Used Okuma Mc 60 Vae for sale (228)

Condition: ready for operation (used), operating hours: 11,525 h, functionality: fully functional, machine/vehicle number: 0613, travel distance X-axis: 1,500 mm, travel distance Y-axis: 630 mm, travel distance Z-axis: 610 mm, controller model: Okuma OSP7000M, spindle speed (max.): 5,000 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Working area Travel in X-axis: 1,500 mm Travel in Y-axis: 630 mm Travel in Z-axis: 610 mm Distance from spindle nose to table surface: 230–840 mm Fpjdpfxsztpmde Al Uen Distance from spindle center to front of column: 730 mm Main spindle Spindle speed range: 10–5,000 rpm Continuously variable speed control Spindle taper: 7/24, No. 50 Tool holder: BT50 Angle: 90° Diameter of front spindle bearing: 100 mm Work table Effective table size: 1,530 × 630 mm Table size: 1,800 × 780 mm Maximum table load capacity: 1,500 kg T-slot width: 18 mm Number of T-slots: 5 T-slot spacing: 125 mm Distance from table surface to bottom edge of machine bed: 830 mm Feeds Rapid traverse X/Y-axis: 15,000 mm/min Rapid traverse Z-axis: 13,000 mm/min Cutting feed X/Y/Z-axis: 1–10,000 mm/min Average continuous cutting feed: 1–2,000 mm/min Tool changer Number of positions in tool magazine: 20 Tools included in the machine MACHINE DETAILS Control model: Okuma OSP7000M Operating hours (as of 12.04.2026) Power-on hours: 59,180 h Operating hours: 16,510 h Machining hours: 11,525 h Dimensions & weight Machine dimensions (L × W × H): 4,570 × 4,530 × 3,265 mm Weight: 11 t EQUIPMENT Kitagawa NC rotary table TSR180A Handheld terminal Mac mini IH Oil skimmer Chip conveyor Tools included in the machine Machine manuals Original tolerance reports Parameter backup / Backup of machine parameters

Condition: good (used), Year of construction: 2008, functionality: fully functional, CNC lathe Okuma LB 3000 EX MC 500 Control: OSP-P200L Year of manufacture: 2008 Internal machine number: 69 Turning length: 500 mm Turning diameter: 340 mm Swinging diameter over bed: 530 mm Spindle speed: 4,200 rpm Tool holder: BMT 60 Tool turret, 12 stations (powered) Fpsdpszwlw Tsfx Al Usn C-axis: 0.001 degrees Equipment: - One-touch IGF - Chip conveyor - Touch setter - 3-jaw chuck Kitagawa B-210 - NC tailstock

Condition: used, Year of construction: 1998, X/Y/Z - 1000/800/810 mm Pallet size 630 x 630 mm Fpsdpfx Ajz H H Sbsl Uon Distance between pallet & spindle 50-850 mm Pallet indexing 1 degree. Spindle taper BT 50 Spindle speeds 50-5000 rpm Pallet changer w/6 stations No. of stations in changer 150 pcs. High pressure coolant through spindle Control: OSP-U100 Equipped with: 10 toolholders Chip conveyor Pallet changer w/6 stations 6 pallets

Condition: used, Year of construction: 2011, x-travel 762 mm y-travel 460 mm z-travel 460 mm table surface area 1.000 x 460 mm control Okuma OSP 20 M rapid traverse 40/40/32 m/min table load 0,7 t turning speed range 12000 U/min power capacity - milling spindle 22/18,5 kW max. torque on the spindle 198 Nm no. of tools in the magazine 32 Stück internal coolant system feed 20/43 bar tool taper BT 40 weight of the machine ca. 6,8 t dimensions 2.22 x 2,9 x 2,75 m CNC- vertical machining centre with internal coolant First installation 2014 - coolant through the spindel 15 bar, 20 ltr/min - air throug the spindle - chip conveyor - signal lamp Fpedpfx Aljz Nn Azs Uen - Dual tool change arm - external electric hand weel - tool lenght measuring and toolbreak detection - filter system - X- axis in gantry style - spindle oil cooler - thermal compensation spindel and bed - USB and Ethernet port - Hi-Cut Pro high speed control - 100 Zero offsets - thread milling

Condition: used, Year of construction: 2016, functionality: fully functional, machine/vehicle number: 0712-100481, feed length X-axis: 1,050 mm, feed length Y-axis: 560 mm, feed length Z-axis: 460 mm, controller manufacturer: Okuma, controller model: OSP, table width: 560 mm, table length: 1,300 mm, overall weight: 7,500 kg, type of input current: three-phase, Equipment: documentation/manual, For sale: used Okuma Genos M560R-V milling machine. X/Y/Z: 1050 x 560 x 460 mm, Table: 1300 x 560 mm Fpjdpfjz Ahx Rsx Al Ujn OSP control system VAT invoice provided. Please contact me for further details. Type: GENOS M560R-V Serial number: 0712-100481 Year of manufacture: 2016 Gross weight: 7500 kg

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 132542, turning diameter over cross slide: 470 mm, turning length: 300 mm, turning diameter: 580 mm, spindle bore: 62 mm, spindle speed (max.): 6,000 rpm, travel distance X-axis: 260 mm, travel distance Z-axis: 380 mm, spindle motor power: 11,000 W, rapid traverse X-axis: 25 m/min, rapid traverse Z-axis: 30 m/min, total height: 1,839 mm, total length: 1,865 mm, total width: 1,734 mm, overall weight: 3,200 kg, Equipment: documentation/manual, OKUMA LB2000EX-MC x 300mm OSP P200L CNC-Controller Number of axis - 3 Swing over bed - 580mm Swing over cross slide - 470mm Max dia. turning - 360 mm Max turning length - 300 mm X axis travel - 260 mm Z axis stroke - 390 mm Rapid X-axis 25,000 mm/min Z axis rapid 30,000 mm/min Spindle nose - Flat Main spindle speed - 6000 rpm Main spindle power - 11 kW Main spindle diameter - 100 mm Kitagawa 6 inch chuck Driven tools - 6000rpm Driven tools - 5,5kW Turret type VDI 12 Stations Square tool section - 20mm Boring bar section - 32mm Tailstock Quill diameter - 70mm NC tailstock stroke - 415mm Konus - MK 4 Chip conveyor type high Fsdpfexrnr Njx Al Uopn Wight - 3200kg One Touch dialog with colour High presure coolent

Condition: excellent (used), Year of construction: 2012, operating hours: 6,100 h, functionality: fully functional, Control unit: OSP-P200MA-R Table dimensions: 1000 x 460 mm Table load: max. 700 kg X-axis travel: 762 mm Fedpfx Aey T I U Ajl Uepn Y-axis travel: 460 mm Z-axis travel: 460 mm Distance between spindle nose and table surface: 150 – 610 mm Spindle speed: 15000 rpm Rapid traverses: X/Y: 40 m/min, Z: 32 m/min Drive power: 22 / 18.5 kW Taper: BT40 / MAS 403 Tool magazine: 32 stations Max. tool length: 300 mm Max. tool weight: 8 kgs Max. tool diameter: D80 mm Weight: 6800 kgs Dimensions (L x W x H): 2810 x 2225 x 2750 mm Accessories / Equipment: - MAYFRAN chip conveyor - Coolant system - Spindle cooler - Transformer - Mac NAVI - Machine feet - Documentation The machine is being sold due to company liquidation. It is still under power in Hungary.

Year of construction: 2012, condition: used, Empty weight: 10.900 kg Length: 90 cm Serial number: 163562 Max. turning diameter: 630 mm Max. turning length: 900 mm Fedpoz Ep D Refx Al Uspn Max. workpiece diameter: approx. 450 mm Main spindle: A2-8 Main spindle speed: 45–5000 rpm Main spindle power: 15 / 11 kW Main spindle bore: approx. 79 mm Sub-spindle speed: up to 5,000 rpm Sub-spindle power: 15 / 11 kW X-axis travel: 580 mm Y-axis travel: 160 mm mm) Z-axis travel: 935 mm B-axis range: 225° (-30° to +195°) B-axis resolution: 0.001° C-axis: 360° C-axis resolution: 0.001° Milling spindle speed: 6,000 rpm Milling spindle power: approx. 11 kW Tool holder: HSK-A63 Tool magazine: 60 positions Automatic tool changer: Yes Control: Okuma OSP-P300S Main chuck: Hainbuch Spanntop nova Secondary chuck: Hainbuch Spanntop nova Equipped with: oil-mist filter, tool pre setter Machine weight: approx. 10,900 kg Overall dimensions L×W×H: approx. 4,216 × 2,286 × 2,591 mm Online auction of mold making, die manufacturing machine tools (e.g. CNC surface grinding, turning and milling machines FEHLMAN, HEDELIUS, ABA, G+H, SUNNEN, BIGLIA, OKUMA etc.) due to the full plant closure of metal working company location Meusburger Germany GmbH at Viernheim (near Mannheim) in Germany. The online auction opens Thursday 24 September and closes Tuesday 13 October. Register your account via our website and place your bid. For viewings and inspections check the auction information on the website. Viewing day is on: - Thursday 8 October Dome Auctions is an innovative auction platform dedicated exclusively to the industrial sector. By focusing on machinery sales from business closures, restructurings, and bankruptcies, we provide a trusted marketplace where buyers and sellers connect with confidence. Unlike general auction houses, Dome Auctions specializes in selling complete industrial assets directly from factories, ensuring quality and reliability. With a commitment to transparency, industry expertise, and tailored service, we streamline the sales process and maximize value for all parties. As online auctions continue to grow in the European industrial market, Dome Auctions offers a professional and efficient solution for companies seeking high-quality machinery at competitive prices.

Condition: used, Year of construction: 1989, x-travel 650 mm Fpodox U A Rnspfx Al Uen y-travel 410 mm z-travel 450 mm travel x vor 1000 mm control mc4va

Condition: excellent (used), Year of construction: 2007, CNC Lathe Okuma LB 3000 EX -M C1000 Control: OSP-P200 Year of manufacture: 2007 Internal machine no.: 17 Turning length: 1,000 mm Turning diameter: 340 mm Swing diameter over bed: 580 mm Spindle speed: 45 – 5,000 rpm Tool turret: 12 stations (driven) Bar capacity: 80 mm Direct mount: BMT 60 Fodpfx Asyk Sgpjl Uspn Equipment: - One Touch IGF - Chip conveyor - Touch setter - 3-jaw chuck (SMW 315 HB), capacity 85 mm - NC tailstock - Multi-language control - Coolant pump 8 bar

Condition: good (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 810 mm, spindle speed (max.): 6,000 rpm, number of spindles: 1, number of slots in tool magazine: 150, Used Okuma MA-600HB Horizontal Machining Center Year: 2008 Spindle cooling Fodpfxjyrf I Ao Al Ujpn Max. 6000 rpm Z- 810 mm X- 1000 mm Y- 900 mm Tool magazine for 150 tools 1 spindle 4 axes 10-pallet system We have 2 units available. Price is per unit, ex location.

Condition: good (used), Year of construction: 2008, travel distance X-axis: 1,000 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 810 mm, spindle speed (max.): 6,000 rpm, Used Okuma MA-600 HB horizontal machining center, year 2008, including turncut function, spindle cooling, 6000 rpm. Travels: Z-810 mm, X-1000 mm, Y-900 mm. Tool magazine for 150 tools, 1 spindle, 4 axes, 6-pallet changer function. Fedpfsywicvjx Al Uspn

Condition: used, Year of construction: 2008, Control OKUMA OSP-P200M. Cooling threw spindle. Rotating axe A Tsudakoma 250. Chip conveyor RENISHAW OMP40 Tool probe Velikost upínací plochy 1000 x 460 mm Fpsdpfszqtbgsx Al Usn Rozsah pojezdů os: Axe X 762 mm Axe Y 460 mm Axe Z 460 mm Spindle revolutions 50 - 8000 rpm DIN 40 Number of tool positions 48 Machine dimensions 2805 x 2160 x 2746 mm Machine weight 7100 kg

Condition: used, Year of construction: 2006, Okuma Space Centre MA-600HB Horizontal Twin Pallet Machining Centre with Okuma OSP-P200M CNC Control System. Serial No. 1296158 (2006), X Axis = 1,000mm, Y Axis = 900mm, Z Axis 1,000mm, Spindle Nose NT 50, Spindle Speed Std 6,000rpm, Spindle Drive VAC 30/22kw, Pallet Size 630 x 630mm, Max Weight on Pallet 1200kg, Pallet Indexing 1 deg, Pallet Change Time 11 seconds, Max Work Piece Size Ø 1,000 x 900 High, Axis Drives Feed Rate X, Y, Z Axis 1 - 60,000mm/min, Rapid Traverse X, Y, Z Axis 60,000mm/Min, Automatic Toolchanger No. of Tools 40, Floor Space 3,380 x 6,140mm, Machine Weight 24,000kg Approx. Qty of 50 INT Spindle Tools (Back End Only). Country of Origin: Japan Fpjdpoz Arzvofx Al Uen Location: These lots are located in Swindon, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.

Condition: excellent (used), Year of construction: 2008, CNC lathe Okuma LU35-M-2ST-600 Control system: OSP-P200L Year of manufacture: 2008 Internal machine number: 25 Fedpfx Alsyliqus Uopn Max. turning diameter: 550 mm Max. turning length: 600 mm Bore diameter of spindle: 90 mm Spindle speed: 3,200 rpm Main spindle: 30 kW A-turret: 12 stations (all powered) B-turret: 10 stations Tool holder: VDI 50 Accessories Chuck Kitagawa N15 Chip conveyor Interlit Including external coolant system Door automation Touch setter

Condition: used, Year of construction: 2004, power: 37 kW (50.31 HP), travel distance X-axis: 1,000 mm, travel distance Y-axis: 950 mm, travel distance Z-axis: 1,000 mm, controller manufacturer: Okuma, total height: 3,280 mm, total length: 6,500 mm, total width: 3,460 mm, table width: 630 mm, controller model: OSP-E100M, spindle speed (min.): 12,000 rpm, table height: 630 mm, Okuma MA-600 HB Space Center OSP E 100M control Dimensions pallet 630 x 630 mm Number of pallets 2x X-axis travel 1000 mm Y-axis travel: 950 mm Z-axis travel 1000 mm Indexing of table 1° Spindle holder MAS BT 50 Spindle speed 12,000 rpm Spindle motor 37/26 kW Positions in the tool magazine 60 If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Fpodpfey N Afujx Al Ujn Feel free to view our other advertisements for a complete overview of our stock.

Condition: excellent (used), Year of construction: 2017, CNC Lathe Okuma LB 4000 EX II – M C750 Control: OSP-P300LA Year of manufacture: 2017 Internal machine no.: 22 Turning length: 750 mm Turning diameter: 430 mm Swing diameter over bed: Ø 670 mm Swing diameter over carriage: Ø 480 mm Spindle speed: 42 – 4,200 rpm Tool turret: V12 (all stations driven) Equipment: Chip conveyor Touch setter OneTouch IGF 3-jaw chuck Tailstock Fedpfxeyk Uims Al Uopn

Condition: used, Year of construction: 2001, x-travel 560 mm y-travel 460 mm Fedpfsyi Hv Njx Al Uepn z-travel 450 mm Control OSP U10 M total power requirement 7,5 kW weight of the machine ca. 5 t

Condition: used, Rated voltage: 400V, phases: 3, frequency: 50Hz, max. power consumption: 57.9kVA, total current consumption: approx. 83.8A, max. motor current consumption: 94A, current interruption at: 10kA, connected load: 47.8kVA, control: Okuma OSP-U100L, an on-site inspection is possible. Fpsdpez E Nq Rjfx Al Uen

Condition: used, Year of construction: 2008, operating hours: 18,349 h, turning length: 1,000 mm, turning diameter: 340 mm, spindle speed (max.): 4,800 rpm, Produced in 2008, cutting time 18,349 h, OSP P200L, 4-axis double turret VDI40, A-turret VDI40 V12 with live tools, B-turret VDI40 V8, turning diameter 340 mm, turning length 1000 mm, standard spindle bore, main spindle 4800 rpm, tailstock, manual, touchsetter, chip conveyor, coolant station, in good working and geometric condition, optional tools available. Fedjyu N Uxepfx Al Uopn

Condition: good (used), Year of construction: 2000, functionality: fully functional, travel distance X-axis: 560 mm, travel distance Y-axis: 460 mm, travel distance Z-axis: 450 mm, Equipment: chip conveyor, documentation/manual, Machine Name - Okuma Machine Model - MX45VAE Y.O.M 2000 Descriptions - OSP 700M Spindle Speeds 7000 rpm BT40 taper Table Size 1000 mm x 460mm X – Axis Travel 560mm Fodpfjzair Ujx Al Ujpn Y – Axis Travel 460mm Z – Axis Travel 450mm 20 station ATC Renishaw tool setter Renishaw work probe Coolant system and conveyor 2 x identical machines available

Condition: ready for operation (used), Year of construction: 2013, operating hours: 21,658 h, travel distance X-axis: 762 mm, travel distance Y-axis: 460 mm, travel distance Z-axis: 460 mm, controller manufacturer: OKUMA, controller model: OSP-P200M, table load: 800 kg, overall weight: 6,000 kg, spindle speed (max.): 15,000 rpm, spindle motor power: 15,000 W, number of slots in tool magazine: 20, number of axes: 3, This 3-axis Okuma M460R-VE vertical machining centre was manufactured in 2013. It features a robust X-axis travel of 762 mm, Y-axis travel of 460 mm, and Z-axis travel of 460 mm. The machine is equipped with a powerful 15 kW spindle that can reach speeds of up to 15,000 rpm, along with a tool magazine capacity of 20. If you are looking to get high-quality machining capabilities, consider the Okuma M460R-VE machine we have for sale. Contact us for further details. • Table size: 1000 × 460 mm Fpedpfxsy Nb Nxe Al Ujn Technical Specification Taper Size BT 40

Condition: used, Year of construction: 2008, Technical details: max. turning diameter: 350 mm turning length: 1040 mm control: OSP E 100 L Fanuc greates pass round over bed: 550 mm Fpedpjz Ig Sqofx Al Usn Max. distance between centres: 1200 mm max. workpiecediameter: 550 mm Traverse X-Axis 1: 270 Traverse X-Axis 2: 230 mm Traverse Y-Axis 1: 120 (±60) mm Traverse Z-Axis 1: 930 mm Traverse Z-Axis 2: 920 mm Spindle 1 Power: 22 / 15 kW Spindle 1 RPM: 5000 1/min spindle nose: JIS A2-8 bar material dia.: 65 mm C-Axis: 0,001° Number of Turrets: 2 Turret No.1 stations / rotary tools: 12/12 VDI 40 Turret 1 tool RPM: 4500 1/min Turret 1 power rotary tools: 7.0 / 3,3 kW Turret No.2 stations / rotary tools: 12/12 VDI 40 Turret 2 tool RPM: 4500 1/min Turret 2 power rotary tools: 7.0 / 3,3 kW rapid traverse X-axis: 30 m/min rapid traverse Y-axis: 26 m/min rapid traverse Z-axis: 40 m/min total power requirement: 33 kVA weight of the machine ca.: 10 t dimensions of the machine ca.: 7,0 x 2,3 x 2,3 m Accerories Chip conveyor part counter total counter tool setting Signal lamp 3 colors spindle load monitor B Spindle 1 Chuck 300 mm CNC Turning-and Milling Center The Okuma LT 300 MY has 2 turrets, the upper turret has Y-axis with milling function, the lower turret has milling function. It has main- and subspindle. This allows synchronized machining using 2 turrets. There is an Interlit paperfilter/high pressuire system with the machine with coolant cooler. There are 7 identical machines available, all in very good and well maintained condition. *

Condition: ready for operation (used), Year of construction: 2014, spindle speed (max.): 5,000 rpm, travel distance X-axis: 260 mm, travel distance Z-axis: 1,065 mm, spindle motor power: 22,000 W, overall weight: 6,500 kg, number of axes: 3, Horizontal turning machine manufactured in 2014. This Okuma LB3000EXII features a maximum turning diameter of 340 mm and a turning length of 1,000 mm. It has a swing over bed of 580 mm and a maximum workpiece weight of 250 kg. If you are looking to get high-quality turning capabilities, consider the Okuma LB3000EXII machine we have for sale. Contact us for further details. Capacities • Swing over bed: 580 mm • Swing over longitudinal carriage: 470 mm • Distance between spindle centers: 1,020 mm • Max turning diameter: 340 mm • Max turning length: 1,000 mm • Max workpiece weight between centers: 250 kgMain spindle • Spindle diameter: 120 mm • Spindle nose: JIS A2-6 (optional JIS A2-8) • Spindle bore: 80 mmAxes • Z rapid: 30,000 mm/min • X rapid: 25,000 mm/min • Feed range X/Z: 0.001–1,000 mm/revTurret Fpodpfx Asz Ni D Tsl Uon • Type: V12 • Tool stations: 12 • Suitable for turning or driven tools (L- or M-tools) • External tool size: 25 × 25 mm • Internal tool size: Ø40 mmDriven tools / C-axis • Driven-tool speed: 45–6,000 rpm • C-axis range: 360° • C-axis indexing increment: 0.001° • C-axis rapid speed: 200 rpmTailstock • Taper: MT No. 5 • Travel: 1,015 mm • Motor: 2.9 kWElectrical / auxiliary • Hydraulic unit pump: 2.2 kW • Lubrication pump: 0.018 kW • Coolant pump: 0.25 kW (side chip discharge) / 0.8 kW (rear chip discharge) • Supply voltage (manual): 200 V • Transformer voltages: 220 / 240 / 380 / 415 / 440 / 480 V • Frequency: 50/60 Hz • Electrical cabinet protection: IEC IP54 Technical Specification Counter Spindle No Driven Tools Yes

Condition: like new (used), Year of construction: 2015, operating hours: 500 h, functionality: fully functional, * Okuma Millac 852V II / 50. * Machine in excellent condition with very few cutting hours. * High metal removal rate machine. * Box guideways on all axes. * Quadruple box guideway system on the Y-axis. * Extremely rigid structure. * Oil-fed guideway lubrication system with automatic machine stop. * Renishaw tool probe. * BT 50 spindle taper. * High-torque 18.5 kW motor. * Cutting torque: 580 Nm. * Chip evacuation capacity: 540 cm³/min. * Okuma IGF OSP300 automatic conversational programming system. * Automatic force control and tool usage monitoring. * Parametric automatic tool anti-collision system. * Communication ports: USB, PCMCIA card, and RS-232. * Tool life management and usage tracking. * Automatic control of torque and tool stress. * Table dimensions: 2,200 x 850 mm. * Maximum load capacity: 2,500 kg. * Spindle speed: 6,000 rpm. * X-axis travel: 2,050 mm. * Y-axis travel: 850 mm. * Z-axis travel: 750 mm. * Spindle oil cooler. * Rapid traverse speed: 20,000 mm/min. * 36-tool magazine. * Tool change time: 0.5 seconds. * Chip-to-chip time: 5 seconds. * Independent Knoll coolant system (70 bar pressure). * 30-micron particulate filter system. * LTA mist filtration system. * Rear-mounted hinge-type chip conveyors. * Machine currently in production. * Inspectable by a qualified official Okuma technician. * Condition: Like new. Fodez Nc Rlopfx Al Uspn * Extensive BT 50 tooling/holder package. * Includes electrical transformer, documentation, parts list, electrical schematics, and programming/operation manuals. * Machine weight: 20,500 kg. * Immediate delivery available (subject to prior sale).