Used Doosan for sale (305)

Condition: excellent (used), Year of construction: 2019, Doosan Puma TT2100SYY Mfd. 2019 Tooled as pictured Specifications SWING OVER BED 9.05" MAX CUTTING DIAMETER 9.05" DISTANCE BETWEEN CENTERS 38.5" X-AXIS TRAVEL 6.5" Y-AXIS Yes Y-AXIS TRAVEL 3.93" Z-AXIS TRAVEL 27.5" C-AXIS INDEXING FULL CONTOURING C-AXIS CHUCK SIZE 8" BAR CAPACITY 2.625" SPINDLE NOSE A2-6 SPINDLE MOTOR 35 hp SPINDLE SPEED 5,000 RPM RAPID TRAVERSE RATE - X-AXIS 1,181 in/min. RAPID TRAVERSE RATE - Z-AXIS 1,575 in/min. SUB SPINDLE Yes SUB SPINDLE - CHUCK SIZE 8" SUB SPINDLE - BAR CAPACITY 2.56" SUB SPINDLE - SPINDLE NOSE A2-6 SUB SPINDLE - SPINDLE MOTOR 25 hp SUB SPINDLE - SPINDLE SPEED 5,000 RPM SUB SPINDLE / W-AXIS TRAVEL 28.7" TURRET CAPACITY 12 TURRET TYPE BMT55 LIVE MILLING Yes LIVE MILLING SPEED 5,000 RPM LIVE MILLING MOTOR 10 hp TURRET 2 CAPACITY 12 TURRET 2 - X-AXIS TRAVEL 6.5" TURRET 2 - Z-AXIS TRAVEL 27.56" Dimensions 93" X 153" (W/CONVEYOR - 186") X 88.6"H Weight 20,940 LBS Equipped With FANUC OiTF CNC CONTROL DOOSAN EZ GUIDE i PROGRAMMING TWIN 12 POSITION TURRETS UPPER AND LOWER, W/24 POSITION INDEXING ON EACH TURRET WITH BASE MOUNT TOOLING SYSTEM Y-AXIS ON BOTH TURRETS (2) INTEGRAL SPINDLES FULL CONTOURING C-AXES ON BOTH SPINDLE MILL/DRILL ON UPPER AND LOWER TURRETS Gsdpfxjw Dvnxj Afnobh PARTS CATCHER LEFT AND RIGHT PROGRAMMABLE PARTS UNLOADER PARTS CONVEYOR BAR FEED INTERFACE 8" 3-JAW KITAGAWA CHUCK FOR LEFT AND RIGHT SPINDLES (COLLET SYSTEMS IN ON MACHINE NOT INCLUDED IN SALE) (2) X-AXIS LIVE HOLDERS (2) Z-AXIS LIVE HOLDERS STANDARD FACTORY STATIC TOOLING DOOSAN TOOL LOAD MONITORING SYSTEM AIR BLAST SYSTEM FOR CHUCK CLEANING 2 machines available

Condition: good (used), Year of construction: 2006, control FANUC 21i-TB Control x-axis 390 mm z-axis 780 mm Gjdpfx Afjvzln Renjbh spindle taper A2-11 number of spindle speeds 2000rpm engine output 37 kW weight of the machine ca. 9000 kg dimensions of the machine ca. 1905,0 × 2720,0 × 3260,0 m The machine has chucks that can produce gears from 100 to 500 mm. Special chuck is available

Condition: good (used), Year of construction: 2010, Maximum turning diameter 406mm, Maximum turning length 520mm, bar capacity 65mm, Y axis -/+ 51mm, Spindle speed, 4,500 rpm, sub-spindle speed 4,500 rpm, milling speed 5,000rpm, Gbodpfjyizllex Afnsh 12 station turret, 18.5 kw main motor, C axis 0.001degrees, Fanuc I series control, parts catcher, tool setter, swarf conveyor, 3 jaw chucks to main and sub spindles, magazine barfeed

Condition: like new (used), Year of construction: 2024, Table size 1630 x 760 mm, table load 1500 kgs, Traverses XYZ 1630 x 762 x 650 mm, rapid feedrates 30m/min, Spindle power 18.5 Kw, spindle speed 12,000rpm, Gbodpfx Afsyia Upsnoh 30 station ATC, spindle taper BT40, through spindle coolant, swarf conveyor, Fanuc i series control.

Condition: like new (used), Year of construction: 2024, Traverses XYZ: 625 x 450 x 400mm, 500 x 450mm diameter table, max table weight 400kg, maximum workpiece size 550mm dimeter x 450mm high, B axis table tilt +30°, -110°, C axis 360degrees, Gbedpeyia T Sjfx Afnoh 18.5kW, 12000rpm, BT40, 24 pallets 120 station tool changer, Fanuc I series control, swarf conveyor,

Condition: excellent (used), power: 103 kW (140.04 HP), fuel type: diesel, color: orange, Year of construction: 2023, operating hours: 244 h, Equipment: air conditioning, Drivetrain AdBlue system: Yes Drive: Wheel Make of engine: DL06V Weights Empty weight: 18.500 kg Functional CE mark: yes Gsdpfsyibdxjx Afnebh Condition Technical condition: very good Visual appearance: very good Identification Serial number: DHKCEWCXCP5002429 Other information Front tyres / undercarriage remaining: 80 Rear tyres remaining : 80 Tyre brand: Aeolus Emission level: Stage V / Tier IV final Delivery terms: EXW Transport dimensions (LxWxH): 8,04x2,5x2,85 Production country: KR Additional information Please contact Jeroen Heindryckx, Bart Apers or Matthias Eyckmans for more information

Condition: new, power: 116 kW (157.72 HP), fuel type: diesel, color: orange, Year of construction: 2025, operating hours: 10 h, Equipment: air conditioning, Technical information Track width: 60 cm Empty weight: 22.200 kg Make of engine: DL06A Functional Bucket capacity: 0,92 m³ Condition General condition: very good Technical condition: very good Visual appearance: very good Other information Emission level: Stage IIIA / Tier III Gbsdpfjyibbkjx Afneh Delivery terms: EXW Transport dimensions (LxWxH): 9,5x3x3,2 Production country: KR Additional information Please contact Jeroen Heindryckx, Bart Apers or Matthias Eyckmans for more information CE marked - No CE Certificate available

Condition: used, Year of construction: 2018, operating hours: 18,042 h, Type of fuel: Diesel Empty weight: 13.225 kg Dimensions (LxBxH): 400 x 223 x 395 cm Lifting capacity: 9.000 kg Lift height: 510 cm Fork dimensions: 2.200 x 2.240 mm - Year: 2018 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: FDB0X-2520-00262 - Operating hours: 18042 - Lifting capacity: 9000kg - Lifting height: 5100mm - Overhead clearance: 3950mm - Free lift: 0mm Gbjdpfx Ajx I Np Rjfnoh - Fork length: 2200mm - Maximum fork width: 2240mm - Minimum fork width: 530mm - Number of wheels: 6 Wheels - Attachment: Side-shift, Fork positioner - Options: Work lights, Radio, Camera, Full cabin, Heating - Mast: Duplex - Drive: Diesel - Motor brand: Doosan - Transport dimensions: 4000mm x 2230mm x 3950mm (l x w x h) - Transport weight [kg]: 13225kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Tess van den Boom

Condition: ready for operation (used), Year of construction: 2007, spindle speed (max.): 1,800 rpm, travel distance X-axis: 470 mm, travel distance Z-axis: 3,250 mm, spindle motor power: 75,000 W, overall weight: 21,500 kg, number of axes: 3, This 3s DOOSAN PUMA 600LM was manufactured in 2007. It features a 45° inclined cast-iron bed and prismatic guideways with Rulon 142 antifriction material. The spindle offers a speed range of 15 – 1,800 rpm and a maximum torque of 9,025 Nm. With a bar capacity of 152 mm and continuous C-axis rotation, consider the opportunity to buy this DOOSAN PUMA 600LM horizontal turning machine. Contact us for further details. • Guideways: Prismatic with Rulon 142 antifriction material • Spindle: • Nose: ASA A2-15 • Maximum torque: 7,220 / 9,025 Nm Gedpfx Afsyi Uwbsnjbh • Bar capacity: 152 mm • C-axis: continuous interpolated, 0.001° resolution • Axes: • Number of axes: 3 (X, Z, C) • C-axis rotation: ±360° continuous • Feeds: • Rapid feed X-axis: 12 m/min • Rapid feed Z-axis: 10 m/min • Maximum interpolated feed: 500 mm/rev • Ball screws diameter: Ø 50 / 63 mm

Condition: ready for operation (used), Year of construction: 2011, operating hours: 5,477 h, spindle speed (max.): 3,500 rpm, total height: 1,863 mm, overall weight: 6,000 kg, controller manufacturer: FANUC, controller model: I series, number of axes: 3, This 3-axis DOOSAN Puma 2600M was manufactured in 2011. A robust horizontal turning machine featuring a Fanuc I Series control system, it offers a maximum turning diameter of 376 mm and a length of 760 mm. Spindle speed reaches up to 3,500 rpm. Includes chip conveyor, tool holders, and driven tools. If you are looking to get high-quality turning capabilities consider the DOOSAN Puma 2600M machine we have for tact us for more information. Additional equipment • Tool holders • 2+2 driven tools • Automatic tool measurement • Oil catcher • Oil mist filter (Losma) Machine Benefits Technical Machine Benefits • Maximum turning diameter: 376 mm • Maximum turning length: 760 mm • Maximum spindle speed: 3500 rpm Extra Information Gbedjx D N Naspfx Afnjh Machine still under power Dimensions Machine Depth 4600 mm

Condition: good (used), Year of construction: 2014, Traverses X Y Z; 762 x 516 570mm, Table size 860 x 570mm, Table load 350 kgs, spindle power 18.5Kw, spindle speed 10,000 rpm, spindle taper BT40, 30 station ATC, Fanuc I control, through spindle coolant, swarf conveyor. Gsdjygkpnopfx Afnjbh

Condition: excellent (used), Year of construction: 2021, Traverses XYZ: 625 x 450 x 400mm, 500 x 450mm diameter table, max table weight 400kg, maximum workpiece size 550mm dimeter x 450mm high, B axis table tilt +30°, -110°, C axis 360degrees, Gbodpsygibiofx Afnsh 18.5kW, 12000rpm, BT40, 30 station tool changer, Fanuc I series control, swarf conveyor,

Condition: excellent (used), Year of construction: 2021, Traverses X Y Z; 1050 x 570 x 510mm, Table size 1300 x 570mm, min-max height spindle to table 150-660mm, spindle speed 12,000rpm, Gjdpfx Afoygh U Usnsbh 30 station ATC spindle taper BT40, spindle power 18.5 kW, Fanuc control, coolant, swarf conveyor and probe.

Condition: used, power: 127 kW (172.67 HP), lifting height: 2,750 mm, Year of construction: 2015, operating hours: 6,730 h, Year of manufacture: 2015 Empty weight: 14.400 kg Dimensions (LxBxH): 772 x 264 x 328 cm Gbsdpfx Afjx Hgqisneh Engine type: Doosan Doosan DL06K Tier IIIB Bucket volume: 2.5 m^3

Condition: used, fuel type: electric, lifting height: 4,800 mm, Year of construction: 2014, operating hours: 6,250 h, Year of manufacture: 2014 Empty weight: 23.500 kg Carrying capacity: 1.800 kg GVW: 25.300 kg Dimensions (LxBxH): 898 x 299 x 308 cm Track width: 60 cm Gbedpfx Aox Hgrajfnoh Digging depth: 10.795 m

Condition: ready for operation (used), Year of construction: 2018, travel distance X-axis: 1,630 mm, travel distance Y-axis: 762 mm, travel distance Z-axis: 650 mm, controller manufacturer: SIEMENS, controller model: 828D, total height: 3,170 mm, overall weight: 13,500 kg, spindle speed (max.): 12,000 rpm, number of axes: 3, This 3-axis DOOSAN DNM 750 II was manufactured in 2018, featuring a robust vertical machining centre design. It boasts a large X-axis movement of 1630mm, Y-axis of 762mm, and Z-axis of 650mm. Equipped with a high-speed spindle at 12,000 RPM and a BT40 toolholder, it includes an ATC with 30 positions. Consider the opportunity to buy this DOOSAN DNM 750 II vertical machining centre. Contact us for more information about this machine. Gbedpfx Afjx D R I Rsnoh • Distance between table and spindle nose: 150–800 mm • ATC: 30 positions Dimensions Machine Depth 3850 mm

Condition: like new (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 850 mm, nominal power (apparent): 61 kVA, torque: 1,675 Nm, controller manufacturer: FANUC, controller model: 18iMB, workpiece weight (max.): 1,200 kg, table width: 630 mm, table length: 630 mm, spindle speed (max.): 6,000 rpm, distance table to spindle center: 875 mm, distance table center to spindle nose: 1,000 mm, spindle nose: ISO #50 7/24 Taper, number of spindles: 1, number of slots in tool magazine: 40, ACE-HM630 – Specifications Travel X-axis (table longitudinal travel): 1,000 mm Y-axis (head vertical travel): 800 mm Z-axis (column cross travel): 850 mm Distance from spindle center to pallet top: 75–875 mm Distance from spindle nose to table center: 150–1,000 mm Table Pallet type: 24-M16 × P2.0 Tap Indexing degree: 0.001° Gedpfx Afex Ad Nlonsbh Table loading capacity: 1,200 kg Pallet size: 630 × 630 mm Spindle Max spindle speed: 6,000 rpm Spindle taper: ISO #50 7/24 Taper Max spindle torque: 1,675.8 N·m Feedrate Rapid traverse (X/Y/Z): 24 m/min Cutting feedrate: 1–12,000 mm/min Automatic Tool Changer Tool shank: MAS 403 BT50 (DIN, CAT) Tool storage capacity: 40 Max tool diameter: 135 mm Max tool diameter (without adjacent tools): 250 mm Max tool length: 400 mm Max tool weight: 25 kg Max tool moment: 34.3 N·m Tool selection method: Fixed address Tool changing time (tool-to-tool): 2.5 sec Tool changing time (chip-to-chip): 8.5 sec Automatic Pallet Changer Number of pallets: 2 Type: Rotary Pallet change time: 25 sec Pallet rotation in loading station: 90° index Power Source Electrical power supply (rated capacity): 60.7 kVA Compressed air supply: 0.54 MPa Tank Capacity Coolant tank: 550 L Lubrication tank: 4.3 L Machine Size Machine height: 3,041 mm Machine dimensions (L × W): 6,485 × 3,857 mm Machine weight: 18,000 kg

Condition: used, Year of construction: 2019, travel -x axis 1.525 mm travel -y axis 770 mm travel -z axis 625 mm control HEIDENHAIN - TNC620 table dimension (L x W) 1.600 x 750 mm numbers of positions in the tool changer 24 tool taper SK50 Milling machining centers - vertical | DOOSAN - MYNX 7500/50 II equipped with 24-way tool changer, ITC cooling system and chip conveyor. The machine only has 3.165h spindle hours. The machine is in a well-maintained condition. The machine video from the production plant will be shared on request. Gsdpfsyhrbuox Afnebh - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: MYNX7500/50II | MYNX 7500 | MYNX7500 | MYNX-7500 | MYNX750050II

Condition: used, Doosan Model S 550L CNC Lathe Control Fanuc 21T Swing over bed 710.0 mm Max turning dia 550.0 mm Max turning length 1130.0 mm Chuck dia 400.0 mm Spindle bore 102.0 mm Spindle nose 6 mt Spindle speed 30 – 2500 rpm Gbodjyka Syspfx Afnsh Spindle motor power 22 kw Turret 12 stations, Feeds 0.001 – 133 mm/rev Rapid X 20m/min Z 24m/min Bar capacity 90.0 mm Tailstock Swarf conveyor Manuals

Condition: excellent (used), Year of construction: 2014, Doosan VC510 Twin Pallet CNC Vertical Machining Centre with Doosan Fanuc I Series CNC Control Gbedpfxoyif A Es Afnjh Pallet Dimension (2) 860 x 570mm. Maximum Workpiece Height 520mm. Maximum Pallet Load 350kg. Axis Travel 'X'=762mm, 'Y'=516mm, 'Z'=570mm. Distance From Spindle Nose To Table Top 210-780mm. Distance From Spindle Centre To Column Guideway 530mm. Rapid Traverse 'X'=40m/min, 'Y'=40m/min, 'Z'=32m/min. Cutting Feedrate 16,000mm/min. Maximum Spindle Speed 10,000rpm (18.5kW Motor). BT40 Spindle Taper. 40 Position ATC. S/No. MV0061-000288. Description With LNS Turbo HB Swarf Conveyor, Pumps and Equipment WPB10-1000 Hydrajet High Pressure Coolant System, Kaukan Chiller Unit, Filtermist FX4002 Mist Extraction Unit, Signal Tower, Handwheel & Quantity Of Assorted BT40 Back End Spindle Tools. Overall Dimensions L3,260 x W2,671 x H3,250mm. Machine Weight 9,200kg. Please Note: Issue On Spindle Assembly, Repair Not Completed.

Condition: used, Year of construction: 2013, 370mm max. machining diameter, 651mm swing over bed, 461mm swing over cross-slide, Gbjdpfx Afsyffz Njneh 712mm max turned length, 3500rpm spindle, 76mm bar capacity, 12 station turret, 15kW spindle motor, FANUC Oi control, collet chuck , C axis & Milling, Tool presetter, Tailstock, coolant, swarf conveyor, parts catcher.

Condition: used, Year of construction: 2018, travel -x axis 1.050 mm travel -y axis 570 mm travel -z axis 510 mm control HEIDENHAIN - TNC620 number of spindle speeds 12.000 U/min Gedpfxsw Dgcao Afnebh tool taper BT 40 table dimension (L x W) 1300 x 570 mm numbers of positions in the tool changer 30 Milling machining centers - vertical | DOOSAN - DNM 5700 equipped with 30-way tool changer, ITC cooling system and chip conveyor. The machine only has 13.600 spindle hours. The machine is in a well-maintained condition and has exclusively worked on Aluminum and Plastics. The machine video from the production plant will be shared on request. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: DNM5700 | DNM-5700

Condition: used, Year of construction: 2017, operating hours: 6,270 h, Year of manufacture: 2017 Gbodpfsttzmnox Afneh Empty weight: 23.500 kg Dimensions (LxBxH): 898 x 299 x 308 cm Track width: 60 cm Digging depth: 10.795 m

Condition: used, Year of construction: 2017, operating hours: 7,870 h, Year of manufacture: 2017 Gbsdpfx Afjx Hgtwjnsh

Condition: ready for operation (used), Year of construction: 2019, spindle speed (max.): 2,000 rpm, travel distance X-axis: 352 mm, travel distance Z-axis: 1,105 mm, spindle motor power: 35,000 W, controller manufacturer: FANUC, number of axes: 2, This DOOSAN PUMA 4100 B horizontal turning machine was manufactured in 2019. It features a maximum turning diameter of 550 mm and a maximum turning length of 1,042 mm. With a spindle speed of 2,000 rpm and 10 tool stations, it offers efficient machining capabilities. If you are looking to get high-quality turning capabilities, consider the DOOSAN PUMA 4100 B machine we have for sale. Contact us for further details. • Swing over bed: 790 mm • Swing over carriage: 590 mm • Recommended turning diameter: 380 mm • Maximum turning diameter: 550 mm • Maximum turning length: 1,042 mm • Bar diameter: 116.5 mm • Spindle nose: ASA A2#11 • Front spindle bearing diameter: 180 mm Gedpfxeyhdbgs Afnsbh • Spindle bore diameter: 132 mm • Number of tool stations: 10 • Maximum tool size (external): 32 x 32 mm • Boring bar diameter: 60 mm • Indexing time: 0.25 sec • Rapid feed X-axis: 16 m/min • Rapid feed Z-axis: 20 m/min • Quill diameter: 120 mm • Motorized quill bore taper: MT#6 • Quill travel: 120 mm