Used cutting machines for sale (74)

Woodworking machinery Cutting machines

Listing

Front-Loading Panel Saws BIESSE SELCO WN 2

Belgium

7,562 km

Front-Loading Panel Saws
BIESSESELCO WN 2

Call

Listing

Solid wood sanding line HOMAG SANDTEQ W-700+B-700

Barntrup

7,744 km

Solid wood sanding line
HOMAGSANDTEQ W-700+B-700

Call

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Working height: 900 mm Working width: 1,350 mm Belt changing side: left Workpiece thickness: 3 - 160 mm Frequency-controlled feed speed: 4 - 20 m/min Abrasive belt dimensions: 2,620 x 1,350–1,380 mm Adjustable sanding belt blowing device with 5 settings WRD WORKPIECE CLEANING ROTOR Workpiece cleaning system with 16 rotating nozzles MOBILE OPERATING TERMINAL powerControl with powerTouch SST SOFT STARTER Inrush currents are limited to prevent voltage drops GWRD BELT CLEANING PROGRAM Upon activation, the machine automatically sets to a 10 mm workpiece thickness and activates the blowing rotors. After the feed belt is fully cleaned, the machine returns to its initial setting. AAT EXTRACTION DAMPER CONTROL Control of extraction dampers via the terminal (24 Volt DC, without extraction dampers included) UPS EMERGENCY POWER SUPPLY FOR BELT CONTROL 1-3 PCS Uninterruptible power supply for sanding belt oscillation in case of power failure System consists of: SANDTEQ W-700, PROFI SWB735/RRE – sanding from below Wide belt sanding machine with three sanding units for processing wood or wood-like workpiece surfaces Prepared to accept up to two auxiliary units, such as a cleaning brush, satinizing or structuring brush, and rotating cleaning nozzles. Units: I. R UNIT Iedpfsyw Ndmex Abgsar Sanding unit with automatically adjusting contact roller Profiled steel roller, 240 mm diameter With grain compensation Drive motor: 37 kW Abrasive belt speed: 25 m/s - Automatic locking of the sanding unit for fast belt changes and increased process safety - Abrasive belt drives with electronic, wear-free brake - Optical, touchless abrasive belt tracking - Pneumatic abrasive belt tensioning with integrated belt edge compensation II. R UNIT Sanding unit with automatically adjusting contact roller Rubber-coated roller, 240 mm diameter Rubber hardness: 85° Shore With grain compensation Drive motor: 30 kW Abrasive belt speed: 18 m/s III. E UNIT Sanding unit for installing a pressure beam - Automatic locking of the sanding unit for fast belt changes and increased process safety - Abrasive belt drives with electronic, wear-free brake - Optical, touchless abrasive belt tracking - Pneumatic abrasive belt tensioning with integrated belt edge compensation - Protected storage area on the machine for additional sanding inserts Drive motor: 22 kW Abrasive belt speed: 2 – 18 m/s Torque-dependent standby operation to reduce energy consumption. ACP PNEUMATICALLY SUPPORTED PRESSURE BEAM - Adjustable sanding pressure via pressure regulator - Workpiece-controlled engagement and disengagement at the leading and trailing edges - Various sanding inserts, 80 mm wide, with different felt hardnesses Machine dimensions (L x W x H): 3,900 x 2,100 x 2,000 mm Machine weight: approx. 7,500 kg SANDTEQ B-700, PROFI SWT735/RRE – sanding from above Wide belt sander with three sanding units for machining wood or wood-based workpiece surfaces Units as above, additionally: FBM FINISHING BRUSH Brush unit with finishing brush Bristles: horsehair Diameter: 130 mm Drive motor: 0.75 kW Machine dimensions (L x W x H): 2,995 x 2,100 x 2,255 – 2,415 mm Machine weight: approx. 6,500 kg

See details

Listing

Panel dividing system with area storage HOLZMA / BARGSTEDT HPL 530 / TLF 610

Barntrup

7,744 km

Panel dividing system with area storage
HOLZMA / BARGSTEDTHPL 530 / TLF 610

Call

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, 1 Panel Sizing Saw with Storage System Manufacturer: HOLZMA Model: PROFILINE HPL 530/56/22 – right-hand machine Year: 2008 Including integrated storage system PROFI TLF610/10/05/L Manufacturer: BARGSTEDT Year: 2013 Woodstore inventory management software, offcut management, etc. Storage area approx. 37 x 11.5 m Max. stack height in storage: 2,500 mm Ijdpjyw Ivhefx Abgjar Speed Concept: sets completely new standards that revolutionize panel dividing technology. + Significantly higher speed and dynamic acceleration of the saw carriage. + Extreme acceleration of the program pusher. + Central angle alignment device. + Electronic height control of the pressure beam. + Optimized motion sequences via integrated gripper measuring system. Cutting length: 5,600 mm Cutting width (program pusher travel): 5,600 mm Panel rotation device for head cuts Laser guide light: marks the cutting line on the workpiece for visible or scribed cuts. Lift table feeding Lift table size: 5,600 x 2,200 mm PROFILINE VAC infeed carriage 5,600 mm Separate infeed carriage for gentle loading of sensitive single panels via vacuum, as well as efficient infeed of panel packs. Saw blade projection: 130 mm Saw carriage feed: Forward 1-150 m/min Reverse constant 150 m/min Program pusher speed: Forward/reverse 90 m/min (in EU countries forward = 25 m/min) Automatic pressure beam height control: yes Automatic cutting height: yes Adjustable pressure beam contact pressure: yes Adjustable gripper contact pressure: yes Gripper release: yes Fully air-cushioned machine table (saw body): yes Angle alignment device: Min. alignment width: 0 mm Max. alignment width: full cutting length Main saw motor (at 50 Hz): 18.0 kW Frequency control: 1,700 – 4,200 rpm Scoring saw motor: 2.2 kW Operating voltage: 400 V / 50 Hz Working height: 1,020 mm SPZ UNIT W. LIFT ELEMENT 2-FINGER 11/510/530 AUTOMATIC EJECTOR FENCE Program-controlled ejection of panel packs to the area of the air cushion tables. FULLY AUTOMATIC SCORING SAW ADJUSTMENT TYPE 530 Camera-controlled GROOVE PROGRAM (AUTOMATIC) Groove program with graphical input and sequence display. Positioning accuracy: Groove depth is steplessly variable via control (hydraulic stop). CUT-OUT/STRESS RELIEF CUTTING PROGRAM LABELLING WITH PART GRAPHICS LABEL PRINTER TYPE PICA 108 Thermal / thermotransfer label printing station OPTIMIZATION PROGRAM 'CAD-PLAN' -JUST-IN-TIME- Additional 'Just-in-time' function (possible operating modes): 1. Optimization at the saw ----- - Possible import of part lists from industry packages, Excel, etc. - Incorporates available offcuts in optimization - In case of production interruption, unproduced parts can be re-optimized - Flexible selection of which parts with which material are optimized and produced at which time 2. Transfer of optimized data to the saw - Modification of optimized cutting plans at the saw: - Delete/add parts - Add available offcuts - Change panel sizes - Combine runs, etc. New optimization is performed directly at the saw. ONLINE DATA TRANSFER + USB PORT CAMERA MONITORING OF THE FEED AREA Material specifications for lift table feed: Max. waviness: 40 mm/m Panel thickness min. 6 mm Thickness tolerance per panel max. +/- 0.2 mm Stacking accuracy +/- 50 mm

See details