Used Channel for sale (923)

Condition: good (used), Year of construction: 2005, 3 pieces Carton strapping machine, Mosca, RO-TR 700-4, fully automatic - second-hand - : Codpfx Acjq Tr Sljperh Price per piece ex location: only 3.950.-€ (net)!!! Manufacturer: Mosca Type: RO-TR 700-4 Year of construction: 2005 The machines currently work with 9mm belts Channel width: approx. 72cm Channel height: approx. 54cm No.: 80527 etc. 3L-N-PE 400V, / 3 AC 1.5 kW / 50 Hz 2,5 A Control voltage: 24V, DC Condition: good Available: immediately Location: Hanau area

Condition: ready for operation (used), Pilz C-P8-ZE-2U central unit, 2-channel: 306092, used, shows normal signs of wear, 100% functional, scope of delivery as shown in the photos. Crjdpfx Aji Eclnjcpeh

Year of construction: 2002, condition: good (used), Complete Desoutter screwdriver system consisting of: 1 x Transducer controlled angle screwdriver Desoutter ERA40J Art.Nr .: 6151650800 Torque range: 8 to 40 Nm Output: 3/8 " Number of revolutions. 900 min-1 Length: 458 mm Weight: 2.1 kg 1 x Transducer controlled angle screwdriver Desoutter ERA60J Art.Nr .: 6151650810 Codpfx Asdcmizocpsrh Torque range: 15 to 60 Nm Output: 3/8 " Number of revolutions. 570 min-1 Length: 469 mm Weight: 2.2 kg 1 x screw control Desoutter MODCVI-2 (= rack version of TWINCVI-2) with transformer. Art.Nr .: 6159325210 Screw - on cable: 2 Number of screw cycles per channel: 250 Number of phases in a screw cycle: 20 IO Sum counter: 99 Screwdriving Bins: Moment + Angle + Date + Time + Result + (bar code): up to 11600 Screws: 6 Moeliche screw strategies: Torque control with angle control Rotation angle control with torque control Dremoment- / Drehwinkelsteuerung Torque control with rotation angle and gradient control Rotation angle control with torque and gradient control Stretch control Hold torque / position Friction torque test Electricity compatibility 2 x motor cable for hand screwdriver 5 m length Art.Nr .: 6159170720 1 x Sensor cable length 5 m Art.Nr .: 6159171220 Including operating instructions

Condition: good (used), Container rotating device, welding rotating device, roller stand, rotators, pipe straightening system -Pipe straightening system for: steel pipes, with flame and water cooling Flame straightening -Drainage channel and water pump -Roller diameter: Ø 180 mm -Drive: PIV gearbox -electrically adjustable -Load capacity: 1 ton -Speed: min. 50 mm/min -Speed: max. 150 mm/min -Manual switch -Counter bearing: laterally adjustable -Drive dimensions: 3600/820/H850 mm Crjdpfx Ascp Nvyjcpoh -Dimensions of counter bearing: 2950/820/H850 mm -Empty weight: 1300 kg

Condition: good (used), Year of construction: 2005, machine/vehicle number: HSL 1500-8-12/8 GB, type of input current: AC, volume flow: 2,500 m³/h, filter area: 33 m², Dust filter herding with modular fan Technical data: Power consumption 1x15 kW option 2nd 15kw Cedpfx Acjvz Az Iepjrh Filter is supplied with 1 side channel fan 2nd side channel fan is optional. Filter surface 33 m² Dust container capacity 40 litres Weight 660 kg Suction connection 2x 160mm Operating volume flow: 2500 m³/h Operating mode: Continuous operation Cleaning: compressed air Compressed air connection must be available side channel fan: brand: Effepizeta Type: SCL K10-TS Power: 15kw Speed: 2908 rpm

Condition: like new (used), Year of construction: 2019, operating hours: 20 h, functionality: fully functional, machine/vehicle number: 65487, Equipment: documentation/manual, For sale is an Innomatec LTC-802 M Leak Test Computer in like-new condition, from our company’s inventory. The device was factory-calibrated by Innomatec in 2026 and will be sold including a current factory calibration certificate. According to the manufacturer, there are currently no restrictions regarding service or spare parts availability. Manufacturer: Innomatec Mess und Schnellanschluss Model: LTC - 802 M Year of manufacture: 2019 Condition: like new Category ID: 404 Type ID: 2224 Type: Measuring system Technical data Manufacturer: Innomatec Model: LTC-802 M Year of manufacture: 2019 Mass flow method Pressure range: 0.05 to 5 bar Single-channel leak test device Configurable testing system Suitable for large-volume components Factory calibration 2026 Scope of delivery: Innomatec LTC-802 M Original power supply Accessories as shown in the photos Factory calibration certificate Operating instructions (as shown in the photos) Cedezltyfopfx Acporh Application areas Automotive industry Medical technology Industrial manufacturing Quality assurance Leak testing Automated production systems Condition Like-new condition Factory-calibrated by Innomatec (2026) Completely cleaned Ready for immediate use Note: The photos of the current factory calibration certificate are part of the listing and can be found in the attached images. Sale is made by a company with an invoice. Inspection possible by appointment. If you have any questions or need more information, please feel free to send us a message or call us.

Condition: excellent (used), Year of construction: 2010, operating hours: 40,000 h, functionality: fully functional, Used Tornos MultiSigma 8/24 Year 2010 40,000 operating hours Chip conveyor Crodpfxezpxk Rj Acpjh Robobar MSF-522-8 bar feeder, year 2010 Chip conveyor High-pressure pump Kraft and Bauer fire suppression system Machine in very good condition with dual pick-up Set of collets Set of bar feeder channels

Condition: used, mileage: 43,602 km, power: 110 kW (149.56 HP), first registration: 10/2022, fuel type: diesel, overall weight: 3,000 kg, next inspection (TÜV): 11/2026, color: silver, gearing type: automatic, emission class: euro6, number of seats: 3, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, Vehicle number (for inquiries): 143-T MERCEDES-BENZ SPRINTER 215 HIGH + LONG Paint code: * 9775 Paint color Iridium Silver MB 9775 Interior: * Fabric, black Equipment: * 9775 Paint color Iridium Silver MB 9775 * BH1 Hold function * BH8 Control code, hydraulic aggregate variant 7 * BK2 Control code, wheel brake configuration 2 * C6L Multifunction steering wheel Csdpfezp A Exsx Acpsrh * C910 - * CL1 Steering wheel adjustable in inclination and height * D03 High roof * D50 Fixed partition * E07 Hill-start assist * E1D Digital radio (DAB) * E3M MBUX multimedia system with 7-inch touchscreen * ED4 Fleece battery 12 V 92 Ah * ES0 Jump start contact * ES5 Charging package, instrument panel * EW6 Pre-wiring for Remote Services Plus * EY5 Mercedes-Benz emergency call system * EY6 Breakdown management * F64 Exterior mirrors, electrically foldable * F68 Exterior mirrors, heated and electrically adjustable * F910 - * FG8 Cup holders, front * FJ4 Stowage compartment under dashboard * FKA Box van * FY7 Multi-button remote control * FZ9 Two main keys additional * GK8 9G-TRONIC * HH9 Semi-automatic climate control system Tempmatic * HI1 Climate zone 1 (cold/comfort) * IC1 Model series C907/C910 Sprinter * IF0 Model series C910 VS30 Fwd * IG4 Standard * IG5 Basic * IH6 Head unit ECE/ROW * IK0 Complete vehicle * IL1 Domestic (Germany) * IL5 Left-hand drive * IL6 Metallic paint * IS3 Wheelbase 3924 mm (code for basic model) * IT3 3.0-tonne * J0V Pre-wiring for blind spot assist * J10 Speedometer km/h * J55 Seatbelt warning system for passenger seat * J58 Seatbelt warning system for driver seat * J65 Outside temperature display * JA8 Crosswind assist * JB7 Parking package with reversing camera * JH3 Communication module (LTE) for digital services * JI6 Start-up sequence, maintenance interval 40,000 km * K12 Main tank 65 liters * KP7 Exhaust gas purification SCR Generation 4 * L Left-hand drive * L94 Parking light deleted * LA2 Headlamp assist * LB5 3rd brake light * LE1 Adaptive brake lights * LX5 Europe * M40 Generator 14V/200A * M72 Vehicle capable of running on HVO fuel * MJ8 ECO start/stop function * MT6 Emissions class Euro 6D N1 * MU3 Engine OM654 DE 20 LA 110 kW (150 hp) * P2M Parking assist package * Q11 Longitudinal member reinforcement * RN5 Tires 225/65 R16 C * RS3 Steel wheels 6.5 J x 16 * RX5 Wheel manufacturer Maxion Wheels * S02 Driver's seat * S22 Armrest for driver's seat, ISO-fix (child seat attachment system) * S23 Passenger seat, double seat * SA5 Airbag, driver * SK2 Seat occupancy recognition for driver's seat * T16 Sliding door, right * T77 Grab handle, entrance to cargo compartment, sliding door, on partition * T86 Grab handle on rear corner pillar, right * V94 Conductor channel on side wall * V95 Conductor channel on rear portal * VA3 Interior lining, cargo compartment up to roof height, washable * VF7 Fabric Maturin, black * VK8 Floor covering, plastic * WB9 Control code, factory * WM2 Control code, factory * WM3 Control code, factory * WM9 Control code, factory * WN2 Control code, factory * WZ7 Control code, factory * X30 Vehicle registration document part 2 * X3G Weight variant 3,000 kg * X99 Manufacturer Mercedes-Benz AG * XC9 COC documents * XI2 Model year G2-I * XM1 Noise reduction measure * XO9 Mercedes-Benz Mobilovan with DSB and GGD * XU1 Signage/printed material, German * XV0 Control code - BZM test

Condition: as good as new (ex-display), functionality: fully functional, power: 22 kW (29.91 HP), color: yellow, input voltage: 400 V, input frequency: 50 Hz, rotational speed (max.): 98 rpm, rotor diameter: 300 mm, The LR1000 is particularly distinguished by its high reliability and excellent performance. The most well-known models of the LR series are particularly popular for demanding applications where high throughput is required. Further technical data: Cutting head opening: 1000x1050 mm Hopper volume: approx. 1000 liters Drive power, conveyor screw: 0.55 kW Elastic belt drive Drive power, hydraulics: 1.1 kW Dimensions: 1761 x 1630 x 1704 mm Gearbox Design: 2-stage spur gear gearbox in an oil bath for low maintenance Cutting head Csdpfezmh Efex Acperh Number of cutting tools: 27 Optional equipment Machine housing in a 45° design Extension of the conveyor screw channel by 400 mm with downward discharge for LR1000 with 25 mm perforated screen 4x adjustable machine feet for LR1000 with vibration dampers Light barrier in the lower machine housing 1x control element, external, with start/stop and emergency stop buttons 2x emergency stop contacts including relay Industrial horn 230 V AC

Condition: used, TECHNICAL DETAILS Crsdpfezr Rutox Acpsh - Bar diameter : 23 [mm] - Bar length : 3200 [mm] POWER SUPPLY - Supply voltage : 400 [V] WEIGHT & DIMENSIONS - Machine floor space : 4080 x 1200 [mm] - Machine height : 1750 [mm] - Machine weight : 830 [kg] EQUIPMENT - Channel diameter : 24 [mm] - Pushcart diameter : 23 [mm]

Condition: excellent (used), Double Vibratory Feeder / Positioner – Length 3.40 m – Stainless Steel Industrial double vibratory feeder/positioner, designed for feeding, distributing, orienting, and controlled transferring of products to the next stage of an automatic processing or packaging line. The unit incorporates two independent vibratory channels, each driven by its own vibration system, allowing the product to be distributed in a progressive and regular manner. This principle is particularly useful for preventing accumulation and achieving a more uniform feed to downstream equipment. With an approximate length of 3.40 m, the equipment features a robust industrial construction, primarily in stainless steel, suitable for professional lines in the food industry. MAIN FEATURES -Type: Double vibratory feeder / positioner Csdpfx Aszxmf Uscpjrh -Approximate length: 3.40 m -Configuration: Double vibratory channel -Two independent feeding systems -Driven by electric vibrators -Controlled product distribution -Advancement by vibration -Continuous and uniform feeding -Positioning / orientation function depending on the product -Construction primarily in stainless steel -Open channels for easy access -Robust support structure -Design for continuous industrial operation -Suitable for integration into automatic lines -Can be used as a buffer between different stages PROCESS The product is received in the feed channels and, through the action of the vibratory motors, advances progressively along the equipment. The vibration allows the product to be distributed and spaced, providing a more regular feed to the machine located downstream. The double configuration allows the flow to be divided into two independent paths, which is particularly interesting when it is necessary to feed two inlets simultaneously, distribute a production, or improve the distribution of the product before a subsequent operation. It can be integrated with: Elevators Receiving hoppers Selection and sorting systems Slicers Weighers Dosers Fillers Packagers Conveyors Complete processing lines APPLICATIONS Especially suitable for food industries, fruit and vegetable processors, frozen food products, and packaging lines that need to regulate, distribute, or position the product before another machine. Depending on the configuration and characteristics of the product, it can be used with different solid or particulate products compatible with vibratory feeding. The combination of a double channel, 3.40 m in length, and independent vibratory drive provides a practical solution for achieving a continuous and organized feed within industrial lines. Machine available for inspection. Additional technical information, dimensions, additional photographs, or videos can be provided upon request.

Condition: good (used), Year of construction: 2017, V304 plate processing machine (including 1 gantry beam(s) of 6.500mm and side trucks) ◼ This V304 plate processing machine is capable of processing plates up to 3.050mm x 18.000mm for bevel plasma cutting and marking (needle marker, if attached) and 4.100 x 18.000 mm for oxy-fuel cutting and marking (needle marker, if attached) ◼ X-rail (21.000mm on both sides of the machine, including double linear guides, helical rack and pinion system and rubber covering band) ◼ Plasma cutting and extraction table (4.300mm x 18.720mm, 2 channel(s), 1 pcs, suitable for ≥ 350A cutting) ◼ Position 1: Plasma cutting unit Kjellberg SmartFocus400 (1 pcs, automatic gas console, complete with cutting parameter database) ◼ Plasma 3D bevel unit (1 pcs, including 5 NC-axis, Voortman height control, intelligent torch positioning system and 3D collision sensor, for x- ,y- , k- and v-weld preparations) ◼ Driven suspension (1 pcs, servo motor driven, including laser pointer) ◼ Dross inhibitor (1 pcs, including 1,2L reservoir) ◼ Arc Glare protection (1 pcs) ◼ Position 2: Plasma cutting unit Kjellberg SmartFocus400 (1 pcs, automatic gas console, complete with cutting parameter database) ◼ Plasma 3D bevel unit (1 pcs, including 5 NC-axis, Voortman height control, intelligent torch positioning Cjdpfxevpalao Acpsrh system and 3D collision sensor, for x- ,y- , k- and v-weld preparations) ◼ Dragged suspension (1 pcs, with automatic addressing) ◼ Dross inhibitor (1 pcs, including 1,2L reservoir) ◼ Arc Glare protection (1 pcs) ◼ Position 3: Oxy-fuel cutting torch 4.0 (1 pcs, automatic gas console, ignition and piercing, complete with cutting parameter database) ◼ Voortman height control (1 pcs, capacitive height control) ◼ Dragged suspension (1 pcs, with automatic addressing) ◼ Position 4: Oxy-fuel cutting torch 4.0 (1 pcs, automatic gas console, ignition and piercing, complete with cutting parameter database) ◼ Voortman height control (1 pcs, capacitive height control) ◼ Dragged suspension (1 pcs, with automatic addressing) ◼ Position 5: Oxy-fuel cutting torch 4.0 (1 pcs, automatic gas console, ignition and piercing, complete with cutting parameter database) ◼ Voortman height control (1 pcs, capacitive height control) ◼ Dragged suspension (1 pcs, with automatic addressing) ◼ Cables high instead of low ◼ Donaldson fume extraction unit DFO 4-48 - 200L (incl. frequency controller) ◼ Air conditioning for switch panel (up to an ambient air temperature of 55°C) ◼ Hardware and software (includes VACAM ‘Machine Edition’, VACAM ‘Office Edition’, VACAD editor software module, VANEST nesting software, Layout marking software module, online support) ◼ Post processor for SigmaNEST (SigmaNEST is provided by the customer) ◼ Safety devices (safety bumpers, emergency stop cord)

Condition: new, *IMMEDIATELY AVAILABLE* Includes: H-frame, railing Equipment: - Welded frame - 6 lashing points - H-frame at the front Net: €2,079.83 / Gross: €2,475.00 Article number: AZL113251337.01 Technical data: • Brand: Hapert Trailers • Model: Azure L-1 • Vehicle type: Box trailer • Vehicle condition: New vehicle • First registration: without first registration • TÜV/HU: 2 years from first registration • Internal dimensions (LxWxH): 250 x 130 x 37 cm • External dimensions (LxWxH): 382 x 178 x 132 cm • Loading height of the floor: 54 cm • Permissible total weight: 1,350 kg • Unladen weight: 330 kg • Payload: 1,020 kg • Chassis: Low loader (wheels next to the body) • Tires: 185R14C • Suspension: KNOTT rubber spring axle • Support wheel: Yes, automatic, 500 kg • 100 km/h approval: Optional, can be retrofitted DESCRIPTION • Aluminum side panels, anodized with profile channel on the outside • Accessories such as tarpaulin buttons, hooks, or ring eyes can be mounted with hammer-head screws without drilling. • Screen-printed wood floor, continuous without joints, non-slip, and waterproof • Rear tailgate made of aluminum in the proven Hapert design • Side panel retaining ropes on the rear tailgate • Hinges for the rear tailgate welded to the frame • Stable eccentric locks for the rear tailgate, recessed in the side panel profile • Very stable steel frame, welded • Frame completely hot-dip galvanized • Reinforced, stable, bolted V-drawbar • Steel fenders • Option to insert at all 4 corners for tarpaulin frames, lattice attachments, side panel attachments, or front wall extension • Many stable cross members, resulting in high point load capacity • Lateral side panel struts welded (increased lateral stability) Crsdjzu N Rxspfx Acpeh • H-frame at the front, removable (front wall gallery) • Hole railing on three sides, 6 cm (Combi Protect Rail), also usable with locking bars and lashing straps - round holes 25 mm, elongated holes 54x25 mm • 6 lashing eyes recessed on the inside in the side edge (1000 DaN/kg), TÜV certified! • Maintenance-free rubber spring axle from KNOTT • Reversing automatic • KNOTT overrun device and parking brake • 13-pole plug • Reversing light • Large-dimensioned safety lighting • Integrated rear fog light • Lighting recessed in the rear frame • Automatic support wheel in the center _____ Accessories can be retrofitted by our specialist workshop!! - Please feel free to ask about any specific requests! _____ - Financing or leasing possible - Nationwide delivery possible - All prices include VAT - Vehicle registration document can be sent in advance, or temporary registration plates (Germany) can be provided. - Export registration plates including customs registration possible Descriptions and images are subject to copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist dealer & repair - workshop for over 30 years. - Errors, omissions and prior sale excepted -

Condition: new, Year of construction: 2026, Motor power: 7.5 kW - Cutting force: 30 tons Cutting channel designed for: - Maximum roll length: 1500 mm - Maximum roll diameter: 1250 mm - Machine weight: approximately 3800 kg Cedpfx Acoltmi Sopjrh - Tank capacity: approximately 110 liters - Hand protection grille in the area of the control panel and on the opposite side - Knife locking mechanism - Straight design slitter table - Documentation: 2 copies in German (1 printed, 1 on USB) - Color: RAL 5012 - light blue Protective grille/knife beam: RAL 1028 - melon yellow Machine in stock, immediately available Price and further information upon request.

Condition: ready for operation (used), Year of construction: 2006, input voltage: 400 V, number of axes: 4, controller manufacturer: Masterwood, overall weight: 3,800 kg, Masterwood Projekt 415 4 axis CNC machine Cjdpfx Aozv S Suecperh Working area 3200 x 1335 4 working fields ISO30 10.5 HP spindle C-axis Toolchanger 12 positions 6 supports Schmalz double channel Vacuumcups 17" screen Drillinghead 16 spindels (horizontal and vertical) Machine in working condition Pneumatic lifters Vacuümpump Becker Fence left, right and back Safety mats in the front (not checked) WIndows control Masterwork CAD-CAM system Available from 31 of August 2026 Price on request

Condition: used, Lumsden 93 ML Vertical Spindle Rotary Surface Grinder, fitted with 60 inch dia magnetic chuck. Available for immediate supply. Full rebuild, all new Bearings, feed unit rebuilt, new main motor, drive belts, new H/D coolant tray, new panel inc electronic mag unit, Pilz 2 Channel safety switch circuit, door interlocks with motor rundown sensor incorporated, new oil/grease pipework. Crsdpezlkd Usfx Acpoh

Condition: excellent (used), functionality: fully functional, ABB Robotics IRB 6600 Robot 1 x ABB Robotics IRB6600 robot, serial number 66-68813 1 x ABB Robotics IRB6600 robot, serial number 66-68814 1 x ABB Robotics IRB6600 robot, serial number 66-68815 1 x ABB Robotics IRB6600 robot, serial number 66-68816 The IRB 6600 is a powerful 6-axis industrial robot for demanding applications that require flexibility, reach, and reliability. It is available in various configurations and supports payloads from 125 kg to 225 kg with arm lengths of up to 3.2 m. This makes it versatile for use in production environments. Its rear-inclined geometry enables improved accessibility and space-saving integration, especially in machine tending, spot welding, and material handling. The robot features advanced safety technologies such as collision detection, active braking, and path stabilization through the ABB TrueMove and QuickMove systems. Integrated monitoring tools support predictive maintenance, while the robust, IP67-certified design and reinforced structure make it suitable for harsh industrial environments. Note: The IRB 6600 model is no longer manufactured. Service and spare parts are still available for existing installations. Codpezm E Rrefx Acporh -Payloads from 125 kg to 225 kg, reaches from 2.55 m to 3.20 m. -Rear-inclined design for better access and compact integration. -Equipped with active/passive safety: collision detection, path guidance, dual-channel stop. -Integrated load/motion monitoring for preventative maintenance. -0.1 mm repeatability and full IP67 protection for harsh environments. Maximum payload (kg): 225 Maximum reach (m): 3.2 Applications Spot welding, machine tending, material handling Mounting: Floor Environment: Foundry, standard industry Used item – normal signs of wear and tear. Further details, article numbers, and images available upon request. "Sample photos. The actual product may vary." Two-week commissioning guarantee. No further warranty. Spare parts are constantly available in stock. The robot is fully functional and can be inspected upon request. Free loading / ex works. The stated amount is net and applies per robot. The legally required VAT of 19% will be added at checkout. You will receive a proper invoice with VAT shown. Collection on site in 74722 Buchen/Hainstadt. Shipping or forwarding costs vary depending on the number of items, weight, and desired delivery conditions. Shipping costs abroad on request – please specify country, city, and postal code. Forwarding costs on request – please specify delivery address.

Condition: new, Year of construction: 2026, functionality: fully functional, StoMill 1000 – Our cost-effective root reducer for automated processing. Our StoMill 1000 is a compact root reducer for the reliable processing of roundwood with diameters up to 1,200 mm and log lengths up to 20 m. In addition to the reducing operation, logs can also be debarked through manual repositioning; an optional automatic repositioning device is also available. The logs are fed using a forklift or crane. An 8-channel radio remote control is available for operation, enabling simple, automated control. This makes the StoMill 1000 particularly suitable for smaller to medium-sized woodworking operations. The advantages of the system at a glance: Low operating costs with the same reducing result due to extremely low drive power of 15 kW Option: Reducing shaft with 22 kW drive power Low power consumption and, above all, hardly any expensive peak power All systems with patented safety blade shaft Fully automatic sequence of the reducing process Radio remote control with 2 programs and control of the clamping device and ejector The log can be repositioned several times and thus, if required, also completely debarked Optional with automatic repositioning device Carrier discs for log rotation with a wide, grippy support surface including lateral protective cover Wear-resistant carrier disc drive Practical chip box Since the chips are very short, they can be burned immediately in the wood chip system All systems with control cabinet and oil tank heating, therefore unrestricted operation even at sub-zero temperatures. Safety device, CE approval including declaration of conformity The following questions are important to us: What log lengths do you process? Do you want to reposition the logs or perhaps also debark them with the reducer? With what device (gripper, forklift, etc.) are the logs placed on the reducer? Credjztapvjpfx Acpeh Should the logs be automatically ejected after the reducing process? How should the system be set up to achieve an optimal workflow? How high should the system be? Is a conveyor system for the removal of the bark advantageous? Is an automatic log feed required for repositioning? Should an automatic transfer of the log to another machine take place? Based on these questions, we determine the optimal position of the reducing shaft, the length of the machine, and the necessary technical equipment. Our modular system allows for a precise adaptation of the root reducer to your specific application.

Year of construction: 2014, condition: good (used), High-performance fan, Zenner, type VTZ 710/63/1 Special, year of manufacture 2014, consisting of a control cabinet, frequency converter, and cell gate. Technical data Cjdjzt Imcspfx Acpsrh Manufacturer: Zenner Ventilatoren Type: VTZ 710/63/1 Special Year of manufacture: 2014 Volume: 4.72 m³/s Maximum temperature: 80°C Density: 1.2 kg/m³ Total pressure: 5,000 Pa Speed: 2900 1/min Motor: 55 kW Voltage: 400/690 V / 50 Hz Weight: approx. 800 kg The fan is designed for the transport of paper/cardboard, during which the material is also shredded. The machine is in good condition. It has been inspected and tested by us in 28816 Stuhr. You can find the video on our website or our YouTube channel. Inspections, including with the machine running, are possible at any time by arrangement. Video calls are possible upon request. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or any errors. The offers are subject to change, prior sale, and may be revoked at any time. Inspections are possible by arrangement. The sale takes place from our location, without any warranty.

Year of construction: 2012, condition: good (used), Separator sluice / cell wheel sluice Nestro, year of manufacture 2012, for the separation / differentiation of paper chips or paper edge sections. Technical data: Manufacturer: Nestro Lufttechnik GmbH Year of manufacture: approx. 2012 Motor: 4 kW Volume flow rate max. 28000 m³/h Inlet diameter max.: 450 mm Speed: 22 rpm Rotor width: 1500 mm Rotor diameter: 1200 mm Dimensions: 2200 x 2200 x 2500 mm (L x W x H) Weight: approx. 3000 kg Note: The machine is in good condition. It was inspected and tested by us in 28816 Stuhr. The video can be found at the top of our website or on our YouTube channel. Inspections, including under power, are possible at any time by arrangement. Codpfezt Ipksx Acporh Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or for any errors. The offers are non-binding, subject to prior sale, and can be revoked at any time. Inspections are possible by arrangement. The sale is made against advance payment, ex works, without any warranty.

Condition: excellent (used), MECALSA Continuous Industrial Fryer with Thermal Oil – Stainless Steel MECALSA continuous industrial fryer with a thermal oil heating system, designed for the continuous frying of food products in medium and high-capacity production lines. The equipment features a longitudinal process tank and a transport system that allows the product to remain in the oil for a controlled residence time. Indirect heating via a thermal oil circuit provides the necessary energy to the process while keeping the thermal fluid separate from the frying oil. Its construction, primarily in stainless steel, along with vapor extraction and process control systems, makes it particularly suitable for professional installations in the food industry. MAIN FEATURES -Manufacturer: MECALSA -Type: Continuous industrial fryer -Heating system: thermal oil -Continuous frying process -Longitudinal frying tank -Automatic product transport -Adjustable residence time depending on configuration -Circulation and control of frying oil -Independent thermal oil circuit -Indirect heat exchange -Temperature control -Piping and valve system -Vapor extraction system -Extraction hoods and ducts -Control electrical panel -Construction primarily in stainless steel -Industrial structure for continuous operation -Access points for inspection, cleaning, and maintenance -Integrable into automatic processing lines PROCESS The product is continuously fed into the MECALSA fryer and guided through the frying zone by the internal transport system. During this process, the product remains in contact with the frying oil at a controlled temperature for the time needed to achieve the required final characteristics of cooking, color, and texture. Heat is supplied through a thermal oil circuit, which transfers energy to the system without directly mixing with the oil used for frying the product. The vapors generated during frying are collected by the hoods and channeled to the extraction system. APPLICATIONS Codezxwxxjpfx Acporh Especially suitable for manufacturers of pre-fried products, processed vegetables, potatoes, snacks, breaded products, and other food preparations that require a continuous frying process. Depending on the installed configuration, it can be used for: Potatoes and related products Vegetables Breaded or battered products Prepared meat products Fish and fish products Snacks Pre-cooked products Other specialties compatible with continuous frying It can be integrated with feeding systems, scalding units, dryers, conveyors, excess oil removal systems, coolers, IQF freezers, and packaging equipment. The combination of MECALSA technology, continuous process, and thermal oil heating provides an industrial solution for lines requiring uniform and controlled frying. Machine available for inspection. Additional technical information, production capacity, operating temperatures, dimensions, additional photographs, or videos can be provided upon request.

Condition: used, Year of construction: 2010, “Cleaning in Place” (CIP) system, consisting of the following components: - 400-liter stainless steel tank serving as a hydrostatic circulation tank - 7.5-kW feed pump (Packo) for pumping 25 m³/h against 4.1 bar - 4.0 kW return pump (Packo) for pumping 25 m³/h against 2.0 bar - Shell-and-tube heat exchanger (Weinbrenner) for heating a flow rate of 25 m³/h from 55 °C to 75 °C with 790 kW - 4-channel chemical dosing system (ProMinent) for lye, acid, disinfectant, and additive - Temperature measurement - Conductivity measurement (E+H) - Inductive flow meter (E+H) - Control cabinet with touchscreen display - Various piping and valves Additional title: Cleaning system for cleaning pressurised tank cellars Volume circulation tank: 400 l Length: 2,5 m Width: 3,0 m Height: 2,9 m Cjdpfx Acoztwu Ajperh Operation / Control: Simatic S7 Material: contact surfaces from stainless steel Position: on stainless steel frame with feet Features: Circulation tank; 2 centrifugal pumps; shell-and-tube heat exchanger; 4-channel chemical dosing system; control cabinet with touch panel; flow measurement; conductivity measurement; temperature measurement; various pipes and valves

Condition: used, maximum load weight: 32,090 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 01/2023, next inspection (TÜV): 01/2027, loading space volume: 30 m³, total width: 2,550 mm, total height: 3,685 mm, Year of construction: 2023, Equipment: ABS, Kässbohrer Tank Trailer STC 30 Code L4BH, for chemicals First registration: 01/2023 German registration, from first owner Approximate unladen weight: 6,910 kg Cjdpjzkybmsfx Acporh Stainless steel chassis, highly polished BPW axles with large disc brakes, 430 mm 1st axle: lift axle Crank-operated support legs, steel, for full load 6 tires, size 385/65 R 22.5, tread depth 70 to 80% Aluminum rims KNORR trailer EBS Tank: 30,000 liters, made of stainless steel 1.4571 AISI 316 Ti Operating pressure: 3.0 bar / Test pressure: 4.0 bar Insulation: 100 mm glass wool 1 compartment with 3 bulkheads 4 manhole covers 1 venting valve, Fort Vale 1 safety valve 1 check valve Air line on the right side, DN 50, with TW 50 connection at the front right Heating preparation for 4-channel hot water 1 outlet, DN 100, uninsulated, with sampling tap at the rear right and TW 80 coupling 1 purging device Pneumatic bottom valve Hoses, left and right, DN 150, approx. 6 m long RENTING is the new BUYING; with us, it is also available as a full-service rental.

Condition: good (used), Approx. 8 units of mobile flow rack shelving from Creform, FiFo system, assembly frame with flow levels – used: Price per unit, ex works: €400.00 (net)! Manufacturer: Creform Type: Pipe and joint system Year of manufacture: unknown Crjdpfx Aozp Rn Iecpjh Dimensions: approx. 180x180x200cm 2 channels 9 swivel casters with brakes Roller rails Condition: good Available: immediately Location: Leipzig

Condition: used, Year of construction: 2008, functionality: limited functionality, power: 150 kW (203.94 HP), nominal heat output: 250 kW (339.91 HP), heating capacity: 220 kW (299.12 HP), Fixed-bed wood gasification plant from Urbas. The system is operational. Scope includes engine and generator. The engine requires an overhaul. Also included is a valid EEG feed-in contract at 21.6 cents/kWh until 2028. A comprehensive stock of spare parts, such as side channel blowers, sensors, and pumps, is included. A second unit is provided as a parts donor. Crjdpfeyyzv Tsx Acpoh