Used Alzmetall for sale (159)

Condition: used, functionality: fully functional, The ALZMETALL AX 2/S is the more compact sister machine to the ALZSTAR series. It is a professional, extremely precise bench or pillar drill (depending on the base), primarily used in precision engineering, training workshops, laboratories, and demanding workshops. While the ALZSTAR 30/S is designed for "rough" work with a drilling diameter of up to 30 mm, the AX 2/S focuses on compactness and maneuverability for smaller drilling diameters, without compromising the typical Alzmetall stability. Technical data at a glance Feature | Value / Specification ----- | ----- Drilling capacity (in steel St 60) | 23 mm Thread cutting (optional) | max. M 14 (steel) / M 16 (cast iron) Spindle mount | MK 2 (short spindle) Spindle stroke (Z-axis) | 100 mm Overhang | 250 mm Column diameter | 90 mm Machine table (support) | 370 x 300 mm Feed | Manual Motor power | 0.6 / 0.95 kW Spindle speed (stepless) | Variant 1: 125 – 2,400 rpm | Variant 2: 225 – 4,300 rpm Machine weight | approx. 180 kg (net machine weight) Key features & equipment details Mechanically stepless drive: As with the larger sister model, the speed is adjusted steplessly and conveniently during operation via a mechanical control wheel (variator). Digital display: The spindle speed is displayed digitally on a clearly visible display on the head of the machine as standard. Compact size: With a net weight of approximately 180 kg, it is significantly lighter than the ALZSTAR 30/S (approx. 260 kg) and can still be transported or moved relatively easily if required. Safety features: A lockable main switch with motor protection, a locking emergency stop button, and the electrically protected spindle guard are also standard features. Bjdpfezdy Rzsx Anpoww Note: Sold without warranty or guarantee. We assume no liability for the operational functionality of the machine. The sale is made excluding any liability for material defects, to the extent permitted by law.

Condition: good (used), Year of construction: 2016, operating hours: 52,000 h, functionality: fully functional, Travel ranges: • X-axis: 660 mm • Y-axis: 800 mm • Z-axis: 550 mm • Interference circle diameter: 800 mm • Table & load (NC swivel rotary table): • Max. table load (including fixture): 500 kg • Drive for A and C axes: 3x torque direct drives • C-axis speed (rotational function): Up to max. 800 min−1 • Main spindle & tool: • Tool holder: HSK-T63 (specifically optimized for turning and milling tools) • Max. stepless speed: 10,000 min−1 • NC swivel rotary table (A and C axes) • Swivel range (A-axis): +120° to -120° • Rotational axis (C-axis): 360° continuous with rotational function up to 800 min−1 • Table diameter: approx. 600 mm Bwsdpfxj Ahx Uvo Anpsw • Tool magazine • Standard capacity: 63 tool positions

Condition: good (used), Year of construction: 1979, functionality: fully functional, spindle mount: MK 3, For sale is a pillar drilling machine from the brand Alzmetall in good, used condition, as can be seen in the pictures. Technical data: • Manufacturer: Alzmetall • Model: AB3-ES • Speed: approx. 65 - 1,750 rpm • Quill stroke: approx. 180 mm • Table size: approx. 515 x 415 mm Bwedpfx Anj Ahrhiepsw • Year of manufacture: 1979 • With coolant pump • Condition: Used, functional The machine can be inspected and tested at any time! Shipping costs via freight forwarder: approx. €190 International buyers are welcome! You will receive an invoice with VAT shown. Inspection/collection is possible by arrangement in 42855 Remscheid. Sale from location 42855 Remscheid, free on board. Errors in technical data and prior sale reserved.

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS GENERAL DATA Manufacturer: Alzmetall Type: AC 32 Year of manufacture: 2011 Machine number: PRJ044839 Machine type: Bench drill Bwsdpfxs Adzy Us Anpjw ELECTRICAL DATA Operating voltage: 3 × 400 V Frequency: 50 Hz Rated current: 20 A SPINDLE Speed range: 55–5,000 min⁻¹ WORK TABLE Table dimensions: 510 × 420 mm Table slots: 5 MACHINE DETAILS DIMENSIONS AND WEIGHT Length: 1,000 mm Width: 800 mm Height: 2,200 mm Weight: 500 kg EQUIPMENT Digital display

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, operating hours: 50 h, power: 1 kW (1.36 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, spindle mount: MK 3, height adjustment type: mechanical, actuation type: electric, rotational speed (min.): 225 rpm, total height: 1,790 mm, throat depth: 293 mm, table width: 360 mm, table length: 514 mm, overall weight: 260 kg, Equipment: CE marking, rotational speed infinitely variable, The pillar drill was hardly used and served only as a backup in case of production downtime. Bwedpfs Afxahjx Anpsw Its condition is very good. The original purchase price was €5,270.00 on October 13, 2022.

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 600 mm, controller model: Heidenhain TNC 426, spindle speed (max.): 12,000 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS X-axis travel: 600 mm Y-axis travel: 400 mm Z-axis travel: 600 mm Table length: 750 mm Table width: 450 mm Bwjdpfxj Afxpzo Anpsw Spindle speed: max. 10,000 rpm Tool positions: 24 MACHINE DETAILS Control system: Heidenhain TNC 426 EQUIPMENT 24-position tool changer

Condition: good (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 500 mm, workpiece weight (max.): 1,800 kg, table width: 800 mm, table length: 920 mm, overall weight: 14,500 kg, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 33, Control system: HEIDENHAIN iTNC 530 with smarT.NC Tool interface: HSK-A63 Machining: 3-axis simultaneous Special equipment: Bodpfj Aba Thex Anpjww - 3D touch probe system - Tool measurement - Electronic handwheel - Roller-type roof guard FREE DELIVERY!

Condition: used, Year of construction: 1995, bore capacity in steel (diameter) 35 mm throat 300 mm bore stroke 180 mm turning speeds 45-1750 U/min 615 x 420 mm total power requirement 2,2 kW weight of the machine ca. 0,5 t dimensions of the machine ca. 1,2 x 0,8 x 2,15 m Equipment: - Robust pillar drilling machine Bwjdpfxj Ahziae Anpew - Infinitely variable speed adjustment (V-belt) - Thread-cutting device - Automatic spindle feed * With electromagnetic engagement - Multi-speed (pole-changing) motor - Clockwise/counter-clockwise spindle rotation - Drilling depth stop - Machine table with 2 T-slots * Height-adjustable via hand crank - Coolant system - Machine vise - Emergency stop

Condition: used, Year of construction: 1991, bore capacity in steel (diameter) 35 mm throat 300 mm Bwedpfxe Ahzido Anpsw bore stroke 180 mm turning speeds 45-1750 U/min 615 x 470 mm total power requirement 2,2 kW weight of the machine ca. 0,5 t dimensions of the machine ca. 1,2 x 0,8 x2,15 m Equipment: - Robust pillar drilling machine - Infinitely variable speed adjustment (V-belt) - Thread-cutting device - Automatic spindle feed - With electromagnetic engagement - Multi-speed (pole-changing) motor - Clockwise/counter-clockwise spindle rotation - Drilling depth stop - Machine table with 2 T-slots - Height-adjustable via hand crank - Coolant system - Machine vise - Emergency stop

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, input voltage: 400 V, total length: 14,000 mm, Equipment: documentation/manual, Alzmetall AB 26 drilling line with MKH CNC positioning and roller conveyors (2006) For sale: complete drilling line for profiles and strips, built around an Alzmetall AB 26 column drilling machine with an MKH CNC positioning system. The machine has been used in our production and is being sold due to workshop restructuring. Specifications: • Column drilling machine: Alzmetall AB 26, manufactured in 2006 • Digital display of spindle speed and drilling depth • Automatic spindle feed with depth adjustment Bjdpfsz I Tahex Anpjww • Coolant lubrication system • MKH CNC control with positioning carriage and gripper on guide rail • Pneumatic work piece clamping • Infeed and outfeed roller conveyors, total length approx. 14 m • Separate control cabinet with emergency stop and main switch • Connection values: 400V / compressed air 6-10 bar Condition: operational, can be demonstrated while running. Manual available. Location: Waalwijk, Netherlands Availability: immediate / by arrangement Dismantling and loading: [by arrangement / buyer arranges transport / we assist with loading] Price: € 9,000 excl. VAT Inspection by appointment is possible.

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS Bjdpfxo Adzv Aj Anpsww DRILLING TABLE Table dimensions: 500 × 410 mm Number of slots: 5 MACHINE DETAILS Manufacturer: Alzmetall Type: AC 32 AS Year of manufacture: 1997 Machine type: Bench drilling machine Length: 900 mm Width: 700 mm Height: 2,000 mm Weight: 400 kg EQUIPMENT Digital display

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, Well, selling due to no usage. Bsdoz Ellwspfx Anpsww

Condition: good (used), Year of construction: 2008, bore capacity in steel (diameter) 40.0 / 50.0 mm throat 320 mm bore stroke 160 mm turning speeds 70 - 4000 U/min table: 770 x 760 mm T-slots 3x 14 x 112 mm table height 780 mm distance spindle /table 988 / 304 mm bore spindles - Morse Taper 4 Kurzspindel MK feed 0.1-0.2-0.3-0.4 mm/U column diameter 145 mm engine output 1.5 / 2.4 kW weight 315 kg Current new price approx. 20.000 euros Special price upon request Features: - Robust pillar drilling machine Bwedps Agw Sujfx Anpsw * ??Drive: V-belt – VARIO system * Height-adjustable drill head * Constant table height - Automatic spindle feed * With electromagnetic feed clutch * And electrical control via the feed handle * 4 feed rates: 0.1–0.2–0.3–0.4 mm/rev - Infinitely variable speed adjustment * With digital speed display - Multi-speed (pole-changing) drive motor - Clockwise rotation of the drill spindle - Coolant system with a separate tank - 1x machine vise * Jaw width 150 mm / opening width 160 mm - EMERGENCY STOP button on the front - Operating manual (PDF)

Condition: used, Year of construction: 2021, Drilling capacity in St 60 55 mm threading in St 60 M 30 M 36 Short spindle MK 4 spindle stroke 140 mm throat 300 mm column diameter 145 mm Machine table - usable table surface 615x430 mm T-Slots Amount - Width - Distance 2x14x224 mm distance spindle - column min./max. 150/735 mm feed 0,1 + 0,3 mm/U 0 stufenlos Spindle Speed 70-2.400 U/min. engine 3,0 kW machine weight ab. 380 kg Standard equipment: - 7" TFT LCD display with touch function: * Manual input of spindle speed set value * Actual speed display * Integrated drilling depth display with touch zero point transfer * Virtual drilling depth scale in the display * Machine status indicators and warnings on the display * Service information * Selectable operating language: DE/EN/FR/ES/IT/NL/RU - Thread cutting device, for thread cutting with stop, max. 6 threads/min (thread cutting capacity depending on spindle speed), thread depth adjustable via depth stop and on the TFT LCD display (4 tools) - Infinitely variable speed adjustment via adjustment lever - Spindle protection with electrical fuse - Three separate buttons for clockwise rotation - anticlockwise rotation - stop - Mushroom pushbutton (latching) for EMERGENCY STOP - Main switch, lockable Bwedpfsz I Ub Hex Anpow - Clockwise and counter-clockwise rotation via contactor control - Control voltage 24 V, protection class IP 54 - Paint finish: DD textured paint signal white RAL 9003, PANTONE 4545c, black Item 20.5 Foot switch in addition to the thread cutting device, for switching the direction of spindle rotation in the process. direction of rotation during the process Item 25. Coolant unit B, consisting of: separate container (33 l), pump with motor protection switch, complete armature motor protection switch, complete fitting Item 37.5 Technology calculator in the display The technology calculator guides you through the cutting task Determination of the cutting data using the following parameters: - Manufacturing process - Tool diameter - Cutting speed - Material table - Transfer function of the spindle speed as set value

Condition: used, Column drill press ALZMETALL Type AB 3 ES Machine No. 21703 Year of manufacture 1981 Drilling capacity 32 mm Spindle mount MK 3 - long quill Overhang 290 mm Quill stroke 160 mm Table size 510 x 300 mm Column diameter 115 mm Spindle speed 55 - 1450 rpm, infinitely variable Motor power 0.9 and 1.3 kW, pole-reversible - Spindle speed controlled via 2 gear stages, 2 motor speeds and infinitely variable via a variator gearbox - Pre-selection stage for high torque at low speeds - Tachometer for spindle speed - Table height adjustment via hand crank - Machine light - Emergency stop via foot pedal and rocker switch - Quick-change drill chuck 1 to 13 mm Space requirement L x W x H 1200 x 650 x 1900 mm Weight 400 kg Very good condition Machine tested with a drill bit Ø 30mm in steel - runs very well. Bwjdpfo Ah Igcox Anpow

Condition: good (used), functionality: fully functional, Alzmetall Alzstar 40/S Vario Pillar Drilling Machine Technical data: Manufacturer: Alzmetall Type: Alzstar 40/S Vario Machine: Pillar drilling machine Drilling capacity in steel E335 (St 60): 40 mm Thread cutting capacity in steel E335 (St 60): M24 Spindle mount: MK3 (Morse taper 3) Distance from spindle to column: 293 mm Table dimensions: 515 × 360 mm Bwedpfo Aggh Esx Anpow Distance from spindle to table: 117–701 mm Column diameter: 115 mm Spindle stroke: 120 mm Motor power: 1.45 / 1.9 kW Spindle speed: 160–2,250 rpm Motor speed: 1,500 / 3,000 rpm

Condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS GENERAL Manufacturer: Alzmetall Type: AB3/R Machine type: Radial drilling machine Machine number: 809 DRILLING PERFORMANCE AND DRIVE Speed range: 100–1,220 min⁻¹ Outreach: approx. 700 mm Bedpfxj Ad Db Ue Anpoww MACHINE DETAILS DIMENSIONS AND WEIGHT Length: 1,500 mm Width: 600 mm Height: 2,400 mm Weight: 2,500 kg

Condition: excellent (used), Year of construction: 2005, bore capacity in steel (diameter) 40.0 / 50.0 mm throat 300 mm bore stroke 160 mm threading M 30 in ST turning speeds 70.0 - 4.000 U/min table: 615 x 430 mm bore spindles - Morse Taper 4 Kurzspindel MK column diameter 145 mm feed 0.1-0.2-0.3-0.4 mm/U distance spindle /table 147 / 688 mm T-slots 2 x 14 x 224 mm engine output 1.8 / 2.9 kW weight 450 kg Machine height 1865 mm Current new price approx. 22.000 euros Special price upon request In well-maintained condition (!!) Features: - Robust pillar drilling machine - INDUSTRIAL GRADE - * Drive: V-belt - VARIO (variable speed) - - Automatic spindle feed * With electromagnetic feed clutch * 4 feed rates: 0.1, 0.2, 0.3, 0.4 mm/rev * Feed overload protection - Infinitely variable speed adjustment * Digital speed display - Tapping (thread-cutting) function - Emergency stop button (front-mounted) - Main power switch (front-mounted) - Original operating manual Included special accessories: - Adjustable machine work light - Tapping attachment with footswitch - Automatic drilling depth control * Includes: drilling depth programming, chip-breaking function, Bjdpfx Ano Afp A Hopeww . retract/clearance function (adjustable via digital potentiometer) . digital display (including drilling depth readout) - Fine adjustment for drilling depth and fixed stop * Setting increment: 0.1 mm - 4x anti-vibration machine mounts

Condition: used, Year of construction: 2009, machine/vehicle number: PRJ 040485, functionality: fully functional, rotational speed (max.): 4,300 rpm, rotational speed (min.): 225 rpm, overall weight: 260 kg, Equipment: CE marking, The ALZMETALL ALZSTAR 30/S is a robust, precise, and durable pillar drilling machine, particularly suitable for craft businesses, training workshops, and industrial workshops. It belongs to Alzmetall's more price-sensitive "Start-Up" series but still offers the manufacturer's accustomed industrial quality. Here are the most important technical data and features at a glance: Technical Data Feature Value / Specification Drilling capacity (in steel St 60) 30 mm Drilling capacity (in cast iron GG 20) 30 mm Thread cutting max. M 16 (steel) / M 20 (cast iron) Spindle mount MK 3 (short spindle) Spindle stroke (Z-axis) 140 mm Overhang 293 mm Column diameter 115 mm Machine table (support surface) 515 x 360 mm (with T-slots) Distance spindle - table min. 132 mm / max. 724 mm Feed By hand Motor power 1.0 / 1.6 kW Spindle speed (stepless) Depending on the option: 225 – 4,300 rpm or 100 – 1,800 rpm Machine weight approx. 260 kg Standard equipment & highlights Stepless speed adjustment: The speed can be adjusted steplessly using a mechanical variator, allowing for optimal adaptation to the respective material and drill diameter. Digital speed display: The current spindle speed is displayed clearly on the front of the machine. Bodpfx Anozdqdljpoww Thread cutting device: An integrated reversing switch enables quick switching between right-hand and left-hand rotation. Safety: The machine is equipped as standard with a locking mushroom-head push button for EMERGENCY STOP, a motor protection switch, and an electrically secured spindle guard. Note: Sold without warranty or guarantee. We assume no liability for the operational functionality of the machine. The sale is made excluding any liability for material defects, to the extent permitted by law.

Condition: good (used), Year of construction: 1985, machine/vehicle number: 22582, Offer 26330 Technical data: - Drilling capacity in steel ST 60: 28 mm - Drilling capacity in steel ST 60: 32 mm - Drill spindle mount: MK 3, long spindle - Drill spindle stroke: 180 mm - Drill spindle speeds, stepless: 65 - 1750 rpm - Overhang: 290 mm - Max. distance table - drill spindle: 620 mm - Table with 2 T-slots: 520 x 400 mm - Height adjustable via rack and pinion with hand crank - Drive: 400 V / 0.9 / 1.3 kW - Space requirement: approx. W 660 x H 1900 x D 700 mm - Weight: approx. 300 kg Bwodpfx Anj Ahhncjpsw - Includes: - Quick-change drill chuck 1-13 mm - Machine vice - Emergency stop button - Lighting

Condition: ready for operation (used), Year of construction: 1977, functionality: fully functional, serial number 2934 weight 709 kg feed ja m/min Bwjdpfx Asztfytonpow taper MK 3

Condition: used, Year of construction: 1980, machine/vehicle number: 17209, functionality: fully functional, power: 1.5 kW (2.04 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, spindle mount: MK 3, height adjustment type: mechanical, rotational speed (max.): 1,750 rpm, rotational speed (min.): 130 rpm, total height: 2,000 mm, throat depth: 290 mm, Equipment: rotational speed infinitely variable, Used column drill press Manufacturer: Alzmetall Type: AB 3 ESV Machine number: 17209 Year of manufacture: 1980 Drilling capacity in cast iron: Ø 35 mm Drilling capacity in steel (diameter): 28 mm Spindle speed via 2 gear stages, 2 motor speeds, and continuously variable via a variator gear 130 - 1750 rpm Spindle taper: MK 3 Feed rate: 0.1; 0.2; 0.3 manually/automatically mm/rev Distance spindle/table min/max: 80 - 680 mm Bedpfx Anszldqujpeww Table clamping surface: 500 x 370 mm Table rotatable: 360° Drill table adjustment: 600 vertical mm Overhang: 290 mm Quill stroke: 165 mm Column diameter: Ø 120 mm Equipment: - Coolant system - Speed indicator - Work light - Röhm Spiro quick-change chuck 1-13 mm - Ejector on chain - Emergency stop button Machine weight approx.: 285 kg Machine dimensions approx.: 0.9 x 0.6 x 1.9 m (LxWxH)

Condition: good (used), Year of construction: 1979, functionality: fully functional, spindle mount: MK 3, For sale is a pillar drilling machine from the brand Alzmetall in good, used condition, as can be seen in the pictures. Technical data: • Manufacturer: Alzmetall • Model: AB3-E • Speed: approx. 125 - 3,150 rpm • Spindle stroke: approx. 180 mm • Table size: approx. 520x400 mm • Year of manufacture: 1979 • Weight: approx. 360 kg • Coolant pump can be connected • Condition: Used, functional The machine can be inspected and tested at any time! Shipping costs via freight forwarder: approx. €190 International buyers are welcome! You will receive an invoice with VAT shown. Inspection/collection is possible by arrangement in 42855 Remscheid. Sale ex works 42855 Remscheid, free loading. Errors in technical data and prior sale reserved. Bwodpfx Aszvrmlsnpsw

Condition: ready for operation (used), functionality: fully functional, power: 2.2 kW (2.99 HP), For sale is a robust and reliable Alzmetall AB 35 S pillar drilling machine, previously used in an industrial setting. The machine is characterized by its stable construction and high reliability, making it ideally suited for workshops, maintenance, toolmaking, and mechanical engineering. Technical data: Manufacturer: Alzmetall Type: AB 35 S Pillar drilling machine Motor power: 2.2 kW Voltage: 220/380 V Multi-stage speed adjustment Drilling table, height-adjustable Foot switch / Emergency stop Condition: Used Dismantled or removed from ongoing operation Good condition, considering its age Sold as is Scope of delivery: Machine complete as shown in the picture Foot switch Accessories according to photos Inspection Inspection possible by appointment. Bwsdpfx Anszwnrtepew Important terms and conditions: Please note that the sale of this machine is only possible under the following conditions: • Sale exclusively to end-users/manufacturing companies (no resale to dealers) – corresponding company profile required • Sale only within Germany Sales/transfer conditions: • Dismantling, removal, and transport are the responsibility of the buyer and at their own risk. • The buyer is responsible for providing personnel, tools, and transport equipment. The personnel must only work with appropriate personal protective equipment, and only trained personnel may be used.

Condition: defective spare-parts repository (used), Year of construction: 1978, functionality: not functional, ALZMETALL AB4HST Pillar Drilling Machine – Defective – Year of Manufacture 1978 For sale is an ALZMETALL AB4HST pillar drilling machine, year of manufacture 1978. The motor starts, but significant clicking noises occur during operation. The machine is therefore not ready for use and should be repaired before further use. The exact defect has not been investigated. The machine is therefore sold as a defective unit, as a project for hobbyists, or for spare parts. Technical data: Manufacturer: ALZMETALL Type: AB4HST Year of manufacture: 1978 Machine type: Pillar drilling machine Inspection possible by appointment Bwjdj Afxuvepfx Anpew Loading can be assisted Sale at the location 35708 Haiger No guarantee, warranty, or return Due to the defect, the machine is sold exclusively as requiring repair. Errors and prior sale excepted.