TIRELLI KS12/660 Rinser (2003)

TIRELLI Rinser

Year of construction: 2026, condition: new, The fruit washer with a mill for fruits and vegetables is made entirely of stainless steel and is equipped with a sorting grate, a washing tank, and a conveyor belt. The fruits are immersed in water for a pre-wash. Afterwards, they are transported further via the conveyor belt, which thoroughly cleans the fruits with fresh water. After cleaning, the fruits enter the mill, where they are processed with the desired sieve to achieve the required mash consistency. • Easy to clean • Low maintenance requirements • Belt speed is steplessly adjustable in both directions • Equipped with 2 swivel wheels • Equipped with 2 fixed wheels Technical Information • Nominal capacity: 2000 kg/h • Power requirement: 3 kW, 400 V, 10 A Gjdpfxov Srgue Al Usbu • Mash discharge height: 1400 mm • Connection for washing tank: G 6/4” • Connection for cleaning: G ½” • Material: WNr. 1.4301, AISI 304 stainless steel • Water consumption: approx. 12 L/min Dimensions: Length: 2700 mm Width: 840 mm Height: 2270 mm Weight: 150 kg

Condition: good (used), 50-position filler with crown cap closure. Used in a winery for filling wine into 1L glass bottles Gbedpfxovq Suis Al Usu

Condition: used, Year of construction: 2018, Overview  The Gruber AFD6 is a filling machine for bottles and party KEGs that was produced by the German manufacturer Gruber in 2018 and has an operating time of 725 hours. The machine is available immediately. Technical details - Output - 800 bph (at 0.33l) - 750 bph (at 0.5l) - 600 bph (with 1.0l) - 400 bph (for 2.0l) - 240 bph (with 5.0l party KEG) - Output varies depending on CO2 content and beer temperature (in practice, 1,000 bph could be achieved at 0.33l) - Long tube filler with 6 filling points - Fully automated filling process - Single or double CO2 flushing Gbjdpfsu I Hr Uex Al Usu - Siemens S7 control system with touch panel - Operating hours: 725 hours

Condition: new, machine/vehicle number: 190040019, Inclined conveyor belt (4,000 x 390 mm) Inclined conveyor belt with direct drive and PU-PVC belt Gedpstvfb Nefx Al Usbu

Condition: reconditioned (used), Year of construction: 2018, STORK VS 24/8 Monobloc Bottling Line, fully refurbished by the professional company Z.M. ROBAK. The machine is virtually unused, with the protective film still on the housing. Currently, it is set up for filling glass containers – it has been test run for bottling alcohol. Filling valves: 24 pcs (with light vacuum for still beverages) Capping heads: 8 pcs (configured for aluminum screw caps) Output: approx. 7,000 bph (700 ml) Capable of operating with bottles of the following dimensions (after format adjustment): - Diameter: 45 mm to 110 mm - Height: 105 mm to 400 mm - Standard neck diameter: 28 mm - Optional neck diameter (after format change): 18 mm to 43 mm Machine dimensions: - Width: 2,900 mm - Height: 2,200 mm - Depth: 2,200 mm Weight: 3,200 kg Installed power: 5.5 kW Required air pressure: 0.6 MPa Year of manufacture/modernization: 2018 – has not been used in production since refurbishment Condition: The machine is practically as new, with negligible signs of use. Gbodpfx Alou Nhiqj Ueu The machine comes with original electrical documentation.

Year of construction: 2026, condition: new, The pasteurization system is fully automated with an industrial control system and touchscreen operation. If the temperature of the juices to be pasteurized drops below the desired temperature, the outlet side of the machine is shut down, and the juice is directed through the bypass until the desired temperature is reached again. Filling can then resume. At the end of the cycle, the spiral pipe can be easily cleaned with a sponge ball. Our system is low-maintenance. Gbjdev Srl Repfx Al Usu ⚙️ Technical Information Rated capacity: 400 L/h Power requirement: 27 kW, 400 V, 40 A Material: Wnr. 1.4301, AISI 304 stainless steel Water buffer: 80 L Dimensions: Length: 760 mm Width: 714 mm Height: 1637 mm Weight: 170 kg Optional with filling equipment

Year of construction: 1998, condition: used, Shrink-wrapping machine for shrink-wrapping 6 or 12 bottles Gbodpfjb Im Ttjx Al Uju with manual loading of cardboard trays, or can also be used without trays (only with film).

Condition: used, Year of construction: 2020, Overview This isobaric filling machine was manufactured in 2020 by Rizzolio. The machine is designed for bottle filling and is equipped with a double pre-evacuation system, making it suitable for products such as frizzante. It is currently stored and mounted on wheels for mobile use. No capper is included. The machine can be viewed in person at any time.  Technical data Gedpfxjy Ttzuj Al Usbu - Capacity: approx. 550 bottles/hour (0.33 L, depending on operator) - Formats: 0.33 L / 0.5 L / 0.75 L (general range approx. 0.3 L – 1.0 L) - Application: Bottle filling - Configuration: Filling system with double pre-evacuation, integrated product pump, 3×6 air pipes - Bottle diameter: approx. 55 – 90 mm - Adjustment: Stepless adjustment of bottle diameter and height

Condition: new, Year of construction: 2025, Automatic liquid filling and capping system. Suitable for various liquids and oils from the food industry (water, juices, liqueurs, olive oil, sunflower oil, etc.) as well as from non-food (perfumes, cosmetic oils, detergents, etc.). The liquid filling system has 2 filling heads moving in vertical and horizontal direction, which allow continuous filling and thus a higher number of cycles. Automatic detection of the position of the bottles and of the neck diameter of the lid. The Advantage is less adjustment work and sensor settings (within a certain range) have to be carried out. The change to different bottle dimensions is considerably facilitated, which ultimately results in lower machine downtime due to the time savings. Easy adjustment to different bottle width and height without the need for additional format sets. After filling, the bottles are conveyed by a conveyor belt to the automatic lid capping machine. The positioning and closing of the lids are fully automatic. - Specifications: filling range: 30-3000ml; number of filling heads: 2; max. speed of the machine in neutral: 50 cycles/minute; SUS304, product contact parts from SUS3316; dimensions and weight of the packaging system depending on the final layout. Gedpfx Aev Nk R Hjl Uobu Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Year of construction: 2006, condition: excellent (used), machine/vehicle number: 24591, Throughput: approx. 2 - 5 m³/h Gjdpfx Aedxmd Usl Ujbu Filling and material discharge opening: 300 mm diameter Space requirement (assembled, with bridge): 1400 x 1200 x 2200 mm