5
Vert. Drilling and milling machining center make ALZMETALL type BAZ 15 CNC 60.40
Year of manufacture 2002
Technical data:
working range X / Y / Z 600 / 400 / 600 mm
clamping table 750 x 450 mm
drilling capacity ST 60 40 mm
Thread cutting ST 60 M 24
milling capacity ST 60 350 cm³/min
max. table load 500 kg
spindle mounting ISA 40
speed range (infinitely variable) 50 - 9000 rpm
rapid traverse X / Y / Z 40 / 40 / 30 m/min
tool magazine places 24
max. tool weight 4,0 kg
max. tool length 350 mm
tool ...
6
Two pieces Alzmetall BAZ 26/35 CNC were used for machining small parts made of steel and titanium. The special feature of the milling machine is its layout. On the left side the machine has a stable table for 3-axis machining and on the right side it is possible to machine material 5-axis. The milling machine has always been maintained with TPM and a detailed machine documentation is also available. There are no clamping devices included.
Ces0mut0tq
Technical data:
Control: Heidenhain 430
axes...
12
BAZ Alzmetall 35 CNC
B0swg9r7ny
incl. chip conveyor
data see photos
dimensions
LxWxH
3700x2270x2820 mm
chip conveyor
800x4000x1500 mm
5
bore capacity in steel (diameter) 34,0 mm
throat 300 mm
bore stroke 160 mm
morse taper 4 MK
table: 615 x 430 mm
bore capacity in cast iron 40,0 mm
threading 24 in ST M
threading 30 in GG M
turning speeds 100 - 1.800 U/min
feed 0,1-0,2-0,3-0,4 mm/U
Nloin
total power requirement 1,4 / 2,2 kW
weight 470 kg
height of the machine 1865 m
Furnishing:
- Electromagnetic feed clutch
- with overload protection and electrical cross-handle switch
- Lockable main switch
- Motor protection switch
- Mushroom...
4
Alzmetall AB 40 iTRONIC pillar drilling machine
Condition: new
drilling capacity steel E335 (ST 60) : 50 mm
Tapping steel: E335 (ST 60): M 30
spindle mounting: MK 4
spindle stroke: 160 mm
throat depth: 300 mm
column diameter: 145 mm
spindle speedL RPM: 70 - 4.000
power: 1,8 / 2,9 KW
Equipment:
7" TFT - LCD display with touch function
Thread cutting device
Speed adjustment stepless
Automatic speed control
Spindle protection
Three separate push buttons for clockwise - counterclockwise - stop
Mus...
3
number of spindles 3
Benrsuhob7
bore capacity in steel (diameter) 40 mm
bore stroke 180 mm
weight of the machine ca. 2,3 t
2
ALZMETALL bench drilling machine drilling capacity in steel 16mm
Short spindle MK2, spindle stroke: 80mm, throat: 190mm, column diameter: 65mm, machine table usable support: 300x240mm, with T-slots 2 x 12mm x 80mm, distance spindle-table min./max. 75/357mm, machine table height adjustment by hand crank, machine table base plate, usable support: 300x240mm, with T-slots 2 x 12mm x 80mm, distance spindle-base plate min./max. 437/437mm, feed by hand, machine height without options: 825mm, net weight...
4
serial number 436
turning speeds 40 - 800 U/min
Pvuhk3
table diameter ca. 600 mm
6
Production drilling machine
make no. 449 year of construction 1995
drilling capacity in steel ST 60 25 mm
drilling capacity in cast iron GG 20 30 mm
spindle admission SK 40 - M16
throat 280 mm
drilling slide stroke 500 mm
Spindle distance max. 685
spindle distance min. 185
table size 490 x 400 mm
spindle speed 2000 rpm
autom. feed 224 mm/min.
rapid traverse 4,5 m/min.
motor power feed 0,18 kW
motor power rapid traverse 0,75 kW
motor power drilling spindle 1,5 kW
Mains connection 400 Volt, 50 Hz
...
5
bore capacity in steel (diameter) 40,0 mm
throat 293 mm
bore stroke 120 mm
morse taper 3 MK
table: 514 x 360 mm
turning speeds 160 - 2.250 U/min
column diameter 115 mm
feed 0,10 + 0,20 mm/U
total power requirement 1,45 / 1,9 kW
weight 285 kg
range L-W-H 0,5 x 0,8 x 1,84 mm
Beob0cy3em
Furnishing:
- autom. Feed 0.10 + 0.20 mm / rev
- stepless speed adjustment
- Short spindle MK 3
- Mushroom pushbutton (latching) for EMERGENCY STOP
- Reversing switch for clockwise and counterclockwise rotation
-...
8
ALZMETALL Alzstar 18-T/S,
Manufacturer. Alzmetall
Type: Alzstar 18-T/S
Condition: New
Drilling capacity in St 60: 18 mm,
Thread cutting in St 60: M 12,
thread cutting in GG 20: M 14,
short spindle: MK 2,
spindle speed: 225-4,300 rpm,
spindle stroke: 80 mm,
throat depth: 190 mm,
column diameter: 65 mm,
Machine table - usable support: 300x240 mm,
T-slots number - width - distance: 2 x12 x80 mm,
distance spindle-machine table min/max: 75/357 mm,
Machine base plate usable support: 300x240 mm,
T-slot...
8
Alzmetall AC32AS pillar drilling machine
Technical data:
- Year of manufacture 1991 Machine no. 383
- clamping surface (left-right): 370 mm
- Clamping surface (front-rear): 614 mm
- Control: electronic control
- quill stroke: 180 mm
- speed range up to: 5000 rpm
- throat depth: 320mm
Qvzn0umd
- tool holder: MK 4
- Connected voltage: 400 V
- total height approx.: 2,06 m
- weight approx.: 600 kg
Offered is a used Alzmetall AC32AS pillar drilling machine fully functional. Take the opportunity ...
1
bore capacity in steel (diameter) 40 mm
throat 293 mm
bore stroke 120 mm
spindle taper MT 3
column diameter 115 mm
table surface area 514 x 360 mm
spindle turning speed - stepless 160 - 2250 U/min
total power requirement 1,45 / 1,90 kW
weight of the machine ca. 285 kg
dimensions of the machine ca. H: 1840 mm
- 7"TFT LCD display with touch function:
* Manual input of spindle speed setpoint
* Speed display actual value
* Integrated drilling depth display with touch zero point transfer
* Virtua...
9
Alzmetall Abomat 160
tool adaptor SK50
weight of the machine ca. 2 t
Control
Zcgkc
6
High performance drilling machine ALZMETALL type Abomat 20
Production drilling machine
make no. 452 year of construction 1996
E8mdsttn
drilling capacity in steel ST 60 25 mm
drilling capacity in cast iron GG 20 30 mm
spindle mounting SK 40 - M16
throat 280 mm
drilling slide stroke 500 mm
distance spindle nose to table 185 - 685 mm
table size 490 x 400 mm
Spindle speed 50 - 500 rpm. Stepless
Drill slide feed rate 20 - 224 mm/min. Stepless
Drill slide rapid traverse 4.5 m/min.
Motor power feed 0.1...
10
bore capacity in steel (diameter) 18,0 mm
Nloix
throat 190 mm
bore stroke 80 mm
morse taper 2 Kurzspindel MK
turning speeds 225 - 4.300 U/min
voltage 400 / 50 Hz Volt
table: 300 x 240 mm
column diameter 65 mm
engine output 0,37 / 0,55 kW
weight 110 kg
Furnishing:
- Large spindle speed range
- stepless speed adjustment
- machined base plate
- Electrically secured spindle protection
- Main switch lockable with motor protection switch
- Reversing switch for clockwise and counterclockwise rotati...
7
Column drilling machine make ALZMETALL type AB 4 HST
Machine. # 2312 Year of manufacture 1993
Technical data:
Drilling capacity in St 60 40 mm
drilling capacity in GG 20 55 mm
drilling capacity in St 60 55 mm
Spindle speed 50 - 1280 rpm.
spindle mounting MK 4
4 automatic feeds 0.15 - 0.36 mm/rev.
quill stroke 200 mm
throat 330 mm
distance table to spindle 938 mm
table size 742 x 594 mm
table stroke 680 mm
drive power 2,6 / 3,2 kW
dimensions L x W x H approx. 800 x 1300 x 2140 mm
weight approx....
10
bore capacity in steel (diameter) 45 mm
throat 330 mm
bore slide stroke 700 mm
table surface area 560 x 450 mm
bore spindle diameter /taper MK 4
Besq7z7sqt
bore spindle turning speed range 100 - 2240 U/min
bore feed range ja
total power requirement 3,3 / 4,1 kW
weight of the machine ca. 1,5 t
dimensions of the machine ca. 1,2 x 0,75 x 2,45 m
9
bore capacity in steel (diameter) 34,0 mm
throat 300 mm
bore stroke 160 mm
morse taper 4 MK
table: 615 x 430 mm
turning speeds 100 - 1.800 U/min
engine output 1,4 / 2,2 kW
column diameter 145 mm
thread M24 ST60
thread M30 GG20
feed 0,1-0,2-0,3-0,4 mm/U
weight 470 kg
Machine height 1865 mm
** NEW ALZMETALL MODEL RANGE **
7 "TFT - LCD display with touch function:
* Spindle speed setpoint
Cbazjfripe
* Actual speed display
* Integrated drilling depth display
* with touch zero point transfer
* Vi...
5
ja
ja
weight of the machine ca. 400 kg
B3dcoclwex
6
Column drilling machine ALZMETALL type from 60 S
Masch. No. 228 built in 1987
Drilling capacity in steel 65 mm
Drilling capacity in cast iron 75 mm
Spindle mount Mt 5 - short sleeve
Throat depth 400 mm
Pinolhub 240 mm
Table size 730 x 540 mm
Column diameter 260 mm
40-1200 RPM infinitely variable spindle speed
Motor power 5 and 7.5 kW pole-shift bar
Power supply 400 Volt, 50 Hz
-automatic feed in 5 levels of 0.1 0,14-0,2 0.28 0.4 mm / Rev
-Transmission level for high torque at low speeds
-Spindle...
10
bore capacity in steel (diameter) 9,0 mm
Kmfgyabr
throat 200 mm
bore stroke 40,0 mm
morse taper B16
turning speeds 390 - 6500 U/min
voltage 400 / 50 Hz Volt
table: 300 x 240 mm
column diameter 50,0 mm
threading M 8
T-slots 2 x 12 x 80 mm
distance spindle/base plate 110/250 mm
engine output 0,54 kW
weight 64,0 kg
range L-W-H 800 x 600 x 670 mm
** New price ~ 2,200 euros
** from a vocational school (!!)
Furnishing:
- Large spindle speed range
- Stepless speed adjustment
- manual spindle fee...
5
Radial drilling machine make ALZMETALL type AB 30 R/1000
Machine # 1802 Year of construction 1993
Technical data:
throat 1000 mm
drilling capacity in ST 60 32 mm
drilling capacity in GG 20 45 mm
Drilling capacity in ST 60 50 mm
Threading capacity M 30
Spindle mounting MK 4
12 spindle speeds 56- 2500 rpm.
4 automat. feeds 0,15-0,36 mm
spindle stroke 200 mm
diameter of the column 220 mm
drive power 1,3 kW
Qxwwt
weight approx. 1250 kg
with
- AZ thread cutting device
- coolant device
- central clam...
4
ALZMETALL pillar drilling machine drilling capacity in steel 30mm
Short spindle MK3, spindle stroke: 140mm, throat: 293mm, column diameter: 115mm, machine table usable support: 514x360mm, with T-slots 2 x 14mm x 224mm, distance spindle-table min./max. 132/724mm, machine table height adjustment by hand crank, feed by hand, machine height without options: 1790mm, net weight: 260 kg.
- Speed infinitely variable 100-1800 rpm
Standard equipment: Mushroom pushbutton (latching) for EMERGENCY STOP,
rev...
10
bore capacity in steel (diameter) 55,0 mm
throat 300 mm
bore stroke 140 mm
morse taper 4 MK
table: 615 x 430 mm
turning speeds 70 - 1.200 U/min
engine output 1,8 / 2,9 kW
column diameter 145 mm
thread M30 ST60
thread M36 GG20
feed 0,10 + 0,30 mm/U
weight 380 kg
Machine height 1850 mm
** NEW ALZMETALL MODEL RANGE **
7 "TFT - LCD display with touch function:
* Spindle speed setpoint
* Actual speed display
* Integrated drilling depth display
* with touch zero point transfer
* Virtual drilling d...
5
Drill press, drill press, stand drill, pillar drill
-Table size: 400 mm
-spindle taper: MK4
89axknski
-Projection: 320 mm
-Speeds: 80-700 rpm
-Columns: Ø 160 mm
-Spindle stroke: 175 mm
-VIP transmission
-Feed: 0.09-0.28 mm/rev
-Tachometer: defective
-Dimensions: 1100/500/H1960 mm
-Weight: 650 kg
6
Column drilling machine ALZMETALL type Alzstar 40 SV
machine no. 866/1912 year of construction 2001
drilling capacity 40 mm
spindle adaptor MK 3 - long spindle sleeve
throat 293 mm
pinol stroke 120 mm
table size 415 x 300 mm
spindle speed 160 - 2250 rpm infinitely variable
column diameter 110 mm
automatic feed 0,1 - 0,2 mm/rev.
motor power 1,5 and 1,9 kW pole changeable
Cdlx3yondr
mains connection 400 Volt, 50 Hz
- spindle speed via 2 motor speeds and stepless via variator gearbox
- right- left ...
10
bore capacity in steel (diameter) 40,0 mm
throat 293 mm
bore stroke 120 mm
morse taper 3 MK
table: 514 x 360 mm
turning speeds 160 - 2250 U/min
engine output 1,0 / 1,6 kW
column diameter 115 mm
thread M24 ST60
thread M30 GG20
feed 0,10 + 0,20 mm/U
weight 270 kg
Machine height 1840 mm
** NEW ALZMETALL MODEL RANGE **
7 "TFT - LCD display with touch function:
* Spindle speed setpoint
* Actual speed display
* Integrated drilling depth display
* with touch zero point transfer
* Virtual drilling d...
5
Boring power 25 mm
Boring depth max. 120 mm
Center of spindle to wall or column 295 mm
Column diameter mm
Size of table plate 400 x 300 mm
Distance spindle/table max. mm
Motor output 1,1 kW
turning speed range 3500 U/min
MK 3 |
power capacity 1,1 kW
dimensions 0,7 x 0,4 x 1,9 m
weight of the machine ca. 0,35 t
Bdb9kb7e
Used drilling machine with electrinic cotrol
- cross table manuall
- quill adjustable
- height adjustable table
- table can be swiveled away
5
bore capacity in steel (diameter) 50 mm
throat 385 mm
bore stroke 240 mm
table surface area ø 500 mm
spindle taper MT 5
spindle turning speed range 40 - 800 U/min
feeds 0,1/0,14/0,2/0,28/0,4 mm/U
column diameter 220 mm
distance between table/spindle max. 670 mm
distance spindle/base plate 1180 mm
total power requirement 4 kW
weight of the machine ca. 1,4 t
dimensions of machine L x W x H 1,5 x 0,75 x 2,4 m
Hbwadfmva
Accessories: drill chuck, coolant
10
bore capacity in steel (diameter) 40,0 mm
throat 293 mm
bore stroke 120 mm
morse taper 3 MK
table: 514 x 360 mm
turning speeds 80 - 1.125 U/min
Cyzsecw8
engine output 1,0 / 1,6 kW
column diameter 115 mm
thread M24 ST60
thread M30 GG20
feed 0,10 + 0,20 mm/U
weight 270 kg
Machine height 1840 mm
** NEW ALZMETALL MODEL RANGE **
7 "TFT - LCD display with touch function:
* Spindle speed setpoint
* Actual speed display
* Integrated drilling depth display
* with touch zero point transfer
* Virtual d...
5
Drill press, drill press, stand drill, pillar drill
-Speed display: (clock) defective
Nlgwh
-Table size: 315 mm
-spindle taper: MK3
-Projection: 285 mm
-Speeds: 200 - 1400 rpm
-Columns: Ø 130 mm
-Spindle stroke: 150 mm
-Gear: VIP
-Feed: 0.1-0.3 mm/rev
-Dimensions: 440/900/H1900 mm
-Weight: 408 kg
6
Column drilling machine ALZMETALL type AB 3 ESV
machine. No. 15967 Year of construction 1977
drilling capacity 32 mm
spindle mount MK 3 - short spindle sleeve
throat 290 mm
pinol stroke 160 mm
table size Ø 545 mm
column diameter 220 mm
spindle speed 55 - 1450 rpm infinitely variable
motor power 1 / 1,6 kW
Mains connection 380 Volt, 50 Hz.
- Spindle speed via 2 gear stages, 2 motor speeds and infinitely variable via variator gears
- Pre-feed stage for high torque at low speeds
- MK adapter from M...
9