Used Tube Processing for sale (21,588)

Year of construction: 2008, operating hours: 1 h, condition: used, functionality: fully functional, machine/vehicle number: STCOS M5, Burr Oak Single Tube Cut-Off System Model: STCOS M5 Year:2007 Specifications Machine Code: LHM, SWS, 36HF, SCO, SPA, 12ROHG, ECTG Cut-Off - Tcd Standard Ltedpfx Agev Nak Aszsa Hitch Feed - Tcd Standard Straightener – Tcd Standard W/ Sizing Pull-Apart – Tcd Standard Coil Stand – Tcd 3 Position Over Head Uncoiler Runout Table - Tcd 12’ Runout Table W/ Hinge Gate Supply: 480 Volts, 3 Phase, 60 Hertz Control: 110/24 Volts Extra Options The Hinge Gate Run Out Table Needs To Be Able To Switch From One Side To The Other Tooling – Tcd .500” O.D. Complete Set With 14 Straightening Rolls, 4 Sizing Rolls 6 Pair Clamp Jaws (Total), 1 Exit Guide Tube, (3) Tube Entry Bullets And Connectors .375” O.D. Complete Set With 14 Straightening Rolls, 4 Sizing Rolls 6 Pair Clamp Jaws (Total), 1 Exit Guide Tube, (3) Tube Entry Bullets And Connectors

Condition: new, Year of construction: 2024, All-round fiber laser metal tube cutting machine Multiple function options help the laser tube cutting machine be used in numerous tube cutting processes. The slender nozzle allows the laser tuber cutter to avoid interference and cut various types of tubes, including special-shaped tubes like H-Beam, P-Beam, I-beam, etc. Cutting machine clamping becomes convenient, easy and fast, with 3 seconds at the soonest to clamp and high repeat precision Ledpfjhwrlxsx Agzjta Cutting performance and efficiency are improved by maintaining gas flow steady with little turbulence. BodorGenius, combined with the lightning-quick piercing process, completes the whole piercing during it moves down on Z-axis. Thanks to the technology, no reworking is necessary for medium and thick sheet piercing. Angle steel and channel steel cutting are standard with no need for additional installation. Optimized edge searching method and algorithm guarantee higher cutting precision and better steadiness of the laser cutter. Condition: New Laser Type: Fiber Laser Laser Power: 1500W, 2000W, 3000W, 6000W Maximum machinable tube length: 6500mm/9200mm Chuck drive types: NC electric chuck Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT CNC or Not: Yes Cooling Mode: WATER COOLING

Year of construction: 2010, condition: ready for operation (used), Control Unit Brand SIEMENS Main Drive Number of axis 5 Max Material Thickness Steel 25 mm Stainless steel 20 mm Additional Equipment Automatic (un)loading with 8 loading locations This 5-axis TTM FL 600 3D tube cutting machine was manufactured in 2010. It features a Trumpf Truflow 5000 resonator with 5kW power and a 3D cutting head capable of 45-degree cuts. It handles tubes up to Ø610mm, with a maximum wall thickness of 25mm for steel. The machine includes an automatic loading system with 8 locations. If you are looking to get high-quality cutting capabilities, consider the TTM FL 600 3D machine we have for sale. Contact us for more information. Application Types Lodpex Nkmtsfx Agzsta Cutting

Condition: new, Your contact person in our home: Mr: André evening Mr: Marcel Brahms Mr: Simon blank We offer a new square tube for sale here. Included in the scope of delivery: Lsdpfxjdzq Scj Agzota 01 x square tube, new Material color: hot-dip galvanized Overall length: 6.050 mm Profilabm.: 50 x 50 mm Material thickness: 2 mm Steel grade: S235JRH/275JRH Customs tariff number: 73066192 Production according to: EN 10219-1 Our services at a glance: (Prices on request) Installation, construction our general conditions of erection are to be observed Shelf testing Shelf inspection according to DIN EN 15635 carried out according to the Requirements of BGR 234 Visual inspection for all shelf systems Delivery with our own fleet of vehicles (without discharge)

Condition: ready for operation (used), total length: 5,500 mm, total width: 1,400 mm, total height: 1,000 mm, empty load weight: 600 kg, Buisbuigmachine voor buis: dia 6 48 mm voor volledig materiaal: max 30 mm met gereedschap voor buisdiameter 21,3 / 26,9 / 33,7 / 42,4 / 48,3 mm Max dia tube x thickness: Ø 6 > 48 mm (45 kg / mm²) Ltodpfjxcqi Ejx Agzsa Max bendingradius: 180°

Condition: good (used), functionality: fully functional, Year of construction: 1995, Tube bending machine by MARK / Ridgid Ltodpfx Ajx Ivpwogzsa Type: 2H B Without tools

Condition: good (used), Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -Power: 3.7 kW at 2880 rpm at 50 Hz -Power: 5.2 kW 5870 rpm at 100 Hz -Voltage: 220/380 volts -Receiving shaft: Ø 40 mm -Tool: electrically movable -Tool: Ø 180 x 28-48 mm Ljdpfx Ageb A Hl Nszeta -Dimensions: 830/400/H200 mm -Weight: 70 kg

Condition: as good as new (ex-display), Remark: This is a II. Wahl product, new product unused. II. Wahl means there may be dust deposits, minimal scratches or dirt or dirt may be present. Ltjdpfopbvgdsx Agzoa Technical data for the plug-in tube: Manufacturer: SSI Schaefer Shelf system: R3000 suitable for KTZR 31036 shelf cross beams Included in delivery: 01x plug-in tube, II. choice (new goods) Material color: galvanized Type: KRA 4300 Total length: approx. 390 mm Useful height: approx. 295 mm TubeØ: approx. 12 mm Weight / pcs.: approx. 0,070 kg Your contact person in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is offered for pickup only. A desired transport or shipment of this or a shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery can be requested from us.

Condition: ready for operation (used), machine for expanding and reducing tubes Ltodpfjwrt Tzex Agzea 3 heads no tooling included (can be supplied on demand) Dimensions: 1500 x 2000 x 2000 mm Weight: 1600 kg

Condition: good (used), Double-end tenoner, edge processing machine, scoring motor, chipper motor, milling motor, spindle motor -Power output at 50 Hz: 4.4 kW, 2890 rpm -Power output at 100 Hz: 6.6 kW, 5860 rpm -Hole: Ø 35 mm -Tool: Ø 250 mm Lsdpsb A Idiofx Agzeta -Number: 3x motors available Price: per piece (other types of engines also available) -Dimensions: 560/240/H160 mm -Weight: 50 kg

Condition: good (used), The scope of delivery includes: 01x rectangular tube, used profile dim.: approx. 50 x 30 mm Material color: orange total length: approx. 3.660 mm center-center-hole: approx. 3.630 mm material thickness: approx. 1,50 mm Number of drill holes: 2 pcs. Drill hole Ø: approx. 10 mm Weight / pc.: 6,150 Kg Your contact person in our company: Mr.: Andre Evering Mr.: Mario Klöver Lodsndiqdspfx Agzeta Mr.: Falk Deutsch General information about the item: This item is offered for pickup only. A beyond that desired transport or a shipment of this article is associated with additional additional costs, which are separately depending on the place of delivery or scope of delivery can be requested from us.

Condition: ready for operation (used), Type: 1304 -The ZINSER cutting machine 1306 has been particularly developed for efficient machining of pipes for cylindrical pipes. Apertures, notches and the entire end preparation can be realized quickly and economically. A variety of standard figures is available from the ZINSER MCC software. Lsdjx Imn Dspfx Agzeta - Pipe cutting machine with track (X) and rotation axis (A) - Three-jaw chuck or four-jaw chuck - A hollow shaft through the chuck enables the use of an internal ventilation - CNC-controller - Thermal dynamics plasma power source with dialogue system - Torrit filter system - max cutting cap: 25 mm - X-movement: 5100 mm - Z-movement: 150 + 270 mm Plasmasource: Thermal Dynamics A60

Condition: good (used), Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -Motor: 1.5 kW 2840 rpm at 50 Hz Lodpfxeb A Nl Us Agzjta -Shaft mounting: Ø 15 mm -Weight: 12 kg

Condition: as good as new (ex-display), Remark: This is a II. Wahl product, new product unused. II. Wahl means there may be dust deposits, minimal scratches or dirt or dirt may be present. Technical data for the plug-in tube: Ltsdpfxopbvgtj Agzoa Manufacturer: SSI Schaefer Shelf system: R3000 suitable for KTZR 31036 shelf cross beams Included in delivery: 01x plug-in tube, II. choice (new goods) Material color: galvanized Type: KRA 4170 Total length: approx. 170 mm Useful height: approx. 95 mm TubeØ: approx. 12 mm Weight / pc.: approx. 0,030 kg Your contact person in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is offered for pickup only. A desired transport or shipment of this or a shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery can be requested from us.

Condition: ready for operation (used), machine for expanding and reducing tubes 1 head no tooling included (can be supplied on demand) Stroke: 150 mm Power: 11 kW Ljdewrt Tujpfx Agzsta Dimensions: 2200 x 800 x 1200 mm Weight: 500 kg

Condition: good (used), Double-end tenoner, edge processing machine, flush trim router bit, edge router bit, spindle motor, milling motor Ltedeb A Im Repfx Agzsa -2x motor: 0.4 kW 20 shaft 11300 rpm at 200 Hz -Motor: mounted on guides -Motors: swiveling -Cutter: with indexable inserts -3x consoles: each with 2 motors Price: per piece -Weight: 60 kg/piece

Condition: as good as new (ex-display), Remark: This is a II. Wahl product, new product unused. II. Wahl means there may be dust deposits, minimal scratches or dirt or dirt may be present. Technical data for the pipe bracket: Manufacturer: SSI Schaefer Shelf system: R3000 suitable for KTZR 31036 shelf beams Frame depth: 800 mm Included in delivery 01x tube stirrup, II. choice (new goods) Partly with stirrup pad Type: KTB 80 Material color: galvanized Total height: approx. 420 mm Total depth: approx. 754 mm TubeØ: approx. 12 mm Weight / pcs.: approx. 0,250 kg Your contact person in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch Ltodpjpbvw Hofx Agzea General information about the item: This item is offered for pickup only. A desired transport or shipment of this or a shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery can be requested from us.

Condition: ready for operation (used), machine for expanding and reducing tubes Ltedjwrt Tnopfx Agzsa 2 heads

Condition: good (used), Double-end tenoner, edge processing machine, scoring motor, chipper motor, milling motor, spindle motor -Power: 0.4 kW at 12000 rpm at 200 Hz -Power: 0.60 kW at 16500 rpm at 300 Hz -with indexable insert milling cutter -Number: 4x motors available Price: per piece Ltsdpfx Agsb A Igpozoa -Weight: 6 kg/piece

Condition: good (used), Double-end tenoner, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -1x motor: 1.5 kW 2740 rpm at 50 Hz -Shaft mounting: Ø 20 mm/M16 mm Ltedpfx Asb A Ix Tegzoa -Motor: mounted on guides -Travel distance: 160 mm -Weight: 30 kg

Condition: good (used), Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -1x motor: 1.5 kW 2770 rpm at 50 Hz -Hole: Ø 30 mm -Motor mounted on guides Ltjdpfx Agjb A Nmdszsa -Number: 2x motors available -1x: right-hand thread -1x: left-hand thread Price: per piece -Weight: 20 kg/piece

Condition: good (used), Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -Motor: 2.2 kW 2820 rpm at 50 Hz -Motor: 4.2 kW 5810 rpm at 100 Hz -Shaft mounting: Ø 30 mm -Overall dimensions: 340/130/H220 mm -Weight: 18 kg Ltodpfx Agsb A Nl Iszja

Condition: good (used), Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -1x motor: 0.3 kW 12000 rpm at 200 Hz -Indexable insert milling cutter -Motor: mounted on guides -Number: 3x motors available Price: per piece -Weight: 5 kg/piece Lsdpfxsb A Nlxs Agzjta

Condition: good (used), Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor Ltjdpfx Aob A Nm Sogzja -1x motor: 0.7 kW 11400 rpm at 200 Hz -Voltage: 220 V -Hole: Ø 20 mm -Weight: 5 kg

Condition: good (used), Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor Ltjdpob A Nmpofx Agzea -Power: 1.5 kW at 18000 rpm at 300 Hz -Shaft mounting: Ø 20 mm -Number: 1x motor available -Weight: 10 kg