Used Okuma for sale (226)

Condition: used, Rated voltage: 400V, phases: 3, frequency: 50Hz, max. power consumption: 57.9kVA, total current consumption: approx. 83.8A, max. motor current consumption: 94A, current interruption at: 10kA, connected load: 47.8kVA, control: Okuma OSP-U100L, an on-site inspection is possible. Gsdpfoz E Nq Rjx Al Uokc

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, We offer this used Okuma LB300 CNC lathe, manufactured in 2001. Manufacturer: Okuma Model: LB300 Year of manufacture: 2001 The condition is very good and meets the manufacturer's specifications. The machine is operational in our CNC turning shop and can be inspected at any time. All machines are under the manufacturer's service agreement. Last service in 2026. The following accessories will be included in the sale: Chip conveyor Gjdpfxjz Rv Rvs Al Uskc Extraction system Tool holder (available at an additional cost, negotiable) The machine is available for immediate delivery after consultation. If you have any questions or require further information, please send us a message or call us.

Condition: used, Year of construction: 2006, We are offering this used Okuma LU300-M CNC turning machine, manufactured in 2006. Gkodpfx Ajz Rwfuol Uoc Manufacturer: Okuma Model: LU300-M Year of manufacture: 2006 Date of production: 11/2006 Serial number: 126842 Condition: used Machine category ID: 1182 Machine type ID: 190 Machine type: CNC turning machine If you have any questions or require further information, please feel free to send us a message or call us.

Condition: used, OKUMA BLUSHLESS SERVOMOTOR DRIVE UNIT BL-120E-20 Gkedoy Suw Ujpfx Al Uec

Condition: like new (used), Year of construction: 2015, operating hours: 500 h, functionality: fully functional, * Okuma Millac 852V II / 50. * Machine in excellent condition with very few cutting hours. * High metal removal rate machine. * Box guideways on all axes. * Quadruple box guideway system on the Y-axis. * Extremely rigid structure. * Oil-fed guideway lubrication system with automatic machine stop. * Renishaw tool probe. * BT 50 spindle taper. * High-torque 18.5 kW motor. * Cutting torque: 580 Nm. * Chip evacuation capacity: 540 cm³/min. * Okuma IGF OSP300 automatic conversational programming system. * Automatic force control and tool usage monitoring. * Parametric automatic tool anti-collision system. * Communication ports: USB, PCMCIA card, and RS-232. * Tool life management and usage tracking. * Automatic control of torque and tool stress. * Table dimensions: 2,200 x 850 mm. Gjdpfx Alsz Nc Rls Ujkc * Maximum load capacity: 2,500 kg. * Spindle speed: 6,000 rpm. * X-axis travel: 2,050 mm. * Y-axis travel: 850 mm. * Z-axis travel: 750 mm. * Spindle oil cooler. * Rapid traverse speed: 20,000 mm/min. * 36-tool magazine. * Tool change time: 0.5 seconds. * Chip-to-chip time: 5 seconds. * Independent Knoll coolant system (70 bar pressure). * 30-micron particulate filter system. * LTA mist filtration system. * Rear-mounted hinge-type chip conveyors. * Machine currently in production. * Inspectable by a qualified official Okuma technician. * Condition: Like new. * Extensive BT 50 tooling/holder package. * Includes electrical transformer, documentation, parts list, electrical schematics, and programming/operation manuals. * Machine weight: 20,500 kg. * Immediate delivery available (subject to prior sale).

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, CNC turning center Okuma LU 45 M -3000 Control: OSP-P200L Year of manufacture: 2009 Godpfxjz Rl H He Al Uekc Internal machine number: 81 Max. turning diameter: 660 mm Max. turning length: 3,000 mm Spindle bore: Ø 260 mm Spindle speed: 2,800 rpm Travel distances: X-axis: 420 mm Z-axis: 3,025 mm Spindle power: 30 kW Accessories - Chip conveyor - Tool turret with 12 stations - Tools

Condition: like new (used), Year of construction: 2022, operating hours: 930 h, functionality: fully functional, travel distance X-axis: 660 mm, travel distance Y-axis: 460 mm, travel distance Z-axis: 360 mm, controller manufacturer: Okuma, controller model: OSP P300MA + 3D kit, workpiece weight (max.): 350 kg, table width: 760 mm, table length: 460 mm, overall weight: 7,000 kg, spindle speed (max.): 20,000 rpm, operating hours of spindle: 930 h, spindle motor power: 15,000 W, spindle nose: HSKA63, number of slots in tool magazine: 20, type of input current: three-phase, Equipment: documentation/manual, rotational speed infinitely variable, High precision Die/Mold vertical CNC, actively cooled frame & spindle. 0.1um control, 4 digits after the decimal point. Full options, including Renishaw, air on the spindle, laser measurement etc. See attached PDF for a detailed list including software options and accessoires. Cleaned and ready for installation. All checks allowed (at buyers expense, machine stored in warehouse), we can ask Okuma to make a test report if required. New price was 300.000 euro's, so half price for an as-new machine with only 930 hours! Gsdpfx Aowzzrkol Ujkc

Condition: used, Year of construction: 2023, functionality: fully functional, turning diameter over cross slide: 410 mm, turning length: 500 mm, turning diameter: 410 mm, spindle bore: 80 mm, spindle speed (max.): 5,000 rpm, travel distance X-axis: 260 mm, travel distance Y-axis: 90 mm, travel distance Z-axis: 510 mm, spindle motor power: 22,000 W, rapid traverse X-axis: 25 m/min, rapid traverse Y-axis: 12 m/min, rapid traverse Z-axis: 30 m/min, rotational speed (max.): 5,000 rpm, total height: 2,145 mm, total length: 3,272 mm, total width: 2,619 mm, quill stroke: 150 mm, overall weight: 6,800 kg, swing diameter over bed slide: 580 mm, Equipment: documentation/manual, We offer this used Okuma LB3000 EX II MY CNC lathe with ARMROID Automation. Year: 2023. Control: OSP-P300LA Excellent Clean Condition, fully operational and under power. Configuration: Single spindle CNC Turning Center with Armroid Robotic Arm. Main Spindle Seed: Up to 5,000 rpm Spindle Bore / Bar Capacity: 80mm Max Turning Diameter: 410mm Max Turning Length: 500mm Swing Over Bed: 580mm Turret: 12-station live tol turret Spindle Motor Power: 15 kW (20 HP) - (continuous) Y Axis Travel: 120mm (+70 * -50mm) Thermal Stabilization system (TAS for spindle and structure) to mitigate thermal expansion. Tail Stock Integrated Okuma robotic arm system for lights-out operation. Chip conveyor Regularly maintained and in excellent condition - last service September 2025 Byer is responsible for removal and delivery Machine can be used with or without robot loader as required making it very versatile Gksdpfozi Ihfjx Al Uec

Condition: good (used), Year of construction: 2001, functionality: fully functional, turning length: 1,250 mm, turning diameter: 620 mm, spindle bore: 120 mm, spindle speed (max.): 3,500 rpm, travel distance X-axis: 300 mm, travel distance Z-axis: 1,275 mm, spindle motor power: 22 W, total height: 1,925 mm, total length: 3,980 mm, total width: 1,880 mm, overall weight: 7,600 kg, bar passage: 80 mm, spindle nose: JIS-A2-8, Equipment: documentation/manual, OKUMA SPACE TURN LB400-M – CNC TURNING CENTER OKUMA SPACE TURN LB400-M – a robust and powerful Japanese CNC turning and milling center designed for precision machining and series production of metal components. The machine is built on the proven OKUMA platform and offers high rigidity, reliability, and excellent performance for demanding CNC turning applications. The LB400-M version is equipped with driven tools and a C-axis, making it suitable for complex machining operations and allowing multiple machining processes to be completed on a single machine. MACHINE DATA Manufacturer: OKUMA Model: SPACE TURN LB400-M Type: CNC Turning & Milling Center Machine type: CNC Lathe / CNC Turning Center CNC Control: OKUMA OSP Number of axes: 2 + C-axis Turret: 12-position turret Driven tools: Yes C-axis: Yes Hydraulic chuck: Yes Coolant system: Yes Chip conveyor: [YES / NO] Tailstock: [YES / NO] Condition: Used / Good working condition MAIN FEATURES Robust Japanese OKUMA construction CNC turning and milling capability Gkjdpfx Aezwdw Eel Uec C-axis for complex machining operations Driven tooling 12-position automatic turret Hydraulic chuck High rigidity and stability Suitable for both single-part and series production Excellent machine platform for heavy-duty turning applications Machine available for inspection and testing The machine has a 3-year-old refurbished main spindle and X-axis.

Condition: excellent (used), Year of construction: 2007, Control system OSP P 200L Swing over bed 530 mm Swing over cross slide 420 mm Max. turning diameter 340 mm Turning length 1000 mm Travel X 260 mm Z 1020 mm C 0.001° Spindle speed (2 ranges) 38 – 3,800 rpm Spindle power 22/15 kW Spindle bore 80 mm Bar capacity 70 mm Number of tools in turret/driven 12/12 VDI 40 Driven tool speed 4,500 rpm Driven tool power 5.5/3.3 kW Chuck diameter 315 mm Machine dimensions 3310 x 1895 x 1925 mm 6.000kg Gkjdpsz Hwmcjfx Al Usc 3 pcs driven tool holders, 5 pcs fixed tool holders. Chip conveyor, Tailstock with hydraulic locking, Tool measuring equipment,

Condition: used, Year of construction: 2011, x-travel 762 mm y-travel 460 mm z-travel 460 mm table surface area 1.000 x 460 mm control Okuma OSP 20 M rapid traverse 40/40/32 m/min table load 0,7 t turning speed range 12000 U/min power capacity - milling spindle 22/18,5 kW max. torque on the spindle 198 Nm no. of tools in the magazine 32 Stück internal coolant system feed 20/43 bar tool taper BT 40 weight of the machine ca. 6,8 t dimensions 2.22 x 2,9 x 2,75 m CNC- vertical machining centre with internal coolant First installation 2014 - coolant through the spindel 15 bar, 20 ltr/min - air throug the spindle - chip conveyor - signal lamp - Dual tool change arm - external electric hand weel - tool lenght measuring and toolbreak detection - filter system - X- axis in gantry style - spindle oil cooler - thermal compensation spindel and bed - USB and Ethernet port - Hi-Cut Pro high speed control Gkjdpfsz Nn Azjx Al Ujc - 100 Zero offsets - thread milling

Condition: excellent (used), Year of construction: 2012, Description Specification Manufacturer TATUNG-OKUMA Model GENOS L300E-M Manufacturing Date 30 January 2012 Serial Number PEA258 CNC Control OKUMA OSP P200LA-R MCS3 Machine Type CNC Turning Centre with Driven Tools CE Declaration of Conformity Available Tool Turret 12 Stations Tailstock Included Parts Catcher Listed in machine documentation Bar Feeder Interface Listed in machine documentation 2. Machining Capacity Description Specification Maximum Turning Diameter Ø300 mm Maximum Turning Length 1,060 mm Maximum Swing Over Bed Ø520 mm X-Axis Travel 235 mm Z-Axis Travel 1,144 mm Gedpjz Nyvtofx Al Uekc Main Spindle Speed 30–3,000 rpm Spindle Nose A2-8 Main Spindle Motor Power 11 / 7.5 kW (30 min / continuous) 3. Turret and Driven Tools Description Specification Tool Turret 12 Stations Turret Type M-V12 Driven Tool Capability Yes Driven Tool Speed 45–4,500 rpm Driven Tool Motor Power 7 / 3.3 kW C-Axis 360° C-Axis Indexing Resolution 0.001° 4. Equipment and Features - OKUMA OSP P200LA-R CNC control system - 12-station tool turret - Driven tooling capability for milling and drilling operations - C-axis positioning - Tailstock - Parts catcher (indicated in documentation)

Condition: good (used), Year of construction: 2014, functionality: fully functional, CNC-controlled lathe with powered tools, chip conveyor, automatic tool measuring system, chip evacuation conveyor, and bar feeder. Put into operation 11/2014 Control system OSP-P300L CNC with a 15" color touchscreen Machine hours: Power-on time: 65,458 hours as of 03/18/2026, NC operating time: 36,054 hours Spindle rotation time: 19,533 hours Cutting time: 16,582 hours And increasing. Power consumption 33.1 kVA Technical data Max. swing diameter 480 mm (approx. based on the current chip conveyor design) Max. machining diameter 340 mm Max. turning length 785 mm Collet chuck + 10" hydraulic chuck B210-A06-01, 3x soft jaws (Schunk KM-WBL 103) 1x hard jaws (Schunk SHB-J 100) Hydraulic through-bore cylinder SS 1770, draw tube Main spindle Spindle with JIS A2-6 interface, 80 mm bore, integrated motor Speed range 45 - 5,000 rpm Power/continuous operation 22 kW/15 kW Continuously controlled C-axis, 3600 with 0.001° increment Sub-spindle Speed range 50 – 6,000 rpm Power/continuous operation 11 kW/7.5 kW Spindle with 140 mm interface, 62 mm bore, integrated motor Continuously controlled C-axis, 360° with 0.001° increment Collet chuck + 6" hydraulic chuck B206-01, 3 x set of soft jaws (Schunk KM-WBL 62) Hydraulic through-bore cylinder SS1243, draw tube Sub-spindle travel - NC axis W travel for W450: 595 mm Spring-loaded part ejector from the sub-spindle Overload protection for W-axis (drive torque) Tailstock mounting in the sub-spindle Turret Number of tool positions 12, both fixed and powered BMT60 (not VDI) Tool mounting in. 25 x 25 mm Tool mounting out. diameter 40 mm Powered tools Drive power 7.1/4.1 kW Speed range 45 – 6,000 rpm Feed speeds Rapid traverse in X and Z axes 25/30 m/min Rapid traverse in C axis 200 rpm Travels X-axis 260 mm Z-axis 510 mm Y-axis 115 mm (+70 mm / -45 mm) Machine data Width 3330 mm – without bar feeder and chip conveyor Depth 1800 mm Height 2250 mm Machine weight 5,250 kg Accessories: OSP-P300L Advanced One Touch CF-M-E package including: Coordinate transformation function Profile generation function Advanced One Touch IGF 3D machining process simulation Cutting time overrun check Load monitoring (spindle, feed axes) NC operation monitoring (including part counting) Function for reducing cycle time Hi-Cut Pro function Spindle speed control function High-pressure coolant, max. 20 bar, max. 50 l/min Bar feeder ILS type MUK 7012, with bar magazine 6-70 mm/1250 mm, year of manufacture 05/2014, manufacturer Kurt Breuning – IRCO Maschinenbau GmbH, Steinenbronn. Gjdpsz Hk R Uofx Al Uokc FILTERMIST FX4002 extraction unit Equipment for the machine: Collet chuck: SMW AUTOBLOK: KSZ-DZN-065-A06 201342 (currently on the main spindle) Collets diameter (mm): 6-7-8-9-10-11-12-13-14-15-16-17-18-19-20-21-22-23-24-25-26-27-28 -29-30 31-32-34-35-36-38-39-40-41-42-44-45-46-48-50-51-53-55-57-60-64-6 5 Grooved collets diameter (mm) 55-60-65 Collet chuck: SMW AUTOBLOK: KSZ-DZN-042 Z140 205073 (currently on the sub-spindle) Collets diameter (mm): 6-7-8-9-10-11-12-13-14-15-16-17-18-19-20-21-22-23-24-25-26-27-28 -30 31-32-34-35-36-39-38-40-41 Tool holders: Axial holder - 5X Tool holder, turning - 5x Tool holder, boring bar - 2x Front-end drive, double-sided - 3x Front-end drive, side - 3x Reduction sleeve (manufactured from stock material) Reduction - nylon diameter (mm): 12-14-15.5-17-20-22-24-26-28-30-31-34-36-38-40-42-44-47-50-52 The machine is regularly serviced.

Condition: ready for operation (used), Year of construction: 2014, spindle speed (max.): 5,000 rpm, travel distance X-axis: 260 mm, travel distance Z-axis: 1,065 mm, spindle motor power: 22,000 W, overall weight: 6,500 kg, number of axes: 3, Horizontal turning machine manufactured in 2014. This Okuma LB3000EXII features a maximum turning diameter of 340 mm and a turning length of 1,000 mm. It has a swing over bed of 580 mm and a maximum workpiece weight of 250 kg. If you are looking to get high-quality turning capabilities, consider the Okuma LB3000EXII machine we have for sale. Contact us for further details. Capacities • Swing over bed: 580 mm • Swing over longitudinal carriage: 470 mm • Distance between spindle centers: 1,020 mm • Max turning diameter: 340 mm • Max turning length: 1,000 mm • Max workpiece weight between centers: 250 kgMain spindle • Spindle diameter: 120 mm • Spindle nose: JIS A2-6 (optional JIS A2-8) • Spindle bore: 80 mmAxes • Z rapid: 30,000 mm/min • X rapid: 25,000 mm/min • Feed range X/Z: 0.001–1,000 mm/revTurret • Type: V12 • Tool stations: 12 • Suitable for turning or driven tools (L- or M-tools) Gkjdpfez Ni D Tjx Al Usc • External tool size: 25 × 25 mm • Internal tool size: Ø40 mmDriven tools / C-axis • Driven-tool speed: 45–6,000 rpm • C-axis range: 360° • C-axis indexing increment: 0.001° • C-axis rapid speed: 200 rpmTailstock • Taper: MT No. 5 • Travel: 1,015 mm • Motor: 2.9 kWElectrical / auxiliary • Hydraulic unit pump: 2.2 kW • Lubrication pump: 0.018 kW • Coolant pump: 0.25 kW (side chip discharge) / 0.8 kW (rear chip discharge) • Supply voltage (manual): 200 V • Transformer voltages: 220 / 240 / 380 / 415 / 440 / 480 V • Frequency: 50/60 Hz • Electrical cabinet protection: IEC IP54 Technical Specification Counter Spindle No Driven Tools Yes

Condition: good (used), Year of construction: 2002, Control system OSP U 100L, Swing over bed 530 mm, Swing over cross slide 420 mm Max. turning diameter 340 mm Turning length 1000 mm Travel X 260 mm Z 1020 mm C 0.001° Spindle speed (2 ranges) 38 – 3,800 rpm Spindle power 22/15 kW Spindle bore 80 mm Gksdpoz Hwf Eefx Al Ujc Bar capacity 70 mm Number of tools in turret/driven 12/12, VDI 40 Driven tool speed 4,500 rpm, 5.5/3.3 kW, Chuck diameter 315 mm Machine dimensions 3310 x 1895 x 1925 mm, 6.000kg 3 pcs driven tool holders, 5 pcs fixed tool holders. Chip conveyor, Tailstock with hydraulic locking, Tool measuring equipment,

Condition: used, Year of construction: 2003, functionality: fully functional, For sale: OKUMA MB-500H CNC Horizontal Machining Center Year of manufacture: 2003 Reliable and robust Japanese horizontal machining center equipped with an automatic 2-pallet changer, through-spindle coolant, and chip conveyor. The machine is in working condition and can be inspected under power at our facility in Croatia. TECHNICAL DATA Manufacturer: OKUMA Model: MB-500H Year: 2003 Machine type: CNC Horizontal Machining Center CNC control: OKUMA OSP WORKING AREA X-axis travel: 800 mm Y-axis travel: 800 mm Z-axis travel: 800 mm Distance from pallet surface to spindle center: 70 – 870 mm Distance from pallet center to spindle nose: 150 – 950 mm PALLET / TABLE Number of pallets: 2 Pallet size: 500 × 500 mm Maximum pallet load: 500 kg Pallet changer: Automatic rotary pallet changer (APC) Table indexing: 1° Pallet surface: 24 × M16 tapped holes The automatic 2-pallet system allows the next workpiece to be set up while the machine is running, significantly reducing non-productive setup time. SPINDLE Spindle speed: 50 – 15,000 rpm Spindle taper: SK40 / MAS 403 SK40 Spindle motor power: 26 kW / 18.5 kW continuous Spindle bearing diameter: Ø70 mm Through-spindle coolant (TSC) AUTOMATIC TOOL CHANGER Magazine capacity: 40 tools Tool holder: MAS SK40 Tool selection: Memory random Maximum tool diameter: Ø75 mm Maximum tool diameter without adjacent tools: Ø145 mm Maximum tool length: 350 mm Maximum tool weight: 8 kg FEED RATES Rapid traverse: up to 90 m/min Cutting feed rate: 1 – 60,000 mm/min EQUIPMENT Automatic 2-pallet changer (APC) 2 × 500 × 500 mm pallets Through-spindle coolant (TSC) Chip conveyor Automatic tool changer 40-tool magazine BT40 spindle Full machine enclosure Coolant system CONDITION The machine has been used in our own production and has been regularly maintained. Machine is fully operational and can be inspected under power. Location: Croatia Inspection and test run are possible by appointment. Additional photos, videos, and information are available on request. Loading/transport can be discussed separately. Gkodpfxjzxq Its Al Usc Price: on request / negotiable

Condition: used, Year of construction: 1995, machine/vehicle number: .04503009, with CNC control, manufactured by OKUMA, type: OSP 7000 L, max. turning length: 1000 mm, max. turning diameter: 250 mm, with tool turret with 12 tool positions, all 12 tool positions suitable for driven tools, with filter system and chip conveyor. Gkodpfez Nhrvex Al Uoc

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, CNC lathe Okuma LB 3000 EX II-MY C 450 Control system: OSP-300LA Year of manufacture: 2018 Internal machine number: 77 Turning diameter over bed: 580 mm Turning diameter over slide: 470 mm Travel in X-axis: 260 mm Travel in Y-axis: 120 mm Travel in Z-axis: 510 mm Travel in C-axis: 360 mm Gkodez D Tt Tjpfx Al Uec Max. turning diameter: 340 mm Max. turning length: 450 mm Main spindle speed: 45 - 5,000 rpm Tool holder: BMT Tool turret: V12 (powered) Equipment: - Chip conveyor - One-touch IGF - Touch setter - Main spindle Kitagawa B210 - Coolant system

Condition: used, Year of construction: 2015, functionality: limited functionality, machine/vehicle number: MW130, Technical characteristics: Work Area - Maximum turning diameter: 300 mm - Maximum workpiece length: 276 mm - X-axis travel: 250 mm / Rapid traverse X: 24 m/min - Z-axis travel: 460 mm / Rapid traverse Z: 24 m/min - W-axis travel: 520 mm / Rapid traverse W: 24 m/min Main Spindle - Spindle nose: A2-8 - Maximum speed: Left 3,000 rpm - Continuous power (100% duty cycle): Left – 15 kW / Right – 7.5 kW - Maximum swing over bed: 520 mm - C-axis positioning accuracy: 0.001° - Bar capacity: Left spindle – 80 mm / Right spindle – 53 mm Counter-Spindle: - Spindle speed: 6,000 rpm - Maximum bar diameter: 53 mm - C-axis positioning accuracy: 0.001° - Travel: 520 mm Gkjdpfxsxxrbbj Al Uec Turret with Driven Tools - Tool interface: Okuma interface - Number of stations: 12-station lower turret, all positions driven - Maximum milling speed: 4,500 rpm - Milling motor power: 4.5 kW Electrical Equipment - Operating voltage: 400V, 3-phase, fuse: 151 A - Connected load: 22.5 kVA Dimensions - Machine dimensions (L×W×H): 3,200 × 2,200 × 1,900 mm - Weight: 5,500 kg Main Features and Capabilities: - Horizontal construction: Optimal chip evacuation, parts catcher + custom parts conveyor belt - CNC control: OSP-P300L-R - Chip conveyor - Fire protection system - Tool measuring system (Q SETTER) - Broken tool detection system: Load monitoring auto-learning analyzer controlled by OSP-P300L-R - Workpiece detection on counter-spindle: Low-pressure compressed air gauges - Spindle cooling system - Documentation: Available electronically and as a hard copy Machine status: Operative only with main spindle – sub spindle requires repair Optional Equipment - Bar feeder: TopAutomazione model FU352 - Bar feeder dimensions (L×W×H): 3,500 × 800 × 1,200 mm - Weight: 1,500 kg

Condition: used, functionality: fully functional, machine/vehicle number: 24423, turning length: 200 mm, turning diameter: 210 mm, spindle motor power: 11,185 W, spindle speed (min.): 40 rpm, spindle speed (max.): 4,000 rpm, spindle bore: 58 mm, travel distance X-axis: 178 mm, travel distance Z-axis: 203 mm, rapid traverse X-axis: 15 m/min, rapid traverse Z-axis: 15 m/min, type of input current: three-phase, feed length X-axis: 178 mm, feed length Z-axis: 203 mm, bar passage: 58 mm, total height: 1,800 mm, total length: 2,300 mm, chuck outer diameter: 203 mm, total width: 2,700 mm, bar diameter (max.): 58 mm, spindle nose: A2-6, overall weight: 8,000 kg, spindle diameter: 203 mm, working range: 200 mm, Equipment: rotational speed infinitely variable, Okuma & Howa ACT-2SP-2 CNC lathe with two parallel spindles, equipped with an Okuma OSP5020L numerical control system. The machine features two hydraulic self-centering chucks and two independent tool turrets, enabling the simultaneous machining of two workpieces. Key features: Gkjdpfozpd Alox Al Uec Turning diameter: approximately 210 mm Turning length: approximately 200 mm Chuck diameter: approximately 203 mm Chuck bore: approximately 58 mm X-axis travel: approximately 178 mm Z-axis travel: approximately 203 mm Spindle speed: approximately 40–4,000 rpm Spindle power: approximately 11 kW per spindle CNC control: Okuma OSP5020L Serial number: 24423 Chip conveyor/extractor included The machine is complete with all its main components, currently not in operation and requiring functional testing. Sold as is. Loading onto the transport vehicle will be handled by the seller. Transportation costs remain the responsibility of the buyer. The machine can be inspected at our facility.

Condition: used, Year of construction: 2016, functionality: fully functional, machine/vehicle number: MW141, Technical characteristics: Gksdpfsxxifkjx Al Uoc Work area # Maximum turning diameter: 300 mm # Maximum workpiece length: 276 mm # X-axis travel: 250 mm / Rapid traverse X: 24 m/min # Z-axis travel: 460 mm / Rapid traverse Z: 24 m/min # W-axis travel: 520 mm / Rapid traverse W: 24 m/min Main Spindle # Spindle mount: A2-8 # Maximum spindle speed: Left 3000 rpm # Continuous power (100% duty cycle): Left - 15 kW / Right - 7.5 kW # Max workpiece diameter over bed: 520 mm # C-axis indexing accuracy: 0.001° # Bar capacity: Left spindle - 80 mm / Right spindle - 53 mm Counter-Spindle: # Spindle speed: 6000 rpm # Max bar diameter: 53 mm # C-axis indexing accuracy: 0.001° # Travel: 520 mm Motorized Tool Turret # Tool interface: Okuma interface # Number of stations: 12-position lower turret, all stations powered # Maximum speed: 4500 rpm, Milling motor power: 4.5 kW Electrical equipment # Supply voltage: 400V 3-phase # Connected load: 22.5 kVA Dimensions # Machine dimensions (L×W×H): 3200 × 2200 × 1900 mm; Weight: 5500 kg Main features and capabilities: # Horizontal design: optimal chip evacuation, parts catcher + custom parts conveyor belt # Additional coolant tank with 10 bar pressure for cutting tool cooling # CNC control: OSP-P300L-R # Chip conveyor # Fire protection system # Tool measuring system (Q SETTER) # Broken tool detection: Load force auto-learning analyzer managed by OSP-P300L-R # Workpiece detection on counter-spindle: Low-pressure compressed air sensors # Spindle cooling system # Documentation: Available electronically and as hardcopy Optional: Bar feeder: FMB model Turbo 10-72XT/3200/A # Bar feeder dimensions (L×W×H): 3500 × 800 × 1200 mm; Weight: 1500 kg Machine status: In operation

Condition: used, Year of construction: 2016, functionality: limited functionality, machine/vehicle number: MW127, Technical characteristics: Work Area - Maximum turning diameter: 300 mm - Maximum workpiece length: 276 mm - X-axis travel: 250 mm / Rapid traverse X: 24 m/min - Z-axis travel: 460 mm / Rapid traverse Z: 24 m/min - W-axis travel: 520 mm / Rapid traverse Z: 24 m/min Main Spindle - Spindle nose: A2-8 - Max. speed: Left spindle 3000 rpm - Power at 100% duty cycle: Left spindle - 15 kW / Right spindle - 7.5 kW - Max. swing over bed: 520 mm - C-axis indexing accuracy: 0.001° - Bar capacity: Left spindle - 80 mm / Right spindle - 53 mm Counter-Spindle: - Spindle speed: 6000 rpm - Max. bar diameter: 53 mm - C-axis indexing accuracy: 0.001° - Travel: 520 mm Tool Holder with Driven Tools - Tool interface: Okuma interface - Number of tool stations: 12-position lower turret, all positions driven - Max. speed: 4500 rpm / Milling motor power: 4.5 kW Electrical Equipment - Operating voltage: 400V 3-phase, fused at 151A - Connected load: 22.5 kVA Machine Dimensions - Dimensions (L×W×H): 3200 × 2200 × 1900 mm - Weight: 5500 kg Main Features and Capabilities Godpfxexxihfe Al Ujkc - Horizontal design: optimized chip evacuation, parts catcher and custom-made parts conveyor - Additional emulsion tank with 10 bar pressure for cutting tool cooling - CNC control: OSP-P300L-R - Chip conveyor - Fire protection system - Tool measuring system (Q Setter) - Broken tool detection: Load force auto-learning analyzer controlled by OSP-P300L-R - Part detection at counter spindle: low-pressure compressed air gauges - Spindle cooling system - Documentation: Available electronically and in printed format Machine Status: Currently operating with main spindle only - sub spindle requires repair OPTIONAL: Bar feeder: TopAutomazione model Fu352 SX - Bar feeder dimensions (L×W×H): 3500 × 800 × 1200 mm - Weight: 1500 kg

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, 5-axis CNC turning and milling center Okuma Multus B550-C 2000 Control: OSP-P300SA-H Year of manufacture: 2019 Internal machine number: 71 Travel distances: X-axis: 925 mm Y-axis: 520 mm Z-axis: 2,215 mm Distance between centers: 2,000 mm Turning diameter over bed: 830 mm Spindle bore: 112 mm Tool holder HSK-A100 40-position tool changer Programmable steady rest with hydraulic quill Equipment - Chip conveyor Interlit ISF - Full-stroke cylinder - 6-jaw power chuck SMW Ø 500 IEP Gsdpfozwulyjx Al Uskc - Manual rinsing gun - Drum – trough filter TMF300/980/20 - IFS filter system IFE 5000 - Robot interface Type E - One Touch IGF - Software for input resolution of 0.1 µm - Software package for simultaneous 5-axis machining VTM-1200YB and VTM-2000YB - In-process measurement with Renishaw measuring probe for X/Z/C axis - Automatic zero point adjustment in the Z-axis of the main spindle - High-precision C-axis - Turning function for NC B-axis - Interpolation turning with the X/C/Z axes

Condition: used, Year of construction: 2017, functionality: limited functionality, machine/vehicle number: MW149, Technical specifications: Work Area - Maximum turning diameter: 300 mm - Maximum workpiece length: 276 mm - X-axis travel: 250 mm / Rapid traverse in X: 24 m/min - Z-axis travel: 460 mm / Rapid traverse in Z: 24 m/min - W-axis travel: 520 mm / Rapid traverse in Z: 24 m/min Gkodpfxjxxiiis Al Ujc Main Spindle - Spindle nose: A2-8 - Maximum speed: Left spindle 3000 rpm - Continuous power (100% duty cycle): Left spindle – 15 kW / Right spindle – 7.5 kW - Maximum swing over bed: 520 mm - C-axis indexing accuracy: 0.001° - Bar capacity: Left spindle – 80 mm / Right spindle – 53 mm Sub-Spindle (Counter Spindle) - Spindle speed: 6000 rpm - Maximum bar diameter: 53 mm - C-axis indexing accuracy: 0.001° - Travel: 520 mm Turret with Driven Tools - Tool interface: Okuma interface - Number of stations: 12-position lower turret, all driven stations - Maximum speed: 4500 rpm, Milling motor power: 4.5 kW Electrical System - Operating voltage: 400V 3-phase, fuse protection 151A - Connected load: 22.5 kVA Dimensions - Machine dimensions (L×W×H): 3200 × 2200 × 1900 mm - Weight: 5500 kg Main Features and Capabilities: - Horizontal design for optimal chip evacuation - Parts catcher and custom-made parts conveyor strip - Additional emulsion tank with 10 bar pressure for cutting tool cooling - CNC control: OSP-P300L-R - Chip conveyor - Fire protection system - Tool measurement system (Q SETTER) - Broken tool detection: Load force auto learning analyzer, controlled by OSP-P300L-R - Part detection at sub spindle with low-pressure compressed air gauges - Spindle cooling system - Documentation: available electronically and as manual Option: Bar feeder: TopAutomazione FU352SX - Bar feeder dimensions (L×W×H): 3500 × 800 × 1200 mm - Weight: 1500 kg Machine status: Machine operational only with main spindle – sub spindle requires repair.

Condition: excellent (used), Year of construction: 2008, machine/vehicle number: 135xxx, Equipment: documentation/manual, We are offering this very well-maintained Okuma CNC lathe, manufactured in 2008. Manufacturer: Okuma Gjdpfxez I Sv Ij Al Uokc Year of manufacture: 2008 Machine type: CNC lathe Accessories: Chip conveyor, extraction system, tool holders (available at an additional cost) If you have any questions or require further information, please feel free to send us a message or call us.