Used Ramm for sale (2,764)

Condition: used, Programmable AC power source voltage regulator Laboratory Power Supply, Power Supply, Programmable AC Power Source CHROMA Type 6415 : 64150296 Year of manufacture approx. 2000 Input values - Input voltage: 190 ~ 250 Volt AC Input frequency: 47-63 Hz Input current: max. 12 Amp. Output values- Output voltage range: 0 to 150 VAC / 0 to 300 VAC Max. Output current: 15 A / 7.5 A Output power: 1500 VA Efficiency 80% Number of output phases: 1 Accuracy: 0.2% + 0.2% of F.S. Resolution: 0.1V Distortion: 0.5% for frequencies 45 - 500 Hz 1.0% for frequencies >500 - 1 kHz Line regulation: 0.1% Load regulation 0.1% Output frequency: 45 - 1000 Hz. Accuracy: 0.1 Resolution: 0.1Hz Tjdpsdz Sraefx Aaqjd Measurement: V, F, I, P, PF, CF MAIN FUNCTIONS: - High measurement accuracy for RMS voltage, RMS current, active power, frequency, power factor and current crest factor - Built-in power factor correction circuit - Programmable current limiting - Integrated output cut-off relays - EEPROM memory for user-defined voltage and frequency combination for instant recall at any time - Optional GPIB, RS-232 and analog programming interface - Over voltage, under voltage, over power, over current, over temperature and short circuit protection - Temperature-controlled fan speed - Self-test when switching on - Supplied as shown, without additional accessories and connection cable Additional connections: - BNC (EXT VREF) - 9 Pol. D-Sub (RS-232C interface) - 24 Pol. Centronic (GPIB) Space requirement H x W x D 221.5 x 425 x 567 mm Weight: 23 kg good condition

Condition: as good as new (ex-display), PFAFF 8320 - 111/101 long-arm version with table Tjdpexa D Hrjfx Aaqjd

Condition: good (used), Here, we offer a Bosch Sigpack Systems with Manz AICO counterpart hand-held programming device. Bosch Sigpack Systems with Manz AICO counterpart hand-held programming device Bosch Sigpack Systems XR31-3 with Manz AICO pendant P51 hand programming device 80017134 Bosch Sigpack Systems Type: XR31-3 Manz handheld programming device Type: 80017134 Condition: pre-owned / used Scope of delivery: (See image) Tedpfxedqbbcs Aaqod (Errors and omissions in the technical data, information are reserved!) We can answer questions on the phone for you. Written order possible by email or fax

Condition: new, Stromab Matrix F Automatic Fully Programmable Cross Cutting & Notching Machine A heavy duty optimising upstroke crosscut and notching machine, designed for programmable and repetitive cutting and notching from standard and / or random lengths of timber. The saw unit has a pneumatic upstroke action with variable speed control, The notching unit is independent of the saw and therefore allows for programming of the saw or notching either as separate program's or as one single job. The pusher / feed is fitted with a heavy duty rack and pinion drive feeding system for fast positioning giving a high level of repeat cutting accuracy. The saw unit and clamping area is totally enclosed by a clear hinged electrically interlocked hood that while giving the operator a clear view of the cutting area still gives complete protection. The infeed and outfeed tables are of all steel construction meaning even heavy sections or packs of timber can be processed. For additional operator safety the rear of the pusher system is guarded, while there is a full length safety pull cord on the front infeed table. Programming and entering of cutting lists is very simple through a colour touch screen controller with graphic representation of the cut pieces. The machine offers full optimisation and also has the added optional facilities of defect cutting and remote programming from PC or laptop with transfer vis USB key or network. Additional options also include - extended outfeed table and label printing. To date we have supplied over 250 Matrix saws in to the UK, with a number of customers installing several machines. Saw unit Self braking saw motor 10hp Saw blade diameter 500mm Todpsdy Hrdefx Aaqed Max cutting width 360mm ( refer to chart ) Max cutting height 135mm ( refer to chart ) Dust extraction 4 x 100mm diameter Milling Unit Self braking milling motor 5.5hp Pneumatic milling stroke with adjustable speed Max milling stroke 400mm Max milling width 100mm Max milling depth 60mm Dust extraction 2 x 125mm and 2 x 100mm Push feed system 3000 to 13000mm Precision rack and pinion drive to pusher with magnetic reading tape giving a high level of repeat cutting accuracy. Pneumatic rising of the pusher at the end of cutting cycle Piece length reading photocell Positioning speed 100m/min Positioning accuracy + /- 0.4mm Touch screen control unit Remote programming of cutting list via colour graphic touch screen controller - connection via USB key. - 6 optimising criteria - longest size, minimum waste, sequence, priority size, by volume or by value. - 1000 cutting lists - 10,000 lines per list. - Cutting list entered via controller key pad or via remote PC using PC or cable - Graphic description of the workpiece.

Condition: used, Keyboard, control panel, PLC workstation, programming device, handheld programming device, programming adapter Tsdpeqh Ed Eefx Aaqed -Manufacturer: Pilz, programming adapter with case -Type: P10 PA 304113 -Dimensions of the case: 230/185/H45 mm -Total weight: 0.4 kg

Condition: good (used), Programming cart KP-Qume QVT52 III consisting of: Mobile PC Type: KP-Qume QVT52 III Screen diagonal 14" (35,5 cm) Picture tube flat, white phosphor Screen display 24 lines / 80 or 132 characters / 1 status line / 1 user line Character display - 80 characters: 14 x15 matrix in a 16 x 16 cell or 14 x 12 matrix in a 16 x 13 cell - 132 characters: 7 x15 matrix in a 10 x 16 cell or 7 x 12 matrix in a 10 x 13 cell Frame rate depending on character display: 78, 70 or 65 Hz Character sets 96 ASCII characters, 7Bit ISO. In QVT119+ emulation: IBM code page 437/850 Screen saver yes, adjustable times Memory depending on emulation 4 or 7 screen pages Keyboard New ASCII (N.A.), different languages, 20 + 1 function keys programmable Emulations Qume QVT 101+/119+, Wyse WY30//50, TeleVideo TVI 910+/925/905, ADDS A2, ADM 5, ADD ENH, HZ 1500 Interfaces 2 Serial up to 38,4kB / 1x Host RS232, DB25 / 1x Printer RS232, DB9 / Data flow control: Xon/Xoff, DTR or none / Option: RS422 or Current Loop Data format 7 or 8 bit / even,odd or no parity / parity check on or off / 1 or 2 stop bits Transmission mode full or half duplex / block Printer interface 1x serial, RS232 DB 9 Power supply 95 - 264 VAC, 47 - 63 Hz Power consumption (max.) 24 W Other hardware Bosch disk reader FDS 514 Bosch PDV control unit Bosch Handheld HBG 2 incl. trolley and various data cables Item condition: used Complete factory closure, Tsdpfx Asivd Eaoaqjd wide range of storage platforms, pallet racks, shelf racks, paternosters. High quality industrial machines, lathes, grinding machines, hand machines More items - new and used - you will find in our store! International shipping costs on request!

Condition: used, Programming console, operator panel, robot teach pendant Robot teach pendant, teach box, handheld command station, handheld panel BOSCH REXROTH Type: IndraControl VEH30.1 The VEH 30.1 is suitable for: 1. Operating and visualizing IndraLogic, IndraMotion MLC, IndraMotion MTX. 2. Setting up machines and systems. 3. Operating and diagnosing extended handling systems. 4. Visualizing simple operator panels on assembly lines. Type No.: VEH30.1BJN-128ET-G3D-128-BS-NN-FW Material No.: R911170692-104-08W34-I-B-H-T Serial number Year of manufacture: 2008 Firmware: FWA-VEH*01-CWN-01V07-EN R911310833-103 Year of manufacture: 2008 Operating system: Windows CE 4.2 Interface: 1x Ethernet (RJ 45) Nominal voltage: 24 VDC Nominal current: 0.7 A Power consumption: max. 14 W Display: 8.4" Touch TFT, 800 x 600 pixels Operation: Touch and keypad operation with 34 keys Protection class: IP65 - Connection cable approx. 8 m - 19-pin connection plug - Three-stage enabling switch - Flexible use thanks to hot-plug capability Todpjd Ab D Ssfx Aaqed Weight: 3 kg Fully functional, tested In good condition

Condition: new, Year of construction: 2022, PFO 3D-2 HAL Highest productivity - Highly dynamic and highly accurate 3D scanner with lightweight mirrors, with which applications up to 8000 W can be realized - Incl. documentation, transport packaging and spare parts catalog Numerous interfaces - For robot communication in "on-the-fly" operation Sensor recording for quality monitoring - Process monitoring (e.g. connection of photodiodes, camera or pyrometer) is possible on the PFO TruControl 1000 control system incl. PFO software - Optimum synchronization between laser and processing optics - For simple control and operation of the laser device and the PFO either via a control panel or an external PC - 24x digital I/O interface, expandable with fieldbus interfaces such as ProfiBus, DeviceNet and many more - Storage option for 199 laser programs Maximum process reliability - Integrated crossjet for maximum protective glass service life Todpett Eb Dofx Aaqsd - Highest repeatability of process results thanks to minimization of the metal vapour effect (MDE) by special nozzle Vision Line Basic - Digital camera image with crosshairs in the laser focus for observation of the workpiece and teaching - With scanner optics, the effect of chromatic aberration is minimized aberration is corrected for all positions in the processing field - Integrated algorithm for simple calibration - Convenient touchscreen operation - Still image / live image - Saving of images TruTops PFO - Offline software for 3D programming - Network connection to TruControl - Enables the programming of different wobble methods wobble methods

Condition: good (used), Year of construction: 2005, This is a programmable sandblasting machine with a working area of 100x100mm. Todpfx Aov Rcycsaqod Includes documentation and instructions. The machine dimensions are: WxDxH - 1300x700x1750

Condition: used, Keyboard, control panel, industrial, PLC workstation, programming device, handheld programming device -Manufacturer: Siemens, programming device Coros with accessory cable orig Tsdpfx Aaehy Rp Rjqed -Type: Coros OP3 6AV3503-1DB10 -Dimensions cardboard: 235/230/H55 mm -Total weight: 0.7 kg

Condition: used, Keyboard, control panel, industrial, PLC workstation, programming device, handheld programming device Todpfxohyx N Ae Aaqod -Manufacturer: Siemens, programming device Simatic PG 615 -Type: Simatic PG 615 6ES5 615-0UA11 -Dimension: 300/150/H60 mm -Total weight: 1.2 kg

Condition: used, Keyboard, control panel, industrial, PLC workstation, programming device -Manufacturer: Siemens, programming device Simatic PG 605 with case -Type: Simatic PG 605U 6ES5 605-0UA12 -Dimensions case: 390/300/H90 mm -Total weight: 1.7 kg Tsdpjhyx Rkofx Aaqod

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 605, rotational speed (max.): 3,000 rpm, grinding diameter: 12 mm, controller model: Robot CNC, workpiece height (max.): 100 mm, table diameter: 200 mm, TECHNICAL DETAILS Grinding capacity (diameter): Ø 0.025 – 12.7 mm Bar diameter: Ø 1.0 – 12.7 mm Grinding length: W15 (optionally W20) Number of wheels: 1 Table diameter: 200 mm Workpiece height: 100 mm Control system: Robot CNC Axes: 4 axes + 2 programmable robot axes Z-axis: 35 mm, resolution: 0.5 µm X-axis: 25 mm, resolution: 0.1 µm Y-axis: 286 mm, resolution: 0.5 µm U-axis: 15 mm, resolution: 0.1 µm Interpolation: Simultaneous linear interpolation of 4 axes, cylindrical interpolation of 2 robot axes Head Motor Power: 0.70 kW Speed: 300 – 3,000 rpm Rough Grinding Power: 1.5 kW Spindle diameter: Ø 60 mm Grinding wheel diameter: Ø 200 mm Cutting speed: 30 m/s Finishing Power: 0.75 kW Spindle diameter: Ø 100 mm Grinding wheel diameter: Ø 150 mm Cutting speed: adjustable MACHINE DETAILS Total power requirement: 6 kW Machine weight: approx. 1.8 t Space requirements (L x W x H): approx. 1.83 x 2.04 x 2.1 m Tedpfx Aoxnzd Doaqjd EQUIPMENT - Robot for loading and unloading - Fire protection system

Condition: as good as new (ex-display), Year of construction: 2023, functionality: fully functional, A complete carton packaging and palletising line with comprehensive accessories is being auctioned here! This is a demo machine that was only in operation for a few days! COMPONENTS OF THE PACKAGING LINE Packaging robot KUKA KR 50 R2500 Iontec Gripper Base Labelling robot KUKA KR 10 R110-2 Agilus Gripper 2 Labelling systems Peripheral components Pallet station Room triangle Lantech carton erector Conveyor technology by Interroll Safety equipment Protective enclosure Safety door Safety tunnel Light curtain Centralised control system COMPONENTS OF THE PALLETISING LINE Palletising robot Tedpfxoxhf Aws Aaqsd KUKA KR 120 R3200 PA Gripper Base Palletising software Flex Package Labelling robot KUKA KR 10 R1100-2 AGILUS Gripper Printwolf table printer Peripheral components Lantech carton sealer Lantech turntable stretch wrapper Conveyor technology Pallet dispenser BILA Pallet conveyor system by Interroll Carton conveyor system by Interroll Carton conveyor system NiO Interroll Safety equipment Protective enclosure Safety doors Programmable safety PLC Airlock at the pallet exit Protection tunnel Centralised control system Further details on the individual components can be found in the attached inventory list. The machine can be provided ready for free loading. Dismantling and loading costs amount to €48,000.

Condition: excellent (used), functionality: fully functional, Year of construction: 2011, operating hours: 3,149 h, controller model: Sinumerik 840 D sl, laser power: 3,200 W, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 115 mm, No reserve price – guaranteed sale to the highest bidder! The machine has been regularly serviced by Trumpf (most recently in May 2024). The machine has only 3,149 beam hours! TECHNICAL DETAILS X-axis travel: 3,000 mm Y-axis travel: 1,500 mm Z-axis travel: 115 mm Positioning Accuracy Average positional variation on sheet metal: ±0.03 mm/m Positioning deviation Pa on sheet metal: ±0.1 mm/m Smallest programmable increment: 0.001 mm MACHINE DETAILS Control: Sinumerik 840 D sl Laser power: 3,200 W Footprint & Weight Footprint (L x W): 6,500 x 7,600 mm Weight: 12,000 kg Todjxrk Imspfx Aaqod Operating Hours Laser on-time: 13,378 h Laser beam-on hours: 3,149 h EQUIPMENT Two cutting heads Various spare parts Extraction system Manually extendable loading and unloading table Note: 2x TruTops software licenses can be purchased separately.

Condition: not inspected (used), Year of construction: 2000, functionality: unexamined, machine/vehicle number: 573251, travel distance X-axis: 525 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 450 mm, table width: 730 mm, table length: 630 mm, No reserve price – guaranteed sale to the highest bidder! The payment deadline for the machine is 20/11/2025! Placing a bid obligates you to collect the machine on time between 01/12/2025 and 05/12/2025! TECHNICAL DETAILS Tedpfx Aoxniwroaqod Travel distances Travel distance X-axis: 525 mm Travel distance Y-axis: 400 mm Travel distance Z-axis: 450 mm Travel path for electrode change and loading position: 675 mm Traverse speed X, Y, Z: max. 2,000 mm/min Work table Support surface: 730 × 630 mm Load capacity: 1,000 kg T-slots: 5 Integrated C-axis Speed (adjustable): 1–20 rpm Measuring resolution: 0.001° Work tank Version: tank lift controlled Internal dimensions: 750 × 650 × 420 mm Maximum dielectric fluid height: 375 mm Programmable/automatic: yes Work head Max. head load: 100 kg Distance from tool carrier plate to work table min./max.: 135/585 mm Dielectric fluid supply Filtration system: 4 cartridges (integrated) Filter area: 2 m² Total volume of dielectric fluid: 400 l MACHINE DETAILS Dimensions & weight Dimensions (L x W x H): 2,500 x 1,500 x 2,500 mm Weight: 4,400 kg Weight: 200 kg Electrical data Connected load: 25 kVA Fusing: 25 A Operating voltage/frequency: 400/50 V/Hz EQUIPMENT 20-position electrode changer Automatic central lubrication Pick-up disc magazine CO₂ fire extinguishing system according to DIN 14497 Compressor cooler

Year of construction: 2018, condition: ready for operation (used), Control Unit Brand HAAS Main Drive Spindle speed range 2400 rpm Spindle motor power 40 hp Number of axis 2 Todpexp Sl Uefx Aaqsd Tail Stock Pinol tool taper MT5 Media Chip conveyor Yes Additional Equipment Line Filter & Surge Suppressor – 220 VAC, 3-phase, 80 A, 60 Hz Early Power-Failure Detection Module Belt-Type Chip Conveyor This HAAS ST-40 was manufactured in 2018. It features a 15-inch chuck, a maximum part swing of 35.5 inches, and a cutting diameter of 30 inches. The machine includes a 2-speed gearbox spindle, capable of 2,400 rpm, and a 12-station BOT turret. Additional equipment includes a belt-type chip conveyor and a programmable servo tailstock. Consider the opportunity to buy this HAAS ST-40 horizontal turning machine. Contact us for more information about this machine. Application Types Turning

Condition: excellent (used), Year of construction: 2019, Doosan Puma TT2100SYY Mfd. 2019 Tooled as pictured Specifications SWING OVER BED 9.05" MAX CUTTING DIAMETER 9.05" DISTANCE BETWEEN CENTERS 38.5" X-AXIS TRAVEL 6.5" Y-AXIS Yes Y-AXIS TRAVEL 3.93" Z-AXIS TRAVEL 27.5" C-AXIS INDEXING FULL CONTOURING C-AXIS CHUCK SIZE 8" BAR CAPACITY 2.625" SPINDLE NOSE A2-6 SPINDLE MOTOR 35 hp SPINDLE SPEED 5,000 RPM RAPID TRAVERSE RATE - X-AXIS 1,181 in/min. RAPID TRAVERSE RATE - Z-AXIS 1,575 in/min. Tjdow Dvnxjpfx Aaqsd SUB SPINDLE Yes SUB SPINDLE - CHUCK SIZE 8" SUB SPINDLE - BAR CAPACITY 2.56" SUB SPINDLE - SPINDLE NOSE A2-6 SUB SPINDLE - SPINDLE MOTOR 25 hp SUB SPINDLE - SPINDLE SPEED 5,000 RPM SUB SPINDLE / W-AXIS TRAVEL 28.7" TURRET CAPACITY 12 TURRET TYPE BMT55 LIVE MILLING Yes LIVE MILLING SPEED 5,000 RPM LIVE MILLING MOTOR 10 hp TURRET 2 CAPACITY 12 TURRET 2 - X-AXIS TRAVEL 6.5" TURRET 2 - Z-AXIS TRAVEL 27.56" Dimensions 93" X 153" (W/CONVEYOR - 186") X 88.6"H Weight 20,940 LBS Equipped With FANUC OiTF CNC CONTROL DOOSAN EZ GUIDE i PROGRAMMING TWIN 12 POSITION TURRETS UPPER AND LOWER, W/24 POSITION INDEXING ON EACH TURRET WITH BASE MOUNT TOOLING SYSTEM Y-AXIS ON BOTH TURRETS (2) INTEGRAL SPINDLES FULL CONTOURING C-AXES ON BOTH SPINDLE MILL/DRILL ON UPPER AND LOWER TURRETS PARTS CATCHER LEFT AND RIGHT PROGRAMMABLE PARTS UNLOADER PARTS CONVEYOR BAR FEED INTERFACE 8" 3-JAW KITAGAWA CHUCK FOR LEFT AND RIGHT SPINDLES (COLLET SYSTEMS IN ON MACHINE NOT INCLUDED IN SALE) (2) X-AXIS LIVE HOLDERS (2) Z-AXIS LIVE HOLDERS STANDARD FACTORY STATIC TOOLING DOOSAN TOOL LOAD MONITORING SYSTEM AIR BLAST SYSTEM FOR CHUCK CLEANING 2 machines available

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, QRP26 Automatic Mesh Welding Portal inclusive of: • Tooling for 49 line wires • Top and bottom electrodes and current distribution • Pneumatic weld presses x 25 (Parallel/Direct Weld Triplex) • Transformers 250kvA x 13 • Weld controllers • Electrical panel • Programming computer Tsdpfx Aaexgg T Ueqjd • 2500mm (100”) wide Including PLL 26 automatic linewire picking and loading system.

Year of construction: 2020, condition: used, functionality: fully functional, machine/vehicle number: MY2002/018, Y2002/034, The compact FOBA M1000 laser workstation is designed for high-quality laser marking of small components, medium-sized workpieces, and small production runs. In addition to the automotive industry and the metal, tool, and mechanical engineering sectors, this small and mobile universal marking machine is particularly suitable for medical technology, plastics processing industries, and contract laser marking (e.g., promotional items). The M1000 enables both small metallic and plastic components and series to be marked efficiently and with high-quality results. Operating in laser class 1, the marking station features a programmable Z-axis, a small work table, and a smooth manual or optionally electrically operated lift door that provides access to the interior from three sides. To cover a wide range of applications, various fiber laser markers can be integrated. Main application areas: Automotive and automotive supply industry, tool and mold making, mechanical engineering, medical technology, plastics processing industries, contract laser marking (e.g., promotional items). The M-Series comprises advanced manual workstations for precise and economical laser marking of small to large and geometrically complex workpieces, as well as batches and small production runs. Two housing sizes (M2000 and M3000) and three models each (B: with work table; R: with rotary table; P: with X/Y/Z axis) are available. Modern fiber and UV lasers can be integrated, as well as camera systems for marking alignment, mark inspection, and code reading. The highly productive R models: motorized Z-axis, 2-station rotary table; ideal for marking a variety of serial parts (e.g., automotive interior components, metal parts, tools, medical products such as implants or instruments). Main application areas: Automotive and automotive supply industry, tool and mold making, mechanical engineering, medical technology, plastics processing industries. Tsdpfew Npfgex Aaqsd

Condition: used, Year of construction: 2008, control 840 D Sinumerik Todswwar Iopfx Aaqjd weight of the machine ca. 25 t dimensions of the machine ca. 5100 x 3034 x 4500 mm Technical Details: Largest workpiece diameter Ø 1000 mm Internal workpiece diameter Ø 100-500 mm Largest workpiece length 500 mm Largest oscillation diameter 1250 mm Workpiece spindle flange diameter 520 mm Through-hole of the workpiece spindle Ø 45 mm Workpiece spindle speeds NC - programmable 0-440 rpm Table strokes: Z1/Z2 axis 1000 mm, X1/X2 axis approx. 1300 mm Table speed infinitely variable: Z axis 0-30 m/min, X axis 0-50 m/min Infeed speed infinitely variable 0.01-15 mm/min Infeed stroke-dependent 0.0005-0.1 mm Workpiece spindle positioning C-axis Operating voltage 3~400 VAC/50 Hz SINUMERIK 840 D control Machine connected load approx. 75 kW

Condition: used, mileage: 528,552 km, Year of construction: 2018, Serial number: YS2R6X2000214xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21316 Spesifikasjoner:  2018 modell   528.552 km (vil øke litt)   Euro 6 motor  520 hk   Euro 6  Automatgir  Retarder  Skivebremser  Boggi  6x2  Løft på 3 aksling  Dekk (se bilder)  Zepro Lift   Nye batterier   Kjøl/Frys aggregat  2 soner  Carrier aggregat (ukjent stand) Todsxcfg Espfx Aaqsd  Webasto  Radio/DAB  Klima/AC  Kjøleskap  Tot. høyde: 4,20  Innvendig høyde: 2,85  Innvendig Lengde: 7,50  Leveringsklar     Beskrivelse:  Vi har en 2018 Scania R520 m/ kjøl/frys aggregat i ukjent stand for salg. Kjøl/frys aggregat er i ukjent stand da den ikke er blitt brukt på ca 1 år i følge eier.  skapet på bilen har en liten bulk venstre framme. Det kommer noe vann inn i skap ved mye nedbør.  Feil og mangler kan finnes og noe påkost må regnes med.  Leveringsklar  Km: 528552 HK: 519 Technical approved: Yes EU-approved until: 14.10.2026 Own weight: 14850 Euro: 6 Gearbox: Automatic

Condition: as good as new (ex-display), Year of construction: 2021, operating hours: 50 h, machine/vehicle number: 100000997, CONDITION LIKE NEW. OPEN FRONTED VERTICAL MACHINING CENTRE WITH 4 SHEAR HARDENED & GROUND BOX GUIDEWAYS, ENHANCED ACCURACY & CUTTING PERFORMANCE. TABLE Working Surface - 1,150 X 600mm Tee Slot (Size x Number x Pitch) - 18mm X 5 X 120mm Maximum Table Load - 700 kg TRAVEL Longitudinal Travel ( X-Axis) - 1,000mm Cross Travel (Y-Axis) - 600mm Vertical Travel (Z-Axis) - 630mm Distance from Table Nose to Table Top - 100 – 730mm Distance from Spindle Centre to Column - 650mm Tjdpfx Ajhzxwksaqjd SPINDLE Spindle Nose Taper BT-40 Spindle Speed - PULLEY DRIVEN (STD.) - 8,000 RPM GEAR DRIVEN - 6,000 RPM FEED Cutting Feedrate - 12 M / Min Rapid Traverse (X and Y-Axis) - 20 M / Min Rapid Traverse (Z-Axis) - 20 M / Min ATC Tool Storage Capacity - S TYPE 20 (STD.) Tool Change Type - RANDOM Maximum Tool Weight - 6 kg Maximum Tool Diameter - S TYPE Ø95mm Maximum Tool Length - S:250mm Tool Shank - BT-40 Pull Stud Bolt - MAS P40T-1 MOTOR Spindle Drive Motor (Fanuc) (30 min) - 7.5 (STD.) kW ACCURACY Positioning - ± 0.005mm Repeatability - ± 0.003mm POWER SUPPLY Electric Power Consumption - 20 KVA Air Pressure - 6.5 KG / CM² Voltage - 415V / 50HZ / 3PH MACHINE Floor Space (Fully Guarded) - 2,900 X 2,640mm Height - 2,890mm Weight - S: 6,500 / A:6,700 kg FANUC 0IMF PLUS CNC STANDARD SUPPLIED MACHINE FEATURES • Fully Enclosed Splash Guard • Work Lamp • Spindle Air Curtain • Air Blast Through The Spindle • Automatic Lubrication System • Levelling Bolts And Blocks • Coolant Jets Around The Spindle • Operation And Programming Manuals • Tool Box • Electrical And Mechanical Manuals • Operation Finish Lamp • Automatic Power Off • Cooling System • Heat Exchanger In Control Panel

Condition: excellent (used), Year of construction: 2016, Tornos MultiSwiss 6x16 CNC Multi-Spindle Screw Machine Mfd. 2016 6 Spindles Diameter:16mm Fanuc Control Equipped as pictured Run time: 42,689 hrs Todswa D Tujpfx Aaqjd Power on: 64,668 hrs Standard tornos bar feed (5ft) 6 Motorspindles 5,5 kW max. speed 8’000 RPM Spindle capacity 14 mm, Z 50mm stroke (max. parts 40mm). 6 slides X 40mm stroke 1 counter-operation slide, 75mm stroke. Counter spindle with integrated motor 6 kW Max. speed 8’000 RPM, 150mm stroke. Numeric control Fanuc 30i Integrated PC with screen 17” Programming system TB DECO (DCS version) (requires 3001) contact us for more details

Condition: excellent (used), Year of construction: 2019, machine/vehicle number: 14974, Tornos MultiSwiss 6x16  CNC Multi-Spindle Screw Machine Mfd. 2019 6 Motorspindles  5,5 kW max. speed 8’000 RPM Spindle capacity 16 mm, Z 50mm stroke (max. parts 40mm). 6 slides X 40mm stroke 1 counter-operation slide, 75mm stroke. Counter spindle with integrated motor 6 kW Max. speed 8’000 RPM, 150mm stroke. Numeric control Fanuc 30i Integrated PC with screen 17” Tsdpfx Ajv S H Uyoaqod Programming system TB DECO (DCS version) (requires 3003) contact us for more details