by arrangement * Worldwide shipping on request * Shipping to islands or mountain stations only by arrangement Ndodpfjzu Sapex Almea Do you have any questions, would you like to receive advice or would you like to see something on site? You can reach us by telephone during our opening hours: Monday to Friday from 9:00 a.m. to 1:00 p.m. and from 2:00 p.m. to 5:00 p.m. Subject to changes and errors. The sale is exclusively subject to our general terms and conditions (GTC), which can be found under the link "Legal Information".

Year of construction: 2025, condition: new, functionality: fully functional, the Seamark XC1000 X-Ray Component Counter: Smarter, Faster, and Fully Automated Ndsdpfjyzpkzex Almea At Active-PCB Solutions, we know that accuracy, efficiency, and seamless integration are not optional, they’re an essential part of our manufacturing process. That’s why we’re excited to introduce our new Seamark XC1000 X-Ray Component Counter which has just been installed on our shop floor by Advanced Manufacturing Solutions Ltd. The next-generation offline X-ray component counting system is designed to redefine how we manage and verify our SMD component inventory. You can find out more about this new technology and how we intend to put it to full use below! Introducing the Seamark XC1000 X-Ray Component Counter Precision Counting Powered by AI Leveraging an advanced AI algorithm, this intelligent Seamark XC1000 X-Ray Component Counter system provides 99.99% counting accuracy for all SMD components sized 01005 and above, meaning we can say goodbye to manual errors and time-consuming reel unpacking. The XC1000 counts 1 to 4 reels simultaneously with no unspooling, no guesswork, and no downtime. Ergonomic Design Meets Automation The XC1000 features an ergonomically designed workstation where the operator can sit comfortably and monitor the easy-to-read counter screen. With an automated stage movement system and anti-pinch safety design, reel handling is simple, safe, and efficient. The unit is compact and mobile, thanks to built-in wheels for easy relocation. Smart Labeling and Real-Time Integration Mislabeling and manual input errors are inevitable and costly. However, with its error-proof labeling function, the XC1000 automatically detects and recognises each reel, instantly printing the correct label via a TSC industrial printer. This intelligent workflow is further enhanced by seamless real-time integration with MES, ERP, and WMS systems, enabling live data exchange and automatic result uploads. Built for the Modern SMT World The XC1000 is built to handle the full range of reel sizes (7”–15”), heights (5–80mm), and component types, including moisture-proof bag packaging, bulk materials, and JEDEC trays. Its amorphous silicon flat panel detector delivers sharp, high-resolution images with a 430mm × 430mm field of view, supported by four optional cameras for automatic barcode reading. Industry-Leading Database & Cloud Intelligence What sets the Seamark XC1000 X-Ray Component Counter apart is its dynamic, global X-ray component database, which includes: 15,000+ material profiles 60 million+ testing images 700,000+ core reference images Weekly updates with 160,000 new images Over 8.6 million classification training images This continually evolving database ensures compatibility with 99.2% of global components. Updates are cloud-synced monthly, keeping the whole system current and reliable. Key Technical Specs at a Glance Input Power: 220V, 10A, 50–60Hz Control System: Windows 10 64-bit X-Ray Source: Sealed microfocus (30–80KV, up to 1000 μA) Detector: 3072×3072 matrix, 139μm resolution Max Output Power: 56W Counting Speed: Fully automated, operator training not required.

Condition: used, mileage: 60,048 km, power: 294 kW (399.73 HP), first registration: 05/2010, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 06/2026, color: orange, gearing type: mechanical, emission class: euro5, Year of construction: 2010, Equipment: ABS, * Special equipment: * Wiedemann & Reichhardt BASIC 1000 Type 11.5-360 Vario superstructure, suction and jetting vehicle, former municipal service vehicle. * 3.0 m³ water / 8.0 m³ sludge, piston in front position * Vessel tube, lid, and base made of stainless steel * Stainless steel baffle plate mounted on sludge tank * Combination unit with telescopic piston, suction hose reel, high-pressure hose reel mounted on a boom with electronic pressure and speed control and display readout * ARCON radio remote control * High-pressure pump: Uraca Type P3-45-60 (Plunger 60 mm, 346 l/min, 205 bar drive power 130 kW, drive speed 1500 rpm), 3,421 operating hours * Vacuum pump: Wiedemann KW 2000 (2000 m³/h) with 4,395 operating hours (liquid ring pump) * Liquid ring pump - power consumption 50 kW, speed 1300 rpm * Liquid ring pump coupled with a pre-charge pump for temperature-dependent water circulation * Suction and high-pressure boom (swivel reel with 2 high-pressure hose reels, which can be operated individually, simultaneously, or synchronously) * Centrally mounted boom for optimal working range on both sides * - hydraulically swivels approx. 180° * - hydraulically telescopes approx. 1,200 mm * Hydraulic cable winch mounted on boom, lifting capacity 250 kg * Suction hose 25 m DN 125 * High-pressure hose reel 200 m DN 25 * Small high-pressure hose reel 80 m DN 13 * Length counter for high-pressure hose * Manhole above tank DN 500 * Hydraulic tilting tank approx. 1 m for maintenance and repair work * Hydraulic oil tank with 80 L capacity * 5 sight glasses on tank lid * Water filling on both sides with level indicator * BEKA-MAX centralized lubrication system for superstructure only, pump type troni X1, runtime 1.5 min or 20 cycles, pause time 4h * Accessories (various nozzles, suction hose DN 125, hose guides, spare parts (cardan shaft, valves, hoses)) * Handwash basin in the right front equipment cabinet, 20 L capacity, with swivel tap and fill unit * Boxes right and left at the rear, approx. 50 L, for storage of return pulleys, nozzles, etc. * Work floodlight (spotlight for shaft illumination), mounted on the boom, with 15 m cable and cable reel * Various work spotlights mounted on both sides of the superstructure * Rotating beacon on the boom and driver’s cab * Holder for manhole hooks at the rear incl. 2 hooks Ndodpfexvfxhjx Almja * 2 spring-tension cable reels * Large equipment cabinets mounted to the right and left of the water tank (illuminated), approx. 50 cm deep, aluminum doors opening upwards, gas struts with top locking * Wardrobe positioned over the high-pressure pump with lighting, ventilation slots, and water drain at the bottom * Extendable vice with bracket to the right * Rockinger SK 5 towing coupling * Front axle load 9.5 t * Raised exhaust pipe on right * Exterior mirrors electrically adjustable and heated * Wide-angle mirror with electric maneuvering assistance * Kerb mirror on the right, adjustable and heated * Rear axle differential lock * Air horns on driver's cab roof (2) * Cab: with 2 rear wall windows, tinted * Cab: with air suspension * Flame start system * Toggle brake (EVBec controlled) * Middle seat * PTO NMV 221, i=0.98 n=1470 rpm * Cab socket 12V and 24V * Control module for external data exchange * Additional high/low beam and fog lamps with cornering light * Further equipment: * Reversing camera * Turning camera * Axle configuration: 6x2/4 * Steered trailing axle * Wheelbase 3,600 mm + 1,350 mm * Frame over...

Condition: like new (used), functionality: fully functional, overall weight: 277 kg, total width: 650 mm, total length: 1,940 mm, total height: 1,050 mm, input voltage: 220 V, Plockmatic PBM 350, including the (SquareFold) BookFold Module and Trimmer Module. This booklet maker is in very good, like-new condition! This machine can be used in an offline setup as shown in the picture, or it can be connected to a Ricoh Pro 8100/8200 - C7100/C7200 - C9100/C9200 series machine. Counter readings: PBM 350: 20,775 BookFold Module: 13,403 Trimmer Module: 19,314 - Creates professional booklets in-line or offline with stapling and folding. - Capacity: up to 35 sheets of paper (80 gsm) for folded booklets of approximately 140 pages. - Supported paper sizes: width from approx. 206 mm to 320 mm, length up to approx. 457 mm. - Compatible with A and B formats and many custom formats. Are you looking for other options for the machine? We are flexible and can customize the machine to your requirements! Ndjdszpx Trspfx Almoa This machine has been inspected and thoroughly tested by our own specialized technical service department. If you would like further information, please do not hesitate to contact us. Worldwide shipping is possible.

Condition: like new (used), Year of construction: 2005, total height: 3,900 mm, total width: 1,700 mm, total length: 7,600 mm, type of input current: three-phase, overall weight: 4,000 kg, For Sale: Neat and in good condition: Brand: Affeldt Ndsdpfexztaqsx Almea type of conveyor: Affeldt E350 DG5 type of counter: Affeldt 275 8EV type of packaging machine: Affeldt 773 includes: conveyor belt + counting machine + vertical packaging machine Suitable for both PE and PP film. dimensions: (L x W x H) 7600 x 1700 x 3900 mm tube diameter: 180 mm weight approx. 4000 KG documentation and electrical diagrams available Year of manufacture: 2005 It has run very little and is complete. It is possible to inspect the machine at our location. If you have any questions or comments, please feel free to contact us. Kind regards, Leo Holland

Condition: ready for operation (used), Year of construction: 2016, number of axes: 6, This 6-axis CLOOS QRC 350 QIROX welding robot was manufactured in 2016. It features a maximum load capacity of 15 kg, a workstation reach of 3400 mm, and advanced V6 control. Equipped with a 450A Qineo Pulse A welding machine, it ensures precise and efficient welding. The robot includes a touch sensor and an arc sensor for enhanced accuracy during operations. Consider the opportunity to buy this CLOOS QRC 350 QIROX welding robot. Contact us for more information about this machine. Additional equipment • Premium control panel with wall bracket and cable holder • External gas cleaning device • Adjustable electro-pneumatic valve • Wire feed equipment Machine Benefits Technical Machine Benefits • Built-in welding interface and software • Protective tube for wire transfer • High usability with movable counter-side support • Workstation: 3400 mm • Longitudinal track travel speed: 1. 8 m/sec • Longitudinal track travel length: 7000 mm • Qineo touch sensor: 60 v • Arc sensor for welding path adjustment Njdpfx Asyaliislmsda Extra Information Includes standard height robot stool and computer connector for enhanced usability. Control Unit Control: V6 Advanced Digital inputs and outputs: 16 USB connectors: 2 Connectivity: Expandable up to 16 axes, CAN-Bus, serial interfaces

Condition: used, functionality: fully functional, machine/vehicle number: D435T02441M, Year of construction: 2014, operating hours: 3,179 h, load capacity: 1,600 kg, lifting height: 7,750 mm, free lift: 2,594 mm, fuel type: electric, mast type: triplex, construction height: 3,141 mm, fork carriage width: 700 mm, fork length: 1,150 mm, empty load weight: 3,162 kg, total length: 2,379 mm, drive type: Elektro, construction width: 1,265 mm, Reach Truck Chassis number: D435T02441M Load center: 600 mm Fork width: 120 mm Fork thickness: 35 mm ISO Class: ISO Class 2 = 1,000 - 2,500 kg Mast type: Triplex Transmission: Electronic transmission Condition: Ready for operation and fully functional Technical condition: Very good Front tires type: Vulkollan Front tires size: 343 x 140 Ndedpsyng Rksfx Almja Rear tires type: Vulkollan Rear tires size: 285 x 100 Battery voltage: 48V Battery capacity: 775Ah Battery manufacturer: Puls Description: MOSFET combination control, dead man switch, 360-degree steering, steering wheel with electronic control, joystick for hydraulic functions, selectable performance levels, drive wheel zero-positioning at start, automatic speed reduction when cornering, battery discharge indicator, fault diagnosis display, display with operating hours counter, drive direction and drive wheel position indicator, parking brake switch. Motor: Three-phase drive motor Power: 6.4 kW, drive motor power: 14.0 kW, lift motor Load backrest, side shifter, 3rd valve, 4th valve, load backrest, full free lift, Additional equipment: 4-way hydraulic lines, fabric seat, premium display, side battery removal, beacon light, universal mounting bracket, voltage converter, clipboard, document and cup holder, fork-mounted laser, lift height preselection.

Condition: new, Year of construction: 2026, functionality: fully functional, The StoNail 7000 is a fully automated portal nailing machine for the flexible production of pallets and crates, even with large workpiece dimensions. With up to three individually adjustable nailing head pairs, two work areas, and a generous Y-axis travel of 1,250 mm, it is designed for maximum efficiency and high flexibility. A 12-inch touch display, automatic height adjustment, and numerous expansion options support user-friendly operation. Offline programming allows new programs to be created and simulated outside the machine, reducing setup times and preventing downtime. The integrated automatic path optimization further increases the cycle output and ensures resource-efficient operation. Applications: Standard stringer and block pallets Special pallets & custom solutions Double-deck pallets & mixed pallets Transport frames & packaging elements Crate walls & wooden packaging Nailing bridge with rotary table: Robust frame construction with a tilt angle of 65° for ergonomic operation Machine length: approx. 7000 mm Rotary table with 2 work areas: Work area per side (L x H): 3000 x 1700 mm Cladding of the rotary table with plywood panels for custom templates Option: Clamping brackets for use with custom templates Option: Modular pallet clamping system for inserting loose boards and blocks Frequency-controlled nailing bridge: Up to three independently controlled nailing head pairs for complex nailing patterns Accommodation of up to 6 nailing heads Coverage of the entire work area with the nailing heads Collision monitoring: The movement of the feed cylinder is constantly monitored Nailing heads: Industrial nailing heads or hand-held devices Nail length max.: 130 mm Equipment of the nailing heads with Maxi-Coil magazines for up to 1000 nails Nailing shoes for limiting the insertion depth Option: Stapling devices, drilling heads Robot: Type: Kuka KR210 R3100-2 (Alternatively: similar manufacturer or refurbished robot possible) Nsdpfx Ajrallrjlmoda Gripper with clamping jaws for pallet removal and stacking Product weight max.: 80 kg Stacking height max.: 2800 mm Normal and interleaved stacking Option: Retrofitting the robot at a later date Buffer conveyor (Optional): For buffering several pallet stacks Fully enclosed by a robust plastic modular belt Programming: Simple, intuitive programming on the 12-inch touch panel directly on the machine. With the entered parameters, the pallets or crate parts are completely recorded or visualized. Programming of the removal and stacking process via robot is also done directly on the touch panel – no robot knowledge required by the customer. Siemens PLC control with control panel: Touch panel for operating the machine Pallet programming directly on the control panel Storage of the created pallet programs Pallet counter Nail counter: The machine stops as soon as the nails are used up Internet connection for remote maintenance Operating language available in German and English Option: Board width measurement for decreasing board widths Safety equipment: Safety fence around the entire system including access monitoring Emergency stop button on the outside of the machine and on the control panel Safety laser scanner to protect the rotary table Safety light curtain for pallet removal

Condition: used, functionality: fully functional, first registration: 11/2011, fuel type: diesel, color: orange, fuel: diesel, gearing type: automatic, suspension: steel, Year of construction: 2011, operating hours: 2,024 h, Equipment: air conditioning, all wheel drive, car registration, cruise control, differential lock, hydraulics, navigation system, trailer coupling, Holder C270 Drive system 4-cylinder, 4-stroke Kubota diesel engine, Type 2607, 49.2 kW / 67 hp in the C 270 Hydrostatic all-wheel drive via four wheels of equal size, Stepless speed selection with a total of four pre-selectable driving ranges Hydraulic wheel load compensation (combined independently and dependently) Mechanical differential lock, front and rear, can be switched on simultaneously electrohydraulically Hydraulic service brake and electric parking brake as a drum brake Suspended front and rear axles Cab including heating High roof Heat-insulating glazing and sliding windows on the sides Multifunction display (tachometer, operating hour counter, speed indicator, remote thermometer for engine and hydraulic oil, fuel level indicator) Mechanically adjustable steering column 3 storage compartments, sunshade film, interior cab light with door contact switch Hydraulics Multifunction arm console with driving program and differential lock switch Hydrostatic articulated steering with 2 double-acting steering cylinders Additional equipment Mounting frame for tool-free switching between platform and attachments Locking rail at the front for adjusting the upper link Electrical system: AC alternator 12 V / 90 A – 1080 W Battery 12 V / 88 Ah Battery disconnect switch Radio: wiring harness, antenna, speaker covers Lighting system according to StVZO (German Road Traffic Licensing Regulations) 7-pin socket at the rear Wiring prepared for rear marker light via Super-Seal plug Biodegradable hydraulic oil Stainless steel support pad Standard paint finish: orange RAL 2004 and gray RAL 7021 Front linkage Front linkage including safety hook, CAT II/CAT I with passive tilt adjustment Rotating beacon Locking bracket Hydraulic flow divider 1 Flow divider, circuit 1, adjustable from 0–25 l/min with line set to the front and rear Return line to the front and rear Hydraulic set, attachment control pump Attachment control pump, 0–80 l/min, variable Line set to the front and rear Return line to the front and rear Leakage oil line to the front and rear Hydraulic tipping device for implement arms Hydraulic set 2 3 double-acting control valves 2 with floating position 6 quick-release couplings 2 quick-release couplings at the rear, connected to the front via a T-piece with quick-release couplings Active hydraulic tilt adjustment 1 multifunction joystick for 5 double-acting functions including direction switch and speed control Comfort package Driver's seat with air suspension, armrest, air conditioning Hydraulic tipping device for cab Rear view camera Ndsdpfjzdkc Uox Almoa 2 work lights at the rear Ball head, permanently mounted 1 NEW DIESEL ENGINE KUBOTA WITH 12 MONTHS FACTORY WARRANTY!!! In addition, the following options are available at an extra charge: 1. PRICE INCREASE PLATFORM, DEMO UNIT Platform 1250 x 1060 x 300 mm (can be retrofitted at any time) – currently installed €2,750 plus VAT 2. PRICE INCREASE TOWING HITCH, NOT SELF-ADJUSTING, HEIGHT ADJUSTABLE, DEMO UNIT €470 plus VAT 3. PRICE INCREASE Retrofitting manual central lubrication system €1,600 plus VAT 4. PRICE INCREASE HYDRAULIC REAR PTO €1,990 plus VAT Subject to change, typing errors, mistakes and prior sale. All information is provided without guarantee. The sale is made with the exclusion of any guarantee or warranty.

Condition: new, Bernardo Gluing Press HVS 3000 The HVS 3000 gluing rack stands out for its universal application, as well as its easy and quick operation, making it indispensable for daily use in workshops and carpentries. Technical Specifications Ndedpfxoxrnu Ds Almja Working length: 2800 mm Working height: 1460 mm Cylinder stroke: 65 mm Pressing force: 2500 kg Vertical hole pitch: 50 mm Total length: 3000 mm Total height: 2070 mm Frame depth: 925 mm Weight: approx. 198 kg Features • Suitable for a wide range of applications such as solid wood gluing, door manufacturing, edge banding, etc. • Robust gluing press with solid steel construction • Faster and more efficient bonding compared to screw clamps • Supplied as standard with 4 adjustable pressure beams and 1 pressure bracket • No tilting of pressure cylinders due to double spring-mounted guide Scope of delivery • 4 movable pressure beams, each with a vertical hand hydraulic cylinder and counter support • 1 movable, adjustable pressure bracket

Condition: new, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 13,820 mm, loading space width: 2,480 mm, total width: 2,550 mm, total height: 3,284 mm, Year of construction: 2026, Equipment: ABS, Vehicle information ? Loading space length: 13,820 mm ? Height: 3,284 mm ? Width: 2,550 mm ? Loading space length (inside): 13,620 mm ? Loading space width (inside): 2,480 mm ? Fifth wheel height: 1,150 mm ? Permissible total weight: 36,000 kg ? Empty weight: 6,530 kg ? Container locks for the following containers: - 1 x 40', 2 x 20' and 1 x 20' in the middle up to 25 ton _____ Axles ? Krone axles with disc brakes ? 1st axle lift axle ? Air suspension ? Wheel chocks ? Axle cap KM counter ? Tire brand: According to manufacturer's choice: 385/65 R22.5 ? KRONE TPMS control unit ? EBS ? Steel rims ? KRONE, air-sprung unit + self-steering axle _____ Structure / attachments ? Mechanical supports ? Steel bulkhead with stable corner stanchions, 2,000 mm high ? Internal bulkhead reinforcement with 9 mm thick ? 2 warning signs ? 2 sets of over-width signs including outline light ? Pallet storage box, closed, for 24 Euro pallets ? Stanchion depot on the left and right sides for 6 insert stanchions ? Forklift bracket ? Folded underrun protection ? KRONE Telematics KSC ProPlus Dry 2 ? Max. 7,000 kg forklift axle load ? 30 mm thick waterproof plate floor _____ Lighting / electrics Nedpfov E Tpdsx Almsda ? LED side marker lights with direction indicator ? Rotating beacon (orange) including rod holder ? Multifunctional rear lights (full LED), Hella (Gen.2) ? 2x LED license plate lights _____ Paint finish ? Chassis: jet black - RAL 9005 ? Axle hub: jet black - RAL 9005 ? Front wall: light grey - RAL 7035 ? Rims: silver natural

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, For Sale — Buhrs B5000 Paperwrapper (2015) — Only 11,055,783 cycles, up to 24,000 pph Model: Buhrs B5000 paper wrapping / mailing system Year: 2015 Total cycles: 11,055,783 (low usage — counter photo attached) Rated speed: up to 24,000 packages per hour Condition: Very good and fully operational; clean mechanics and controls; maintained on schedule Location: USA Ndsdpsxdn Nrofx Almsa Included: Complete integrated system : Rotary feeder, automatic product loader/conveyor for rotary feeder products, gathering section, PPU ( product positioning unit ) wrapping section, eject station, product discharge conveyor, Buhrs data controller, Domino k600i inkjet, Nordson Blue 7 glue system with 2 heads and 2 hoses, manuals. Additional feeders/conveyors can be discussed during inspection. Inspection: Available under power by appointment; video test available on request. Logistics: Professional dismantling/packing and worldwide shipping can be arranged. Shipping is extra — within the US estimated at USD 2,000; to a major European port estimated at USD 3,000 (final quote depends on destination). Terms: EXW USA by default. Bank wire; 100% prior to loading into a truck or sea container. Location: Wisconsin, USA Availability: Immediately Ownership: Direct sale from Himin Industries Inc., not brokered Asking price: €139,000 — ONO — price without VAT (export sale) Export sale from USA – no VAT charged by the seller. Local VAT and import duties, if any, are payable by the buyer in his country. Machine was used in a clean and climate-controlled environment and is in excellent mechanical and optical condition. We can assist with international shipping, crating, and export documentation. Video and inspection available upon request. Direct sale by owner. No brokers. Serious inquiries only.

Condition: used, Year of construction: 2021, This is the main drive of a Power+Free conveyor system CSF, the machine is still unused in its original packaging. Assembly: PFC47-N, longitudinal dimension of upper section: 1,440mm, end distance left: 55mm, end distance right: 55mm, vertical dimension to drive/guide level: 313mm, additional vertical dimension: 213mm, vertical dimension below the centerline: 160mm, distance between the shown guide/suspension points: 420mm, additional vertical dimension in front view: 160mm, overall dimension in plan view: 1,500mm, internal/usable length in plan view: 1,400mm, edge distance left/right: 25/25mm, distance between two drive/running gear points: 240mm, lateral partial dimension: 240mm, suspension hole diameter: 14mm, total length of substructure, side view: 1,640mm, overall width: 820mm, with documentation. An on-site inspection is possible, machine not powered. Nedpfxjzvghdj Almeda

Condition: new, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 13,620 mm, loading space width: 2,480 mm, loading space height: 3,000 mm, total width: 2,550 mm, Year of construction: 2026, Equipment: ABS, Krone SDP 27 Mega Curtainsider Trailer * Multilock outer frame * Krone axles with air suspension and disc brakes * Air suspension with lifting and lowering system * Fully automatic electronic lifting axle control for the first axle, depending on the load * Axle cap mileage counter * 6 tires (435/50 R 19.5) * Spare tire holder Ndedsvw Hkxopfx Almsa * Knorr brake system * Multifunctional rear lights (full LED) * 2 additional LED reversing lights * 1 plastic toolbox * 30 mm thick, waterproof slab floor * Hydraulic lifting roof with 500 mm total lift * 3 pairs of KRONE center stanchions * Load securing certificate according to Daimler Directive 9.5 * Load securing certificate for beverage transport (VDI * 2700 Sheet 12) * Load securing certificate according to EN 12642 Code XL * Chassis including outer frame RAL 9005 DEEP BLACK * Axles including wheel hubs RAL 9005 DEEP BLACK * Attachments BLACK OR GALVANIZED * Rims SILVER NATURAL * Side impact protection WHITE POWDER-COATED * Underride protection WHITE POWDER-COATED * Lighting bracket WHITE POWDER-COATED * Center stanchions (sliding curtain) KTL-primed * Body (front wall, rear portal, rear wall) RAL 7035 LIGHT GREY * Landing gear RAL 9005 DEEP BLACK * Tarpaulin color RAL 9006 WHITE ALUMINUM Sample photos We are happy to provide you with further information.

Condition: used, mileage: 179,000 km, power: 107 kW (145.48 HP), first registration: 01/2016, fuel type: diesel, overall weight: 5,200 kg, color: white, gearing type: mechanical, emission class: euro5, number of seats: 2, loading space length: 5,200 mm, loading space width: 2,130 mm, loading space height: 2,050 mm, Equipment: ABS, central locking, electronic stability program (ESP), soot filter, Special equipment: Trailer socket preparation, Audio system: radio with CD player, MP3 compatible, USB and Bluetooth hands-free system, Body manufacturer interface, Exterior mirrors electrically adjustable and heated, Long exterior mirrors, for vehicle width 2350 mm, Generator 180 A, Fire extinguisher bracket, Fuel tank: 90 liters, Acoustic reversing warning (external warning system), Seats in the cab: passenger single seat, Seats in the cab: driver's comfort seat (hydraulic), Additional equipment: Driver's side airbag, Anti-slip regulation (ASR), Design: C-series, Brake assist, Electronic brake force distribution, Digital tachograph, Rear axle suspension: trapezoidal, Windshield and side windows tinted, Body/superstructure: sales body, Headlight range adjustment, Engine 3.0 L - 107 kW Diesel, Radio preparation with speakers, Wheelbase 4350 mm, Spare wheel in driving condition, Spare wheel holder between floor longitudinal member, Low emissions according to Euro 5 emission standard, Permissible total weight 5.20 t, payload 925 KG 1 SIPHON UNDER RESERVE AND 2 UNDER THE display case // LIFTING STRAP LONG 4640 MM ? WIDTH 1090 MM SUPPORTED BY GAS SPRING AND ELECTRO-CYLINDER + LONG FOLDING STRAP .4640 MM - WIDTH 300 MM // COUNTER LENGTH 1700 OF THE DISPLAY CASES // COOLING GLASS COLUMN LENGTH 1000 X WIDTH 900 MM POWERED BY THE GROUP AND FAN // 1/2 HP COMPRESSOR HOUSED IN THE CELL // EUTECTIC PLATES 1 GREEN BLOCK IN THE COOLING COLUMN // EUTECTIC PLATE 1 GREEN BLOCK IN THE HIGH RESERVE 2 IN L IN THE COOLING DISPLAY CASE 1 BLOCK IN THE LOWER RESERVE // AUTOMATIC DEFROSTING + TIMER // TEMPERATURE DISPLAY Quantity: 3 FOR DISPLAY, LOW AND HIGH RESERVE // 220-V CONNECTION FOR THE SCALE // 24-V SOCKET FOR THE SLICER //12V/24V CONVERTER //BATTERIES LITHIUM BATTERY PACK WITH CHARGER //12V/220V PURE SINE CONVERTER The vehicle is in good condition!! Nsdpfszvwx Hjx Almsda MOT and emissions test renewed for an extra charge Financing possible via Santander Bank

Condition: new, functionality: fully functional, power: 367.75 kW (500.00 HP), fuel type: diesel, axle configuration: 8x4, wheelbase: 4,250 mm, fuel: diesel, color: white, gearing type: automatic, emission class: euro6, Equipment: ABS, Iveco T-Way 500 Configuration: CIFA RY 1300 ADVANCE Concrete Mixer • 25x8 mm wear protection Spirals • Two manholes • 250 mm diameter rotation rollers with rocker supports • Central reducer • Water tank, capacity 1200 liters | + 80-liter oil tank • Water counter o Quick water couplings on both sides • Concrete consistency pressure gauge • Dual electro-hydraulic controls (one control panel in the truck cab, and one removable rear panel, with 3 m cable) • Two additional chute segments, with mounting brackets on subframe • Overlapping spirals, four starts at discharge point • Wear plates on loading hopper and discharge chute • Unit completely shot-blasted and protected with anti-corrosion primer • Water pump and chute-lift cylinder, hydraulically operated via distributor • Heat exchanger • Homologated folding underrun protection bar Ndsdpev Apf Nsfx Almoa • Emergency Start/Stop buttons for vehicle engine Options: • 2 additional chute segments > EKOS CAP - POSSIBLE IN-HOUSE TAILORED FINANCING OR LEASING AVAILABLE. TERMS FROM 24 UP TO A MAXIMUM OF 96 INSTALLMENTS ZERO DOWN PAYMENT PHONE: -0823 1686306 -335 6713062 OFFICE OPENING HOURS: MONDAY-FRIDAY 8:30am–7:00pm SATURDAY 8:30am–2:00pm WE OFFER A WIDE SELECTION OF USED MULTI-BRAND COMMERCIAL/INDUSTRIAL VEHICLES (FIAT-HYUNDAI-DAF-MERCEDES BENZ-RENAULT-PEUGEOT-IVECO-MITSUBISHI-SCANIA S-WAY -5500-V8-650-580-730-s500-S 500-S500Stralis-MAN-NISSAN v8-Intarder-770s-limited edition-660 S semi-trailer-refrigerated semi-trailer tipper - Lamberet-Schmitz ISUZU-FLATBED-CRANE-TIPPER-CURTAIN SIDE-BOX TAIL-LIFT-REFRIGERATED CELL-INSULATED WITH FRIDGE - VAN)

Year of construction: 2020, condition: ready for operation (used), A large-format CNC twin-spindle vertical turning machine WMZ is available. Travel X1/X2: 2950mm/2650mm, travel X: 5600mm, travel Z1/Z2: 3200mm/2830mm, feed rate X: 32m/min, feed rate Z: 20m/min, max. workpiece diameter: 3800mm, max. swing in working area: 4000mm, min. workpiece diameter 4-axis internal machining/external machining: 1250mm/1500mm, min. workpiece diameter 2-axis internal machining: 450mm. Table speed: 100rpm, tool stations: 2x47, tool interface: Capto C8, max. tool diameter: 120mm, max. tool length: 400mm, max. tool weight: 20kg, spindle power: 240kW/202kW. Machine dimensions X/Y/Z: approx. 15600mm/10350mm/5750mm, control: Siemens Sinumerik 840D sl. Documentation available. An on-site inspection is possible. Ndodpfx Alezgwylsmja