Used Gripper for sale (710)

Condition: good (used), Year of construction: 2006, TECHNICAL DATA Main drive Speed: Infinitely programmable: 18`000 rpm In set-up mode: 20 - 800 rpm Work spindle: Hollow shank taper: HSK-A63 Tool clamping: Hydraulic Feed drive Linear motor: X-axis AC servomotors: C, B, Y, Z Podpfxsu Hkb Ro Adysgu Feed speed X, Y, Z: Up to 20`000 mm/min Rapid traverse Y, Z: 50 m/min X: 80 m/min B: 40 rpm C: 50 rpm Position measuring system Resolution: C, B, X, Y, Z: 0.001 mm Position tolerance: C, B, X, Y, Z: 0.010 mm Working range X-axis: 500 mm Y-axis: 450 mm Z-axis: 400 mm B-axis: 0° to 161.955 ° C-axis: n x 360 ° Tool changer with double gripper Magazine slots: 120 Max. Tool diameter without free spaces: 80 Max. Tool diameter with free spaces: 130 Max. Tool length from spindle nose: 300 mm Max. Tool weight: 6 kg NC rotary table with swivel axis C-axis: Clamping surface rotary axis (mm): 500 x 380 mm Distance of T-slots / size: 63 / 14 H7 Centering bore: 30 H6 Max. Torque: 1491 Nm Max. Rotation of the table top: 50 rpm B-axis: Max. Swivel torque: 1864 Nm Swivel speed: 40 rpm Swivel range: 0° - 161.955 ° Input and display precision: 0.001 ° Weight: 420 kg Max. load: 200 kg Weight: Approx. 6800 kg Installation weight: Approx. 7500 kg Dimensions: 4170 x 3133 x 2560 mm SCOPE OF OFFER U.A: (list not exhaustive): Deckel Maho DMU 50 Evo CNC machining center Heidenhain iTNC 530 Tool breakage control Blum measuring probe Oil mist separator Fire extinguishing system High-pressure pump and belt filter system Chip conveyor Exact scope of supply according to photo gallery We assume no liability for the accuracy, completeness and up-to-dateness of the information provided

Condition: used, machine/vehicle number: 006645, Max. panel width: 5600 mm Max. panel length: 2850 mm Pjdpfjv Ir Scox Adyegu Main saw blade projection: 125 mm No of Grippers: 11

Condition: reconditioned (used), Year of construction: 2015, Refurbished RAS MiniBendCenter 79.05 Technical data Board length: 50–600 mm Board width: 40–600 mm Sheet thickness max. (400 N/mm²) depending on tool: 3,0 mm Upper cheek stroke max: 500 mm Smallest leg height Standard value depends on tool: 5 mm x s Maximum leg height: 127 mm Weight of bending cell: 10 tons Weight of cladding and electrics: ca. 2027 kg Weight of machine elements: ca. 945 kg Motor operation: 400V, 50/60 Hz, 3-Ph Year of construction: 2015 Condition: refurbished—good used condition Bending cell: Automatic sheet thickness adjustment Automatic tool clamping Blank scanner Main manipulator: 3 servomotors for X,Y,Z 1 servo motor for lower rotary axis + separate drive for rotary axis Double sheet detection Tool changer: 3 servomotors for X,Y,Z 1 pneum. Swivel drive for rotary axis Tool gripper Tool magazine on 2 levels Automatic tool clamping in the tool magazine Cladding: Bending cell front and rear Movable control panel: 18" Touch & More control unit Pallet station: Roller conveyors and heavy-duty chain conveyors 1 space for new pallets (parts that are being processed) 1 space for "pallet in process" 2 spaces for finished pallets (empty or with remaining quantity) Additional equipment: Intelligent charging robot Combined camera-scanner system Analysis software Transfer table, Sauerfeld (52x9mm) suction cup series (7x20mm) Conveyor curve belt with 6 connection stations Cladding finished part output Complete tool set RAS CAM-Office software incl. SolidWorks license and maintenance contract for 2 years This high-quality used RAS MiniBendCenter 79.05 offers you proven quality at an attractive price and is available directly from the manufacturer. It is a fully automatic bending center specifically designed for the efficient processing of small parts. It comes with a manufacturer's warranty, maintenance included, and the latest software version. With advanced technology such as automatic sheet thickness adjustment, an intelligent loading robot, and a powerful control system, it optimizes your production and reduces costs. Benefit from high flexibility and fast amortization through automated processes and versatile configuration. Psdpjxlgrbjfx Adyogu

Condition: used, functionality: fully functional, Manufacturer: TORNOS Type: DECO 2000/07 Year: 1996 Machine no.: T 62136 Country: Switzerland Specifications: Max. capacity in collet: 7 mm Control: FANUC 16 T-B Hour counter, machine powered on: 24,095 hours Equipped with: Collet clamping device Bar feeder magazine Full C axis Workpiece gripper Tool holders Coolant system Operator keys, etc. Podpfxoxq D Svo Adyjgu

Condition: used, Year of construction: 1999, Sarcmi–Simonazzi Bluestar 90/15H p.110 Rinser -Filler–Capper Monoblock – Full Overview with new capper turret YOM 2026 This rotary isobaric Rinser–Filler–Capper Tribloc is a second‑hand, reconditioned solution engineered for PET beverage production. Built in 1999 and fully revised in 2025/2026, it features a brand‑new Adroit capping turret and Siemens automation. Designed for still water and carbonated soft drinks, the unit combines high throughput with precise counterpressure filling, making it ideal for modern industrial packaging plants and used bottling line upgrades. Technical Specifications & Performance Data General machine data Type: Rotary Tribloc with starwheel transfer (rinser–filler–capper) Working direction: Counterclockwise Container material: PET Current format: 2,000 ml square bottle Machine pitch: 110 mm Maximum container height: 350 mm Nominal speed: up to 24,000 bph (reference 2.0 L) Hot fill: No | Aseptic: No CO2 system: Yes (isobaric/counterpressure filling) Work table height: 1,100 mm Approx. dimensions: 8,000 × 5,600 × 2,500 mm Approx. weight: 7,500 kg Year of manufacture: 1999 | Major revision: 2025/2026 Rinser Brand: Simonazzi 100 grippers/clamps Filler Technology: Isobaric rotary filler (counterpressure with CO2) Number of filling valves: 90 Optimized for: Still water and soft drinks (CSD) Capper New capping turret: Adroit (installed during 2025/2026 overhaul) Number of capping heads: 15 Cap feeder: 2017 Utilities & electrical Power supply: 380 V – 3 Ph – 50 Hz Pedpfx Adjxnk U Sjysgu Installed power: 23 kW Compressed air: 6 bar Advanced Automation & Control Systems PLC: Siemens S7 HMI: Siemens operator panel for recipe management, diagnostics and format change support Process control: Counterpressure filling with CO2 for stable performance on carbonated beverages Documentation: Operation and maintenance manuals available The Siemens control architecture supports consistent cycle synchronization across rinser, filler, and capper, enhancing uptime in second‑hand industrial packaging environments. Production Line Integration Capabilities Upstream/downstream interfaces for conveyors in a used bottling line Starwheel transfer aligned to 110 mm pitch for format handling Compatible with PET bottle supply from depalletizer or blow molder (not included) Cap handling via dedicated feeder (2017) to the new Adroit turret Typical connections: CO2 line for counterpressure, product feed, CIP return/supply, air and electrical This Tribloc is well suited for beverage production plants seeking a compact rinser–filler–capper block to increase capacity or replace legacy equipment while maintaining high line efficiency.

Condition: used, Year of construction: 2015, functionality: fully functional, Equipment: chip conveyor, Vertical Machining Center Wele (Toyoda) FV1165 Standard machine configuration: - FANUC 0iM CNC control with 10.4-inch LCD color display - AC digital FANUC main spindle and axis motors - Tool holder DIN 69871 A40 - Main spindle speed range 50 – 8,000 rpm, two-stage gearbox - Spindle drive power 18.5/15 kW - Travel X-axis: 1,100 mm - Travel Y-axis: 650 mm - Travel Z-axis: 600 mm - Table size: 1,300 x 650 mm - Rapid traverse X / Y axis: 30 m/min - Rapid traverse Z axis: 24 m/min - Double-supported, pre-loaded ball screws in X / Y / Z axis - Through-spindle coolant Form A - Additional coolant tank with two switchable filter cartridges and a 20 bar high-pressure pump - Number of tool magazine stations: 40 - Tool change time: 3 sec. (double gripper) - Cast iron construction Psdpow Smdxsfx Adyjgu - Large dimension box guideways in X / Y / Z axis - Fully enclosed work area with workspace lighting - Chip conveyor parallel to X axis - 3-color signal lamp (red/yellow/green) - 1 set of machine documentation - CE specification - Finished in TOYODA colors silver/grey - Manual Guide i Space requirements approx. 3,200 x 2,240 x 2,940 mm Machine weight approx. 7.2 t - Air blast through spindle in addition to internal coolant supply, controlled by separate M function Technical data subject to change. Scope of delivery is strictly limited to the textual description of the article. There is expressly no claim to any additionally illustrated accessories – e.g. those used for demonstration purposes. The machine is sold without warranty or guarantee. The General Terms and Conditions of JS-Werkzeugmaschinen GmbH apply.

Condition: new, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 1,500 mm, rapid traverse X-axis: 30,000 m/min, rapid traverse Y-axis: 30,000 m/min, rapid traverse Z-axis: 30,000 m/min, position of the milling head: Universal-Diagonal-Fräskopf, spindle speed (max.): 6,000 rpm, table width: 1,100 mm, table load: 10,000 kg, table length: 3,100 mm, overall weight: 27,000 kg, torque: 1,178 Nm, spindle motor power: 53 W, Equipment: rotational speed infinitely variable, BRAND NEW BED TYPE MILLING MACHINE WITH INTEGRATED ROTARY TABLE Control and Motors: HEIDENHAIN TNC 640 digital path control HEIDENHAIN package (motors, measurement systems, and handwheel) Podom Tv Iijpfx Adysgu Integrated rotary table: Ø 1,000 mm ICS: Internal coolant supply - 36 bar Additional equipment: Standard tool changer with double gripper, 40 stations Double hinged belt chip conveyor (longitudinal), one at the front and one at the rear Peripheral enclosure Accuracies: Positioning accuracy: 0.015 mm Repeatability: 0.008 mm Only inquiries from Germany will be answered // Only inquiries from Germany will be processed

Condition: used, machine/vehicle number: 007618, Max. panel width: 4400 mm Max. panel length: 4400 mm Main saw blade projection: 72 mm Pjdpfxsu N Slie Adyogu No of Grippers: 6

Condition: used, Year of construction: 2007, functionality: fully functional, Cutting width 4300 mm (4450 mm) cutting depth 2600 mm cutting height 150 mm Pgedpfowg Avzsx Adysu back loaded + rotation table + air cushion table at cutting line motor 18 kw sawblad Ø520 mm scorringblade Ø200 mm 12 pcs grippers on the pusher MACHINE AVAILABLE FROM WEEK 46/2025 price is EX factory

Condition: good (used), Year of construction: 2010, functionality: fully functional, DMG DMC 1035 V Year of manufacture: 2010 Control: Siemens 840 D Shop Mill Power-on hours: 32,921 h Program run hours: 11,517 h TECHNICAL DATA Travel range X-axis (longitudinal): 1035 mm Y-axis (transverse): 560 mm Z-axis (vertical): 510 mm Table working area: 1200 x 560 mm 4 T-slots: H12/100 mm 1 alignment slot: 14 H7 mm Max. table load: 1000 kg Drive power (40/100% duty cycle): 13/9 kW Torque (40/10% duty cycle): 83/57 Nm Spindle speed range: 20 – 10,000 rpm Tool holder (DIN 69871-1): SK 40 A Feed rate range (X, Y, Z): up to 20,000 mm/min Rapid traverse (X, Y, Z): 25 m/min Tool changer with double gripper Chain magazine Magazine positions: 30 Max. tool diameter: 80/130 mm Max. tool length: 300 mm Max. tool weight: 6 kg Operating voltage: 400 V / 50 Hz Total connected load: 25 kVA Max. main fuse: 35 A Machine dimensions (W x D x H): 2.52 x 2.5 x 2.6 m Installation area: 6.9 x 5.4 m Machine weight: 4500 kg EQUIPMENT / ACCESSORIES - Chip and splash protection enclosure with sliding door, electrically safeguarded and workplace lighting Podpfewwt Naex Adyjgu - Automatic tool changer (double gripper/chain magazine) ATC 30 - Central lubrication - Spindle lubrication - Heat exchanger (working spindle) - Coolant/lubricant filtration system, 600 l, 20 bar belt filter - ICS – internal coolant supply through the tool - Switching from coolant to compressed air blow-off - Rinsing gun - Rotating inspection window - Chip conveyor with coolant reservoir - Infrared probe TS 649 - Tool measurement TT 140 - Electrical cabinet cooling - 4-color signal tower - Mounting elements - Documentation Condition: Good, predominantly used for aluminum machining

Condition: used, Year of construction: 1999, functionality: fully functional, Cutting height / blade projection: 115 mm Main / scoring blade diameter: 400 / 160 mm Main / scoring blade speed: 3900 / 6300 rpm Main motor power: typically 15 kW (depending on configuration, 9/11/15/18 kW available) Scoring motor power: approx. 1.8 kW Number of grippers: 7 Pedpoxq Hhtsfx Adysgu Front air-cushion tables; scoring unit included as standard Machine dimensions (approx.): 5000 × 7500 × 1800 mm Machine weight (approx.): 8000 kg Our machine variant is equipped with a loading platform.

Condition: refurbished (used), Year of construction: 2024, Saw blade solid carbide / HSS: max. 425 mm Drive power: - Two-stage with chain: 1.7/2.6 kW, - Two-stage with belt pulley: 3.7/4.5 kW Cutting speed saw blade (400 mm): - two-stage with chain: 10/20 m/min, 13/26 m/min, 15/30 m/min - two-stage with belt pulley: 20/40 m/min, 30/60 m/min Infinitely variable saw speed control fully electronic Working range square 90° max.:120 x 120 mm 45° max: Working range flat: 90° max.:230 x 80 mm Psdpfxeuiy Sbo Adyegu 45° max: Working range round: 90° max.: 140 mm 45° max: Feed length single stroke:5-2000 mm Multiple stroke:5-9999 mm Feed speed AC servo max.: 500 mm/s Weight approx.:3600 kg Dimensions LxWxH:3500mm x 1300mm x 2100mm Installation area LxW: 3500mm x 1300mm Technical description Kaltenbach KKS 401/ KKS 451 NA 2000 Retrofit Kaltenbach KKS 401/ KKS 451 Retrofit High-performance automatic saw for steel. Thanks to its equipment and design, the machine can be used very efficiently for a wide range of applications. The HMI interface for controlling the machine ensures simple and trouble-free operation of the system. Due to the design of the sawing system, it is possible to realize a very precise length tolerance. The machine is generally overhauled in our company at the customer's request. Among other things, the following points will be renewed: - Conversion to Siemens S7 PLC control - Conversion to Siemens HMI operating panel - Replacement of the ball screw - Replacement of servo motor and servo inverter - Replacement of the frequency converter for the main saw drive - New electronic components - Maintenance or replacement of all hydraulic cylinders and valve terminals - Optimization and overhaul of the cooling system - Replacement of general wear parts - Overhaul of the machine body The machine also features - Fully automatic feed - Fully automatic miter adjustment +/- 60° Warranty: Unless otherwise agreed, we guarantee our machines for 6 months on all parts overhauled or replaced by us. Working time and wearing parts are excluded from the guarantee. Optional: - Scraper - Chain magazine for 6m materials - Removal gripper system for sorting the cut-off pieces - Removal gripper system for sorting the cut-off pieces and realizing a multiple recut at the end of the workpiece - Delivery and installation on your premises - Training of your employees

Condition: new, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 1,500 mm, rapid traverse X-axis: 30,000 m/min, rapid traverse Y-axis: 30,000 m/min, rapid traverse Z-axis: 30,000 m/min, position of the milling head: Universal-Diagonal-Fräskopf, spindle speed (max.): 6,000 rpm, table width: 1,200 mm, table load: 6,000 kg, table length: 1,600 mm, torque: 1,178 Nm, power: 31 kW (42.15 HP), Equipment: rotational speed infinitely variable, BRAND NEW BED TYPE MILLING MACHINE WITH ROTARY TABLE Control and Motors: HEIDENHAIN TNC 640 CNC control system HEIDENHAIN package (motors, measuring systems, and handwheel) IKZ: Internal coolant supply – 36 bar Rotary Table: 1600 x 1200 mm – dual motor drive system Additional Equipment: Standard tool changer with double gripper, 40 stations Psdpfx Ajff Hz Hodyegu Double hinged belt chip conveyor (longitudinal), one at the front and one at the rear Full perimeter enclosure Accuracies: Positioning accuracy: ± 0.015 mm Repeatability: ± 0.008 mm Only inquiries from Germany will be answered.

Condition: used, machine/vehicle number: 006006, Max. panel width: 2300 mm Max. panel length: 4300 mm Main saw blade projection: 135 mm No of Rip saw Grippers: 7 No of Cross Cut Grippers: 20 Psdpou Rv Uqefx Adyjgu Second flexible pusher: yes Panel Rotation Station: yes

Condition: ready for operation (used), Year of construction: 2022, operating hours: 100 h, Movement X-Axis Movement 508 Y-Axis Movement 305 Z-Axis Movement 406 Podpfx Adoxgwdqoyegu Additional Equipment CT-style tool changer grippers / Standard program memory, 1GB / Spindle speed: 6000 rpm / Convenience Package / Early power failure detection module / Ethernet interface / HaasConnect: Remote monitoring / HaasDrop / Lifting device / User-definable macros / M-code for media playback; M130 / Run in safe mode / Standard 1-year warranty / Tool changer with 10-position carousel / Touchscreen control / Visual part programming system / Wi-Fi connection for the Haas control / Work light / Spindle orientation / Coordinate rotation and scaling / Internal high-voltage non-isolated transformer for 380-480V operation; Non-USA WIPS-R Wireless Intuitive Probe System / AAG Automatic Air Cooling System+ / AUGER Auger Chip Conveyor / AUTO LUBE Automatic Lubrication System / CPH-HF High-Flow Coolant Pump / MIN QTY LUBE Minimum Oil Lubrication System+ / P-COOL Programmable Coolant Nozzle+ / PULSEJET PulseJet System+ / RJH-TOUCH-XL Large Jog Handle with Remote Control and Touchscreen Display+ / RTAP-3 Synchronized Tapping+ / FIO Installation Field Installed Options with+ This 3-axis HAAS TM-0P was manufactured in 2022. It features a 508 mm X-axis, 305 mm Y-axis, and 406 mm Z-axis travel, ensuring versatile machining capabilities. Standard features include a 6000 rpm spindle, 10-position carousel tool changer, and touchscreen control. Additional accessories like the Wireless Intuitive Probe System and Auger Chip Conveyor enhance its functionality. If you are looking to get high-quality milling capabilities consider the HAAS TM-0P machine we have for sale. Contact us for more information. Application Types Milling

Condition: used, Year of construction: 2012, • Axes: 6 • Maximum payload: 180 kg • Reach: 2550 mm • Repeatability: ± 0.07 mm • Mechanical weight: approx. 1,310 kg • Maximum wrist torque: approx. 961 Nm • Protection rating: IP67 (entire robot) • Mounting: floor-mounted • Controller: IRC5 (single or dual cabinet) • Power supply: 200–600 V, 50/60 Hz • Power consumption (ISO-Cube): approx. 2.7 kW Machine/asset does not include any product-related tool/fixture or gripper (robot). Pgedpfxexgqfbe Adyju

Condition: new, travel distance X-axis: 6,000 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 2,000 mm, position of the milling head: Universal-Diagonal-Fräskopf, rapid traverse X-axis: 30,000 m/min, rapid traverse Y-axis: 30,000 m/min, rapid traverse Z-axis: 30,000 m/min, spindle speed (max.): 6,000 rpm, pivoting range: 1 °, table length: 7,500 mm, table width: 1,100 mm, torque: 1,178 Nm, table load: 42,000 kg, coolant supply: 36 bar, spindle motor power: 53 W, Equipment: rotational speed infinitely variable, BRAND NEW FLOOR TYPE MILLING MACHINE Pgedsvrv Sujpfx Adysu Controls and Motors: Two HEIDENHAIN TNC 640 digital CNC controls (one at the front of the machine, one at the rear in the cabin) HEIDENHAIN package (motors, measuring systems, and handwheel) Additional equipment: Tool changer with double gripper, 60 positions Dual hinged belt chip conveyor (longitudinal), one at the front and one at the rear Accuracies: Positioning accuracy: ±0.040 mm Repeatability: ±0.008 mm Only inquiries from Germany will receive a response // Only inquiries from Germany will be processed

Condition: used, machine/vehicle number: 005552, Max. panel width: 2200 mm Max. panel length: 4300 mm Main saw blade projection: 125 mm No of Grippers: 10 Pgsdsm Tnbwjpfx Adyju

Condition: new, travel distance X-axis: 6,200 mm, travel distance Y-axis: 2,600 mm, travel distance Z-axis: 1,200 mm, feed rate X-axis: 10,000 m/min, feed rate Y-axis: 20,000 m/min, feed rate Z-axis: 15,000 m/min, table length: 6,000 mm, table width: 2,400 mm, spindle speed (max.): 6,000 rpm, table load: 19,000 kg, position of the milling head: vertikal, torque: 1,350 Nm, spindle nose: SK 50, spindle motor power: 53 W, warranty duration: 12 months, Equipment: rotational speed infinitely variable, Control system and motors: HEIDENHAIN TNC 640 digital path control HEIDENHAIN package (motors, measuring systems, handwheel) IKZ: Internal coolant supply, 70 bar Additional equipment: Pjdpehy Avtefx Adyogu Tool changer with double gripper, 60 positions Double auger conveyor (longitudinal) Hinged belt chip conveyor (crosswise) Preparation for 4th axis (rotary table) Full enclosure, top closed Accuracies: Positioning accuracy: 0.045 mm Repeatability: 0.030 mm Only inquiries from Germany will receive a response

Condition: used, machine/vehicle number: 008149, Max. panel width: 3800 mm Max. panel length: 3800 mm Pedpfx Adsw Tivysyogu Main saw blade projection: 55 mm No of Grippers: 6

Condition: used, machine/vehicle number: 005445, Max. panel width: 3200 mm Max. panel length: 2120 mm Main saw blade projection: 165 mm Pedpjiiiuyefx Adyjgu No of Rip saw Grippers: 4 No of Cross Cut Grippers: 9 Panel Rotation Station: yes Thin sheet loading: yes

Condition: used, machine/vehicle number: 007470, Max. panel width: 3800 mm Max. panel length: 2200 mm Pgsdpfx Aet H Twajdysu Main saw blade projection: 130 mm No of Grippers: 7

Condition: used, machine/vehicle number: 007538, Max. panel width: 4300 mm Max. panel length: 4300 mm Main saw blade projection: 80 mm Pgsdpfxsuwzupe Adysu No of Grippers: 8

Condition: used, machine/vehicle number: 007671, Max. panel width: 3800 mm Max. panel length: 3800 mm No of Grippers: 7 Pgodpfxewuufde Adyju

Condition: used, machine/vehicle number: 006211, Max. panel width: 4300 mm Max. panel length: 2200 mm Main saw blade projection: 135 mm No of Grippers: 10 Second flexible pusher: yes Psdjiwbfuopfx Adyogu Panel Rotation Station: yes