Used Okuma Lt 2000 for sale (225)

Condition: excellent (used), Year of construction: 2014, turning length: 700 mm, travel distance X-axis: 205 mm, travel distance Z-axis: 700 mm, spindle motor power: 22,000 W, total height: 2,800 mm, total length: 6,000 mm, total width: 3,900 mm, overall weight: 9,800 kg, Complete machining with twin spindel, upper and lower turrets Kitagawa 3 chuck left and right Tool holders with driven tools axial and radial Large jaws cabinet with inserts OGL Gantry loader with ca 10 Kg load capacity Chip conveyor Paper Filtration Pressure Tank Max. turning Ø: 400mm X-Axis: 205mm Z-Axis: 700mm Spindle bore: 62mm Speedrange: 6000Rpm Spindle power: 22kW Subspindle speeds: 6000Rpm Subspindle bore: 62mm Subspindle power: 15kW ATC / revolver: 16 Speed live tools: 6000Rpm Positions lower revolver:16 Speed live tools: 6000Rpm Power live tools: 7kW Chip conveyor: yes Tool eye: yes Length: 6000mm Width: 3900mm Height: 2800mm Weight: 9800kg Bwjdjyn Em Rjpfx Aftei Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2013, CNC Turning and Milling Center Okuma Multus B400II-W 2000 Control: OSP-P 300S Year of manufacture: 2013 X-axis: 690 mm Y-axis with travel: 230 mm Bjdpfx Aoyk Tv Eoftowi Z-axis: 2,045 mm B-axis: up to 225°, positioning in 0.001° increments Turning length: 2,000 mm Turning diameter: 710 mm Spindle bore: 110 mm Tool holder: HSK 63 Tool magazine: 80 stations Equipment: - Collision avoidance system - Tool monitoring system - Tool measurement device - Tool presetting - Subspindle with tailstock function - Renishaw probe - Automatic door - NC steady rest carrier with SMW SLU-Z 3.2 steady rest - ONE touch IGF - Hinged belt conveyor - Main spindle replaced in 2022

Condition: excellent (used), Year of construction: 2011, CNC Turning and Milling Center Okuma LT 2000 EX – M Control: OSP-P200LA Year of manufacture: 2011 Swing diameter over bed: 400 mm Center distance: 960 mm Turning diameter: 210 mm Spindle speed: 50 – 6,000 rpm Counter spindle speed: 50 – 6,000 rpm Travels: Z-axis: 700 mm W-axis: 730 mm X-axis: 205 mm Bsdoyli Akspfx Aftswi C-axis: 360 degrees (0.001) Equipment: 2 tool turrets, each with 16 stations (all stations live) Touch setter IGF Chip conveyor Bar feeder 3.00 m Main spindle collet chuck Counter spindle three-jaw chuck Parts catcher Workpiece removal system Extraction unit Coolant system with high-pressure pump and paper band filter system

Condition: ready for operation (used), Year of construction: 2022, operating hours: 1,790 h, spindle speed (max.): 6,000 rpm, spindle motor power: 11,500 W, number of axes: 2, This Okuma LT2000-2T1MY was manufactured in 2022. It features two 22KW spindles, a 32-station BMT55 turret, and an OSP-P300LA control system with OSP and ECO suites. It includes a Samsys short bar loader, high-pressure pump, and tank. The machine offers 4-axis machining capabilities with Y-axis in the upper turret and is equipped with a 15" color LCD TFT multi-touch screen. If you are looking to get high-quality turning capabilities consider the Okuma LT2000-2T1MY machine we have for sale. Contact us for more information. Additional equipment Bedpfx Ajyh Ntleftjwi • 22KW Okuma Spindle Main an Sub • 70mm max Bar Capacity Main Spindle and Bar Feeder Samsys • 2 turrets, each 16 stations, BMT55, live tools • proven and extremely sturdy and stable OSP300 • 80 bar Okuma high pressure package (Japan factory fitted stronger seals), on both turrets. Ideal e.g. for deephole drilling in inox, titanium, inconel. • In excellent conition, geometry very good. Okuma serviced and geometry report upon sale. • Automation: Samsys short bar loader • Extra Features: High-pressure pump & tank, high-pressure seal kit, workpiece removal arm, tool height correction in the Y-axis, coolant tank and pumps, detachable wired handwheel, tool monitoring, programmable face printing, and Hi-Cut Pro for driven tools • two BMT55 revolvers with 16 stations each Machine Benefits Technical Machine Benefits • Features: reduction of machine-related idle times, harmonic speed oscillation, automatic speed synchronization, and remote diagnostics during warranty • Machine hours: 2268 • Z taper: 140 mm • Front bearing diameter: 100 mm • Torque: 183 nm • Y-axis: y-axis in the upper turret with a movement range of +50/-45 = 95 mm • Helical interpolation: available with x/y/z linear axes, including eccentric milling with x/y/c axes • Tool monitoring system • Tool corrections: 96 tool corrections per turret Extra Information • Spindle Orientation: Electronic spindle orientation +/- 0.1 Memory: 2 GB part program memory with a maximum program length of 2 MB Data Management: MacMan machine management with integrated production data acquisition Control Unit Control System: CNC double turning center with a control system featuring OSP suite with numerous apps and ECO suite energy-saving features Display: 15" color LCD TFT with 3D color graphics and a multi-touch screen/panel Operating System: Second Windows operating system for operation and data communication Controller Ports: 2 USB 2.0 ports on the control panel Communication: Ethernet/LAN interface with browser and DNC-T1 for program transfer Turret Tool Stations: Upper and lower turrets each with 16 driven tool stations Motor Power: 5.5 kW per motor Speed Range: 50 - 6000 rpm Torque: 22.5 Nm Number of axes Upper turret: X/Y/Z/C (turret can be used both left and right, of course) Number of axes:Sub-spindle (right): lower turret XZC (turret can be used both left and right) chuck main spindle (left) Hainbuch mini 'Axzug' 65 (pull) Maximum clamping diameter on the main chuck (65 mm) chuck secondary spindle yes, Hainbuch mini 'Axfix' 65 (fixed, ideal for part relay into right hand spindle) Maximum clamping diameter on the main chuck (65 mm) Transformer included Inspection is available from 2023. Machine is in great condition and within geometry Maintenance protocol is available • 2x 22 kW PREX spindle, spindle passage on the left side sufficient for 70 mm bars. Mounted chucks: Hainbuch 65 Axzug and Axfix. • 2x 16-station turret, BMT55, top left with Y

Condition: excellent (used), Year of construction: 2010, operating hours: 15,600 h, functionality: fully functional, Spindle speed: 50-6000rpm Bsdewfr R Eopfx Aftswi Movement XA-XB: 205mm ZA-ZB: 700mm W: 730mm YA-YB: 95mm Turrets: 2x 16pos Multitasking V16 Spindlespeed live tools: 45-6000rpm Motors live tools: 5.5/3.7kW Spindle motors: 22/15kW Manufacturing year: 2010.12 Length: 3300mm Width: 2500mm Height: 2500mm Weight: 9000kg Robot interface

Condition: used, OKUMA LB 2000 EX is a CNC turning lathe designed for precision, high accuracy and reliability. Capacities: spindle hole 62 mm; max turning length 300 mm; max turning diameter 430 mm; travels Z 350 mm, X 260 mm. Specs: rapid traverse Z 30 m/min, X 25 m/min; stepless spindle 50–6000 t/min; power 50 Hz 3x 400 V; weight ≈3250 kg; dimensions L1900×W1750×H1850 mm. Equipment: 12-position turret. Capable of tight tolerances; typical applications: automotive, aerospace, medical, watchmaking, machine tools. Bsdpfx Afeyn Ehbstswi

Condition: ready for operation (used), Year of construction: 2021, spindle speed (max.): 5,000 rpm, travel distance X-axis: 270 mm, travel distance Y-axis: 120 mm, spindle motor power: 22,000 W, total height: 2,330 mm, overall weight: 10,000 kg, product length (max.): 3,530 mm, number of axes: 5, This 5-axis Okuma LT 300 MY was manufactured in 2021, featuring a max turning diameter of 350 mm and a bar capacity of 65 mm. It supports spindle speeds up to 5,000 RPM and includes a motorized 12-position turret. Ideal for complex turning operations, the machine also offers rapid traverse rates and a substantial distance between centers of 1,200 mm. Consider the opportunity to buy this Okuma LT 300 MY horizontal turning machine. Contact us for more information. • Distance between centers: 1,200 mm • Max turning diameter: 350 mm • Rotating diameter over guards: 550 mm • Spindle / counter-spindle: ASA 8 Bwedpfx Afsx Imriotoi • Bar capacity: 65 mm • Tailstock / counter-spindle travel (W axis): 940 mm • X axis travel: 270 / 230 mm • Y axis travel: ±60 mm • Z axis travel (ZA / ZB): 930 / 920 mm • Rapid traverse (X / Z / W): 30 / 40 / 40 m/min • Rapid traverse Y axis: 26 m/min • Turret: 12 positions, motorized, VDI 40 • Turret indexing time: 0.25 s • Live tooling speed / power: 100–4,500 rpm, 7.0 / 3.3 kW

Condition: ready for operation (used), Year of construction: 2013, OKUMA LB 2000 EX II - MW lathe from 2013. TOP Automazioni bar feeder. C axis. Sub-spindle. 12-position turret for driven tools. Spindle hours: 11,250. Can be seen in operation in SWITZERLAND. Bwodpfx Afjym Dphotsi

Condition: used, Year of construction: 2001, No. of controlled axes: 8 Swing over bed (mm): 650 Swing over carriage (mm): 250 Distance between centers (mm/in): Max. 1450 / 57.08, Min. 310 / 12.20 Max. turning diameter × length (mm/in): Ø300 × 300 / Ø11.81 × 11.81 SPINDLE Spindle nose taper: JIS A2-11 Bodpjw N Nqvefx Aftjwi Spindle diameter (mm): 120 Spindle hole (mm): 80 Spindle speed range (min⁻¹ / rpm): 38 – 3800 Number of spindle speed ranges: 2 Please see photos of specs. Includes all parts and tools in pallets.

Condition: good (used), Year of construction: 2006, Used OKUMA lathe - Model: LT200-M TwinStar - Year of manufacture 2006 Bedpfx Asv S Su Seftewi - Includes bar magazine - Includes chip conveyor

Condition: ready for operation (used), Year of construction: 2006, spindle speed (max.): 5,000 rpm, travel distance X-axis: 580 mm, travel distance Y-axis: 80 mm, travel distance Z-axis: 935 mm, controller manufacturer: OKUMA, controller model: OSP-P200L, number of axes: 5, This 5-axis Okuma Multus B300-W was manufactured in 2006. It features a robust turn-mill center with a swing over bed of 630 mm and a maximum turning diameter of 450 mm. Equipped with a bar feeder, toolsetter, and a tool magazine holding 40 tools, it ensures efficient operation. The control system is an advanced Okuma OSP-P200L. If you are looking to get high-quality turning capabilities consider the Okuma Multus B300-W machine we have for sale. Contact us for more information. • ATC / tool magazine: 40 positions • Toolsetter • Maximum distance between chucks: 900 mm Bwjdsx D Rvhspfx Aftoi • Maximum turning diameter: 450 mm • Sub spindle: A2-6 nose; 38–5000 rpm • Indexing: C-axis 0.001°; B-axis 0.001° Additional equipment • Barfeeder IF • Approximately 60 HSK 63 tool holders • Half a pallet of soft and hardened chuck jaws • 3 spindle stops (various lengths) • Various collets

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, turning diameter over cross slide: 710 mm, turning diameter: 710 mm, spindle motor power: 11,000 W, spindle speed (min.): 38 rpm, spindle speed (max.): 3,800 rpm, travel distance X-axis: 690 mm, travel distance Y-axis: 115 mm, travel distance Z-axis: 1,545 mm, rapid traverse X-axis: 4 m/min, rapid traverse Y-axis: 26 m/min, rapid traverse Z-axis: 40 m/min, rotational speed (max.): 6,000 rpm, type of input current: three-phase, spindle nose: JIS A2-8, overall weight: 14,000 kg, tool length: 300 mm, tool weight: 10 g, travel distance W-axis: 1,550 mm, Equipment: documentation/manual, Turn mill center OKUMA Multus B400 TECHNICAL CHARACTERISTICS: CNC control: OSP-P200L Distance between centers: 1500 [mm] Max. cutting diameter: 710 [mm] Height of centers over cariage: 710 [mm] Stroke X axis: 690 [mm] Stroke Y axis: -115 / +115 [mm] Stroke Z axis: 1545 [mm] Stroke W axis: 1550 [mm] B axis indexing precision: 0.001 [°] Milling head max. speed: 6000 [rpm] Max. milling spindle power: 11 [kW] Max. milling spindle torque: 65.7 [Nm] Coolant milling head: HSK-A63 Tool magazine capacity: 40 Max. tool length: 300 [mm] Max. tool diameter: 130 [mm] Max. weight of single tool: 10 [Kg] Rapid traverse rate X axis: 4000 [mm/min] Rapid traverse rate Z axis: 40000 [mm/min] Rapid traverse rate Y axis: 26000 [mm/min] Rapid traverse rate W axis: 12000 [mm/min] Spindle nose: JIS A2-8 Min. spindle speed: 38 [rpm] Max. spindle speed: 3800 [rpm] Increment C-axis: 0.001 [°] Supply voltage: 400 [V] Weight: 14000 [Kg] INCLUDED EQUIPMENT: 1 × One-Touch IGF software option 1 × ATLING 2-point steady rest, type AX8I-NAOS (Ø85–360 mm) 1 × SMW AUTOBLOK 3-jaw chuck Ø340 mm, type KNCS-N-340-117 1 × Chuck clamping pressure regulator 1 × Parts catcher 1 × NC tailstock 1 × MARPOSS T18 tool probe 1 × Remote electronic handwheel 40 × HSK-63 tool holders 1 × 2-color status signal lamp 1 × Chip conveyor 1 × Coolant tank 1 × Transformer 1 × Complete set of manuals + OKUMA CD Machine visible under power in our premises by appointment. Price on request, loading on truck included. Possibility of shipping Worldwide. The information on this page has been obtained by the best of our ability. Therefore, its accuracy can not be guaranteed. Bedpeyqx Rzefx Aftjwi Machine similar to brands such as Mazak, DMG Mori, Index Traub, Doosan, Hermle, Chiron, and Biglia. Also includes lathes, mill-turn machines, and milling machines.

Condition: excellent (used), Year of construction: 2023, CNC Turning and Milling Center Okuma Multus B300 II Bwjdeyk Uhcopfx Aftei Control: OSP-P 300SA Year of manufacture: 2023 Axis travels: Turning length: 900 mm Max. turning diameter: 630 mm X-axis: 580 mm Y-axis: 160 mm (+80/-80 mm) Z-axis: 935 mm B-axis: 225° (-30° / +195°; 0.001° increments) C-axis: 360° Tool holder: HSK-A 63 Total tool stations: 40 Spindle speed: 50 – 5,000 rpm Equipment: Chip conveyor NC-controlled tailstock, MT5 Touch setter High-pressure coolant pump IKZ 40 Bar Renishaw probe preparation 3-jaw chuck Kitagawa B212 Ø304 mm

Condition: excellent (used), Year of construction: 2014, CNC Turning and Milling Center Okuma Multus U4000 2SW 1500 Control: OSP-P 300 S-H Year of manufacture: 2014 Spindle hours: approx. 2,050 h Travels: X-axis: 695 mm Y-axis travel: +150/-150 = 300 mm Bwjdoyk Tq Aspfx Aftsi Z-axis: 1,600 mm B-axis: 240°, positioning in 0.001° increments C-axis: 360°, positioning in 0.001° increments W-axis: 1,524 mm Turning diameter: 650 mm Turning length: 1,500 mm Spindle mounting: HSK 63 Total tool stations: 40 Accessories: XA and YA axes equipped with direct absolute measuring system (Okuma ABSO-Scale) In-process measurement with Renishaw probe for X/Z axes Measurement in Y-axis including angled axis measurement Kitagawa B215A11 max. 2,800 rpm Kitagawa B210A8 max. 4,200 rpm Kitagawa F 2596-H01 hollow chuck cylinder Ø96 mm One-Touch IGF Multi-function tool software Harmonic spindle speed vibration control Simultaneous 5-axis machining software package Chip conveyor Coolant tank with 70 bar high-pressure pump

Condition: excellent (used), Year of construction: 2014, CNC Turning and Milling Center Okuma Multus U4000 1SC 1500 BigBore Control: OSP-P 300S Year of manufacture: 2014 X-axis: 695 mm Y-axis travel: +150/-150 = 300 mm Z-axis: 1,600 mm B-axis: 240°, positioning in 0.001° increments C-axis: 360°, positioning in 0.001° increments Turning diameter: 650 mm Turning length: 1,500 mm Spindle interface: Capto C6 Total tool stations: 80 Equipment: - NC tailstock - Travelling hydraulic steady rest AX 5 on NC axis - Coolant system with band filter - Kitagawa BB 212-11 hydraulic 3-jaw chuck - Automatic tool touch setter - High-pressure coolant system (IKZ) - Software option High Cut Pro (High-accuracy package with Super Nurbs) - CAS collision avoidance system - Main spindle orientation, electric - Multitool with turning function for Y-axis - Helix function - Automatic main power shut-off Bsdpeyk Ddgefx Aftewi - DNC-DT interface - Machining Navi M-i (milling), speed control to minimize vibration - One-Touch IGF - Chip conveyor

Condition: excellent (used), functionality: fully functional, Machine type: CNC Turning-Milling Center Manufacturer: Okuma Model: Multus U4000 2SC 1500 Year of Commissioning: 2017 (as ex-stock machine) Control: OSP P300S Spindle Hours: approx. 3,000 Included: Various tools and chuck jaws Condition: Very good Delivery: Short lead time – as agreed Equipment and technical details: ▪ Enlarged main spindle KK size 11 Front bearing Ø 160 mm Speed range: 3,000 rpm Bore diameter: Ø 112 mm Motor power: 32 kW Torque: 955 Nm ▪ Hollow power chuck cylinder Ø 127mm, SMW VNK 320-127 with Ø 127 mm bore ▪ Pressure reducing valve, adjustable range 8-70 bar ▪ Tailstock ▪ Turning length approx. 1,500 mm ▪ H1 turret (1 station) ▪ Y-axis ▪ B-axis 0.001° ▪ 40-station tool magazine ▪ Additional lower turret with 12 stations ▪ Tool spindle 12,000 rpm ▪ Hinge belt chip conveyor: Heavy-duty chip conveyor with low-maintenance self-cleaning function ▪ Drum sump filter TMF300 with clean fluid tank 980 L Bjdpsxw Thmofx Aftewi ▪ Supply pump TC160/740, 8 bar ▪ Supply pump RSP 20/32-070-1-1-0, 70 bar ▪ Self-centering steady rest on the lower turret (not possible in combination with driven tools for lower turret) ▪ Door automation ▪ Robot interface Type E for connecting additional loading/unloading systems to single-spindle machines ▪ 3D machine model for simulation in CAM system Main drive (Okuma motor spindle): 22kW / 700 Nm / 50–4,200 rpm Spindle nose KK size 8 Front spindle bearing Ø 140 mm Spindle bore Ø 91 mm Speed range: 2 steps Range switching at full speed ▪ Lower turret: 12 stations ZB-axis with cylindrical roller guide XB-axis with slideways ▪ Real-time Collision Avoidance System (CAS) ▪ 19" color LCD TFT (1280x1024) with 3D color graphics as touch screen/panel with vertical display and adjustable tilt keyboard ▪ Second operating system Windows 7 for operation and data communication, open and freely usable for Windows 7 compatible applications ▪ Programmable tailstock on W-axis with hydraulic quill ▪ Tool magazine 40 stations ▪ C-axis 360°, 0.001° positioning ▪ Y-axis travel +150 mm / -150 mm = 300 mm ▪ B-axis 240°, 0.001° positioning ▪ Tool spindle (Okuma motor spindle): 22 kW / 120 Nm / 12,000 rpm ▪ Internal coolant supply for rotating tools, pump with max. 20 bar pressure Including bag filter, external cooling of tool spindle, pump with max. 3 bar pressure ▪ Tool system: HSK-A63 ▪ Tool monitoring system for tool life and breakage ▪ Tool measurement device (using standard chuck) for safe setup ▪ Machine management MacMan with integrated BDE (operating data acquisition) ▪ Part program memory 2 GB ▪ Max. length of individual part program: 2 MB ▪ 2 USB 2.0 ports ▪ Ethernet interface with browser and DNC-T1 for program transmission ▪ Harmonic speed oscillation via periodic speed change ▪ Tool height correction on Y-axis for turning tools ▪ Circular thread milling X/Z/Y/B (helical interpolation) Including eccentric milling X/Y/C ▪ Hi-Cut Pro high speed control for rotary tools ▪ 10 workpiece zero points (coordinate system selection) ▪ Coordinate conversion (shift, rotate) ▪ Electronic spindle orientation +/- 0.1° Optional: ▪ Transport organization and implementation ▪ Machine installation and setup ▪ Commissioning of the machine

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 132542, turning diameter over cross slide: 470 mm, turning length: 300 mm, turning diameter: 580 mm, spindle bore: 62 mm, spindle speed (max.): 6,000 rpm, travel distance X-axis: 260 mm, travel distance Z-axis: 380 mm, spindle motor power: 11,000 W, rapid traverse X-axis: 25 m/min, rapid traverse Z-axis: 30 m/min, total height: 1,839 mm, total length: 1,865 mm, total width: 1,734 mm, overall weight: 3,200 kg, Equipment: documentation/manual, OKUMA LB2000EX-MC x 300mm OSP P200L CNC-Controller Number of axis - 3 Bedpsxrnr Nofx Aftewi Swing over bed - 580mm Swing over cross slide - 470mm Max dia. turning - 360 mm Max turning length - 300 mm X axis travel - 260 mm Z axis stroke - 390 mm Rapid X-axis 25,000 mm/min Z axis rapid 30,000 mm/min Spindle nose - Flat Main spindle speed - 6000 rpm Main spindle power - 11 kW Main spindle diameter - 100 mm Kitagawa 6 inch chuck Driven tools - 6000rpm Driven tools - 5,5kW Turret type VDI 12 Stations Square tool section - 20mm Boring bar section - 32mm Tailstock Quill diameter - 70mm NC tailstock stroke - 415mm Konus - MK 4 Chip conveyor type high Wight - 3200kg One Touch dialog with colour High presure coolent

Condition: good (used), Year of construction: 2008, functionality: fully functional, spindle speed (min.): 25 rpm, spindle speed (max.): 5,000 rpm, Equipment: documentation/manual, rotational speed infinitely variable, Okuma Multus B300-W 6-axis turning and milling center - Okuma OSP P200L - Year of manufacture: 2008 - Cutting time: 13,900 h - H1 milling spindle: 6,000 rpm - Main spindle: 3,800 rpm - Sub spindle: 5,000 rpm Bjdpfx Aeyiu Dbjftowi - ATC 60 system HSKA-63 (60 tools) - Geometry in very good condition - Marpos tool sensor - Chip conveyor & coolant system with small band filter unit - Optionally extensive tool accessories available

Condition: used, Year of construction: 2001, functionality: fully functional, OKUMA CNC lathe TL10-M in working condition ATTENTION, WITHOUT THE MIST DUST COLLECTOR! Specifications: - Year of manufacture: 2001 - Control: Okuma OSP-U100L - Chip conveyor - Including several tools Main spindle: - Bar capacity: 50mm - Spindle bore: 53mm - Max. swing over bed: 400mm - Max. turning diameter: 210mm - Turning length: 130mm - Spindle speed: 6000rpm Sub spindle: - Bar capacity: 50mm Bwsdpfjw Swp Ejx Aftji - Spindle speed: 6000rpm Turrets: - Number of turrets: 2 - Number of stations: 12 - Number of powered stations: 12 - X-stroke: 195mm - Z-stroke: 700mm Accessories: - Mist dust collector not included!!! - CTS (coolant through spindle) in both turrets - Live tooling in both turrets - Chip conveyor - 2 x chuck 200mm - Several tool holders: 11 x single tool holder 20x20 2 x double tool holder 20x20 2 x top tool holder 20x20 2 x round tool holder 16 16 x round tool holder 25 4 x live tool holder radial 4 x live tool holder axial - Coolant installation - Machine manuals

Condition: good (used), Year of construction: 2008, functionality: fully functional, Okuma Multus B300-W 6-axis turning and milling center - Okuma OSP P200L - Year 2008 - Cutting time: 10,500 h Bsdpfx Asyg Rf Neftjwi - H1 milling spindle: 6,000 rpm - Main spindle: 3,800 rpm, Rota NC 315-86 - Counter spindle: 5,000 rpm - ATC 60 system HSKA-63 (60 tools) - Geometry: very good - Marpos tool sensor

Condition: good (used), Year of construction: 2010, functionality: fully functional, turning length: 1,000 mm, turning diameter: 630 mm, spindle speed (max.): 3,800 rpm, travel distance X-axis: 580 mm, travel distance Y-axis: 160 mm, travel distance Z-axis: 935 mm, rotational speed (max.): 10,000 rpm, Equipment: rotational speed infinitely variable, Technical specifications for Okuma Multus B300-W with Y-axis and bar loader Year of manufacture: 2010 Machine configuration: • Control: Okuma OSP200A (including simultaneous use of Hi-Cut PRO and CAS) • Tool spindle: 10,000 rpm with HSK-A63 • Air blast through spindle center • Tool magazine: 60 stations • Workpiece catcher • Renishaw 3D probe RMP60 including preparation for in-process measuring • Swarf conveyor: hinge belt Interlit • High-pressure pump: Brinkmann TM26/180 • Preparation for oil mist extraction • Short bar loader: SAMSYS Multi-3000LR 1240/65 Main spindle: • BigBore with A8 spindle nose – speed: 38-3,800 rpm • A8 add-on kit for through-hole clamping for max. 65 mm bar diameter • SMW collet chuck, axial draw – Hainbuch Spanntop system Counter spindle: • Max. speed: 5,000 rpm with A6 spindle nose Bodpoyiayxefx Aftjwi • A6 add-on kit for through-hole clamping • Workpiece ejector for counter spindle, Ø 52 mm Working area: • Maximum turning diameter: Ø 630 mm • Swing diameter over cross section/bed: Ø 630 mm • X-axis travel: 580 mm – rapid traverse 40 m/min • Z-axis travel: 935 mm – rapid traverse 40 m/min • Y-axis travel: 160 mm (+80/-80) – rapid traverse 26 m/min • W-axis travel: 1,000 mm – rapid traverse 20 m/min • B-axis is incremental, 0.001 degree Weight: approx. 10,300 kg

Condition: like new (used), Year of construction: 2022, operating hours: 1,325 h, functionality: fully functional, First installation in 2023 Controller OPS-P300LA control system Swing diameter: 450 mm Bedpfx Aexpfn Asftowi Center distance: 500 mm Max. turning diameter: 230 mm X-axis: 165 mm Z-axis: 470 mm Number of turrets: 1 Turret design: V12 Tool positions: 12 Driven tools: none Max. cutter cross-section: 25 x 25 mm Max. drill diameter: 32 mm Speed ​​range: 45–5000 rpm Spindle bore diameter: 62 mm Tailstock: yes Parts catcher: yes Prepared for bar feeder magazine: yes The machine is barely used and available for immediate purchase. Live in Hungary.

Condition: ready for operation (used), Year of construction: 2022, operating hours: 1,771 h, spindle speed (max.): 3,800 rpm, travel distance Y-axis: 160 mm, controller manufacturer: OKUMA, controller model: OSP-P300SA, number of slots in tool magazine: 40, number of axes: 4, This 4-axis Okuma Multus B300 II Turn Mill Centre was manufactured in 2022. It features a control unit OKUMA OSP-P300SA, a main spindle with a three-jaw chuck diameter of 304mm, and a counter spindle with a C-axis. The milling spindle supports up to 6000 rpm with a torque of 65.7 Nm. If you are looking to get high-quality milling and turning capabilities, consider the Okuma Multus B300 II machine we have for sale. Contact us for more information. Additional equipment • HI-Cut Pro high-speed control Machine Benefits Qualitative Machine Benefits • Enlarged main spindle • Counter spindle with c-axis on w-axis: rapid traverse: 20m/min max: 5000 1/min torque: 328nm spindle nose: kk size 6 spindle bore diameter: 62mm hollow clamping cylinder and three-jaw chuck diameter: 254mm bore in drawtube: 52mm diameter Bedjx D Hllspfx Aftswi Technical Machine Benefits • 8 short tapers • Front bearing diameter: 120mm • Boring diameter: 80mm • Torque: 412 nm • Helical interpolation • 10 workpiece zero points • Tool spindle and c-axis: 0. 001° for main spindle • Ikz: 20 bar • Hsk a 63 • Electr. Spindle orientation: +/- 0. 1° Extra Information New spindle in August 2024 Technical Specification Taper Size HSK 63

Condition: excellent (used), Year of construction: 2018, Okuma GENOS L2000-e Year: 2018 Max turning dia ( mm ) Ø200 Max work length ( mm ) 380 Travels X axis (mm) 165 Z axis (mm) 400 C axis 360° ( 0.001° increments) Spindle speed ( min-1 ) 5,000 Spindle nose JIS A2-6 Turret type V12 VDI (Axial) No. of tools 12 (L/M) OD tool shank (mm) 20×20 ID tool shank dia (mm) Ø32 Milling tool Spindle speed (rpm) 6,000 Rapid traverse (X, Z ) m/min X:25 , Z:30 Rapid traverse (C) (rpm) C：200 Tailstock quill diameter (mm) Ø90 Tapered bore type MT.5 (revolving center) Quill travel (mm) 100 Motors, Main spindle (20min/cont) (kW) VAC15/11 Milling tool spindle (kW) PREX 4.0/1.8 (25min／cont) Coolant pump motor (kW) 0.8 Machine size Height (mm) 1,620 Floor space (mm) 2100×1850 Weight (kg) 3,700 Accessories/options: Bwedjyk Hwijpfx Aftsi - C-axis - static tool holders - tailstock - foot pedals for chuck and tailstock - center sleeve for tailstock - swarf conveyor - coolant tank - LNS feeder - documentations

Condition: ready for operation (used), Year of construction: 2008, turning length: 1,500 mm, turning diameter: 710 mm, rotational speed (max.): 3,800 rpm, CNC OSP200L Bwjdpfeyfwgqjx Aftsi C axis, milling spindle 25-tool changer capacity 1500x710 mm