Used Gripper for sale (816)

Condition: excellent (used), Year of construction: 2008, operating hours: 2,483 h, functionality: fully functional, machine/vehicle number: 8015, travel distance X-axis: 1,200 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, controller model: Heidenhain iTNC 530, spindle speed (max.): 12,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 1,200 mm Travel range, Y-axis: 600 mm Travel range, Z-axis: 600 mm Rapid traverse rate X/Y: 30 m/min Rapid traverse rate Z: 24 m/min Table size: 1,300 × 600 mm Spindle speed: 50–12,000 rpm Spindle power: 21 / 15 kW Tool holder: BT40 Spindle drive: direct drive Tool positions: 40 Tool change time: approx. 4 s Tool changer: dual gripper MACHINE DETAILS Coolant pressure: 20 bar CNC control: Heidenhain iTNC 530 Screen diagonal: 15 inches Operating voltage: 400 V Connected power: 25 kVA Mains frequency: 50/60 Hz Number of phases: 3 Machine weight: approx. 7,500 kg Fgodpfx Ao Aggibjkmoi Operating hours Spindle hours: 2,483 h Machine operating hours: 14,198 h Control operating hours: 65,193 h EQUIPMENT Automatic tool changer with dual gripper Internal cooling through the spindle (IKZ), Form A High-pressure coolant system Additional coolant tank Two switchable filter cartridges Chip conveyor parallel to the X-axis Three-color signal light (red/yellow/green) Fully enclosed work area Work area lighting Machine documentation Toolbox Alignment screws and washers CE specification

Condition: used, machine/vehicle number: 008493, Introduction system: with grippers Fgodpjz S T Uujfx Akmei

Condition: used, machine/vehicle number: 008588, Max. panel width: 1600 mm Max. panel length: 3700 mm Main saw blade projection: 125 mm Fgjdpfoy In Avjx Akmsi No of Grippers: 9 Thin sheet loading: yes

Condition: used, machine/vehicle number: 008589, Max. panel width: 1600 mm Max. panel length: 3700 mm Fsdpfx Asy In Apekmegi Main saw blade projection: 125 mm No of Grippers: 9 Thin sheet loading: yes

Condition: used, Year of construction: 2018, functionality: fully functional, spindle speed (max.): 24,000 rpm, number of spindles: 6, Equipment: chip conveyor, System Description • Cutting of aluminum profiles. • Milling operations. • End-face processing of profiles. • Acquisition and provision of production data. Profile processing is performed via CNC-controlled machining units. Feeder magazine: approx. 15 profiles at 100 mm profile width. Max. profile length: 7,500 mm Min. processable remaining length: 1,000 mm Positioning speed: 100–250 m/min Min. finished part length: 350 mm Max. finished part length: 7,500 mm Max. machining width: 250 mm Max. machining height: 150 mm Min. machining width: 40 mm Min. machining height: 40 mm Gripper adjustment • Adjustment of the gripper in the Y and Z directions • Control via two servo axes Bar start measurement • Bar start measurement using a light barrier • Monitoring of correct profile length Height measurement • Automatic height measurement to determine profile tolerances. • Software-assisted correction of necessary machining lengths. Width measurement • Automatic width measurement to detect profile tolerances. • Software-assisted correction of machining positions. CNC main machining station Design: Ring module "Circular" Machining axes: 3 servo axes Rotational movement: 360° Number of milling units: 6 Milling spindle max. speed: 24,000 rpm Spindle power: 4 kW Machining functions • Multi-sided profile machining. • CNC-controlled milling operations. • Automatic positioning of machining units. • Tool breakage monitoring. Saw, type: SUA 1 Fodpfx As Aiwxiokmegi Number of saw units: 1 Design: 4-axis version Swivel range: 45°–135° Maximum saw blade diameter: 600 mm Motor power: 2.2 kW 3-axis machining station "Kämpferfräse Alu" Axes: 3 Milling motor power: 4 kW Speed range: 3,000–12,000 rpm Max. cutter diameter: 160 mm Tool change: Automatic Tool positions: 9 Machine HMI • 3D machine visualization • Display of machining programs • Collision check • Programming interface • Data management • Interface management • Re-optimization • Provision of production data Software: UniLink • Acquisition and provision of machining data. • Interface between upstream data processes and machine control. BDE/BDA Software extension for operational data acquisition and operational data analysis. • Part counting. • Cycle time recording. • Production time recording. • Material shortage alerts. • Tool counting. • Status messages. • Production data management. Labeling Automatic labeling system, type Sato • Automatic label printing • Automatic application of labels • Side labeling of the profiles • Integration into the machining and transport process Profile transport and disposal Special transport • Inline design. • Overall length: 7,500 mm. • Material transport behind the machining stations. Scrap material transport • 2 conveyor belts for aluminum waste. • Arrangement in the machine area of the SUA-1 saw. • Removal of the aluminum waste generated during sawing. Waste bin • 1 waste bin under the Circular ring module. • Manual cleaning. System performance Reference component Specified machining time Double-winged window with mullion: Approx. 12 min. 40 sec. F30 door: Approx. 10 min. 20 sec. Facade element: Approx. 18 min. The calculation is performed under the conditions described in the original document. Specified deviation of the calculated performance data: ±5%.

Condition: good (used), functionality: fully functional, Year of construction: 1988, 1 used Gripper stacker Manufacturer: J. Ott, Maschinenbau GmbH Model: JOTTA gripper stacker Year of manufacture: 1988 Location: Northern/Eastern Germany Fgedpfe Ad Htyjx Akmoi AVAILABLE IMMEDIATELY If interested, we look forward to receiving your price offers! Offer and prices are strictly net, ex-location. Subject to prior sale; errors and/or misrepresentations excepted. Sold without any guarantee and/or warranty; offered "as is," in its current position (lying and/or standing). Any reproduction, further use, publication, and/or copying of this offer—in whole or in part—is strictly prohibited!

Condition: used, Year of construction: 2012, cutting width (max.): 4,500 mm, cutting length (max.): 2,200 mm, TECHNICAL DETAILS Panel width: max. 4,500 mm Panel length: max. 2,200 mm Main saw blade overhang: max. 95 mm Number of longitudinal cutting grippers: 5 Number of transverse cutting grippers: 8 + 4 Saw carriage 1 Tool diameter, main saw: max. 380 mm Motor power, main saw: 15 kW Tool diameter, scoring saw: max. 200 mm Motor power, scoring saw: 2.2 kW Feed rate: max. 140 m/min Fgodpfx Ae Aihrcjkmoi Saw carriage 2 Tool diameter, main saw: max. 380 mm Motor power, main saw: 15 kW Tool diameter, scoring saw: max. 200 mm Motor power, scoring saw: 2.2 kW Feed rate: max. 140 m/min EQUIPMENT Saw carriage with main saw and scoring unit Second flexible slide Quick-change system for saw blades Barcode label printer Windows 10 operating system Biesse-OSI machine programming software CE marking The machine is sold and delivered in its current and legal condition (“as is, where is”) based on photo documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at its destination. External reference: 5711

Condition: good (used), Year of construction: 2005, Yaskawa Motoman YR-HP3L-A00 3kg 6-axis industrial robot arm with SCHUNK PGN 64-1 gripper for sale (controller not included) For sale: a used Yaskawa Motoman YR-HP3L-A00 6-axis industrial robot arm equipped with a SCHUNK PGN 64-1 pneumatic parallel gripper; controller not included. Manufacturer: Yaskawa Electric Corporation / Motoman Model: YR-HP3L-A00 Design: Articulated industrial robot Number of controlled axes: 6 Maximum payload: 3 kg Maximum horizontal reach: 859 mm Maximum vertical reach: 1469 mm Repeatability: ±0.04 mm Robot arm weight: 49 kg Compatible control system: Yaskawa Motoman NX100 Manufacturing date: April 2005 Place of manufacture: Japan SCHUNK PGN 64-1 gripper: Design: Two-finger pneumatic parallel gripper Manufacturer ID: 371090 Stroke per finger: 6 mm Total gripping stroke: 12 mm Closing force: 220 N Opening force: 255 N Nominal operating pressure: 6 bar Permissible operating pressure: 2–8 bar Repeatability: 0.01 mm Weight: 0.27 kg Maximum workpiece weight recommended by manufacturer: 1.25 kg Maximum permissible ambient temperature: 90 °C Protection class: IP40 Applications: Gripping and moving small parts Pick-and-place operations Machine tending Assembly Dispensing and sorting Packaging tasks The robot arm's maximum payload of 3 kg includes the weight of the wrist-mounted gripper and the custom gripper fingers. The robot is sold without a control unit or teach pendant. Commissioning requires a compatible Yaskawa Motoman NX100 control system, as well as professional installation and programming. Fedpfjz Ahvisx Akmogi Used equipment, in the condition shown in the photos.

Condition: new, Vacuum gripper FMP-S-SVK-442-3R18-O20 Fedo Afdvhjpfx Akmegi

Condition: used, Year of construction: 2007, cutting width (max.): 4,300 mm, cutting length (max.): 2,200 mm, Equipment: scorer, TECHNICAL DETAILS Panel width: max. 4,300 mm Panel length: max. 2,200 mm Cutting height: max. 110 mm Saw blade overhang: max. 120 mm Feed rate: max. 100 m/min Saw carriage Feed rate: max. 150 m/min Main saw Motor power: 18 kW Saw blade overhang: 120 mm Scoring saw Fgjdpfx Ao Aihrnekmoi Motor power: 2.2 kW Gripper system Number of grippers: 9 EQUIPMENT Second flexible sliding table Panel turning station Thin panel loading Saw unit Scoring unit QUICK CHANGE saw blade quick-change system Windows XP control OSI machine programming software CE marking The machine is sold and delivered in its actual and legal condition (“as is, where is”) based on photo documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at its destination. External reference: 8158

Condition: like new (used), Year of construction: 2017, operating hours: 280 h, functionality: fully functional, machine/vehicle number: CR751, input voltage: 400 V, type of input current: three-phase, number of axes: 6, Equipment: documentation/manual, TECHNICAL DETAILS Number of axes: 6 Fgjdpfx Aks Ahn Efomei MACHINE DETAILS Robot controller: Mitsubishi MELFA Input voltage: 400 V Type of current: Three-phase Operating hours: 280 h EQUIPMENT Original Mitsubishi robot controller Teach pendant / programming handheld device Software and programming equipment Robot connection cable and accessories Vacuum gripper Complete robot system Low operating hours, not used in continuous series production Documentation/manual

Condition: like new (used), functionality: fully functional, Year of construction: 2019, machine/vehicle number: DN1792, Tiger Lifting Equipment – Kurschildgen GmbH, Lifting Equipment Manufacturing Fedpfx Aszv E Ddskmegi Spindle gripper, gripper with handwheel and positively locking gripping arms for lifting a hexagonal contour using a crane. Load capacity: 400 [kg] Type: ST-SU-040-600_6KT-06357 Gripping width: 600 [mm] Gripping breadth: 180 [mm] Payload: 400 kg Weight: 75 kg 6 units available!!! Like-new condition with minor signs of use, see images. Item location is 75053 Gondelsheim. See images. Shipping via freight forwarder or collection by appointment only.

Condition: like new (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 2031781, overall weight: 330 kg, Hegla Gripper Fgodpozq Rrpsfx Akmei Model: LG 30L Load capacity: 3000 kg Maximum lifting height: 3210 mm Year: 2006 Own weight: 330 kg

Condition: used, Bosch Scara SR 800 robot with controller + cell, pivoting arm robot with gripper. You are purchasing a functional Bosch Scara SR 800 robot with controller and a complete cell. Upon request, we can also ship only the robot without the cell. Everything is in working order and has been regularly maintained. Fgsdpfx Akoyfhn Ssmei You can find more items – new and used – in our shop! International shipping costs available upon request!

Condition: refurbished (used), Year of construction: 2010, functionality: fully functional, working width: 2,500 mm, welding power (max.): 500 kVA, wire diameter (max.): 10 mm, type of input current: three-phase, mesh size: 25,002,500 mm, continuous power (apparent): 500 kVA, The VARO SARG-2500 is an automatic line designed for the production of welded wire mesh for fencing applications, equipped with medium-frequency welding technology. The machine is designed to process mesh panels up to 2,500 x 2,500 mm, using longitudinal and cross wires with diameters ranging from 3.0 to 8.0 mm. The minimum adjustable pitch is 30 mm for longitudinal wires and 10 mm for cross wires. The welding system consists of 12 welding heads with double-stage pneumatic cylinders and 2 TECNA 250 kVA welding transformers, controlled by inverters. The production speed specified in the technical documentation is 70–90 welds/min. The line includes automatic loading of the longitudinal wires, an electronically controlled pushing system for feeding the wires into the welding station, and an automatic system for loading the upper and lower cross wires. Mesh advancement is electronically controlled by a brushless motor, with adjustable mechanical grippers. After welding, an electronically controlled carriage transfers the mesh to the next processing stage. The system is equipped with two hydraulic side trimming units for cutting the protruding wire ends. Fjdpfx Ae Ahnkdokmegi The line also includes a bending station with an hydraulic press, needed for the 3D panels. After bending, the finished mesh is automatically transferred to the unloading station and deposited onto a supporting table or pallet. Machine operation is managed through a dedicated electrical control cabinet with Siemens S7 PLC, PC and operator panel for setting and controlling the production cycle parameters. Main Technical Specifications • Manufacturer: VARO • Model: SARG-2500 • Maximum mesh size: 2,500 x 2,500 mm • Longitudinal wire diameter: 3.0–8.0 mm • Cross wire diameter: 3.0–8.0 mm • Minimum longitudinal wire pitch: 25 mm, adjustable • Minimum cross wire pitch: 10 mm, adjustable • Number of welding heads: 12 • Welding transformers: 2 x TECNA 250 kVA three phases • Welding speed: 70–90 welds/min • Power supply: 400 V / 50 Hz • Hydraulic bending press: yes • Control system: Siemens S7 PLC + PC • Cross wire loading: Upper and lower • Side trimming: 2 hydraulic trimming units • Mesh feeding: Electronically controlled, brushless motor

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, With the following features: • Travel range: 400 x 350 x 350 mm • Table: 575 x 500 mm • Workpiece weight: 700 kg • Generator Genius 700 with Chameleon automation • 52 Ampere generator power • Rotary spindle • Internal, regulated heat exchanger • Fire extinguishing system Kraft & Bauer (This must be technically inspected and approved by the customer at their own expense after commissioning) • Extraction system • Control unit for automated or manual pallet carriers • EROWA quick-change chuck ITS • Software: 9.2.4 Chameleon automation system with: Fedpfx Ae Aig Szokmegi • Chameleon base unit • 1 x rail • 1 x magazine • 75 electrode positions ITS EROWA • 6 pallet positions PARTOOL • 1 loading drawer • Identification system • EROWA double rotating gripper ITS • PARTOOL Space requirement approx. 3.20 m * 3.40 m • Transport based on actual costs • IBN ZK 700 3,500.00 € • IBN Chameleon according to offer and specifications • Training ZK 700, 2 days at WESCHU Nürnberg, 1,800.00 € • Training Chameleon, 2 days at WESCHU Nürnberg, 1,500.00 € Possible costs for on-site technician and travel expenses: • Technician hourly rate according to the current Z&K price list • Travel and return trip including travel time: 1.70 € per km • Hotel + expenses: 150.00 € per day In addition: • Pallet clamping system made by PARTOOL 3,850.00 € • IBN & training based on actual costs

Condition: excellent (used), For sale: professional EXpressO vacuum lifter, German-made. This device is designed for lifting and transporting flat items using vacuum technology. Model features increased lifting capacity up to 70 kg, equipped with PIAB components and four large suction cups ensuring stable and secure handling. Fgjdpfxjz Slt De Akmsi Ideal for working with glass, sheet metal, panels, and other flat elements in industrial settings and warehouses. Technical specifications: Manufacturer: EXpressO Deutschland GmbH Type: Vacuum lifter Maximum lifting capacity: 70 kg Year of manufacture: 2012 Serial number: 2012 003 Model number: 060BLV1502162 Vacuum system: PIAB Number of suction cups: 4 Vacuum gauge Pneumatic connections Condition: Device in very good technical condition Fully operational both visually and mechanically Normal signs of use Complete as shown in the photos Applications: glass and window transportation sheet metal and panel handling production lines warehouses and logistics Included in the set: complete vacuum lifter control handle air installation Shipping: Courier delivery available.

Condition: good (used), Mechandling 579 Rotation reel gripper lifter 2009, Stainless, ultra powered rotation reel gripper, mobile, 12V Fgodpfx Aoz It E Dokmji

Condition: new, VGrader top feeder V12 Gripper - highest quality and maximum performance - robust, spring-mounted excavator teeth enable high operating speed - high-quality stainless steel bolts with durable POM bearing for wear-resistant operation and long service life - Device width: 220 cm - Working width: 195 cm Fgjdpfxs Aifgxj Akmji - Weight: 550 Kg

Condition: used, Year of construction: 2011, operating hours: 5,051 h, functionality: fully functional, machine/vehicle number: 20, travel distance X-axis: 730 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 800 mm, controller model: PRO 5, spindle speed (max.): 14,000 rpm, number of spindles: 1, number of slots in tool magazine: 60, Equipment: chip conveyor, documentation/manual, Makino A61nx, 4-axis horizontal machining center, fully functional and can be inspected while powered on. 11,324 hours of power-on time 5,051 hours of operating/runtime 3,253 hours of machining time 4,188 hours of spindle runtime A Travels  X-axis travel (frame) ..... 730 mm  Y-axis travel (spindle) ..... 650 mm Fodpfx Akszw Dzdsmjgi  Z-axis travel (table) ..... 800 mm  Distance from pallet surface to spindle center ..... 80 ~ 730 mm  Distance from pallet center to spindle nose ..... 100 ~ 900 mm  Linear guides, heavy-duty design, size (roller bearing) ..... #55  Size of ball screws (X, Y-axis / Z-axis) ..... #45 / #50 B NC rotary table (DD motor) C1 Spindle 14,000 rpm (240 Nm)  Tool holder ..... HSK-A63 D Feed drives  Rapid traverse speed ..... 60,000 mm/min  Feed speed ..... 1 ~ 50,000 mm/min  Feed speed (jog mode) ..... 1 ~ 8,000 mm/min Tool magazine  Storage capacity ..... 60 tools  Maximum tool diameter with space allocation ..... 170 mm  Maximum tool diameter without restrictions ..... 70 mm  Maximum tool length ..... 510 mm  Maximum tool weight ..... 12 kg Tool change time increases for tool weights over 8 kg.  Maximum imbalance relative to the gripper groove ..... 11.7 Nm  Maximum total weight of all tools in the magazine ..... 180 kg  Tool-to-tool change time (without door movement) ..... 0.9 s  Chip-to-chip time (ISO method) ..... 2.8 s  Tool ready time in the magazine (min./max.) ..... 3.1 / 6.1 s Drives  Main drive ..... AC15 kW  Feed drives (XYZ axes) ..... AC4 kW  Table (indexing table) ..... AC0.9 kW

Condition: like new (used), Year of construction: 2024, functionality: fully functional, machine/vehicle number: M134377I2WA, turning diameter: 300 mm, spindle speed (max.): 5,000 rpm, rotational speed (max.): 2,500 rpm, workpiece weight (max.): 30 kg, total height: 3,300 mm, total length: 2,200 mm, total width: 3,400 mm, overall weight: 9,600 kg, Equipment: documentation/manual, rotational speed infinitely variable, Fully automated Hwacheon Hi-TECH CNC lathe with WEKAL portal system including robot Base: Hwacheon Hi-TECH 450BL YSMC (Siemens) Year of manufacture 2024 | Like new | Manufacturer's warranty until 03/26/2027 - transfer possible after coordination with the manufacturer | Immediately available Highlights ✓ Year of manufacture 2024 ✓ Automatic door drive ✓ Like new condition ✓ Robot interface ✓ Fully functional ✓ Stroke monitoring ✓ High-pressure coolant system ✓ Siemens SINUMERIK with ShopTurn ✓ Oil/emulsion mist filter ✓ DXF reader integrated ✓ Fully automatic WEKAL portal system ✓ Y-axis ±60 mm ✓ WEKAL WRB roller conveyor ✓ Counter spindle 4,000 rpm ✓ Robot gripper module ✓ Driven tools up to 5,000 rpm ✓ Complete documentation ✓ Torque upgrade ✓ Ongoing maintenance with records ✓ Completely automated manufacturing cell The system is designed for the automated machining of round material. Workpiece range: • Diameter 50–300 mm • Workpiece weight up to 30 kg The WEKAL automation system handles the loading and unloading of workpieces and enables economical, low-manned operation. WEKAL WPA portal system • 2-axis portal system • X-beam 7,000 mm • X-travel approx. 5,500 mm • Z-travel approx. 1,800 mm • WRB roller conveyor conveying length 10,000 mm • 20 workpiece carriers • Robot gripper module with quick-change system Machine equipment • Siemens ShopTurn • ProfiNet • Touchscreen • DXF reader • Network drive management • Geared spindle 22/18.5 kW • 2,500 rpm • Y-axis ±60 mm • Counter spindle • Driven tools 5,000 rpm • Torque upgrade Fedpfx Akszhltcjmegi • High-pressure cooling • Oil mist extraction • Chuck flushing • Chuck blow-out • Stroke monitoring • Automatic door drive • Robot interface Documentation and condition The system is in like-new and fully functional condition. • complete documentation available • ongoing maintenance including records • manufacturer's warranty until 03/26/2027, transferable after coordination with the manufacturer • short-term availability The system can be inspected while powered on. Extensive accessories available (chuck jaws, gripper jaws, tool holders, driven tools, etc.) Training and instruction possible. Programming and setup of your components possible. Sale ex works. Buyer organizes disassembly, loading and transport.

Condition: excellent (used), For sale: Professional vacuum lifter EXpressO Balance Greifer, manufactured in Germany. The device is designed for lifting and transporting flat elements using vacuum technology. The unit is equipped with a PIAB system and four suction cups, ensuring stable and secure gripping of materials. Ideal for industrial applications such as handling glass panes, sheet metal, panels, and other flat components. Technical Specifications Manufacturer: EXpressO Deutschland GmbH Model: Balance Greifer Load capacity: 20 kg Year of manufacture: 2012 Article number: 060BLV114110 Vacuum system: PIAB Number of suction cups: 4 Connections: G1 2 Vacuum manometer Fedsz Sltwjpfx Akmjgi Condition The device is in very good technical condition Visible normal signs of use Complete as shown in the photos Applications glass and window handling sheet metal and panel transport warehouses and production production lines Included in the set complete vacuum lifter control handle pneumatic installation

Year of construction: 1977, condition: used, Gripper feed for eccentric press, single column press, punching machine, single column eccentric press, eccentric press, single column press -Manufacturer: Raster, collet feed from punching machine type HR 60 NL-4S -Stroke: mm -Dimensions: see photos -Transport dimensions: 900/640/H620 mm -Weight: 200 kg Fodpfx Akjtigw Nsmegi

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, Equipment: documentation/manual, We are offering a complete, integrated robotic CNC turning cell consisting of two DOOSAN vertical CNC turning centers and one KAWASAKI ZX-165U industrial robot. The machines and robot are exceptionally well preserved, regularly maintained and currently operating in our production facility in a two-shift environment. The robotic cell enables automated workpiece handling, loading and unloading between the CNC machines. This is an opportunity to acquire an existing production automation system rather than sourcing individual machines and commissioning a new integration. 1. Complete cell – Included equipment • 1 × DOOSAN VT450TM-2SP CNC turning center • 1 × DOOSAN VT750TM-2SP CNC turning center • 1 × KAWASAKI ZX-165U industrial robot and robot control cabinet • Installed robot gripper / workpiece handling equipment • Safety fencing and protective enclosure • Robot-to-machine communication interfaces • Associated electrical and pneumatic automation components • Workpiece handling / storage stations and chip conveyors 2. Condition, inspection and advantages Both CNC machines and the Kawasaki robot are fully operational, regularly maintained and currently used in our manufacturing facility in Slovenia. The complete cell can be inspected under power and demonstrated during production by prior appointment. Fgsdpfxoz Rqqqj Akmoi • Complete, existing robotic CNC turning solution • Two heavy-duty Doosan vertical turning centers with FANUC CNC controls • Driven tools and C-axis on both machines • Automated workpiece handling and reduced manual intervention • Excellent condition; regularly maintained • Live inspection and test run available 3. Typical applications Automated machining of flanges, bearing rings, gear components, housings, brake discs, large rotational components and other medium- to heavy-duty industrial workpieces, including steel and cast-iron parts. 4. Sales information The complete robotic cell is offered for sale as one integrated system. Additional photographs, video and technical information are available upon request. Inspection and test run by appointment

Condition: ready for operation (used), Year of construction: 2012, Professional automatic machine for rinsing glass and plastic bottles using filtered water. Manufacturer: WAB s.r.l. (Italy) Model: ADV R00 R1 8-40-110-110 Number of grippers: 40 pcs Output: approx. 8,000 bph Stroke: 110 mm Fgjdpfoyxxayex Akmei Control: Siemens PLC Year of manufacture: 2012 Technical condition: Used machine, regularly serviced, fully operational at the time production was stopped.