Channel buy used

Identified location: Ashburn (US) (Edit)
Enter your address
or
Move
3
Side channel blowers, ring blower, side channel blowers, vacuum pump Qlosvhq7u Drive 1.1 kw Speed 2880 RPM Connection 1 1/2 "inch Dimensions 420/280/H340 mm Weight 20 kg more
8
good used press comes from a bankruptcy must in Fulda mined without warranty of the mobile, hydraulic channel baling presses ABBA is still connected CT 600 V is for the compression of cardboard, paper, foils, DSD commodities, PET bottles, cans wastes, and other political groups. More data Bcs9kbrvq7 more
1
Becker SV 2.130/1 Year 1978 - Serial-No. B676219 I9dpzed -Available Immediately - -can be inspect- -on stock - can be test- more
2
1,60 kW Side channel blower - vacuum pump - BUSCH - as new Manufacturer: BUSCH / Germany Type: SB 0200 D 0H0 UE XX Condition: Hasn´t been in operation, as new. Can be used as blower / compressor or vacuum pump for air. Technical data: 3ql8vkcn as blower: max. pressure + 190 mbar as vacuum pump: up to -200 mbar (= 815 mbar abs.) Air flow: max. 210 m3/h Motor: Power: 230 / 400 VAC - 3 Ph. - 50 Hz - 1,60 kW - 7,5 / 4,3 A Multi-ran... more
6
Manufacturer Bollegraaf Type HBC 80 A Year of construction 2003 Working hours 50,422 h Press power main press 78 tons Press power of pre-press 45 tons Feed channel 1,500 x 1,100 mm (l x w) Capacity per cycle time 2,9 cbm Theoretic cycle time 22 sec. Volume throughput rate under operating conditions 400 up to 490 cbm/h Bale size 1,100 x 720 mm (w x h) length adjustable Driving motor 45 kW Connected load 60 kW Tying system 5-fold vertical, fully automated Throughput rate at a bulk weight of 15 k... more
6
Semi-automatic channel baling presses of BIG presses Germany. Good condition. Was used only for making verse of plastic waste. New cutting edge knives and spare blades available. EPROM expired. 8h9bgowk9 more
5
Side channel blowers, ring blower, side channel blowers, vacuum pump drive 2,2 kw speed 2650 RPM flow 260 m / h weight 40 kg Qkqvng0ji more
4

CHANNEL BALING PRESS PAAL Konti 700 E/K

Gen. St. Maczka 9, 43-300 Bielsko-Biała, PLPoland
7229 km
2007
good (used)
We offer you the automatic channel baling presses to reduce volume of waste, PAAL accounts at 700 E / K. Maximum pressure: 170 tonnes year: 2007 Pressing force: 140.5 tons / sqm number of tying: 5 - 4 - fold vertically, horizontally Channel cross-section: 1100 x 1100 mm dimensions of the loading door: 1020 x 2000 mm Bale weight: 525-700 kg weight: approximately 44 tons Power supply: 400 V / 165 kW (3 x 45kW) Bale setting: automatically Dvsmmy more
7
Siemens Elmo-G 2BH6 100 Year - - Serial-No. 5H84889545087 -Available Immediately - Nev3b -can be inspect- -on stock - can be test- more
5
3,0 kW Side channel blower - vacuum pump Manufacturer: Rietschle / Germany (Gardner Denver) Type: 2BH1600 - 7AH26 Condition: Hasn´t been in operation. As new. Technical data: Power: 3,0 kW (at 50Hz) Bba7kyvdvs Can be operated up to 87 Hz with 5,0 kW as compressor max. pressure +270 mbar as vacuum pump up to -260 mbar (=755 mbar abs.) Flow rate: max. 320 m3/h Voltage 230 / 400 VAC (multi range motor) Class of protection: IP 55 Weight: .....kg Can be used as blower (f... more


channel
daily

New machines via email!

Stay updated!
6
Manufacturer Bollegraaf Type HBC 80 Year of construction 1992 Press power main press 78 to Press power of pre-press 45 to Bccjvaspoi Feed channel 1,500 x 1,100 mm (l x w) Capacity per cycle time 2,9 cbm Theoretic cycle time 22 sec. Throughput rate under operating conditions 300 up to 450 cbm/h Bale size 1,100 x 720 mm (w x h) length adjustable Driving motor 45 kW Connected load 60 kW Tying system 5-fold vertical, fully automated Throughput rate at a bulk weight of 30 kg/cbm approx. 10 to/h b... more
1
 Start Chat

Side channel compressor - vaccum pump Oranienburger Pumpen GR2HVX 40/290

Borken-Burlo, GermanyGermany dealership location
6360 km
used
2,2 kW PD PA 16,000 PS PA 12,000 V m3/h = 2 x 130 n RPM 2800 2 x available,. Es9o2ff with various barrels, as separator can be used more
5
Distribution for filter plant, sawdust, dust extraction, extraction, ventilation ducts and fittings Pipe connection Ø 300 mm X79aqagnk Length 495 mm Cone piece Ø 300/250 mm Length 155 mm Distributor piece Ø 250 to 4 x Ø 140 mm -biegsame tubes Ø 140 mm Length 2 x 1730 mm / 2 x 1930 mm -Sheet steel Transport dimensions 1930/500/H300 mm Weight 30 kg more
4

Channel Balers Lindemann Bimax 12

Bielsko-Biała, PolandPoland dealership location
7229 km
1993
good (used)
Max. pressure: 120 tons Year of production: 1993 Unit pressure: 99,1 tons/m² Cross-section of the channel: 1100 x 1100 mm Filling inlet: 1060 x 1400 mm Supply: 400 V/ 90 kW (2 x 45 kW) Fz0lxqmmw Bale tying: automatic, wire Theoretical efficiency with material in density 20-30kg/m3: 6-8 tons/hour Theoretical efficiency with material in density 40-60kg/m3: 12-17 tons/hour Theoretical efficiency with material in density 70-100kg/m3: 19-27 tons/hour more
1
Side channel blower - vacuum pump Rietschle SKK 38203 (40) Year 2006 - Serial-No. 1018764074 Nev2x -Available Immediately - -can be inspect- -on stock - can be test- more
7
Side channel blower BECKER 4,0 kW - vacuum pump - with frequency converter for rotation speed control Manufacturer: Becker - Made in Germany Type: SV8 190/1-401 With integrated frequency converter for rotation speed control, with integrated controller. Has been in operation, excellent condition. Can be used as blower / compressor or vacuum pump for air. Pulse free air flow. Single stage. Technical data: as blower max. pressure +260mbar as vacuum pump up to -270mbar (=740mbar ... more
6
Manufacturer Bauer Typ 500 Year of construction 1994 Hours of operation 26.663 hours Press power main press 50 to Press power free stamper 24 to Feed channel 1.800 x 1.020 mm (l x w) Bccj0vy0k2 Capacity per cycle time 2 cbm Theoretic throughput rate 350 cbm/h throughput rate under operation 180 cbm/h Bale size 1.100 x 680 mm (w x h) length adjustable Driving motor 2 x 22 kW Tying system 4-fold vertical, fully automated Throughput rate at a bulk weight of 30 kg/cbm approx. 3 ? 5 t/h bulk wei... more
4
Machine height - 2.000 mm Width - 1.500mm Weight - approx. 2.5-3 to Year of construction - 1998 Engine - 15 kW Ss3ig8 Pressure - 24 to Machine no. - 6614P00474 Bale format - 700 x 500 Bale weight - 150-250 kg, depending on the material Filler - 1000 x 630 mm Filling height - 1560 mm Setting - 3 horizontal, automatically Bales / hour performance - 5-10 bales / h Filling space - 1000-630 mm Length - 6.100mm Type - HSM VK 2... more
5
Ring blower, side channel blowers, vacuum pump Drive 0.75 kw -Fördermenge 130 m³/h -Max compaction pressure 195 mbar Speed 2800 RPM Sfop09yvb -2 x pumps available Award pieces Dimensions 320/280/H420 mm Weight 16 kg / piece more
4
Screen printing three-quarter machine custom made with hot air dryer can also be used as a semi-automatic machine. Ptprsy Print format 1200 x 1800 mm. Printer Emm 444 Drying Channel M-jet offshoot and year of manufacture: approx. 1993 Location: germany Price: On request more
3
Side channel blower - vacuum pump Rietschle SKG 200 - 2.02 Serial-No. 317353 -Available Immediately - Nevwx -can be inspect- -on stock - can be test- more
6
 Start Chat

Channel Baler Austropressen APHK-12

Tata, HungaryHungary
7314 km
2000
good (used)
In sale an Austropressen automatic baler, which was produced in 2000th C3zthss3 This rescue equipment has a maximum pressure of 120 kN and a bale format mm 600x500x1200 To press force 12 Drive kW 4 Pressing cycle sec 40 Specific pressing force N / cm² 40 Filling opening mm 600x520 Filling height mm 1600 Ball format mm 600x500x1200 Bale weight kg 80-100 binding 2h Dimensions lxwxh mm 4200x1400x1800 Weight kg 1450 more
6
Manufacturer BOA Typ 181.(6)[...] Year of construction 1994 Press power main press 78,5 to Bccj7vestf Press power of pre-press 1 + 2 41,7 / 47,2 to Feed channel 1.620 x 1.080 mm (l x w) Capacity per cycle time 2,5 cbm Bale size 1.100 x 800 mm (w x h) length adjustable Driving motor 55 kW Connected load 70 kW Tying system 4-fold vertical, 2-fold horizontal, fully automated Bale weight approx. 500 - 600 kg Comments: Inspections are possible after agreement. We will not assume liability for t... more
5
Channel construction laser Extension cable -2 targets ø 150 mm Ø 200 mm Hmmlgkr Transport case more
6

UV-Drying Channel for profile strips Makor Kurex

Barntrup, GermanyGermany dealership location
6505 km
2008
good (used)
UV-Dryer make Makor M2elf type Kurex built 2008 UV-Drying Channel for profile strips conveyor belt width 130 mm feed variable approx. 35 - 70 m/min. equipped with 4 adjustable UV-lamps, length each 280 mm machine dimensions approx. 3200 x 1300 x 2300 mm weight approx. 1400 kg more
4
Max. pressure: 8,5 - 9 tons Year of production: 2007-2010 Unit pressure: 34-36 tons/m² 90qdi3ci8 Cross-section of the channel: 500 x 500 mm Filling inlet: 400 x 450 mm Supply: 400 V/ 4 kW Bale tying: manual The machine is fully operational after service and after PREMIUM paint renovation. more
6
230V - 2,2 kW Seitenkanalgebläse Rietschle Gardner Denver several available Manufacturer: Elmo Rietschle Gardner Denver / Made in Germany Type: G-BH1 2BH1530-7AV65-Z Condition: As new. Hasn´t been in operation Can be used as blower / compressor or vacuum pump for air. Pulse free air flow. Single stage. Data sheet included. Silencers included. Technical data: as vacuum pump: up to approx. - 200 mbar (= approx. 815 mbar abs.) as compressor: up to approx. + 23... more
6
Manufacturer Paal Typ Konti 600 D/K Year of contruction 2001 Press power main press 145 to Feeding volume 3,45 cbm Feed channel 2.000 x 1.020 mm (l x w) Bale size 1.080 x 1.100 mm Driving motor 3 x 45 kW Connected load 171 kW / 320 A Tying system 5-fold vertical, 4-fold horizontal, fully automated Throughput rates under operating conditions 540 cbm/h Throughput rate at a bulk weight of 30 kg/cbm approx. 16,5 t/h bulk weight of 50 kg/cbm approx. 27 t/h bulk weight of 100 kg/cbm approx. 40 t/... more
3
Beautiful old Grundig Oszi, worked very well until recently. Unfortunately no display function anymore, therefore either picture tube or line transformer (or others?) defective. Was once very expensive (about 800 Euro), very exact device with practical form factor (narrow + high). Bysjxwyk more
5

Gross baler 88 to HSM HSMVK8515

Wiefelstede, GermanyGermany dealership location
6385 km
2001
used
Big baler, channel baling presses Ddjomkv Main drive power 90 kW + 30 KW Pressing force 88 t-vollautomatische injection -vollautomatische wire strapping -Ballen-/ channel cross-section B x H 1100 x 750 mm Bale length of 4-stage adjustable 600 - 1,200 mm Bale weight with 1200 mm length approximately 500-800 kg Cycle time approx. 9.8 sec Throughput depending on the density 5.50 to 16,50 t / h Types of materials PE foil -PET bottles Paperboard Textiles more
7

Channel baling press Presto (Kampwerth) Presto GmbH & Co. KG HPK 70

Gutenbergstraße 22, 28816 Stuhr bei Bremen, DEGermany
6434 km
2008
good (used)
Type HPK 70 Year of construction 2008 Operation hours 2210 h Press power 70 t Int._No.2 Motor power 55 kW Cycle time 17,5 S Feeding opening 1600 x 1050 mm Channel cross-section 1100 x 700 mm Throughput rate with 35 kg/m³ 6,7 t/h Bb8bs3x27w Throughput rate with 60 kg/m³ 10,1 t/h Throughput rate with 100 kg/m³ 13,6 t/h Bale weight Up to 600 kg, depending on material Binding 4-fold vertical, automatically Dimensions 8500 x 1700 x 2700 mm (L x W x H) Machine weight approx. 13000 kg ... more
7
UV-drying with IR drying channel IS a manufacturer, year 2000 Fwzsui7 UV dryer with 5 lamps, working width 300 mm (Conveyor belt is missing) IR-dryer with 5 lamps working width 300 mm Driven roller conveyor more
3
Side channel blowers Siemens, type Elmo G 28 H1810-1 HC36, engine 11 kw, can be used as suction or pressure blower, with intake and exhaust air silencer Bbir32r70g ready to use more
6
Automatic chain morticer Compressor and pneumatic advancement Key slotting and handle Routing taitiere 380V Bb3w2sfh8k more
5
High pressure two - stage side channel blower Rietschle 230 or 115 VAC - 1,5kW Manufacturer: Rietschle Gardner Denver - Made in Germany Type: G-BH1 2BH1410-7HV45-Z Condition: Hasn´t been in operation, as new. Can be used as blower / compressor or vacuum pump for air. Technical data: as blower: max. pressure + 260 mbar = 103 inch H2O as vacuum pump: up to -280 mbar (= 735 mbar abs.) = 112 inch H2O Air flow: max. 140m3/h = 85 cfm ... more
5

Gross baler 88 to Welger ZF-3000 SB-3000

Wiefelstede, GermanyGermany dealership location
6385 km
2004
used
Big baler, channel baling presses Machine comprising - feeder type: ZF 3000 Channel baling press type: SB 3000 Bplrsym7 Main drive power 13.95 of kW force 31 t-vollautomatische injection -vollautomatische wire strapping -Ballen-/ channel cross-section B x H 800 x 700 mm Bale length adjustable 800-1500 mm Bale length mm weight approx. kg Cycle time approx. 11.5 sec Throughput depending on the density max 3000 kg / h -Type of material: PE foil, PET bottles, cardboard, textiles Machin... more
6
Rietschle Side channel blowers / vacuum pump Bb072lydlb Motor kw 11. Rt27njcb Technical data: 11 kw Connector 2 x 100 mm Weight 115 kg more technical data please take the nameplate An invoice is created for you. The VAT ID according to § 25a VAT Act does not apply more
1

Vibratory channel (2 m) Rudnick & Enners 30 x 200

Bielefeld, GermanyGermany dealership location
6462 km
ready for operation (used)
Vibratory channel (2 m) SMA-REF-6219 Bblhyuk7kk Type: sawmill conveying, pushing, dumping Manufacturer: Rudnick & Enners Model: 30 x 200 Working range: Length: 2.000 mm Width: 300 mm Power: 0,5 kW Condition: ready for action Location: Austria Availability: on demand Terms of delivery: ex works Terms of payment: 100% before dismantling/loading more
5

Channel baling press Paal Konti 325 C

Gutenbergstraße 22, 28816 Stuhr bei Bremen, DEGermany
6434 km
1994
good (used)
Channel bale press Paal with conveyor belt Bbynmx0irc Type Konti 325 C Manufacturer: Paal’s Packpressen-Fabrik, Germany Type : Konti 325 C Year of construction: 1994 Press power: 85 t Hours of operation: 27.882 h Drive power: 123 kW Power supply: 3 x 400 V / 50 Hz Nominal voltage: 24 V DC Feed channel: 1.020 x 1.750 mm Throughput: 420 m³/h Bale size: 1.100 x 750 mm (w x h), at variable length Bale weight: Up to 725 kg, depending on material Tying system automated... more
4
Automatic channel baler PRESTO Machine after the renovation! Bawgt0anlt Promotion price: 15 600 Euros (net price) Technical description of the machine: Production year: 2001 Pressure: 40 tons Bale weight: 400kg Engine: 15kv Capacity: 2.5 tons per hour Bindings: 3 wires (vertically) Inlet opening dimensions: 70 x 120cm Bale dimensions: 70 x 75cm Machine weight: 6.5 tons Charging hopper has the possibility of connecting conveyor feeder and doors for manual charging Platform fo... more
7

Wire saw machine channel EUMENIA SW 1

Odenwaldstr. 63, 63322 Rödermark, DEGermany
6579 km
2002
good (used)
Technical data: -Saw feed by hand lever -Saw blade diameter 350 mm -Saw unit adjustable in height + adjustable tilt - largest opening width - width approx. 420 mm -adjustable miter vise Gpoh7f8yi -Powered 230VAC / 850 Watt -Space requirement approx. B H 800 x 600 X 1200 mm -Weight approx. 60 kg more
5
Ring blower, side channel blowers, vacuum pump, centrifugal blower Dv3ydygji Drive 4,3 kW -Fördermenge m³/h -Max vacuum mbar Speed RPM/2915 510/635/H420 dimensions mm Weight 53.5 kg more
3

Channel type holding furnace 55/40 t ABB LFR 30

Iserlohn, GermanyGermany dealership location
6437 km
1989
used
Mainly consists of: - furnace body with inductor and tilting chair with hydr. cylinder - hydraulic unit with control desk - three-phase-oil-stepdown-transformer 850 kVA - 20.000 +/- 5 % / 180 …780 V / 8 steps - transformer with fixed steps - electr. switchboard and control panel - without re-cooling plant 9aa8gawsl - spare inductor already dismantled more
1

Vibratory channel (18 m) + screen area 1800/60/S

Bielefeld, GermanyGermany dealership location
6462 km
1980
used
Vibratory channel (18 m) + screen area SMA-REF-6064 Type: sawmill conveying, pushing, dumping Manufacturer: Esterer Model: 1800/60 / S Year: 1980 Working range: Length: 18 m Width: 0,60 m Features: Screen area (4,5 m) at the end Condition: ready for action D7pusblyi Location: Western Germany Availability: on demand Terms of delivery: ex works Terms of payment: 100% before dismantling/loading more
6

Channel baling press Presto GmbH & Co. KG HPK 20/40 S

Gutenbergstraße 22, 28816 Stuhr bei Bremen, DEGermany
6434 km
2003
ready for operation (used)
Manufacturer: Presto GmbH & Co. KG Type: HPK 20/40 S Year of construction: 2003 Operating hours: 6363 h Press power: 40 t Motor power: 22 kW Cycle time: 18 s Feeding opening: 700 x 1200 mm Channel cross-section: 700 x 750 mm Throughput rate with 35 kg/m³: 3,5 t/h Throughput rate with 60 kg/m³: 5,2 t/h Throughput rate with 100 kg/m³: 7,5 t/h Bale weight: Up to 400 kg, depending on material Binding: 3-fold vertical, automatically Dimensions: 6750 x 1350 x 2350 mm (L x W x H) Machine... more
4
Horizontal channel baler HSM AK 10/900 Used machine Pressure: 12 tons Ba8bwqujwd Price: 5700 Euros (net price) Technical description of the machine: Pressure: 12 ton Engine: 6.8 kW Bale dimensions: 600 x 500 x 400 Inlet opening dimensions: 600 x 900 3 months guarantee! Machine is ready for selling! In case of questions, please contact us! more
2

Side channel blowers vacuum pump

Wiehl, GermanyGermany dealership location
6452 km
2005
as good as new (ex-display)
Power: 5.5 kW 080lcah38 more
5
Ring blower, side channel blowers, vacuum pump Vmnrlvqbm Drive 0.3 kW -Fördermenge m³/h -Max compaction pressure mbar Speed 2800 RPM -2 x pumps available Award pieces Dimensions 260/260/H280 mm Weight 9 kg more
3
Consisting of: Furnace body with inductor 800kW, tilting system, 2 hydr. cylinder, hydraulic unit with control desk, three-phase-step-down-transformer; 850kVA; 10kV electr. switch-board and panel spare Inductor 800 kW without water re-cooling plant Cnueae0p the furnace is in excellent condition already dismantled more


channel
daily

New machines via email!

Stay updated!

to

to

Edit search
CHANNEL
SELL IMMEDIATELY
with Europe's market leader for as little as € 0,49 per ad.
Find out more


Phone: +1 312 94 04 581
or sell immediately
Try our Machineseeker app now!
Machineseeker app for iPhone and Android.
Want to really stop the chat history?
Yes No
×
Machineseeker chat
Name E-mail Your message to the Dealer
START CHAT WITH DEALER
  You are chatting with: 
  Your contact person: 
  
Your contact is typing
SEND MESSAGE
  You are chatting with: 
  Your contact person: 
  
Your contact seems to be inactive
Chat window close