Used Gripper for sale (737)

Condition: used, mileage: 1,001 km, driver cabin: other, gearing type: other, Vehicle location: Bovenden, Gripper width 570mm, depth 540mm ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Gedpfsi Rni Hsx Aigeiu - .

Condition: used, mileage: 1,001 km, driver cabin: other, gearing type: other, Vehicle location: Bovenden, Gripper width 570mm, depth 700mm ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Gijdpfx Aoi Rnmijigeu - .

Condition: used, mileage: 1,001 km, first registration: 01/1993, fuel type: diesel, empty load weight: 1,240 kg, color: orange, driver cabin: other, gearing type: other, Year of construction: 1993, Vehicle location: Bovenden, gripper control, 2-point mechanical support, cable remote control, 2x hydraulic extensions Construction: cable remote control load holding valves, crane: 4.1m=1500kg, 8m=1000kg, swivel range 410°, ideal crane for setting up toilet houses, top condition ACCESSORIES INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors! - . Giodpfx Aiji Rn Tpsgeu

Condition: used, mileage: 218,160 km, power: 330 kW (448.67 HP), first registration: 05/2017, fuel type: diesel, empty load weight: 16,150 kg, maximum load weight: 9,850 kg, overall weight: 26,000 kg, axle configuration: 6x4, wheelbase: 3,900 mm, brakes: engine braking, color: black, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel, number of seats: 2, loading space volume: 11 m³, loading space length: 4,900 mm, loading space width: 2,420 mm, loading space height: 1,000 mm, Equipment: ABS, additional headlights, air conditioning, cabin, central locking, crane, cruise control, differential lock, onboard computer, parking heater, power assisted steering, seat heater, traction control, trailer coupling, Vehicle location: Bovenden, ClassicSpace, Mercedes PowerShift 3, steel body, Mtlg. House, 1x comfort seat, seat heating, electric mirror, heated mirror, electric window left, electric window right, air conditioning, sun visor, cruise control, air horn, ABS (anti-lock braking system), traction control (ASR), constant throttle, power take-off, differential lock, work lights, rotating beacon, stowage box, leaf spring suspension, left-hand on-board suspension, air+light tow bar, aluminum tank, U-protection, roof hatch, crane at rear, emergency stop, grapple control, high seat, 2-point hydraulic outriggers, 1x hydr. extension, green environmental sticker Wheelbase: 3900 mm Body: Meiller 2-sided tipper body with Bordmatik left approx. 11m³ & rear crane Hiab Jonsered 1300RS79 with high seat, loading height approx. 1540mm. 8t front axle, rear axle disc wheel 300 planetary 13.4t, electronic brake system with ABS and ASR, disc brake with full protection on front and rear axle, ABS can be switched off, parking brake additionally on front axle, condensation water monitoring for compressed air system, stabilizer bar on front axle, stabilizer bar reinforced 2nd rear axle, leather steering wheel. rear axle, leather steering wheel, smoker's package, residual heat utilization, construction site filter, additional thermal insulation, PSM, ClassicSpace, comfort locking system, off-road driving program, Mercedes PowerShift 3, pre-installation for toll collection, tank capacity: 290l, protective plate for tank, LED daytime running lights, High Performance Engine Brake, protective plate under bumper, cyclone pre-filter for coarse dust, transmission oil cooling, Powertrain Pack 1, Protection Pack, Grounder, MB 123-10c MPA N-/M-Speed power take-off. Gsdpfx Aisvhmkaegsiu Load diagram: 4m-2940kg, 6m-2100kg, 7m-1800kg! VIN: WDB96421610141255! Gripper available at an extra charge! ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! - .

Condition: used, mileage: 1,001 km, fuel type: diesel, driver cabin: other, gearing type: other, Vehicle location: Bovenden, Gripper width 630 mm, depth 550 mm ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Gsdji Rnykepfx Aigsiu - .

Condition: used, mileage: 1,001 km, first registration: 01/1983, driver cabin: other, gearing type: other, Year of construction: 1983, Vehicle location: Bovenden, Structure: Width 50 cm Type 601-250 Gripper width 500mm, depth 500mm ACCESSORIES INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors! Giedpsi Rn Irefx Aigju - .

Condition: used, mileage: 1,001 km, driver cabin: other, gearing type: other, Vehicle location: Bovenden, Gripper width 590mm, depth 500mm ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Gsdpfx Aoi Rnmxsigeiu - .

Condition: used, mileage: 75,326 km, power: 184 kW (250.17 HP), first registration: 02/2010, fuel type: diesel, empty load weight: 9,020 kg, maximum load weight: 5,980 kg, overall weight: 15,000 kg, tire size: 275/80R22.5, axle configuration: 4x4, wheelbase: 4,250 mm, next inspection (TÜV): 05/2026, brakes: engine braking, color: orange, driver cabin: day cab, gearing type: mechanical, emission class: euro5, suspension: steel-air, number of seats: 2, Equipment: ABS, additional headlights, air conditioning, all wheel drive, cabin, crane, cruise control, differential lock, fog lights, low noise, onboard computer, power assisted steering, traction control, trailer coupling, Vehicle location: Bovenden, near the main building. Equipped with: 1 comfort seat, rear window, electric mirrors, heated mirrors, electric window (left), electric window (right), air conditioning, cruise control, 8-speed gearbox, ABS (anti-lock braking system), traction control (ASR), constant throttle, auxiliary drive, raised exhaust, differential lock, fog lights, work lights, rotating beacon, storage compartment, leaf-air suspension, trailer hitch with air and light connections, low-noise G1, foldable U-guard, side aluminum fender, crane behind the cab, emergency stop, gripper control, foldable, 2-point hydraulic support, remote control, four hydraulic outriggers, green environmental badge. Wheelbase: 4250 mm. Body: 10-ton roll-off system VDL S10-4000 for containers up to 5m roll height, approx. 1300mm (extendable underride guard) & Atlas TLC 75.2-A4L crane with remote control. Operating hours: 581h. Transmission: ZF 9S-1310 OD! Gedpfx Asyzgm Hjigeiu Load chart: 4.1m-1650kg, 5.8m-1080kg, 7.5m-780kg, 9.2m-600kg, 11m-500kg! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale, and errors!

Condition: used, mileage: 1,001 km, first registration: 01/1992, driver cabin: other, gearing type: other, Year of construction: 1992, Vehicle location: Bovenden, Gripper width 640mm, depth 550mm ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Gijdpfji Rn Amjx Aigou - .

Condition: used, mileage: 1,001 km, driver cabin: other, gearing type: other, Vehicle location: Bovenden, Gripper: width 680mm, depth 440mm with teeth ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Gedsi Rqgaepfx Aigjiu - .

Condition: used, Year of construction: 2014, machine/vehicle number: M298, Used filling monoblock AMS FERRARI 12/12/1 year 2014 The Used filling monoblock AMS FERRARI 12/12/1 year 2014 delivers a compact, integrated isobaric bottling solution for beer production in glass bottles. AMS FERRARI manufactured this model in 2014 and designed it to combine rinsing, filling, and capping into a single mechanical unit. As a result, this configuration reduces handling times and optimizes floor space in medium-scale bottling facilities. Mechanical and production configuration The Used filling monoblock AMS FERRARI 12/12/1 year 2014 includes 12 rinsing grippers, 12 filling valves, and a capping module with two heads. The machine processes containers ranging from 0.33 to 1 liter in a clockwise rotation. Consequently, it suits a variety of bottle formats common in beer packaging. It operates at a nominal speed of 1,800 bottles per hour. Moreover, the system provides a stable and continuous workflow for consistent production output. Operators disassembled the machine after it ran for approximately 200 hours, during which it bottled around 300,000 liters. Due to its low usage, the equipment shows minimal mechanical wear and preserves the integrity of key components. Production teams can, therefore, integrate this equipment into existing lines or use it as the base for new installations. In both cases, the monoblock ensures mechanical uniformity and high reliability. Rinsing section The rinsing module on the Used filling monoblock AMS FERRARI 12/12/1 year 2014 uses 12 mechanical grippers to handle the bottles. The system performs two rinsing treatments, ensuring internal sanitization before filling. In addition, the grippers support both 0.33 and 0.75 liter glass bottles, which makes the machine suitable for a wide range of beer formats. Thus, the rinsing system contributes to maintaining hygiene standards across all packaging sizes. Filling section The filling section uses 12 traditional isobaric valves with mobile nozzles. The system maintains pressure balance during filling and minimizes foam generation or CO₂ loss. This feature, in turn, protects product quality and prevents waste. Furthermore, the mechanical design ensures ease of cleaning and straightforward maintenance. These characteristics make the equipment ideal for beer bottling, where pressure control directly influences final product consistency. Operators rely on the mobile nozzle configuration to handle bottle variations with minimal adjustment. Also, the isobaric valves support repeatability across extended production cycles. Altogether, these features improve filling performance while maintaining operational efficiency. Capping section Gsdjw Ag Ndjpfx Aigsiu The capping module of the Used filling monoblock AMS FERRARI 12/12/1 year 2014 applies crown caps using two heads. The system supports both 26 mm and 29 mm caps and uses mechanical force to seal each bottle with consistent pressure. Unlike electronic systems, this mechanical configuration simplifies service and ensures predictable performance.

Condition: as good as new (ex-display), Year of construction: 2021, operating hours: 50 h, A gantry system for automated loading or transport of heavy parts is for sale. This gantry system can be used for various loading applications (milling machines, lathes, paint lines, welding units, etc.). X travel – 11.6 meters, Y travel – 2.38 meters, Z travel – 2.5 meters. Giedpfx Aiowdnb Dsgju All axes are driven by SEW servo motors. Servo-driven single gripper for parts up to 500 kg. Control cabinet – PLC control – Siemens S7-1500 and SEW drives. The gantry system can be inspected by appointment in Overath.

Condition: good (used), Used rotary indexing table polishing machine Manufacturer: Hau Rotary indexing table with 6 work spindles and 3 polishing stations with oscillation and high-pressure guns, Gsdpeqmfv Sofx Aigeiu 5.5 kW motors, gripper clamping system, switch cabinet

Condition: used, machine/vehicle number: HR6-1200, Used rotary indexing table polishing machine HR6-1200 Manufacturer: Hau Rotary indexing table with 6 working spindles and 3 polishing stations equipped with high-pressure guns, 5.5 kW motors, Gedjyntrhopfx Aigsiu Pneumatic clamping with Schunk PZN 100 clamping grippers, Schunk distributor. Control cabinet. Three rotary table polishing machines are available.

Condition: used, Year of construction: 2020, Overview This container sweep-off depalletiser (new glass) was manufactured in 2020 by Germany Krones AG. The machine is designed for high-speed depalletising of new glass containers in beverage production lines. It operates with a sweep-off system using a four-sided centring carriage to transfer complete container layers onto a discharge table. Technical data Capacity: approx. 48,000 cont/h (up to 57,600 cont/h machine output) Application: Depalletising of new glass containers Configuration: Z-arrangement with pallet infeed and upper-level container discharge Pallet handling: Pallet lifting unit with automatic empty pallet discharge Discharge table: approx. 5,000 mm length Conveyor: Steel chain conveyor Drives: Servo drives (SEW) Sweep-off system: Four-sided centring carriage, servo-driven Layer handling: Integrated handling module with suction gripper system for layer pads and top frames Vacuum system: Ejector-based System Configuration: Pallet lifting unit Container discharge table (approx. 5,000 mm) Steel chain conveyor system Handling module with suction gripper Packing material magazine Empty pallet discharge system Safety fencing (approx. 25 m) Light barriers and safety circuits Giodpfx Aoy Tn D Dsigou

Year of construction: 2016, condition: ready for operation (used), A Fanuc/DMG Mori robot handling system for CNC machines that was used with a CTX is available. Robot type: Fanuc M-20iA, Gripper 1: double gripper, Gripper 2: shaft gripper, max. workpiece weight in single-gripper operation/double-gripper operation: 10kg/2x5kg, max. workpiece diameter: 125mm, weight: approx. 1075kg. Including various storage stations and safety enclosure. Documentation available. An on-site inspection is possible. Gisdezcfk Sspfx Aigju

Year of construction: 2016, condition: ready for operation (used), A custom-built Nordgreif mat gripper for reinforcing steel is available. Load capacity: 6000kg, gripping width range: 2100mm-2520mm, max. opening width: approx. 2660mm, length: 5080mm, mat hooks: 2x3, mat length range: 5100mm-8100mm, mat width range: 2100mm-2520mm, mat height range: 150mm-800mm. Documentation available. An on-site inspection is possible. Godpfxszcflvs Aigoiu

Condition: used, maximum load weight: 28,101 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 11/2011, loading space length: 13,625 mm, loading space width: 2,480 mm, loading space height: 2,700 mm, loading space volume: 91 m³, Equipment: ABS, * VEHICLE NUMBER: 2566 ---* Exterior features: * Galvanized chassis Godsycnd Ujpfx Aigjiu * Gripper edges for rail loading on pocket wagons * 4 pairs of RoRo ferry lashings * Additional DUOMATIC air connection * Document box * ECE and GGVS markings ----* Technology: * BPW axles with drum brakes * Wheelbase 1410/1310 * Lift axle on 1st axle * Tires 385/65 22.5 * Double-decker with 22 loading beams * Load securing rails * Fifth wheel height 1,150 mm * Unladen weight 7,899 kg ---* Rental offer: €39 per day, term as desired, flexible return possible at no extra cost * Delivery to your location possible. Trade-in/leasing/financing. We make it possible!

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, • Year 2004 • In our possession since 06/2023 Gjdpfxozcvaks Aigjiu • Complete gripper setup, with two modified grippers for Ø14 and Ø16 • Automated pallets for Ø3-4-6-10-12 • Various grinding wheels for roughing and finishing, some new, for both metal and HSS • Parkair electrostatic dust extractor • New user interface keyboard (3-4 years old) • New workpiece rotation belt (to be replaced in 2025) • Less than 100 operating hours since 2023 • Dedicated Transor filtration tank, year 2007, maintained with filter replacement and complete functionality check, with service performed in 07/2023 (over €3000 + VAT), less than 100 operating hours since maintenance -separate sale can be considered- • Price for machine + filtration system: €40,000

Condition: used, Year of construction: 2014, machine/vehicle number: 0102-260010, The Behringer HBP413A bandsaw automatic is an economical metal bandsaw for automated 90° cutting operations in industrial production. The HBP413A bandsaw automatic offers a cutting range for round material from 10 mm to 410 mm and for flat material from 10 x 8 mm up to 500 x 400 mm, with a saw blade dimension of 5,800 x 41 x 1.3 mm. The frequency-controlled saw band drive has a motor power of 5.5 kW and offers steplessly adjustable cutting speeds from 20 – 140 m/min (66 – 459 ft/min). The cutting speed can be set and monitored on the control panel. The total drive power is approx. 7.5 kW. Special equipment: chip conveyor, micro-dosing unit, and vertical bundle clamping device at the feed gripper and in the sawing area. Giedpfjy D Immox Aigou

Year of construction: 2009, condition: used, machine/vehicle number: 0301-260004, Kaltenbach KBS 1010 DG - KDX-S 1015 PROFILSTAHL SÄGE-BOHRMASCHINE The Kaltenbach KBS 1010 DG - KDX-S 1015 saw-drill line combination consists of a CNC-controlled Kaltenbach KBS 1010 DG band saw and a Kaltenbach KDX-S 1015 drill line. This drilling saw line is ideally suited for economical sawing, drilling, center punching, marking (scribing) and thread cutting of profiles and flat steel bars in steel construction and the steel trade. The Kaltenbach KDX-S drilling machine is equipped with 3 drilling units, each with 26 kW drive power and 5 tool changers. The Kaltenbach M150 length measuring device (measuring carriage) together with the T13 transport system is designed for profile lengths of up to 18 m. The comprehensive transport system for the material transport of sectional steel also has cross tractors at the infeed and outfeed for the cross transport of the sections. The CNC control together with the Kaltenbach Profiline III software enables data processing in DSTV and DXF format. Gjdpfxeymy Imo Aigoiu The entire system has an ergonomic working height of 640 mm from the material level to the top edge of the floor, giving the operator a good overview. A gripper downstream of the saw is used to remove and eject the first cut or transport the profile to the outfeed area. The Kaltenbach KBS 1010 DG - KDX-S 1015 saw drill line combination consists of: Kaltenbach KDX-S 1015 PROFILE DRILLING SYSTEM CUTTING BAND SAW MACHINE Kaltenbach KBS 1010 DG MACHINE CONTROL Kaltenbach Profiline III LENGTH MEASURING DEVICE Kaltenbach M 150 TRANSPORT SYSTEM Kaltenbach T13

Condition: used, Year of construction: 2011, machine/vehicle number: M337, Used RAVECCO MORAVEC filling triblock 12-12-1C for waterTechnical Specifications & Performance DataThis second hand Filling Monoblock by Raveco Moravec combines rinsing, filling, and capping in a compact rotary platform designed for efficient beverage production and industrial packaging. Engineered for glass bottles, it is a reliable choice for a used bottling line seeking flexible closure options and straightforward integration.Manufacturer: Raveco MoravecModel: 12-12-1C MonoblockSpeed: 2.500 BPH ( Bottle per hour) Configuration: 12 rinsing grippers, 12 filling valves, 1 capping headContainer types: Glass bottlesBottle formats: Compatible with 0.33L, 0.5L, 0.75L, 1.0L bottle formatsNeck finish: Long neckClosures: ROPP screw caps and crown capsConstruction year range: 2009–2011Machine type: Rinser–Filler–Capper monoblockAdvanced Automation & Control SystemsThe machine utilizes a Moravec control platform with manual operation, providing straightforward and dependable control for operators. Core functions for rinsing, filling, and capping are synchronized within the monoblock to maintain consistent bottle handling and process timing. Operator access is designed for quick intervention and basic parameter adjustments, supporting reliable changeovers between closure types.Moravec control system with manual operationSynchronized monoblock timing for rinse–fill–cap sequenceOperator-friendly controls for format adjustmentsStandard emergency stop and interlocked guarding typical of industrial packaging machineryProduction Line Integration CapabilitiesThis Filling Monoblock is configured for a straight-line conveyor layout, enabling smooth integration within a used bottling line or operation as a standalone module. It accepts a range of glass bottle formats and supports quick format and closure changeovers, making it suitable for flexible beverage production environments.Inline integration on straight conveyor layoutsStandalone or in-line operation within broader bottling equipmentFormat flexibility from 0.33L to 1.0L glass bottlesChangeover capability between ROPP and crown closuresMachine Condition & Maintenance HistoryThe equipment is currently in occasional operation and has been in service approximately 25 hours per week during recent use, with remaining time on standby. It has been serviced regularly over the past year of ownership. Testing is available, including both dry run and production tests, to verify operational performance before integration into a second hand production line.Operational status: Occasional operationTesting availability: Dry run and production test possibleService status: Regularly serviced during recent useDocumentation: Technical manuals and schematics not on handSpare parts: Not includedOperational Performance & VersatilityDesigned... Gisdsy Uvhmopfx Aigsu

Condition: used, Year of construction: 2009, x-travel 835 mm y-travel 510 mm z-travel 510 mm CNC-control iTNC530 HEIDENHAIN table-size 1000 x 560 mm max. table load 800 kg spindle taper SK 40 spindle turning speed range 20 - 14.000 U/min feed stepless 1 - 20.000 mm/min rapid traverse 20 m/min drive capacity - spindle motor 13 / 9 kW tool change unit 32 Pos coolant IKZ 25 bar voltage 400 V total power requirement 30 kVA weight of the machine ca. 4,5 t dimensions of the machine ca. 2,25 x 3,20 x 2,30 m chip conveyor 3,50 x 0,85 x 1,55 m coolant equipment 1,40 x 1,60 x 1,80 m spindle oil cooler 0,40 x 0,50 x 1,00 m - Serial-No.: 15415041384 - Machine ON: 72,882 h - Program Run: 25.267 h - control: HEIDENHAIN iTNC 530 Gisdpfey Ty A Sex Aigou - Linear scales in all 3 axis - electr. handwheel - Tool changer 30 pos. with double gripper - Chip conveyor - TSC with belt filter system - Coolant unit - new ball screw incl. bearings (X-Axis)

Condition: ready for operation (used), Year of construction: 2013, punching force: 41 t, sheet thickness (max.): 16 mm, CNC punching machine manufactured in 2013. This EHRT Holecut 40-9 features an automatic infeeding system for materials up to 4.2 m long and gripper jaws accommodating material thickness from 3 to 15 mm. It supports up to 9 tools in storage and has a punching rate of 70 SPM. If you are looking to get high-quality punching capabilities, consider the EHRT Holecut 40-9 machine we have for sale. Contact us for further details. • Performance: • Up to 9 tools in storage • Axes acceleration: 3 m/s2 • Punching rate: 70 SPM • Material specification: Gjdpfx Aoy Tvxpsigsiu • Automatic infeeding system for material up to 4.2 m length • Material gripper jaws for thickness 3–15 mm • System dimensions: • Length: 12 131 (whole line) • Width: 4 240 (Ehrt) • Software: • PowerCut 6.0 software • PowerCut 6.0 second license • PowerCut network licence Additional equipment • Infeed table (loading from the right side) • Output conveyor with pushing station (after marking) • Marking station • Barcode printer

Condition: used, Year of construction: 2004, cutting height (max.): 125 mm, cutting width (max.): 4,300 mm, cutting length (max.): 2,200 mm, table length: 2,500 mm, table width: 1,000 mm, No minimum price – guaranteed sale to the highest bidder! The machine must be collected between June 10, 2026, and June 30, 2026! TECHNICAL DETAILS Maximum plate width: 4,300 mm Maximum plate length: 2,200 mm Maximum saw blade overhang: 125 mm Number of grippers: 10 Number of work tables: 4 MACHINE DETAILS Programming software: CADMATIC 4 Control system: WINDOWS XP EQUIPMENT Gijdpfoy Ur Dqex Aigou Swiveling unit Lift table Roller feed table Lift table (manufacturer: LAWECO, dimensions: 1,000 x 2,500 mm) Barcode label printer (model: ZEBRA ZT231) Scoring unit The machine is sold and delivered in its actual and legal condition ("as is, where is") based on photo documentation and technical/commercial documents with a descriptive character. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at its destination. External reference: 8524