Used Tube Processing for sale (22,579)

Condition: good (used), total width: 2,300 mm, total length: 7,800 mm, total height: 2,250 mm, overall weight: 15,000 kg, Manufacturer: AXA Type: HFB 600 Control: Siemens 840D Solutione Line Year of manufacture: 2015 Specifications Metric US Standard There are (currently) no specifications for this machine. Dimensions (Estimated) Length: 7800 mm Width: 2300 mm Height: 2250 mm Weight: 15000 kg Dwodpfxot Tdp Ts Aared Please note: The information on this page has been provided by us to the best of our knowledge and belief, and, where possible, obtained from the manufacturer. The information is provided in good faith, but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contractual obligation. We recommend that you verify all important details. Finishing of sealing surfaces: The finishing of the sealing surfaces of the approximately 17m long tubes is performed by an NC-controlled feed unit and an NC-controlled facing slide with 2 ABS tool holders for either lathe tools, measuring sensors, or measuring probes. The workpiece is first measured via the measuring sensors in the slide heads and aligned by the adjustable roller supports. The tube is hydraulically tightened into position by the floating chuck once it is at a right angle and centered to the facing slide head. The interchangeable measuring sensors calculate how to process the surface.

Condition: used, Year of construction: 2020, operating hours: 14,167 h, functionality: fully functional, Lasertube machine ADIGE LTB.20. Base module. Machine integration for FIBER laser source with 3D head, TubeCutter, and Active Focus. Dsde Aikylspfx Aarswd Automatic bundle loader for tubes with 2500-6500 mm length. Bundle loader FIBER safety covers. Installation of the bundle loader on the front side. Pushing device for tubes on standard packs for the bundle loader. Automatic loader for single bar with 2500-6500 mm length. Front installation side. Single bar loader FIBER safety covers. Installation of the automatic loader for single bar. Loading portal main module. 6500 mm length loading portal module with four carrying arms. Loading portal FIBER safety covers. Discharge module for 4500 mm cut tube length. Discharge module FIBER safety covers. 6500 mm length complementary discharge module for the front side and 3400 mm length for the rear side. Complementary discharge module FIBER safety covers. In-line discharge system. 2000 mm module extension for the in-line discharge system. Discharge system FIBER integration. Parts collecting table, 3400 mm base module. Base module parts collecting table on the machine's rear side. Machine integration for IPG fiber laser source. IPG YLS-4000 fiber laser source. Chiller with closed circuit for the laser source. Fume extractor (D). Optical device for weld seam identification and orientation. Active piercing: drilling process control and optimization device. Active Scan device. Active Weld. Two webcams, for the rear loader and for the cutting area.

Condition: good (used), functionality: fully functional, Year of construction: 2009, pipe diameter (max.): 60 mm, pipe length (max.): 6,000 mm, bending radius (max.): 200 mm, bending radius (min.): 35 mm, overall weight: 4,400 kg, input current: 63 A, input frequency: 50 Hz, Equipment: CE marking, documentation/manual, emergency stop, We are offering this used Dynobend DB60 tube bending machine, manufactured in 2009. Manufacturer: Dynobend Type: DB60 Machine number: 2009-11-B789 Year of manufacture: 2009 Weight: 4,400 kg Dwedpfx Ae Ahiuaeared Voltage: 230/400 V Frequency: 50 Hz Connected load: 40 kVA Maximum current: 63 A Great opportunity from a single owner: High-quality mandrel bending machine Dynobend DB-60 including a €70,000 tool package. For sale is a powerful and precise mandrel bending machine, type Dynobend DB-60, manufactured in 2009. The machine was purchased new directly from the manufacturer and has been in our possession ever since. It has been regularly maintained. It bends predefined designs fully automatically and reliably. The absolute highlight: Huge tool package included! The machine comes with an extremely comprehensive package of 18 different tool sets for round tubes ranging from Ø 17.2 mm to Ø 60.3 mm. The new price for these tools alone was approximately €70,000. This means you will be ready for an extremely wide range of tube processing applications immediately. Technical highlights & scope of performance: • Maximum tube length: up to 6,000 mm can be processed. • Intelligent control: The calculation of all required bending parameters is carried out according to the X-Y-Z coordinate system with convenient input via the touchscreen. • Bending radius: The largest possible neutral bending radius is at least 200 mm. • Condition & maintenance: Good, used condition. The machine has been regularly maintained directly by Dynobend; any necessary wear parts have been replaced promptly when needed. • Usage note: The fully automatic bending process depends on the minimum straight intermediate length between two bends as well as the overall design (with regard to potential collisions with the machine/floor in complex shapes). Important technical note: The laser scanner of the safety system has already been replaced, but it is currently not functioning correctly. The customer may need to take remedial action or make improvements. Complete documentation available: The machine will be delivered with all important and legally relevant documents: • EC declaration of conformity (Directive 98/37/EEC, Annex II A) • Original acceptance test report • Complete original operating manuals (pneumatics, hydraulics, electrical system, Sick laser scanner, program manager, and user manual) • All descriptions and maintenance invoices are available and can be disclosed. Inspection & demonstration welcome: Come and see for yourself! The bending machine is currently powered up and fully functional. After prior arrangement, we will be happy to demonstrate the machine in operation. Sales and delivery conditions: • Price: On request / negotiable. • Delivery condition: Ex works (EXW). • Logistics: The dismantling, the proper loading, and the removal must be organized by the buyer or carried out by a commissioned shipping company. Subject to prior sale. Take advantage of this opportunity for an immediately ready-to-use professional machine with enormous accessory value. We look forward to hearing from you and arranging an appointment for an inspection!

Condition: used, Year of construction: 2006, API tube mill 355mm x14mm (A3801) is line to produce pipes for petrol industries so can be perfect solution for your company to grow up API tube mill (Made in China), Forming machine is made in Japan OD 114–355mm wall thcikness: 4-14.3mm steel grade: N80 tube length:6-15m standard: API 5CT N80 scope of supply: – slitting line; – tube mill; – two end facing machines; – two hydro testers; – 1 tube straightening machine, rolls (OD 114.3, 139.7, 219.1, 273.05, 323.9, 339.72 , 355.6mm) Dodpov Hcwtefx Aarowd machine was made in 2006, stopped running in 2016. used seam annealer and HF welder, brand: Thermatool. Used slitter, Chinese brand. thickness: 4–14mm, N80, Q235, hot rolled steel. max coil width 1600–1700mm. 2+5 leveler DC motor: 55kw slitter DC motor: 160kw scope of supply: – coil car; – uncoiler (with 4 colums); – hold down roll; – peeler table; 2+5 leveler; – shear; – conveyor and loop; – guiding device; – slitter; – tension unit; – recoiler with support arm; – coil car; – approximate 12 slitting blades; – electric cabinet, hydraulic system. slitter is for tube mill

Condition: used, Year of construction: 2005, functionality: fully functional, AXOMATIC OPTIMA 700 Djdpfjzyu R Uox Aarowd Semi-Automatic Tube Filling & Closing Machine High-quality semi-automatic tube filling and closing machine from AXOMATIC, Italy, currently configured for aluminum tubes. Manufacturer: AXOMATIC S.r.l., Italy Model: OPTIMA 700 Serial No.: 14027E 2005 Year: 2005 CE marked MAIN EQUIPMENT - Currently configured for aluminum tubes - Rotary indexing table with 7 tube stations/holders - Manual tube loading - Volumetric piston dosing system - Stainless steel filling components - Two stainless steel product hoppers/vessels - One product hopper with water-heated jacket - One product hopper without heating - Automatic/continuous dosing modes - Automatic tube discharge - Stainless steel construction - Transparent safety guarding - Emergency stop and safety controls ACCESSORIES & SPARE PARTS Extensive package of machine-specific format, dosing, and spare parts included, such as: - Components for the volumetric dosing/filling system - Filling and format/change parts - Stainless steel and plastic machine components - Seals and O-rings - Bearing and mechanical spare parts - Additional replacement and wear parts The available accessories are shown in the photographs. The exact scope will be documented before delivery. TECHNICAL DATA Voltage: 400 V Frequency: 50 Hz Installed power: 8.5 kW Max. compressed air pressure: 6 bar Air consumption: approx. 150 l/min Max. water pressure: 3 bar Water consumption: approx. 2–3 l/min Noise level: < 75 dB Net weight: approx. 300 kg APPLICATION In its current configuration, the machine is equipped for filling and closing aluminum tubes. Conversion for plastic tubes is technically possible but requires a dedicated hot-air sealing system and corresponding components. This equipment is not included with the machine. Further information regarding a possible conversion is available upon request. SPARE PARTS & DOCUMENTATION We have received confirmation through the manufacturer's service network that spare parts for this machine are still available. Original machine-specific documentation is not available. However, technical documentation for a very similar, nearly identical AXOMATIC machine can be provided as a technical reference. CONDITION Used machine in very good condition. The machine has been set up and function-tested by CYCRON. The tested mechanical and electrical functions operated properly. A production test with actual product and aluminum tubes has not been carried out. Therefore, the filling process under production conditions has not been verified. Machine video available upon request. Inspection and demonstration possible by appointment. IMPORTANT Exact tube dimensions, dosing range, and production capacity depend on the installed format and dosing components. Further technical information, photographs, and available reference documentation can be provided upon request.

Condition: new, Year of construction: 2025, functionality: fully functional, AUTOMATIC PRODUCTION LINE FOR HEAT EXCHANGERS FOR HEAT PUMPS BRAND NEW – IN STOCK – READY FOR DELIVERY A brand-new, fully automatic production line designed for manufacturing heat exchangers for heat pumps is available for sale. The line covers the entire production process, from tube bending to reinforcement welding, incorporating advanced welding technologies. Main Features and Capabilities: Dwsdpfo Afqygjx Aarsd 1. Automatic tube bending and heat exchanger forming. 3. TIG welding system for precise, high-quality welds. 4. High-speed induction welding system for an efficient production process. 5. Automatic reinforcement welding. 6. Compatible with tube diameters ranging from Ø 26.9 mm to Ø 33.7 mm. 7. Adaptable to other tube diameters and flat tubes, according to customer requirements. 8. Integrated production process designed to ensure high repeatability, consistent quality, and manufacturing efficiency. Investment Benefits: This production line is an ideal solution for manufacturers of heat pumps, HVAC equipment, and industrial heat exchangers looking to increase production capacity, automate key manufacturing operations, and reduce manual labor requirements. Equipment Status: Brand-new production line, available immediately. For further information, technical documentation, configuration details, and pricing, please contact us.

Condition: like new (used), Year of construction: 2023, functionality: fully functional, 25-TAPE CORE WINDING MACHINE WITH MULTI-BLADE CUTTING SYSTEM Structural description: Dedo Ah Ex Njpfx Aarowd The 25-tape core winding machine for producing paper tubes consists of the following components: Unwinder – made of shaped tubes protected with anti-corrosion powder coating. The unwinder has the ability to move on adjustable swivel wheels controlled from the operator panel. Cascade adhesive applicator with pneumatic brakes, scrapers, and adhesive heater, distinguished by the ability to adjust tape guiding, braking, and adhesive film thickness. Adhesive supply is controlled by a membrane pump, and the entire system is controlled by a computer managing the operation. Forming section – consists of a steel body protected with powder coating, inside which the control system is located, a swivel arm with drums driven by 3 roller gearboxes with a total power of 3 x 15 kW. The drive arm has a reading of the swivel angle and longitudinal position, as well as a pneumatic belt tensioning system. The body has a replaceable "cold" mandrel for forming the cores with a standardized socket, and a guide tube with a counter-knife. Multi-blade cutting system – the cutting system body is a separate part of the core winding machine. Linear guides for the movement of the cutting unit are mounted on the body. Inside the body, the following drives are mounted: - servo drive for driving the circular knives of the cutting system - servo drive with planetary gearbox for moving the cutting unit - servo drive for retracting the counter-knife - servo drive for lowering the knife bar with 5 cutting modules. Coil width from 50 to 120 mm Coil diameter Dz = Ø 76 mm, Dz. Max. 1500 mm Coil loading: Electric winch Min. max. internal diameter of cores 38 mm / 250 mm Cutting performance for cores: Ø 50 mm, L= 100 mm, thickness 8 mm 160 pcs./min. / 9,600 pcs./h, 67,200 pcs. / 7h Lease transfer.

Condition: good (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 15-35-19-01, total length: 29,011 mm, total width: 1,995 mm, total height: 1,250 mm, input voltage: 400 V, Equipment: documentation/manual, The device is in working condition, but it is currently out of service and stored in a dry and warm area. It can be started upon prior arrangement. All technical documentation and the CE declaration are included. Dwedpfx Ao Af Ng Noarod A detailed description with specifications can be found in the attached .pdf documents. The maximum working height (height of the cooled material) is 6 cm.

Year of construction: 2014, condition: used, functionality: fully functional, machine/vehicle number: 14-35-15-10-02, The device is made of AISI 304 stainless steel. It has been lightly used and stored in a warm, dry area. The device is currently not in use, but it can be started after prior arrangement. Technical documentation, including a CE declaration, is available. - Total drum length: approximately 3100 mm. - Total drum height: approximately 2050 mm. - Inclination angle: 0 to -6º - Maximum drum diameter: 800 mm. - Motor rotational speed: 1.375 rpm - Gearbox ratio: 25.00 Dwsdpfx Aao Af Ihcjred - Service factor: 2.2 - Rated motor power: 0.750 kW - Motor supply voltage: 230/400 V Additional information can be found in the attached photos.

Condition: good (used), Year of construction: 2009, laser type: CO₂ laser, laser power: 3,200 W, X working area max.: 6500 mm Laser power: 3200 watts Control: SINUMERIK 840D Standard equipment: - Robust machine frame with integrated laser unit - CO2 laser TLF 2000, high-frequency excited, with cooling unit - Drives: Maintenance-free three-phase servo motors - Hl-LAS high-pressure cutting - Fast processing with SprintLas - Programmable cutting gas pressure adjustment - Laser cutting head with 5" lens, DIAS III - Quick-change device for cutting head - Laser power control - Laser logbook function - Automatic shut-off - Work area lighting - Control system SINUMERIK 840D: Open PC-based control, easy operation, diagnostic functions, maintenance logbook, technology data, teleservice, 3.5" floppy disk drive, RJ45 network connection - Safety: Multi-beam light barriers, fully enclosed and ventilated beam guidance, compact extractor, protective cabin Dwodpfx Ao Ahi Trjarsd - PRS 3001 unloading station with brush table - Chuck set D 20-85 mm Special equipment: + Upgraded to Laser TruFlow 3200 + SeamLine Tube + LoadMaster Tube 6.5 m, rear + Focus Line

Condition: used, Year of construction: 2009, AI Overview A 13-meter tube-in-tube heat exchanger paired with a mono (progressive cavity) pump is a heavy-duty industrial setup designed for continuous heating or cooling of high-viscosity, abrasive, or fiber- and particulate-laden fluids (such as wastewater sludge, digestate, food purees, pulps, or industrial effluents). [1, 2, 3] Core System Components & Description Tube-in-Tube (Double-Pipe) Heat Exchanger (13 Meters): Design: Consists of a concentric layout where a smaller inner tube (often corrugated to boost turbulence and heat transfer) is nested inside a larger outer shell tube. Flow Configuration: The process fluid flows counter-currently through the inner tube, while the service/heating/cooling medium flows through the annular space between the inner and outer tubes. Length & Scale: A 13-meter run (frequently modular or multi-pass/series-connected units mounted on a skid frame) provides an extended thermal exchange surface area suited for duty points requiring significant temperature delta (Δ T) without clogging. Handling Solids: Ideal for fluids containing suspended solids, large particles, or fibers up to tens of millimeters that would choke standard plate heat exchangers. [1, 2, 3, 4, 5, 6] Mono Pump (Progressive Cavity Pump): Function: Acts as a positive-displacement feed pump that delivers a steady, controlled, low-shear flow rate of the product medium into the heat exchanger. Why it fits: Progressive cavity ("mono") technology prevents pulsation and handles abrasive, thick, or high-viscosity slurries smoothly without damaging sensitive cell structures or choking under backpressure. [1] Key Applications Wastewater and sewage sludge heating or cooling. Viscous food-industry processing (sauces, pulps, creams, purees). Industrial effluent and dye-house waste heat recovery. Continuous thermal treatment requiring plug-flow characteristics and easy Clean-in-Place (CIP) maintenance Cooling: Yes Heating: Yes Temperatures: Depending on Connection Feed Pump: Mono Pump for Viscous Products CIP: This is cleaned through the CIP system Dwjdpjz Ruxlefx Aared Tube in Tube Legth: 13 meters including bends

Condition: used, Year of construction: 2019, Manufacturer: DJM Model: COEX 4 Year: 2019 Condition: Used Djdpfx As Ah Ttyjarowd Serial number: N500003 Stock number: 3365 Number of heads: 4 Capacity: max. 100 cycles/min. Product diameter: max. 60 mm Product temperature: -2 °C to +45 °C Belt width: 440 mm Belt length: 1920 mm Belt speed: 3 - 15 m/min. Power: 3 x 400V, 50Hz, 20kW Dimensions: 2030 x 1625 x 2281 mm Weight: 2500 kg For filled products.

Condition: new, functionality: fully functional, Year of construction: 2025, control type: CNC control, laser type: fiber laser, laser power: 3,000 W, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, Type: Two chucks Groove function: Standard Power range: 3KW, 6KW Round tube processing range: 10mm~160mm Square tube processing range: 10mm~160mm Chuck maximum speed: 130r/min Machine weight: 3T Dsdpswwz Dljfx Aarewd Power specification: 380VAC, 50Hz Optional loading rack: G16pro-automatic loading, G16pro-semi-automatic loading Optional unloading rack: servo unloading rack, cylinder unloading rack Standard: System 3000DE-DH, including nesting, supports servo, dustproof (Y axis), dustproof (X axis), dustproof (Z axis), rear card hollow dust removal, short tail material Optional: safety fence (light curtain), radiation-proof glass

Year of construction: 2015, condition: used, This listing is for 2015 Cedrex Fluid X xsd-48 Pro Automated Tube Decapper The unit is in full working condition and ready for immediate use This automated tube decapper is a robust system designed to provide accurate and consistent performance for high-throughput sample management and storage workflows. Manufactured by Cedrex, this reliable unit is an excellent addition to any modern facility processing sample tubes at scale. Transparency Report and Technical Audit: Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Dwodpozqf Hhefx Aarsd Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory. Source Pedigree: Biotech / Research Facility Condition: Direct-from-Bench (Decontaminated/Original) Integrity: 100% Original Parts (Non-Refurbished)

Condition: good (used), functionality: fully functional, Year of construction: 2007, laser type: CO₂ laser, laser power: 2,700 W, X working range max.: 6500 mm Y working range max.: 200 mm Laser power: 2700 watts Control system: SINUMERIK 840D Standard equipment: - Robust machine frame with integrated laser unit - CO2 laser TruFlow 2000, high-frequency powered, cooling unit - Drives: Maintenance-free three-phase AC servomotors - NitroLine high-pressure cutting - Fast processing with SprintLine - Cutting gas pressure setting programmable - Laser cutting head with 5’’ lens - Cutting head quick-change system - Laser power control - Laser logbook function Dwsdpfe Ahkc Tsx Aarjd - Automatic shutdown - Work area lighting - Control system Sinumerik 840D: Open control system based on PC, easy operation, online help, diagnostic function, maintenance logbook, technology data, remote service, 3.5’’ floppy disk drive, RJ45 network connection - Safety: Multi-beam light barriers, beam guidance completely enclosed and ventilated, compact dust collector, protective cabin - Unloading station PRS 3001 with brush table - Clamping jaw set D 20-85mm and D 85-150mm Optional equipment: + 2000 on Laser TruFlow 2700 + SeamLine Tube + LoadMaster Tube 6.5 m with bundle trough + Unloading station 6m with belt table + Focus line

Condition: new, Year of construction: 2026, The BENDMASTER 50 Mandrel-Free Tube Bender is an industrial machine designed for bending steel tubes and hollow sections without the need for an internal mandrel. Its integrated hydraulic clamping system, two operating modes – automatic and manual – and digital bending angle display ensure exceptional precision, repeatability, and ease of operation. The machine is ideal for mass production, prefabrication of piping systems, and workshops requiring precise control over the bending process. Main Advantages of the CORMAK BENDMASTER 50 Tube Bender Mandrel-free bending – bending tubes and hollow sections without cross-sectional deformation and without the need for an internal mandrel. Hydraulic clamping system – precise clamping force automatically adjusted according to the tube diameter. Two operating modes: automatic and manual – full control over the bending process, with the ability to program bending sequences or operate the machine manually. Dwodpfsvugw Hsx Aarod Digital bending angle readout – real-time display of the preset and actual bending angles on the operator panel. 2.2 kW main motor – ensures stable bending die rotation, even when processing large-diameter tubes. Bending dies for tube diameters of 25, 32, 38, and 48.3 mm – ready for operation with the most commonly used steel tube sizes. Bending angle up to 180° – enables the production of full bends and closed-shape components. Construction and Technology The BENDMASTER 50 is equipped with two independent motors: a 2.2 kW main motor driving the gearbox and bending die, and a 1.1 kW motor powering the hydraulic pump responsible for the clamping system. In programmed mode, clamping is performed automatically using an adjustable limit switch. This configuration allows optimal clamping parameters to be achieved for each tube diameter, improving bending quality and repeatability. The control panel features a clear digital display showing both the preset and actual bending angles. Precision and Operating Efficiency The BENDMASTER 50 tube and profile bender offers a full bending range of up to 180° while maintaining high accuracy. The bending die rotation speed of 5 rpm provides precise control over the shape of the workpiece while maintaining high productivity. Automatic mode enables repetitive bending in mass production with minimal operator involvement, while manual mode offers maximum flexibility and allows settings to be adapted to specific workpiece requirements. The machine is ideally suited for bending medium- and large-diameter steel tubes in serial production environments. Applications The BENDMASTER 50 mandrel-free tube bender is suitable for a wide range of industries and applications, including: Manufacturing piping systems for plumbing, heating, and industrial installations. Prefabrication of balustrades, handrails, and structural frames. Production of furniture components and decorative elements made from steel tubes. Standard Equipment Digital bending angle readout. Bending dies for the following tube diameters: 25 mm (bending radius: 90 mm) 32 mm (bending radius: 114 mm) 38 mm (bending radius: 134 mm) 48.3 mm (bending radius: 170 mm) Technical Specifications Maximum bending angle 180° Bending die rotation speed 5 rpm Main motor power 2.2 kW Hydraulic pump motor power 1.1 kW Overall dimensions 1145 × 580 × 980 mm Weight 620 kg

Condition: used, Year of construction: 2009, AI Overview A 13-meter tube-in-tube heat exchanger paired with a mono (progressive cavity) pump is a heavy-duty industrial setup designed for continuous heating or cooling of high-viscosity, abrasive, or fiber- and particulate-laden fluids (such as wastewater sludge, digestate, food purees, pulps, or industrial effluents). [1, 2, 3] Core System Components & Description Tube-in-Tube (Double-Pipe) Heat Exchanger (13 Meters): Design: Consists of a concentric layout where a smaller inner tube (often corrugated to boost turbulence and heat transfer) is nested inside a larger outer shell tube. Flow Configuration: The process fluid flows counter-currently through the inner tube, while the service/heating/cooling medium flows through the annular space between the inner and outer tubes. Length & Scale: A 13-meter run (frequently modular or multi-pass/series-connected units mounted on a skid frame) provides an extended thermal exchange surface area suited for duty points requiring significant temperature delta (Δ T) without clogging. Handling Solids: Ideal for fluids containing suspended solids, large particles, or fibers up to tens of millimeters that would choke standard plate heat exchangers. [1, 2, 3, 4, 5, 6] Mono Pump (Progressive Cavity Pump): Function: Acts as a positive-displacement feed pump that delivers a steady, controlled, low-shear flow rate of the product medium into the heat exchanger. Why it fits: Progressive cavity ("mono") technology prevents pulsation and handles abrasive, thick, or high-viscosity slurries smoothly without damaging sensitive cell structures or choking under backpressure. [1] Key Applications Wastewater and sewage sludge heating or cooling. Viscous food-industry processing (sauces, pulps, creams, purees). Industrial effluent and dye-house waste heat recovery. Continuous thermal treatment requiring plug-flow characteristics and easy Clean-in-Place (CIP) maintenance Dwodpfx Aez Ru Erearod Usage: Cooling or Heating of Viscous Products Previously Used on: Yoghurt and Juice Pastes Pump: Mono Pump Meters of Tube in Tube: 13 Condition: Very Good Available: Immediately

Year of construction: 1996, condition: excellent (used), TUBE BLASTING MACHINE.Machine is used to clean the inner surface of the copper tube in a continuous process of blasting. Dwjdspmtb Rspfx Aarsd

Condition: used, Year of construction: 2016, Used machine Year of manufacture: 2016 Equipment and technical data: - Electrics 3x400V 50 / 60Hz - Gimbal-mounted 5-axis electrospindle 12 kW (S6) HSK F63 - 24,000 rpm - ceramic bearings incl. liquid cooling with infinitely height-adjustable extraction hood - electric-motor controlled - full rated power at approx. 12,000 rpm - speed: 1000 - 24000 rpm - drive: 3-phase HF motor, inverter-controlled - direction of rotation: clockwise/counter-clockwise - 2 controlled compressed-air connections - interface for aggregates - tool weight (rotating): 6 kg - max. saw blade Ø 350 - spindle cooling: liquid cooling - extraction hood infinitely variable - Profit H350 16.30: CNC machining centre in gantry design (without tool) with digital drives (driven on both sides). The machine column of the Profit H350 16.30 is made of thick-walled, electrically welded rectangular tubes. The steel ribbing inside the column achieves high stability. - Machining field H350 16.30: Travel of the axes: X = 4000 mm Y = 1970 mm Z = 455 mm Working field: X = 3000 mm Y = 1500 mm Z = 150 mm clearance height Axis positioning speeds: depend on the selected safety system (these can be found in the layout). - Travelling gantry driven on both sides - Guide system X axis: The travelling gantry of the X axis is driven via a rack with inclined, crowned tooth form - This guarantees highest precision. The reduction gear ensures highest machining quality and repeat accuracy. The bearing is provided by means of encapsulated recirculating-ball shoes running on hardened and ground linear guides. - Guide system Y axis: The bearing is provided by means of encapsulated recirculating-ball shoes running on hardened and ground linear guides. The Y axis is positioned by means of a ground recirculating ball screw. - Guide system Z axis: Dwsdpfxjzlbpbs Aared The bearing is provided by means of encapsulated recirculating-ball shoes running on hardened and ground linear guides. The Z axis is positioned by means of a ground recirculating ball screw. - Automatic central lubrication: The grease is delivered in a controlled manner to the guide carriages of the X, Y and Z axes as well as to the recirculating ball screws in Y and Z. The lubrication process is carried out automatically after a specified time. - 12-position linear tool changer on the left of the machine column incl. a pick-up position for aggregates: The 12-position linear changer ensures shortest changeover times and offers sufficient space for milling tools. One aggregate change position (fitting variants see layout) Max. tool diameter 250 mm Max. tool length 240 mm - Drilling head DH 18 6H 1S: Vertical 12 spindles: 7 spindles in the X direction and 5 spindles in the Y direction. Horizontal 6 spindles: 4 spindles in the X direction and 2 spindles in the Y direction. Forward stroke = 70 mm max. drill length = 70 mm and shank D = 10 mm. All spindles are individually driven and selectable. 1 grooving saw – in the X direction max. saw blade diameter 120 mm max. blade thickness 5 mm max. speed infinitely variable up to 7500 rpm. The drilling group covers the entire working field both horizontally and vertically. - Controlled central extraction connection: Via the program control, either the drilling head or the milling spindle is extracted. This controlled slide gate achieves an optimised extraction performance. Connection diameter see layout - 6 workpiece supports: With front and rear...

Condition: used, Year of construction: 2018, functionality: fully functional, Plasma cutting machine for pipes and profiles Plasma cutting machine for cutting pipes and profiles. The cutting contour is defined and create by the software. The created CNC code can send to the machine via USB or network. The program can be easily choose via the 12"touch display. The automatic cutting process is started after manual insertion of the workpiece. - Tube length: max. 6000mm - for round tube up to OD = 150mm max - for square tube up to 101.6x101.6mm (4 "x4") max - maximum pipe weight 150KG per load - 4-jaw chuck - 1x automatic raw support - fully automatic cutting process - PC control with 12 "touch display - Data import via USB and network - Power consumption: 400V 3P 2KW - weight: 800KG Dwedpfx Ajx Ebzqjarjd Made in Germany The pictures show you an older bigger machine

Condition: good (used), Year of construction: 2011, Vibratory feeder for sale, price is for one unit Djdowydkgopfx Aarewd

Condition: excellent (used), Ref: MM6323 ROKK Processing Ltd continuous freezer supplied with control unit. Manufacturer: ROKK Processing Ltd. Model - RFE 300. Date of manufacture - 2024. Dwjdpjydlg Aofx Aared Freon gas - R404A. Ideal for use in small laboratories up to large factories. Limited use over the 16 months since installation. Control unit: 1 x ROKK Processing Ltd Control Unit. Manufacturer: ROKK Processing Ltd Model: SP40BC Capacity - 100 to 300 liters per hour Calibrated to BRC standard 3 Phase power Fixed and flexi hose dispensing options Pipes for connection to pasteuriser included Various spare parts included Overall dimensions - 1100mm long x 730mm wide x 1620mm high. Weight - 550 kg. The spray arm at the top of the machine (blue) can be detached for shipping.

Condition: new, Year of construction: 2024, All-round fiber laser metal tube cutting machine Multiple function options help the laser tube cutting machine be used in numerous tube cutting processes. The slender nozzle allows the laser tuber cutter to avoid interference and cut various types of tubes, including special-shaped tubes like H-Beam, P-Beam, I-beam, etc. Cutting machine clamping becomes convenient, easy and fast, with 3 seconds at the soonest to clamp and high repeat precision Cutting performance and efficiency are improved by maintaining gas flow steady with little turbulence. Dedpfjhwrlxjx Aarjwd BodorGenius, combined with the lightning-quick piercing process, completes the whole piercing during it moves down on Z-axis. Thanks to the technology, no reworking is necessary for medium and thick sheet piercing. Angle steel and channel steel cutting are standard with no need for additional installation. Optimized edge searching method and algorithm guarantee higher cutting precision and better steadiness of the laser cutter. Condition: New Laser Type: Fiber Laser Laser Power: 1500W, 2000W, 3000W, 6000W Maximum machinable tube length: 6500mm/9200mm Chuck drive types: NC electric chuck Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT CNC or Not: Yes Cooling Mode: WATER COOLING

Year of construction: 2019, condition: good (used), Aluminum cylinders with diameters of 140 mm and 90 mm, wall thickness 5 mm; a clamping ring secures the 50 mm shaft stub, which is turned down to 45 mm; shell length: minimum 2720 mm, maximum 2800 mm. 27 pieces of 90 mm diameter cylinders, 6 pieces of 140 mm diameter cylinders. Price applies to the total quantity. Dsdpfey Nc H Eex Aarewd

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: T-24-0076-00, tank capacity: 17,000 l, total length: 5,160 mm, total width: 2,500 mm, total height: 3,488 mm, inner diameter: 2,200 mm, outer diameter: 2,426 mm, overall weight: 5,300 kg, wall material: stainless steel, wall thickness: 10 mm, wall structure: single-walled, number of chambers: 1, manhole diameter: 600 mm, manhole location: top, operating temperature: 150 °C, negative pressure: -1 Pa, overpressure (max.): 4 bar, Equipment: CE marking, Stainless steel pressure vessel (V4A), insulated, horizontal (pharmaceutical vessel for ultra-pure water - Aqua Purificata) Technical data / Dimensions Available quantity: 2 Volume: approx. 17,600 liters Vessel type: Pressure vessel Condition: brand new Food-grade: yes Design: horizontal, above-ground Internal diameter: approx. 2,200 mm External diameter: approx. 2,426 mm Cylindrical length: approx. 4,600 mm Overall length: approx. 5,160 mm Overall height: approx. 3,488 mm Weight: approx. 5,300 kg Operating pressure: Overpressure/Underpressure Operating overpressure: 4.00 bar Test pressure: 7.20 bar Underpressure: -1.00 bar Wall thickness, bottom: approx. 10 mm Wall thickness, shell / cylinder: approx. 10 mm Bottom clearance: approx. 990 mm Operating temperature: 0-150°C Nameplate available Material / Properties Material, inner shell: Stainless steel Material grade: V4A-1.4404 (AISI 316L) Material, feet: Stainless steel Notes: Bottoms: internally machine-ground Ra < 0.6 µm, electropolished Shell: welds internally ground Ra < 0.6 µm, electropolished Shell internally machine-ground Ra < 0.6 µm, electropolished Insulation Insulation: present Insulation thickness: approx. 100 mm Insulation material: Mineral wool Material, insulation shell: Stainless steel Insulation shell: diffusion-tight, welded Notes: Insulation shell made of material 1.4301 (3 mm) Equipment Stand design: Feet Number: 2 Mounting: fixed Width: approx. 300 mm Dedpfx Aaj Ahfnxjrowd Length: approx. 2,100 mm Foot height: approx. 957 mm Foot center distance: approx. 3,559 mm Slope: approx. 2 % Bottom type: Dish bottom Front bottom: 3 x Lifting lugs Rear bottom: 3 x Lifting lugs Shell: 1 x Grounding lug (EN 10028-7) 1 x Manufacturer's plate (EN 10028-7) 3 x Insulation membrane 1/2" (DIN 910) 1 x Manhole DN 600, acc. to manufacturer RST. 1 x Sight glass DN 100, HZ-CONNECT (ASTM A270) 1 x Light glass DN 50, aseptic flange NA-Connect (DIN 32676-B) 1 x Nozzle for safety valve DN 25, aseptic flange NA-Connect (DIN 32676-B) 1 x Nozzle for pressure gauge DN 25, aseptic flange NA-Connect (DIN 32676-B) 1 x Nozzle for pressure transmitter DN 25, aseptic flange NA-Connect (DIN 32676-B) 1 x Nozzle for overfill protection DN 25, aseptic flange NA-Connect (DIN 32676-B) 1 x Nozzle for level measurement DN 25, aseptic flange NA-Connect (DIN 32676-B) 1 x Nozzle for gas filter DN 40, aseptic flange NA-Connect (DIN 32676-B) 1 x Inlet 1 (Nozzle DN 65), aseptic flange NA-Connect (DIN 32676-B) 1 x Inlet 1 (Lance DN 32), aseptic socket weld stub (DIN 11864-3) 1 x Inlet 2 (Nozzle DN 50), aseptic flange NA-Connect (DIN 32676-B) 1 x Inlet 2 (Lance DN 25), aseptic socket weld stub (DIN 11864-3) 1 x Spray ball 1 (Nozzle DN 65), aseptic flange NA-Connect (DIN 32676-B) 1 x Spray ball 1 (Lance DN 25), aseptic socket weld stub (DIN 11864-3) 1 x Spray ball 2 (Nozzle DN 65), aseptic flange NA-Connect (DIN 32676-B) 1 x Spray ball 2 (Lance DN 25), aseptic socket weld stub (DIN 11864-3) 1 x Spray ball 3 (Nozzle DN 65), aseptic flange NA-Connect (DIN 32676-B) 1 x Spray ball 3 (Lance DN 25), aseptic socket weld stub (DIN 11864-3) 1 x Reserve nozzle DN 40, aseptic flange NA-Connect (DIN 32676-B) 1 x Connection for temperature probe 3/8 inch, weld-in socket (ZETA) 1 x Bottom outlet 1 DN 100, weld-on end (DIN 11866-B) 1 x Bottom outlet 2 DN 40, according to P6008 02-01F 41 1508 Z062 (DIN 11866-B) 1 x Bottom outlet 3 DN 100, weld-on end (DIN 11866-B) Design and manufacture according to EU Pressure Equipment Directive, AD-2000 code