Cutter grinder buy used

Recognised location: Ashburn (US) (Change)
Enter e-mail address
or
Move
6
X-axis (column, long): 650 mm y-axis: vert. 270 mm z-axis: quer 270 mm workpiece dimensions max.: Dm=300 mm table - swiveable: 175 Grad Table dimensions: 1200x280 mm control: Helitronic Cip4 max. dia. of grinding wheel: 200 mm tool taper: SK50 rpm spindle (continous): 3500-4500;6000-9000 U/min interface: RS 232 Interface grinding head - swivable: horiz. 220 ° grinding head - swivable: vert. 360 ° centre height: 154 mm total power requirement: 23,0 kW weight of the machine ca.: 3,0 t dimensions e... more
3
Make: Amada Type: TOGU III Year of construction: 08/2000 Technical data -Tool diameter min/max: 2/160 mm -Maximum tool height: 150 mm (about three jaw Chuck) -Max looping delivery: 0.99 mm -Grinding motor delivery: 240 mm -Rapid traverse speed: 600 mm / min -Positioning speed: depending on size of station -Grinding speed: 0.06 mm / min (type A) to 0.03 mm / min (type E) -Coolant tank: 20 litres -Electrical power: 4.8 kVA, 400 V, 50 Hz Engine performance -Sharpening: 1,5 kW, 300... more
5
Tool grinding machine, flat grinding machine, grinding machine, grinding, universal grinding machine Delivery as is as seen -Machine is unpowered and is sold as spare parts carrier Angle adjustment Grinding device recording MK5 23c33chlq Disk d = 250 mm Drive kw Speed RPM Tip height mm Grinding length 400 mm Dimensions 900/900/H1350 mm Weight 344 kg more
3
Article number: MA1004 Manufacturer: Trumpf Type: 6840-H3 Year of construction: 1989 Machine number: 968 Length [mm]: 600 Width [mm]: 600 Height [mm]: 1800 Weight [kg]: Approx. 350 Power supply: 380V / 1,7KVA Accessories: All recordings available for multi tool stamps and matrices as well as stripper Msiof more
2
Schleif-Ý - max. 300 mm grinding length 400 mm workpiece length mm table surface area 900x400 mm table speeds 5-5000 mm/min swivellable 90 ° Bafxdy0obt stroke 400 mm grinding spindle speed 4n: 2100-600 U/min Schleifscheiben-Ý 150 mm grinding wheel motor 0,65/1 kW turning speed range U/min electrics - voltage/frequency 30/50 V/Hz total power requirement kW weight of the machine ca. ... more
3
Year of construction 1983 Good condition, regularly maintained and ran until recently in the production. The engine was used only in single-shift operation and was in the last few years approx. 10-20 hrs / week in use. The machine is still connected and can be demonstrated. Technical data: Grinding diameter of 260 mm Grinding length 610 mm Y-axis 230 mm Zaxis 280 mm Tip height 115 mm Swing diameter 260 mm Total power consumption 1.3 kW Machine weight approx. 1.4 t Space requireme... more
5
grinding diameter max.: 200 mm grinding length: 300 mm workpiece length: 400 mm table surface area: 650 x 110 mm max. workpiece size: ca. 150 mm min/max. table longitudinal travel: 300 mm/min table cross movement: 150 mm table swivelabel +/-: 45 ° feed of spindle: 150 total power requirement: 1,0 kW weight of the machine approx.: 750 kg space requirements of the machine approx.: L:1,2 x B:0,8 x H: 1,4 m adjustment of the grinding spindle head: height: 200mm; grinding spindle head is swivable. di... more
1
Make: Amada Type: TOGU EU Year of manufacture: 10/2013 Technical data -Tool diameter min/max: 2/160 mm -Maximum tool height: 150 mm (about three jaw Chuck) -Max looping delivery: 0.99 mm -Grinding motor delivery: 240 mm -Rapid traverse speed: 600 mm / min -Positioning speed: depending on size of station -Grinding speed: 0.06 mm / min (type A) to 0.03 mm / min (type E) -Coolant tank: 20 litres -Electrical power: 4.8 kVA, 400 V, 50 Hz Mt7rt0 Engine performance -Sharpening: 1,5 k... more
5
Grinder, angle grinder, turning tool grinding machine, thread drill grinding machine, milling cutter grinding machine Angle adjustment Grinding device Disk d = 150 mm Czi9oydoo Drive 0.5 kw Speed 2800 RPM Magnetic plate 250 x 100 mm Grinding length 290 mm 1050/800/H1600 dimensions mm Weight 294 kg more
6
x-axis 400 mm x-axis 400 mm feed 20 m/min y-axis 250 mm feed 20 m/min z-axis 580 mm feed 20 m/min A - axis 360 x 0,0001 ° turning speeds 100 U/min workpiece dia. max. 190 mm 7w30enk0f tool taper ISO 50 C-axis + / - 200 x 0,0001 ° table turning speeds 120 °/sec. grinding spindel dia. 70 mm max. dia. of grinding wheel 200 mm speed spindle max. 6000 U/min. power capacity 4,2 kW pump output 60 l/min 0 3 bar coolant tank 180 l total power requirement 15 kW weight of the machine ca. 3,2 t dimension... more


cutter gri...
every day

New machines via email!

Be informed!
6
SCHUTTE WU405 5 Axis CNC Tool Grinder Manuals, Wheel Arbors and Tooling, See photos Year: 1996 Longitudinal Slide Traverse - X-Axis: 400mm Cross Slide Traverse - Y-Axis: 260mm Vertical Wheelhead Traverse - Z-Axis: 280mm Work Headstock Inclinable - A-Axis: +/- 30 Deg. Swivels - A-Axis: 355 Deg. Speed Range - Work Headstock: 0-50 RPM 98tas3ouh Number of Divisions - Maximum: 999 Feed Range - X-Axis: 0.1 - 1000 mm/Min. Feed Range - Y-Axis: 0.1 - 1000 mm/Min. Feed Range - Z-Axis: 0.1 - 500... more
4
Description: Suitable to manufacture and regrind metal and woodworking tools of all kinds. Specifications: Working range: longitudinal traverse (X- axis) 480 mm, vertical traverse (Y-axis) 320 mm, cross traverse (Z-axis) 700 mm, rotary table swivelling range (C-axis) +/- 200°, work head spindle ISO 50, max. diameter of workpiece 320 mm, max. length of workpiece for peripheral grinding 370 mm, max. length of workpiece for face grinding 300 mm, max. dia. of wheel 200 mm, peak performance grinding... more
4
Lqzwngrinding length: 450 mm grinding diameter: 200 mm workpiece height: 220 mm spindle speed max.: 6300 U/min grinding wheel diameter: 200 mm grinding head vertical adjustable: 220 mm grinding spindle - swivable: 306 ° table surface area: 240x1000 mm table adjustment: schräg 7° re/li ° table travel longitudinal: 450 mm table travel cross: 260 mm total power requirement: 1,14 kW weight of the machine ca.: ca. 1,5 t space requirements of the machine approx.: T:1,5xB:1,6xH:1,5 m transport measur... more
6
Spindle speed infinitely adjustable up to 14000 RPM Grinding wheel diameter 125 mm Hsmw9wn Base with suction Weight approx. 1000kg more
5
Grinder, angle grinder, turning tool grinding machine, thread drill grinding machine, milling cutter grinding machine Angle adjustment Grinding device Disk d = 190 mm Drive 0.2 kw Speed 2800 RPM Dimensions 700/700/H1400 mm Qldedbi9g Weight 275 kg more
6
Grinding Diameter max 320mm Distance between centers 250mm Cross table 450x175mm Misc. accessories Baonknsm MARCELS MASCHINEN CH more
4
Grinding diameter: 250 mm Grinding length: 800 mm Table - clamping surface: 1180 x 200 mm H8keo77 Inclination after 2 pages: 90° Speed: 2100,3000,4250,6000 RPM various accessories more
1
Description: Mzjr7 Suitable for regrinding of spiral fluted or straight flutet tools and flat grinding via preinstalled standard grinding programs. Specifications: X-axis: 360 mm stroke, work piece spindle A-Axis MK5, Y-axis 250 mm stroke (manual), Z-axis 300 mm stroke (manual), spindle speed step-less adjustable 2000 - 9000 rpm., wheel dia. max. 200 mm, performance grinding motor 2.2 kW, connected load 2,2 kW (400 volts / 50 Hz), weight approx. 1600 kg, dimensions w x d x h = 1395 x 1565 x 19... more
5
voltage: 220/380 V current: 4,1/2,3 A height over floor: 1300 mm table - swiveable: 360 Grad table adjustment - upside direction: 130 mm Table dimensions: L:560xB:150 mm S8wfaqqtd throat: Tisch/tabel=150-400 mm total power requirement: ca. 1,0 kW weight of the machine approx.: 252 kg space requirements of the machine approx.: L:0,9xB:0,8xH:1,45 m table travel: x-axis (longitudinal) =480mm y-axis (transverse)=250mm z-axis(vertical)=150mm incl. accessories [...] more
1
Speed: 1450 RPM Motor power: 1,5 kW Facilities: Taixjbfuz Table angle adjustable / can be mounted with tool Sharpener more
5
Valve cone grinder, tool grinding machine, flat grinding machine, grinding machine, grinding, universal grinding machine Valve cone grinder Cross table Grinding device recording disc d = 120 mm Drive 0.15 kw Speed 2800 RPM 9h2jbwq0l Tip height mm Grinding length 400 mm Dimensions 900/900/H1350 mm Weight 344 kg more
4
Schütte universal grinding machine WU 305 Year of construction: 01/2008 Control: Siemens Sinumerik 840 d 4-way automatic changer for grinding wheels and coolant distributor kollisionsueberwacht Central lubrication system Software options: Basic package -Cylindrical milling cutter extension package -Tapered cutter package Step tools Additional option 2 gradients -Cylindrical nut with variable swirl expansion pack Level tools (incl. Modula 40) additional option bits Kennametal Her... more
4
Spindle speed 3750/7500/6500/13000 R/min 7z7p7locs with universal head of part of Lamp Base with suction more
6
grinding length: 450 mm centre height over plate: 125 mm workpiece length - max.: 600 mm grinding spindle - swivable: 350 ° grinding head adjustable: 15° re/li mm spindle revolutions per minute : 2200/3500/5200 U/min adjustment of spindle-head: quer/transversal 230 mm adjustment of spindle-head: vertical/vertical 250 mm grinding diameter: 250 mm work table:: 950x120 mm table movement: längs/longitudinal=500 kW table adjustment: 45° re/li ° dimensions of hydaulic: 0,6x0,5x0,9 mm total power requ... more
6
Table size 625x114mm Max.grinding diameter 225mm Bnwivmj Distance between centers 305mm LOTS OF ACCESSORIES!!! MARCELS MASCHINEN CH more
6
max. grinding diameter . mm Vrs33q grinding length . mm workpiece length . mm total power requirement kW weight of the machine ca. t dimensions of the machine ca. m more
4
For sale is a working tool and Cutter Grinder Oerlikon FS 21 Can be viewed under power and tested. G8t80h If you have further questions please call sign. Loading or delivery possible more
3
max. grinding diameter 260 mm grinding length 610 mm workpiece length 680 mm y-axis 230 mm z-axis 280 mm 8saxhengm centre height 115 mm swing dia. 260 mm total power requirement 1,3 kW weight of the machine ca. 1,4 t dimensions of the machine ca. 2,7 x 1,8x 1,8 m YOM in mid 1990, in 2010 completely modernized with new CNC control - speed of the workpiece (division) 1-100 rpm - number of divisions max. 999 - Feeds X axis 0.1 - 12,000 mm / min - Feeds Z axis 0.1 - 2000 mm / min - Solution in ... more
6
workpiece diameter 305 mm weight of the machine ca. 2,2 t dimensions of the machine ca. 3050 x 1940 x 2110 m Ccfihqga Maximum Workpiece Diameter 12 inch Front Edge of Indexing Spindle - Tailstock Center 27.5" Maximum Distance Between Centers w/Indexing w/Indexing head center inserted 24" Center Height 6.1" Maximum Table Traverse 22" Maximum Grinding Travel (depending on workpiece size) 18" Infinitely Variable Table Speed 0-40"/min 3-Stage Grinding Spindle Adjustment from the Radial pos .8"-3... more
6
5 axis CNC Control: NUM 1062 Original was screen through ext. replaced Probe HyD. Chuck Baihgfycgj various accessories Strausak Modulsoft NSW 405 with an external PC-win XP & screen more
3
max. grinding diameter 0 mm grinding length 0 mm workpiece length 970 mm total power requirement 12 kW weight of the machine ca. 5 t dimensions of the machine ca. m H9hygypyo more
5
We offer a used tool and Cutter Grinder: Spinner SM 100-C BJ. 2006 Included accessories: 5 PCs. collet chucks 1 dressing diamond 4 Schleifscheibenschnellwechselflansch 1 wheel aluminium oxide 1 grinding Silicon car bit 1 diamond grinding wheel form 1, coarse 1 diamond grinding wheel form 1, fine M7cu7 The machine is in like new condition only used demonstration more
3
For sale is a plant show grinding machine Oerlikon Engine runs well and can be tested immediately. If you have further questions please call sign. 9itbj8awc Loading or delivery possible more
6
max. grinding diameter 260 mm grinding length 610 mm workpiece length 680 mm y-axis 230 mm z-axis 280 mm 8t7tm0wgv centre height 115 mm swing dia. 260 mm total power requirement 1,3 kW weight of the machine ca. 1,4 t dimensions of the machine ca. 2,7 x 1,8x 1,8 m YOM in mid 1990, in 2010 completely modernized with new CNC control - speed of the workpiece (division) 1-100 rpm - number of divisions max. 999 - Feeds X axis 0.1 - 12,000 mm / min - Feeds Z axis 0.1 - 2000 mm / min - Solution in ... more
6
max. grinding diameter 260 mm grinding length 610 mm workpiece length 680 mm y-axis 230 mm z-axis 280 mm centre height 115 mm swing dia. 260 mm total power requirement 1,3 kW weight of the machine ca. 1,4 t dimensions of the machine ca. 2,7 x 1,8x 1,8 m YOM in mid 1990, in 2010 completely modernized with new CNC control - speed of the workpiece (division) 1-100 rpm Fzysmx9 - number of divisions max. 999 - Feeds X axis 0.1 - 12,000 mm / min - Feeds Z axis 0.1 - 2000 mm / min - Solution in X,... more
A used tool and Cutter Grinder Laeppmachine Drehstahl Sander is sold The machine has a 380V-Anschluss/three-phase, it is ready for operation and can be demonstrated. The machine is sold, all as shown. Sale is for legal reasons as defective. Can be used for shipping 9u9m3hmub free to be mounted on a pallet. more
Tool grinder cover S1. With very extensive accessories Details request. Cjzuqrxu more
6
x-axis 600 mm feed 12 m/min y-axis 300 mm feed 10 m/min z-axis 235 mm feed 10 m/min A - axis 360 x 0,0001 ° turning speeds 100 U/min workpiece dia. 260 mm tool taper ISO 50 Jg99ttd2 C-axis + / - 200 x 0,0001 ° grinding spindel dia. 80 mm max. dia. of grinding wheel 200 mm speed spindle max. 3200/7600 U/min. power capacity 5,5 kW pump output 65 l/min total power requirement 20 kW weight of the machine ca. 3,2 t dimensions of the machine ca. 2,1 x 1,5 x 2,2 m 5-axis tool and cutter grinder ... more
6
HARO - tool and Cutter Grinder Fxc7l2g Grinding diameter: 260 mm Grinding length: 380 mm Quill recording: MK4 Speed grinding wheel: 1500 & 3000 rpm (both directions) Table movement x axis: 500 mm Table movement Y-axis: 230 mm Tool holder adjustment X-axis: 780 mm Tool holder rotation horizontal: +/-90° Tool holder rotation vertical: +/-45° Cutterhead rotation horizontal: +/-90° Cutterhead rotation vertical: +/-45° Table: 1400 x 230 mm Voltage: 400 V Dimensions: 1400 x 1400 x 140... more
5
TOOL AND CUTTER GRINDER A R 5 E USED with much accessories 92dsevqsi SEE PICTURES more
4
> - Top condition! -< (Training machine training workshop IHK Regensburg) Univ. tool grinding machine model etc 3 Color: Green RAL 6011 Pu, 0.7/0,85 kW, n = 1400/2800. No. 2846708, Kod 648 with standard accessories. Special Accessories: 1 driver disc 1 supports adapters 1 machine vise 1 locking bracket Bnjwb8xa 1 Univ. Truing device 1 diamond with threaded version 1 plug-in thorn Mk4, Aussenanz.Gewinde 13x80mm 16x80mm 27x80mm 1 Collet, 23 mm shank 3-5-6-8-9-10-11-12-20 m... more
5
2 speeds motor swivel 90-0-90 degree grinding head swiveling lining with locking cross table adjusting to the exact suitable to the router, grinding drills and chisels 2mhticszj more
1
CNC FANUC 15 M,. 9pdlzlyfd Workpiece spindle SK 50, suitable to the forehead, Nutschleifen, sharpening and back loops of milling tools, Doppelschleifspindel and loaders. Grinding spindle speed continuously 2000-8000 RPM. Cone SK 50 A-axis and C-axis high precision gears with increased speed Full space encapsulation hydraulically operated tailstock in 2 axes (X and Y) Hydraulic Truing device Grinding spindle motor 6 kW Weight approx. 2,5 t more
6
S1 tool grinder COVER in good condition, including abrasives. Height approx. 1, 2 m Mll3v Floor area approx. 0, 5 x 1, 2 m Approximate weight 0,5T Transport can be arranged, shipping incl. I help with questions like. more
6
at my company, you can complete the tool grinder with accessories that you need. 9lufwfxua more
2
Tip height 115 mm,. Sptzenweite 500 mm,. Table size 870 x 112 mm Cvxdorku Inclination after 2 pages 12 ° / 90 ° Inclination of the spindle head of nac 2 pages 360° Weight ca. 800 kg more
6

Tool & Cutter Grinder Jones & Shipman 310T

Burgess Hill, West Sussex, RH15 8QY United Kingdom
5943 km
1989
USED
Indexing Drum 8o8rozae8 £4,950 more


cutter gri...
every day

New machines via email!

Be informed!

to

to

Change search
CUTTER GRINDER
SELL IMMEDIATELY
on Europe's market leader for as little as € 0,79 per ad.
Find out more now


Phone: +44 (0) 20 806 810 84
or sell immediately
Try our Machineseeker app now!
Machineseeker app for iPhone and Android.
Want to really stop the chat history?
Yes No
×
Machine Finder chat
Name E-mail Your message to the Dealer
START CHAT WITH DEALER
  You are chatting with: 
  Your contact person: 
  
Your contact is typing
SEND MESSAGE
  You are chatting with: 
  Your contact person: 
  
Your contact seems to be inactive
Chat window close