Used Die Cutting for sale (18,039)

Condition: ready for operation (used), size 52x72 Nodpfxexzhdwo Af Ijwb

Condition: ready for operation (used), Year of construction: 2006, size 74x102cm Njdsxzhb Aopfx Af Ijwb

Condition: new, Year of construction: 2025, ML750 Nwsdpfx Afjvv R H Ue Iob Inner chase size 750 X 520 mm Max. die cutting size 750 X 520 mm Working speed 28±2 s/min Max. rule length ≤15 m Motor power 2.2 kW Weight 2000 kg Overall machine dimensions 1650 X 1540 X 1650 mm

Condition: like new (used), Year of construction: 2022, Hot stamping plate dimension(W*L): 330mm* 260mm Die cutting plate dimension(W*L): 330mm* 350mm Max.unwind roll diameter& Max.rewind roll diameter: 650mm(can load 2000 meters material) Max.speed: 23000 times/h Applicable blade height: 7mm-23mm Applicable hot stamping tooling height: 1.5-4mm Die cutting accuracy: 0.1mm Hot stamping accuracy: 0.2mm Dimensions: 5300mmx1300mmx1700mm Nwodpfx Aop H Swdjf Ijb Voltage/current: 3 phase 380V/32A Main motor power :7.5KW Gross power: 15KW Total weight: About 4000KG

Condition: new, Brand New - One Year Warranty Max. die cutting size 1100 X 800 mm Working speed 23±2 s/min Nwjdpfx Afovv R Hzo Iob Max. rule length ≤30 m Motor power 5.5 kW Weight 4500 kg Overall machine dimensions 2080 X 1950 X 1900 mm

Condition: excellent (used), Year of construction: 2016, operating hours: 27 h, SBL 1060 SE Year: 2016 Sheet feeder: Manual non-stop pile feeder Material range: Paper and board from 470 × 350 mm to 1060 × 760 mm Max cutting format: 1050 × 740 mm Min sheet size: 470 × 350 mm Nwedpfxowypp Ie Af Ieb Max sheet size: 1060 × 760 mm Max cutting pressure: 300 tons Material thickness: 0.1 – 2 mm (corrugated/laminated max 4 mm) Min gripper margin: 9.5 mm Max inside chase size: 1155 × 852 mm Cutting plate size: 1076 × 756 mm Max speed: 8,000 sheets/hour Power consumption: Total 32 kW (22 kW + 10 kW for lower plate heating) Machine dimensions (L×W×H): 5,900 × 5,700 × 2,615 mm Max pile height – feeder (with pallet): 1,750 mm Max pile height – delivery (with pallet): 1,450 mm Feeder Section - Pneumatic feeder table - Non-stop manual feeder system - Anti-static system - Pre-pile device - Manual suction group adjustment - Micrometric suction adjustment - Motorized side pile adjustment - Suction belt feeder table - High-pressure lubrication pump - 2 pneumatic side register guides - Electronic control of front and side register Cutting/Embossing Section - Automatic pressure adjustment up to 300 tons - Preparation and introduction table for die frames in platen - 2 quick-lock die chase frames with bottom plate - Pneumatic locking of the chase and lower supporting plate - Centerline System - Micrometric system - Heated lower support plate (24 mm) - Cutting plate: 4 mm - Compensation plate: 3 mm - Archiveable 1 mm thin cutting plate Stripping Section - Quick lock for upper and central stripper frames - 2 standard upper stripper frames - 2 standard lower stripper frames - Double accessory kit for lower stripper prep (pins, bars, clamps, etc.) Delivery Section - High-pile automatic non-stop delivery with conveyor - Guillotine for automatic removal of gripper margin waste - Sheet deceleration device - Tab insertion device

Condition: good (used), ML-800 NXL Die-Cutting Machine This machine is used to cut shapes from a mold (die) from materials such as paper, cardboard, leather, plastics, etc. The machine is in perfect condition, manufactured in 2018. First installed in 2020. This is the heaviest die-cutting machine in this format, precise. Format: 830 x 560 mm Weight: 2500 kg Power supply: 380 V Motor: 2.5 kW Equipment: – Electromagnetic clutch and brake Nwsdpfjydkgzex Af Ieb – Quick-mount frame – 3 operating modes: continuous, time-delayed, and manual – Centralized pressure lubrication – Additional safety guards – Operating tools and instructions with CE documentation.

Condition: good (used), Die set, hand pipe thread cutter, thread cutting machine, pipe thread cutter, pipe thread cutter, cutting head -for pipe size: max. 2" inch -5x Cutting tips: 3/4" 1" 1 1/4" 1 1/2" 2" inch Nwodpfxoc T Nx Ij Af Ieb -2x Threaded ratchets: Type 111-R/12-R -Price/Sale: complete -Weight: 12.8 kg

Year of construction: 2012, condition: good (used), Multifunctional punch, punch press, hole punch, pneumatic hole punch -Manufacturer: Tekna -Type: TK280 HU3 -Matr.: 109 -COD.: Z994 598 88A340 -pneumatically operated -Piston stroke: 20 mm Nwjdpfx Aoc Uldrjf Isb -Pressure power: 29.42 kN -Nominal pressure: 6/7 bar -Foot switch -Year of manufacture: 2012 -Dimensions: 565/600/H1050 mm -Weight: 71 kg

Condition: good (used), Multifunctional punch, punch press, hole punch, pneumatic hole punch Article No.: 296 566 -Dimensions: 800/400/H1200 mm -Weight: 180 kg Nwjdpeb A I H Rsfx Af Isb

Condition: excellent (used), Multifunctional punch, punch press, hole punch, pneumatic hole punch Nodpfob A Hl Rox Af Iswb Article No.: 296 566 -Weight: 170 kg

Condition: good (used), Die set, hand pipe thread cutter, thread cutting machine, pipe thread cutter, pipe thread cutter, cutting head Nwedpfx Afec Txarj Ijb -for pipe size: max. 1 1/4" inch -4x cutting tips: 1/2" 3/4" 1" 1 1/4" inch -Number: 1 set available - Price: per set -Dimensions: -Weight: 6.6 kg

Year of construction: 1984, condition: good (used), BOBST I 130 ER Automatic Die-Cutting Machine Year of manufacture: 1984 2. Sheet Formats Maximum sheet size: 920 x 1,300 mm Minimum sheet size: 450 x 580 mm Working format: – Max. 890 x 1,270 mm (open chase) – Max. 900 x 1,300 mm (closed chase) 3. Material Specifications Maximum board thickness: 1.5 mm (cardboard) Minimum grammage: 90 g/m² Gripper margin: Nwjdpfxjycv Dve Af Isb 10 mm 4. Chase Sizes – 915 x 1,300 mm chase without bar – 840 x 1,300 mm chase with bar 5. Pile Heights (Non-Stop Operation) Feeder pile height: Max. 1,500 mm with pallet Delivery pile height: Max. 1,400 mm with pallet Maximum pallet size: 900 x 1,300 mm 6. Equipment and Features – Suitable for carton and paper processing – Not suitable for corrugated board – Stripping possible using stripping frame and separation grid – EMS side lay system for alignment according to printed marks

Condition: good (used), Year of construction: 1997, Die cutting press, make Drössert Nwjdpfx Afjya Hf Ss Isb Size: 100x140 Year of manufacture: 1997

Year of construction: 2026, condition: new, Specification: Maximum sheet size 740 x 1060 mm Minimum sheet size 330 x 400 mm Max. cutting pressure 3.0 MN Maximum number of strokes per hour 8.000 sh/h Suitable for following material Paper to a minimum weight of 80 g/m² Carton board up to a maximum thickness of 2.000 g/m² Corrugated board up to a maximum thickness of 4 mm Equipment: Non-Stop-feeder Manual Non-Stop device for the feeder Stripping station including auxiliary pile for Non-Stop delivery Centerline operator platform Nodpfx Aelyqrcjf Iewb 1 tool set Machinedelivery 6-8 month after order

Year of construction: 2026, condition: new, Specification: Maximum sheet size 570 x 820 mm Minimum sheet size 230 x 280 mm Max. cutting pressure 1.8 MN Maximum number of strokes per hours 8.000 sh h Suitable for following material Paper to a minimum weight of 80 g/m² Carton board up to a maximum thickness of 2.000g/m² Corrugated board up to a maximum thickness of 3 mm Equipment Feeder Strippingstation including auxiliary pile for Non-Stop delivery Centerline 1 tool set Nsdpfslyqpdjx Af Iswb Machinedelivery 6-8 month after order

Year of construction: 2026, condition: new, Specification: Maximum sheet size 740 x 1060 mm Minimum sheet size 330 x 400 mm Nodpfxslyp Ems Af Iewb Max. cutting pressure 3.0 MN Maximum number of strokes per hour 9.000 sh/h Suitable for following material Paper to a minimum weight of 80 g/m² Carton board up to a maximum thickness of 2.000 g/m² Corrugated board up to a maximum thickness of 4 mm Equipment: Non-Stop-feeder Manual Non-Stop device for the feeder Stripping station including auxiliary pile for Non-Stop delivery Centerline operator platform 1 tool set Machine delivery time: 6-8 month after order

Year of construction: 2004, operating hours: 37,800 h, condition: like new (used), functionality: fully functional, Top maintained high premium die cutter for fast setup and TOP quality jobs Nwjdpeyaq S Aofx Af Ijb Technical data: Paper up to 70 gsm Cardboard up to 1000 gsm Corrugated board up to 2 mm Max. format: 1060 x 760 mm Min. format: 400 x 350 mm Press force: 260 t Speed up to 9,000 sheets/hour Equipment: Stripping station Optical register control Automatic pile alignment Ultrasonic double sheet control Centerline Microplate Plate 4 mm 2 closed frames Non-stop delivery Alignment table Height raised by 220 mm

Condition: used, Year of construction: 2000, functionality: fully functional, Kerma TS 3E Die Cutting Press, completely overhauled in 2000. Die cutting area 850x1250 mm / Clamping frame size 800x1200 mm. Quick-clamping frame. Safety infeed and outfeed tables. Max. pressing force: 240 t. Dimensions: 2500 x 2000 x 1650 mm. Power: 7.5 kW. Nwsdpjx Anvpofx Af Ijb

Condition: ready for operation (used), functionality: fully functional, Machines for the production of structural packaging. Consisting of a die-cutter H-142, year 1986, size 900x1400 mm; a boxmaker by Pack Projekt (year unknown, purchased in 2009, feed width 1450 mm, additional creasing bar for vertical creasing, 350 mm slitting knife); and a gluing machine for self-adhesive tape, silicone tape dispenser and tear thread (feed 1400 mm, year 2010, hot melt glue system). All machines are used, operational, and ready for immediate use. SEE PHOTOS AND DOCUMENTS. Nwsdoyan I Iopfx Af Iob If interested in individual machines, simply send us your proposed price for the relevant machine and we will contact you.

Year of construction: 1996, condition: good (used), Multifunctional punch, punch press, hole punch, pneumatic hole punch Njdpfx Afsb A H U Eo Iewb -pneumatically operated -Year of manufacture: 1996

Condition: good (used), Year of construction: 2023, operating hours: 5,001 h, functionality: fully functional, X working area max.: 3000 mm Y working area max.: 1500 mm Control: TRUMPF Control based on Rexroth IndraMotion MTX Machine: - Closed machine frame - Hybrid axis system - Linear magazine with 24 slots for clamps and tools - Hydraulic clamps (3 pieces) - Drives with maintenance-free three-phase motors - Repositioning with programmable hold-down device - Foot pedal for clamp closing - Parts chute on the right Punching Head: - Delta Drive - Rotatable mono-tool holder - Programmable hold-down position - Tool length compensation - Punch lubrication spray system - Punch slug extraction - Forming function - Stroke counter for punches Control: - TRUMPF Control based on Rexroth IndraMotion MTX - Touch panel with 19" TFT color display - Touchpoint - Programmable cutting gas pressure - Automatic shut-off - Remote support interface - Program management - Production planning Data Transmission: - USB interface - RJ-45 network interface - Central Link - Online Update Manager Safety: - CE marking and EC Machinery Directive - Dual-beam safety light curtain Extended Standard Equipment: - 1st positioning pin (inside right) + Brush tables + MultiTool + Thread forming with thread counter Nsdpfx Aoxxbwxof Iswb + Thread-former breakage monitoring + Lubricant level monitoring + Marking/rapid beading + Deburring and rolling technology + Adaptive stroke calibration + Die lubrication spray system + Smart Punch Monitoring + Parts flap on the left + Parts conveyor belt for parts flap left + Collection tray for parts conveyor left + Sensor for parts chute + Parts conveyor for parts chute right + Additional clamp + 4x individually openable clamps + 4x height-adjustable clamps + Automatic clamp closing loading sensor system + Optical loading sensor + Automatic repositioning movement to compensate for loading tolerance + Repositioning device for DeltaDrive + Vibration-dampened installation + Chip conveyor with tilting bin + Machine status light + Warpage detection + Wireless Operation Point SheetMaster Compact 3000 x 1500 (AK05): - Loading station with spreading magnet for sheet separation - Suction frame - Vacuum sensors - Double sheet detection - Unloading cart for residual grids and microjoint sheets - Second operator station for loading and unloading + Compact setup for light grid and reference point system + Peeling system SortMaster Compact: - Machine-integrated automated small part removal - Suction frame for unloading good parts up to 600 x 400 mm (X x Y) - 2 suction bars (each suction cup individually controllable) - Unloading area 600 x 800 mm - Vacuum sensors for the suction circuits + X-axis extension - Extension of the unloading area to 1200 x 800 mm

Condition: good (used), Year of construction: 1999, operating hours: 52,324 h, functionality: fully functional, X working area max.: 1270 mm Nwsdpfx Afsxxbdlo Ieb Y working area max.: 1270 mm Control: Bosch Type 3 Basic Standard equipment: - Robust C-frame - Safety light barriers - Coordinate guide with integrated linear magazine - 2 clamping claws - Automatic tool changer - Automatic repositioning - Tool length compensation - Forming capability - Mono tool holder with 360° rotation for all tools - Programmable hold-down device - Multitool drive - Punch slug extraction - Brush tables - Part chute 200 x 200 mm, sorting of parts into 2 containers - NC-controlled, digital, maintenance-free three-phase drives - Network interface RJ34 - 3.5" floppy disk drive - TOPS 2000 graphical programming - Online diagnostics via modem - Operating manual + Vibration-damped installation + Multitool + Thread forming + Start post

Year of construction: 1995, condition: good (used), Multifunctional punch, punch press, hole punch, pneumatic hole punch -operated: pneumatically Nwjdpfx Ajb A Nc Hef Ijb -Year of manufacture: 1995

Condition: good (used), Thread cutting head with Stehler jaws, thread cutting die Nedpfx Aob A N U Ref Iowb -inch thread: 1/2"-3/4"-1" inch -Weight: 5 kg