Used Rima for sale (123)

Condition: used, Year of construction: 2001, Built in 2001 Iiodpfxoc Idi Re Abvsc Size max 320 x 250 mm min 260 x 180 mm Pile height max 330 mm min 80 mm Infeed height max 890 mm min 860 mm Speed max 900 Pack./h

Condition: ready for operation (used), Year of construction: 2011, Built in 2011 Iedpsd N D Npefx Abvoic

Condition: good (used), Year of construction: 2016, Built in: 2016 Length: 1,600 mm Iiedpfx Asu R Rynjbvec Width: 1,000mm Height: 2,200 mm

Year of construction: 2004, condition: good (used), Year of Construction: 2004 Description: Transforms the shingled stream behind a web press into counted and compensated stacks for further processing or distribution. No. of products per layer / stack are easily programmable. Details as shown below. Speed: 90.000 cph (product permitting) min format product (head/foot x spine): 102 mm x 145 mm (4.00" x 5.75") max format product (head/foot x spine): 320 mm x 500 mm (12.63" x 19.68") max pagination: 48p Product orientation: Spine leading Low Infeed Infeed height (min/max in mm): 600-1200 mm Waste gate Stream Aligner / Jogger Single squeeze roller Laser Counter, model: Baumer Scatec-1 Upper bin height in mm: 210 mm Upper Bin with 3 forks Turntable with compression plates max Stack height in mm: 330 mm Servo turntable Pneumatic pusher Delivery Direction to the right Delivery height in mm: 876 mm (34.50“) Air Delivery Table included Over all length equipment: 2650-2950 mm Isdpfxjh Ir E Ej Abvoic Over all width equipment: ~700 mm Over all height equipment: ~1800-1950 mm Input Power: 3 kVA, 50/60 Hz, 3 ~ Air requirement: 170 l/min 5.5 bar (6 cfm 80 psi) Weight: 945 kg (2100 lb) Equipment at Helmstedt, airports: Hannover (~1 hr), Berlin (~2 hrs) Mechanical / electrical machine test possible Condition: cleaned & in working conditions

Year of construction: 2006, condition: good (used), Build in: 2002 - Speed: up to 100.000 cph / 80 m/min (product permitting) - min width product: 101 mm - max width product: 530 mm - min length product: 114 mm - max height / thickness / pagination product: 2-64p(96p) - product permitting - infeed stream lap: ~25-100 mm - min width product: ~3 mm - max width product: ~50 mm - min product width after trim: ~95 mm - Trimmming line with 1st trimmer - right bump turn - 2nd trimmer - Infeed/delivery height: probably ~600 mm >>TBC - Trimming line - 1st trimmer knife left & right - Trimming line - 2nd trimmer knife right - To be used with carbide ring knives - Optional equipment: additional RS 220 bump turn, REF 25981.01, S/N 220-1137 - Over all length equipment: ~3500 mm - Over all width equipment: ~3000 mm - Over all height equipment: ~1181 mm ( infeed height~800 mm) - Input Power: ~13 kW - Voltage: 400 V, 3 Ph, N, PE, 50 Hz - Air requirement: practically no air requirement - Suction capacity per nozzle: 900 m3/h, air speed 31m/s - Weight: ~800 kg Iodpfeh Itu Eex Abveic - Color: RAL 7035, light grey - Equipment at central warehouse Helmstedt with nearest airports: Hannover (~1 hr), - Mechanical / electrical machine test possible - Description: Right hand trimming line with 2 trimmers and a bump turn in between. For 3-side trim of products in a shingled stream. - Condition: cleaned & in working conditions - Machine available: upon request

Condition: good (used), Year of construction: 2008, Refurbished: 2008 Format: max 320 x 470 mm; min 133 x 152 mm Product thickness: max 96 pages 57 g/m² mm Iiedpfx Aboqpgmcovjc Stack height pre-stack basket: 127 mm Total stack height: 330 mm Infeed height: 470 - 1,146 mm Outfeed height: 876 mm Output: max 100,000 copies/h Equipment - Inlet with discharge - Double press - Infrared counter - Outfeed left - Outfeed conveyor

Condition: good (used), Year of construction: 2003, Year of construction 2003 Size: max. 320 x 320 mm min. 133 x 152 mm Pile height: Iedpju R Ulbefx Abvjic Max. 330 mm Speed: max: max. 100,000 ex./h

Condition: good (used), Year of construction: 2007, Machine number: 338552-10 Iijdpsu R I Eujfx Abvjc Built in: 2007 Size: max 320 x 470x 64 mm; min 102 x 152 x 7 mm Pile height pre-loading cage: 127 mm Pile height total stack: 330 mm Infeed height: 660 - 1.016 mm Speed: 15.000 c/h

Year of construction: 1993, condition: used, Size max 470 x 320 mm Size 152 x 127 mm Speed max 18.000 c/h Isdpfx Ajc Rntnebveic Pile height 235 mm Pile height pre-loading cage 124 mm

Year of construction: 2001, condition: ready for operation (used), Built in 2001 Isdpfsdyky Tsx Abveic Size min 102 x 152 x 7 mm max 320 x 470 x 64 mm Speed max up to 15.000 Prod./h Table height 876 mm

Condition: used, Size max 470 x 320 mm Weight 520 kg (approx.) Speed max 18.000 c/h Equipment • - special: post code identification Iiodpfxjdrhpfo Abvjc

Year of construction: 1998, condition: ready for operation (used), Built in 1998 Size min 102 x 152 x 7 mm Iodpfx Asdykhmobvsic max 320 x 470 x 64 mm Speed max up to 15.000 Prod./h Table height 876 mm

Condition: new, functionality: unexamined, Year of construction: 2024, machine/vehicle number: 16.41-PS0382, control type: CNC control, degree of automation: automatic, actuation type: electric, sheet thickness (max.): 8 mm, input voltage: 400 V, input current: 20 A, type of input current: three-phase, 2024 Pima Power PS 1225 Brand new Complete machine. Machine was tipped on its side during transit and was damaged. Machine is stored in Our warehouse in California USA. Contact to set up in person inspection. Iijdpfow Nbh Hsx Abvsc

Condition: ready for operation (used), Year of construction: 2012, laser power: 3,000 W, overall weight: 12,000 kg, total height: 3,200 mm, number of axes: 5, This 5-axis Prima Power Rapido was manufactured in 2012, featuring a cutting area of 4080 mm (X) × 1530 mm (Y) × 765 mm (Z) and a laser power of 3000 W. It handles 3D sheet metal parts efficiently with speeds up to 60 m/min. Ideal for automotive and aerospace applications. If you are looking to get high-quality cutting capabilities consider the Prima Power Rapido machine we have for sale. Contact us for more information. Machine Benefits Technical Machine Benefits • Cutting area: 4080 mm (x) × 1530 mm (y) × 765 mm (z) Iiodpfxjx D Efko Abvec • Axis speed: up to 60 m/min (x/y) • Repeatability: ±0. 05 mm • Applications: automotive, aerospace, metal forming industries • Workpiece type: 3d sheet metal parts, tubes, formed parts • Cutting capabilities: steel, stainless steel, aluminum, and other metals Extra Information Machine still under power Dimensions Machine Depth 9000 mm

Condition: new, Year of construction: 2026, functionality: fully functional, power: 15 kW (20.39 HP), cutting height (max.): 175 mm, cutting width (max.): 2,120 mm, saw blade diameter: 550 mm, overall weight: 2,500 kg, cutting length (max.): 6,200 mm, We sell: JRIMAC STANDARD rip saw -NEW- - Cutting length: 6.200mm - Cutting width: 420 - 2.120 mm - Motor power: 11/15 kW - Cutting height: 175 mm - Precise, clean cut - Cutting accuracy +/- 0.5 mm - Hold-down device with extremely strong blade guard and suction connection - SPS machine control - Stepless, frequency-controlled, powerful feed motor - Convenient semi-automatic saw blade height adjustment - Stepless width stop adjustment - JRIMAC" saw blade quick clamping system Iijdpjdndvkjfx Abvoc - Front table support made of plastic or solid wood - Forced-guided riving knife - Lower standard extraction channel installed ready for connection - CE-compliant, dust-tested - Processing of more than 12 different materials possible - Reliable spare parts and customer service

Condition: new, Year of construction: 2026, functionality: fully functional, power: 15 kW (20.39 HP), cutting height (max.): 210 mm, cutting width (max.): 3,000 mm, saw blade diameter: 550 mm, height adjustment type: electric, overall weight: 2,800 kg, cutting length (max.): 11,200 mm, We sell: JRIMAC rip saw/multifunction saw MULTICUT -NEW- - Precise and clean cut - Cutting direction left - right/ right - left - Flexible and efficient working - Air cushion table for comfortable processing of panels - 90° stop ruler for cross-cuts - Clamping jaws for optimum processing of sheet material Iijdpfjrdh Tkex Abvoc - Forced-guided pneumatic hold-down device with zero cut device - Various options for triggering the cut - Convenient, fully automatic saw blade height adjustment - Stepless adjustment of the width stop - Electronic positioning control - Saw blade quick clamping system "JRIMAC" - High work safety - User-friendly - Cutting accuracy +/- 0.5 mm

Condition: new, Year of construction: 2026, functionality: fully functional, cutting height (max.): 210 mm, cutting width (max.): 2,120 mm, saw blade diameter: 550 mm, height adjustment type: electric, total length: 11,000 mm, overall weight: 2,500 kg, cutting length (max.): 9,200 mm, saw drive: 15,000 W, JRIMAC rip saw "TOP" - NEW - - Cutting length 2200 - 9200 mm - Cutting width 420 - 2120 mm - Cutting direction left - right (right - left on request) - Cutting height max. 210 mm with high-quality saw blade Ø 620 mm. - Precise and clean cut due to strong, self-supporting welded construction of the machine stand. - Carriage guidance via linear guides, with ball-bearing mounted, maintenance-free rollers. - Safety beam mounted above the machine table with 6 mm thick lamella protection. - Extraction connection Ø 160 mm installed at table height at top right and bottom left ready for connection. - Flexible and efficient working thanks to 250 mm opening of the slat guard above the top edge of the table. - Infinitely variable, frequency-controlled, powerful feed of the carriage. - The maximum feed speed can be adjusted. - Automatic stepless saw blade height adjustment. - Infinitely variable width stop adjustment via several operating levers. - Electronic positioning control. - JRIMAC" saw blade quick clamping system allows quick saw blade changes. - Cut release as standard (small mobile foot pedal). Iiodpfxegk Nvns Abvjc - Front table supports made of wood, plastic or Pertinax coating. - High work safety. - Only high-quality components are used and installed. - The electrical control cabinet is easily accessible at the front of the machine. - The machine electrics are designed for 230/400 volts, 50 Hz. - BG dust-tested - EC type-tested in accordance with Directive 2006/42/EC - Forcibly guided splitting wedge - Processing of more than 12 different materials possible - Reliable spare parts and customer service

Condition: used, Year of construction: 2006, machine/vehicle number: -, functionality: fully functional, input current: 40 A, type of input current: AC, cutting height (max.): 140 mm, saw blade diameter: 450 mm, saw blade bore: 80 mm, total length: 6,500 mm, total width: 1,800 mm, total height: 2,100 mm, overall weight: 1,500 kg, drive type: 3 x 4 KW Motoren, operating pressure: 6 bar, compressed air connection: 6 bar, feed length X-axis: 800 mm, feed length Y-axis: 5,000 mm, main saw diameter: 450 mm, pressure: 6 bar, Equipment: saw blade guard, We are offering this used JRIMAC multi-blade saw, 2-blade version, manufactured in 2006, for sale. Iiedpszd Hcdefx Abvjc Machine type: Machine no.: 0060401 Rated voltage: 3/N/PE/400/230 V - 50 Hz Rated current: 40 A Power consumption: 20 kW Minimum tool diameter: 450 mm Operating pressure: 6 bar Year of manufacture: 2006 Weight: 1500 kg Length: 6500 mm Width: 1800 mm Table height: 900 mm Overall height: 2100 mm Cutting length: 5100 mm, electrically adjustable Cutting height: 140 mm, 3x Cutting depth: 800 mm, 3x If you have any questions or require further information, please feel free to send us a message or call us.

Condition: excellent (used), machine/vehicle number: M100037, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, tool diameter: 45 mm, spindle mount: MK 4, drilling depth: 250 mm, height adjustment type: mechanical, actuation type: mechanical, rotational speed (max.): 2,650 rpm, rotational speed (min.): 30 rpm, total width: 900 mm, total length: 1,900 mm, total height: 2,200 mm, table width: 760 mm, table length: 1,120 mm, overall weight: 1,800 kg, year of last overhaul: 2026, Equipment: CE marking, CARIMATI CTU 40/45 x 1000 radial drill press in excellent overall condition, fully functional machine, tested and ready for use. Key features: drilling capacity 45 mm Morse taper MK4 spindle speed 30 – 2650 rpm automatic feeds 0.05 – 0.3 mm/rev spindle stroke 250 mm table stroke on column 1000 mm power supply 400V three-phase complete with chuck, vise, and quick-change chuck column and head locking coolant system Iijdpszdqkljfx Abvsc machine complies with CE standards Transportation is the responsibility of the buyer. Loading onto the truck will be carried out by us. If customized/tailor-made packaging is required for transport, the related cost will be borne by the buyer. Machine sold as is, with no warranty.

Condition: used, Year of construction: 2015, working range: 550 mm, compressed air connection: 8 bar, type of input current: three-phase, overall weight: 5,000 kg, input current: 49 A, power: 25 kW (33.99 HP), We offer this used Störi Mantel UKS 850 pallet manufacturing machine, manufactured in 2015. Modification: OPTIM Date of manufacture: 11/2015 Serial number: 215 85 012 Maximum tool size: 550 mm Rated voltage: 3×400/50 V/Hz Rated current: 49 A Machine power consumption: 25 kW Air pressure: 0.8 MPa Total weight: 5000 kg Iiodpjzdkygjfx Abvsc If you have any questions or require further information, please do not hesitate to send us a message or contact us by phone.

Condition: good (used), Year of construction: 2011, functionality: fully functional, GERIMA Iiodpfx Abstmrkrevoc - The beveling machine is specifically engineered for high-precision processing on both linear and non-linear edges, with full adaptability to varying sheet thicknesses and geometries. -Featuring an advanced Trace Tracking System, it intelligently detects and follows complex part contours—ensuring accurate, consistent, and efficient beveling, even on intricate components.

Condition: excellent (used), Year of construction: 2011, Sheet metal format: 3000x1500 mm Iodpfx Abjxxkm Nsveic Axes X/Y/Z: 3065/1560/150 mm Price on request.

Condition: good (used), functionality: fully functional, Year of construction: 2018, Travel ranges: X/Y/Z: 3,048 x 1,524 x 150 mm Laser: CV-5000 (CO²) Operating hours: approx. 9,000 h Cutting head with lens: 5´ / 7.5´ / 9´ Control system: Prima Power NC Expressw e³ Laser Classic Pallet changer: Prima Power/OMS Sordella, max. 3,300 kg Extraction system: Donaldson 2DFP4-SPRK, 2,400 m³/h Cooling system: Hyfra Sigma 67-S Equipment: Sheet metal recognition, oil mist lubrication system, plasma monitoring, laser piercing monitor (LPM), pallet changer with light barriers, machine enclosure. Iiodpozbxn Uofx Abvec

Year of construction: 2005, condition: ready for operation (used), - USED - CO2 LASER CUTTING MACHINE WITH PALLET CHANGER X-AXIS TRAVEL: 3000 mm Y-AXIS TRAVEL: 1500 mm Z-AXIS TRAVEL: 150 mm WORKING AREA: 3000 x 1500 mm SOURCE: CP 4000 ; 4000 W CONTROL UNIT: PRIMACH 20L ACCESSORIES: FUME EXHAUSTER Iijdpfx Aoy T Sz Tsbvoc

Condition: used, total width: 1,000 mm, total length: 2,500 mm, total height: 2,150 mm, Colour: Grey Empty weight: 3.000 kg - Documentation available: No - CE certificate present: No Iiedpfxeytf Rye Abvoc - Serial number: 73101 - Drive system: Conventional - Power [kW]: 2.8 - X-axis travel [mm]: 1000 - Table length [mm]: 1700 - Table width [mm]: 770 - Drilling depth [mm]: 250 - Drilling capacity [mm]: 45 - Max. Reach [mm]: 1450 - Tool holder: MK5 - Min. spindle speed [rpm]: 60 - Max. spindle speed [rpm]: 2650 - Transport dimensions: 2500mm x 1000mm x 2150mm (l x w x h) - Transport weight [kg]: 3000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum