Used Alzmetall Gs 1400 for sale (145)

Condition: ready for operation (used), Year of construction: 2008, travel distance X-axis: 800 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 800 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530 with smarT.NC, total height: 2,800 mm, total width: 2,250 mm, table width: 920 mm, table length: 900 mm, table load: 1,800 kg, overall weight: 14,000 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 40,000 W, number of axes: 3, This 3-axis Alzmetall GS 800/3 vertical machining centre was manufactured in 2008. It features an impressive X-axis travel of 800 mm, Y-axis travel of 800 mm, and Z-axis travel of 500 mm. The machine is equipped with a HEIDENHAIN iTNC 530 control and a robust table surface area of 920 x 900 mm, supporting a maximum table load of 1,800 kg. If you are looking to get high-quality machining capabilities, consider the Alzmetall GS 800/3 machine we have for sale. Contact us for further details. - Distance Spindle to Rigid Table: 150 – 650 mm - Table T-Slots: 9 T-slots according to DIN 650 in X-direction, 14 H12 width, 100 mm pitch, 14 H7 center alignment slot, table lowered by 80 mm - Spindle Type: Water-cooled high-frequency motor spindle with hybrid spindle bearings and oil-air lubrication - Spindle Taper: HSK-A63 according to DIN 69893 -- Max. Torque: 139 Nm at 25% duty cycle - Spindle Features: New spindle in 2025, thermal expansion compensation, sealing air seal, air blow through spindle center - Rapid Traverse (X/Y/Z): 45 m/min - Max. Acceleration (X/Y/Z): 10 m/s² - Max. Feed Force (X/Y/Z): 10 kN at 40% duty cycle - Measuring Systems: Dual direct linear measuring systems for X/Y, direct linear measuring system for Z - Positioning Accuracy (Tp): 0.007 mm according to DIN ISO 230-2 - Tool Magazine: Chain magazine with 33 tool positions - Tool Change System: Pick-up system - Max. Tool Diameter: 90 mm (full configuration) / 130 mm (with free adjacent positions) - Max. Tool Length: 300 mm - Max. Tool Weight: 10 kg - Max. Total Tool Weight: 160 kg - Tool Change Time: Approx. 2 seconds - Chip-to-Chip Time: Approx. 6 seconds - Operating Voltage: 3x 400 V - Mains Frequency: 50 Hz - Total Rated Current: 55 A - Mains Supply Fuses: 63 A gG - Required Supply Pressure: Min. 6 bar - Required Network System: TN network - Transport Dimensions: Approx. 2,250 mm (W) x 4,760 mm (D) x 2,800 mm (H) - Additional Equipment & Features: - HEIDENHAIN TS 640 3D touch probe with infrared transmission - HEIDENHAIN TT 140 automatic tool measurement - HR 410 electronic handwheel - Automatic roller shutter roof cover - Scraping-belt chip conveyor (for short metal chips up to 80 mm length) - All-round sheet steel enclosure - Stainless steel interior lining of the machining area - Work area lighting - Electrically secured horizontal sliding door with mechanical locking - Control cabinet cooling- Missing/Excluded Components: Coolant tank is NOT included (no coolant tank, no pumps, no chip flushing hose) Gsdpez R Sz Eofx Al Uokc

Condition: like new (used), Year of construction: 2019, functionality: fully functional, -Travel ranges: X-axis: 800mm Y-axis: 800mm Z-axis: 600mm -A-axis swivel range (2 torque motors): +/- 140° -Swivel axis A speed: Max. 50 min-1 -C-axis rotary range (1 torque motor): 360° (continuous) -Rotary table speed: Max. 100 min-1 -Table load: Max. 1000kg Gkodpfx Ajz Iy Swjl Ujc -Path control: Heidenhain TNC 640 -Tool holder: HSK-A63 -Spindle speed range, stepless: Max. 18,000 min-1 -Rapid traverse speed: Max. 60m/min -Additional tool magazine: 224 tool positions -Main magazine: 11 tool positions -Max. tool length in changer: 400mm -Max. tool diameter in changer: 130mm -Chip flushing hose -Chip conveyor flushing -Emulsion mist extraction system -Chip conveyor -Protective guard automatic: 840mm opening width -Compressed air supply: Min. 6 bar -Stand-alone cooling unit -Remote maintenance -Machine weight: 15,500 kg -Tool measurement: Blum Laser -3D machine model -IKZ water cooling: Max. 80 bar -Coolant tank volume: 1100 liters The image is an example.

Condition: used, functionality: fully functional, The ALZMETALL AX 2/S is the more compact sister machine to the ALZSTAR series. It is a professional, extremely precise bench or pillar drill (depending on the base), primarily used in precision engineering, training workshops, laboratories, and demanding workshops. While the ALZSTAR 30/S is designed for "rough" work with a drilling diameter of up to 30 mm, the AX 2/S focuses on compactness and maneuverability for smaller drilling diameters, without compromising the typical Alzmetall stability. Gksdpfx Alszdy Rzo Usc Technical data at a glance Feature | Value / Specification ----- | ----- Drilling capacity (in steel St 60) | 23 mm Thread cutting (optional) | max. M 14 (steel) / M 16 (cast iron) Spindle mount | MK 2 (short spindle) Spindle stroke (Z-axis) | 100 mm Overhang | 250 mm Column diameter | 90 mm Machine table (support) | 370 x 300 mm Feed | Manual Motor power | 0.6 / 0.95 kW Spindle speed (stepless) | Variant 1: 125 – 2,400 rpm | Variant 2: 225 – 4,300 rpm Machine weight | approx. 180 kg (net machine weight) Key features & equipment details Mechanically stepless drive: As with the larger sister model, the speed is adjusted steplessly and conveniently during operation via a mechanical control wheel (variator). Digital display: The spindle speed is displayed digitally on a clearly visible display on the head of the machine as standard. Compact size: With a net weight of approximately 180 kg, it is significantly lighter than the ALZSTAR 30/S (approx. 260 kg) and can still be transported or moved relatively easily if required. Safety features: A lockable main switch with motor protection, a locking emergency stop button, and the electrically protected spindle guard are also standard features. Note: Sold without warranty or guarantee. We assume no liability for the operational functionality of the machine. The sale is made excluding any liability for material defects, to the extent permitted by law.

Condition: not inspected (used), Year of construction: 1987, machine/vehicle number: 2834, functionality: unexamined, drilling depth: 180 mm, rotational speed (max.): 3,000 rpm, rotational speed (min.): 25 rpm, total width: 500 mm, total length: 1,100 mm, total height: 1,800 mm, overall weight: 400 kg, ALZMETALL AB 25 SV Bench Drill Gedpfx Alez Rw Rdj Uokc - including vise, jaw width: 160 mm FCA D-73529 Schwäbisch Gmünd - loaded onto a truck

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, input voltage: 400 V, total length: 14,000 mm, Equipment: documentation/manual, Alzmetall AB 26 drilling line with MKH CNC positioning and roller conveyors (2006) For sale: complete drilling line for profiles and strips, built around an Alzmetall AB 26 column drilling machine with an MKH CNC positioning system. The machine has been used in our production and is being sold due to workshop restructuring. Specifications: • Column drilling machine: Alzmetall AB 26, manufactured in 2006 • Digital display of spindle speed and drilling depth • Automatic spindle feed with depth adjustment • Coolant lubrication system • MKH CNC control with positioning carriage and gripper on guide rail • Pneumatic work piece clamping • Infeed and outfeed roller conveyors, total length approx. 14 m • Separate control cabinet with emergency stop and main switch • Connection values: 400V / compressed air 6-10 bar Condition: operational, can be demonstrated while running. Manual available. Godoz I Tahspfx Al Uokc Location: Waalwijk, Netherlands Availability: immediate / by arrangement Dismantling and loading: [by arrangement / buyer arranges transport / we assist with loading] Price: € 9,000 excl. VAT Inspection by appointment is possible.

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, Well, selling due to no usage. Gkodpfx Alez Ellwe Ujc

Condition: used, Year of construction: 2002, functionality: fully functional, spindle mount: MK 3, throat depth: 297 mm, overall weight: 680 kg, L.-No. 4.1-551 1 used Pillar Drilling Machine, Manufacturer: ALZMETALL, Model: AC 25, Year: 2002 Height-adjustable drilling head, fixed table, coolant device. Technical details: Drilling capacity steel/cast iron: 25/30 mm Spindle taper: MK 3 Feed: 35-1400 rpm Spindle stroke: 120 mm Spindle-column overhang: 297 mm Tool fitting: MK3 Gkedpfoy Hik Sjx Al Ujc Machine weight: 680 kg Technical data, accessories and description of the machine are not binding.

Condition: used, Year of construction: 2021, Drilling capacity in St 60 55 mm threading in St 60 M 30 M 36 Short spindle MK 4 spindle stroke 140 mm Gksdpfx Aloz I Ub Hs Ujc throat 300 mm column diameter 145 mm Machine table - usable table surface 615x430 mm T-Slots Amount - Width - Distance 2x14x224 mm distance spindle - column min./max. 150/735 mm feed 0,1 + 0,3 mm/U 0 stufenlos Spindle Speed 70-2.400 U/min. engine 3,0 kW machine weight ab. 380 kg Standard equipment: - 7" TFT LCD display with touch function: * Manual input of spindle speed set value * Actual speed display * Integrated drilling depth display with touch zero point transfer * Virtual drilling depth scale in the display * Machine status indicators and warnings on the display * Service information * Selectable operating language: DE/EN/FR/ES/IT/NL/RU - Thread cutting device, for thread cutting with stop, max. 6 threads/min (thread cutting capacity depending on spindle speed), thread depth adjustable via depth stop and on the TFT LCD display (4 tools) - Infinitely variable speed adjustment via adjustment lever - Spindle protection with electrical fuse - Three separate buttons for clockwise rotation - anticlockwise rotation - stop - Mushroom pushbutton (latching) for EMERGENCY STOP - Main switch, lockable - Clockwise and counter-clockwise rotation via contactor control - Control voltage 24 V, protection class IP 54 - Paint finish: DD textured paint signal white RAL 9003, PANTONE 4545c, black Item 20.5 Foot switch in addition to the thread cutting device, for switching the direction of spindle rotation in the process. direction of rotation during the process Item 25. Coolant unit B, consisting of: separate container (33 l), pump with motor protection switch, complete armature motor protection switch, complete fitting Item 37.5 Technology calculator in the display The technology calculator guides you through the cutting task Determination of the cutting data using the following parameters: - Manufacturing process - Tool diameter - Cutting speed - Material table - Transfer function of the spindle speed as set value

Condition: used, Year of construction: 1980, machine/vehicle number: 17209, functionality: fully functional, power: 1.5 kW (2.04 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, spindle mount: MK 3, height adjustment type: mechanical, rotational speed (max.): 1,750 rpm, rotational speed (min.): 130 rpm, total height: 2,000 mm, throat depth: 290 mm, Equipment: rotational speed infinitely variable, Used column drill press Manufacturer: Alzmetall Type: AB 3 ESV Machine number: 17209 Year of manufacture: 1980 Gkodezldquopfx Al Usc Drilling capacity in cast iron: Ø 35 mm Drilling capacity in steel (diameter): 28 mm Spindle speed via 2 gear stages, 2 motor speeds, and continuously variable via a variator gear 130 - 1750 rpm Spindle taper: MK 3 Feed rate: 0.1; 0.2; 0.3 manually/automatically mm/rev Distance spindle/table min/max: 80 - 680 mm Table clamping surface: 500 x 370 mm Table rotatable: 360° Drill table adjustment: 600 vertical mm Overhang: 290 mm Quill stroke: 165 mm Column diameter: Ø 120 mm Equipment: - Coolant system - Speed indicator - Work light - Röhm Spiro quick-change chuck 1-13 mm - Ejector on chain - Emergency stop button Machine weight approx.: 285 kg Machine dimensions approx.: 0.9 x 0.6 x 1.9 m (LxWxH)

Condition: used, Bench drill, gear drill ALZMETALL Type AB 40 ST Production drill Manufacturer No. 750 Year of manufacture 1994 Drilling capacity 40 mm Spindle mount MK 4 - short quill Overhang 325 mm Quill stroke 200 mm Table size 740 x 460 mm Height adjustment of drill head 700 mm Distance spindle-table max. 1015 mm Spindle speed 56 - 2500 rpm 12 gear stages Automatic feed 0.15 - 0.2 - 0.3 - 0.36 mm/rev Motor power 4 kW Gjdpfx Aoza Hzgsl Uokc Mains connection 380 Volt, 50 Hz - Spindle speed via 12 gear stages - Drilling and threading device with right and left rotation - Electric foot switch for switching the direction of rotation to left for thread cutting interruption - Rapid traverse via hydraulic quill movement - Semi-automatic operating sequence: rapid traverse - working feed - rapid return - Drill head height adjustment via hand crank - Table height adjustment via hand crank (table height from 740 to 1170 mm) - Coolant system - Control cabinet on the back of the machine - Mounted on a steel plate (1300 x 750 x 15 mm) with machine feet - Quick-change drill chuck METABO 3 to 16 mm - Operating manual and electrical diagram Overall height with drill head at the top 2750 mm Space requirement L x W x H 1400 x 850 x 2300 mm Weight 1250 kg Good condition

Condition: good (used), functionality: fully functional, spindle mount: MK 4, For sale is a pillar drill press from the brand Alzmetall in good, used condition, as can be seen in the pictures. Technical data: • Manufacturer: Alzmetall • Model: AB4-SV • Speed: approx. 60 - 765 rpm • Spindle stroke: approx. 180 mm • Feed speeds: 0.15 / 0.2 / 0.3 / 0.36 mm/rev • Table size: approx. 600 x 450 mm • With coolant pump • Connection: 16A CEE plug • Condition: Used, functional The machine can be inspected and tested at any time! Shipping costs via freight forwarder: approx. €190 International buyers are welcome! You will receive an invoice with VAT shown. Gjdpfxozqnuuj Al Uekc Inspection / collection is possible by arrangement in 42855 Remscheid. Sale from location 42855 Remscheid, free loading. Errors in technical data and prior sale reserved.

Condition: used, Year of construction: 2009, machine/vehicle number: PRJ 040485, functionality: fully functional, rotational speed (max.): 4,300 rpm, rotational speed (min.): 225 rpm, overall weight: 260 kg, Equipment: CE marking, The ALZMETALL ALZSTAR 30/S is a robust, precise, and durable pillar drilling machine, particularly suitable for craft businesses, training workshops, and industrial workshops. It belongs to Alzmetall's more price-sensitive "Start-Up" series but still offers the manufacturer's accustomed industrial quality. Here are the most important technical data and features at a glance: Technical Data Feature Value / Specification Drilling capacity (in steel St 60) 30 mm Drilling capacity (in cast iron GG 20) 30 mm Thread cutting max. M 16 (steel) / M 20 (cast iron) Spindle mount MK 3 (short spindle) Spindle stroke (Z-axis) 140 mm Overhang 293 mm Column diameter 115 mm Machine table (support surface) 515 x 360 mm (with T-slots) Distance spindle - table min. 132 mm / max. 724 mm Feed By hand Motor power 1.0 / 1.6 kW Spindle speed (stepless) Depending on the option: 225 – 4,300 rpm or 100 – 1,800 rpm Machine weight approx. 260 kg Standard equipment & highlights Stepless speed adjustment: The speed can be adjusted steplessly using a mechanical variator, allowing for optimal adaptation to the respective material and drill diameter. Gkodpfx Alszdqdlo Usc Digital speed display: The current spindle speed is displayed clearly on the front of the machine. Thread cutting device: An integrated reversing switch enables quick switching between right-hand and left-hand rotation. Safety: The machine is equipped as standard with a locking mushroom-head push button for EMERGENCY STOP, a motor protection switch, and an electrically secured spindle guard. Note: Sold without warranty or guarantee. We assume no liability for the operational functionality of the machine. The sale is made excluding any liability for material defects, to the extent permitted by law.

Condition: good (used), Alzmetall AC 32 Turret Double-Head Drilling Machine An extremely robust and rare double-head drilling machine based on two Alzmetall AC 32 drilling head units. This machine is a high-quality industrial design intended for highly efficient series or multi-stage machining. Instead of simple spindles, this machine is equipped with two separate tool turrets. This enables fully automatic machining cycles (e.g., centering, drilling, countersinking, threading) without the need for manual tool changes. Technical data & equipment (per head / overall machine): Manufacturer of drilling head units: Alzmetall (Germany) Model: AC 32 (Electronically controlled with digital display) Drilling capacity: max. 32 mm in steel Gkjdpfx Aljznic Us Ujc Threading capacity: max. M 24 / M 30 Tool changer: 2 x pivoting turrets with multiple stations Machine table: Solid, ground cast iron table with T-slots for flexible setup Safety: Complete enclosure of the working area (protective cabin) with viewing windows for optimal chip and splash protection Additional functions: Integrated coolant system, compressed air blow-off gun, central counterweight system for easy vertical adjustment of the entire beam More items – new and used – can be found in our shop! International shipping costs on request!

Condition: good (used), Year of construction: 1979, functionality: fully functional, spindle mount: MK 3, For sale is a column drill press made by Alzmetall in good, used condition, as can be seen in the pictures. Technical data: • Manufacturer: Alzmetall • Model: AB3-ES • Speed: approx. 65 - 1,750 rpm • Quill stroke: approx. 180 mm • Table size: approx. 515 x 415 mm • Year of manufacture: 1979 • With coolant pump • Condition: Used, functional Gksdpfx Alszvrt Ss Ujc The machine can be inspected and tested at any time! If interested, two identical machines are available! Shipping costs via freight carrier: approx. €190 Phone number: 01575 2236716 You will receive an invoice with VAT shown. Inspection/collection is possible by arrangement in 42855 Remscheid. Sale ex works 42855 Remscheid, free loading. Subject to errors in technical data and prior sale.

Condition: good (used), Column Drilling Machine ALZMETALL AB3 ESV Spindle: CM3 Rotation: 1 range 220 -800 RPM + 1 range 800-2900 RPM Table size: Length 615 mm x Width 470 mm Spindle travel: 160 mm Throat depth: 280 mm Speed adjustment by belt drive Rotative table at 360° Automatic Descent 3 speeds: 0,006 - 0,12 - 0,18 mm/min. Lubricant pump Gsdpfx Alsz Nwb Hj Uekc Voltage: 380 V Width: 800 mm Depth: 1300 mm Total height: 1900 mm Weight: approx 800 kg

Condition: good (used), Year of construction: 1979, functionality: fully functional, spindle mount: MK 3, For sale is a pillar drilling machine from the brand Alzmetall in good, used condition, as can be seen in the pictures. Technical data: • Manufacturer: Alzmetall • Model: AB3-E • Speed: approx. 125 - 3,150 rpm • Spindle stroke: approx. 180 mm • Table size: approx. 520x400 mm • Year of manufacture: 1979 • Weight: approx. 360 kg Gsdpozvrmlefx Al Ujkc • Coolant pump can be connected • Condition: Used, functional The machine can be inspected and tested at any time! Shipping costs via freight forwarder: approx. €190 International buyers are welcome! You will receive an invoice with VAT shown. Inspection/collection is possible by arrangement in 42855 Remscheid. Sale ex works 42855 Remscheid, free loading. Errors in technical data and prior sale reserved.

Condition: used, machine/vehicle number: 5961, functionality: fully functional, power: 1.3 kW (1.77 HP), input voltage: 400 V, height adjustment type: mechanical, rotational speed (max.): 2,250 rpm, rotational speed (min.): 80 rpm, total width: 600 mm, total length: 1,000 mm, total height: 1,800 mm, throat depth: 293 mm, table width: 420 mm, table length: 300 mm, overall weight: 280 kg, Equipment: rotational speed infinitely variable, ALZMETALL AX 3 SV Pillar Drill Technical data / Features: Manufacturer: ALZMETALL Type: AX 3 SV Serial number: 5961 Spindle taper: MK 3 Spindle travel: 120 mm Overhang: 293 mm Table size: 420 x 300 mm Column diameter: 110 mm Continuously variable speed control 80 - 2250 rpm (in 2 gear stages + 2 motor stages) Automatic quill feed: 0.1 / 0.2 mm/rev Electrically monitored spindle guard Emergency stop button Quick-change drill chuck Godpfx Alezi A Nks Uekc Weight: approx. 280 kg Space requirement: 1000 x 600 x 1800 mm (L x W x H) Technical data subject to change without notice.

Condition: reconditioned (used), Year of construction: 1980, functionality: fully functional, For sale: a drilling and milling machine from Alzmetall. Gkedpozk U Dpjfx Al Ujc Type: Plus 3 DG. Inspection and test run possible at any time. Forklift available for loading.

Condition: good (used), Year of construction: 1986, machine/vehicle number: 5122, Offer 26250 Technical data: Drilling capacity in steel ST 60: 32 mm Drilling capacity in steel ST 60: 40 mm Long spindle, MK 3 Gkedpsz I Sd Sjfx Al Uec Drilling spindle speeds, continuously variable: 160 - 2250 rpm Drilling spindle stroke: 120 mm Overhang: 293 mm Column diameter: 115 mm Machined base plate with T-slots: 400 x 400 mm Max. distance from base plate to spindle: 600 mm Emergency stop button Space requirement: approx. W 450 x H 1250 x D 900 mm Weight: approx. 250 kg Quick-change drill chuck Table stand

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, ALZMETALL AX 4 / SV pillar drilling machine 3KW Manufacturer: Alzmetall Type: AX 4 / SV Condition: NEW Year of manufacture: 2025 Drilling capacity steel E335 (St 60) 55 mm Thread cutting Steel E335 (St 60) M 42 Cast EN-GJL-200 M 56 Short spindle MK 4 Spindle stroke 140 mm Usable projection 300 mm Column diameter 145 mm Machine table, usable support 615 x 430 mm Distance spindle-table min./max. 150/735 mm T-slots, number x width x distance 2 x 14 x 224 mm Feed 0.1 + 0.3 mm/rev Machine height approx. 1850 mm Net weight approx. 380 kg Drive stepless Motor 1500 rpm Power 3.0 kW Spindle speed rpm 70-2400 Standard equipment: Main switch with motor protection switch, lockable Mushroom push button (latching) for EMERGENCY STOP Speed adjustment stepless Speed display digital Feed overload protection Protection class IP 54 Spindle protection with electrical protection Paint: DD structural paint signal white RAL 9003, PANTONE 7545c, black Machine oil: initial filling; Container supplied loose Available options: Godpfx Aloy S Axgs Uskc - LED machine light - Thread cutting device with soft start (from 2025) - Coolant device in the base - Digital drilling depth display - Drilling depth fine adjustment 0.1 mm

Condition: used, Year of construction: 1996, functionality: fully functional, Alzmetall AX3 SV Pillar Drill Manufacturer: Alzmetall Type: AX3SV Year of manufacture: 1996 Condition: good, used Speed range: 160 – 2250 rpm Drilling capacity (St60) 40 mm Chuck/tool holder MK 3 Spindle stroke 120 mm Overhang 293 mm Column diameter 115 mm Distance spindle-table min./max. 117 / 701 mm Feed rate 0.1 + 0.2 mm/rev Net weight approx. 270 kg Special equipment: - Automatic feed - Spindle guard Gsdpfozy N Egsx Al Uskc

Condition: ready for operation (used), Bench drill / ALZMETALL AB 40 ST -Drilling capacity in steel approx. 50mm -Threading capacity max. M30 -Tool holder MK 4 -Spindle stroke approx. 160mm -Automatic feed rate 0.1-0.2-0.3-0.4mm/rev Gkodpfx Aszm Tb Esl Usc -Overhang approx. 300mm -Continuously variable speed adjustment (variator) -Right/left rotation -Height-adjustable work table via hand crank -Work table size approx. 740x460mm -Motor power approx. 3 kW Dimensions: L x W x H 1.2 x 0.8 x 2.2 meters / Weight approx. 1200 kg Errors and omissions excepted.

Condition: ready for operation (used), Bench drill – ALZMETALL AB 35 S - Drilling capacity in steel approx. 45 mm - Drilling capacity in cast iron approx. 48 mm - Spindle mount MK 4 - Arm reach approx. 350 mm - Drilling stroke approx. 180 mm - Spindle speeds / 2 stages / 65 - 1450 rpm (VARIABLE) Gsdpfx Aeznlf Eel Uokc - Automatic feed rates 0.1-0.2-0.3-0.4 mm/rev - Drilling depth stop - Table clamping surface approx. 600x460 mm - Table adjustment approx. 600 mm - Table height adjustable via crank - Column diameter approx. 200 mm - Motor power approx. 3.5 kW - Coolant system - Work light - Speed indicator Dimensions: L x W x H 1.1 x 0.7 x 2.1 meters / Weight approx. 1200 kg Errors and omissions excepted.

Condition: good (used), Year of construction: 1997, Well-maintained, used column drill from Alzmetall. Model: Alzstar 40 Capacity: 40mm. Gkodpsz H T Eujfx Al Usc

Condition: like new (used), functionality: fully functional, drilling capacity: 50 mm, As-new machine in particularly robust box frame design. Offered at a price reflecting its condition. Please, no private enquiries! Gedpezx N Ewofx Al Ujkc