Used CNC lathes up to 199mm turning diameter for sale (318)

Condition: excellent (used), Year of construction: 2000, INDEX ABC CNC Lathe. Mfd. 2000 Control: Siemens 840C Capacity 65mm Ran oil Still in production, running nylon With 12-ft Bar Feed (pictured) Chip Conveyor Comes the a good amount of tooling Control Type: Siemens SINUMERIK 840C Spindle Speed (max.): 6,000 RPM Power Requirements (V/Hz/PH): 400/60/3 Itslhcow Td U Rocqljg Main Spindle Speed (max.): 6,000 RPM Bar Capacity: 65 mm Power: 20 kW (at 100%) Power: 27 kW (at 40%) Synchronous Spindle Speed (max.): 4,500 RPM Power (max.): 4.2 kW Capacity Tool Carrier 1: 8 (7 + synchronous spindle) Tool Carrier 2: 6 Dimensions Bar Feeder: L 150" x W 27" x H 52" Turning Center: L 80" x W 48" x H 65" Power Enclosure: L 52" x W 18" x H 70" Chip Conveyor: L 88" x W 48" x H 35"

Condition: used, Year of construction: 2013, turning diameter max. 20 mm turning length max. 80 mm control Fanuc 310is Main spindle: max. usable bar diameter 20 (25) mm inner draw tube diameter 28,5 mm Max. speed main spindle 10.000 min/-1 power capacity - main spindel 3,7 kW max. Torque 9,4 Nm C-Axis C1: 360 ° Subspindle: inner draw tube diameter 28,5 mm Max. speed main spindle 10.000 min/-1 power capacity - main spindel 3,7 kW max. Torque 9,4 Nm C-Axis C2: 360 ° axis stroke: x-axis 1: 50 / 2: 240 mm y-axis 1: 350 / 2: 120 mm z-axis 1: 80 / 2: 300 mm Linear tool panel carrier for slide 1: number of toolpositions 17 pos. inner processing 6 pos. outer processing 6 pos. driven statition 5 pos. Shank diameter 20 mm shaft cross cut 12 x 12 mm collet diameter ESX / ER 16 tool spindle speed range 3x 3.450 / 2x 6.000 min/-1 power capacity - driven tool-stations 5x 0.98 kW max. Torque 3x 4 / 2x 2,3 Nm Linear tool panel carrier for slide 2: number of toolpositions 13 pos. inner processing 4 outer processing 4 driven statition 5 pos Shank diameter 20 mm shaft cross cut 12 x 12 collet diameter ESX / ER 16 tool spindle speed range 3x 3.450 / 2x 6.000 min/-1 power capacity - driven tool-stations 5x 0,98 kW max. Torque 3x 4 / 2x 2,3 Nm feeds: rapid traverse ( X / Y / Z ) max. 40 m/min feed power max. 2,5 kN Accelaration max. 5 m/s² total power requirement 56 kVA weight of the machine ca. 4,8 t dimensions of the machine ca. 8,0 x 2,5 x 2,0 m CNC-Short-Lathe GILDEMEISTER - Sprint 20-8 - 8 Achsen ( 2x X / 2x Y / 2x Z / 2x C ) Itelhjtqmnnoccqljg - Main- and Subspindle - Bar-Feeding-Magazine FMB turbo 3-36/ 3200A - Coolant System DELTATHERM

Condition: ready for operation (used), Year of construction: 2017, operating hours: 18,955 h, spindle speed (max.): 4,500 rpm, travel distance X-axis: 203 mm, travel distance Y-axis: 82 mm, travel distance Z-axis: 585 mm, spindle motor power: 15,000 W, total height: 1,852 mm, total width: 1,935 mm, overall weight: 6,000 kg, bar diameter (max.): 65 mm, controller manufacturer: FANUC, controller model: 0i-TF, product length (max.): 2,716 mm, number of slots in tool magazine: 12, number of axes: 4, This 4-axis NAKAMURA-TOME AS-200L was manufactured in 2017. It features a maximum turning diameter of 320 mm and a turning length of 570 mm. The machine includes a 12-station turret and a main spindle speed of up to 4500 rpm. If you are looking to get high-quality turning capabilities, consider the NAKAMURA-TOME AS-200L horizontal turning machine we have for sale. Contact us for further details. Standard Equipment • Turret: 12-station drum turret • CNC control, 4 axes (including C-axis), Fanuc 0i-TF • Anti-collision protection system (mechanical “Airbag”) • Y-axis • 15″ LCD monitor with USB port • Live tooling – 12 positions • Automatic central lubrication system • Machine working area lighting • Coolant pump – 180 W • Initial coolant filling (Blaser coolant)Options included • Transformer • Luck-Beil II (NT Manual Guide – graphical interface for control) • Increased spindle bore to 71 mm (4500 rpm; A2-6) • Upgraded main spindle motor Fanuc 15 / 11 kW (258 Nm) • High-pressure coolant system with Brinkmann pump • Shut-off valve for high-pressure coolant system • Low coolant level sensor • Part ejector cylinder from sub-spindle (cylinder stroke 100 mm) • Signal tower for machine status (3 colors) • Operator shelf under control panel • Type A parts catcher (Ø71 mm / L150 mm / 3 kg) • Preparation for LNS bar feeder • Air blow through main and sub spindle • Manual tool probe (Renishaw, one arm for both spindles) • Spindle cooling system for main and sub spindle • Preparation for oil mist extraction system Technical Specification Counter Spindle Yes Driven Tools Yes Itolhjytqpnoccqleg

Condition: used, Year of construction: 1982, turning length / mm Itslhjy S Dxnsccqleg turning diameter / mm centre height / mm control / Very good condition CNC lathe WEISSER Heilbronn, type Gigant. From precision operation, precision machining only. Type Gigant Machine no. 27 Year of manufacture 1982 Hydraulically self-clamping Forkart chuck with power clamping cylinder 4-fold Sauter turret, size 400 mm2 Siemens SINUMERIK 840D fully functional Commissioning Traverse paths X 725 mm (stroke), Z 1,480 mm Main spindle drive direct current 45 kW (rated power) Speeds in 3 stages up to max. 1,120 rpm One set of base jaws inside/outside without lynette (but can be provided for customisation) incl. documentation

Condition: used, Year of construction: 1996, swing diameter 530 mm turning diameter 150 mm spindle passage 65 mm control SIEMENS 840 C travel x1 175 mm travel y1 +/- 70 mm travel z1 433 mm travel x2 175 mm travel y2 +/- 70 mm travel z2 433 mm spindle turning speed range 38 - 4000 U/min C-axis 2 x tool turret 2 x 12 Pos. number of driven tool stations 2 x 12 tool shaft (cylinder shaft DIN 69880) VDI 30 total power requirement 33 kW dimensions of machine L x W x H 3,95 x 2,49 x 2,6 m Iteljvh Nbnehccqlog Accessories: collet fixtures on main spindle and sub spindle, one collet for main spindle and one for sub spindle, various tool holders (for driven tools as well), various spindle reductions, chip conveyor, coolant

Condition: ready for operation (used), Year of construction: 2023, spindle speed (max.): 4,500 rpm, travel distance X-axis: 210 mm, travel distance Z-axis: 560 mm, spindle motor power: 18,500 W, total height: 1,920 mm, total width: 1,560 mm, overall weight: 4,000 kg, controller manufacturer: FANUC, controller model: 0i-TF PLUS, product length (max.): 2,643 mm, number of axes: 3, This 3-axis SMEC SL2000M (B TYPE) was manufactured in 2023. It features a maximum turning diameter over bed of 510 mm and a turning length of 540 mm. The machine is equipped with a hydraulic 3-jaw chuck and a spindle speed of up to 4,500 rpm. If you are looking to get high-quality turning capabilities, consider the SMEC SL2000M (B TYPE) horizontal turning machine we have for sale. Contact us for further details. • Type/Configuration: CNC turning center with C-axis and live tooling; 12-station turret (24 positions); programmable tailstock; no sub-spindle • Capacity: • Max turning diameter over bed: 510 mm • Max turning diameter over/on carriage: 360 mm • Max turning length: 540 mm • Bar capacity: 68 mm • Spindle: • Nose: A2-6" • Hydraulic chuck size: 200 mm • C-axis: continuous • Axes/Travels: • Axis motor power (X/Z): 1.8 / 3.0 kW • Guide inclination: 45° • Rapid traverse and ballscrews: • X rapid: 24 m/min; ballscrew Ø28 mm • Z rapid: 30 m/min; ballscrew Ø40 mm • Turret/Tooling: • Stations: 12 (24 positions) • Interface: BMT55 • Driven tool power: 3.7 / 5.5 kW • Driven tool speed: 5,000 rpm • Indexing time: 0.15 s • External tool size: 25 × 25 mm • Internal tool size: Ø40 mm • Tailstock: • Taper: CM4 • Body travel: 450 mm • Quill Ø: 75 mm; travel: 80 mm • Thrust: 5,047 Nm • Coolant system: • Tank capacity: 185 L • Pump power: 0.5 kW • Flow: 20 L/min • Pressure: 5 bar Itjlhjyvqndjccqlog • Electrical: • Power requirement: 31 kVA • Voltage: 380 V ±10%, 3-phase • CNC/Control: • Fanuc 0i-TF PLUS, axes: X, Z, C • Display: 10.4" LCD • Interfaces: USB, Ethernet, RS232 • Functions: rigid tapping Additional equipment • Hydraulic 3-jaw chuck Ø200 mm • Chip conveyor • Tool presetter • Tool holder set: • 2 axial driven tools • 2 radial driven tools • 1 tilting driven tool ER16 • Industry 4.0 package: • CNC data monitoring capability • Remote monitoring via FOCAS libraries • Production data interface • Also included: automatic lubrication system, coolant system, work lamp, electrical cabinet with heat exchanger Technical Specification Counter Spindle No Driven Tools Yes

Condition: like new (used), Year of construction: 2013, functionality: fully functional, Weiler Praktikant VCD Precision Lathe Manufacturer: Weiler Model: Praktikant VCD Precision Lathe Year of manufacture: 2013 Condition: used, very good, as-new condition, no signs of wear, incl. new servicing and measurement protocol prior to sale Centre distance: 650 mm Centre height: 160 mm Swing diameter over bed: 320 mm Swing diameter over cross slide: 190 mm Cross slide travel: 150 mm Top slide travel: 110 mm Top slide swivel range: +/-65° Bed slide guide length: 350 mm Bed width: 205 mm Turning tool cross-section (height x width): 20 x 20 mm Height from top slide to centre: 30 mm Spindle nose according to ISO DIN 702-3 (DIN55027) size 5 Spindle diameter at front bearing: 70 mm Itslhccoy Ti Sioqlog Spindle bore: 43 mm Main spindle taper metric 50 Drive power: 6 kW Speed range: 30 – 4000 rpm Number of gear stages: 1 Number of speed ranges: stepless Number of feeds: 24 Longitudinal feed: 0.02 – 0.63 mm/rev Facing feed: 0.006 – 0.2 mm/rev Quill diameter: 40 mm Quill travel: 85 mm Quill taper: 3 Morse taper Weight, without packing and accessories, approx. 1150 kg Length / Width / Height, net: 1720 x 890 x 1700 mm Headstock / rear wall / sliding safety cover: Light grey RAL 7035 Machine base / machine bed: Basalt grey RAL 7012 Screen display housing: Blue NCSS 4550-R80B

Condition: like new (used), Year of construction: 2021, functionality: fully functional, Weiler Praktikant VCD Precision Lathe (2021) Manufacturer: Weiler Model: Praktikant VCD Precision Lathe Year of manufacture: 2021 Condition: Used, excellent, like new, incl. new maintenance and measurement protocol prior to sale Centre distance: 650 mm Centre height: 160 mm Swing over bed: 320 mm Swing over cross slide: 190 mm Cross slide travel: 150 mm Ijloy Ti Nuohccqletg Top slide travel: 110 mm Top slide swivel range: +/-65° Bed saddle guideway length: 350 mm Bed width: 205 mm Tool shank cross-section (H x W): 20 x 20 mm Height from top slide to turning centre: 30 mm Spindle head according to ISO DIN 702-3 (DIN55027) size 5 Spindle diameter in front bearing: 70 mm Spindle bore: 43 mm Main spindle taper metric 50 Drive power: 6 kW Speed range: 30 – 4,000 rpm Number of gear stages: 1 Number of speeds: stepless Number of feeds: 24 Longitudinal feed: 0.02 – 0.63 mm/rev Facing feed: 0.006 – 0.2 mm/rev Quill diameter: 40 mm Quill stroke: 85 mm Quill taper: 3 Morse taper Weight, without packaging and accessories: approx. 1,150 kg Dimensions (L x W x H), net: 1,720 x 890 x 1,700 mm Headstock / Rear cover / Sliding guard: Light grey RAL 7035 Machine base / Machine bed: Basalt grey RAL 7012 Display housing: Blue NCSS 4550-R80B

Condition: ready for operation (used), Year of construction: 2015, operating hours: 2,322 h, spindle speed (max.): 4,500 rpm, travel distance X-axis: 235 mm, travel distance Z-axis: 1,144 mm, overall weight: 6,300 kg, controller manufacturer: OKUMA, controller model: OSP-P300L, number of axes: 3, This 3-axis Okuma Genos L300E-M was manufactured in 2015. It features a maximum turning diameter of approximately 300 mm and a distance between centers of 1060 mm. The machine is equipped with live tooling and C-axis capabilities, enhancing its versatility for various turning applications. If you are looking to get high-quality turning capabilities, consider the Okuma Genos L300E-M machine we have for sale. Contact us for further details. Ielhey S Sh Rjccqljtg • Control: OSP-P300L • Main Spindle: Yes • Live Tooling: Yes • C-Axis: Yes • Y-Axis: No • Maximum Turning Diameter: approx. 300 mm • Distance Between Centers: 1060 mm • Coolant Through Live Tools • Supply Voltage: 400 V • Phase: 3 Phase • Frequency: 50/60 Hz • Rated Capacity: 22.4 kVA • Full Load Current: 33.5 A • Largest Motor Rating: 89 A • Short Circuit Rating: 2.5 kA • Chip Conveyor: Yes • Oil Mist Extractor: Yes • Optional: possible accessories, including driven tools (5 pcs.), all jaws, holders • Spindle Runtime: 2322 h Technical Specification Counter Spindle No Driven Tools Yes

Condition: good (used), Year of construction: 1994, functionality: fully functional, Control system for Traub TX8F, Turret, Tailstock, Chuck jaws, Chip conveyor, Manuals. Itelhcoy S Rrnecqlsg

Condition: reconditioned (used), Year of construction: 2009, MAZAK QUICK TURN NEXUS 100-II MSY Max. machining diameter: 280 mm Max. machining length: 400 mm Max. milling speed: 4,500 rpm Max. spindle speed: 6,000 rpm Max. bar diameter: 42 mm Machine is equipped with: - CNC control: Mazatrol Matrix Itolhccey S A Risqleg - SMW collet chuck 173E for main spindle - KITAGAWA 3-jaw chuck B-205 for 2nd spindle - Tool Eye - C-axis - C-axis counter-spindle, input accuracy 0.0001 - Y-axis - Interface for bar loader magazine - Automatic parts catcher - Reinforced coolant pump - 8 pcs. fixed tool holders - 2 pcs. driven tool holders

Condition: excellent (used), INDEX ABC 65 is an INDEX CNC Turning‑Milling‑Drilling Center designed for high precision, accuracy and reliability. Capacity: 2 turning spindles, 2 turrets; spindle bore 65 mm; spindle diameters 140/110 mm; travels Z300 X140 Y100 mm; turret positions 10/9 (back 8). Specs: main spindle stepless 0–6000 rpm, 25/35 kW, torque 80/120 Nm; back spindle 6000 rpm, 5/9 kW; driven tools 7.5/9 kW; tool shank 45 mm; indexing 0.4 s; rapids X30/Z50 m/min; power supply 3x400 V 50 Hz; installed power 41 kW; weight ~6500 kg; dims 3600×1280×1950 mm. Accessories: 300 l coolant, 80 bar high‑pressure, paper filter, lamp, collet device, USB, parts conveyor, chip conveyor, toolholder set. Achieves tight tolerances; ideal for automotive, watchmaking, aerospace, medical and toolmaking. Ielhoy S Dfueccqljtg

Condition: ready for operation (used), Year of construction: 2019, travel distance X-axis: 150 mm, travel distance Z-axis: 240 mm, number of axes: 2, Horizontal turning machine manufactured in 2019. This SCHAUBLIN 102Mi W25 features a W25 spindle nose and an integrated motor headstock. It includes a pneumatic clamping device and a Tripan-111S quick-change tool holder system. The machine is equipped with a 3-jaw chuck and a tailstock with a rotating center. If you are looking to get high-quality turning capabilities, consider the SCHAUBLIN 102Mi W25 machine we have for sale. Contact us for further details. • Spindle nose: W25 • Headstock: Integrated motor • Mounting: Mounted on workbench (Version CE) • Cross-slide: Crank cross-slide with digital measurement device • Tailstock: Morse Taper 2 • Color: RAL7015 / RAL9010 Additional equipment • Workbench: 2000 x 800 x 900 mm • Lista drawer cabinet: 564 x 725 x 850 mm • Pneumatic clamping device W25 with graphite distributor • Tripan-111S quick-change tool holder system • Boring bar holder, 30° angled, max Ø12 mm • 3-jaw chuck W25/Ø100 (cast iron, manual) • Tailstock accessory: Rotating center 60°, Ø18 mm (Gepy) • Collet set W25 (0.5–25 mm, 50 pieces) • Mebiflex 70 lamp Technical Specification Itjlhccqsy Snmvslsg Counter Spindle No Driven Tools No

Condition: used, Year of construction: 1995, functionality: fully functional, Equipment: documentation/manual, 2-axis CNC lathe, manufactured in 1995, complying with CE standards FANUC 0-T CNC control Flat guides ASA 6" Itjlhccqjy S R Ayeljg Bar capacity: 62mm Maximum turning diameter over bed: 600mm Maximum turning diameter: 250mm Maximum turning length: 630mm Maximum spindle power: 15Kw Weight: approximately 5,000 Kg. Complete with: Hydraulic chuck Tailstock 12-position automatic tool turret Chip conveyor

Condition: excellent (used), Year of construction: 2018, MAZAK QUICK TURN 100MSY Max. turning diameter: 280 mm Iolhsygi A Hoccqletg Max. milling speed: 5,000 rpm Max. spindle speed: 5,000 rpm Max. bar capacity: 42 mm Machine is equipped with: - CNC control: Mazatrol SmoothG - KITAGAWA three-jaw chuck for main spindle, diameter 169 mm - KITAGAWA three-jaw chuck for sub spindle, diameter 135 mm - Tool Eye - C-axis - C-axis on sub spindle, 0.0001° - Y-axis - Automatic parts catcher - Interface for bar feeder - Signal tower (3-color LED) - Reinforced coolant pump - Chip conveyor - Standard MAZAK tool package - IRCO BREUNING short bar loader, model ILS-MUK 7012-III

Condition: ready for operation (used), Year of construction: 2002, operating hours: 33,908 h, functionality: fully functional, CNC – Lathe Manufacturer: WEILER Model: E 35 D Year of manufacture: 2002 Technical data Brand: WEILER Model: E35 D Year: 2002 Center distance: 950 mm Center height: 200 mm Itolhjy R Uukeccqlog Turning diameter over bed: 410 mm Spindle bore: 54 mm Max. turning diameter: approx. 260 mm Spindle speed: 20 – 3000 rpm Power: 10 kW Dimensions: approx. L 2.60 x W 1.60 x H 1.70 m Weight: approx. 2.5 t Equipment • Operating manual • Coolant system • 3-jaw chuck • Collet chuck adapter All information subject to change without notice. A demonstration under power is possible at any time in our exhibition hall.

Condition: ready for operation (used), Year of construction: 2012, spindle speed (max.): 4,000 rpm, travel distance X-axis: 180 mm, travel distance Z-axis: 42 mm, total height: 1,650 mm, overall weight: 1,200 kg, controller manufacturer: FAGOR, controller model: 8055tc, number of axes: 2, This Pinacho Smart Turn 180/42 1000 was manufactured in 2012. A robust horizontal turning machine featuring a turning length of 1000mm, spindle clearance of 42mm, and a turning diameter of 360mm. It includes an 8-fold tool changer and Fagor 8055tc control. Dimensions are 2.5 x 1.15 x 1.65 m, weighing approximately 1.2t. Consider the opportunity to buy this Pinacho Smart Turn 180/42 1000 horizontal turning machine. Contact us for more information. • Turning diameter: 360 mm • Turning length: 1000 mm • Tool changer: 8-fold vdi20 • Machine still under power • chuck: 200 mm in diameter. Itjlsx D Ivfjhccqlog Dimensions Machine Depth 2500 mm Technical Specification Driven Tools No Counter Spindle No

Condition: ready for operation (used), Year of construction: 2009, spindle speed (max.): 4,500 rpm, travel distance X-axis: 250 mm, travel distance Z-axis: 600 mm, controller manufacturer: TRAUB, controller model: TX8i, number of axes: 7, This 7-axis TRAUB TNC 65 DG was manufactured in 2009. It features a powerful tool drive turret with a speed of 4000 rpm and a high-pressure coolant system with programmable pressure stages. The machine is designed for machining metals and plastics, equipped with a C-axis for numerically controlled turning and positioning. If you are looking to get high-quality turning capabilities, consider the TRAUB TNC 65 DG horizontal turning machine we have for sale. Contact us for further details. • Control system TX8i with 64-bit RISC high-performance processor and additional PLC high-performance processor, integrated PC • TX8i control with 64-bit technology including TFT color flat screen and electronic handwheel • Electrical system according to VDE/EN 60204 • Multi-range transformer for 460V / 400V / 380V / 220V / 200V, 50 Hz Itjley Sg Nijhccqlsg • Operating voltage machine 400V 50 Hz • Operating voltage accessories 230V 50 Hz • Control voltage 24V DC • Machine equipped with interference suppression set for industrial networks (EMC compliant) • CE conformity declaration and CE marking • Designed for machining metals and plastics with defined cutting edge • Main spindle C-axis (numerically controlled turning and positioning device) • Counter spindle C-axis with speed-synchronous control • Tool drive turret 1: power 3.1 kW, speed 4000 rpm • Tool drive turret 2: power 3.1 kW, speed 4000 rpm • Tool monitoring TX8i with wear and breakage control via axis motor monitoring • Thread cutting without compensating chuck • Software TRAUB Polyform for milling programming with C-axis (front, longitudinal, cylindrical surface) • Network connection preparation with Ethernet interface and RJ45 socket • Z/V axis counter spindle software with defined end position (plan surface transfer) • 65 mm spindle bore / 60 mm max clamping diameter depending on collet system Additional equipment • Workpiece unloading device with gripper in turret 2 (automation) • Chip conveyor (hinged belt), discharge height 1200 mm • High-pressure coolant system with programmable pressure stages 20 / 5 bar • Preparation for extraction and filter system, connection Ø200 mm, 400V socket • Bar feeder interface preparation DNH 61 Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: ready for operation (used), Year of construction: 2000, travel distance X-axis: 210 mm, travel distance Z-axis: 450 mm, controller manufacturer: TRAUB, controller model: TX8H, number of axes: 3, This 3-axis TRAUB TNA 300 horizontal turning machine was manufactured in 2000. It features a spindle diameter of 65 mm and includes a high-pressure coolant system, driven tools with 4 kW power, and an automatic bar change system. The machine is equipped with a chip conveyor and tool monitoring systems for enhanced efficiency. If you are looking to get high-quality turning capabilities, consider the TRAUB TNA 300 machine we have for sale. Contact us for further details. • Spindle bore / machine capacity: 65 mm • Installed 185E collet system capacity: max. 60 mm clamping diameter • Machine version: without tailstock • Basic configuration: included • Hydraulic hollow clamping cylinder: included • High-pressure coolant system: 12 bar / 3 bar • Control system: TX8H, 32-bit technology; processor latest generation (at time of build); parameter data on diskette • Axes/functions: • C-axis: included (numerically controlled spindle positioning and turning axis) • Y-axis: not included • Driven tools: included; power 4 kW • Monitoring and safety: • Tool breakage monitoring: included • Tool wear monitoring: included • Automatic drive shutdown after material end: selectable via parameter • Error message via parameter: selectable • Guideway cover: included • Workholding: • Collet clamping system: ROHM • Collet system compatibility: • DIN 6343 size 48, max diameter 42 mm • Rubberflex series 52 compatible • Rubberflex series 36 compatible • Fahrion collet FM 1149 MB compatible • Fahrion collet FM 1148 MB compatible • Electrical: • Electrical system according to: VDE / EN 60204 • Operating voltage: 400 V / 50 Hz • Accessory voltage: 230 V / 50 Hz • Control voltage: 24 V DC • Multi-voltage transformer: 460 / 400 / 380 / 220 / 200 V • EMC: • Compliance: industrial class A • Standards: EN 50081 / EN 50082 / EN 55011 / EN 55022 • Machine standards: DIN EN 292; DIN EN 294; DIN EN 418; DIN EN 60204-1 • Pneumatic system: Mannesmann Rexroth ISO Additional equipment • Chip conveyor: included • Workpiece removal device: included; via conveyor, left side discharge • Bar feeder preparation: included • Bar feeder: TRAUB DNH 61-3000 (automatic) • Feeding: telescopic pusher system • Bar shapes: round / hexagonal / square • Maximum bar length: 3200 mm • Maximum bar diameter (long bars): 63 mm • Maximum bar diameter (short pieces): 65 mm • Automatic bar change: included Iolhccey Sg Dgeqletg • Residual piece removal: forward • Central adjustment of bar diameter: included • Stepless feed force adjustment: included • Central magazine adjustment: included • No guide channel change required • No clamping sleeve change required • Short remnant pieces possible • Transverse loading system • Transport weight: approx. 2100 kg Technical Specification Counter Spindle No Driven Tools Yes

Condition: ready for operation (used), Year of construction: 2012, spindle speed (max.): 6,000 rpm, travel distance X-axis: 81 mm, travel distance Z-axis: 80 mm, spindle motor power: 20,000 W, number of axes: 5, This 5-axis Index ABC horizontal turning machine was manufactured in 2012. It features a main spindle with a maximum speed of 6000 rpm and a sub spindle with a speed of 4500 rpm. The machine includes two turrets, each equipped with X and Z axes, and a powerful tool drive. If you are looking to get high-quality turning capabilities, consider the Index ABC machine we have for sale. Contact us for further details. • Main spindle: D65, spindle interface AD140, ID83, max speed 6000 rpm; max power 20 kW at 100% duty cycle; C-axis; electronic synchronization between spindles • Sub spindle: 7.5" chuck interface, max speed 4500 rpm • Chuck: 3-jaw KFN95/3, clamping force 480 daN, max 4000 rpm • Turrets: two turrets each with X and Z axis; tool drive on turret 6000 rpm, 3.3 kW • Rear working attachment: without quill, 5 quill positions • Coolant: 80 l/min at 8 bar and 20 l/min at 18 bar; system prepared for emulsion; coolant return at spindle end D60 (without bar feed) • Control: INDEX C200-4D based on Siemens 840D; color display 26 cm; thread cutting without compensating chuck; motor-current-based tool monitoring; internal tool management and setup dialog; extended machining cycles; parts counter and production monitoring • Power/connection data: 400 V, 50 Hz TN network; total connected load 45 kVA; rated power 38 kW; rated current 65 A; max fuse protection 100 A • Hydraulic hollow clamping cylinder D65 Additional equipment • Chip conveyor: hinged belt, discharge height 1250 mm • Bar feeder: MBL 65/3700 for spindle height 1010 mm; bar diameters up to 65 mm; bar feeder length 3700 mm; guide channel system with rolling bearings; loading rods (Ø12 mm and Ø20 mm, length 1400 mm); guide sets for 14–18 mm, 18–22 mm, 22–65 mm • Workpiece unloading device for main and sub spindle with part catcher • Teleservice preparation (ISDN) with software • Machine prepared for extraction system 230 V • Working area light • Two electrical cabinet cooling units • Transformer 3 kVA Technical Specification Counter Spindle Yes Driven Tools Yes Itolhcjy Sg Daocqlsg

Condition: ready for operation (used), Year of construction: 2020, spindle speed (max.): 1,800 rpm, travel distance X-axis: 203 mm, travel distance Z-axis: 1,219 mm, number of axes: 3, This 3-axis HAAS TL-2 was manufactured in 2020. It features a maximum cutting length of 1,218 mm and a maximum cutting diameter of 203 mm. The machine is equipped with an 8" manual 3 jaw chuck and a 4-station tool turret, providing versatility for various turning applications. If you are looking to get high-quality turning capabilities, consider the HAAS TL-2 horizontal turning machine we have for sale. Contact us for further details. • Max cutting diameter: 203 mm • Max cutting length: 1,218 mm • Spindle: A2-5 nose • Tool turret: 4-station • Functionality: Rigid tapping • Condition: Very good; very low running hours; can be checked under power Additional equipment • 8" manual 3-jaw chuck (A2-5) Itelhoy Sgvcsccqleg • Tailstock • Manual steadyrest Technical Specification Counter Spindle No Driven Tools No

Condition: ready for operation (used), Year of construction: 2013, spindle speed (max.): 6,000 rpm, travel distance X-axis: 260 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 350 mm, spindle motor power: 11,000 W, total height: 2,250 mm, total width: 1,985 mm, overall weight: 4,050 kg, controller manufacturer: OKUMA, controller model: OSP P300L, product length (max.): 1,734 mm, number of slots in tool magazine: 12, number of axes: 3, This 3-axis Okuma LB2000EXII MC was manufactured in 2013. It features a maximum swing diameter of 580 mm and a maximum machining diameter of 360 mm. The machine includes a turret head with 12 tool positions and a rapid traverse speed of 25 m/min on the X-axis. If you are looking to get high-quality turning capabilities, consider the Okuma LB2000EXII MC horizontal turning machine we have for sale. Contact us for further details. • Chuck size: 6" • Max. swing diameter: 580 mm • Max. machining diameter: 360 mm • Max. machining length: 150 mm • Spindle power: 11.0/7.5; (15/11; 22/15) kW • Turret: • Tool positions: 12 • External tooling: 20 x 20 mm • Internal tooling: Ø 32 mm • Driven tool speed: 45–6000 rpm • Driven tool power: 5.5/3.7 (7.1/4.1) kW • Rapid traverse: • X-axis: 25 m/min • Y-axis: 12.5 m/min • Z-axis: 30 m/min • W-axis: — • C-axis: 200 rpm • Hours: • Total: 43,157 • Cutting: 18,671 Iolhcsy Sgr Rjcqlstg Additional equipment • Bar feeder: IRCO MUK-7012 (bar Ø 6–70 mm, length 1250 mm) • Tool holders (including driven tool holders) • Collet chuck: Hainbuch SPANNTOP Technical Specification Counter Spindle No Driven Tools Yes

Condition: ready for operation (used), Year of construction: 1999, number of axes: 5, This 5-axis TRAUB TNC65 DG was manufactured in 1999. It features a robust control system with TRAUB TX8H technology, dual tool carriers with 10 stations each, and a maximum clamping diameter of 60 mm. The machine is equipped with a coolant cleaning system and a hinged belt conveyor for efficient chip removal. If you are looking to get high-quality turning capabilities, consider the TRAUB TNC65 DG horizontal turning machine we have for sale. Contact us for further details. • Control system: TRAUB TX8H (32-bit technology) • Main spindle: Yes • Counter spindle: Yes • Spindle synchronization: Yes • C-axis main spindle: Yes • C-axis counter spindle: Yes • V-axis: Yes (programmable position) • Tool carriers: 2 (tool carrier I and II) • Driven tools on tool carrier I: Yes Itslhcoy R Uvuecqlog • Driven tools on tool carrier II: Yes • Number of tool stations: 10 per tool carrier • Thread cutting: Without compensating chuck • Drilling and milling units: X-direction (i=1 and i=3) and Z-direction (i=1 and i=3) • Coolant system: Cleaning system with cyclone filter • Coolant tank capacity: approx. 470 liters • Coolant pump: Supply for both turrets integrated • Hydraulic system: Yes • Operating voltage: 400 V / 50 Hz • Control voltage: 24 V DC • Accessory voltage: 230 V / 50 Hz • Multi-range transformer: 460 V / 400 V / 380 V / 220 V / 200 V • Standards: EC Machinery Directive, EMC Directive, Low Voltage Directive, DIN EN 292, DIN EN 294, DIN EN 418, DIN EN 60204 • Tool monitoring: Tool breakage and wear monitoring • Programming software: TRAUB Polyform • Coolant type: Water-based coolant compatible Additional equipment • Chip conveyor: Hinged belt conveyor • Bar feeder: TRAUB DNH 61-3000 (preparation included) • Workpiece ejection device: Yes • Workpiece removal device: Yes, with gripper • Collet system: Röhm, max clamping diameter 60 mm Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: good (used), Year of construction: 2011, functionality: fully functional, Control: Siemens 840D Spindle bore: 65 mm Speed: 4,000 rpm Tool holder: VDI 30 Main and counter spindle with C axis TOOL CARRIER I (XZ) Technology: Cross slide (3x) Travel: X= 70, Z= 115 mm Tool Carrier II (X/Z) Turret with 7 stations and subspindle All stations driven (3,000 rpm) Travel: X= 160, Z= 450 mm Tool Carrier III Turret with 8 stations Travel: X= 150, Z= 200 mm Tool Carrier IV (rear side) Ielhsy Rr U Usccqlstg Turret with 8 stations 3 tool holders for rear side EQUIPMENT - Chip conveyor - Bar feeder IEMCA MASTER 80/33 HF

Condition: ready for operation (used), Year of construction: 2013, operating hours: 9,554 h, travel distance X-axis: 239 mm, travel distance Z-axis: 826 mm, number of axes: 4, This 4-axis HAAS DS-30SSY was manufactured in 2013. It features Y-axis milling capability, a sub-spindle, and live tooling, enhancing its versatility for various machining tasks. The machine includes a 12-station bolt-on turret and comes equipped with a chip conveyor and mist collector. If you are looking to get high-quality turning capabilities, consider the HAAS DS-30SSY horizontal turning machine we have for sale. Contact us for further details. Ijlhccsy R Dikjqletg • Condition: In good condition • Usage: Motion Time 54,567 h; Servo Time 62,795 h • Spindles: Dual spindle (sub-/counter spindle; rarely used) • Turret: 12-station bolt-on turret (BMT65 style) • Capabilities: Y-axis milling, live tooling • Electrical: 360–480 V, 3-phase, 50/60 Hz; Full load amps 40 A; Largest load 70 A; Short-circuit interrupting capacity 10,000 A Additional equipment • Chip conveyor (Jorgensen) • Mist collector: SARA Ultra-Jet 2 SD • Parts catcher • Coolant hose • Foot pedals • Samchully MH-206V1 as a counter-spindle chuck Technical Specification Counter Spindle Yes Driven Tools Yes