Used Ramm for sale (2,828)

Condition: good (used), Rung and miter punch, rung punch -Manufacturer: Rammefabriken, mechanical corner punch -Intermediate dimension: 100 mm -Adjustment depth: 65 mm Gksdpjif Hurofx Aftjf -Dimensions: 1700/600/H1080 mm -Weight: 118 kg

Condition: used, Year of construction: 1985, Equipment: all wheel drive, * Operating weight: 1360 kg * Year of manufacture: 1985 -----Subject to errors and prior sale Vehicle number 5594 Gedpfxekpl Nde Aftjkf

Condition: new, functionality: fully functional, Year of construction: 2025, Postmaster MINI – Hydraulic Vibrating Block The Postmaster Mini can be mounted directly onto a machine, ranging from 1.5 to 3 tons, and drives posts into the ground up to 150 mm. Oil supply required is 30-40 l/min. The Postmaster is faster, quieter, and safer than conventional machines on the market. A unique clamping system holds the post in position and vibrates it into the ground with minimal damage. Thanks to this vibrating action, the Postmaster can also be used to extract posts from the ground. Ideal for both wooden and steel posts and especially suitable for installing solar parks. • Faster • Safer • Quieter • Removes posts from the ground • Minimal ground disturbance • Firmly secured The Mini is the smallest unit in the range and weighs just 160 kg. Its compact design and light weight make it safe for use on smaller excavators without compromising stability. This unit is an ideal partner for short runs, limited access, and rapid repairs. Gjdpfx Afew R Uqkotskf Also available in Midi and Maxi versions. Optional CW 05 top plate.

Condition: ready for operation (used), Year of construction: 2011, operating hours: 685 h, Trench roller Ammann Rammax RW 1515 MIC, year of construction 2011, 685 operating hours, weight 1480 kg, radio control and cable control, service is done (oil, oil filter, both air filters), exhaust is self-made, Ser.Nr.50373, device is functional Gedpeqazzhsfx Aftskf

Condition: used, power: 20 kW (27.19 HP), operation weight: 2,100 kg, Year of construction: 1994, Rammax RW1800 SPT Soil Compactor Gsdpswhyw Sefx Aftjkf Year of manufacture 1994 2100 kg Hour meter defective 20 kW Kubota engine 4-way push blade Padfoot drum Blade width 110 cm Drum width 90 cm

Condition: new, functionality: fully functional, Year of construction: 2024, This powerful, hydraulic pile rammer from Maruzen is a good choice if you are looking for a strong machine for striking steel and wooden piles. The Maruzen KH193 comes standard without impact piece. Easy and fast to use Gjdpfxertqyds Aftokf As many as 1920 blows per minute Operates on hydraulic power source such as a power pack or earth mover Can be used in wet conditions, even underwater Minimal service required; lubricate head every 50 hours and service every 500 hours. Hydraulic powerhouse The KH193 pile rammer is a perfect choice when ramming steel pipes, for example 60 x 40 mm or ø 60 mm, but it is also suitable for wooden piles up to a diameter of 110 mm. It weighs 20 kg and is more powerful than our gasoline rammers. This type of pole rammer offers many possibilities: Maruzen's hydraulic powerpack is intended for mobile purposes and is known for its easy way to use. This powerpack UH070 is matched with the AY01H horizontal auger, the OH01 hydraulic one-man auger and the KH193 pile rammer from Maruzen. This type of powerpack offers many possibilities in: Assembly Fencing Foundation work Guardrail/boarding work Installing solar parks This hydraulic power pack is powered by a Honda GX200 gasoline engine and is delivered fully assembled, on a metal frame with large wheels. Benefits: Low fuel consumption; 1.6 Liters per hour at full power 20-25 Liters per minute Low noise level Light weight (40 Kg) Honda GX200 4 stroke engine (low emission) Very easy to use. EuroGate International offers affordable quality and service Maruzen is a reliable machine builder from Japan, for all kinds of hydraulic tools. The top brand offers excellent quality and service. Maruzen has been producing hydraulic machines since 1954.

Condition: new, functionality: fully functional, Year of construction: 2025, operating hours: 1 h, De KH800 palenrammer van Maruzen is een krachtige hydraulische palenrammer ontworpen voor zware toepassingen zoals het plaatsen van grote houten palen, stalen pijpen, en andere hekwerk- of fundatietoepassingen. Deze palenrammer kan hydraulisch worden aangedreven door zowel benzine- als dieselkrachtbronnen zoals een graafmachine of shovel. Gkedpfx Asurir Rjftof De KH800 is uitgerust met een standaard adapter voor 150 mm ronde palen, optionele adapters zijn beschikbaar voor vangrail en stalen H-profielen om de veelzijdigheid te vergroten. De palenrammer werkt met hydraulische kracht en heeft een aanbevolen oliespecificatie van ISO VG32 of ISO VG46. De maximale slangdikte varieert afhankelijk van de olieflow, waarbij 3/8″ en 1/2″ slangen worden gebruikt voor respectievelijk 20-25 l/min en 25-35 l/min. Deze palenrammer wordt wereldwijd gebruikt voor uiteenlopende toepassingen, zoals wegenonderhoud, water- en elektriciteitsvoorzieningen, en spoorwegonderhoud, wat zijn veelzijdigheid en robuustheid benadrukt. Wij bieden de KH800 aan inclusief de KHL800 Geleider. De geleider vereenvoudigd het werken met de KH800 palenrammer en is in hoogte instelbaar doormiddel van een lier. Waardoor alle palen even diep de grond in worden geslagen. Mocht u geintresseerd zijn in de KH800 zonder de geleider of heeft u andere vragen, neem dan contact op met onze verkoopafdeling voor de mogelijkheden.

Condition: used, color: other, Year of construction: 2015, operating hours: 900 h, Empty weight: 1.450 kg CE mark: yes Number of owners: 1 General condition: average Technical condition: average Visual appearance: average Gkodjx Dap Djpfx Aftof Production country: DE Please contact Jonas Francken for more information

Condition: new, Year of construction: 2025, Field of application: Construction General condition: very good Technical condition: very good Gkedpfx Aox Ezlxsftef Visual appearance: very good Fits to following machines: Pistons, Diaphragms, Seal Kits, Bushes, Chisels, Through Bolts.. Epiroc Atlas copco Rammer Soosan Daemo Indeco AJCE Komac Okada Furukawa Toku Konan Latest inspection: 2023-08-21 Please contact Ö. Inalkac for more information Please contact us for dealership! We can also supply spare parts for other Korean brands. All our breakers are CE marked and with 1 year warranty. Soosan, Daemo, Atlas, MSB, All-Kor, Rammer, OKB, JAB, MTB, Inan Makina, Toku....

Condition: used, Reis teaching pendant PHG 1 removed from Reis RI 16 Highspeed - removed from running machine - fully functional Gedoihdhiepfx Aftskf manufacturer: Reis Robotics type: PHG 10 manufacturer no.: 2140350 Dition: gebraucht

Condition: good (used), Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch Mr.: Simon Blank We offer you here a crash barrier for sale. The scope of delivery includes 01x crash barrier, used Total length: approx. 2,530 mm Clear width: approx. 2,350 mm Total height: approx. 600 mm Total depth: approx. 90 mm Consisting of each: 01x CS-Sigma profile, used Material color: sendz. galvanized Profile dimensions: C: 300 x 75 x 2 mm Weight / pc.: approx. 16.00 kg Clear width: approx. 2,300 mm 02x Post, used Material color: hot-dip galvanized Total height: approx. 600 mm Incl. 2 welded-on screw-on plates: approx. 200 x 100 mm Square profile: 90 x 90 mm Weight / piece: approx. 15.00 kg Base plate: approx. 200 x 200 x 10 mm Gedohncu Sspfx Aftekf Hole diameter: approx. 15 mm General information about the item: This item is only offered for collection. Any other desired transportation or a shipment of this article is associated with additional costs, which can be requested separately depending on the place of delivery or scope of delivery. Our services at a glance: (Prices on request) Assembly and installation Our general assembly conditions must be observed Shelf inspection Rack inspection in accordance with DIN EN 15635 carried out in accordance with the Requirements of BGR 234 Visual inspection for all racking systems Delivery with our own fleet of vehicles (without unloading)

Condition: used, Year of construction: 1991, CNC Vertical Milling Machine RAMBAUDI type RAMMATIC 600 Travel X 1260 mm Travel Y 690 mm Gjdpfx Aexxlr Tsftskf Travel Z 600 mm Numerical Command NUM 1060 Cone SA 50 Table size 2000 x 600 mm Year of construction 1991 Voltage 380 V Depth 2500 mm Total height 4000 mm Weight: approx 9 T

Condition: used, Year of construction: 1988, operating hours: 2,360 h, Equipment: soot filter, Ref. No.: B - 02 * O&K * RH 6 * Crawler chassis * with vibratory hammer * approx. 2360 operating hours * fully functional Trade-in possible Financing from 4.99% Subject to errors and prior sale! The information in this listing is non-binding descriptions and does not represent guaranteed characteristics. The seller assumes no liability for typographical or data transmission errors. Listed equipment should be checked separately. All information in the listings is non-binding! Delivery available throughout Germany upon request Opening hours: Monday to Thursday from 9:00 am to 5:00 pm, Friday from 9:00 am to 2:00 pm, and by appointment! Gkodpfxsxvf S Ij Aftjf

Condition: new, Telemecanique TSX TPE01 Prom Programmer, unused in original packaging, 100% functional, scope of delivery as per photos Gjdpfx Aexah T Aoftokf

Condition: ready for operation (used), CNC Bed Type Milling Machine Rambaudi Ram Mill 800 Table Size 3700x800 X travel 3000 Y travel 1000 Z Travel 800 CNC Selca 3045 4th axis Dia 400 with tail stock Gkedpfxjxddp Io Aftjf complete with tooling

Condition: excellent (used), Year of construction: 1998, year 1998 price POA stock no. 01988 specification HYDRAULIC CNC PROGRAMMABLE GUILLOTINE,WITH PROGRAMMABLE POWER OPERATED BACK GUAGE FRONT SUPPORTS AND SQUARING ARM- PNEUMATIC REAR SHEET SUPPORT SYSTEM description TYPE HYDRAULIC CNC CONTROL ELGO P8511 CUTTING LENGTH 3080 MAX SHEET THICKNESS M.S 6.5 MAX SHEET THICKNESS STAINLESS 4.5 Gjdpfx Aowybcmoftskf MAX SHEET THICKNESS ALUMINUM 10 BACKGUAGE RANGE 1000 PROGRAMMABLE STROKE VARIABLE WEIGHT 5000 KG MOTOR SIZE 9KW POWER REQ 32 AMP REAR GUARDING SYSTEM INTEGRATED

Condition: like new (used), Included in delivery: 01x Upright protector, second choice (new) Manufacturer: SSI Schäfer Suitable for frame profile type: P213, P215, P217 Material color: yellow Gksdpfxow I Dmps Aftsf Total height: 1,000 mm Total width: 130 mm Inner width: 122 mm Suitable for frame profile: 120 mm Total depth: approx. 65 mm Leg dimensions: 75 x 75 mm Material thickness: 4.00 mm Height of deflector: 50 mm Drill hole diameter: 9 mm Drill hole spacing: 250|300 mm Weight / unit: approx. 7.97 kg Number of drill holes: 08 pcs. Including fastening material consisting of: 08x Hexagon bolt M8x30 mm 08x Hexagon nut M8 16x Washer M8 General information about the item: This item is offered for collection only. If transportation or shipment of this item is desired, additional costs will apply, which can be quoted separately depending on delivery location and scope of supply.

Condition: new, Year of construction: 2025, For sale: the extremely robust pneumatic post drivers from Rhino Tool, USA. Previously sold on the European markets as RAKL, particularly in Germany. This indestructible machine is available in 4 models: PD55 25 kg PD110 50 kg PD140 63 kg Gkedpfx Aew R U Ehjftof PD200-5" 77 kg PD200-7" 80 kg All options such as special adapters/inserts, pneumatic centres, and grippers are available from stock.

Condition: ready for operation (used), Mitsubishi A6GPPE Programming Controller AV 220 V 50 HZ used 100% functional Gkedpfx Afei Eb Icetsf

Condition: excellent (used), The scope of delivery includes: 01x crash barriers, second choice Clear width: approx. 2,500 mm consisting of each: 01 x C - profile, used Material color: galvanized Profile dimensions: 300 x 85 x 28 x 15 mm Material thickness: 3.0 mm Length: 2,400 mm 02x L- collision protection corners, new Material color: yellow / black according to DIN standard Height: 400 mm Unit weight: 6.10 kg Outer width: 305 mm Side length: 170 x 170 mm Hole diameter: 15.5 mm Material thickness: 5 mm 08x screws: M12 08x nuts: M12 16x washers: M12 The crash barrier guardrail is supplied compl. delivered pre-assembled. Your contact persons in our company: Gkedpfx Aovir Hioftsf Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the article: This item is only offered for collection. Any other desired transportation or shipment of this item is subject to additional costs, which can be requested from us separately depending on the place of delivery or scope of delivery.

Condition: good (used), Here, we offer a Bosch Sigpack Systems with Manz AICO counterpart hand-held programming device. Bosch Sigpack Systems with Manz AICO counterpart hand-held programming device Bosch Sigpack Systems XR31-3 with Manz AICO pendant P51 hand programming device 80017134 Bosch Sigpack Systems Type: XR31-3 Manz handheld programming device Gkodpfx Afedqbbcotef Type: 80017134 Condition: pre-owned / used Scope of delivery: (See image) (Errors and omissions in the technical data, information are reserved!) We can answer questions on the phone for you. Written order possible by email or fax

Condition: used, This listing is for a Atas Optic 2 Programmable Injector GC Gjdpfsxzhrzox Aftokf

Condition: good (used), Programming cart KP-Qume QVT52 III consisting of: Mobile PC Type: KP-Qume QVT52 III Screen diagonal 14" (35,5 cm) Picture tube flat, white phosphor Screen display 24 lines / 80 or 132 characters / 1 status line / 1 user line Gksdsivd Eaepfx Aftjf Character display - 80 characters: 14 x15 matrix in a 16 x 16 cell or 14 x 12 matrix in a 16 x 13 cell - 132 characters: 7 x15 matrix in a 10 x 16 cell or 7 x 12 matrix in a 10 x 13 cell Frame rate depending on character display: 78, 70 or 65 Hz Character sets 96 ASCII characters, 7Bit ISO. In QVT119+ emulation: IBM code page 437/850 Screen saver yes, adjustable times Memory depending on emulation 4 or 7 screen pages Keyboard New ASCII (N.A.), different languages, 20 + 1 function keys programmable Emulations Qume QVT 101+/119+, Wyse WY30//50, TeleVideo TVI 910+/925/905, ADDS A2, ADM 5, ADD ENH, HZ 1500 Interfaces 2 Serial up to 38,4kB / 1x Host RS232, DB25 / 1x Printer RS232, DB9 / Data flow control: Xon/Xoff, DTR or none / Option: RS422 or Current Loop Data format 7 or 8 bit / even,odd or no parity / parity check on or off / 1 or 2 stop bits Transmission mode full or half duplex / block Printer interface 1x serial, RS232 DB 9 Power supply 95 - 264 VAC, 47 - 63 Hz Power consumption (max.) 24 W Other hardware Bosch disk reader FDS 514 Bosch PDV control unit Bosch Handheld HBG 2 incl. trolley and various data cables Item condition: used Complete factory closure, wide range of storage platforms, pallet racks, shelf racks, paternosters. High quality industrial machines, lathes, grinding machines, hand machines More items - new and used - you will find in our store! International shipping costs on request!

Condition: good (used), Year of construction: 2005, This is a programmable sandblasting machine with a working area of 100x100mm. Includes documentation and instructions. Gkjdpfx Afev Rcycotjf The machine dimensions are: WxDxH - 1300x700x1750

Condition: excellent (used), Indramat (24474 internal) Gkodefg Uu Hopfx Aftef Mod.1X1X113-008 Contr.TDM 1.2-50-300-W1