Used Alzmetall alzstar 30 s for sale

ALZMETALL ALZSTAR 30/S

new

Call

bore capacity in steel (diameter) 30,0 mm throat 293 mm bore stroke 140 mm morse taper 3 MK table: 514 x 360 mm turning speeds 225 - 4.300 U/min engine output 1,0 / 1,6 kW column diameter 115 mm weight 260 kg Machine height 1.790 mm Furnishing: - stepless speed adjustment - Reversing switch for R / L run - digital speed display - Connector and cable mounted - Spindle protection with electr. validation - 2 mtr. Connection cable with plug 16A Beobzzhwql

Listing

Sankt Egidien

8017 km

br. pillar drilling machine

Alzmetall AlzSTAR 30/S

new

Call

Please note!!! New machine! Will be ordered only after receipt of order!!! Drilling capacity steel E335 (St 60): 30 mm Thread cutting Steel E335 (St 60): M 16 Cast iron EN-GJL-200 (GG20): M 20 Short spindle: MK 3 spindle stroke: 140 mm throat depth: 293 mm column diameter: 115 mm machine table, usable support: 514 x 360 mm T-slots, number x width x distance: 2 x 14 x 224 mm distance spindle-table min./max. 132/724 mm feed: manual Machine height without options approx. : 1770 mm ...

Listing

Günzburg

8038 km

ALZMETALL ALZSTAR 30/S

2001

good (used)

Call

Drilling capacity in St 60 30 mm Short spindle MK 3 Hirbulaga drilling stroke 140 mm throat 293 mm column diameter 115 mm Machine table - usable support 514x360 mm distance spindle-machine table min./max. 132/724 mm Manual feed spindle speed 225-4300 rpm total power requirement 1,0/1,6 kW machine weight approx. 260 kg Special equipment: - Coolant device B Standard equipment: - Mushroom pushbutton (latching) for EMERGENCY STOP - Reversing switch for right/left rotation - motor protection switch...

Listing

Alzmetall Alzstar 30/S Säulenbohrmaschine

Offenburg

7893 km

Alzmetall Alzstar 30/S Säulenbohrmaschine

new

Call

Alzmetall Alzstar 30/s pillar drilling machine Manufacturer: Alzmetall Cdcafuc0bs Type: Alzstar 30/S Condition: new drilling capacity steel E335 (St 60) 30 mm Threading steel E335 (St 60) M 16 Cast iron EN-GJL-200 (GG20) M 20 Short spindle MK 3 spindle stroke 140 mm throat 293 mm column diameter 115 mm machine table, usable support 514 x 360 mm T-slots, number x width x distance 2 x 14 x 224 mm distance spindle-table min./max. 132/724 mm feed manual Machine height without options approx. 1770 m...

Discover more used machines

Pillar drilling machines 30-39mm bore capacity

Pillar drill

Pillar drilling machine

Box column drill

Box column drilling machine

Pillar drilling machines 40-49mm bore capacity

Alzmetall alzstar 18

Alzmetall ax3

Alzmetall

Alzmetall baz 35

Listing

Ahaus

7617 km

Bench Drilling Machine

ALZMETALL ALZSTAR 18-T/S

new

Call

bore capacity in steel (diameter) 18,0 mm throat 190 mm bore stroke 80 mm morse taper 2 Kurzspindel MK Nloix turning speeds 225 - 4.300 U/min voltage 400 / 50 Hz Volt table: 300 x 240 mm column diameter 65 mm engine output 0,37 / 0,55 kW weight 110 kg Furnishing: - Large spindle speed range - stepless speed adjustment - machined base plate - Electrically secured spindle protection - Main switch lockable with motor protection switch - Reversing switch for clockwise and counterclockwise rotati...

Listing

Oberlangen

7584 km

Alzmetall ALZSTAR 40/S

2007

used

Call

Column drilling machine used Make: Alzmetall model Alzstar 40 S year of construction: 2007 drilling capacity in steel (ST60) 40 mm thread cutting ST 60 M 24 spindle mounting MK 3 spindle stroke 120 mm throat 293 mm column diameter 115 mm motor 160-2250 rpm Power1,45 / 1,9 kW F2fana09 weight 270 kg

Listing

Sankt Egidien

8017 km

Bench drilling machine

Alzmetall Alzstar 18-T/S

new

Call

Please note!!! New machine! Will be ordered only after receipt of order!!! Alzstar 18-T/S Drilling tool steel E335 (St 60): 18 mm Tapping steel (St 60): M12 Cast iron (EN-GJL-200): M14 Short spindle: MK 2 spindle stroke: 80 mm throat depth: 190 mm column diameter: 65 mm machine table, usable support: 300 x 240 mm T-slots, number x width x distance: 2 x 12 x 80 mm distance spindle-table min./max. 75/357 mm feed: manual Machine height without options approx.: 840 mm net weight approx.: 110 kg...

Listing

Offenburg

(dealership location)

7893 km

Drill

Alzmetall Alzstar 40/S

new

Call

Column drilling machine Alzmetall Alzstar 40/S Manufacturer: Alzmetall Type: Alzstar 40/S Condition: new drilling capacity steel E335 (St 60) 40 mm short spindle MK 3 spindle stroke 120 mm throat 293 mm Ps9hhe column diameter 115 mm Machine table, usable support 514 x 360 mm T-slots, number x width x distance 2 x 14 x 224 mm distance spindle-table min./max. 117/701 mm Feed manual Machine height without options approx. 1840 mm Net weight approx. 270 kg Spindle speed rpm 160-2250

Listing

Ahaus

7617 km

ALZMETALL ALZSTAR 23/S

new

Call

bore capacity in steel (diameter) 23,0 mm throat 250 mm bore stroke 100 mm morse taper 2 MK table: 370 x 300 mm turning speeds 225 - 4.300 U/min engine output 0,6/0,95 kW column diameter 90 mm weight 175 kg Machine height 1770 mm Furnishing : - Mushroom pushbutton (latching) for EMERGENCY STOP Ciqpghfbpc - Reversing switch for clockwise and counterclockwise rotation - Motor protection switch - Infinitely variable speed adjustment - Digital speed display - Protection class IP 54 - Connection p...

Listing

Niederlangen

7585 km

ALZMETALL ALZSTAR 30 iTRONIC

new

Call

bore capacity in steel (diameter) 30 mm throat 293 mm bore stroke 140 mm spindle taper MT 3 column diameter 115 mm table surface area 514 x 360 mm Becw3m2s spindle turning speed - stepless 225 - 4300 U/min total power requirement 1,0 / 1,6 kW weight of the machine ca. 260 kg dimensions of the machine ca. H: 1790 mm

Listing

Ahaus

7617 km

High-performance pillar drilling machine

ALZMETALL ALZSTAR 30 iTRONIC

new

Call

bore capacity in steel (diameter) 30,0 mm throat 293 mm bore stroke 140 mm morse taper 3 MK table: 514 x 360 mm turning speeds 225 - 4.300 U/min engine output 1,0 / 1,6 kW column diameter 115 mm weight 260 kg Machine height 1.790 mm Vi2hgz2r ** NEW ALZMETALL MODEL RANGE ** 7 "TFT - LCD display with touch function: * Spindle speed setpoint * Actual speed display * Integrated drilling depth display * with touch zero point transfer * Virtual drilling depth scale in the display * Machine status ...

Listing

Offenburg

7893 km

Table drill

Alzmetall Alzstar 18-T/s I Neu ab Lager

new

Call

ALZMETALL Alzstar 18-T/S, Manufacturer. Alzmetall Type: Alzstar 18-T/S Condition: New Drilling capacity in St 60: 18 mm, Thread cutting in St 60: M 12, thread cutting in GG 20: M 14, short spindle: MK 2, spindle speed: 225-4,300 rpm, spindle stroke: 80 mm, throat depth: 190 mm, column diameter: 65 mm, Machine table - usable support: 300x240 mm, T-slots number - width - distance: 2 x12 x80 mm, distance spindle-machine table min/max: 75/357 mm, Machine base plate usable support: 300x240 mm, T-slot...

Listing

Rödermark

7854 km

ALZMETALL Alzstar 40/1912 S

1998

good (used)

Call

Offer 22399 Ink2fcp Technical data: - Drilling capacity in steel St 60 32 mm - drilling capacity in steel St 60 40 mm - Drilling spindle mounting long spindle MK 3 - Drilling spindle speeds AZ gear infinitely variable - in 2 speed series 160 - 2250 rpm - drilling spindle stroke 120 mm - throat 290 mm - column diameter 115 mm - table with 2 T-slots 540 x 400 mm - distance table drilling spindle min / max 35 / 640 mm - distance drilling spindle - foot plate approx. 1150 mm - right ...

Listing

Offenburg

7893 km

Alzmetall Alzstar 23/S NEU

new

Call

ALZMETALL Column drilling machine Alzstar 23 S Manufacturer: Alzmetall Type: Alzstar 23 S Condition: NEW drilling capacity steel E335 (St 60) 23 mm Threading steel E335 (St 60) M 14 Cast iron EN-GJL-200 (GG20) M 16 short spindle MK 2 spindle stroke 100 mm throat 250 mm column diameter 90 mm machine table, usable support 370 x 300 mm T-slots, number x width x distance 2 x 14 x 160 mm distance spindle-table min./max. 140/670 mm feed manual Machine height without options approx. 1770 mm net weight ...

Listing

Reiden

7976 km

Alzmetall AB 5/S

excellent (used)

Call

Drilling capacity in steel / cast iron 50/65 mm Drilling capacity in steel 70 mm Feed 0.1 - 0.54 mm / Rev Speed 62-1240 RPM Recording MK 5 spindle stroke (drilling depth) 240 mm Bd7pta2sbi Usable projection 385 mm Table 800 x 680 mm Spindle head diameter 70 mm Height 2350 mm the machine

Listing

Ahaus

7617 km

Column drilling machine ALZMETALL

ALZMETALL AB 5/S

used

Call

bore capacity in steel (diameter) 50,0 / 60,0 mm throat 385 mm bore stroke 240 mm turning speeds 80 - 1600 U/min table-size Ø 660 mm morse taper MK 5 feed range 0,1/0,14/0,2/0,28/0,4 mm/U Be0t3mkc bore capacity in cast iron 60,0 mm total power requirement ca. 4,0 kW weight of the machine ca. 1.250 kg range L-W-H 840 x 1600 x 2500 mm Furnishing : - heavy / robust pillar drilling machine - automatic spindle feed * with adjustable feed ranges - Thread cutting device * with adjustable switching ...

Listing

Waiblingen

7958 km

ALZMETALL AX 3/S

2022

new

Call

ALZMETALLColumn drilling machine AX 3/S Drilling capacity in steel (St60) 40mm, spindle speed: 160-2250 rpm, Cg0i9kbema short spindle MK3, spindle stroke: 120mm, throat: 293mm, column diameter: 115mm, machine table usable support: 515x360mm, with T-slots 2 x 14mm x 224mm, distance spindle-table min./max. 117/701mm, machine table height adjustment by hand crank, feed by hand, machine height without options: 1840mm, net weight: 260 kg. Standard equipment: Main switch Mushroom push button...

Listing

Offenburg

7893 km

Alzmetall AX 3/S

1998

good (used)

Call

For sale: A column drill Alzmetall AX 3 S from 1998 in a good used condition with foot pedal for tapping and machine light. Column drilling machine Alzmetall AX3S Etffbhv Manufacturer: Alzmetall Type: AX3S Year of manufacture: 1998 Condition: good, used speed range: 160 - 2250 rpm drilling capacity (St60) 40 mm Thread cutting (St60) M 24 Thread cutting in cast iron (EN-GJL-200)M30 Chuck/tool holder MK 3 spindle stroke 120 mm throat 293 mm column diameter 115 mm distance spindle-table min./max. 1...

Listing

Bühl

7895 km

ALZMETALL AB 5/S

1956

used

Call

bore capacity in steel (diameter) 50 mm throat 385 mm bore stroke 240 mm table surface area ø 500 mm spindle taper MT 5 spindle turning speed range 40 - 800 U/min feeds 0,1/0,14/0,2/0,28/0,4 mm/U column diameter 220 mm distance between table/spindle max. 670 mm distance spindle/base plate 1180 mm total power requirement 4 kW weight of the machine ca. 1,4 t dimensions of machine L x W x H 1,5 x 0,75 x 2,4 m Hbwadfmva Accessories: drill chuck, coolant

Listing

Burgoberbach

8004 km

Drilling machines

Alzmetall AB 45/S

1983

excellent (used)

8,750 €

3-fold gang drilling machine

Call

Sold is an Alzmetall AB 45 S in very good condition To the machine there is a fixed mounted cross table All joints, adjustments and cranks are smooth running All functions are operational The mentioned price is calculated from the good condition of the machine, the mounted cross table and the functional full equipment (e.g. tapping function). Electromagnetic feed clutch with overload protection and electric handle cross switch Drilling capacity steel ST 60 (v=20m/min s=0,3mm/rev) 40 mm Drilli...

Listing

Staufenberg

7810 km

ALZMETALL AX 2/S (Bohrl. 23 mm)

1994

good (used)

Call

3-fold line drilling machine make ALZMETALL type AX 2/S year of manufacture 1991 technical data: drilling capacity steel 18 mm drilling capacity cast iron 23 mm Spindle speed infinitely variable 450 - 4300 rpm. B07lfkhgzz Feed by hand Spindle adaptor MK 2 spindle stroke 100 mm throat 250 mm column diameter 90 mm clamping surface of the table 1520 x 940 mm Motor power per head 0,55 kW outer dimensions L x W x H approx. 2100 x 1000 x 1800 mm total weight approx. 800 kg with - digital speed display...

Listing

Waiblingen

7958 km

Bench drill ALZMETALL AX 2-T/S

ALZMETALL AX 2-T/S

new

Call

ALZMETALL bench drilling machine drilling capacity in steel 23mm Short spindle MK2, spindle stroke: 100mm, throat: 250mm, column diameter: 90mm, machine table usable support: 370x300mm, with T-slots 2 x 14mm x 160mm, distance spindle-table min./max. 125/455mm, machine table height adjustment via hand crank, machine table base plate, usable support: 320x250mm, with T-slots 2 x 14mm x 160mm, distance spindle-base plate min./max. 625/625mm, feed by hand, machine height without options: 1095mm, net ...

Listing

Staufenberg

7810 km

2-fold row drilling machine

ALZMETALL AX 2/S (Bohrl. 18 mm)

1991

good (used)

Call

2-fold line drilling machine make ALZMETALL type AX 2/S make # 420/1 and 420/2, year of construction 1991 technical data: Wwspgir9 drilling capacity steel 18 mm drilling capacity cast iron 23 mm spindle speed stepless 450 - 4300 rpm. Feed by hand spindle mounting MK 2 spindle stroke 90 mm throat 250 mm column diameter 90 mm clamping surface of the table 635 x 335 mm motor power per head 0,55 kW outer dimensions L x W x H approx. 1700 x 870 x 1550 mm total weight approx. 500 kg with - foot switch...

Listing

Niederlangen

7585 km

ALZMETALL ALZSTAR 40 iTRONIC - V

new

Call

bore capacity in steel (diameter) 40 mm throat 293 mm bore stroke 120 mm spindle taper MT 3 column diameter 115 mm table surface area 514 x 360 mm spindle turning speed - stepless 160 - 2250 U/min total power requirement 1,45 / 1,90 kW weight of the machine ca. 285 kg dimensions of the machine ca. H: 1840 mm - 7"TFT LCD display with touch function: * Manual input of spindle speed setpoint * Speed display actual value * Integrated drilling depth display with touch zero point transfer * Virtua...

Listing

Hessisch Lichtenau

7826 km

ALZMETALL AB 60 S

1987

used

7,000 €

Call

Column drilling machine ALZMETALL type from 60 S Masch. No. 228 built in 1987 Drilling capacity in steel 65 mm Bdnlrr20vw Drilling capacity in cast iron 75 mm Spindle mount Mt 5 - short sleeve Throat depth 400 mm Pinolhub 240 mm Table size 730 x 540 mm Column diameter 260 mm 40-1200 RPM infinitely variable spindle speed Motor power 5 and 7.5 kW pole-shift bar Power supply 400 Volt, 50 Hz -automatic feed in 5 levels of 0.1 0,14-0,2 0.28 0.4 mm / Rev -Transmission level for high torque at low spee...

Listing

Ahaus

7617 km

ALZMETALL ALZSTAR 40 iTRONIC -V

new

Call

bore capacity in steel (diameter) 40,0 mm throat 293 mm bore stroke 120 mm morse taper 3 MK table: 514 x 360 mm turning speeds 160 - 2250 U/min engine output 1,45/1,90 kW column diameter 115 mm feed 0,10 + 0,20 mm/U T-slots 2 x 14 x 224 mm weight 285 kg Machine height 1840 mm ** NEW ALZMETALL MODEL RANGE ** 7 "TFT - LCD display with touch function: * Spindle speed setpoint * Actual speed display * Integrated drilling depth display * with touch zero point transfer * Virtual drilling depth sca...

Listing

Velen-Ramsdorf

(dealership location)

7624 km

ALZMETALL Alzstar 40/SV

new

Call

Drilling capacity in St 60 40 mm threading in St 60 M 24 mm threading in GG 20 M 30 bore stroke 120 mm Short spindle MK 3 throat 293 mm column diameter 115 mm Machine table - usable table surface 514 x 360 mm T-Slots Amount - Width - Distance 2 x 14 x 224 mm Distance spindle - machine table min./max. 117 / 701 mm feed 0,10 + 0,20 mm/U spindle turning speed range 160 - 2250 UpM total power requirement 1,45 / 1,9 kW height of the machine 1840 mm weight of the machine ca. 285 kg Btplxdpsqt Sta...

Listing

Willich

7640 km

Upright Drilling Machine

ALZMETALL AB 5 S

1980

used

Call

Listing

Oberlangen

7584 km

Alzmetall ALZSTAR 40/SV

2022

new

Call

Column drilling machine Make: Alzmetall Model: Alzstar 40 SV Technical data spindle speed 160-2250 rpm. column diameter 115 mm machine table usable 514x360 mm drilling capacity in steel (ST60) 40 mm threading capacity M 24 spindle stroke 120 mm throat 293 mm motor power 1,45/1,9 kW spindle guard with electrical protection speed adjustment stepless emergency button (mushroom button) reversing switch for clockwise and anticlockwise rotation motor protection switch short spindle MK 3 Cf9pvvvj9m acc...

Listing

Niederlangen

7585 km

High-performance horizontal boring mill

ALZMETALL AB 35 S

1984

used

Call

bore capacity in steel (diameter) 35 mm throat 300 mm bore stroke 180 mm turning speeds 55 - 1450 U/min spindle taper MT 4 column diameter 145 mm table surface area 600 x 450 mm B9l9pzfe total power requirement 2,2 kW weight of the machine ca. 500 kg dimensions of the machine ca. 800 x 1000 x 2000 mm - automatic spindle feed - Stepless speed adjustment - Adjustable drilling depth stop - Machine table with T-slots - Foot switch for right-left rotation - Emergency stop switch - drill chuck

Listing

ALZMETALL Abomat 30 mit Revolverbohrkopf

Mörsdorf

7965 km

ALZMETALL Abomat 30 mit Revolverbohrkopf

1981

good (used)

Call

High performance horizontal boring mill make ALZMETALL type Abomat 30 make # 346, year of construction 1981 Technical data: Turret boring head number of tool holders 6-fold drilling capacity 35 mm throat 330 mm spindle mounting MK 4 longitudinal table size 500 adjustment travel 540 mm Rotary indexing table Operation manual-hydraulic diameter 600 mm further technical data: machining length min/max. 470/ 1170 mm insertion height of the workpiece 1223 mm center height 235 mm main motor 3,2 kW hydr...

Listing

Ahaus

7617 km

ALZMETALL ALZSTAR 40 SV

new

Call

bore capacity in steel (diameter) 40,0 mm throat 293 mm bore stroke 120 mm morse taper 3 MK table: 514 x 360 mm turning speeds 160 - 2.250 U/min Beob0cy3em column diameter 115 mm feed 0,10 + 0,20 mm/U total power requirement 1,45 / 1,9 kW weight 285 kg range L-W-H 0,5 x 0,8 x 1,84 mm Furnishing: - autom. Feed 0.10 + 0.20 mm / rev - stepless speed adjustment - Short spindle MK 3 - Mushroom pushbutton (latching) for EMERGENCY STOP - Reversing switch for clockwise and counterclockwise rotation -...

Listing

Sankt Egidien

8017 km

ALZMETALL ALZSTAR 40 / SV

new

Call

Please note!!! New machine! Will be ordered only after receipt of order!!! Table size: 514 x 360 mm spindle speed: 160 - 2250 rpm Emzwixu spindle mounting: MK 3 spindle stroke: 120 mm feed rate: 0,1 and 0,2 mm/rev spindle throat: 293 mm drilling capacity: steel ST 60 32 mm, cast iron 38 mm drilling capacity: steel ST 60 40 mm Threading: Steel St 60 M 24, Cast iron M 30 distance spindle/table: min. 117 / max. 701 mm Connected load: 2 KW weight: 0,29 t Right-left rotation partly immediately avai...

Listing

Offenburg

7893 km

NEW pillar drilling machine

Alzmetall Alzstar 40/SV I Neu ab Lager

new

Call

Column drilling machine Alzmetall Alzstar 40/SV Manufacturer: Alzmetall Type: Alzstar 40/SV B2rfuixow Condition: new Technical data: Column diameter: 115 mm Machine table (usable support): 514 x 360 mm T-slots (number x width x distance): 2 x 14 x 224 mm distance spindle-table (min./max.): 117 / 701 mm 2 feeds: 0.1 + 0.2 mm/rev. height (mm): approx. 1840 drilling capacity St 60 (mm): 40 spindle stroke (mm): 120 throat (mm): 293 motor (kW): 1,45 / 1,9 Speed range (r/min): 160 - 2250 weight (kg): ...

Listing

Kreis Bergstraße, Deutschland

7863 km

Drilling Machine MK 4

Alzmetall AB 35 S

used

Call

No. 5156: 1 used drilling machine MK 4 make Alzmetall type AB 35 S year of construction 1980 driving power: 1,4/2,2 kW speed range 65 - 1750min-1 Table 620 x 370 mm, Machined base plate 360 x 360 mm Coolant pump (without tank) Documentation Cdv7jdg7pl Space requirement approx. 800 x 1000 x 2000 mm Weight approx. 500 kg

Listing

Günzburg

8038 km

ALZMETALL ALZSTAR 40/SV

new

Call

Drilling capacity in St 60 40 mm Thread cutting in St 60 M 24 Thread cutting in GG 20 M 30 Short spindle MK 3 drilling stroke 120 mm throat 293 mm column diameter 115 mm machine table - usable support 514x360 mm T-slots number - width - distance 2 x 14 x 224 mm distance spindle-machine table min./max. 117/701 mm feed rate 0,10 + 0,20 mm/rev. spindle speeds 160-2,250 rpm Total power requirement 1.45/1.9 kW machine height 1840 mm Machine weight approx. 285 kg Standard equipment: - Mushroom pushbu...

Listing

Ahaus

7614 km

Alzmetall Alzstar 40 SV

new

7,240 €

High-performance pillar drilling machine

Call

== Exhibition machine == ALZMETALL column drill ALZSTAR 40 SV with coolant unit B (option 25) (consisting of separate tank (33l), pump with motor protection switch, complete fitting) standard equipment: Mushroom pushbutton, reversing switch (for right and left rotation), motor protection switch Infinitely variable speed adjustment, digital speed display, feed overload protection, protection class IP54, connector plug Spindle protection with electrical fuse technical data: drilling capacity steel...

Listing

Rödermark

7854 km

ALZMETALL AB 50 S

1980

good (used)

Call

Offer 22253 Technical data: - Drilling capacity in steel ST 60 50 mm - drilling capacity in steel ST 60 65 mm - Drilling spindle holder MK 5 - drilling spindle stroke 240 mm - throat 385 mm - table with 2 T-slots 650 mm - max. distance table - drilling spindle approx. 820 mm - max. distance base plate - drilling spindle 1325 mm - column diameter 220 mm Qz2n9 - feeds 0,10 - 0,14 - 0,20 - 0,28 - 0,40 mm/rev. - Threading device with foot switch in steel ST 60 M 42 - AZ gearbox steple...

Listing

Sankt Egidien

8017 km

pillar drilling machine pillar drilling machine

Alzmetall Alzstar 40 iTronic

2022

new

Call

Please note!!! New machine! Will be ordered only after receipt of order!!! Drilling capacity in steel (ST 60): 40 mm Threading steel E335 (St 60): M 24 Cast iron EN-GJL-200 (GG20): M 30 short spindle: MK 3 spindle stroke: 120 mm throat depth: 293 mm G0kpb8tew column diameter: 115 mm machine table, usable support: 514 x 360 mm T-slots, number x width x distance: 2 x 14 x 224 mm distance spindle-table min./max.: 117/701 mm feed: manual Machine height without options: approx. 1840 mm net weight: ...

Listing

Langwedel

7678 km

Alzmetall AB 35 S

good (used)

Call

Alzmetall AB 35 S very good condition Machine No.1136 MK 4 PInol stroke 160mm throat 300mm Jrmjbna electr. automatic feed 0,1/0,2/0,3 DZM speed stepless 65-1500u/min pole-changeable motor 2 gears coolant pump table clamping surface 500x370mm 2,2KW engine power 400kg weight height of the machine ca. 1880mm

Listing

Hövelhof

(dealership location)

7729 km

Drilling Machine

Alzmetall Abomat 30

1979

used

Call

Drilling capacity: 35 mm Mounting type: MK 4 Feed rate: 0.04, 0.07, 0.10 ,0.14, 0.26, 0.40 Ncuhkshkj Speeds: 63, 125, 180, 250, 355, 500, 710, 1400 Digital display in Z: 720 mm Cross table:x= 460 y= 280 mm drilling capacity in GG 20: 45 mm with cam control Cross table

Listing

Ahaus

7614 km

5-axis CNC machining center

Alzmetall ALZSTAR 40 iTRONIC-V

new

Call

ALZMETALL pillar drilling machine ALZSTAR 40 iTRONIC-V with coolant unit B (option 25) (consisting of separate tank (33l), pump with motor protection switch, complete fitting) standard equipment: 7" TFT - LCD display with touch function: manual input spindle speed setpoint, speed display actual value, Integrated drilling depth display with touch zero point acceptance, virtual drilling depth scale in the display, Machine status indications and warnings in the display, service information, Selecta...

Listing

Rödermark

7854 km

Bench drilling machine

Alzmetall AX 2 T-S

1997

good (used)

Call

Offer 22329 Technical data: - Drilling capacity in steel ST 60 23 mm - long spindle MK 2 - drilling spindle speed infinitely variable 270 - 1600 rpm - drilling spindle stroke 90 mm - throat 293 mm - table with 2 T-slots height adjustable by hand crank - table size 370 x 350 mm - Machined base plate with T - slots 300 x 250 mm - Max. Distance foot plate / table to spindle 450 / 300 mm - Emergency stop button - Space requirement approx. W 450 x H 990 x D 900 mm Cdb7yxtorq - Weight a...

Listing

Oberweis

8279 km

Radial drilling machine

Alzmetall AB30R-1000

1992

excellent (used)

7,900 €

EXW Fixed price plus VAT

Call

- Spindle sleeve feed - clamping table horizontal/vertical 90 ° inclinable - motorized height adjustment of the boom - 360 ° swivel range of the boom with pneumatic clamping - thread cutting device - coolant device - year of construction 1992 0rb0o Technical data: - Mounting: MK4 - drilling capacity in steel: 32 mm - drilling capacity in cast iron: 45 mm - Speed range: 25 - 3000 rpm (16 steps) - Drill feed range: 0.15 - 0.36 mm/rev (4 steps) - throat depth: 1000 mm - Pinol stroke: 200 mm - Elec...

Listing

Goldenstedt

(dealership location)

7654 km

Gang Drilling Machine

ALZMETALL AB4 SV, RVT 4/3

1978

used

Call

number of spindles 3 bore capacity in steel (diameter) 40 mm bore stroke 180 mm weight of the machine ca. 2,3 t Benrsuhob7

Listing

Walluf

7810 km

ALZMETALL GS 600E/5

2019

good (used)

Call

5-Axis CNC Machining Center - universal - Manufacturer: ALZMETALL Machine model: GS 600/E5 Control: Heidenhain TNC 640 Year of manufacture: 2019 Number of axes: 5 Cit0sei9ll TECHNICAL DATA Travels - X axis: (mm) 460 - Y axis: (mm) 600 - Z axis: (mm) 400 - A axis (swivel axis) -140 / +140 - C-axis (rotary axis) table 360 Rapid traverse: X/Y/Z (m/min) 30 Spindle - Internal coolant supply (IKZ): (bar) 80 - Spindle speed max: (rpm) 18,000 - Drive power: (kW) 26 (25%ED max.) - Torque: (Nm) 82 (25%ED...

Listing

Hessisch Lichtenau

7826 km

High performance drilling machine, production drilling machine

ALZMETALL Abomat 20

1995

used

3,800 €

High performance drilling machine, production drilling masc

Call

Production drilling machine make no. 449 year of construction 1995 drilling capacity in steel ST 60 25 mm drilling capacity in cast iron GG 20 30 mm spindle admission SK 40 - M16 throat 280 mm drilling slide stroke 500 mm Spindle distance max. 685 spindle distance min. 185 table size 490 x 400 mm spindle speed 2000 rpm autom. feed 224 mm/min. rapid traverse 4,5 m/min. motor power feed 0,18 kW motor power rapid traverse 0,75 kW motor power drilling spindle 1,5 kW Mains connection 400 Volt, 50 Hz ...

Listing

Feucht

8032 km

Saulenbohrmaschine

ALZMETALL AX 3s iTRONIC

as good as new (ex-display)

Call

Column drilling machine Make: ALZMETALL Model: AX 3s iTRONIC Condition: New machine Speed 100 - 1.800 rpm. equipped as standard with: - 7" TFT - LCD display with touch function: Manual input spindle speed setpoint, Speed display actual value, Integrated drilling depth display with Touch zero point transfer, Virtual drilling depth scale in the display, Machine status displays and warnings in display, service information, Coapmxvy Selectable operator language: DE/EN/FR/ES/IT/NL/...

Listing

Hessisch Lichtenau

7826 km

ALZMETALL Abomat 20

1996

used

4,800 €