Used Groove Cutter for sale (4,353)

Condition: used, 250 x 16 x 40 mm Bsdpfx Aaslf I Ilsqsww

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 420x570x370 mm Weight 12 kg Bedpfx Asv A Hxtsaqsww Total power requirement 0,85 kw

Condition: used, usedfunction checkedwith foot pedal4 Wlocated in 97447 Gerolzhofensale in current condition as seen- free on truck - Bsdpfjvwfvyex Aaqoww

Condition: used, d: 50 mm overall length: 115 mm D: ca.180 mm profile height: approx. 55 mm groove size: approx. 4 x 10 mm consisting of: Bwjdpfelf I Hnex Aaqjw 2 milling cutters / intermediate ring(s) / hydro bushing.

Condition: used, Available: 2 220 x 14.5 x 70 mm Z8 + 8 Bwsdpfx Aolf I Iheaqow

Condition: used, overall length: 110 mm d: 50 mm Bodpfx Ajlf Na Tsaqsww D: about 190 mm profile height: approx. 55mm (2 x 29mm) groove size: approx. 5 x 8 mm consisting of: 2 milling cutters / intermediate rings / hydro bushing.

Condition: reconditioned (used), CUTTER Model: SWV 330-S Vacuum TIPPER TIE 2007/2008 - MACHINE AFTER GENERAL OVERHAUL Bodpfx Aajt Sv Uloqoww THIS IS THE MODEL - TIPPER TIE ALPINA AG WITH A NEW CONTROLLER - ALL SPARE PARTS ARE AVAILABLE FOR THIS MODEL. Height: 2250 mm Width: 3300 mm Length: 2800 mm Capacity: 330 l Bowl construction - stainless steel Knife construction - stainless steel Electric power supply: 400V 50Hz 3N Total power: 141 KW - Knife rotation: 540/960/1930/2880/3850/4050.-smooth adjustment - Bowl rotation: 3.5 / 6.5 / 10 / 13.5 - Mixing speed: -70/120 - bowl rotates to the left - Power: 141 kW - Weight approx. 7800 kg - Number of knives – 6 pcs. - THE MACHINE HAS A 3-MONTH WARRANTY ON MECHANICAL PARTS

Condition: good (used), Year of construction: 2002, machine/vehicle number: Egli V1, Make : EGLI Model : V1 Usage : Frozen Block cutter for butter and similar products High speed Cutter Electrics : 3~ / 400 v/50hz Air : 6 bar -8bar Safety Door with air operated actuator Bsdpfjfmgv Hex Aaqjww The machine is used by adding in the butter blocks and the door closes automatically, the piston applies pressure to the block pushing this towards the cutting divide that rotates at high speed . The butter pieces are dropped below the machine into stainelsss steel hopper or silo .

Condition: good (used), Corner cutter Karl Tranklein EK-100 Bsdpfxswunm Ue Aaqsww Production Germany. Very good condition. This is a professional, production device for rounding corners. Solid cast iron construction, strong pressure ensure precision of operation. Replaceable knives. Adjustable margins. One set of knives included. Stack height 100mm Weight 130kg Efficiency 50 cycles/min Power supply 400V Waste is directed to containers. This is the currently produced model.

Condition: used, Bertuetti Universal Dough Cutter. In working condition. With two dusters. Belt 400mm wide One additional cutter included. Needs a coat of paint. Bedpfxetpvt To Aaqoww

Condition: excellent (used), Year of construction: 2019, The machine is in very good condition – the latest model is designed for poultry slaughter and initial processing, ensuring a capacity of 13,500 birds per hour. Technical Specification Model: 20x6" Capacity: 13,500 birds/hour Live weight: 1.2-4.0 kg Number of units: 20 Shackle pitch: 6" Length (X): 2508 mm Height (Y): 2985 mm Width (Z1): 1693 mm Iebttsv Au Nge Shdfoar Width (Z2): 3092 mm Width (Z3): 2580 mm Weight: 1535 kg Water consumption: 1.0 m³/h Water connection: High pressure: 40 bar; Medium pressure: 8 bar; Low pressure: 2-3 bar Water inlet: 3/8" BSP Drain connection: DN100 BSP Bwsdpfxjwdic Aj Aaqew

Condition: refurbished (used), Year of construction: 2009, Rex stainless steel bowl cutter Capacity 125 litres With unloader arm and disc Bwodpfst Da Elsx Aaqow 2 speed knife shaft 1,500 / 3000 rpm 3 speed bowl Safety interlocked lid Currently being refurbished

Condition: new, Hiwell cut-28 2020 Brand new 2020 model Hiwell portioning machine, contact us for a demo. For years Hiwell has been developing a portion-cutter with the Cut-28II as a result. Very accurate fixed weight or fixed size portion cutting with the accuracy and consistency of it’s European rivals. This machine is capable of portioning meat, fish and poultry up to a thickness of 50mm and 240mm wide. With a portioning accuracy range higher than ᐳ98%, capable of making 1000 cuts per minute. Comes with a strong modular belt that will last long. Controlled by SIEMENS electrical parts, with CE approved safety protection. HACCP standard easy operation, low maintenance cost. General information Model CUT28-IV Belt width 254mm Belt speed 5~20m/min Weight error ≤2% Cutting speed 1000 cuts/min Max. product height 50mm Max. product length 650mm Max. product width 240mm Input/Output height 1050±50mm Power 7.55kW Bwsdpfx Asfg U Hfjaqow Overall dimension 2512×1200×1680mm

Condition: new, functionality: fully functional, power: 3 kW (4.08 HP), Year of construction: 2025, Equipment: air conditioning, cooling unit, G16 Bsdpowz Ufwofx Aaqoww Type: Two chucks

Condition: good (used), Corner cutter OMM Vicking 3 Automatic Bwjdpfewund Hsx Aaqew Production Italy. Perfect condition. This is a professional, production device for rounding corners. Solid cast iron construction, strong pressure ensure precision of operation. Interchangeable knives. Adjustable margins. A knife with a radius of 7 mm is included. Stack height 40 mm Weight 78 kg Power supply 230 V This is the currently produced model.

Condition: new, Mobile lift for cutter cart Made of stainless steel Lifting weight: 200 kg Dimensions: 1160x800x2900mm Electrical power: 0.75kW Bsdpfx Aovtzzkeaqjww Voltage: 220V 50Hz

Condition: new, Year of construction: 2025, pipe diameter (max.): 12,000 mm, travel distance X-axis: 12,000 mm, Equipment: cooling unit, safety light barrier, Three-chuck Heavy-duty Fiber Laser Tube Cutting Machine Bwedpfx Asv D Uhfeaqow NS-12052HG 12000mm, 500 Chuck Servo drive is used for auxiliary feeding High-quality chuck Adaptive to different sizes of tubes Servo control, excellent performance Give the equipment ultra-high dynamic performance Auxiliary feeding system Reduce work intensity and improve efficiency More types of processed tubes Support flying cutting High-precision Z-axis control Bevel cutting Highly automated ≤2m workpieces are unloaded through servo flaps

Condition: good (used), Double side corner cutter Very good condition. This is a professional, production device for rounding corners. Solid construction ensures precision of operation. Bwodpfewungzjx Aaqow Two trimming heads. Interchangeable knives. Adjustable margins. Controlled by foot pedal. One set of 8mm knives included Stack height approx. 80mm Weight 100kg Efficiency 20 cycles/min Compressed air supply.

Condition: new, Pillar lift for cutter cart Made of stainless steel Lifting weight: 250 kg Bwodpfx Aaevtz U Rjqsw Dimensions: 1520x1300x2740mm Electrical power: 1.1kW Voltage: 380V 50Hz

Condition: new, functionality: fully functional, Year of construction: 2025, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, 3015H high-speed laser sheet metal machine High speed enables efficient processing 1.5G acceleration 50%–100% increase in thin sheet processing efficiency 7Hz low-pass filtering Enables high-speed, high-precision cutting of complex shapes Over 50% improvement in fine processing efficiency High speed and high efficiency drive high productivity Our high-speed cutting machine features a dual-station high-speed shuttle table Achieves 15-second fast parallel exchange Loading/unloading and cutting processes run simultaneously without interference significantly boosts processing efficiency Doubles output per unit of time Crafted with care for eco-friendly design Equipped with zoned dust extraction Bodpswvpcmofx Aaqeww Features 8–30 fully automatic high-power negative pressure extraction systems Smooth smoke discharge and excellent dust removal efficiency In terms of safety, our high-speed machines are more considerate Standardized with an industry-unique intelligent anti-collision human detection system Includes door interlock protection and motor torque detection Ensures safe production Designed to reduce the workload in sheet metal processing Equipped with a fully automatic lubrication system A total of 16 automatic lubrication points across the XYZ axes Extends component lifespan by 300% Delivers higher running precision with lower maintenance costs

Condition: new, Cutter cart Made of stainless steel Bsdpfjvt Aicjx Aaqsww Dimensions: 600x600x500mm Volume: 200 liters

Condition: new, functionality: fully functional, Year of construction: 2025, control type: CNC control, actuation type: electric, laser type: fiber laser, laser power: 20,000 W, input voltage: 380 V, input frequency: 50 Hz, warranty duration: 24 months, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, Equipment model: NS12056FG Bwsdpjww Umasfx Aaqsw Maximum length of pipe:

Condition: new, functionality: fully functional, Year of construction: 2025, table length: 15,560 mm, table width: 4,120 mm, table height: 2,600 mm, working length: 6,020 mm, working width: 2,530 mm, travel distance X-axis: 2,530 mm, travel distance Y-axis: 6,020 mm, travel distance Z-axis: 450 mm, type of input current: three-phase, overall weight: 14,200 kg, warranty duration: 24 months, working range: 6,025 mm, Equipment: cooling unit, documentation/manual, safety light barrier, All New Full Cover Fiber Laser Cutting Machine | GS-CE PRO Series | 6000-40000W MACHINE AVAILABLE ON HAND This GS-CE series FULL COVER FIBER LASER CUTTING MACHINE offers maximum safety for metals cutting. Thanks to its full cover structure and protective glass observation window, you can observe the operation and avoid hazards such as laser radiation, sparks, etc. It also has a fast exchange table, and the exchange is within 10s. It will be your ideal solution for safe and efficient metal cutting! Working platform size: 3000mm*1500mm, 4000mm*2000mm, 6000mm*2000mm, 6000mm*2500mm;8000mm*2500mm;12000mm*2500mm; Laser power 6KW-40KW GS-6025CE PRO Max. Acceleration：3G Intelligent anti-collision function Automatic lubrication Laser fault alarm Cooling fault alarm Laser protection glass Water cooler TÜV CE certificate Optional function: automatic loading and unloading system Control unit supports graphic formats: AI, BMP, Dst, Dwg, DXF, DXP External programming Bwedpfxjvzwh Nj Aaqjw System complete incl. cooler, extraction system and safety light barriers Demonstration machine as good as new

Condition: new, functionality: fully functional, Year of construction: 2023, laser power: 3,000 W, power: 3,000 kW (4,078.86 HP), input voltage: 380 V, input frequency: 50 Hz, type of cooling: water, total length: 6,000 mm, warranty duration: 24 months, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, NS-6022HG Tube laser cutting machine 3kw 3 Chuck Professional Pipe Laser Cutting Machine with automatic loading system with 6m automatic unloading with Chinese 3D bevel head-BLT Bedpfxewu Rm Rj Aaqeww tubes T CE Anti-radiation glass protective guards AVR KIT OF NOZZLE, LENS ETC(SPCS FOR EACH) Series: NS-HG Type: Three chucks Groove function: Standard Power: 3KW Maximum pipe length: 7000mm Round pipe: Φ15mm-Φ220mm Square pipe: 15mm*15mm~150mm*150mm Rectangular pipe: 30*20mm~160*80mm Oval tube/flatoval tube: Short axis≥15mm, long axis ≤ 210mm Channel steel: Max20# I-beam: Max18# H steel: Max175*90mm Maximum acceleration: 1.0G Chuck maximum speed: 100r/min Machine weight: 10t Power supply specification: 380VAC, 50Hz Standard: Support servo (groove), dust prevention (Y axis), dust prevention (X axis), dust prevention (Z axis), safety fence (light curtain), zero tail material, cutting area dust removal, rear card hollow dust removal

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 6998, center height: 305 mm, workpiece diameter (max.): 400 mm, workpiece length (max.): 1,600 mm, Tool grinding machine with automation! TECHNICAL DETAILS Maximum machining diameter: approx. 400 mm Maximum center height: approx. 305 mm Maximum machining length: approx. 400–1,600 mm MACHINE DETAILS Electrical Data Connection voltage: 3x400 VAC Bwodpfxexqqu Ro Aaqow Mains frequency: 50 Hz Nominal current: 81 A Control voltage: 230 VAC / 24 VDC EQUIPMENT Multi-wheel configuration with 2–4 grinding wheels (wheel diameters 610/760 mm or 400/500 mm) Monolithic cast iron machine bed Coolant channels for thermal stability and vibration damping Automation: Promot Automation EPL Workpiece types: shafts, bearings, spindles, polygonal/non-round workpieces