Used Gripper for sale (732)

Condition: used, machine/vehicle number: 006211, Max. panel width: 4300 mm Fpsdpfxsiwbfuo Ah Ujp Max. panel length: 2200 mm Main saw blade projection: 135 mm No of Grippers: 10 Second flexible pusher: yes Panel Rotation Station: yes

Condition: used, Year of construction: 2012, • Axes: 6 • Maximum payload: 180 kg • Reach: 2550 mm • Repeatability: ± 0.07 mm • Mechanical weight: approx. 1,310 kg • Maximum wrist torque: approx. 961 Nm • Protection rating: IP67 (entire robot) • Mounting: floor-mounted • Controller: IRC5 (single or dual cabinet) • Power supply: 200–600 V, 50/60 Hz • Power consumption (ISO-Cube): approx. 2.7 kW Machine/asset does not include any product-related tool/fixture or gripper (robot). Fpedoxgqfbopfx Ah Uop

Condition: used, Year of construction: 2007, functionality: fully functional, Cutting width 4300 mm (4450 mm) cutting depth 2600 mm cutting height 150 mm back loaded + rotation table + air cushion table at cutting line motor 18 kw sawblad Ø520 mm scorringblade Ø200 mm 12 pcs grippers on the pusher Fsdowg Avzspfx Ah Uepp MACHINE AVAILABLE FROM WEEK 46/2025 price is EX factory

Condition: used, Year of construction: 2015, functionality: fully functional, Equipment: chip conveyor, Vertical Machining Center Wele (Toyoda) FV1165 Standard machine configuration: - FANUC 0iM CNC control with 10.4-inch LCD color display - AC digital FANUC main spindle and axis motors - Tool holder DIN 69871 A40 - Main spindle speed range 50 – 8,000 rpm, two-stage gearbox - Spindle drive power 18.5/15 kW - Travel X-axis: 1,100 mm - Travel Y-axis: 650 mm - Travel Z-axis: 600 mm - Table size: 1,300 x 650 mm - Rapid traverse X / Y axis: 30 m/min - Rapid traverse Z axis: 24 m/min - Double-supported, pre-loaded ball screws in X / Y / Z axis - Through-spindle coolant Form A - Additional coolant tank with two switchable filter cartridges and a 20 bar high-pressure pump - Number of tool magazine stations: 40 - Tool change time: 3 sec. (double gripper) - Cast iron construction - Large dimension box guideways in X / Y / Z axis - Fully enclosed work area with workspace lighting - Chip conveyor parallel to X axis - 3-color signal lamp (red/yellow/green) - 1 set of machine documentation - CE specification - Finished in TOYODA colors silver/grey - Manual Guide i Space requirements approx. 3,200 x 2,240 x 2,940 mm Machine weight approx. 7.2 t Fpjdpjw Smdxsfx Ah Usp - Air blast through spindle in addition to internal coolant supply, controlled by separate M function Technical data subject to change. Scope of delivery is strictly limited to the textual description of the article. There is expressly no claim to any additionally illustrated accessories – e.g. those used for demonstration purposes. The machine is sold without warranty or guarantee. The General Terms and Conditions of JS-Werkzeugmaschinen GmbH apply.

Condition: used, Year of construction: 1982, machine/vehicle number: 105981, Press capacity: 45 ton Ram stroke adjustable: 20 - 80 mm Slide adjustment: 50 mm Shut height (stroke down, adjustment up): 300 mm Free frontal opening L-R: 710 mm Table surface area : 700 x 450 mm Slide area: 700 x 360 mm Hole in table: 600 x 100 mm Number of strokes: 80 - 400 s.p.m. Required power: 10 kW Fpsdpfx Asuqc Ngeh Uep Height over floor approx.: 2900 mm Weight of machine approx.: 7,2 ton Control: Siemens S7 Standard configuration With gripper feedMachine was completely overhauled in 2001 with SIEMENS S7 control.

Condition: used, Year of construction: 2025, For inquiries regarding the attachment, Mr. Herden will be happy to assist you (by phone at ...). Westtech Woodcracker CS610 compact / incl. Power-Tiltator / incl. MS10 adapter plate / Year of manufacture: 2025 / DEMO unit / immediately available / excellent condition! Price: €39,990.00 net / €47,588.00 gross - Cutting diameter: 610 mm - Gripper opening width: 1,280 mm - Own weight (basic to fully equipped): 830 – 1,060 kg - Recommended hydraulic flow rate: 65 – 110 l/min - Recommended auxiliary flow rate: 40 – 60 l/min - Recommended operating pressure: 230 – 280 bar - Carrier vehicle service weight: 15 – 20 t - Saw box: actively suspended Fpjdpfx Ajxq H Uash Ujp - Saw chain lubrication: grease Equipment: - incl. Power-Tiltator - incl. MS10 adapter plate We have a wide range of additional adapter plates in stock (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc.) and immediately available. In our warehouse, we offer a very large selection of various Westtech products, all available immediately! Mr. Herden (phone: ...) will be happy to assist you. If required, we can also provide a financing offer. We are an official Westtech sales and service partner. We are an official Gierking GMT sales and service partner. We are an official OilQuick sales and service partner. We are an official Weber MT sales and service partner. We are an official Holp sales and service partner. We are an official DMS sales and service partner. We are an official Seppi M. sales and service partner. We are an official Magni Telehandler sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. Additionally, with over 800 used vehicles in stock, we are one of the largest commercial vehicle dealers in Germany. We supply the complete Westtech Woodcracker range for you! Errors and prior sale excepted! Internal reference no.: 422068

Year of construction: 2010, condition: like new (used), I sell the panel beam saw SCM Sigma Prima 67. Year 2010. Cutting size 3300x3200mm. Cutting height 67mm. Max saw blade diameters 320 + 160mm Main motor 7,5kW Scoring motor 1,3kW Total power 10kW Total area covered W.5400mm x D.7000mm 8 pcs. gripper with pneumatic regulation Side alignment top roller with pneumatic stroke. WinCut optimising software included. Label printing included. Software Ottimo Perfect Cut included. Very good condition. Available immediately. Fedpfx Ahoi Evbzs Uspp

Condition: good (used), Year of construction: 2012, load capacity: 235 kg, arm reach: 2,550 mm, The IRB 6640 serie is ABB Robotics latest generation of high payload, high performance industrial robots. With a focus on high production capacity, compact design and low weight, simple service and low maintenance cost. The IRB 6640 is ideal for process applications, regardless of industry. Typical areas are for example Spot Welding, Material Handling and Machine Tending. Year: 2012 (Multiple options available) Fedpfx Ahoqz Txqo Uspp Cabinet: IRC5 Teach Pendant: Included Signalling & Power Cables: Included (15m) Gripper: NOT included Please contact us for a quote and also the refurbishment options. As PLC Merkezi EOOD, we have more than 300 robots in our inventory and deal with the brand of KUKA, ABB, FANUC and Motoman. (Source: ABB's Website)

Condition: used, Year of construction: 1999, functionality: fully functional, Cutting height / blade projection: 115 mm Main / scoring blade diameter: 400 / 160 mm Fpodexq Hhtspfx Ah Ujp Main / scoring blade speed: 3900 / 6300 rpm Main motor power: typically 15 kW (depending on configuration, 9/11/15/18 kW available) Scoring motor power: approx. 1.8 kW Number of grippers: 7 Front air-cushion tables; scoring unit included as standard Machine dimensions (approx.): 5000 × 7500 × 1800 mm Machine weight (approx.): 8000 kg Our machine variant is equipped with a loading platform.

Condition: refurbished (used), Year of construction: 2024, Saw blade solid carbide / HSS: max. 425 mm Drive power: - Two-stage with chain: 1.7/2.6 kW, - Two-stage with belt pulley: 3.7/4.5 kW Cutting speed saw blade (400 mm): - two-stage with chain: 10/20 m/min, 13/26 m/min, 15/30 m/min - two-stage with belt pulley: 20/40 m/min, 30/60 m/min Infinitely variable saw speed control fully electronic Working range square 90° max.:120 x 120 mm 45° max: Working range flat: 90° max.:230 x 80 mm 45° max: Working range round: 90° max.: 140 mm 45° max: Feed length single stroke:5-2000 mm Multiple stroke:5-9999 mm Feed speed AC servo max.: 500 mm/s Weight approx.:3600 kg Dimensions LxWxH:3500mm x 1300mm x 2100mm Installation area LxW: 3500mm x 1300mm Technical description Kaltenbach KKS 401/ KKS 451 NA 2000 Retrofit Kaltenbach KKS 401/ KKS 451 Retrofit High-performance automatic saw for steel. Thanks to its equipment and design, the machine can be used very efficiently for a wide range of applications. The HMI interface for controlling the machine ensures simple and trouble-free operation of the system. Due to the design of the sawing system, it is possible to realize a very precise length tolerance. The machine is generally overhauled in our company at the customer's request. Among other things, the following points will be renewed: - Conversion to Siemens S7 PLC control - Conversion to Siemens HMI operating panel - Replacement of the ball screw - Replacement of servo motor and servo inverter - Replacement of the frequency converter for the main saw drive - New electronic components Fpsdpfjuiy Sbsx Ah Ujp - Maintenance or replacement of all hydraulic cylinders and valve terminals - Optimization and overhaul of the cooling system - Replacement of general wear parts - Overhaul of the machine body The machine also features - Fully automatic feed - Fully automatic miter adjustment +/- 60° Warranty: Unless otherwise agreed, we guarantee our machines for 6 months on all parts overhauled or replaced by us. Working time and wearing parts are excluded from the guarantee. Optional: - Scraper - Chain magazine for 6m materials - Removal gripper system for sorting the cut-off pieces - Removal gripper system for sorting the cut-off pieces and realizing a multiple recut at the end of the workpiece - Delivery and installation on your premises - Training of your employees

Condition: used, Year of construction: 2012, functionality: fully functional, The plant comprises the following components: Fedpfexrcc Aox Ah Ujpp  Platform with a vibrated base for the bin support; this platform is protected by perimeter railings and is accessed via a ship-type ladder;  Empty bag magazine; the supply of empty bags is performed manually by the operator. The exact position of the bags is secured by adjustable side guides; a sensor located under the stack of bags signals when the pile is depleted;  On the structure of the empty bag magazine, pneumatic cylinders are installed for gripping the bag, opening its mouth, and inserting it onto the product dosing spout. The bags are handled by a series of suction cups. The pneumatic control panel QP1 is also mounted on the supporting structure of the magazine;  The dosing spout is supported by 3 load cells; at the outlet, a bucket-type gate valve driven by two pneumatic cylinders is installed. Next to it, two additional cylinders with hooks at the ends are used for tensioning the bag mouth.  The bag is clamped along its longer side by two jaws that hold it after filling and guide it to the sewing machine. Movement is achieved by geared motor units and wheels sliding on chrome-plated rods. At this stage, the bag rests on a motorized conveyor belt for transfer; this belt is also raised via a pneumatic cylinder so that the bag rests gently upon filling completion; the height of this belt can be adjusted manually using a handwheel acting on four jacks, to adapt the belt height to the bag type.  Once inserted into the sewing machine, the bag is stitched and the thread cut; still resting on the conveyor, the bag reaches the overturning station—there, it is held by two jaws, rotated 90°, and finally released so as to be parallel to the conveyor.  The next belt features, in its initial part, a series of square rollers for bag straightening, followed by a conveyor belt for forward movement;  Lastly, there is the roller conveyor where the bag is picked up by the robot; this conveyor is stopped by a photocell when the bag reaches the end of the roller line;  The robot gripper is of the comb type and is equipped with a translation cylinder to discharge the bag and two cylinders operating a plate to lock the bag during handling prior to discharge.  Two boxes containing the solenoid valves and vacuum units are installed on the plant;  An electrical control panel manages the entire plant; the operator panel and weighing module are installed on it;  The robot is managed by its own control panel with a dedicated operator interface;

Year of construction: 2013, condition: used, Technical data of the bale opener line for RDF. MSW, paper, cardboard: Manufacturer Cross Wrap Oy Ltd, Siilinjärvi, Finland Type BO 4000 Year of manufacture 2015 Quantity of opened bales 674 pieces Operating time only 3 days, exclusively by running in the entire line during new installation Opening time approx. 45 seconds per bale Bale dimensions (W x H x L) 1100 x 1100 x 1400 - 1900 mm Max. Bale weight 2,000 kg Conveying height of the system 1,400 mm Max. Conveying width of the system 1,200 mm Material to be opened RDF/MSW Availability of the line 98% Noise level of the bale opener line 85 dB(A) Total connected load 37 kW Rated current 125 A Operating display SIEMENS SIMATIC HMI Touch Control SIEMENS S7 ET200S Installation dimensions 8,463 x 2,890 x 3,960 mm (l x w x h) Scope of delivery: Feed conveyor 3,500 x 1,200 x 1,400 mm Feed conveyor to opener 1,500 x 1,200 x 1,400 mm Fjdpfx Aou Tg I Deh Ujpp Bale opener (gripper with knife) Special equipment: Oil heating in hydraulic oil tank Heating in control cabinet Oil cooler in Hydraulic unit Explanation of the short period of use: The entire line of Cross Wrap bale openers type BO 4000 was installed at a municipal waste incineration plant in 2015. The background to the installation was that in the case of a malfunction or maintenance of the incinerator, the municipal waste could continue to be received, baled, wrapped and stored until the malfunction was cleared. Then the bales should all be opened again and the waste fed into the normal incineration process. This worst-case scenario never came to pass. The plant was set up, run in and then never used in regular operation. Only during the commissioning and running-in of the entire plant in 2015 were 674 bales opened on three days. The plant is in very good condition and ready for operation immediately. Due to reconstruction measures in the incineration plant, the installation area of the bale opener was needed. As a result, the entire line is for sale. Short description of the wrapping process: The pressed bales are placed on the infeed conveyor belt from the side or from behind by means of a forklift truck. For opening, the bales must run horizontally to the conveyor belt with the wire or twine binding, otherwise the bales must be turned 90° beforehand. The opening conveyor brings one bale at a time in front of the cutting unit. The grippers hold the wires or twine strapping. The front and rear rotating knives slit the bale lengthwise. Afterwards, the gripper returns to the starting position. The opened bale is now conveyed via the conveyor belt to the discharge chute and then falls onto the following conveyor system. Comments: New price of the completely plant 296.000,- €. The documentation (operating instructions, CE declaration, electrical/hydraulic circuit diagram) is complete. The unit has been dismantled into freight-manageable units, stored and is available for inspection and loading at short notice. We do not accept any liability for the technical details or any errors.

Condition: excellent (used), Year of construction: 2011, Ficep 1003 DZB CNC Drilling / Sawing Line – Year 2011. 3 Spindles. Automatic Tool Changer. Fjdsxmvnuopfx Ah Uopp Scribing. Short Piece Removal. Hard Stamping. Gripper feed. Infeed and Outfeed Cross Transfers. 1000mm Section Capacity.

Condition: used, Year of construction: 2013, x-travel 650 mm y-travel 600 mm z-travel 500 mm Control iTNC 530 Heidenhain turning speeds 18.000 U/min power capacity - main spindel 10 / 15 kW tool taper HSK A 63 rotary table dia. 630 mm center bore 32 H7 Swivel range A: ° rotatable C: 360 ° max. table load 1.000 kg number of toolpositions 32 pos. tool taper HSK A 63 max. tool diameter 80 mm max. tool-dia with free toolbox 125 mm max. tool length 300 mm max. tool weight 8 kg rapid traverse ( X / Y / Z ) 60 m/min Accelaration 10 m/s² feed power 8.500 N total power requirement 43 kVA weight of the machine ca. 9,5 t dimensions of the machine ca. 15 x 7,5 x 3,5 m 5 Axis - CNC Machining Center Universal HERMLE - C 30 U - 2x Hermle C 30 U Linear axes dynamic version 6-fold rotary union Blown air through the center of the spindle Automatic cabin door Rotating transparent window - 1x Kuka KR 180 R2900 prime 6 axes Load capacity: 180 kg Reach: 2,896 mm 66x spaces for workpiece pallets 2x changing places 1x turning station 8x gripper spaces - incl. 1x Schunk gripper - incl. 66x workpiece pallets - incl. 64x HSK 63 holders - incl. 20x collets Also available as a single machine Hermle C 30 U. Fpsdpfx Aheuwv Dlo Ujp

Condition: used, Pneumatic pick & place manipulator, loading unit similar to SCARA robot. Handling device, handling system, placement gripper, loading gripper for automation. Horizontal axis with guided cylinder linear module type CLM 100-H100 (GEMOTEC column module). Vertical axis with guided cylinder linear module type CLM 100-H50 (GEMOTEC column module). Payload: max. 2 kg Horizontal stroke: 100 mm (pneumatic) Vertical stroke: 50 mm (pneumatic) Vertical adjustment on both support columns: 330 mm (manual, with clamping) Support columns, vertical guide column: Ø 55 mm Mounting base: 175 x 90 mm - Pneumatically traversable in two axes with precise linear guidance Fpedpfx Aoxf Ur Aoh Ujp - End position dampers - Mounting plate for tool attachment 55 x 65 mm Required space (L x W x H): 320 x 170 x 550 mm Net weight: 16 kg Very good condition Various manipulators available, see our webshop.

Condition: like new (used), Year of construction: 2008, operating hours: 58,000 h, functionality: fully functional, super well-maintained injection molding machine from clean room (pharmaceutical production) - fully functional with functional guarantee - with GEKU SR 500 ST. linear robot - perfect optical condition Technical data Manufacturer Engel Type e-max 200/100 serial number 170609 Year of construction 2008 Operating hours 58774 h approx. Dimensions L/W/H 4.0 x 1.3 x 1.9 mtr. Weight 3,900 kg Fully functional Condition excellent Clean room Special Control unit CC200 Screw ⌀ 25 mm Injection weight 55 gr./hp Injection pressure 2400 bar Injection volume 59 ccm Clamping force 1000 kN / 100 to. Distance between tie bars 460 x 410 Clamping platens 650 x 600 mm mold mounting height 150-450 mm max distance between platens 800 mm Opening stroke 350 mm Ejector stroke / force 100 mm / 25 kN Clamping unit electric Connected load: 45 KW Fjdpjubamvofx Ah Ujpp Rated current: 69 A The machine is immediately available in our warehouse in Hanover/Germany and has been tested. Extras GEKU Robot SR 500 ST Simotion control X-axis: 600 mm Y-axis: 1400 mm vertical Z-axis: 2500 mm horizontal A-folding axis: SWM 45 C-axis : Servo Gripper: SWS16 B-axis: not available Guarantee Warranty until first commissioning Loading/shipping FCA-free loading on the buyer's truck or free delivery against freight reimbursement from our warehouse in Hanover /Germany Financing On request - installment plan option Price: On request

Condition: used, Year of construction: 2014, Control Unit: R-30 iB This robot operates as a loading and unloading robot in a cell equipped with the Paul Koester leak test (Lot 2770019). Axes: 6 Maximum Payload: 70 kg Reach: 2050 mm Repeatability: ±0.04 mm to ±0.07 mm Motion Range: J1: ±360° J2: ±225° J3: ±440° J4: ±720° J5: ±250° J6: ±720° Maximum Axis Speeds: J1: 160 °/s J2: 120 °/s J3: 120 °/s J4: 225 °/s J5: 225 °/s J6: 225 °/s Mechanical Weight: approx. 560 kg The machine/asset does not include any product-related tool/fixture or gripper (robot). Fodpfx Ahoxgp T Do Uopp

Condition: used, _____ Description: Year of manuf. : 2008 Control : Siemens 840 Speed : 8000 rpm Movement X/Y/Z : 800/800/800 mm Tool holder : HSK 100 In General: Year of manufacture:2008 Fodpfx Aswx A Hqoh Uspp Speed:8,000 rpm Tool holder:HSK 100 Control system:Siemens 840 D Travel X/Y/Z:800/800/800 mm Table speed:700 rpm Spindle: Technology:Geared spindle Speed:8,000 rpm Max. power:28 kW Max. torque:727 Nm Tool holder:HSK-100 Turning function:Spindle clamping NC swivel head: Technology:Universal milling head B-axis:0.001° NC- Millturn table: Max. speed:700 rpm Clamping surface:800 x 630 mm Max. table load:800 kg Tool magazin: Technology:Chain magazine Number of stations:120 Tool changer:Double gripper Equipment: Chip disposal:Chip conveyor Coolant supply:IKZ system, 80 bar Coolant temperature control:Immersion cooler Position measuring systems:Direct in all axes Automation:2-fold pallet changer Turning function:Spindle clamping + rotary table Workpiece measurement:Preparation for measuring probe Process monitoring:Operating mode 4 Set-up mode:Electronic handwheel Emulsion mist separator:Mechanical separator

Condition: excellent (used), Year of construction: 2018, 2018 KALTENBACH KDP1036 CNC DRILLING / MILLING / SCRIBING LINE – KBS 1051 SAWING LINE. INFEED CROSS TRANSFERS T13 20.5 METRES INFEED CAPACITY. GRIPPER FED MATERIAL MEASUREMENT KDP1036 3 AXIS. AUTOMATIC TOOL CHANGER. 500MM SUB AXIS FOR MILLING, DRILLING, MARKING & TAPPING. INTEGRATED CHIP CONVEYOR KBS 1051 SAW HORIZONTAL AND VERTICAL CLAMPING AUTOMATIC FEED CONTROL Automatic adjustment of saw band angle LS 270 MEASURING HEAD Fpsdpfx Aexmvm Reh Usp OUTFEED 19.750mm OUTFEED CROSS TRANSFERS T13

Condition: used, Year of construction: 2015, functionality: fully functional, machine/vehicle number: 346-09, This machine is equipped with a 2m LNS bar feeder, allowing it to fully automate the production of milled and turned parts directly from the bar stock. On the main spindle, there is an E162 power chuck with a bar capacity of Ø10mm. The bar feeder itself is designed for material up to Ø65mm. Additionally, the machine is fitted with a pneumatically operated two-jaw chuck to allow complete secondary machining of components on the back side. Finished parts can then be removed by an integrated gripper and placed onto the conveyor belt. The machine was retrofitted by CHIRON specifically for precious metal machining. This mainly means that seals within the machine have been reinforced, and the standard chip conveyor was replaced by a drawer unit with a fabric filter. Fpsdpsw U Tbcefx Ah Uop Other features: - High-speed spindle with HSK 40 interface and high-pressure coolant (max. 40,000 rpm and up to 80 bar) - Oil cooler and chip filtration system - Kraft und Bauer fire suppression system with optical sensor - Oil extraction system - Renishaw probe - Integrated tool breakage control/measurement - Tool changer with 64 positions Location: Medical device manufacturer >>>> Collets and tool holders are included in the sale and are part of the listed price.

Condition: used, Year of construction: 2011, Technical details: standard turning dia.: 200 turning length: max. 810 mm control: MSX-701 MAPPS IV Fodpoxq E Ewofx Ah Uspp greates pass round over bed: 800 mm Max. distance between centres: 1130 mm max. turning diameter: 320 mm max. workpiecediameter: 300 mm bar material dia.: 65 mm Traverse X-Axis 1: 210 Traverse X-Axis 2: 210 mm Traverse X-Axis 3: 210 mm Traverse Y-Axis 1: 110 (+65/-45) mm Traverse Y-Axis 2: 110 (+45,/-65) mm Traverse Z-Axis 1: 300 mm Traverse Z-Axis 3: 300 mm Traverse Z-Axis 2: 810 mm Traverse B-Axis: 870 mm turning speed range - spindle: 5.000 1/min Number of spindle speed ranges: 2 . spindle nose: JIS A2-6 spindle bore: 73 mm spindle bearing diameter: 120 mm C-Axis: 0,001 ° turning speed range - spindle: 5.000 1/min spindle nose: JIS A2-6 spindle bore: 73 mm bar material dia. max: 65/52 mm spindle bearing diameter: 120 mm C-Axis: 0,001 ° Number of Turrets: 3 . Number of tool stations: 16 x 3=48 pos Schank height for square tool: 20 mm Diameter of boring bar: 32 mm turret changing time (4-stations): 0,18 sec Number of driven tools: 16 x 3=48 pos max. spindle speed driven tools: 6.000 U/min. Rotary tool machining ability: M16 / Ø16 . rapid traverse X-axis: 30 m/min rapid traverse Y-axis: 20 m/min rapid traverse Z-axis: 50 m/min drive capacity - spindle motor: 25 / 22 kW power capacity - driven tools: 7,5 / 5,5 kW total power requirement: 92,7 kVA weight of the machine ca.: 9,4 t dimensions of the machine ca.: 4,0 x 2,8 x 2,4 m Accerories Chip conveyor Coolantsystem C-axis in main and sub spindle Y-axis 2 x part counter total counter tool setting Overhead partsgripper with conveyor belt. Spindle 1 Chuck SMW KNCS-N 210 / 52 mm Spindle 2 Collet Chuck Hainbuch Spanntop nova Kombi Axfix 65 Robot interface Lehmann Robot with parts belt for feeding and disposal CNC Turning- and Milling Center MORI SEIKI NZ 2000 T3Y2 The NZ2000 T3Y has 2 spindles and 3 turrets, and 2 turrets have the Y-axis function and built-in milling motors. This not only allows synchronized machining using 3 turrets, but also achieves heavy-duty cutting and high-speed machining using rotary tools thanks to the built-in motor turrets. For shaft parts loading and unloading there is a Lehmann Robot conveyor belts for loading and unloading . *

Condition: ready for operation (used), Year of construction: 2023, Control Unit Brand KUKA Fpodpfx Aoxfwwnjh Uop Model smartPAD Main Drive Number of axis 6 Additional Equipment Transfer gripper and support contour with integrated vacuum feedthrough Bellows suction cup, lifting plate Parallel gripper, terminal box QC 90 quick-change system, pneumatic coupling Robot 3D energy chain Documentation in German and English This 6-axis KUKA KR 10 R1440-2 robot arm manufactured in 2023 features a payload capacity of 10 Kg and a range of 1440 mm. It includes a KUKA KRC4 compact control cabinet, smartPAD teaching pendant, and various interfaces for enhanced functionality. Ideal for tasks requiring precision and flexibility. If you are looking to get high-quality robotic capabilities, consider the KUKA KR 10 R1440-2 machine we have for sale. Contact us for more information about this machine. Application Types Robotics

Condition: used, _____ 2 Pieces of Pfiffner RT 100-12 Description: Year of manuf. : 2013 Control : Siemens 840 D Rotary-Indexing-table/Spindle: Clamping stations:12 motorised spindles Drive:Torque drive, water-cooled Position measuring system:Direct Switching time:1.5 seconds Spindles:Water-cooled motor spindles C-axes:0.001°, hydraulic clamping Speed:5,500 rpm Power:11 kW Clamping device:Chuck Basic modules: Technology:Positioning module, 3-axis X-axis:50 mm Y-axis:100 mm Z-axis:100 mm Position measuring systems:Direct in all axes Coolant supply:Integrated : : Workpiece size (max.):100 x 100 x 100 mm Station 1: Horizontal:feeding of raw parts (indexing conveyor + Stäubli robot) Vertical:Measuring raw part Station 2: Horizontal:4-fold turret without drive Vertical:Measuring reclamping error (C-axis zeroing) Station 3: Horizontal:4-fold turret without drive Vertical:Not used Station 4: Horizontal:4-fold turret without drive Vertical:Not used Station 5: Horizontal:6-position turret with WAN, 10,000 rpm Vertical:6-position turret with WAN 10,000 rpm Station 6: Horizontal:4-fold turret without drive Vertical:Not used Station 7: Horizontal:6-position turret with WAN, 10,000 rpm Vertical:Not used Station 8: Horizontal:6-position turret with WAN, 10,000 rpm Vertical:Not used Station 9: Horizontal:4-fold turret without drive Vertical:Not used Station 10: Horizontal:6-position turret with WAN, 10,000 rpm Vertical:Not used Station 11: Horizontal:6-position turret with WAN, 10,000 rpm Vertical:6-position turret with WAN 10,000 rpm Station 12: Horizontal:Charging/discharging unit with double swivelling gripper + discharging belt Equipment: Chipmanagement:Chip conveyor Fsdpfx Ahsw Si T Aj Ujpp High preassure unit:Cooling unit 50 bar Toolmonitoring:Toolbreaktagecontrol ARTIS Rawmaterialfeed:Conveyorbelt with robot Finishpartremoval:Conveyor with 3-way switch Oilmistseparation:Electrostatic filter Fire extraction system:Kraft + Bauer Part labelling:Laser Parts cleaning:HESO cleaning system

Condition: used, Year of construction: 2007, controller manufacturer: Heidenhain, controller model: iTNC 530, _____ Description: Year of manuf. : 2007 Control : Heidenhain iTNC 530 Speed : 42000 rpm Movement X/Y/Z : 800/600/500 mm Tool holder : HSK 40 In Generel: Technology:Automated graphite milling centre Components:2x 5-axis HSC milling centres + pallet system with robot Manufacturer:Mikron + EROWA Types:HSM 400 U + HSM 600 U + Robot Multi Twin Year of construction:2007 Control:Heidenhain iTNC 530 Speed:42,000 rpm Tool holder:HSK 40 Machine I: Manufacturer:Mikron Type:HSM 600 U Traverse paths X/Y/Z:800/600/500 mm Spindle speed:42,000 Tool holder:HSK 40 B-axis:+30° / -110° C-axis:360° C-axis speed:360 rpm Clamping surface:Erowa UCP 320x320 mm Max. table load:120 kg Tool magazine:68 stations Machine II: Manufacturer:Mikron Type:HSM 400 U Traverse paths X/Y/Z:400/240/350 mm Fjdpfjxgpwcox Ah Uepp Spindle speed:42,000 Tool holder:HSK 40 B-axis:+ - 110° C-axis:360° C-axis speed:250 rpm Clamping surface:ITS 148 Powerchuck Table load max:25 g Tool magazine:36 stations Automation: Manufacturer:EROWA Type:Robot Multi Twin Gripper station:6 station, various gripper Round storage:5 levels Level 1-2:5x UCP 300x300 mm Level 3-4:15x ITS 148 Level 5:30x ITS 50 Equipment: Measuring systems:Direct in all axes Workpiece measurement:Infrared measuring probe Tool measurement:LASER Set-up mode:Electronic handwheel Graphite extraction:2x BURN WK 5806 Automation:Round pallet storage

Condition: used, Year of construction: 2018, _____ Description: Year of manuf. : 2018 Control : technical Data Pressing force:130 t Working length:3m Stroke:445 mm Working speed:25 mm/s Increased installation height:Stroke +230 mm Crowning:CNC controlled Back gauge:5-axis with 2 fingers Upper/lower tool clamping:Hydraulic Screen:2 pieces Control system:Touchpoint TruBend Tools:included in the scope of delivery Equipment :- ACB Automatically Controlled Bending Fpjdpfsxgpr Tex Ah Usp :- Angle assistance package :(consisting of ACB Wireless and TCB) :- MobileControl Pro :- Tool lndicator :- Part lndicator :- Work area lighting front and rear :- 2 Support console with plastic support :- 2 Table extension :- BendGuard :Operator ergonomics :- Foot switch :- Communication rail :- MobileControl ToolMaster KB29 :Machine:stable steel architecture with concrete foundation :Upper tool storage with CNC rotary axis :Lower tool storage with CNC rotary axis :Push chain manipulators for upper and lower tools :Magnetic gripper system :Positioning monitoring :CNC turning and transfer station for upper tools :Transfer station for lower tools :Right-hand installation :Control cabinet air conditioning up to ambient temperature 40° C :Control LENZE, linked with machine control of TruBend :integrated in machines Design :Safety Light curtain (vertical and horizontal) with fixed reflector