Used Roll feeders for sale (17)

Condition: new, material thickness: 10 mm, material width: 250 mm, sheet thickness (max.): 10 mm, sheet thickness steel (max.): 10 mm, STRIP-FEEDER .. sheet width max.: 250 mm .. sheet thickness max.: 10 mm Strip feed unit (without servo) for GKP or MFA 250T Strip thickness: 10 mm Cjb E Tfqewfqq Dofsgt Strip width: 250mm DYNABOX 90 MEDIUM gearbox It is recommended to use: Servo motor BECKHOFF AM8062-0L20 Resolution 0.1mm

Condition: used, Year of construction: 2001, material width 400 mm material thickness 0,5 - 4,0 mm material cross-cut 1200 mm² roll diameter 80 mm Cgsbevzxqlj E Tfqfst feed length - 9999,9 mm speed - 90 m/min weight of the machine ca. 0,5 t dimensions of the machine ca. 1,2 x 1,0 x 1,2 mxmxm servo roll feed

Year of construction: 2023, Condition: like new (used), width 600 mm accuracy 0,04 mm force max 3000N Cebslczm Io E Tfqfjgt waranty 2 Years

Condition: refurbished (used), Year of construction: 2025, Drive: servo motor Belt width max. 300 mm Belt thickness 0.5 - 4.0 mm Cross-section max. 1,200 mm² Csb E Tfor H Dwioqfsgt Feed length 0 - 9,999.9 mm Accuracy + / - 0.05 mm Roller diameter 80 mm The feed rollers are hardened and ground. The top roller is lifted to feed in the strip via a pneumatic cylinder and valve. pneumatic cylinder and valve. The contact pressure of the top roller is applied pneumatically via short-stroke cylinders. The top roller is mounted in a torsion-resistant manner to prevent one-sided roller pressure. roller pressure is prevented. Off-center belt transport is permitted. An infeed roller basket, an adjustable lateral belt guide and a belt end belt end control on the infeed side are included in the standard version. included. Protective covers on the feed rollers and the drive elements. The intermediate lifting can be closed and switched off

Condition: new, Year of construction: 2025, Band width: max. 38 mm Feed length: max. 50 mm Cgeb E Tfqs Ea U Hjfot Band thickness: 0.05...1.02 mm Stroke rate: max. 260 rpm at full feed length Feed force: 90 N Optionally with mechanical control valve or optionally with electric valve (24V or 230V) Many other band widths and feed lengths available.

Condition: good (used), Rolling width 70 to 280 mm pass thickness 0.50 to 8.50 mm (9.00 mm feasible) Ceb E Tsgz Afyjfqfogt decoiler 400 / 500 mm decoiler 400 / 500 / 600 mm power 75 / 90 kW Strip tension control Rolling gear: Bevel helical gearbox Type: Kestermann WH660/50 Power: 122 PS / 90 kW Gear ratio 1 : 27.4 Shaft-mounted gearbox: Type Kestermann SAR 300 AG Gear ratio 1 : 1

Condition: new, material thickness: 6 mm, material width: 210 mm, sheet thickness (max.): 6 mm, sheet thickness steel (max.): 6 mm, STRIP-FEEDER .. sheet width max.: 210 mm .. sheet thickness max.: 6 mm Strip feed unit (without servo) for GKP or MFA 160T Strip thickness: 6 mm Strip width: 210mm DYNABOX 45 MEDIUM gearbox It is recommended to use: Servo motor BECKHOFF AM8543-0E20 Cgob E Tfewfp R Njqfet Resolution 0.1mm

Condition: used, Year of construction: 1995, material width 310 mm material thickness 0,2 - 3,0 mm roll diameter 80 mm feed length 0 - 9999,9 mm Cobovzxpzo E Tfqfjgt speed 80 m/min power requirement 3,0 kW weight of the machine ca. 0,45 t dimensions of the machine ca. 1,5 x 1,0 x 1,2 mxmxm electronic Servo roll feed with AC Servo-Motor (Siemens), pneumatic intermediate lifting of the rolls, band guide (centrally adjustable), inlet roller basket, mounting bracket

Year of construction: 2018, Condition: as good as new (ex-display), Belt width max. 140 mm Strip thickness up to 1.5 mm Accuracy +/- 0.05 mm Tensile force 500 N ( 50 kg). Cgjbecn Dv Nj E Tfqfet

Condition: used, material width max. 100 mm material thickness 0 - 3 mm feed length max. 120 mm Cgjb Ejtqm Dbj Tfqfjt material cross-cut 150 mm² pulling capacity 400 N repeating accuracy +/- 0,03 mm air path of the top roller max. 5 mm pressure of the top roller max. 6 kN engine torque 6 Nm total power requirement kW weight of the machine ca. t dimensions of the machine ca. m

Condition: like new (used), Year of construction: 2024, Band width: max. 76mm Cob Eexaqvj Tfqfegt Feed length: max. 76mm Band thickness: 0.076 - 1.91mm Speed: max. 195 strokes/min at full feed length Feed force: 205N with mechanical control valve or optionally as in the photo with electric valve (24V or 230V) also available in: - Band widths from 38...400mm - Feed lengths up to max. 300 mm - Band thicknesses 0.05...3.18 mm

Condition: used, material width 45 mm material thickness 45 mm feed length 100 mm compressed air 6 bar clamping force of fastening pincer 25000 N clamping force of moving pincer 15000 N feeding force 10000 N weight 0,1 t Cgeb Eovuunys Tfqfet Dimensions (WxDxH) 0,6 x 1,0 x 1,0 m hydraulic pincer feed with special clamping jaws for profiles diameter approx. 45 mm as is where is, WITHOUT putting into operation

Year of construction: 2023, Condition: new, Control with motor for all old NC feeds. Substitute for Alba, Schleicher, Dreher, PA, Cob E Tocn Du Ijfqfsgt Torque 6-90 Nm Complete price from 3,900.00 for Alba stepper motors from 5,900.00 for servo drives. To be installed by any home electrician.

Year of construction: 1994, Condition: used, material width 400 mm material thickness 0,4 - 5,5 mm feed length mm roll diameter 160 mm Cgjb Ejiqp Eyj Tfqfet speed 120 m/min weight max. in kg 50/180 kg total power requirement kW weight of the machine ca. t dimensions of the machine ca. m

Condition: used, material width 200 mm material thickness - 6,0 mm feed length 0 - 120 mm Weight 0,40 t required space 0,9 x 0,8 x 0,7 m mechanical roll feed drive via main shaft / pivot shaft of the press - pivot shaft / mounting plate not included max. no. of strokes approx. 1500 / min as is where is, WITHOUT putting into operation, in given condition Csbsvuunte E Tfqfogt

Year of construction: 2017, operating hours: 30 h, Condition: as good as new (ex-display), Belt thickness max.4 mm Strip width 300 mm Repeatability +/- 0,05 mm NC drive with compact control Feed force 3000 N (300 kg) Ceb E Tfsb Nbgljqfegt Belt pressure max. 1,2 to

Condition: used, Year of construction: 1982, material width 203 mm material thickness 0,1 - 1,9 mm feed length 0 - 101 mm feeding force 450 N clamping force of moving pincer 2250 N clamping force of fastening pincer 650 N weight 0,02 t required space (WxDxH) 0,5 x 0,8 x 0,5 m Cjb E Tevuumvjfqfjgt pneumatic pincer feed with pneumatic control, electromagnetic valve, pneumatic intermediate lifting of the gripper clamp, mounting bracket max. stroke rate at max. feed length 160 / min WITHOUT any additional work can be inspected in running condition in our warehouse