Used Cutting Grinder for sale (15,574)

Condition: reconditioned (used), Year of construction: 1989, functionality: fully functional, - 160 mm cutting height Ljdpfowy Ixuex Ah Sohk - 500 mm cutting depth - pneumatic saw stroke

Year of construction: 2020, condition: ready for operation (used), A fully automatic Cleveland CNC cut-off and face grinding machine for carbide and HSS bars is available. Grinding spindle speed: 2000rpm, max. cut-off wheel diameter: 200mm, workpiece diameter range: 3mm-32mm, max. workpiece length: 500mm, length accuracy: +/-0.02mm, face runout accuracy: +/-0.01mm. Machine dimensions X/Y/Z: approx. 1900mm/1200mm/2400mm, weight: approx. 1700kg. Documentation available. An on-site inspection is possible. Ljdpfx Ahezhb Dke Sohk

Condition: used, The Herbold PU 500 fine grinder is suitable for fine grinding of plastics and soft to medium-hard materials. Drive power 55 kw Grinding disk diameter 500 mm Throughput capacity approx. 200-800 kg/h depending on material and fineness Lhjdpfx Ahozmdgxs Sjk

Condition: refurbished (used), Year of construction: 2001, functionality: fully functional, warranty duration: 6 months, Function The TAM 25/600 precisely separates and cuts ejector pins, ejector sleeves, and knockout punches in the shortest possible time. Workpieces with diameters from 0.5 to 25 mm made of tool steel and hard metal can be processed. Your advantages: • User-friendly quick-change system • Fast loading and unloading of workpieces • Separating and cutting to length in a single operation Simply place the workpiece in the quick-change prism, set the desired finished dimension, and separate and cut to length in one step. An optional additional clamping device is available for extremely thin, short, or offset pins. • Additional clamping device for thin, short, and offset pins Lhjdpfx Aezq Srwoh Sjk Precision After separating, the work table is locked in the end position, the length is measured precisely, and ground to the finished dimension using an integrated micrometer feed. The wear of the grinding wheel is compensated by tracking the grinding spindle. Your advantages: The integrated diamond automatically dresses the wheel. On request, CBN or diamond grinding wheels are also available as optional equipment for the TAM 25/600. • Precise workpiece positioning via micrometer screw • Integrated dressing diamond for the grinding wheel • Integrated coolant system to prevent overheating of the workpiece • Trackable grinding spindle, so that the cutting edge of the grinding wheel always remains in the 0 position We also offer overhaul services for your old separating and cutting machine; simply contact us!

Condition: excellent (used), Precision grinder for cutting ejectors to size and grinding fronts Grinder features: A precise device enabling semi-automatic cutting of ejectors to size and grinding fronts in one clamping Lhjdpfxjvyuw Sj Ah Sjk The grinder can be adjusted during operation The belt tension can be adjusted and controlled automatically (the greater the resistance, the tighter the belt) Grinder for cutting ejectors and grinding fronts Grinder for cutting ejectors and grinding fronts Manufacturer code 100 Grinder parameters: Motor power - 0.735kW Max. speed - 3 600 rpm Diameter range - ⌀1-25 mm Maximum length - 300 mm (optionally 500 or 600 mm) Length tolerance for ⌀25x300 mm: +/- 0.01 mm Dimensions LxWxH: 430x360x500 mm Weight - 109 kg Link to the video on YouTube:

Condition: good (used), We have 2 granulators / shredding mills for sale (the listed price applies to mill no. 2). The machines were used for cutting and shredding plastic, but they can also be used for processing other plastic materials. Both machines are adapted for liquid cooling. -Technical Data (Mill No. 1, square base): Dimensions: 150 x 115 cm / Height: 210 cm Rotor diameter: 36 cm Rotor/blade width: 55 cm Number of blades: 3 (The fixed blades are positioned diagonally; thanks to this configuration, resistance during cutting and shredding is significantly reduced, making the machine's operation much more efficient). Inlet (feed opening): 30 x 53 cm Motor: 22 kW / 30 HP Adapted for liquid cooling ----- -Technical Data (Mill No. 2, inclined/pyramid base): Dimensions: 150 x 125 cm / Height: 180 cm Rotor diameter: 25 cm Rotor/blade width: 52 cm Number of blades: 3 Motor: 22 kW / 30 HP Adapted for liquid cooling Prices: Mill No. 1: €7,200 Mill No. 2: €5,900 Ledpfx Ahjuw Skhj Sshk Price for buying both machines: €11,900

Condition: used, Year of construction: 1954, functionality: fully functional, machine/vehicle number: 541000, total height: 1,700 mm, total length: 1,200 mm, total width: 1,200 mm, overall weight: 815 kg, table length: 700 mm, table width: 70 mm, disc diameter: 150 mm, - Year of manufacture: 1954 - Fully functional, powered, ready for demonstration - Grinding wheels Ø150 mm - Cross travel: 300 mm - Longitudinal travel: 450 mm - Table size: 700 x 70 mm / tiltable - Grinding spindle tiltable in Z, X, Y axes - Machine dimensions: 1700 x 1200 x 1200 mm - Weight: 815 kg - Factory No.: 541000 Accessories: - Swiveling dividing head - Swiveling vice - 2x dressing diamonds Ledpfx Aexnimtoh Sjhk - Grinding wheel holders - Approx. 15 diamond/CBN grinding wheels - Various grinding wheels - Collets Ø1 – Ø20 mm

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, Well-preserved Schneeberger Gemini Linear tool grinding machine. With integrated automation incl. pallets. Lhjdpfx Astk Av Ujh Sek

Condition: ready for operation (used), A Se-Ma meat grinder and bowl cutter combination machine is available. Bowl cutter volume: approx. 50l, bowl diameter: 940mm, upper edge height on bowl cutter side: 820mm, knife heads: 6, grinder plate diameter: 130mm, feed bowl internal dimensions X/Y: 600mm/820mm, feed bowl external dimensions X/Y: 630mm/850mm, upper edge height on grinder side: 1040mm, machine dimensions X/Y/Z: approx. 1800mm/1050mm/1400mm, weight: approx. 500kg. The machine is not equipped with a mixing gear. An on-site inspection is possible. Ledpfx Ajzkvl Ish Sehk

Condition: used, Year of construction: 2006, Offer in progress! Lsdswftufspfx Ah Sshk

Condition: used, Year of construction: 1992, max. grinding diameter 0 mm Lodpfx Aet Hwpaoh Sehk grinding length 0 mm workpiece length 970 mm total power requirement 12 kW weight of the machine ca. 5 t dimensions of the machine ca. m

Condition: excellent (used), Year of construction: 2013, operating hours: 32,269 h, functionality: fully functional, machine/vehicle number: 2067-2091, WALTER Helitronic Basic 2013 For sale is Walter Helitronic Basic CNC tool and cutter grinding machine. It is in excellent working condition. Ledowu Nw Uepfx Ah Sehk Machine can be inspected by appointment. Price on request, loading on truck included. Possibility of shipping Worldwide. TECHNICAL CHARACTERISTICS WALTER Helitronic Basic 2013 No. 2067-2091 Working hours 32269 [h] CNC control FANUC 310i Software: Tool Studio Version 3.5 Number of axes 5 Travel path: X= 470mm Y=330mm Z=640mm Spindle rotation speed: 10500 rpm Traversing feeds X, Y and Z axes 15000 [mmmin] A axis 360 [°] C axis +- 200 [°] Max. workpiece lenght peripheral grinding 350 [mm] Max. workpiece lenght end face grinding 280 [mm] Max. grinding diameter 320 [mm] Max. grinding diameter with automated work table 290 [mm] Grinding spindle attachment NCT Grinding spindle diameter 70 [mm] Max. diameter grinding wheel 150 [mm] Max. part weight in part holder headstock 20 [Kg] Coolant pump pressure 7 [bars] Collant pump flow rate 80 [lmin] Lubrication tank capacity 350 [l] Supply voltage 400 [V] Grinding spindle motor power: 7 kW Tool holder: ISO 50 Weight: 4500kg EQUIPMENT INCLUDED x1 Software TOOL STUDIO 3.5 x1 RENISHAW tool probe x1 DSL AIR TECHNOLOGY AES-SIGMA 20 type oil mist extractor x1 lubrication tank x1 paper band filtration unit x1 GRUNDFOS coolant pump x1 machine parameter backup x3 technical manuals (paper format) x1 technical documentation (CD-ROM format)

Condition: excellent (used), Tool and cutter grinder AUTOOL model VS300 Lhedsxfk T Ajpfx Ah Ssk

Condition: like new (used), Tool and cutter grinder GRIFO model U10 Ljdpfx Asinbileh Sohk

Condition: used, Year of construction: 1995, functionality: fully functional, Tool grinding machine Jungner Sweden Built in 1995 Lsdpfx Ahewdihro Sshk Accessories

Condition: as good as new (ex-display), Please check in your junk mail if you do not receive a reply within 24hrs from sending your inquiry !!! CAN SHARPEN MAX 406MM DIAMETER CUTTERS !!! The G-716 Semi-automatic Cutterhead Grinder is used to sharpen 178mm to 406mm diameter eased edge, milled to pattern, and fingerjoint cutterheads. Worktable traversing is automatic and has adjustable stops. Cutterhead indexing is manual. Each knife is held against a positive stop while being ground !!! No Index Plate To Change No index plate to change when working with heads with different numbers of knives. The use of an index plate assumes that the knives and head separations are uniform throughout, which is often not the case. If the height of the knife is high or low, then the front face of the knife will vary from knife to knife making the task of grinding difficult. The one constant is the back face of the knife, therefore the use of an indexing stop against the back face will provide for accurate indexing regardless of the irregularities in the knives and head slots. Head Indexing and Wheel Feed: Manual Minimum / Maximum Diameter Cutterhead: 7″ Min./16″Max. 178mm Min./ 406mm Max. Worktable Feed: Air / Oil Travel (maximum): 12″ 305mm. Adjustable Limits: Proximity Switch Speed: Fully Adjustable Index Method: Manual index after each knife is ground. Grinding Spindle: 1-1/2 HP Wash Down Duty TEFC Motor 3600 RPM, Dual ABEC 7 Precision Bearings, with Sealed Lubrication. 8″ (203mm)Diameter Grinding Wheel (9″ 229mm Diameter Max.) Coolant System: 15 Gallon Tank with Casters, Sediment Tray Full View Sight Glass, 5 GPM Pump (120VAC) Wash Down Hose Included Ljdeq Dzi Tjpfx Ah Sshk Specifications Grinds 7″ to 16″ diameter eased edge, milled to pattern, and finger joint heads Automatic traversing worktable with adjustable travel limits Manual indexing of knives against a positive stop with grinding position pneumatic brake allowing precision indexing without the need of an index plate High precision 1-1/2 HP grinding spindle with sealed lubrication Recirculating adjustable flow flooded coolant system with wash down hose Fully enclosed grinding chamber with viewing windows and task light Grinding wheel feed allows unattended operation. New Proscale.

Condition: like new (used), Year of construction: 2020, operating hours: 4,000 h, The machine is as good as new. It is equipped with an ELBARON sanding mist extraction system. The machine can also be supplied without this device on request. The package includes collets for all standard diameters up to 20 mm. Complete description and installation manual. An original spare spindle is available on request. So there is no waiting time for spindle maintenance. English: Lodpfx Ahet Dykns Sshk The machine is in mint condition. It is equipped with an ELBARON grinding mist extraction system. On request, the machine can also be delivered without this device. The package includes collets for all common diameters up to 20 mm. Full description and installation manual. An original spare spindle is available on request. So there are no waiting times for spindle maintenance.

Condition: used, Year of construction: 2001, longitudinal feed X: 490 mm Vertical feed Y: 320 mm cross travel Z: 660 mm Swivel range C: +/- 200 ° Control HMC 500 WWM Walter lenght tool piece capture A: 175 mm ISO 50 Max. rpm A: 60 min/-1 Ledpfow E Npxjx Ah Sjhk centre height 145 (190) mm max. workpiecediameter 320 mm max. workpiece length 320 (350) mm resolution 0,0001 ° Resolution 0,0001 mm spindle diameter 80 mm grinding wheel diameter max. 200 mm Max. rpm 0 - 7.000 min/-1 driving power - grinding spindle 24 kW max. Torque 6 Nm total power requirement 35 kVA weight of the machine ca. 4,65 t dimensions of the machine ca. 3,6 x 2,5 x 2,95 m CNC - Tool-Grinding-Machine WALTER - Helitronic Power Production - Optional for an additional charge: WALTER Heli ToolCheck (stock number 1039-9375) ?m=1039-9375&s=WALTER%20Heli%20Toolcheck

Condition: used, Technical details: grinding length: 300 mm grinding spindle - swivable: 350 ° grinding head adjustable: senkrecht: 250 mm adjustment of spindle-head: quer: 230 mm grinding head adjustable: neigbar +/-15° ° grinding diameter: Ø 250 mm spindle revolutions per minute : 2200 - 3500 - 5200 U/min work table:: B:120 x L: 950 mm table movement: Obertisch schräg: recht/links 45° mm table movement: größter Tischweg: 500 manuell mm surface of magnetic-table: 305 x 130 x 100 mm dimensions of grinding wheel: Topfscheibe 125 x 20 Ø 32mm mm total power requirement: 1,8 kW weight of the machine ca.: 1,0 t dimension machine xH: 1,6 x 1,3 x 1,7 m Lhsdpfeu Ng Npsx Ah Sok dimensions of hydaulic: 600 x 550 x 870 mm Accessories: Universal clamping head cone MK5 Drill grinding holder Ø 10mm *

Condition: used, Technical specifications: Max. grinding wheel diameter: 150 mm Dividing head for sharpening milling cutters, 24' Adjustable sharpening angle Manual feed Motor power: 0.3 kW Overall dimensions: Lhjdpfxszhufzs Ah Sjk Length: 700 mm Width: 800 mm Height: 1500 mm

Condition: used, Technical specifications: Max. grinding wheel diameter: 150 mm Indexing head for sharpening milling cutters Adjustable sharpening angle Manual feed Motor power: 0.3 kW Lhsdpfx Aszhud Rsh Sek Overall dimensions: Length: 570 mm Width: 320 mm Height: 600 mm

Condition: used, Technical data: Max grinding wheel diameter: 180 mm Indexing device for sharpening milling cutters Indexing device for sharpening circular saw blades Angle sharpening capability Manual feed Motor power: 0.5 kW Overall dimensions: Lhedpjzhud Defx Ah Ssk Length: 850 mm Width: 800 mm Height: 1550 mm

Condition: excellent (used), For sale: professional cutter and drill bit sharpener, model PP U3. Condition: very good, complete unit ready for operation. Included in the set: • Set of grinding wheels Lhedpoxdh Hqefx Ah Sok • Adjustable angular tool holder • Workshop lamp with flexible arm • Keys and clamping elements Specifications: • For sharpening cylindrical and spiral end mills • For sharpening step and cylindrical drills • Wheel linear speed up to 35 meters per second • Maximum noise level: 66 dB • Machine weight: 41 kg Solid, stable construction—ideal for precise tool machining. A reliable solution for tool rooms, CNC workshops, and machine shops.

Condition: refurbished (used), Year of construction: 2004, Completely overhauled Haas Multigrind HT grinding machine, available in Q3/2026. Used for re-sharpening of hobbing cutters / beveloid gear cutters / cutting rotors / form cutters / industrial knives / circular knives / spur gears / skiving tools, and other workpieces / components. Control system: Siemens 840 D X-axis: 650 mm Y-axis: 400 mm Z-axis: 280 mm A-axis (rotary table): 360° SK50 C-axis (rotary table): 270° X3-axis: electrically driven with tailstock Grinding spindle: HSK50 Dressing unit Tool changer: 10-position magazine Ljdpfx Ahomk Hhcs Sohk Coolant system: Turbo separator Extraction system: LTA CO2 fire extinguishing system Internal handling with workpiece pallet according to customer requirements Clamping devices according to customer requirements Additional accessories available ex-works Software can be customized according to customer requirements Pre-acceptance at the factory and commissioning, training, and final acceptance at the customer's site Financing / lease-purchase possible Changes possible

Condition: used, Year of construction: 2005, functionality: fully functional, machine/vehicle number: RX7_800074, total height: 1,905 mm, total length: 2,010 mm, total width: 2,508 mm, workpiece weight (max.): 20 kg, spindle speed (max.): 10,000 rpm, grinding wheel diameter: 202 mm, overall weight: 4,500 kg, power: 19 kW (25.83 HP), 5-axis CNC tool grinding machine – completely overhauled (X, Y, and Z axes, CNC). High-performance production machine with a polymer concrete bed (ANCAcrete), 19kW, 10,000/min spindle, and a dual disc changer for up to eight grinding wheels. PLX tool loader with 2 pallets, latest CNC generation, and the latest ToolRoom RN35 software installed. Optionally available with an extraction system and coolant system. !Offer only valid in Europe, Africa, and the Middle East! Lhsdpfx Aew Uf Sgjh Sjk