Cnc bar lathe buy used

Identified location: Ashburn (US) (Edit)
Enter your address
or
Move
2

CNC Lathes LNS Eco Load L Bar Feed

Dundee, United KingdomUnited Kingdom dealership location
5598 km
2006
ready for operation (used)
Code: ST2895 Bar Capacity:              65mm Bar Length:                 1500mm Nfzkd more
2
Leadwell CNC lathe type Barmaster 40 W/ Fanuc O-mate-T control. chuck diameter Ø 150mm. Max. turning lenght 300 mm. bar capacity Ø40mm specs: • 8-position turret (with several tool holders) Bnytggyc • coolant system • Chipconveyor • Machine light • Tail stock with hydraulic pinole • RS-232 connection more
5

CNC Lathe with bar loader + C axis EMCO E 45

More Emco E 45
Umkirch , GermanyGermany dealership location
6603 km
2007
good condition (used)
The machine is with bar loader, has run only 1,700 hours and is in very good condition. Year of manufacture: 2007 Bcrlkpojkp Control: Fanuc 0 iTC Swing: -Over bed: 430 mm -Over cross slide: 210 mm Turning diameter: 220 mm Distance between centers: 600 mm Turning lenght: 510 mm Bar diameter, max: 45 mm Spindle speed: 0 - 6300 rpm Spindle bore: 53 mm Tool changer: 12 positions -Rotating tools: 6 positions/ 0 - 5000 rpm Tailstock: -Stroke: 120 mm -Diameter: 60 mm... more
9
Schaublin 110 Cnc Lathe + LNS Hydrobar barfeeder Capacities Maximum swing over the carriage : 115 mm Maximum distance between centres : 300 mm Headstock 110-36.00 Number of tool stations : 8 Rotating tools speed : 0-5000 t/min Maximum troughbore : Ø 32 mm Vryshu Spindle drive Spindle power : 5.5 KW Maximum torque : 30 Nm Spindle speed : 30-6000 t/min Carriage Range Z : 300 mm X : 220 mm Control FANUC series O-T machine weight:1400 kg If you need more in... more
7
Okuma CNC lathe offered. Type: LB9 Control unit: OSP 500L-G X-travel: 120 mm Z-travel: 270 mm Turning diameter: 280 mm Spindle bore: 53 mm Speed max: 5000 RPM Toolchanger: 8 pieces Showa central lubrication system Transportbelt Documentation FMB LMS bar loader year of built 1989 Dimensions Okuma: 310x150x162 cm (LxWxH) Hkxcu2bja Dimensions FMB: 635x90x125 cm (LxWxH) For more information call us or send an e-mail. more
10
CNC Lathe with Bar Feeder LNS 4 Axis C Achse OKUMA OSP 7000 L CNC, 20.87 Swing Bcsav2gnwe Sub -Spindle Twin Turret Chip Conveyor 8" 3- Jaw Chuck 6"3-Jaw Chuck 23 Between Spindels Parts Catcher Barfeed Interface LNS Barfeeder more
6

- USED - 4-AXIS CNC LATHE WITH BAR FEEDER TAKAMAZ X20

Matelica (MC), ItalyItaly dealership location
7213 km
1998
ready for operation (used)
MAX TURNING LENGTH: 450 mm MAX TURNING DIAMETER: 260 mm BAR PASSAGE: 51 mm SPINDLE: 3500 rpm; 7,5-11 Kw; ASA 2-6 ; 210 mm COUNTER SPINDLE: 3500 rpm; 2,2-3,7 Kw D8fulph X-AXIS TRAVEL: 165 mm Z-AXIS TRAVEL: 500 mm RAPID FEEDS X-Z: 18 - 24 m/min DRIVEN TURRET HEAD: 12 POS CONTROL UNIT: FANUC 18TB BAR FEEDER: LNS HYDROBAR SPRINT BAR LENGTH: 3000 mm WEIGHT: 4100 Kg OVERALL DIMENSIONS: 4000 x 2000 x 1675 mm ACCESSORIES: PARTS CATCHER; SWARF CONVEYOR; RS 232 SERIAL PORT NOTE: WITH No 2 RADIAL TOOL... more
6
CNC LATHE 2 AXES BRAND: MAZAK Hd9vl8qog TYPE: QT20 YEAR: 1997 CNC: MAZATROL higher EQUIPMENT: A CHIP CONVEYOR CHUCK PROBE TOOLS RECOVERY OF PARTS AGAINST ADVANCED AUTO ADVANCE BAR available unless sold in the meantime machine more
6

CNC Lathe with bar loader EMCO EMCOTURN 425 MC

Umkirch , GermanyGermany dealership location
6603 km
2001
excellent (used)
The machine is still in production and can be inspected under power. EMCO EMCOTURN 425 MC with 2 main and 2 counter spindles and FMB bar loader + C axis Control Siemens SINUMERIK 810 T Turning diameter 170 mm Turning length 190 mm Main power 11 kW, Speed: 0-5000 rpm, 2x12-fold revolver VDI 16, pneumatic clamping cylinder ø26mm on the main spindles, Bcmvpjhplv pneumatic clamping cylinder including part ejector on the counter spindles, Precast catcher, Central lubrication, Coolant ... more


cnc bar la...
daily

New machines via email!

Stay updated!
8
Topper TNL-AT2 2 axis CNC lathe with bar feeder. The machine has run about 5600 Hours (but it is still running some hours each day) Fn2lhvh Inlcuding bar feeder BF-1200, Fanuc series O-TD control, collet chuck, cooling system, chip conveyor, working light. more
1

CNC lathe + bar feeder Saeilo CONTUR LT-400 MC

Bielefeld, GermanyGermany dealership location
6462 km
2011
used
CNC lathe + bar feeder SMA-REF-5882 Type: CNC lathes Manufacturer: Saeilo Model: CONTUR LT-400 MC Year: 2011 Control: Fanuc 0i-TD Spindle: 11/15 kW Working range: Turning diameter: 400 mm Turning length: 500 mm C-axis Features: Driven tools (VDI 40) Bar feeder Multi 3000 LR 1640/80 Condition: ready for action under power Spindle working hours: 4.700 h 2nbbe7xku Location: Eastern Germany Availability: on demand more
6

CNC LATHE WITH BAR FEEDER Hitachi Seiki

More Hitachi Seiki
Weilburg, GermanyGermany dealership location
6521 km
1998
good (used)
3.5 meters bar feeder iemca Turning diameter max. 230 mm Turning diameter without collision 165 mm Turning length 270 mm Bb8jm8cmd7 Bar capacity 45 mm Speeds 30 - 6000 rpm Power 7,5 / 5,5 kW Hot Price more
6
DISTANCE BETWEEN CENTRES: 960 mm MAX TURNING DIAMETER: 210 mm BAR PASSAGE: 65 mm SPINDLE: 50-4800 rpm; 5,5 - 7,5 Kw COUNTER SPINDLE: 50-4800 rpm; 5,5-7,5 Kw X1-AXIS TRAVEL: 167 mm X2-AXIS TRAVEL: 192 mm Y-AXIS TRAVEL: 50/-30 mm Z1-AXIS TRAVEL: 700 mm Z2-AXIS TRAVEL: 730 mm RAPID FEEDS X-Y-Z: 15 - 6 - 20 m/min DRIVEN TURRET HEAD: 12 + 12 POS; 50-6000 rpm; 1,1-2,2 Kw CONTROL UNIT: OSP-U100L BAR FEEDER: LNS mod. SPRINT S2 BAR LENGTH: 3000 mm BAR DIAMETER: 80 mm WEIGHT: 6250 Kg OVERALL DIMENSIONS:... more
3
Description type: TMC 15 year: approx. 1990 control: Fanuc travel turning length 285 mm Turning diameter 285 mm More details machine is equipped with a counter spindle equipped with driven tools tool holder xxx tool changer 12 specialist Spindle power up to 4500 RPM spindle unit Chuck Collet Chuck footprint machine width 2200 mm Length 1650 mm Height 1600 mm Xxxx kg weight 15 kw Btvlhnn more
9

CNC Lathe with bar feeder Quick Tech TT-60

Umkirch , GermanyGermany dealership location
6603 km
2012
excellent (used)
The machine is still in production plant in use, in very good condition and can be inspected under power. Horizontal 5-axis CNC lathe Quick-Tech TT-60 Bar loader Hydrafeed MV65 Control: Mitsubishi M70 Max. Turning diameter: 100 mm Max. Turning length: 150 mm Clps020j Spindle bore: 62 mm Speed: 6,000 rpm. Please note the pic "specification" for more technical details. more
6

- USED - 6-AXIS TWIN-SPINDLE CNC LATHE WITH BAR FEEDER MORI SEIKI DL 150MC

Matelica (MC), ItalyItaly dealership location
7213 km
1997
ready for operation (used)
MAX TURNING LENGTH: 200 mm MAX TURNING DIAMETER: 170 mm BAR PASSAGE: 46 mm SPINDLE: 5000 rpm; 5,5 - 7,5 Kw; ASA 2-5 COUNTER SPINDLE: 5000 rpm; 5,5-7,5 Kw; ASA 2-5 DRIVEN TURRET HEAD: 12 + 12 POS CONTROL UNIT: MSC 518 BAR FEEDER: IEMCA CNC BOSS 542/32 BAR LENGTH: 3200 mm BAR DIAMETER: 45 mm Bciyd3vbxb ACCESSORIES: PARTS CATCHER; SWARF CONVEYOR PRICE: On demand more
4

- USED - 6-AXIS TWIN-SPINDLE CNC LATHE WITH BAR FEEDER MORI SEIKI DL 151MC

Matelica (MC), ItalyItaly dealership location
7213 km
2001
ready for operation (used)
G9un7ueda MAX ROTATING DIAMETER: 420 mm MAX TURNING LENGTH: 200 mm MAX TURNING DIAMETER: 150 mm BAR PASSAGE: 45 mm SPINDLE: 5000 rpm; 7,5 Kw; ASA 2-5 COUNTER SPINDLE: 5000 rpm; 7,5 Kw; ASA 2-5 DRIVEN TURRET HEAD: 12 + 12 POS CONTROL UNIT: MSC 501 BAR FEEDER: IEMCA mod. MASTER 880P BAR LENGTH: 3300 mm BAR DIAMETER: 8-80 mm WEIGHT: 5800 Kg ACCESSORIES: SWARF CONVEYOR; PIECE CONVEYOR; PCMCIA SERIAL PORT PRICE: On demand more
1

CNC LATHE AKIRA SEIKI ASL-35

North Carolina, United StatesUnited States dealership location
518 km
1998
used
Elect./Voltage: Bbu2ysaf9z AKIRA SEIKI ASL-35 CNC Lathe -- Chuck diameter 10". -- Bar capacity 2.95". -- Swing over bed 25". -- Distance between centers NA. -- Max Machining Diameter 17". -- X- Axis travel 8" . -- Z-Axis travel 23.2". -- Max. spindle speed 4,000 RPM. -- Main motor 25 HP. -- Number of tool positions 12. -- Dimensions approx 115" x 75" x 75". -- Weight approx 13,100 [...] with: -- GE Fanuc 0-T control -- 10" 3-Jaw hydraulic chuck -- Tailstock -- Chip conveyor more
1
Bczllxtwvt Turning length 1500mm Turning diameter 600mm Spindle speeds 35-3000 rpm Input 40 hp Fitted with 40 Automatic Tool Change more
6

CNC Lathe WEILER DZ 26-V4

Wilbertoord, NetherlandsNetherlands dealership location
6307 km
1995
used
turning diameter 135 mm turning length 160 mm control Siemens weight of the machine ca. 1.6 t Cxnzxov dimensions of the machine ca. m more
3

CNC Lathe TRAUB TND 360

More Traub Tnd 360
Mönchengladbach, GermanyGermany dealership location
6371 km
1988
used
turning diameter:*360 mm turning length:800 mm control:TX 8 turning diameter over bed slide:160 spindle bore:90 mm spindle turning speed range:1 - 3150 U/min feed - longitudinal/cross:0 - 10000 mm/min 8yxm9ai tailstock quill taper MT:4 tailstock quill stroke:110 mm total power requirement:38 kW weight of the machine ca.:3,5 t dimensions of the machine ca.:3,4 x 1,9 x 1,8 m - CNC control Traub TX 8 - 10-fold revolving head - tool preseting device - coolant device, chip conveyor more
6

CNC Lathe DOOSAN PUMA MX 2100LST-GL

Mülheim an der Ruhr, GermanyGermany dealership location
6390 km
2008
used
chucking diameter 210 mm Swinging diameter over bed 750 mm Swing diameter over bed cross slide 650 mm bar material dia. 65 mm turning length 1020 mm Main spindle (left) speed max. 5000 U/min Main spindle (left) Spindle passage 68 mm Bcy8toi2cz Main spindle (left) Drive power 22 kW Main spindle (left) Torque 318 Nm control Fanuc 31i - Model A spindle hours 25.388 h + Portal loading unit more
4

CNC Turning Lathe SMEC SL2500BM

Santiago de Querétaro, Querétaro, MexikoMexico
2994 km
2015
as good as new (ex-display)
Fair machine SMEC SL2500BM CNC lathe with powered tools by WTO Swing diameter / swing diameter: 650 mm Maximum turning diameter and turning length: 405 x 520 mm Bar passage: 77 mm Chuck size: 254 mm (10 ") Spindle speed: 3,500 rpm Spindle nose: A2-8 Spindle motor: 18.5/15 kW Torque spindle: 534 NM Rapid traverse x/Z: 24/30 m / min Traverse paths x/Z: 245/540 mm Tool places: 12 PCs BMT65 Quill stroke: 100 mm Machine weight: 5,200 kg Footprint without chip conveyor: 3.125 x 1... more
1
Elect./Voltage: 400/3/60 Bcsqj72ocs WEILER E50 x 2000 CNC Lathe -- Swing over bed 22 in -- Swing over carriage 13.5 in -- Chuck diameter: 12 in -- Max distance between centers: 80 in -- Travel X: 13.5 in -- Travel Z: 80 in -- Spindle bore: 3.25 in -- Spindle speeds: 1-625 / 4-2500 RPM -- Max torque on main spindle: 1500 Nm -- Max size of tools: 1.25 in; 2 in bar -- Tailstock stroke: 8 in -- Tailstock spindle diameter: 3.125 in -- Tailstock taper: MT#5 -- Motor 30 min/cont: 22/2... more
3

CNC Lathe OKUMA Howa Act 2 SP 3

Wilbertoord, NetherlandsNetherlands dealership location
6307 km
1995
used
turning diameter 300 mm turning length 250 mm control OSP 5000 weight of the machine ca. 7 t Bazo0ddmzh more
3

CNC Lathe BRINKMANN DCF 175

Bühl, GermanyGermany dealership location
6593 km
1992
used
turning diameter 220 mm turning length 250 mm control SIEMENS SINUMERIK 820 T swing diameter 380 mm chucking diameter 250 mm x-travel 200 mm z-travel 250 mm spindle turning speed range bis 4000 U/min rapid travel - longitudinal/face 15 m/min Ey8p8kj total power requirement 27,5 kW weight of the machine ca. 4,5 t dimensions of the machine ca. 3,2 x 2,9 x 2,2 m acc.: hydr. 3-jaw chuck, various tool holders for turret, chip conveyor, coolant more
6

CNC Lathe INDEX GE 65

More Index Ge 65
Mülheim an der Ruhr, GermanyGermany dealership location
6390 km
used
turning diameter nominal ca. 175 mm Hp033fsgw control Siemens 810 D Total weight, approx. 3600 kg height 1800 mm turning speed range 45 - 4000 U/min work spindle diameter 110 mm spindle bore 80 mm hollow clamping cylinder Hub 35 travel of compound slide-rest Z - 400 mm travel of compound slide-rest X - 150 mm dia. of quill 55 mm quill stroke max. 60 mm tool holder 14 - complete retrofit in 2001 more
6

CNC Turning lathe SMEC PL25LM

Santiago de Querétaro, Querétaro, MexikoMexico
2994 km
2015
as good as new (ex-display)
Fair machine SMEC PL25LM CNC lathe with powered tools by WTO Swing diameter / swing diameter: 650 mm Maximum turning diameter and turning length: 356 x 1,020 mm Bar passage: 77 mm Chuck size: 250 mm Spindle speed: 3,500 rpm Spindle nose: A2-8 Spindle motor: 22/18.5 kW Torque spindle: 625 NM Rapid traverse x/Z: 18/24 M / min Traverse paths x/Z: 225/1,040 mm Tool places: 12 PCs BMT65 Quill stroke: 100 mm Machine weight: 6.600 kg Ndbqn Footprint without chip conveyor: 3.904 x... more
1
Elect./Voltage: 480 V, 60 Cy, 3 Ph. Itf8fct WARNER SWASEY CNC BIG BORE LATHE. -- Specifications: Z-axis travel 72", X-axis travel 22", swing over bed 32", spindle bore dia. 13.125", speed range 9 - 133 RPM & 26 - 400 RPM, max. length 72", swing over saddle 32", max turn dia. 32". -- Equipped with: 36" 3-jaw chuck, (6) tool post tools, 75 HP motor, TECHNICS MENTOR 2-spindle drive. -- Unit had a $100K CNC retrofit in 2009 with FAGOR 8055 control. more
6
faceplate diameter 1400 mm swing diameter 1450 mm turning height 1630 mm max. workpiece weight 6300 kg reus 10 - 315 U/min cross rail adjustment - vertical 1250 mm Bbmisiyeam max. ram stroke 1100 mm Control Siemens 840 D total power requirement 0 kW weight of the machine ca. 0 t dimensions of the machine ca. 4,35 x 2,85 x 5,1 m * general reconditioned and modernized in 2001 * CNC - control by SIEMENS SINUMERIK 840 D * chip conveyor machine wasnt in use in production since 2008 more
6

CNC Lathe INDEX GE 42NC

More Index Ge 42
Wilbertoord, NetherlandsNetherlands dealership location
6307 km
used
turning diameter 370 mm Bcavndofw8 turning length 400 mm control Philips weight of the machine ca. 3 t more
2
workpiece dia. Ø 24 mm workpiece feed -automatic 75 mm thread dia. 30 mm turning speed range - spindle 27 - 3750 U/min tool turret 8 Plätze max. travel of the tool turret 70 mm total power requirement 5,5 kW weight of the machine ca. 1,9 t dimensions of the machine ca. 2,10 x 0,85 x 1,50 m with 2 cross and 2 parting-off slides, Srnyhk with thread chaser device and multi edge turning device acc.: bar loading magazine IEMCA AS 325/32, various change gears more
4

CNC Vertical Turning Lathe Hitachi Seiki CS-20

Zevenbergen, NetherlandsNetherlands dealership location
6233 km
1998
good (used)
Maximum turning diameter 350 mm. Ekdo2isdi Maximum swing 350 mm. Maximum spindle bore for bar work 59 mm. Spindle speed 30-5000 Rpm. Maximum turning length 150 mm. Number of tools on turret 12. Tool type VDI 40. CNC control Seiki Seikos Ʃ10L more
5

CNC Lathe Doosan S 550LM

Heilbronn, GermanyGermany
6642 km
2004
good (used)
Fanuc 21 iTB CNC control 3-jaw chuck diameter 380mm driven tools C-axis 12 fold turret head Bczkqkhrcx tailstock chip conveyor high pressure pump up to 80bar coolant device Technische Daten / technical details: max. Umlauf- über Bett / max. swing  over bed 710 mm max. Drehdurchmesser / max. turning diameter 480 mm max. Drehlänge / max. turning length 1130 mm Planweg (x) / cross way (x) 300 mm Längsweg (z) / longitudinal way (z) 1150 mm Spindelbohrung / spindle hole 102 mm Dr... more
1
Elect./Voltage: 280/3/60 Bbu0ggjpgq WEILER E90 CNC Teach & Learn Engine Lathe -- Center distance 118”. -- Height of centers 17.7”. -- Swing over bed 35.3”. -- Swing over cross slide 20.8”. -- Width of bed 23.6”. -- Travel of cross slide 23.2”. -- Travel of top slide 9.8”. -- Length of cross slide 48.4”. -- Width of cross slide 13.6”. -- Spindle hole 10.5”. -- Main motor 43HP continuous /53HP 30 minute rating. --... more
5

CNC Lathe INDEX GFG250

More Index Gfg 250
Göppingen, GermanyGermany dealership location
6699 km
1987
used
turning diameter 250 mm turning length 500 mm control Siemens Sinumeric System total power requirement kW weight of the machine ca. t dimensions of the machine ca. m Y33ue3zb7 more
6

CNC Lathe Ouick Tech AT25 Smart

Wilbertoord, NetherlandsNetherlands dealership location
6307 km
2002
used
turning diameter 60 mm turning length 100/225 mm control Quick Tech Control-Mitsub x-axis 200 mm Bcoq0jlycz y-axis 335 mm z-axis 255 mm weight of the machine ca. 2,5 t dimensions of the machine ca. 2650x1450x1700 m more
3

CNC Lathe WEISSER-HEILBRONN JUNIORMAT

Bühl, GermanyGermany dealership location
6593 km
1990
used
turning diameter 475 mm turning length 1000 mm control SIEMENS SINUMERIK 810 T turning dia. over face-slide 260 mm centre height 235 mm spindle bore 63 mm turning speed range 10 - 2250 U/min feeds 0,001 - 50 mm/U rapid traverse X-axis 5 m/min rapid traverse Z-axis 8 m/min bed width 335 mm tailstock quill diameter 80 mm tailstock quill stroke 150 mm Baxkio8k workpiece weight max. 750 kg face slide travel 300 mm tailstock taper MT 5 weight of the machine ca. 3,0 t dimensions of the machine ca. ... more
3

2 Axis Teach Inn/ Cyclecontr CNC Lathe Gildemeister Nef Plus 710

Zevenbergen, NetherlandsNetherlands dealership location
6233 km
1997
good (used)
Maximum swing over bed 710 mm. M8ugr Spindle speed 3 steps. 16-180 Rpm /56-610 Rpm / 160-1800 Rpm. Centerheight 345 mm. Maximum turning length 2000 mm. CNC Control Grundig Manual Plus more
1
Elect./Voltage: Bbwgkhmpcs AMERICAN 20" X 78" HUSTLER CNC Lathe; -- Swing over carriage wings 20". -- Swing over cross slide 10". -- Distance between centers 78". -- Spindle hole clearance 3". -- Cross slide travel 15.5". -- Spindle speeds, range 30 To 3,000 RPM. -- Feed range 0.1 To 200 IPM. -- Traverse rate 200 IPM. -- Main drive motor 20 HP. -- Carriage feed motor 1.5 HP. -- Crossfeed motor 1.1 HP. -- Tailstock spindle diameter 4". -- Tailstock spindle movement 10". -- Tails... more
8

CNC Lathe Mori Seiki CL25

Noord Brabant, NetherlandsNetherlands
6290 km
1998
good (used)
MORI SEIKI CL25A Bcps7lmmzg 1998 / 7 Max turning DIA over bed: 520 mm, max. z-axis: 500 mm, max. x-axis: 260 mm, spindle taper: a2-8, forward: 75 mm, capacity: 15/11 kW, control: msc - 521, 3 x 400 V, 30.5 kVA, L: 2000 mm, B: 1736 mm, H: 1955 mm, weight: 4,1 ton,. more
6

CNC Lathe OKUMA LB9

More Okuma Lb 9
Wilbertoord, NetherlandsNetherlands dealership location
6307 km
1989
used
turning diameter 42 mm turning length ? mm control Okuma OSP 500 L-G weight of the machine ca. 5 t Nezc2 more
1

CNC Lathe VDF-BOEHRINGER DN 570

Bühl, GermanyGermany dealership location
6593 km
1980
used
turning diameter 570 mm turning length 1000 mm centre height 285 mm swing diameter over face slide 280 mm greates pass round over bed 570 mm spindle bore 82 mm quill adjustment 180 mm Lv8k2 Main spindel power 16 kw main spindle speeds: 112 - 2240 U/min. rapid travel - longitudinal/face 6 m/min spindle drive 32 kW total power requirement 57,5 kVA weight of the machine ca. 3,5 t dimensions of the machine ca. 3,00 x 2,25 x 1,90 m acc.: 3-jaw chuck FORKARDT, 4-jaw chuck, MULTIFIX toolpost in fro... more
6

CNCLathe with driven tools Mazak Super Quick Turn 200M x 1000

Campagneweg 10, NL-4761RM Zevenbergen, NLNetherlands
6233 km
2002
excellent (used)
Maximum swing: 525 mm Bb9h9lgsgq Maximum turning diameter: 300 mm Maximum spindle bore for bar work: 51 mm Maximum turning length: 1048 mm Spindle speed: 35 - 5000 RPM Spindle motor: 18,5/15 KW (30 min./continue) Maximum torque on spindle: 350 nm Spindle speed driven tools: 25 - 4500 RPM Motor driven tools: 3,7 KW ((30 min./continue) Torque motor driven tools: 35 nm Number of tools on turret: 12x Number of driven tools: 12x Tool type: Mazak VDI CNC Control: Mazatrol PC Fus... more
6

Bar Automatic Lathe - Multi Spindle TRAUB TB 42

More Traub Tb 42
Mülheim an der Ruhr, GermanyGermany dealership location
6390 km
1970
used
number of spindles - spindle passage - mm turning length - mm Hp0w7obwc Accessories: Cross drilling unit, revolver quick drilling unit, curve etching more
1
Elect./Voltage: 440 V, 60 Cy, 3 Ph. Gutjzvb WEILER E 50 X 2000 CNC Lathe -- Turning length / Center distance 78.74″ -- Swing over bed 22.44″ -- Swing over cross slide 13.39″ -- Travel of cross slide 13.39″ -- Width of bed 13.78″ -- Spindle bore: 6.5″ -- Chuck 3-Jaw 20" -- Max. torque at the main spindle 900 Nm -- Metric threads 0.001″ – 78″ -- Inch threads 112-1/64 TPI -- Modular threads 0.001 – 2.20″ -- Diametral t... more
1

CNC-Vertical Turret Lathe - Single Col. TITAN SC 17

Stockstadt, GermanyGermany dealership location
6564 km
1994
used
faceplate diameter:1450 mm swing diameter:1700 mm turning height:1000 mm max. turning diameter:1670 mm ram stroke:700 mm number of spindle speeds:180 U/min. dimensions:5 x 5 x 3,5 m Motor power:55 kw weight of the machine ca.:17 t Yii23ndie DRO: tool holder:Pentagonal Use, in 2007 retrofitted Vertical Turret Lathe with CNC Fagor 8055-T more


cnc bar la...
daily

New machines via email!

Stay updated!

to

to

Edit search
CNC BAR LATHE
SELL IMMEDIATELY
with Europe's market leader for as little as € 0,49 per ad.
Find out more


Phone: +1 312 94 04 581
or sell immediately
Try our Machineseeker app now!
Machineseeker app for iPhone and Android.
Want to really stop the chat history?
Yes No
×
Machineseeker chat
Name E-mail Your message to the Dealer
START CHAT WITH DEALER
  You are chatting with: 
  Your contact person: 
  
Your contact is typing
SEND MESSAGE
  You are chatting with: 
  Your contact person: 
  
Your contact seems to be inactive
Chat window close