Tool and Cutter Grinder

WMW GOTHA SWU 250 I

Condition: used, • Load capacity 350 kg • 6 vacuum suction cups, 250 mm diameter, adjustable • Vacuum lifter can rotate 90° and tilt 90° • Suction cups with guide tube and electric trolley • 4 units available, brand new and unused • Immediately available IV: + Design Standards 1. The construction of the unit strictly complies with European CE standard EN13155:2016, American ASME (Mechanical Engineering Association) B30-20-2006, and German UVVI8 regulations. The key design parameters exceed the requirements of the aforementioned standards. 2. Safety factor: The main structure features a factor of 4.0, vacuum safety level is 65%, and the standard safety level is 85%, which is 20% above the standard safety requirement. Iiodjxnvq Eepfx Ad Rsb V+ Equipment Inspection and Standards 1. General Check that all materials are complete, inspect if the equipment exterior is painted or scratched, check for damage to the suction cups and pipes. 2. Pre-shipment Inspection © Equipment suction test © Equipment pressure holding test © Alarm system test © Various control components • Price on request

Condition: good (used), Make: OMERA Iijdpfx Ajkvnumsd Rjb Type: R4 / 12-2 Year: 1976 Table length : 1900 Table width : 1000 Steady arm throath HOR : 670 Steady arm throath VER: 940 Stroke cylinder : 350 Column diameter : 200 Specifications Metric US Standard There are no specifications for this machine (yet). Dimensions (Estimate) Length 3000 mm Width 2200 mm Height 2500 mm Weight 2800 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Year of construction: 2022, condition: new, Load capacity: 10.000kg Iijdpfx Aofxgp Usd Rjb Speed: 0.03- 1.6 rpm faceplate diameter: 1.500mm, expandable to 2.500mm welding current transmission: 800A

Condition: used, Year of construction: 2003, CNC Tool Grinding Machine Schneeberger NORMA CFG Year of manufacture: 2003 Center height: 210 mm Table length: 950 mm Table width: 310 mm Travel X-axis: 380 mm Travel Y-axis: 280 mm Travel Z-axis: 280 mm Grinding wheel diameter: 50–200 mm A-axis grinding head rotation: 360° C-axis tool rotation: 340° C-axis spindle resolution: 0.001° Tool holder: HSK 50 Grinding spindle speed, stepless: 0–9000 rpm Iisdpfx Adoxz R T Ue Rsb Hydraulic unit: 6 bar Connection: 3×400 V / 50 Hz Spindle power: 7.5 kW Total power requirement: 33 kVA Machine weight: approx. 5,500 kg Machine dimensions Length: 1,930 mm Width: 1,590 mm Height: 2,250 mm Control system: GE Fanuc Series 16-M Accessories: various grinding wheel mounts and tool holders Max. operating current: 3×40 A No guarantee is given for the accuracy, completeness, or timeliness of the information.

Condition: used, Year of construction: 2014, total height: 2,400 mm, total length: 4,500 mm, total width: 2,200 mm, Colour: Grey Empty weight: 2.500 kg CNC Machining Center Biesse skill 12 24 G FT Year of construction 2014 Machine no. 60961 Recording HSK F63 10x vertical drilling 12 switch positions Software: BiesseWorks X axis 2465 mm Y-axis 1260 mm Z axis 324 mm Disassembled for transport on normal trailer; 4500x2200x2400mm; Own weight 2000kg - Details: - └ Description: Pallet with white control box does not belong to this machine - Year: 2014 - Documentation available: Yes - CE certificate present: No - Serial number: 60961 - Number of milling spindles [pcs.]: 1 - Type milling table: Flat table - Drilling unit present: Yes - └ Vertical drilling spindles [pcs.]: 10 - Tool changer positions [pcs.]: 12 - Vacuum pump present: Yes - └ Number [pcs.]: 1 - └ Brand: Becker - Working range X [mm]: 2465 - Working range Y [mm]: 1260 - Z-axis working range [mm]: 324 - Transport dimensions: 4500mm x 2200mm x 2400mm (l x w x h) - Transport weight [kg]: 2500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Iodpfxjwnhano Ad Rjib Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: used, Year of construction: 1994, Technical details: number of spindles: 8 Iodpfx Ajl Su Rxod Rjib spindle passage: 32 mm Article: cam-controlled multi-spindle automatic lathe Manufacturer: Schütte Type: AF32 S DNT Yob: 1994 Eight-spindle automatic lathe with 8 main spindles max. nominal diameter D=32mm control: Siemens SIMATIC S7 electronic cam control Balluff gripper in position 8 for backworking CNC cross slide position 6 CNC cross slide position 7 Workpiece belt Coolant cooling Schimpke Chip conveyor with magnetic separator Tapping couplings The tooling shown may differ from the scope of delivery! Please, contact us for getting more information and pictures on mail(at) or *

Condition: new, carrying capacity 500 kg number of suction cups 6 suction cup dia. 215 mm Vacuum lifter VH 6-500 for the horizontal transport of smooth, dry and airtight panels. Robust supporting structure made of steel, painted in RAL 2000 with low Own weight. consisting of: - 1x galvanized longitudinal beam with a length of 2,400 mm - 3x galvanized crossbeams with a length of 1,000 mm - 6x Springy, articulating and adjustable suction cup holders - 6x suction cups Ø 215 mm, the seal can be separated in case of wear whose metal supports can be changed inexpensively and without tools - 6x ball valves to switch off individual suction cups, thus also smaller formats can be lifted without having to move suction cups or traverses. - 1x spiral connection cable small helix: Iisdpfxeq Sc Aus Ad Rsb * with an extension length of 3,500 mm, designed as an extension cable with CEE plug and coupling. * is routed to the lifting device next to the load chain. - Low-maintenance, very high-quality, dry-running rotary vane vacuum pump a suction capacity of 8 m³/h and a final vacuum of 85% (150 mbar) - Electrical connection: 3 phases 230/400 V + PE, 50 Hz, with cable (approx. 0.5 m long) and CEE plug (16 A). Integrated into the control with isolating transformer (necessary if the vacuum lifter is connected via the crane trolley and this has no neutral conductor) - Operating handle can be extended to 1,000 mm from the center of the traverse. Sturdy sheet metal bag for your crane control incl. at no extra charge. - Operation "suction / release" using manual slide valve: The wear-free and very robust manual slide valve ensures safe Suction and release after pressing the release button. (twice loosening according to EN 13155) - Control and safety device for vacuum lifters: * Robust control box. * Contactor circuit for the vacuum pump. * Safety warning device with audible alarm. * Vacuum gauge with danger zone indicator. * Large vacuum storage tank with safety check valve * Double actuation when releasing the load. - Fine dust filter to protect the vacuum pump - Detailed and easy to understand documentation. One year warranty against material and manufacturing defects One-shift operation (without wearing parts). Initial test UVV 18, VBG 9a with CE declaration of conformity - according to EN 13155 - Packing for truck transport.

Condition: used, Year of construction: 1992, spindle speed (min.): 7,500 rpm, spindle speed (max.): 24,000 rpm, 4 motorized grinding spindles (liquid-cooled, purge air / oil mist lubrication) including REFU HF frequency converter, e.g. for powering the spindles of a Voumard 400 CNC T4. Grinding spindle GMN TSSV 170-7500 7,500 rpm, 350V, 19.3A, 7.5kW, 250 Hz Grinding spindle Voumard BM15-170 15,000 rpm, 350V, 35A, 18kW, 250 Hz Grinding spindle Voumard BM18-15032 18,000 rpm, 350V, 28.5A, 12kW, 600 Hz Iijdol Tn Afjpfx Ad Rjb Grinding spindle Voumard BM24-150 24,000 rpm, 350V, 27A, 12kW, 800 Hz REFU HF Converter 316/25 High-frequency converter (inverter, frequency inverter) Frequency converter / inverter for powering motor spindles GMN tool spindle, motorized grinding spindle The spindles are fully functional, sold as is – manufacturing year approx. 1992 A collection of various grinding spindle shafts / arbors for grinding wheels is available for these spindles and can be purchased separately. Price / details on request All technical data subject to error or omission. We sell exclusively to countries within the European Community.

Condition: excellent (used), Year of construction: 2019, operating hours: 19,200 h, functionality: fully functional, machine/vehicle number: 90514 2019, saw blade diameter: 710 mm, tooth pitch: 55 mm, grinding wheel diameter: 200 mm, total width: 2,662 mm, total length: 2,540 mm, total height: 2,640 mm, type of input current: AC, input current: 10 A, input frequency: 50 Hz, disc diameter: 200 mm, grinding wheel bore: 32 mm, grinding spindle motor power: 3,000 W, saw blade width: 8 mm, input voltage: 400 V, overall weight: 3,200 kg, saw blade bore: 80 mm, power: 10 kW (13.60 HP), grinding diameter: 710 mm, workpiece diameter (max.): 710 mm, Equipment: rotational speed infinitely variable, CNC saw blade sharpening machine with chip divider grinding device and saw blade magazine up to D=560mm for unmanned operation. In manual mode: 40-710mm. Saw blade magazine with 3 mounting arbors. Oil filtration system suitable for HSS and carbide (HM), oil cooler brand Polar 2.9. Tooth profiles for HSS: Form A, B, BW, C, and special profiles. TK saw blades can be ground in diameters from 200-500mm. The fire extinguishing system is an oil retrofit kit with aerosol extinguishing generator. Equipped with electrostatic air extraction. Iisdpfsxuq I Esx Ad Rjb

Condition: like new (used), Year of construction: 2015, functionality: fully functional, Tool Milling Machine Kunzmann WF 600M with Heidenhain TNC 128 Control System | Excellent Condition | CE-Compliant! Technical Data: - Year of manufacture: 2015 | Machine No. 610398 - Milling table clamping surface: 800 x 425 mm - Clamping slots: 6 - Slot width: 14 H7 - Slot spacing: 63 mm - Maximum load: 300 kg - Spindle speed range: 1 – 4500 rpm - Infinitely variable feed: 0–2000 mm/min - Rapid traverse (X and Y axis): 5000 mm/min Isdpswz Eu Njfx Ad Rsib - Z axis: 4000 mm/min - Travel (X/Y/Z): 600/400/400 mm - Vertical and horizontal quill: SK40 - Hydraulic clamping system - Weight: approx. 2025 kg - Dimensions (L x W x H): approx. 2 x 2 x 2 m - Main drive motor: AC three-phase motor - Power rating at 100% duty cycle Accessories and Equipment: - Heidenhain TNC 128 control system - Hydraulic clamping, vertical and horizontal - Automatic central lubrication - Spindle brake - Technical documentation, spare parts diagrams, operating manual - Coolant system About the Machine: Offered here is a tool milling machine Kunzmann WF 600M equipped with a Heidenhain TNC 128 control system. The TNC 128 provides numerous dialog-guided cycles with graphical simulation for quick and easy data entry, such as various drilling cycles, tapping, bolt circles, linear hole patterns, rectangular pockets, rectangular tenons, and surface facing. This universal milling machine is in like-new condition. The control system is very easy to operate. Additionally, the machine features hydraulic clamping for both vertical and horizontal operation. Switching from vertical to horizontal is very simple by swiveling the vertical head to the side. The guides are regularly lubricated by the central lubrication system. The Kunzmann has been mechanically and electrically tested at our facility. You are welcome to view and test the Kunzmann under power on-site.